Skip to content

xtreme-nitin-ravindran/consul-release

 
 

Repository files navigation

consul-release

This is a BOSH release for consul.

Contents

Using Consul

Consul is a distributed key-value store that provides a host of applications. It can be used to provide service discovery, key-value configuration, and distributed locks within cloud infrastructure environments.

Within CloudFoundry

Principally, Consul is used to provide service discovery for many of the components. Components can register services with Consul, making these services available to other CloudFoundry components. A component looking to discover other services would run a Consul agent locally, and lookup services using DNS names. Consul transparently updates the DNS records across the cluster as services start and stop, or pass/fail their health checks.

Additionally, Consul is able to store key-value data across its distributed cluster. CloudFoundry makes use of this feature by storing some simple configuration data, making it reachable across all nodes in the cluster.

CloudFoundry also makes some use of Consul's distributed locks. This feature is used to ensure that one, and only one, component is able to perform some critical action at a time.

Fault Tolerance and Data Durability

Consul is a distributed data-store and as such, conforms to some form of fault tolerance under disadvantageous conditions. Broadly, these tolerances are described by the CAP Theorem, specifying that a distributed computer system cannot provide all three of the guarantees outlined in the theorem (consistency, availability, and partition tolerance). In the default configuration, Consul has a preference to guarantee consistency and partition tolerance over availability. This means that under network partitioning, the cluster can become unavailable. The unavailability of the cluster can result in the inability to write to the key-value store, maintain or acquire distributed locks, or discover other services. Consul makes this tradeoff with a preference for consistency of the stored data in the case of network partitions. The Consul team has published some results from their testing of Consul's fault tolerance.

This behavior means that Consul may not be the best choice for persisting critically important data. Not having explicitly supported backup-and-restore workflows also makes guaranteeing data durability difficult.

Deploying

In order to deploy consul-release you must follow the standard steps for deploying software with BOSH.

We assume you have already deployed and targeted a BOSH director. For more instructions on how to do that please see the BOSH documentation.

1. Uploading a stemcell

Find the "BOSH Lite Warden" stemcell you wish to use. bosh.io provides a resource to find and download stemcells. Then run bosh upload stemcell STEMCELL_URL_OR_PATH_TO_DOWNLOADED_STEMCELL.

2. Creating a release

From within the consul-release director run bosh create release --force to create a development release.

3. Uploading a release

Once you've created a development release run bosh upload release to upload your development release to the director.

4. Using a sample deployment manifest

We provide a set of sample deployment manifests that can be used as a starting point for creating your own manifest, but they should not be considered comprehensive. They are located in manifests/aws and manifests/bosh-lite.

5. Deploy.

Run bosh -d OUTPUT_MANIFEST_PATH deploy.

Configuring

Generating Keys and Certificates

We only support running Consul in secure mode, you will need to provide certificates and keys for Consul.

  1. Generate SSL Certificates and Keys: To generate the certificates and keys that you need for Consul, we recommend using certstrap. This repository contains a helper script, scripts/generate-certs. This script uses certstrap to initialize a certificate authority (CA), and generate the certificates and keys for Consul.

  2. All servers must have a certificate valid for server.<datacenter>.<domain> or the client will reject the handshake. For a default consul configuration, this means that a server certificate with the common name server.dc1.cf.internal will need to be created. Further documentation concerning TLS encryption may be found on the official consul documentation.

If you already have a CA, you may have an existing workflow. You can modify the generate-certs script to use your existing CA instead of generating a new one.

The generate-certs script outputs files to the ./consul-certs directory.

  1. Create Gossip Encryption Keys: To create an encryption key for use in the serf gossip protocol, provide an arbitrary string value. The consul agent job template transforms this string into a 16-byte Base64-encoded value for consumption by the consul process.

  2. Update your manifest: Copy the contents of each file in the ./consul-certs directory, as well as the value for your Gossip encryption key, into the proper sections of your manifest.

