chore(dependencies): update dependency coverage to v5 - autoclosed #81

renovate · 2019-12-14T16:38:41Z

This PR contains the following updates:

Package	Change	Age	Adoption	Passing	Confidence
coverage	`==4.5.4` -> `==5.5`

Release Notes

nedbat/coveragepy

`v5.5`

Compare Source

coverage combine has a new option, --keep to keep the original data
files after combining them. The default is still to delete the files after
they have been combined. This was requested in issue 1108_ and implemented
in pull request 1110_. Thanks, Éric Larivière.
When reporting missing branches in coverage report, branches aren't
reported that jump to missing lines. This adds to the long-standing behavior
of not reporting branches from missing lines. Now branches are only reported
if both the source and destination lines are executed. Closes both issue 1065_ and issue 955_.
Minor improvements to the HTML report:
- The state of the line visibility selector buttons is saved in local storage
  so you don't have to fiddle with them so often, fixing issue 1123_.
- It has a little more room for line numbers so that 4-digit numbers work
  well, fixing issue 1124_.
Improved the error message when combining line and branch data, so that users
will be more likely to understand what's happening, closing issue 803_.

.. _issue 803:https://github.com/nedbat/coveragepy/issues/8033
.. _issue 955https://github.com/nedbat/coveragepy/issues/95555
.. _issue 106https://github.com/nedbat/coveragepy/issues/1065065
.. _issue 11https://github.com/nedbat/coveragepy/issues/11081108
.. _pull request 1https://github.com/nedbat/coveragepy/pull/1110/1110
.. _issue https://github.com/nedbat/coveragepy/issues/1123s/1123
.. _issuehttps://github.com/nedbat/coveragepy/issues/1124es/1124

.. _changes_54:

`v5.4`

Compare Source

The text report produced by coverage report now always outputs a TOTAL
line, even if only one Python file is reported. This makes regex parsing
of the output easier. Thanks, Judson Neer. This had been requested a number
of times (issue 1086, issue 922, issue 732_).
The skip_covered and skip_empty settings in the configuration file
can now be specified in the [html] section, so that text reports and HTML
reports can use separate settings. The HTML report will still use the
[report] settings if there isn't a value in the [html] section.
Closes issue 1090_.
Combining files on Windows across drives now works properly, fixing issue 577. Thanks, Valentin Lab <pr1080_>.
Fix an obscure warning from deep in the decimal module, as reported in
issue 1084.
Update to support Python 3.10 alphas in progress, including PEP 626: Precise line numbers for debugging and other tools <pep626_>_.

.. _issue 577:https://github.com/nedbat/coveragepy/issues/5777
.. _issue 732https://github.com/nedbat/coveragepy/issues/73232
.. _issue 92https://github.com/nedbat/coveragepy/issues/922922
.. _issue 10https://github.com/nedbat/coveragepy/issues/10841084
.. _issue 1https://github.com/nedbat/coveragepy/issues/1086/1086
.. _issue https://github.com/nedbat/coveragepy/issues/1090s/1090
.. _phttps://github.com/nedbat/coveragepy/pull/1080ll/1080
.. _pep626: https://www.python.org/dev/peps/pep-0626/

.. _changes_531:

`v5.3.1`

Compare Source

When using --source on a large source tree, v5.x was slower than previous
versions. This performance regression is now fixed, closing issue 1037_.
Mysterious SQLite errors can happen on PyPy, as reported in issue 1010_. An
immediate retry seems to fix the problem, although it is an unsatisfying
solution.
The HTML report now saves the sort order in a more widely supported way,
fixing issue 986. Thanks, Sebastián Ramírez (pull request 1066).
The HTML report pages now have a :ref:Sleepy Snake <sleepy> favicon.
Wheels are now provided for manylinux2010, and for PyPy3 (pp36 and pp37).
Continuous integration has moved from Travis and AppVeyor to GitHub Actions.

.. _issue 986:https://github.com/nedbat/coveragepy/issues/9866
.. _issue 1037https://github.com/nedbat/coveragepy/issues/103737
.. _issue 101https://github.com/nedbat/coveragepy/issues/1010010
.. _pull request 10https://github.com/nedbat/coveragepy/pull/10661066

.. _changes_53:

`v5.3`

Compare Source

When using --source on a large source tree, v5.x was slower than previous
versions. This performance regression is now fixed, closing issue 1037_.
Mysterious SQLite errors can happen on PyPy, as reported in issue 1010_. An
immediate retry seems to fix the problem, although it is an unsatisfying
solution.
The HTML report now saves the sort order in a more widely supported way,
fixing issue 986. Thanks, Sebastián Ramírez (pull request 1066).
The HTML report pages now have a :ref:Sleepy Snake <sleepy> favicon.
Wheels are now provided for manylinux2010, and for PyPy3 (pp36 and pp37).
Continuous integration has moved from Travis and AppVeyor to GitHub Actions.

.. _issue 986:https://github.com/nedbat/coveragepy/issues/9866
.. _issue 1037https://github.com/nedbat/coveragepy/issues/103737
.. _issue 101https://github.com/nedbat/coveragepy/issues/1010010
.. _pull request 10https://github.com/nedbat/coveragepy/pull/10661066

.. _changes_53:

`v5.2.1`

Compare Source

The dark mode HTML report still used light colors for the context listing, making them unreadable (issue 1009). This is now fixed.
The time stamp on the HTML report now includes the time zone. Thanks, Xie Yanbo (pull request 960).

