action-docker-sign

Sign your Docker images using Docker Content Trust (DCT) !

Complete example

You can forge the key following this manual

/!\ Be sure to save in a safe place your root key

/!\ Do not use the repository or root key here, use a created delegated key

name: Publish Docker image on tag push

permissions:
  contents: read

on:
  push:
    tags:
       # Only the tag named latest
       - 'latest'

jobs:
  push-to-registry:
    name: Push Docker image to Docker hub
    runs-on: ubuntu-latest
    steps:
        - name: Check out the repository
          uses: actions/checkout@v4
        - name: Login to DockerHub
          uses: docker/login-action@v3
          with:
            registry: docker.io
            username: ${{ secrets.DOCKER_REPOSITORY_LOGIN }}
            password: ${{ secrets.DOCKER_REPOSITORY_PASSWORD }}
        - name: Build action image
          # Use any good build command and be sure to tag the image correctly
          run: make docker-build
          env:
            IMAGE_TAG: "docker.io/botsudo/action-docker-compose:latest"

        - name: Sign and push docker image
          uses: sudo-bot/action-docker-sign@latest
          with:
            image-ref: "docker.io/botsudo/action-docker-compose:latest"
            # Example: 51f9a39f3db4ddaaf9174fca69f41fb01a04a4dfb5125ef115feecb93d19efa6
            private-key-id: "${{ secrets.DOCKER_PRIVATE_KEY_ID }}"
            # The contents from: ~/.docker/trust/private/51f9a39f3db4ddaaf9174fca69f41fb01a04a4dfb5125ef115feecb93d19efa6.key)
            private-key: ${{ secrets.DOCKER_PRIVATE_KEY }}
            # Example: myPassw0rdChangeMeReplaceMe
            private-key-passphrase: ${{ secrets.DOCKER_PRIVATE_KEY_PASSPHRASE }}

Example with docker buildx using manifests

name: Publish Docker image

permissions:
    contents: read

on:
    push:
        tags:
            - "v*"

jobs:
    push-to-registry:
        name: Push Docker image to Docker hub
        runs-on: ubuntu-latest
        strategy:
            fail-fast: false
            max-parallel: 4
            matrix:
                include:
                    # All non supported by base image are commented
                    # This is an example for base image alpine
                    - { platform: "linux/arm64", platform-tag: "arm64" }
                    - { platform: "linux/amd64", platform-tag: "amd64" }
                    - { platform: "linux/arm/v7", platform-tag: "armv7" }
                    - { platform: "linux/arm/v6", platform-tag: "armv6" }
                    - { platform: "linux/ppc64le", platform-tag: "ppc64le" }
                    #- { platform: "linux/riscv64", platform-tag: "riscv64" }
                    - { platform: "linux/s390x", platform-tag: "s390x" }
                    - { platform: "linux/386", platform-tag: "386" }
                    #- { platform: "linux/mips64le", platform-tag: "mips64le" }
                    #- { platform: "linux/mips64", platform-tag: "mips64" }

        steps:
            - name: Check out the repository
              uses: actions/checkout@v4
            - name: Login to DockerHub
              uses: docker/login-action@v3
              with:
                  registry: docker.io
                  username: ${{ secrets.DOCKER_REPOSITORY_LOGIN }}
                  password: ${{ secrets.DOCKER_REPOSITORY_PASSWORD }}
            # https://github.com/docker/setup-qemu-action
            - name: Set up QEMU
              uses: docker/setup-qemu-action@v3
            # https://github.com/docker/setup-buildx-action
            - name: Set up Docker Buildx
              uses: docker/setup-buildx-action@v3
            - name: Build and push the image
              run: make docker-build
              env:
                  DOCKER_BUILDKIT: 1
                  PLATFORM: "${{ matrix.platform }}"
                  IMAGE_TAG: "docker.io/botsudo/nut-upsd:${{ matrix.platform-tag }}-latest"
                  ACTION: push

