Skip to content

Get data from dh22 running on esp32 and sends Prometheus metrics via pushgateway

License

Notifications You must be signed in to change notification settings

szuecs/esp32-dh22-metrics

Repository files navigation

esp32-dh22-metrics

Get data from AM2302 (dh22) running on an esp32 and sends Prometheus metrics to a pushgateway using WiFi. Prometheus can scrape metrics from the pushgateway and you can use grafana to show nice dashboards.

Features

You can select different serial output and push data types. Both supports CSV, JSON and Prometheus data. Serial output defaults to CSV and push data defaults to Prometheus.

All data and functions exported by https://github.com/beegee-tokyo/DHTesp library are used to provide the metrics.

Requirements

Hardware:

  • dev board: ESP32
  • sensor: AM2302 (dh22)
  • USB connector to connect your computer with ESP32 (power and flash)
  • 3 cable connectors to connect sensor with ESP32 (power, ground, GPIO data), see also page 2 picture and table top left

Software:

  • pushgateway should be running, for example: docker run -d -hostnetwork -p 9091:9091 prom/pushgateway
  • C++ dev package to have unordered_map, should be available.

You can find a nice tutorial at techtutorialsx.

Install

Install Arduino IDE and start Arduino IDE.

Install dependencies:

  1. Install in the IDE: Board "ESP32 Dev Module" (Tools -> Manage Libraries..)
  2. Install in the IDE: beegee-tokyo DHTesp https://github.com/beegee-tokyo/DHTesp (Tools -> Manage Libraries..)

First steps:

  1. If you have the hardware connected and all dependencies setup, clone this repository
  2. Open File -> Open... dialog to open the cloned repository and select file esp32-dh22-metrics.ino
  3. Change file esp32-dh22-metrics.ino line 10-13 to your own setup
  4. click Tools -> Port and select your USB serial port to configure the connection from your computer to ESP32.
  5. click the Upload button to flash your ESP32 and run the software
  6. Open the Tools -> Serial Monitor to show the serial output of the software running on your ESP32, after a few seconds you should get some data output, if it was successful
  7. Check metrics endpoint of the running pushgateway
% curl -s http://127.0.0.1:9091/metrics | grep dh22
absolute_humidity{instance="dc",job="dh22"} 9
comfort_status{instance="dc",job="dh22",state="Comfort_OK"} 1
dew_point{instance="dc",job="dh22"} 9.9
distance_too_cold{instance="dc",job="dh22"} 1
distance_too_dry{instance="dc",job="dh22"} -1624.1
distance_too_hot{instance="dc",job="dh22"} -7.7
distance_too_humid{instance="dc",job="dh22"} -1079.4
heat_index{instance="dc",job="dh22"} 19.7
humidity{instance="dc",job="dh22"} 51
push_failure_time_seconds{instance="dc",job="dh22"} 0
push_time_seconds{instance="dc",job="dh22"} 1.578165888371657e+09
temperature_celsius{instance="dc",job="dh22"} 20.3
too_cold{instance="dc",job="dh22"} 1
too_dry{instance="dc",job="dh22"} 0
too_hot{instance="dc",job="dh22"} 0
too_humid{instance="dc",job="dh22"} 0

Development

Please create issues and Pull requests as you like.

License

LICENSE

About

Get data from dh22 running on esp32 and sends Prometheus metrics via pushgateway

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages