core/muxing: Generalise StreamMuxer::poll_address_change to poll (#…

…2797)

This is to allow general-purpose background work to be performed
by implementations.

core/CHANGELOG.md

@@ -1,16 +1,18 @@
 # 0.35.0 [unreleased]
 
-- Remove `StreamMuxer::poll_event` in favor of individual functions: `poll_inbound`, `poll_outbound`
-  and `poll_address_change`. Consequently, `StreamMuxerEvent` is also removed. See [PR 2724].
 - Drop `Unpin` requirement from `SubstreamBox`. See [PR 2762] and [PR 2776].
 - Drop `Sync` requirement on `StreamMuxer` for constructing `StreamMuxerBox`. See [PR 2775].
 - Use `Pin<&mut Self>` as the receiver type for all `StreamMuxer` poll functions. See [PR 2765].
+- Change `StreamMuxer` interface to be entirely poll-based. All functions on `StreamMuxer` now
+  require a `Context` and return `Poll`. This gives callers fine-grained control over what they
+  would like to make progress on. See [PR 2724] and [PR 2797].
 
 [PR 2724]: https://github.com/libp2p/rust-libp2p/pull/2724
 [PR 2762]: https://github.com/libp2p/rust-libp2p/pull/2762
 [PR 2775]: https://github.com/libp2p/rust-libp2p/pull/2775
 [PR 2776]: https://github.com/libp2p/rust-libp2p/pull/2776
 [PR 2765]: https://github.com/libp2p/rust-libp2p/pull/2765
+[PR 2797]: https://github.com/libp2p/rust-libp2p/pull/2797
 
 # 0.34.0
 

core/src/either.rs

@@ -18,6 +18,7 @@
 // FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 // DEALINGS IN THE SOFTWARE.
 
+use crate::muxing::StreamMuxerEvent;
 use crate::{
     muxing::StreamMuxer,
     transport::{ListenerId, Transport, TransportError, TransportEvent},
@@ -236,22 +237,20 @@ where
         }
     }
 
-    fn poll_address_change(
-        self: Pin<&mut Self>,
-        cx: &mut Context<'_>,
-    ) -> Poll<Result<Multiaddr, Self::Error>> {
+    fn poll_close(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<Result<(), Self::Error>> {
         match self.project() {
-            EitherOutputProj::First(inner) => inner.poll_address_change(cx).map_err(EitherError::A),
-            EitherOutputProj::Second(inner) => {
-                inner.poll_address_change(cx).map_err(EitherError::B)
-            }
+            EitherOutputProj::First(inner) => inner.poll_close(cx).map_err(EitherError::A),
+            EitherOutputProj::Second(inner) => inner.poll_close(cx).map_err(EitherError::B),
         }
     }
 
-    fn poll_close(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<Result<(), Self::Error>> {
+    fn poll(
+        self: Pin<&mut Self>,
+        cx: &mut Context<'_>,
+    ) -> Poll<Result<StreamMuxerEvent, Self::Error>> {
         match self.project() {
-            EitherOutputProj::First(inner) => inner.poll_close(cx).map_err(EitherError::A),
-            EitherOutputProj::Second(inner) => inner.poll_close(cx).map_err(EitherError::B),
+            EitherOutputProj::First(inner) => inner.poll(cx).map_err(EitherError::A),
+            EitherOutputProj::Second(inner) => inner.poll(cx).map_err(EitherError::B),
         }
     }
 }

core/src/muxing.rs

@@ -75,6 +75,10 @@ pub trait StreamMuxer {
     type Error: std::error::Error;
 
     /// Poll for new inbound substreams.
+    ///
+    /// This function should be called whenever callers are ready to accept more inbound streams. In
+    /// other words, callers may exercise back-pressure on incoming streams by not calling this
+    /// function if a certain limit is hit.
     fn poll_inbound(
         self: Pin<&mut Self>,
         cx: &mut Context<'_>,
@@ -86,25 +90,33 @@ pub trait StreamMuxer {
         cx: &mut Context<'_>,
     ) -> Poll<Result<Self::Substream, Self::Error>>;
 
