Skip to content
This repository has been archived by the owner on Jun 4, 2021. It is now read-only.

Releases: knative/eventing-contrib

Knative Eventing Contrib release v0.18.8

15 Dec 10:28
2d44c08
Compare
Choose a tag to compare

Action Required

  • Change storage versions of flows.- resources from v1beta1 to v1:
    • “channels.messaging.knative.dev” \
    • “inmemorychannels.messaging.knative.dev” \
    • You must run pre-install job prior to upgrading to get messaging.- resources to v1 API. ([#3925]. (knative/eventing#3925), @aliok)
  • Change storage versions of flows.- resources from v1beta1 to v1:
    • “parallels.flows.knative.dev”
    • “sequences.flows.knative.dev”
    • You must run pre-install job prior to upgrading to get flows.- resources to v1 API. (#3924, @aliok)

New Features

  • Kafka Channel and Kafka Source support Kafka 2.6 (#1510, @pierDipi)
  • Uses k8s 18.8 APIs. No new features from them are being used however, just the client code.
    • 🗑️ Remove feature or internal logic

Bug Fixes

  • Cluster scoped KafkaChannel dispatcher is now created with 0 replicas in advance and will be scaled up with the creation of the first KafkaChannel. No manual operation is needed when upgrading. (#1536, @aliok)
  • when kafkasource goes into “sink not found” status, receiver adapter will be deleted. The receiver adapter will be created again when the sink is available and ready to receive events. (#1533, @itsmurugappan)

Moves

Knative Eventing Contrib release v0.18.7

08 Dec 10:26
eaa5916
Compare
Choose a tag to compare

Action Required

  • Change storage versions of flows.- resources from v1beta1 to v1:
    • “channels.messaging.knative.dev” \
    • “inmemorychannels.messaging.knative.dev” \
    • You must run pre-install job prior to upgrading to get messaging.- resources to v1 API. ([#3925]. (knative/eventing#3925), @aliok)
  • Change storage versions of flows.- resources from v1beta1 to v1:
    • “parallels.flows.knative.dev”
    • “sequences.flows.knative.dev”
    • You must run pre-install job prior to upgrading to get flows.- resources to v1 API. (#3924, @aliok)

New Features

  • Kafka Channel and Kafka Source support Kafka 2.6 (#1510, @pierDipi)
  • Uses k8s 18.8 APIs. No new features from them are being used however, just the client code.
    • 🗑️ Remove feature or internal logic

Bug Fixes

  • Cluster scoped KafkaChannel dispatcher is now created with 0 replicas in advance and will be scaled up with the creation of the first KafkaChannel. No manual operation is needed when upgrading. (#1536, @aliok)
  • when kafkasource goes into “sink not found” status, receiver adapter will be deleted. The receiver adapter will be created again when the sink is available and ready to receive events. (#1533, @itsmurugappan)

Moves

Knative Eventing Contrib release v0.18.6

01 Dec 10:26
88c73c7
Compare
Choose a tag to compare

Action Required

  • Change storage versions of flows.- resources from v1beta1 to v1:
    • “channels.messaging.knative.dev” \
    • “inmemorychannels.messaging.knative.dev” \
    • You must run pre-install job prior to upgrading to get messaging.- resources to v1 API. ([#3925]. (knative/eventing#3925), @aliok)
  • Change storage versions of flows.- resources from v1beta1 to v1:
    • “parallels.flows.knative.dev”
    • “sequences.flows.knative.dev”
    • You must run pre-install job prior to upgrading to get flows.- resources to v1 API. (#3924, @aliok)

New Features

  • Kafka Channel and Kafka Source support Kafka 2.6 (#1510, @pierDipi)
  • Uses k8s 18.8 APIs. No new features from them are being used however, just the client code.
    • 🗑️ Remove feature or internal logic

Bug Fixes

  • Cluster scoped KafkaChannel dispatcher is now created with 0 replicas in advance and will be scaled up with the creation of the first KafkaChannel. No manual operation is needed when upgrading. (#1536, @aliok)
  • when kafkasource goes into “sink not found” status, receiver adapter will be deleted. The receiver adapter will be created again when the sink is available and ready to receive events. (#1533, @itsmurugappan)

