Skip to content
/ spdk-csi Public

CSI driver to bring SPDK to Kubernetes storage through NVMe-oF or iSCSI. Supports dynamic volume provisioning and enables Pods to use SPDK storage transparently.

License

Notifications You must be signed in to change notification settings

spdk/spdk-csi

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

SPDK CSI

About

This repo contains SPDK CSI (Container Storage Interface) plugin for Kubernetes.

SPDK CSI plugin brings SPDK to Kubernetes. It provisions SPDK logical volumes on storage node dynamically and enables Pods to access SPDK storage backend through NVMe-oF or iSCSI.

Please see SPDK CSI Design Document for detailed introduction.

Supported platforms

This plugin conforms to CSI Spec v1.7.0. It is currently developed and tested only on Kubernetes.

This plugin supports x86_64 and Arm64 architectures.

Project status

Status: Beta

Prerequisites

SPDK-CSI is currently developed and tested with Go 1.19, Docker 20.10 and Kubernetes 1.25.0 on Ubuntu 22.04.

Minimal requirement: Go 1.19+, Docker 18.03+ and Kubernetes 1.20+.

Setup

Build

  • $ make all

Build targets spdkcsi, lint, test.

  • $ make spdkcsi

Build SPDK-CSI binary _out/spdkcsi.

  • $ make lint

Lint code and scripts.

  • $ make golangci

Install golangci-lint and perform various go code static checks.

  • $ make yamllint

Lint yaml files if yamllint is installed. Requires yamllint 1.10+.

  • $ make test

Verify go modules and run unit tests. Requires SPDK target and JsonRPC HTTP proxy running on localhost. See deploy/spdk/README for details.

  • $ make e2e-test

Verify core features through Kubernetes end-to-end (e2e) test.

  • $ make image

Build SPDK-CSI docker image.

Parameters

spdkcsi executable accepts several command line parameters.

Parameter Type Description Default
--controller - enable controller service -
--node - enable node service -
--endpoint string communicate with sidecars /tmp/spdkcsi.sock
--drivername string driver name csi.spdk.io
--nodeid string node id -

Usage

Example deployment files can be found in deploy/kubernetes directory.

File Name Usage
storageclass.yaml StorageClass of provisioner "csi.spdk.io"
controller.yaml StatefulSet running CSI Controller service
node.yaml DaemonSet running CSI Node service
controller-rbac.yaml Access control for CSI Controller service
node-rbac.yaml Access control for CSI Node service
config-map.yaml SPDK storage cluster configurations
secret.yaml SPDK storage cluster access tokens
snapshotclass.yaml SnapshotClass of provisioner "csi.spdk.io"
driver.yaml CSIDriver object

NOTE:

Below example is a simplest test system running in a single host or VM. No NVMe device is required, memory based bdev is used instead. docs/multi-node.md introduces how to deploy SPDKCSI on multiple nodes with NVMe devices.


Prepare SPDK storage node

Follow deploy/spdk/README to deploy SPDK storage service on localhost.

Deploy SPDKCSI services

  1. Launch Minikube test cluster.
  $ cd scripts
  $ sudo ./minikube.sh up

  # Create kubectl shortcut (assume kubectl version 1.25.0)
  $ sudo ln -s /var/lib/minikube/binaries/v1.25.0/kubectl /usr/local/bin/kubectl

  # Wait for Kubernetes ready
  $ kubectl get pods --all-namespaces
  NAMESPACE     NAME                          READY   STATUS    RESTARTS   AGE
  kube-system   coredns-6955765f44-dlb88      1/1     Running   0          81s
  ......                                              ......
  kube-system   kube-apiserver-spdkcsi-dev    1/1     Running   0          67s
  ......                                              ......
  1. Install snapshot controller and CRD
  # The snapshot controller functions with all CSI drivers in a cluster.
  # Hence, you can skip it if your kubernetes cluster already has a snapshot controller.
  SNAPSHOT_VERSION="v6.2.2" ./scripts/install-snapshot.sh install

  # Check status
  $ kubectl get pod snapshot-controller-0
  NAME                    READY   STATUS    RESTARTS   AGE
  snapshot-controller-0   1/1     Running   0          6m14s
  1. Deploy SPDK-CSI services
  $ cd deploy/kubernetes
  $ ./deploy.sh

  # Check status
  $ kubectl get pods
  NAME                   READY   STATUS    RESTARTS   AGE
  spdkcsi-controller-0   3/3     Running   0          3m16s
  spdkcsi-node-lzvg5     2/2     Running   0          3m16s
  1. Deploy test pod
  $ cd deploy/kubernetes
  $ kubectl apply -f testpod.yaml

  # Check status
  $ kubectl get pv
  NAME                       CAPACITY   ...    STORAGECLASS   REASON   AGE
  persistentvolume/pvc-...   256Mi      ...    spdkcsi-sc              43s

  $ kubectl get pvc
  NAME                                ...   CAPACITY   ACCESS MODES   STORAGECLASS   AGE
  persistentvolumeclaim/spdkcsi-pvc   ...   256Mi      RWO            spdkcsi-sc     44s

  $ kubectl get pods
  NAME                   READY   STATUS    RESTARTS   AGE
  spdkcsi-test           1/1     Running   0          1m31s

  # Check attached spdk volume in test pod
  $ kubectl exec spdkcsi-test mount | grep spdkcsi
  /dev/disk/by-id/nvme-..._spdkcsi-sn on /spdkvol type ext4 (rw,relatime)
  1. Deploy PVC snapshot
  # Create snapshot of the bound PVC
  $ cd deploy/kubernetes
  $ kubectl apply -f snapshot.yaml

