Add initial support for identity hashes. #4910

kevina · 2018-04-03T08:19:19Z

Still a work in progress.

Tested by hand.

Needs shareness tests.

I am breaking this p.r. into two parts. For part one see #5117, part two is pending.

magik6k · 2018-04-03T11:27:20Z

core/builder.go

@@ -189,14 +190,16 @@ func setupNode(ctx context.Context, n *IpfsNode, cfg *BuildCfg) error {
 		opts.HasBloomFilterSize = 0
 	}

-	cbs, err := bstore.CachedBlockstore(ctx, bs, opts)
+	wbs, err := bstore.CachedBlockstore(ctx, bs, opts)


What does w in wbs stand for?

magik6k · 2018-04-03T11:39:23Z

thirdparty/idstore/idstore.go

+}
+
+func (b *idstore) PutMany(bs []blocks.Block) error {
+	var good []blocks.Block


I'd preallocate this to be the size of len(bs) as in most cases most blocks will be in this array. I'd also call it toPut or something like that, good sounds weird to me in this context

License: MIT Signed-off-by: Kevin Atkinson <k@kevina.org>

Kubuxu · 2018-04-05T16:53:17Z

thirdparty/idstore/idstore.go

 // idstore wraps a BlockStore to add support for identity hashes
 type idstore struct {
 	bs bls.Blockstore
 }

-func IdStore(bs bls.Blockstore) bls.Blockstore {
+func IdStore(bs bls.Blockstore) *idstore {


Any reason for exporting the implementation structure instead of the interface? It is generally better to export the interface as then it is clear what contract it follows.

No. Changed back.

License: MIT Signed-off-by: Kevin Atkinson <k@kevina.org>

kevina · 2018-04-05T17:17:13Z

Note: ipfs add --hash=id is problematic due the implicit creation of directory entry:

$ ipfs add --hash=id 64bytes
zB7EoQcn4hmgrzo7SKs4Dn9JxnqRnzMqopdjakoog5EQPgziUnDKQrKCFEkytjoN8TgZnXGt8ndvMwkmzQEXJxq8bgDkQ
Error: identity hash of 87 bytes longer than maximum size of 64 bytes

The error is for the wrapping directory entry, not the hash for the 64byte file. This works:

$ ipfs get zB7EoQcn4hmgrzo7SKs4Dn9JxnqRnzMqopdjakoog5EQPgziUnDKQrKCFEkytjoN8TgZnXGt8ndvMwkmzQEXJxq8bgDkQ > out

In particular for the ability to use the identity hash when the data is less than a certain threshold. License: MIT Signed-off-by: Kevin Atkinson <k@kevina.org>

License: MIT Signed-off-by: Kevin Atkinson <k@kevina.org>

kevina · 2018-04-13T00:50:04Z

@Stebalien @whyrusleeping since id-hashes are primary useful as an optimization to inline tiny files I want ahead and added an option to add. This change touched a lot of files since it involved changing passing around the cid Prefix with a new CidOpts that included an option to switch to use the id-hash if the contents was less than a certain size. Then instead of using Prefix.sum() CidOpts.Sum() was used.

The add option now has a --id-hash-limit option to control when the id hash is used, if you like it I can add it to ipfs files command also.

If you are okay with the Prefix to CidOpts part I would like to get that in ASAP to avoid conflicts, or worse, before some of that code gets factored out into a separate package.

Stebalien

Thanks for working through this. The CidOpts struct really rubs me the wrong way but I can't think of a better way to thread this through while keeping it configurable. Maybe push it down lower (into go-block-format)?

Does this only apply to raw blocks? Ideally, it would apply to all IPLD objects.

Stebalien · 2018-04-16T07:06:02Z

core/commands/add.go

@@ -14,6 +14,7 @@ import (
 	dag "github.com/ipfs/go-ipfs/merkledag"
 	dagtest "github.com/ipfs/go-ipfs/merkledag/test"
 	mfs "github.com/ipfs/go-ipfs/mfs"
+	cide "github.com/ipfs/go-ipfs/thirdparty/cidextra"


I assume this is temporary.

More or less, I would like to get something working first, merge this p.r. and then worry about finding a better place for the two new packages in thirdparty.

Stebalien · 2018-04-16T07:21:59Z

core/commands/add.go

@@ -119,6 +121,7 @@ You can now check what blocks have been created by:
 		cmdkit.BoolOption(fstoreCacheOptionName, "Check the filestore for pre-existing blocks. (experimental)"),
 		cmdkit.IntOption(cidVersionOptionName, "CID version. Defaults to 0 unless an option that depends on CIDv1 is passed. (experimental)"),
 		cmdkit.StringOption(hashOptionName, "Hash function to use. Implies CIDv1 if not sha2-256. (experimental)").WithDefault("sha2-256"),
+		cmdkit.IntOption(idHashLimitOptionName, "Id hash maxium size. -1 disables. (experimental)").WithDefault(-1),


Personally, I wouldn't make this this configurable. I'd have a fixed option and set the size to 64 bytes. I doubt there are any valid reasons for picking a non-standard value here (other than, maybe choosing between 32 bytes and 64 bytes). I would not allow more than 64 bytes as CIDs are supposed to be small.

Okay I will add an "--inline" option and keep this option, but set the default to 64.

Note there is an internal check that prevents this value from being set to the maximum id-hash size which is currently 64.