Moves

Knative Eventing Contrib release v0.18.5

17 Nov 10:15
3de76f3
Compare
Choose a tag to compare

Action Required

  • Change storage versions of flows.- resources from v1beta1 to v1:
    • “channels.messaging.knative.dev” \
    • “inmemorychannels.messaging.knative.dev” \
    • You must run pre-install job prior to upgrading to get messaging.- resources to v1 API. ([#3925]. (knative/eventing#3925), @aliok)
  • Change storage versions of flows.- resources from v1beta1 to v1:
    • “parallels.flows.knative.dev”
    • “sequences.flows.knative.dev”
    • You must run pre-install job prior to upgrading to get flows.- resources to v1 API. (#3924, @aliok)

New Features

  • Kafka Channel and Kafka Source support Kafka 2.6 (#1510, @pierDipi)
  • Uses k8s 18.8 APIs. No new features from them are being used however, just the client code.
    • 🗑️ Remove feature or internal logic

Bug Fixes

  • Cluster scoped KafkaChannel dispatcher is now created with 0 replicas in advance and will be scaled up with the creation of the first KafkaChannel. No manual operation is needed when upgrading. (#1536, @aliok)
  • when kafkasource goes into “sink not found” status, receiver adapter will be deleted. The receiver adapter will be created again when the sink is available and ready to receive events. (#1533, @itsmurugappan)

Moves

Knative Eventing Contrib release v0.18.4

10 Nov 10:16
1f575c2
Compare
Choose a tag to compare

Action Required

  • Change storage versions of flows.- resources from v1beta1 to v1:
    • “channels.messaging.knative.dev” \
    • “inmemorychannels.messaging.knative.dev” \
    • You must run pre-install job prior to upgrading to get messaging.- resources to v1 API. ([#3925]. (knative/eventing#3925), @aliok)
  • Change storage versions of flows.- resources from v1beta1 to v1:
    • “parallels.flows.knative.dev”
    • “sequences.flows.knative.dev”
    • You must run pre-install job prior to upgrading to get flows.- resources to v1 API. (#3924, @aliok)

New Features

  • Kafka Channel and Kafka Source support Kafka 2.6 (#1510, @pierDipi)
  • Uses k8s 18.8 APIs. No new features from them are being used however, just the client code.
    • 🗑️ Remove feature or internal logic

Bug Fixes

  • Cluster scoped KafkaChannel dispatcher is now created with 0 replicas in advance and will be scaled up with the creation of the first KafkaChannel. No manual operation is needed when upgrading. (#1536, @aliok)
  • when kafkasource goes into “sink not found” status, receiver adapter will be deleted. The receiver adapter will be created again when the sink is available and ready to receive events. (#1533, @itsmurugappan)

Moves

Knative Eventing Contrib release v0.17.8

10 Nov 10:16
cfad5be
Compare
Choose a tag to compare

New Features

Bug Fixes

  • KafkaChannel now correctly implements tracing using eventing-wise tracing configuration from config-tracing (#1155, @slinkydeveloper)
  • KafkaChannel conversion v1beta1<>v1alpha1 is fixed (#1398, @aliok)

Other Changes

  • Reconcile KafkaChannel using v1beta1 api shape. Operate on dependent resources (Subscriptions, etc.) using their v1 shapes. (#1407, @aliok)
  • Reconcile KafkaSource and KafkaBinding using v1beta1 api shape. Operate on dependent resources (Subscriptions, etc.) using their v1 shapes. Note that resource and serviceAccountName fields are removed from the types in v1beta1. (#1405, @aliok)

