-
Notifications
You must be signed in to change notification settings - Fork 2.5k
Migration Guide 2.0
The minimal JDK version supported by Quarkus 2.0 is JDK 11.
JDK 8 is not supported anymore.
Maven 3.8.1 is the new minimum Maven version. It fixes an important CVE so, in any case, it is highly recommended to upgrade to it.
We fixed some issues related to the Jandex indexer. Jandex itself is part of our BOM so will be upgraded automatically but if you use some Jandex build plugins, you need to upgrade them yourself.
- If you are using the Jandex Maven plugin, please upgrade it to 1.1.0.
- If you are using the Jandex Gradle plugin (
org.kordamp.gradle.jandex), please upgrade it to 0.11.0.
Quarkus @ConfigProperties has been deprecated in favour of SmallRye Config @ConfigMapping. Please, refer to the Mapping Configuration to Objects.
Mapping of YAML Configuration to complex objects has been removed from io.quarkus.arc.config.ConfigProperties. Please use io.smallrye.config.ConfigMapping instead which is a safer alternative.
smallrye.jwt.sign.key-location has been renamed to smallrye.jwt.sign.key.location and smallrye.jwt.encrypt.key-location - to smallrye.jwt.encrypt.key.location.
Avro has been integrated with the Quarkus code generation mechanism. To use it with Maven, make sure you have the generate-code
goal enabled for the quarkus-maven-plugin, it should be enabled by default if you created your project fairly recently.
For Gradle no specific task is required.
This replaces the need to use Avro plugin, such as the avro-maven-plugin, for projects that use Avro.
A new extension for Apicurio Registry 2.x client libraries for Avro is present: quarkus-apicurio-registry-avro.
If you use Apicurio Registry 2.x client libraries for Avro (io.apicurio:apicurio-registry-serdes-avro-serde), you have to use this extension now (otherwise application build will fail).
Support for Apicurio Registry 1.x client libraries for Avro, as well as Confluent Schema Registry libraries for Avro, is not affected.
The value app.quarkus.io/vcs-url is no longer converted to an http url and will now match the url of the origin remote. Users that need the prefer the use of the http protocol over git, will have to configure that on git level.
Services that are exposing http ports are now automatically mapped to port 80. The change makes the generated Service easier to consume by external tools, or services as knowledge of the actual container port is no longer needed by consumers.
This may affect services that were using the service dns name and container port combination to communicate with each other.
The Kubernetes Client has been upgraded to 5.4, which contains some breaking changes.
Please refer to the release notes for more details.
The io.quarkus.grpc.runtime.annotations.GrpcService annotation was renamed to io.quarkus.grpc.GrpcClient. Furthermore, the @GrpcClient.value() is optional and the service name can be derived from the annotated element.
gRPC service classes now have to be annotated with @io.quarkus.grpc.GrpcService instead of @javax.inject.Singleton.
The deprecated annotations from the io.quarkus.qute.api package were removed. All occurrences of @io.quarkus.qute.api.CheckedTemplate should be replaced with @io.quarkus.qute.CheckedTemplate and occurrences of @io.quarkus.qute.api.ResourcePath should be replaced with @io.quarkus.qute.Location.
Checked templates require type-safe expressions by default, i.e. expressions that can be validated at build time. It's possible to use @CheckedTemplate(requireTypeSafeExpressions = false) to relax this requirement.
Multiple NamespaceResolver instances can be registered for the same namespace provided that each declares a different priority.
The deprecated property quarkus.quartz.force-start was removed. Use quarkus.quartz.start-mode=forced instead.
The deprecated config value StoreType.DB was removed. quarkus.quartz.store-type=db should be replaced with quarkus.quartz.store-type=jdbc-cmt.
Anonymous requests to public resources with no matching Keycloak Authorization policies will now correctly return HTTP 200 status as opposed to 401. Adding DISABLED Keycloak Authorization policies in such cases is no longer necessary.
In 2.0, we removed some features that were deprecated for a while.