`v5.2`

Compare Source

The HTML report has been redesigned by Vince Salvino. There is now a dark mode, the code text is larger, and system sans serif fonts are used, in addition to other small changes (issue 858 and pull request 931).
The coverage report and coverage html commands now accept a --precision option to control the number of decimal points displayed. Thanks, Teake Nutma (pull request 982).
The coverage report and coverage html commands now accept a --no-skip-covered option to negate --skip-covered. Thanks, Anthony Sottile (issue 779 and pull request 932).
The --skip-empty option is now available for the XML report, closing issue 976.
The coverage report command now accepts a --sort option to specify how to sort the results. Thanks, Jerin Peter George (pull request 1005).
If coverage fails due to the coverage total not reaching the --fail-under value, it will now print a message making the condition clear. Thanks, Naveen Yadav (pull request 977).
TOML configuration files with non-ASCII characters would cause errors on Windows (issue 990). This is now fixed.
The output of --debug=trace now includes information about how the --source option is being interpreted, and the module names being considered.

`v5.1`

Compare Source

The JSON report now includes counts of covered and missing branches. Thanks, Salvatore Zagaria.
On Python 3.8, try-finally-return reported wrong branch coverage with decorated async functions (issue 964). This is now fixed. Thanks, Kjell Braden.
The get_option() and set_option() methods can now manipulate the [paths] configuration setting. Thanks to Bernát Gábor for the fix for issue 967.

`v5.0.4`

Compare Source

If using the [run] relative_files setting, the XML report will use relative files in the <source> elements indicating the location of source code. Closes issue 948.
The textual summary report could report missing lines with negative line numbers on PyPy3 7.1 (issue 943). This is now fixed.
Windows wheels for Python 3.8 were incorrectly built, but are now fixed. (issue 949)
Updated Python 3.9 support to 3.9a4.
HTML reports couldn’t be sorted if localStorage wasn’t available. This is now fixed: sorting works even though the sorting setting isn’t retained. (issue 944 and pull request 945). Thanks, Abdeali Kothari.

`v5.0.3`

Compare Source

A performance improvement in 5.0.2 didn’t work for test suites that changed directory before combining data, causing “Couldn’t use data file: no such table: meta” errors (issue 916). This is now fixed.
Coverage could fail to run your program with some form of “ModuleNotFound” or “ImportError” trying to import from the current directory. This would happen if coverage had been packaged into a zip file (for example, on Windows), or was found indirectly (for example, by pyenv-virtualenv). A number of different scenarios were described in issue 862 which is now fixed. Huge thanks to Agbonze O. Jeremiah for reporting it, and Alexander Waters and George-Cristian Bîrzan for protracted debugging sessions.
Added the “premain” debug option.
Added SQLite compile-time options to the “debug sys” output.

`v5.0.2`

Compare Source

Programs that used multiprocessing and changed directories would fail under coverage. This is now fixed (issue 890). A side effect is that debug information about the config files read now shows absolute paths to the files.
When running programs as modules (coverage run -m) with --source, some measured modules were imported before coverage starts. This resulted in unwanted warnings (“Already imported a file that will be measured”) and a reduction in coverage totals (issue 909). This is now fixed.
If no data was collected, an exception about “No data to report” could happen instead of a 0% report being created (issue 884). This is now fixed.
The handling of source files with non-encodable file names has changed. Previously, if a file name could not be encoded as UTF-8, an error occurred, as described in issue 891. Now, those files will not be measured, since their data would not be recordable.
A new warning (“dynamic-conflict”) is issued if two mechanisms are trying to change the dynamic context. Closes issue 901.
coverage run --debug=sys would fail with an AttributeError. This is now fixed (issue 907).

`v5.0.1`

Compare Source

If a 4.x data file is the cause of a “file is not a database” error, then use a more specific error message, “Looks like a coverage 4.x data file, are you mixing versions of coverage?” Helps diagnose the problems described in issue 886.
Measurement contexts and relative file names didn’t work together, as reported in issue 899 and issue 900. This is now fixed, thanks to David Szotten.
When using coverage run --concurrency=multiprocessing, all data files should be named with parallel-ready suffixes. 5.0 mistakenly named the main process’ file with no suffix when using --append. This is now fixed, closing issue 880.
Fixed a problem on Windows when the current directory is changed to a different drive (issue 895). Thanks, Olivier Grisel.
Updated Python 3.9 support to 3.9a2.

`v5.0`

Compare Source

Nothing new beyond 5.0b2.

Configuration

📅 Schedule: At any time (no schedule defined).

🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.

♻ Rebasing: Whenever PR is behind base branch, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about this update again.

If you want to rebase/retry this PR, click this checkbox.

This PR has been generated by WhiteSource Renovate. View repository job log here.

codecov · 2019-12-22T18:28:29Z

Codecov Report

Merging #81 (27d72d0) into master (bd8495b) will not change coverage.
The diff coverage is n/a.

@@           Coverage Diff           @@
##           master      #81   +/-   ##
=======================================
  Coverage   92.24%   92.24%           
=======================================
  Files           1        1           
  Lines         116      116           
=======================================
  Hits          107      107           
  Misses          9        9

Continue to review full report at Codecov.

Legend - Click here to learn more
Δ = absolute <relative> (impact), ø = not affected, ? = missing data
Powered by Codecov. Last update bd8495b...deac985. Read the comment docs.

sonarcloud · 2020-01-12T12:29:32Z

Kudos, SonarCloud Quality Gate passed!

0 Bugs
0 Vulnerabilities (and 0 Security Hotspots to review)
0 Code Smells