Skip to content

A ROS wrapper for ORB-SLAM3. Focus on portability and flexibility.

Notifications You must be signed in to change notification settings

thien94/orb_slam3_ros_wrapper

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

11 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

ROS wrapper for ORB-SLAM3

A ROS wrapper for ORB-SLAM3. The main idea is to use the ORB-SLAM3 as a standalone library and interface with it instead of putting everything together. For that, you can check out this package.

Tested with ORB-SLAM3 V1.0, primarily on Ubuntu 20.04.

  • Pros:
    • Easy to update ORB-SLAM3 indepedently.
    • Easy to replace different variants that are not built for ROS.
  • Cons:
    • Dependent on the exposed APIs from ORB-SLAM3.
    • Development involves more steps (1. Make changes in ORB-SLAM3 library -> 2. Build ORB-SLAM3 -> 3. Change the roswrapper if necessary -> 4. Test).
    • Might break when dependencies or upstream changes.

Installation

General guide: first, install ORB-SLAM3 normally with all of its dependencies (any location is fine). Then, install this package in a catkin build environment.

1. ORB-SLAM3

cd ~
git clone https://github.com/UZ-SLAMLab/ORB_SLAM3.git ORB_SLAM3
  • Make changes to the source code if necessary to build successfully. For Ubuntu 20.04, you will need to change CMakeList from C++11 to C++14. I have incorporated the changes in this fork.
  • Build:
cd ORB_SLAM3
chmod +x build.sh
./build.sh
  • Make sure that libORB_SLAM3.so is created in the ORB_SLAM3/lib folder. If not, check the issue list from the original repo and retry.

2. orb_slam3_ros_wrapper

  • Clone the package. Note that it should be a catkin build workspace.
cd ~/catkin_ws/src/
git clone https://github.com/thien94/orb_slam3_ros_wrapper.git
  • Open CMakeLists.txt and change the directory that leads to ORB-SLAM3 library at the beginning of the file (default is home folder ~/)
cd ~/catkin_ws/src/orb_slam3_ros_wrapper/
nano CMakeLists.txt

# Change this to your installation of ORB-SLAM3. Default is ~/
set(ORB_SLAM3_DIR
   $ENV{HOME}/ORB_SLAM3
)
  • Build the package normally.
cd ~/catkin_ws/
catkin build
  • Next, copy the ORBvoc.txt file from ORB-SLAM3/Vocabulary/ folder to the config folder in this package. Alternatively, you can change the voc_file param in the launch file to point to the right location.

  • (Optional) Install hector-trajectory-server to visualize the trajectory.

sudo apt install ros-[DISTRO]-hector-trajectory-server
  • If everything works fine, you can now try the different launch files in the launch folder.

3. How to run

EuRoC dataset:

  • In one terminal, launch the node:
roslaunch orb_slam3_ros_wrapper euroc_monoimu.launch
  • In another terminal, playback the bag:
rosbag play MH_01_easy.bag

Similarly for other sensor types.

Topics

The following topics are published by each node:

  • /orb_slam3/map_points (PointCloud2): all keypoints being tracked.
  • /orb_slam3/camera_pose (PoseStamped): current left camera pose in world frame, as returned by ORB-SLAM3.
  • tf: transformation from camera frame to world frame.

Params

  • Enable / disable pangolin viewer: enable_pangolin
  • For monocular/stereo case, use world_roll, world_pitch, world_yaw in the launch file to rotate the world frame if necessary (otherwise the first KF will be the world frame). The world frame will be rotated by the provided roll-pitch-yaw angles (in rad) in that order.

About

A ROS wrapper for ORB-SLAM3. Focus on portability and flexibility.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published