Skip to content

stheine/sh1106-js

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

23 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

sh1106-js

Reference

What is this?

This library provides APIs for the SH1106 I2C/SPI compatible monochrome OLED display (Data sheet).

It can run on the Raspberry Pi (and probably other systems that have I2C interface).

This library has originated from a fork of oled-js.

Connect the OLED display

Connect the OLED display to the I2C pins:

  • GND, Pin 6
  • Vcc, 3,3V, Pin 1
  • SDA, Pin 3
  • SCL, Pin 5

Use the library

const rpio   = require('rpio');
const Oled   = require('sh1106-js');

// Rpio
rpio.init({
  gpiomem: false,
  mapping: 'physical',
});

// Oled
const oled = new Oled({rpio});

By default, the library connects the OLED with address 0x3c. This can be overwritten in new Oled({rpio, address: '0x3d'});


### Wait, how do I find out the I2C address of my OLED screen?

The following command sequence will show the I2C bus number and connected devices on your system:

```sh
$ ll /dev/i2c-*
crw-rw---- 1 root i2c 89, 1 Dec 22 12:26 /dev/i2c-1

$ i2cdetect 1
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-1.
I will probe address range 0x03-0x77.
Continue? [Y/n] y
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:          03 -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- 3c -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --

API general

color

Colors can be specified as either 0 or 'BLACK' for black, or 1 or 'WHITE' for white.

sync

Most API calls take the optional sync argument. This specifies whether to update the screen immediately with result. Default is true.

API

clearDisplay(sync = true)

Fills the buffer with 'off' pixels (0x00).

Usage:

oled.clearDisplay();

dimDisplay(contrast)

Sets the contrast on the display. The contrast can be a number from 0x00 (dark) to 0xff (bright).

Usage:

oled.dimDisplay(0xff);

invertDisplay(invert)

Inverts the pixels on the display. Black becomes white, white becomes black. This method takes one argument, a boolean. true for inverted state, false to restore normal pixel colors.

Usage:

oled.invertDisplay(true|false);

turnOffDisplay()

Turns the display off.

Usage:

oled.turnOffDisplay();

turnOnDisplay()

Turns the display on.

Usage:

oled.turnOnDisplay();

drawPixel(pixels, sync = true)

Draws one or multiple pixels at a specified position on the display. The pixels can be the definition of one pixel, or a list of pixels.

Each pixel is an array [0: x position, 1: y position, 2: color].

Usage:

// draws single white pixels total
oled.drawPixel([10, 10, 'WHITE']);

// draws 4 white pixels total
oled.drawPixel([
  [128, 1, 'WHITE'],
  [128, 32, 'WHITE'],
  [128, 16, 'WHITE'],
  [64, 16, 'WHITE']
]);

drawLine(x0, y0, x1, y0, color, sync = true)

Draws a one pixel wide line.

Arguments:

  • x0, y0 - start location of line
  • x1, y1 - end location of line
  • color - color of the line

Usage:

oled.drawLine(0, 0, 127, 63, 'WHITE');

drawDashedLine(x0, y0, x1, y0, initialColor, interval, sync = true)

Draws a one pixel wide, dashed line. The dashes change color every interval pixels.

Arguments:

  • x0, y0 - start location of line
  • x1, y1 - end location of line
  • initialColor - color of the first line dash segment
  • interval - length of each line dash segment (Setting interval=0 creates a solid line)

Usage:

oled.drawDashedLine(0, 0, 127, 63, 'WHITE', 1);
oled.drawDashedLine(127, 0, 0, 63, 'WHITE', 5);

drawRect(x, y, w, h, color, sync = true)

Draws an outlined rectangle.

Arguments:

  • x, y - top left corner of rectangle
  • w, h - width and height of rectangle (Setting width=0 and height=0 created a single pixel)
  • color - color of rectangle

Usage:

oled.drawRect(0, 0, 128, 64, 'WHITE');

drawDashedRect(x, y, w, h, initialColor, sync = true)

Draws an outlined rectangle, using dashed lines.

Arguments:

  • x, y - top left corner of rectangle
  • w, h - width and height of rectangle (Setting width=0 and height=0 created a single pixel)
  • initialColor - color of each line's first dash segment
  • interval - length of each line dash segment (Setting interval=0 creates a solid line)

fillRect(x, y, w, h, color, sync = true)

Draws a filled rectangle.

Arguments:

  • x, y - top left corner of rectangle
  • w, h - width and height of rectangle (Setting width=0 and height=0 created a single pixel)
  • color - color of rectangle

Usage:

oled.fillRect(0, 0, 127, 63, 'WHITE');

fillDashedRect(x, y, w, h, initialColor, interval, sync = true)

Draws a checkered rectangle. The color changes every interval pixels.

Arguments:

  • x, y - top left corner of rectangle
  • w, h - width and height of rectangle (Setting width=0 and height=0 created a single pixel)
  • initialColor - color of the top left segment
  • interval - size of each segment (Setting interval=0 creates a solid rectangle)

Usage:

oled.fillDashedRect(0, 0, 127, 63, 'WHITE', 5);

drawCircle(x, y, r, color, sync = true)

Draws an outlined circle.

Arguments:

  • x, y - location of circle's center
  • r - radius of circle
  • color - color of circle

Usage:

oled.drawCircle(30, 10, 5, 'WHITE');

drawBitmap(data)

Draws a bitmap using raw pixel data returned from an image parser. The image sourced must be monochrome, and indexed to only 2 colors. Resize the bitmap to your screen dimensions first. Using an image editor or ImageMagick might be required.

Optional bool as last argument specifies whether screen updates immediately with result. Default is true.

Tip: use a NodeJS image parser to get the pixel data, such as pngjs. See the test for an example.

writeString(x, y, font, string, color, sync = true)

Writes a string of text to the display.

Arguments:

  • x, y - top left location of text
  • font - font to display (see below)
  • string - string to display
  • color - color of circle

Fonts can be generated using the oled-js font foundry (note, the original oled-js font foundry by noopkat is buggy in the handling of larger fonts. Fonts generated there are incompatible).

Usage:

npm install oled-font-5x7
const font = require('oled-font-5x7');

oled.writeString(1, 1, font, 'WHITE', 'Cats and dogs');

update(startPage = 0, endPage = 7)

Sends the current buffer state to the OLED display.

This only needs to be called if sync=false option has been given in draw calls.

The OLED display is segmented in 8 pages, each 8 rows of pixels high. oled.update(0, 0) will update the top 8 rows of pixels only. By default you don't have to specify the startPage and endPage, but you might want to optimze the refresh of a certain region of the display only.

Usage:

oled.update();

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published