-    /// Poll for an address change of the underlying connection.
+    /// Poll to close this [`StreamMuxer`].
     ///
-    /// Not all implementations may support this feature.
-    fn poll_address_change(
-        self: Pin<&mut Self>,
-        cx: &mut Context<'_>,
-    ) -> Poll<Result<Multiaddr, Self::Error>>;
-
-    /// Closes this `StreamMuxer`.
-    ///
-    /// After this has returned `Poll::Ready(Ok(()))`, the muxer has become useless. All
-    /// subsequent reads must return either `EOF` or an error. All subsequent writes, shutdowns,
-    /// or polls must generate an error or be ignored.
+    /// After this has returned `Poll::Ready(Ok(()))`, the muxer has become useless and may be safely
+    /// dropped.
     ///
     /// > **Note**: You are encouraged to call this method and wait for it to return `Ready`, so
     /// >           that the remote is properly informed of the shutdown. However, apart from
     /// >           properly informing the remote, there is no difference between this and
     /// >           immediately dropping the muxer.
     fn poll_close(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<Result<(), Self::Error>>;
+
+    /// Poll to allow the underlying connection to make progress.
+    ///
+    /// In contrast to all other `poll`-functions on [`StreamMuxer`], this function MUST be called
+    /// unconditionally. Because it will be called regardless, this function can be used by
+    /// implementations to return events about the underlying connection that the caller MUST deal
+    /// with.
+    fn poll(
+        self: Pin<&mut Self>,
+        cx: &mut Context<'_>,
+    ) -> Poll<Result<StreamMuxerEvent, Self::Error>>;
+}
+
+/// An event produced by a [`StreamMuxer`].
+pub enum StreamMuxerEvent {
+    /// The address of the remote has changed.
+    AddressChange(Multiaddr),
 }
 
 /// Extension trait for [`StreamMuxer`].
@@ -131,15 +143,12 @@ pub trait StreamMuxerExt: StreamMuxer + Sized {
         Pin::new(self).poll_outbound(cx)
     }
 
-    /// Convenience function for calling [`StreamMuxer::poll_address_change`] for [`StreamMuxer`]s that are `Unpin`.
-    fn poll_address_change_unpin(
-        &mut self,
-        cx: &mut Context<'_>,
-    ) -> Poll<Result<Multiaddr, Self::Error>>
+    /// Convenience function for calling [`StreamMuxer::poll`] for [`StreamMuxer`]s that are `Unpin`.
+    fn poll_unpin(&mut self, cx: &mut Context<'_>) -> Poll<Result<StreamMuxerEvent, Self::Error>>
     where
         Self: Unpin,
     {
-        Pin::new(self).poll_address_change(cx)
+        Pin::new(self).poll(cx)
     }
 
     /// Convenience function for calling [`StreamMuxer::poll_close`] for [`StreamMuxer`]s that are `Unpin`.

core/src/muxing/boxed.rs

@@ -1,6 +1,5 @@
-use crate::StreamMuxer;
+use crate::muxing::{StreamMuxer, StreamMuxerEvent};
 use futures::{AsyncRead, AsyncWrite};
-use multiaddr::Multiaddr;
 use pin_project::pin_project;
 use std::error::Error;
 use std::fmt;
@@ -38,11 +37,6 @@ where
     type Substream = SubstreamBox;
     type Error = io::Error;
 
-    #[inline]
-    fn poll_close(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<Result<(), Self::Error>> {
-        self.project().inner.poll_close(cx).map_err(into_io_error)
-    }
-
     fn poll_inbound(
         self: Pin<&mut Self>,
         cx: &mut Context<'_>,
@@ -65,14 +59,16 @@ where
             .map_err(into_io_error)
     }
 
