Skip to content

pjeby/gulpsmith

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

42 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Gulp + Metalsmith = gulpsmith

gulpsmith lets you use Gulp plugins (or vinyl pipelines) with Metalsmith, and use Metalsmith plugins as part of a Gulp or vinyl pipeline. This can be helpful if you:

  • Don't want Metalsmith to slurp up an entire directory tree of files,
  • Want to upload your Metalsmith build to Amazon S3 or send it someplace via SFTP without first generating files locally and then running a separate uploading process,
  • Want to pre- or post-process your Metalsmith build with Gulp plugins, or
  • Already run your build process with one tool or the other and don't want to switch, but need both kinds of plugins.

gulpsmith().use(metal_plugin1).use(metal_plugin2)... wraps one or more Metalsmith plugins for use in Gulp, whereas gulpsmith.pipe(stream1).pipe(stream2)... turns a series of Gulp plugins (or vinyl streaming operations) into a plugin that can be passed to Metalsmith's .use() method.

(In addition,gulpsmith.pipe() is Highland-friendly and lets you pass in Highland stream transforms and functions as well as Gulp plugins.)

While a perfect translation between Gulp and Metalsmith is impossible, gulpsmith does its best to be lossless and corruption-free in both directions. When "corruption-free" and "lossless" are in conflict, however, gulpsmith prioritizes being "corruption-free". That is, it chooses to drop conflicting properties during translation, rather than create problems downstream. (See File Conversions and Compatibility, below, for more details.)

Important: starting with gulpsmith 0.6.0, gulp files are created using vinyl 2.1, which means that the list of dropped properties has changed, and the list in this document may not be accurate for vinyl versions > 2.1. You may need to stay on gulpsmith 0.5.5 if your project uses any of the new reserved property names (like history) as metalsmith properties. But if your project uses gulp 4, upgrading to gulpsmith 0.6.0 is required.

Table of Contents

Using Metalsmith in a Gulp Pipeline

To use Metalsmith in a Gulp pipeline, call gulpsmith() with an optional directory name (default is process.cwd()) which will be used to create a Metalsmith instance. The return value is a stream that can be used in a Gulp .pipe() chain, but which also has .use() and .metadata() methods that can be used to configure the Metalsmith instance.

Instead of reading from a source directory and writing to a destination directory, the wrapped Metalsmith instance obtains all its files in-memory from the Gulp pipeline, and will send all its files in-memory to the next stage of the pipeline.

(Because Metalsmith processes files in a group, note that your overall Gulp pipeline's output will pause until all the files from previous stages have been processed by Metalsmith. All of Metalsmith's output files will then be streamed to the next stage of the pipeline, all at once.)

Example:

gulpsmith = require('gulpsmith');

gulp.src("./src/**/*")
.pipe(some_gulp_plugin(some_options))
.pipe(
    gulpsmith()     // defaults to process.cwd() if no dir supplied

    // You can initialize the metalsmith instance with metadata
    .metadata({site_name: "My Site"})

    // and .use() as many Metalsmith plugins as you like 
    .use(markdown())
    .use(permalinks('posts/:title'))
)
.pipe(another_gulp_plugin(more_options))
.pipe(gulp.dest("./build")

Front Matter and File Properties

Unlike Metalsmith, Gulp doesn't read YAML front matter by default. So if you want the front matter to be available in Metalsmith, you will need to use the gulp-front-matter plugin, and insert something like this to promote the .frontMatter properties before piping to gulpsmith():

gulp_front_matter = require('gulp-front-matter');
assign = require('lodash.assign');

gulp.src("./src/**/*")

.pipe(gulp_front_matter()).on("data", function(file) {
    assign(file, file.frontMatter); 
    delete file.frontMatter;
})

.pipe(gulpsmith()
    .use(...)
    .use(...)
)

This will extract the front matter and promote it to properties on the file, where Metalsmith expects to find it. (Alternately, you could use gulp-append-data and the data property instead, to load data from adjacent .json files in place of YAML front matter!)

Of course, there are other Gulp plugins that add useful properties to files, and those properties will of course be available to your Metalsmith plugins as well.

(For example, if you pass some files through the gulp-jshint plugin before they go to Metalsmith, the Metalsmith plugins will see a jshint property on the files, with sub-properties for success, errorCount, etc. If you use gulp-sourcemaps, your files will have a sourceMap property, and so on.)

Using a Gulp Pipeline as a Metalsmith Plugin

To use Gulp plugins or other streams as a Metalsmith plugin, simply begin the pipeline with gulpsmith.pipe():

gulpsmith = require('gulpsmith')

Metalsmith(__dirname)
.use(drafts())
.use(markdown())
.use(gulpsmith
    .pipe(some_gulp_plugin(some_options))
    .pipe(another_gulp_plugin(more_options))
    .pipe(as_many_as(you_like))
)
.use(more_metalsmith_plugins())
.build()

From the point of view of the Gulp plugins, the file objects will have a cwd property equal to the Metalsmith base directory, and a base property equal to the Metalsmith source directory. They will have a dummy stat property containing only the Metalsmith file's mode, along with any other data properties that were attached to the file by Metalsmith or its plugins (e.g. from the files' YAML front matter).