For reference see below:

properties:
  consul:
    encrypt_keys:
    - RANDOM-SECRET-VALUE
    ca_cert: |
      -----BEGIN CERTIFICATE-----
      ###########################################################
      #######           Your New CA Certificate           #######
      ###########################################################
      -----END CERTIFICATE-----
    agent_cert: |
      ----BEGIN CERTIFICATE----
      ###########################################################
      #######           Your New Agent Certificate        #######
      ###########################################################
      ----END CERTIFICATE----
    agent_key: |
      -----BEGIN RSA PRIVATE KEY-----
      ###########################################################
      #######           Your New Agent Key                #######
      ###########################################################
      -----END RSA PRIVATE KEY-----
    server_cert: |
      ----BEGIN CERTIFICATE----
      ###########################################################
      #######           Your New Server Certificate       #######
      ###########################################################
      ----END CERTIFICATE----
      ----BEGIN CERTIFICATE----
      ###########################################################
      #######           Your New CA Certificate           #######
      ###########################################################
      ----END CERTIFICATE----
    server_key: |
      -----BEGIN RSA PRIVATE KEY-----
      ###########################################################
      #######           Your New Server Key               #######
      ###########################################################
      -----END RSA PRIVATE KEY-----

Rotating Certificates and Keys

Reference the Security Configuration for Consul in the CloudFoundry Docs for steps on rotating certificates and keys.

Defining a Service

This Consul release allows consumers to declare services provided by jobs that should be discoverable over DNS. Consul achieves this behavior by consuming a service definition. A service definition can be given to consul by providing some configuration information in the manifest properties for the given job.

Below is an example manifest snippet that provides a service for a hypothetical database:

1 jobs:
2 - name: database
3   instances: 3
4   networks:
5   - name: default
6   resource_pool: default
7   templates:
8   - name: database
9     release: database
10  - name: consul_agent
11    release: consul
12  properties:
13    consul:
14      agent:
15        services:
16          big_database:
17            name: big_database
18            tags:
19            - db
20            - persistence
21            check:
22              script: /bin/check_db
23              interval: 10s

In this example we are defining a "database" service that we want to make available through Consul's service discovery mechanism. The first step is to include the consul_agent template on the "database" job. We can see this addition on lines 10-11. Once this template has been added, we can include the service definition (lines 15-23). We define a service called "big_database" that defines its service health check. The health check is used to determine the health of a service and will automatically register/deregister that service with the discovery system depending upon the status of that check. The structure of a service definition follows the same structure as they would be defined in JSON, but translated into YAML to fit into a manifest. More information about service registration can be found here.

Note: When running on Windows VMs, we use powershell. To honor the exit code of the health check script, we wrap the script as follows: powershell -Command some_script.ps1; Exit $LASTEXITCODE. Any user provided script should do the same.

Health Checks

Health checks provide another level of functionality to the service discovery mechanism of Consul. When a service is defined with a health check, it can be registered/deregistered from the service discovery system. This means that were a service like a hypothetical "database" to experience some loss in availability, Consul would notice and update the service discovery entries to route traffic around or away from that service. Defining health checks can be done in several ways. The documentation provides several examples of health check definitions, including script, HTTP, TCP, TTL, and Docker-based examples.

When a service is defined without an explicit health check, the consul_agent job will provide a default check. That check is the equivalent of the following:

jobs:
- name: database
  instances: 3
  networks:
  - name: default
  resource_pool: default
  templates:
  - name: database
    release: database
  - name: consul_agent
    release: consul
  properties:
    consul:
      agent:
        services:
          database:
            check:
              name: dns_health_check
              script: /var/vcap/jobs/database/bin/dns_health_check
              interval: 3s

In the check section of that definition, we can see that it assumes a script called dns_health_check is located in the /var/vcap/jobs/SERVICE_NAME/bin directory. Not providing this script, and not explicitly defining some other check in your service definition will result in a failing health check for the service. If you wish to disable the health check for a service, you can specify an empty check section. For example:

jobs:
- name: database
  ...
  properties:
    consul:
      agent:
        services:
          database:
            check: {}

Known Issues

1-node clusters

It is not recommended to run a 1-node cluster in any "production" environment. Having a 1-node cluster does not ensure any amount of data persistence.

WARNING: Scaling your cluster to or from a 1-node configuration may result in data loss.

Failure Recovery

TLS Certificate Issues

A common source of failure is TLS certification configuration. If you have a failed deploy and see errors related to certificates, authorities, "crypto", etc. it's a good idea to confirm that:

  • all Consul-related certificates and keys in your manifest are correctly PEM-encoded;
  • certificates match their corresponding keys;
  • certificates have been signed by the appropriate CA certificate; and
  • the YAML syntax of your manifest is correct.

Failed Deploys, Upgrades, Split-Brain Scenarios, etc.

In the event that the consul cluster ends up in a bad state that is difficult to debug, a simple

bosh restart consul_server

should fix the cluster.