            - name: Sign the docker image
              uses: sudo-bot/action-docker-sign@latest
              with:
                  image-ref: "docker.io/botsudo/nut-upsd:${{ matrix.platform-tag }}-latest"
                  private-key-id: "${{ vars.DOCKER_PRIVATE_KEY_ID }}"
                  # Must be exported using notary key export -d ~/.docker/trust --key ${{ vars.DOCKER_PRIVATE_KEY_ID }}
                  # Use the delegated key or the repository key
                  private-key: ${{ secrets.DOCKER_PRIVATE_KEY }}
                  private-key-passphrase: ${{ secrets.DOCKER_PRIVATE_KEY_PASSPHRASE }}

    sign-manifest:
        name: Sign the docker hub manifest
        runs-on: ubuntu-latest
        needs: push-to-registry
        steps:
            - name: Login to DockerHub
              uses: docker/login-action@v3
              with:
                  registry: docker.io
                  username: ${{ secrets.DOCKER_REPOSITORY_LOGIN }}
                  password: ${{ secrets.DOCKER_REPOSITORY_PASSWORD }}
            - name: Create a manifest
              env:
                  DOCKER_CLI_EXPERIMENTAL: enabled
              run: |
                  docker manifest create docker.io/botsudo/nut-upsd:latest \
                      docker.io/botsudo/nut-upsd:arm64-latest \
                      docker.io/botsudo/nut-upsd:amd64-latest \
                      docker.io/botsudo/nut-upsd:armv7-latest \
                      docker.io/botsudo/nut-upsd:armv6-latest \
                      docker.io/botsudo/nut-upsd:ppc64le-latest \
                      docker.io/botsudo/nut-upsd:s390x-latest \
                      docker.io/botsudo/nut-upsd:386-latest \
                      --amend

            - name: Sign the manifest
              uses: sudo-bot/action-docker-sign@latest
              with:
                  image-ref: "docker.io/botsudo/nut-upsd:latest"
                  # Sign the manifest
                  sign-manifest: true
                  # Use the delegated key or the repository key
                  private-key-id: "${{ vars.DOCKER_PRIVATE_KEY_ID }}"
                  # Remove this one if you use the repository key
                  private-key-name: "releases" # Will be used for targets/releases
                  private-key: ${{ secrets.DOCKER_PRIVATE_KEY }}
                  private-key-passphrase: ${{ secrets.DOCKER_PRIVATE_KEY_PASSPHRASE }}
                  notary-auth: "${{ secrets.DOCKER_REPOSITORY_LOGIN }}:${{ secrets.DOCKER_REPOSITORY_PASSWORD }}"

Some errors you may run into

• I had filled the repository key and key Id in the ENV variables and that did throw failed to sign docker.io/botsudo/capistrano:latest: no valid signing keys for delegation roles to me.
• Then I updated the contents to use the user key contents but forgot to update the key Id and that did throw failed to sign docker.io/botsudo/capistrano:latest: The targets metadata is invalid: tuf: data has no signatures to me.
• When using the user key Id and key contents it did work fine.

Inspect trust

(be sure to check that the SHA matches, it will use the latest signed image if no signature has been done)

docker trust inspect docker.io/botsudo/action-docker-compose:latest --pretty

Example inspect output

Signatures for docker.io/botsudo/action-docker-compose:latest

SIGNED TAG          DIGEST                                                             SIGNERS
latest              8729542ca14dd459473e15719924d545809ce86a1b8e83c714e7108283841d13   sudo-bot

List of signers and their keys for docker.io/botsudo/action-docker-compose:latest

SIGNER              KEYS
sudo-bot            46afe37834b3
williamdes          51f9a39f3db4

Administrative keys for docker.io/botsudo/action-docker-compose:latest

  Repository Key:	fd6e4192798bf44c9e38bc4977d32701b5f78d3b27b1d3552e466f1f7460b2ed
  Root Key:	40222665dc8b8f91ae7a6fe5b0ec806ff3de8849374175b0334225235347525a

Check that it works

(be sure to check that the SHA matches)

docker pull docker.io/botsudo/action-docker-compose:latest --disable-content-trust=false

Example pull output

Pull (1 of 1): botsudo/action-docker-compose:latest@sha256:8729542ca14dd459473e15719924d545809ce86a1b8e83c714e7108283841d13
sha256:8729542ca14dd459473e15719924d545809ce86a1b8e83c714e7108283841d13: Pulling from botsudo/action-docker-compose
Digest: sha256:8729542ca14dd459473e15719924d545809ce86a1b8e83c714e7108283841d13
Status: Image is up to date for botsudo/action-docker-compose@sha256:8729542ca14dd459473e15719924d545809ce86a1b8e83c714e7108283841d13
Tagging botsudo/action-docker-compose@sha256:8729542ca14dd459473e15719924d545809ce86a1b8e83c714e7108283841d13 as botsudo/action-docker-compose:latest
docker.io/botsudo/action-docker-compose:latest