When we introduced the new /q mounting point for /health, /metrics, and other non-application endpoints,
the quarkus.http.redirect-to-non-application-root-path configuration property was provided to revert back to the previous behavior of not prefixing them with /q.
The property was deprecated and is now removed.
It is possible to achieve the previous behavior by explicitly setting endpoints to be absolute instead of relative. For instance, the Health endpoint can be forced to be available at /health instead of /q/health by setting quarkus.smallrye-health.root-path=/health.
Services using non-application endpoints, such as Prometheus ServiceMonitor, should be adjusted accordingly.
In order to collect statistics for your service, the service monitor YAML file should declare path: /q/metrics under
the endpoints declaration.
As of Quarkus 2.0, when the quarkus.container-image.username and quarkus.container-image.password properties are set, credentials from other locations (like the docker config on the file system) will be ignored
The configuration property datasource.reactive.max-size is now applied to the whole pool. In previous versions there was a Pool for each thread, leading to applying a separate max limit to each pool in each thread. There is a single Pool shared among all threads now, which is more intuitive to use and configure.
Quarkus 2.0 uses Vert.x 4.0. If your application relies on Vert.x APIs, check the Vert.x migration guide.
The enum of the HTTP verb to configure the methods attribute of a @Route has been moved to io.quarkus.vertx.web.Route.HttpMethod.
In Quarkus 2.0, Vert.x uses the Jackson Mapper managed by Quarkus. Thus, instead of configuring the JSON object mappers on the Json class, customize the Jackson Mapper following the instructions from https://quarkus.io/guides/rest-json#configuring-json-support.
The quarkus.neo4j.pool.metrics-enabled property that enables Neo4j metrics was renamed to quarkus.neo4j.pool.metrics.enabled to make the naming more consistent with similar properties in other extensions.
Accessing the default configuration of the Kafka broker must use the @Identifier annotation, instead of @Named:
@ApplicationScoped
public class KafkaProviders {
@Inject
@Identifier("default-kafka-broker") // was @Named before
Map<String, Object> config;
}The KafkaClientService.getProducer() method no longer returns org.apache.kafka.clients.producer.Producer.
Instead, it returns io.smallrye.reactive.messaging.kafka.KafkaProducer, which exposes the most common producer methods with a Uni-based interface.
The underlying reason is that the Kafka connector in SmallRye Reactive Messaging now sends all records to the Kafka broker on an extra thread, to guarantee fully non-blocking behavior.
By default, the Kafka client was connecting to localhost:9092 if the broker location was not configured.
In 2.0, Dev Services will start a broker and connect to this one. If you need to connect to a broker running on localhost:9092, you need to set kafka.bootstrap.servers=localhost:9092.
The old io.quarkus.mongodb.runtime.MongoClientName annotation that has been deprecated five release ago is now removed, please use io.quarkus.mongodb.MongoClientName instead.
The persist(), update() and persistOrUpdate() methods now return an Uni<T extends PanacheMongoEntityBase> instead of an Uni<Void> to allow chainning the methods. The same has been done for the Kotlin variant as well.
The getEntityManager() and the flush() methods of PanacheEntityBase are now static methods. The same has been done for the Kotlin variant, those methods are now in the PanacheEntityBase companion object.
The persist() and persistAndFlush() methods now return an Uni<T extends PanacheEntityBase> instead of an Uni<Void> to allow chainning the methods.
In Quarkus 2.0, we updated the version of the OpenTracing JDBC driver to a version that uses dynamic proxies, so not compatible by default with native image.
So, if you're using the OpenTracing JDBC driver to instrument JDBC calls, and deploys your application as a native image, the easiest way to make it work is to downgrade to version 0.2.4 inside your pom.xml:
<dependency>
<groupId>io.opentracing.contrib</groupId>
<artifactId>opentracing-jdbc</artifactId>
<version>0.2.4</version>
</dependency>You can also try to register the dynamic proxy usage for native image, see the details in the following issue: https://github.com/quarkusio/quarkus/issues/18033