In this usage pattern, there is no gulp.src() or gulp.dest(), because Metalsmith handles the reading and writing of files. If the Gulp pipeline drops or renames any of the input files, they will be dropped or renamed in the Metalsmith pipeline as well.

(If you want to, though, you can include a gulp.dest(), or any other Gulp output plugin in your pipeline. Just make sure that you also do something to drop the written files from the resulting stream (e.g. using gulp-filter), unless you want Metalsmith to also output the files itself. Doing both can be useful if you use a Gulp plugin to upload files, but you also want Metalsmith to output a local copy.)

Enhanced Features of gulpsmith.pipe()

Under the hood, gulpsmith.pipe() is a thin wrapper around Highland's _.pipeline() function. This means that:

  • You can pass multiple plugins in (e.g. gulpsmith.pipe(plugin1, plugin2,...)
  • You can pass in Highland transforms as plugins (e.g. using gulpsmith.pipe(_.where({published:true})) to pass through only posts with a true .published property.)
  • You can pass in functions that accept a Highland stream and return a modified version of it, e.g.:
gulpsmith.pipe( 
    function(stream) { 
        return stream.map(something).filter(otherthing); 
    }
)

In addition, Highland's error forwarding makes sure that errors in anything passed to gulpsmith.pipe() are passed on to Metalsmith. (More on this in the next section.)

Advanced Pipelines and Error Handling

If the pipeline you're using in Metalsmith is built strictly via a series of of gulpsmith.pipe().pipe()... calls, and you don't save a Metalsmith instance to repeatedly call .build() or .run() on, you probably don't need to read the rest of this section.

If you need to do something more complex, however, you need to be aware of three things:

  1. Unlike most Metalsmith plugins, Gulp plugins/pipelines are stateful and cannot be used for more than one build run.

  2. If you pass a precomposed pipeline of plugins to gulpsmith.pipe(), it may not report errors properly, thereby hanging or crashing your build if an error occurs.

  3. Unlike the normal stream .pipe() method, gulpsmith.pipe() does not return the piped-to stream: it returns a Metalsmith plugin that just happens to also have a .pipe() method for further chaining!

The following three sub-sections will tell you what you need to know to apply or work around these issues.

Reusing Pipelines

If you want to reuse the same Metalsmith instance over and over with the same Gulp pipeline embedded as a plugin, you must recreate the pipeline on each run. (Sorry, that's just how Node streams work!)

It's easy to do that though, if you need to. Just write a short in-line plugin that re-creates the pipeline each time, like this:

Metalsmith(__dirname)
.use(drafts())
.use(markdown())
.use(function() {   // inline Metalsmith plugin...
    return gulpsmith
        .pipe(some_gulp_plugin(some_options))
        .pipe(another_gulp_plugin(more_options))
        .pipe(as_many_as(you_like))
    .apply(this, arguments)  // that calls the gulpsmith-created plugin
})
.use(more_metalsmith_plugins())

Make sure, however, that all of the Gulp plugins are created within the function passed to .use(), or your pipeline may mysteriously drop files on the second and subsequent .run() or .build().

Using Pre-assembled Pipelines

By default, the standard .pipe() method of Node stream objects does not chain errors forward to the destination stream. This means that if you build a pipeline with the normal .pipe() method of Gulp plugins, you're going to run into problems if one of your source streams emits errors.

Specifically, your build process can hang, because as far as Gulp or Metalsmith are concerned, the build process is still running! (If you've ever had a Gulp build mysteriously hang on you, you now know the likely reason why.)

Fortunately for you, if you use gulpsmith.pipe() to build up your pipeline, it will automatically add an error handler to each stream, so that no matter where in the pipeline an error occurs, Metalsmith will be notified, and the build will end with an error instead of hanging indefinitely or crashing the process.

However, if for some reason you must pass a pre-assembled pipeline into gulpsmith.pipe(), you should probably add error handlers to any part of the pipeline that can generate errors. These handlers should forward the error to the last stream in the pipeline, so that it can be forwarded to Metalsmith by gulpsmith.pipe().

(Alternately, you could use Highland's _.pipeline() to construct your Gulp pipelines -- which can be a good idea, even when you're not using them in Metalsmith!)

Stream Operations Other Than .pipe()

Because gulpsmith.pipe() returns a Metalsmith plugin rather than a stream, you cannot perform stream operations (like adding event handlers) on the result of the call. Instead, you must perform those operations on the argument of the call.

