Banana Jack and BNC Adapters for RIGOL DL3000 Electronic Loads

Overview

This project is about banana jack and BNC adapters for RIGOL's DL3000 series electronic loads. There are already adapters for narrower binding posts (like BK Precision, ...) but I did not find any for the 39 mm pitch of the RIGOL DL3000 series.

These adapters are meant for conveniently feeding a few amperes - not for high current applications.

Variants and Bills of Material

BNC Adapter

The BNC adapter has a pretty standard footprint. So you should be able to find a suitable replacement from your preferred distributor. Information on replacement parts welcome.

• 1 PCB
  • KiCad design files form this repository
  • Gerber and drill files
  • Or just order it from OSH Park
• 1 BNC connector

Banana Jack Adapters

There are two board variants for sourcing the connectors from different distributors.

PB4 Banana Jack Adapter

• 1 PCB
  • KiCad design files from this repository
  • Gerber an drill files
  • Or just order it from OSH Park
• 1 connector Hirschmann Test and Measurement PB4 red
• 1 connector Hirschmann Test and Measurement PB4 black

73099 Banana Jack Adapter

• 1 PCB
  • KiCad design files form this repository
  • Gerber and drill files
  • Or just order it from OSH Park
• 1 connector Pomona 73099 red
• 1 connector Pomona 73099 black