Release automation

[KnVerey]

Releasing Kustomize is somewhat complicated because of the multiple modules involved. A fair amount of tooling exists in the repo to make this easier today. However, those tools are only usable by a small number of people in practice, and the process overall is still quite time-consuming.

Goals:

• The process should be as automated as possible. As much as possible should happen in remote tasks rather than on the maintainer's laptop.
• Any Approver should be able to a release; the process should not require repo admin rights
• Existing SIG Release tooling should be re-used to the extent possible
• Remove our reliance on an outdated GoReleaser version: Kustomize stuck on outdated goreleaser version #4542
• automate the kustomize-in-kubectl update [it is now scripted; does not necessarily happen immediately after release]
• Improve release note generation to reference PRs appropriately Converge local and cloud gorelease scripts, improve release notes #4537

/triage accepted
/area release

[k8s-triage-robot]

The Kubernetes project currently lacks enough contributors to adequately respond to all issues and PRs.

This bot triages issues and PRs according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Mark this issue or PR as fresh with /remove-lifecycle stale
• Mark this issue or PR as rotten with /lifecycle rotten
• Close this issue or PR with /close
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/lifecycle stale

[KnVerey]

/remove-lifecycle stale

[k8s-triage-robot]

The Kubernetes project currently lacks enough contributors to adequately respond to all issues and PRs.

This bot triages issues and PRs according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Mark this issue or PR as fresh with /remove-lifecycle stale
• Mark this issue or PR as rotten with /lifecycle rotten
• Close this issue or PR with /close
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/lifecycle stale

[k8s-triage-robot]

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues and PRs.

This bot triages issues and PRs according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Mark this issue or PR as fresh with /remove-lifecycle rotten
• Close this issue or PR with /close
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/lifecycle rotten

[k8s-triage-robot]

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues and PRs.

This bot triages issues and PRs according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Reopen this issue or PR with /reopen
• Mark this issue or PR as fresh with /remove-lifecycle rotten
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/close

[k8s-ci-robot]

@k8s-triage-robot: Closing this issue.

In response to this:

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues and PRs.

This bot triages issues and PRs according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Reopen this issue or PR with /reopen
• Mark this issue or PR as fresh with /remove-lifecycle rotten
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/close

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes/test-infra repository.

[k8s-triage-robot]

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues and PRs.

This bot triages issues and PRs according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Reopen this issue or PR with /reopen
• Mark this issue or PR as fresh with /remove-lifecycle rotten
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/close

[k8s-ci-robot]

@k8s-triage-robot: Closing this issue.

In response to this:

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues and PRs.

This bot triages issues and PRs according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Reopen this issue or PR with /reopen
• Mark this issue or PR as fresh with /remove-lifecycle rotten
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/close

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes/test-infra repository.

[k8s-triage-robot]

The Kubernetes project currently lacks enough contributors to adequately respond to all issues and PRs.

This bot triages issues and PRs according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Mark this issue or PR as fresh with /remove-lifecycle stale
• Mark this issue or PR as rotten with /lifecycle rotten
• Close this issue or PR with /close
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/lifecycle stale

[KnVerey]

/lifecycle frozen

[natasha41575]

The current release process is documented here: https://github.com/kubernetes-sigs/kustomize/tree/master/releasing

The first step for this issue would be to read through the current release process and write up a proposal for how we can automate it.

[antoooks]

/assign

[antoooks]

To do:

• Analyse current release pipeline and gather references
• Decide the scope of the project (how far we automate?)
• Break down release pipeline into stages
• Publish RFP & review
• Execute implementation
• Test & review implementation
• Feedback gathering
• Discover bugs & improvements

[antoooks]

Hi @natasha41575, I have created a brainstorming board on Miro since I don't think GH can cover interactions I wanted. Would you be comfortable to join and give some comments on the board?

Let me know if there's anyone I should invite 😃

[antoooks]

Splitting task into 2:

1. Developing dependency pinning and dependency update scripts (Automate dependency pinning and updating script for Kustomize #5404)
2. Develop release process automation (Add release automation for api, kyaml, cmd/config, and kustomize CLI #5449)