If the consul cluster does not recover via the above method, you have the option of stopping the consul agent on each server node, removing its data store, and then restarting the process:

monit stop consul_agent (on all server nodes in consul cluster)
rm -rf /var/vcap/store/consul_agent/* (on all server nodes in consul cluster)
monit start consul_agent (one-by-one on each server node in consul cluster)

There are often more graceful ways to solve specific issues, but it is hard to document all of the possible failure modes and recovery steps. As long as your Consul cluster does not contain critical data that cannot be repopulated, this option is safe and will probably get you unstuck. If you are debugging a Consul server cluster in the context of a Cloud Foundry deployment, it is indeed safe to follow the above steps.

Additional information about outage recovery can be found on the consul documentation page.

Frequent Disappearance of Registered Services

Many BOSH jobs that colocate the consul_agent process do so in order to register a service with Consul so that other jobs within the system can discover them. If you observe frequent service discovery failures affecting many services, this may be due to something affecting Consul's gossip protocol. Common causes include:

  • network latency;
  • network failures such as high packet loss;
  • firewalls/ACLs preventing some consul_agents communicating with others over TCP on port 8300 and both TCP and UDP on port 8301; and
  • having a very large number of VMs driving CPU requirements for the consul_agents too high for the current resources allocated to their VMs.

Contributing

Contributor License Agreement

Contributors must sign the Contributor License Agreement before their contributions can be merged. Follow the directions here to complete that process.

Developer Workflow

Make sure that you are working against the develop branch. PRs submitted against other branches will need to be resubmitted with the correct branch targeted.

Before submitting a PR, make sure to run the test suites. Information about how to run the suites can be seen in the Confab Tests and Acceptance Tests sections.

Confab Tests

Run the confab tests by executing the src/confab/scripts/test executable.

Acceptance Tests

The acceptance tests deploy a new consul cluster and exercise a variety of features, including scaling the number of nodes, as well as destructive testing to verify resilience.

Prerequisites

The following should be installed on the local machine:

  • jq
  • Golang (>= 1.7)

If using homebrew, these can be installed with:

brew install consul go jq

Network setup

BOSH-Lite

Make sure you’ve run bin/add-route and bin/enable_container_internet. This will setup some routing rules to give the tests access to the consul VMs.

AWS

You will want to run CONSATS from a VM within the same subnet specified in your manifest. This assumes you are using a private subnet within a VPC.

Environment setup

This repository assumes that it is the root of your GOPATH. You can set this up by doing the following:

source .envrc

Or if you have direnv installed:

direnv allow

Running the CONSATS

Running locally

Run all the tests with:

CONSATS_CONFIG=[config_file.json] ./scripts/test

Run a specific set of tests with:

CONSATS_CONFIG=[config_file.json] ./scripts/test <some test packages>

The CONSATS_CONFIG environment variable points to a configuration file which specifies the endpoint of the BOSH director. When specifying location of the CONSATS_CONFIG, it must be an absolute path on the filesystem.

See below for more information on the contents of this configuration file.

CONSATS config

An example config json for BOSH-lite would look like:

cat > integration_config.json << EOF
{
  "bosh":{
    "target": "192.168.50.4",
    "username": "admin",
    "password": "admin"
  }
}
EOF
export CONSATS_CONFIG=$PWD/integration_config.json

The full set of config parameters is explained below:

  • bosh.target (required) Public BOSH IP address that will be used to host test environment
  • bosh.username (required) Username for the BOSH director login
  • bosh.password (required) Password for the BOSH director login
  • bosh.director_ca_cert BOSH Director CA Cert
  • aws.subnet Subnet ID for AWS deployments
  • aws.access_key_id Key ID for AWS deployments
  • aws.secret_access_key Secret Access Key for AWS deployments
  • aws.default_key_name Default Key Name for AWS deployments
  • aws.default_security_groups Security groups for AWS deployments
  • aws.region Region for AWS deployments
  • registry.host Host for the BOSH registry
  • registry.port Port for the BOSH registry
  • registry.username Username for the BOSH registry
  • registry.password Password for the BOSH registry

Running as BOSH errand

Dependencies

The acceptance-tests BOSH errand assumes that the BOSH director has already uploaded the correct versions of the dependent releases. The required releases are:

For BOSH-Lite:

For AWS:

Creating a consats deployment manifest

We provide an example deployment manifest for running the errand on AWS. The manifest can be used by replacing all of the placeholder values in the file manifests/aws/consats.yml.

Deploying the errand

Run bosh deployment manifests/aws/consats.yml. Run bosh deploy.

Running the errand

Run bosh run errand acceptance-tests

About

No description, website, or topics provided.

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Go 93.0%
  • Shell 4.1%
  • HTML 2.8%
  • PowerShell 0.1%