-    fn poll_address_change(
+    #[inline]
+    fn poll_close(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<Result<(), Self::Error>> {
+        self.project().inner.poll_close(cx).map_err(into_io_error)
+    }
+
+    fn poll(
         self: Pin<&mut Self>,
         cx: &mut Context<'_>,
-    ) -> Poll<Result<Multiaddr, Self::Error>> {
-        self.project()
-            .inner
-            .poll_address_change(cx)
-            .map_err(into_io_error)
+    ) -> Poll<Result<StreamMuxerEvent, Self::Error>> {
+        self.project().inner.poll(cx).map_err(into_io_error)
     }
 }
 
@@ -109,11 +105,6 @@ impl StreamMuxer for StreamMuxerBox {
     type Substream = SubstreamBox;
     type Error = io::Error;
 
-    #[inline]
-    fn poll_close(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<Result<(), Self::Error>> {
-        self.project().poll_close(cx)
-    }
-
     fn poll_inbound(
         self: Pin<&mut Self>,
         cx: &mut Context<'_>,
@@ -128,11 +119,16 @@ impl StreamMuxer for StreamMuxerBox {
         self.project().poll_outbound(cx)
     }
 
-    fn poll_address_change(
+    #[inline]
+    fn poll_close(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<Result<(), Self::Error>> {
+        self.project().poll_close(cx)
+    }
+
+    fn poll(
         self: Pin<&mut Self>,
         cx: &mut Context<'_>,
-    ) -> Poll<Result<Multiaddr, Self::Error>> {
-        self.project().poll_address_change(cx)
+    ) -> Poll<Result<StreamMuxerEvent, Self::Error>> {
+        self.project().poll(cx)
     }
 }
 

core/src/muxing/singleton.rs

@@ -18,10 +18,10 @@
 // FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 // DEALINGS IN THE SOFTWARE.
 
-use crate::{connection::Endpoint, muxing::StreamMuxer};
+use crate::connection::Endpoint;
+use crate::muxing::{StreamMuxer, StreamMuxerEvent};
 
 use futures::prelude::*;
-use multiaddr::Multiaddr;
 use std::cell::Cell;
 use std::pin::Pin;
 use std::{io, task::Context, task::Poll};
@@ -88,14 +88,14 @@ where
         }
     }
 
-    fn poll_address_change(
+    fn poll_close(self: Pin<&mut Self>, _cx: &mut Context<'_>) -> Poll<Result<(), io::Error>> {
+        Poll::Ready(Ok(()))
+    }
+
+    fn poll(
         self: Pin<&mut Self>,
         _: &mut Context<'_>,
-    ) -> Poll<Result<Multiaddr, Self::Error>> {
+    ) -> Poll<Result<StreamMuxerEvent, Self::Error>> {
         Poll::Pending
     }
-
-    fn poll_close(self: Pin<&mut Self>, _cx: &mut Context<'_>) -> Poll<Result<(), io::Error>> {
-        Poll::Ready(Ok(()))
-    }
 }

muxers/mplex/src/lib.rs

@@ -27,10 +27,8 @@ pub use config::{MaxBufferBehaviour, MplexConfig};
 use bytes::Bytes;
 use codec::LocalStreamId;
 use futures::{future, prelude::*, ready};
-use libp2p_core::{
-    upgrade::{InboundUpgrade, OutboundUpgrade, UpgradeInfo},
-    Multiaddr, StreamMuxer,
-};
+use libp2p_core::muxing::{StreamMuxer, StreamMuxerEvent};
+use libp2p_core::upgrade::{InboundUpgrade, OutboundUpgrade, UpgradeInfo};
 use parking_lot::Mutex;
 use std::{cmp, iter, pin::Pin, sync::Arc, task::Context, task::Poll};
 
@@ -105,10 +103,10 @@ where
             .map_ok(|stream_id| Substream::new(stream_id, self.io.clone()))
     }
 