Some usefull commands

notary -s https://notary.docker.io delegation list docker.io/botsudo/capistrano
# Add the key to the image as delegation
docker trust signer add --key ./key-name-or-user-name.pub key-name-or-user-name docker.io/botsudo/capistrano
# Or (not sure it will work as well)
# notary -s https://notary.docker.io delegation add docker.io/botsudo/capistrano targets/releases ./key-name-or-user-name.pub --all-paths
# To remove it (if you did not use the right key)
docker trust signer remove williamdes docker.io/botsudo/capistrano
notary -s https://notary.docker.io delegation list docker.io/botsudo/capistrano
# Using --local or not may change the results of what you are trying to do
docker trust sign --local docker.io/botsudo/capistrano:latest

Sign multi platform manifests

A solution for: docker/buildx#313 and docker/cli#392

Make a manifest

Use --amend to update it.

DOCKER_CLI_EXPERIMENTAL=enabled docker manifest create docker.io/botsudo/nut-upsd:latest \
    docker.io/botsudo/nut-upsd:arm64-latest \
    docker.io/botsudo/nut-upsd:amd64-latest \
    docker.io/botsudo/nut-upsd:armv7-latest \
    docker.io/botsudo/nut-upsd:armv6-latest \
    docker.io/botsudo/nut-upsd:ppc64le-latest

Push a manifest

Purge is needed to be sure next time you create the manifest it updates the images. Ref: comment

DOCKER_CLI_EXPERIMENTAL=enabled docker manifest push docker.io/botsudo/nut-upsd:latest --purge

Sign it

My testing show you need to sign manifests with the repository key otherwise pull will not work. So do not use -r targets/sudo-bot

If you do not use a manifest you can use the same key as the one to sign the image, anyway you should not even be reading this because the image is already signed at this point.

Fetch and check the values

Set the repo to work on

export REPO="library/alpine"
export TAG="3.19.0"

Get a token (per $REPO)

AUTH_BASIC_FROM_DOCKER_CREDS_IN_BASE64="$(cat ~/.docker/config.json | jq -r '.auths."https://index.docker.io/v1/".auth')"
# This is usefull if you will do commands using the "notary" program
export NOTARY_AUTH="${AUTH_BASIC_FROM_DOCKER_CREDS_IN_BASE64}"
DT="$(curl -s "https://auth.docker.io/token?service=registry.docker.io&scope=repository:${REPO}:pull" -H "Authorization: Basic ${AUTH_BASIC_FROM_DOCKER_CREDS_IN_BASE64}" | jq -r '.token')"

Fetch the data to verify

# Recent example: multi arch manifest
$ notary -s https://notary.docker.io list docker.io/library/alpine | grep -P "^$TAG"
3.19.0             51b67269f354137895d43f3b3d810bfacd3945438e94dc5ac55fdac340352f48    1638            targets

# Second older example: a manifest with only one arch
$ notary -s https://notary.docker.io list docker.io/library/alpine | grep -P "^$TAG"
3.5                66952b313e51c3bd1987d7c4ddf5dba9bc0fb6e524eed2448fa660246b3e76ec    433             targets

# Other example
notary -s https://notary.docker.io list docker.io/botsudo/action-docker-compose
NAME      DIGEST                                                              SIZE (BYTES)    ROLE
----      ------                                                              ------------    ----
latest    beba5cb5ae49ec8185c999869d20de9ba5e6b2badebe65c1163a31906e65d413    947             targets/releases

Verify it (only for manifests: a.k.a multi arch images)

Fetch the manifest bytes count (Gives: 1638 bytes for this example)

BYTES_SIZE="$(curl -H 'Accept: application/vnd.docker.distribution.manifest.list.v2+json' https://registry-1.docker.io/v2/$REPO/manifests/$TAG -H "Authorization: Bearer $DT" -XGET | wc -c)"
echo "Manifest size in bytes: $BYTES_SIZE"

Fetch the manifest sha-256 sum (Gives: 51b67269f354137895d43f3b3d810bfacd3945438e94dc5ac55fdac340352f48 for this example)