Knative Eventing Contrib release v0.18.3

03 Nov 10:15
dd3a4ff
Compare
Choose a tag to compare

Action Required

  • Change storage versions of flows.- resources from v1beta1 to v1:
    • “channels.messaging.knative.dev” \
    • “inmemorychannels.messaging.knative.dev” \
    • You must run pre-install job prior to upgrading to get messaging.- resources to v1 API. ([#3925]. (knative/eventing#3925), @aliok)
  • Change storage versions of flows.- resources from v1beta1 to v1:
    • “parallels.flows.knative.dev”
    • “sequences.flows.knative.dev”
    • You must run pre-install job prior to upgrading to get flows.- resources to v1 API. (#3924, @aliok)

New Features

  • Kafka Channel and Kafka Source support Kafka 2.6 (#1510, @pierDipi)
  • Uses k8s 18.8 APIs. No new features from them are being used however, just the client code.
    • 🗑️ Remove feature or internal logic

Bug Fixes

  • Cluster scoped KafkaChannel dispatcher is now created with 0 replicas in advance and will be scaled up with the creation of the first KafkaChannel. No manual operation is needed when upgrading. (#1536, @aliok)
  • when kafkasource goes into “sink not found” status, receiver adapter will be deleted. The receiver adapter will be created again when the sink is available and ready to receive events. (#1533, @itsmurugappan)

Moves

Knative Eventing Contrib release v0.17.7

03 Nov 10:15
090e2b3
Compare
Choose a tag to compare

New Features

Bug Fixes

  • KafkaChannel now correctly implements tracing using eventing-wise tracing configuration from config-tracing (#1155, @slinkydeveloper)
  • KafkaChannel conversion v1beta1<>v1alpha1 is fixed (#1398, @aliok)

Other Changes

  • Reconcile KafkaChannel using v1beta1 api shape. Operate on dependent resources (Subscriptions, etc.) using their v1 shapes. (#1407, @aliok)
  • Reconcile KafkaSource and KafkaBinding using v1beta1 api shape. Operate on dependent resources (Subscriptions, etc.) using their v1 shapes. Note that resource and serviceAccountName fields are removed from the types in v1beta1. (#1405, @aliok)

Knative Eventing Contrib release v0.18.2

27 Oct 10:19
4f0b170
Compare
Choose a tag to compare

Action Required

  • Change storage versions of flows.- resources from v1beta1 to v1:
    • “channels.messaging.knative.dev” \
    • “inmemorychannels.messaging.knative.dev” \
    • You must run pre-install job prior to upgrading to get messaging.- resources to v1 API. ([#3925]. (knative/eventing#3925), @aliok)
  • Change storage versions of flows.- resources from v1beta1 to v1:
    • “parallels.flows.knative.dev”
    • “sequences.flows.knative.dev”
    • You must run pre-install job prior to upgrading to get flows.- resources to v1 API. (#3924, @aliok)

New Features

  • Kafka Channel and Kafka Source support Kafka 2.6 (#1510, @pierDipi)
  • Uses k8s 18.8 APIs. No new features from them are being used however, just the client code.
    • 🗑️ Remove feature or internal logic

Bug Fixes

  • Cluster scoped KafkaChannel dispatcher is now created with 0 replicas in advance and will be scaled up with the creation of the first KafkaChannel. No manual operation is needed when upgrading. (#1536, @aliok)
  • when kafkasource goes into “sink not found” status, receiver adapter will be deleted. The receiver adapter will be created again when the sink is available and ready to receive events. (#1533, @itsmurugappan)

Moves

Knative Eventing Contrib release v0.17.6

20 Oct 11:01
ff520a0
Compare
Choose a tag to compare

New Features

Bug Fixes

  • KafkaChannel now correctly implements tracing using eventing-wise tracing configuration from config-tracing (#1155, @slinkydeveloper)
  • KafkaChannel conversion v1beta1<>v1alpha1 is fixed (#1398, @aliok)

Other Changes

  • Reconcile KafkaChannel using v1beta1 api shape. Operate on dependent resources (Subscriptions, etc.) using their v1 shapes. (#1407, @aliok)
  • Reconcile KafkaSource and KafkaBinding using v1beta1 api shape. Operate on dependent resources (Subscriptions, etc.) using their v1 shapes. Note that resource and serviceAccountName fields are removed from the types in v1beta1. (#1405, @aliok)