-    fn poll_address_change(
+    fn poll(
         self: Pin<&mut Self>,
         _: &mut Context<'_>,
-    ) -> Poll<Result<Multiaddr, Self::Error>> {
+    ) -> Poll<Result<StreamMuxerEvent, Self::Error>> {
         Poll::Pending
     }
 

muxers/yamux/src/lib.rs

@@ -26,9 +26,8 @@ use futures::{
     prelude::*,
     stream::{BoxStream, LocalBoxStream},
 };
-use libp2p_core::muxing::StreamMuxer;
+use libp2p_core::muxing::{StreamMuxer, StreamMuxerEvent};
 use libp2p_core::upgrade::{InboundUpgrade, OutboundUpgrade, UpgradeInfo};
-use libp2p_core::Multiaddr;
 use std::{
     fmt, io, iter, mem,
     pin::Pin,
@@ -124,10 +123,10 @@ where
             .map_err(YamuxError)
     }
 
-    fn poll_address_change(
+    fn poll(
         self: Pin<&mut Self>,
         _: &mut Context<'_>,
-    ) -> Poll<Result<Multiaddr, Self::Error>> {
+    ) -> Poll<Result<StreamMuxerEvent, Self::Error>> {
         Poll::Pending
     }
 

swarm/src/connection.rs

@@ -35,7 +35,7 @@ use crate::IntoConnectionHandler;
 use handler_wrapper::HandlerWrapper;
 use libp2p_core::connection::ConnectedPoint;
 use libp2p_core::multiaddr::Multiaddr;
-use libp2p_core::muxing::{StreamMuxerBox, StreamMuxerExt};
+use libp2p_core::muxing::{StreamMuxerBox, StreamMuxerEvent, StreamMuxerExt};
 use libp2p_core::upgrade;
 use libp2p_core::PeerId;
 use std::collections::VecDeque;
@@ -153,27 +153,36 @@ where
                 }
             }
 
-            if !self.open_info.is_empty() {
-                if let Poll::Ready(substream) = self.muxing.poll_outbound_unpin(cx)? {
-                    let user_data = self
-                        .open_info
-                        .pop_front()
-                        .expect("`open_info` is not empty");
-                    let endpoint = SubstreamEndpoint::Dialer(user_data);
-                    self.handler.inject_substream(substream, endpoint);
-                    continue; // Go back to the top, handler can potentially make progress again.
+            match self.muxing.poll_unpin(cx)? {
+                Poll::Pending => {}
+                Poll::Ready(StreamMuxerEvent::AddressChange(address)) => {
+                    self.handler.inject_address_change(&address);
+                    return Poll::Ready(Ok(Event::AddressChange(address)));
                 }
             }
 
-            if let Poll::Ready(substream) = self.muxing.poll_inbound_unpin(cx)? {
-                self.handler
-                    .inject_substream(substream, SubstreamEndpoint::Listener);
-                continue; // Go back to the top, handler can potentially make progress again.
+            if !self.open_info.is_empty() {
+                match self.muxing.poll_outbound_unpin(cx)? {
+                    Poll::Pending => {}
+                    Poll::Ready(substream) => {
+                        let user_data = self
+                            .open_info
+                            .pop_front()
+                            .expect("`open_info` is not empty");
+                        let endpoint = SubstreamEndpoint::Dialer(user_data);
+                        self.handler.inject_substream(substream, endpoint);
+                        continue; // Go back to the top, handler can potentially make progress again.
+                    }
+                }
             }
 
-            if let Poll::Ready(address) = self.muxing.poll_address_change_unpin(cx)? {
-                self.handler.inject_address_change(&address);
-                return Poll::Ready(Ok(Event::AddressChange(address)));
+            match self.muxing.poll_inbound_unpin(cx)? {
+                Poll::Pending => {}
+                Poll::Ready(substream) => {
+                    self.handler
+                        .inject_substream(substream, SubstreamEndpoint::Listener);
+                    continue; // Go back to the top, handler can potentially make progress again.
+                }
             }
 
             return Poll::Pending; // Nothing can make progress, return `Pending`.