SHA="$(curl -H 'Accept: application/vnd.docker.distribution.manifest.list.v2+json' https://registry-1.docker.io/v2/$REPO/manifests/$TAG -H "Authorization: Bearer $DT" -XGET | sha256sum | cut -d ' ' -f 1)"
echo "Manifest sha-256: $SHA"

Verify it (only for images that are NOT multiarch)

Fetch the manifest bytes count (Gives: 947 bytes for this example)

BYTES_SIZE="$(curl -H 'Accept: application/vnd.docker.distribution.manifest.v2+json' https://registry-1.docker.io/v2/$REPO/manifests/$TAG -H "Authorization: Bearer $DT" -XGET | wc -c)"
echo "Manifest size in bytes: $BYTES_SIZE"

Fetch the manifest sha-256 sum (Gives: beba5cb5ae49ec8185c999869d20de9ba5e6b2badebe65c1163a31906e65d413 for this example)

SHA="$(curl -H 'Accept: application/vnd.docker.distribution.manifest.v2+json' https://registry-1.docker.io/v2/$REPO/manifests/$TAG -H "Authorization: Bearer $DT" -XGET | sha256sum | cut -d ' ' -f 1)"
echo "Manifest sha-256: $SHA"

More notes

Source: for the skopeo command

The BYTES_SIZE bytes length can be fetched using skopeo: skopeo inspect --raw docker://docker.io/$REPO | wc -c and should match ${BYTES_SIZE}.

And the hash from skopeo inspect --raw docker://docker.io/$REPO | sha256sum should match ${SHA}

Last method to get the values: DOCKER_CLI_EXPERIMENTAL=enabled docker manifest inspect docker.io/$REPO -v | jq '.Descriptor', digest and size should be coherent with ${SHA} and ${BYTES_SIZE}.

Add the hash to notary

notary addhash -p docker.io/$REPO ${TAG_NAME} ${BYTES_SIZE} --sha256 ${MANIFEST_SHA_FROM_ABOVE_COMMAND}

You can remove it if you need: notary remove docker.io/$REPO latest -r targets/williamdes --publish (targets/williamdes can be removed depending on what key signed the value to remove).

Some usefull notes

Using manifests always did give 946 for ${BYTES_SIZE} for some reason, but not on single signed images.

A very important note: notary list docker.io/botsudo/nut-upsd can list the bad last signed value, like it was hiding another value behind it. This is why I use notary remove when I can not get the same value as the one the signing CI printed out at the end of the process.

Example: I had signed an image with my local key, and then I released a version that was signed by the CI key. When I listed using notary list the signed value by the CI was not showing. After removing my signature of the previous value it worked fine.

This website is helpfull to know more about how manifests are built.

See the results

Check the SHAs !!

docker trust inspect docker.io/botsudo/nut-upsd --pretty
notary  -s https://notary.docker.io list docker.io/botsudo/nut-upsd
docker pull docker.io/botsudo/nut-upsd:latest --disable-content-trust=false

Renewing the repository metadata

When you have one of the errors:

targets metadata is nearing expiry, you should re-sign the role metadata

• Error getting targets/releases: valid signatures did not meet threshold for targets/releases
• targets/sudo-bot metadata is nearing expiry, you should re-sign the role metadata

docker trust inspect docker.io/botsudo/nut-upsd --pretty
notary -d ~/.docker/trust/ -s https://notary.docker.io delegation list docker.io/botsudo/nut-upsd
notary -d ~/.docker/trust/ -s https://notary.docker.io status docker.io/botsudo/nut-upsd
notary -d ~/.docker/trust/ -s https://notary.docker.io witness docker.io/botsudo/nut-upsd targets/sudo-bot
notary -d ~/.docker/trust/ -s https://notary.docker.io witness docker.io/botsudo/nut-upsd targets/releases
notary -d ~/.docker/trust/ -s https://notary.docker.io status docker.io/botsudo/nut-upsd
notary -d ~/.docker/trust/ -s https://notary.docker.io publish docker.io/botsudo/nut-upsd

Exporting a key

In the "Notary format"

Ref: notaryproject/notary#1363 Ref: docker/cli#1095 (comment)

notary key export -d ~/.docker/trust --key 46afe37834b3f7f7f76f5f9cfb77d7a8a3383353581cdf74236dcf43df0260e4