  # Get details about the snapshot
  $ kubectl get volumesnapshot spdk-snapshot
  NAME            READYTOUSE   SOURCEPVC   ... SNAPSHOTCLASS         AGE
  spdk-snapshot   false        spdkcsi-pvc ... csi-spdk-snapclass    29s

  # Get details about the volumesnapshotcontent
  kubectl get volumesnapshotcontent
  $ kubectl get volumesnapshotcontent
  NAME        ...   READYTOUSE   RESTORESIZE   DELETIONPOLICY   DRIVER        VOLUMESNAPSHOTCLASS   VOLUMESNAPSHOT   AGE
  snapcontent-...   true         268435456     Delete           csi.spdk.io   csi-spdk-snapclass    spdk-snapshot    29s

Teardown

  1. Delete PVC snapshot
  cd deploy/kubernetes
  kubectl delete -f snapshot.yaml
  1. Delete test pod
  $ cd deploy/kubernetes
  $ kubectl delete -f testpod.yaml
  1. Delete SPDK-CSI services
  $ cd deploy/kubernetes
  $ ./deploy.sh teardown
  1. Delete snapshot controller and CRD
SNAPSHOT_VERSION="v6.2.2" ./scripts/install-snapshot.sh cleanup
  1. Teardown Kubernetes test cluster
  $ cd scripts
  $ sudo ./minikube.sh clean

xPU

An Infrastructure Processing Unit (IPU), commonly referred to xPU in subsequent terminologies, is an accelerator that is attached to the PCIe bus. It communicates with a storage server through its own network interface in reality, which will help offload storage-related network traffic from local CPU cores and network interfaces.

Currently, two backends are supported for xPU: Storage Management Agent (SMA) and Open Programmable Infrastructure (OPI).

From the host's point of view, the xPU will look like a hot-pluggable local storage device. For both SMA and OPI, the xPU needs to receive remote storage information to enable it to connect to the remote target. This information is shared with the CSI node driver via CSI volume parameters that were set at the volume creation time by the CSI controller driver. The CSI node driver passes the remote storage information to xPU. For SMA, there will be a SMA gRPC server on the xPU node. For OPI, there will be a OPI-SPDK-Bridge gRPC server on the xPU node. They will be able to receive these configurations in a standard way (protobufs + gRPC).

The diagram below provides a high-level view of the architecture:

        [Kubernetes nodes]    |    [SPDK storage nodes]
                              |
        +---[K8S-Pod]----+    |    +---[xPU-Node]---+
        |--CSI-Node-Pod--|    |    |---Controller---|
        |                |    |    |                |
        | spdk-csi       |    |    |                |
        | node driver---->--------->-SMA/OPI->-spdk->---+
        +----------------+    |    |                |   |
                              |    +----------------+   |
        +---[K8S-Pod]----+    |                         |
        |-CSI-Controller-|    |    +-[Storage-Node]-+   |
        |                |    |    |-----Target-----|   |
        | spdk-csi       |    |    |                |   |
        | driver         |    |    |                |   |
        | controller----->--------->---->-spdk-<----<---+
        |                |    |    |                |
        +----------------+    |    +----------------+

Usage for xPU

The CSI-Node-Pod's configuration file for xPU is dynamically attached by Kubernetes using a config map as below.

File Name Usage
deploy/kubernetes/nodeserver-config-map.yaml SPDK xPU cluster configurations

You can configure it using the parameters mentioned below. Multiple xPU nodes are supported, and each node's configuration includes the name, targetType, and targetAddr fields. The value of "targetType" can be one of "xpu-sma-nvmftcp", "xpu-sma-virtioblk", or "xpu-sma-nvme", and "targetAddr" is the URL used to connect to the SMA server on each cluster node.

Here is an example of the deploy/kubernetes/nodeserver-config-map.yaml file:

  nodeserver-config.json: |-
    {
      "xpuList": [
        {
          "name": "xPU0",
          "targetType": "xpu-sma-nvme",
          "targetAddr":"127.0.0.1:5114"
        }
      ]
    }

Prerequisites for xPU

On a Fedora-based system, you will need grpcio-tools and protobuf installed.

Workflow for xPU

  • The instance of SPDK Json RPC is running on both the xPU node and the storage pool server.

  • For SMA, the SMA gRPC server is running on xPU node. For OPI, the OPI-SPDK-Bridge gRPC server is running on xPU node.

  • The CSI controller driver is configured with the storage pool details. On the other hand, the CSI node driver is configured with the details of the SMA/OPI gRPC server.

  • When the CSI controller driver receives a new volume request from the Kubernetes volume plugin, it initiates a JSON RPC request to the SPDK storage node. This request triggers the creation and export of an NVMe volume on the SPDK storage node. The volume connection details are then stored in the CSI volume parameters for further reference.

  • Upon receiving a stage volume request along with the volume parameters, the CSI node driver comes into action. The CSI node plugin initiates the appropriate SMA/OPI gRPC calls to the server running on the xPU node.

  • Subsequently, the CSI node driver establishes a connection to the remote NVMe device using the volume parameters obtained earlier. With the connection established, the CSI node driver proceeds to create a local volume with the appropriate volume type. Furthermore, it attaches the volume to the remote NVMe device, effectively exposing it as a local device on the host for further usage.

Prepare SPDK xPU node

Follow deploy/spdk/README to deploy SPDK SMA service on localhost.

For the rest steps, you can follow the same steps in "Prepare SPDK storage node", "Deploy SPDKCSI services", and "Teardown" above to prepare the SPDK storage node, deploy SPDKCSI driver, and tear down everything.

Communication and Contribution

Please join SPDK community for communication and contribution.

Project progress is tracked in Trello board.

About

CSI driver to bring SPDK to Kubernetes storage through NVMe-oF or iSCSI. Supports dynamic volume provisioning and enables Pods to use SPDK storage transparently.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published