For example, instead of doing this:

Metalsmith(__dirname)
.use(gulpsmith
    .pipe(some_gulp_plugin(some_options))
    .on("data", function(file){...})  // WRONG: this is not a stream!
    .pipe(another_gulp_plugin(more_options))
)

You would need to do this instead:

Metalsmith(__dirname)
.use(gulpsmith
    .pipe(
        some_gulp_plugin(some_options)
        .on("data", function(file){...})  // RIGHT
    )        
    .pipe(another_gulp_plugin(more_options))
)

In other words, you will need to perform any stream-specific operations directly on the component streams, rather than relying on the output of .pipe() to return the stream you passed in.

(The same principle applies if you're saving a stream in a variable to use later: save the value being passed in to .pipe(), instead of saving the result of calling .pipe().)

File Conversions and Compatibility

Regardless of whether you are using Gulp plugins in Metalsmith or vice versa, gulpsmith() must convert the file objects involved twice: once in each direction at either end of the plugin list. For basic usage, you will probably not notice anything unusual, since Gulp plugins rarely do anything with file properties other than the path and contents, and Metalsmith plugins don't usually expect to do anything with vinyl file properties.

In particular, if you only use Gulp to pre- and post-process files for Metalsmith (whether it's by using Gulp plugins in Metalsmith or vice-versa), you will probably not encounter any problems with the conversions. It's only if you use Gulp plugins in the middle of your Metalsmith plugin list that you may run into issues with reserved properties.

Reserved Properties

Both Gulp and Metalsmith have certain file properties that have special meaning. When translating between systems, gulpsmith always either deletes or overwrites them, so that they have correct values for the system where they have special meaning, and do not exist in the system where they don't.

If you put data in any of the property names below from a system other than the one that reserves it, you will lose that data when the file is converted for use by the other system.

That's because, when translating between systems, gulpsmith first deletes all of these properties, then adds back the ones that are needed for the target system, based on reserved information from the source system.

So, if you have a Metalsmith file with a .base or .path (for example), those properties will not be used to create the Gulp .base or .path. They will simply be deleted, and replaced with suitable values calculated from Metalsmith's internal path information.

This approach avoids collision with any properties in your Metalsmith project that just happened to be named .base, .path, .relative, etc., that could mess up Gulp plugins expecting these values to have their reserved meanings. (Similarly, when converting from Gulp to Metalsmith, these path properties will again be deleted, so that they don't confuse any Metalsmith plugins that are expecting, say, .path to be a URL path.)

In short, gulpsmith prefers to possibly lose data (but do so every single time), rather than to pass through properties that might later corrupt a build when you begin using those properties for something else.

(After all, if the properties are always removed, there is no way for you to have a build that seems to work most of the time, until suddenly it doesn't any more!)

Gulp Reserved Property Names

Bold names are new in gulpsmith 0.6.0, due to use of vinyl 2.x for compatibility with Gulp 4.

Property Contents
.base the directory from which the relative path is calculated
.basename the filename without its path
.cwd the original working directory when the file was created
.dirname the directory portion of path
.extname the file extension
.history history of .path values
.path the file's absolute filesystem path
.relative the file's .path, relative to its .base
.stat the file's filesystem stat
.stem the file's .basename, minus its extension
.symlink the file's symlink target, if applicable
._contents private property for the file's contents
.isBuffer method of vinyl file objects
.isCustomProp method of vinyl file objects
.isNull method of vinyl file objects
.isStream method of vinyl file objects
.isSymbolic method of vinyl file objects
.isVinyl method of vinyl file objects
.isDirectory method of vinyl file objects
.inspect method of vinyl file objects
.clone method of vinyl file objects

Metalsmith Reserved Property Names

Property Contents
.mode An octal string specifying the file permissions
.stats the file's filesystem stat (NEW in Metalsmith 0.10)

Gulp Directories and Metalsmith

Gulp is usually described as operating on streams of file objects. But those file objects can also be directories: i.e., file objects whose .isDirectory() method returns true. If you use a sufficiently broad wildcard in gulp.src(), (e.g. **/*) it will scoop up directories, as well as the files alongside them.

Normally, you wouldn't notice this is happening, because most Gulp plugins (including gulp.dest()!) basically ignore the directories and just process the files.

Metalsmith also operates only on files, so Gulpsmith filters the directories out before they can reach Metalsmith, and it does not restore them afterward.

If you happen to need a rare Gulp plugin that does do something with directories, you should probably put it before Gulpsmith in your pipeline, or use gulp-filter and its .restore option to sift the directories out ahead of Gulpsmith and put them back in afterwards.

About

Use gulp plugins in Metalsmith, or Metalsmith plugins in gulp

Resources

Stars

Watchers

Forks

Packages

No packages published