Stebalien · 2018-04-16T07:27:34Z

thirdparty/cidextra/cidextra.go

+
+type Opts struct {
+	cid.Prefix
+	idHashThres int // 0 disables, otherwise 1 + limit


Why the +1? Zero initialize?

Yes to allow for zero initialization. As the type is exported there is nothing preventing the user from direct initialization.

Stebalien · 2018-04-16T07:38:23Z

thirdparty/idstore/idstore.go

+	return &idstore{bs}
+}
+
+func extractContents(k *cid.Cid) (bool, []byte, error) {


We'll probably want to move this (and maybe a few other things) to, e.g., go-block. We'll want this stuff usable outside of go-ipfs.

See my earlier comment, I want to first worry about getting something working and then we can move the my two new thirdparty packages to a better location.

kevina · 2018-04-16T08:47:55Z

Does this only apply to raw blocks? Ideally, it would apply to all IPLD objects.

It also applies to protobuf objects.

License: MIT Signed-off-by: Kevin Atkinson <k@kevina.org>

Kubuxu · 2018-04-17T13:49:33Z

We are cutting down thirdparty packages. The CID security was a huge exception from that because we needed to have a possible security hole fixed before the release and libp2p dependency tree was causing problems.

I need to object introduction of code to thirdparty.

kevina · 2018-04-17T18:45:13Z

@Stebalien @Kubuxu the intent of both thirdparty packages where for them to be short lived. Both of them I intent to merge in another package outside of go-ipfs, but I thought it would be easier to both code and review if all the relevent changes are in one p.r. rather than spread out over several. If you will not accept or even review this p.r. since it introduces thirdparty packages please let me know and I will first get those changes into an appropriate external package.

mib-kd743naq · 2018-04-17T19:01:17Z

@kevina in the meantime should it be possible for me to checkout f0a4f29 and build it locally to verify whether the web gateway will read my 3rd-party blocks with identity data mixed in?

Basically asking whether I should expect that specific commit to just work as far as reading identity-containing blocks is concerned?

kevina · 2018-04-17T19:11:10Z

@mib-kd743naq yes it should be. Before this commit id-hashes where actually supported, they just where not optimized.

kevina · 2018-04-17T19:49:44Z

@Kubuxu @whyrusleeping @Stebalien since id hashes are possible to use without this p.r. there is the very real possibility that blockes with an id-hash could be stored in the datastore and never removed. I made the Delete always pass though the request so the g.c. should in theory remove them if they are not pinned, but this needs testing. For simplicity I propose we add a config option DisableIdHashOpt that is intended to only be used for testing, I can then use this config option to write a sharness test that inject an id hash and then enable the option and see if the GC can remove it. The alternative is to write a unit test that somehow bypasses the id-store and then calls the GC to see if it is somehow removed, this will likely be more work and I imagine that the config option would be useful in other contexts.

magik6k · 2018-04-18T11:02:30Z

Why not just add that option on the idstore struct and write a small go test for it?

kevina · 2018-04-25T04:46:50Z

@magik6k I could do that, but I think I a better way is to just remove all id hashes from the datastore as part of a migration, see #4766.

mib-kd743naq · 2018-04-25T10:08:55Z

@kevina in the meantime should it be possible for me to checkout f0a4f29 and build it locally to verify whether the web gateway will read my 3rd-party blocks with identity data mixed in?

@mib-kd743naq yes it should be. Before this commit id-hashes where actually supported, they just where not optimized.

Great stuff! You are indeed correct that identity hashes already work. E.g. this is a single block:
https://ipfs.io/ipfs/zdjA8o9D3n7NhdXGP5QZRftEyATq8pJamtFVQhQN4VHriUgR8

There is a bit of work to be done around the CLI abort however. Observe:

~/inlines$ ipfs ls zdjA8e3nEZNdas7TMDHEJuQB9r1RDQt9NstfH8AtYmetNzQCd
zdjA8dEswZqPMYnazeqZfj679FAH5dSti2R4zMq54AxHXT4k7 122 IllegalOverlargeInline/
zdjA8o9D3n7NhdXGP5QZRftEyATq8pJamtFVQhQN4VHriUgR8 32  LegitInlines/

~/inlines$ ipfs get zdjA8e3nEZNdas7TMDHEJuQB9r1RDQt9NstfH8AtYmetNzQCd/LegitInlines; echo "ExitCode: $?"
Saving file(s) to LegitInlines
 122 B / 122 B [=========================================================================================================================================================================================] 100.00% 0s
ExitCode: 0

~/inlines$ ipfs get zdjA8e3nEZNdas7TMDHEJuQB9r1RDQt9NstfH8AtYmetNzQCd/IllegalOverlargeInline; echo "ExitCode: $?"
Saving file(s) to IllegalOverlargeInline
 279 B / 279 B [=========================================================================================================================================================================================] 100.00% 0s
ExitCode: 0

~/inlines$ ls -la
total 0
drwxr-xr-x  3 ipfs ipfs  26 Apr 25 12:04 .
drwxr-xr-x 18 ipfs ipfs 435 Apr 25 12:03 ..
drwxr-xr-x  2 ipfs ipfs  50 Apr 25 12:04 LegitInlines

The ipfs get did not exit with non-zero, yet it ( correctly ) did not create a local copy due to an invalid 122byte inline.

Thoughts?

kevina · 2018-06-01T23:51:45Z

@Stebalien @Kubuxu

We'll probably want to move this (and maybe a few other things) to, e.g., go-block. We'll want this stuff usable outside of go-ipfs.

go-blocks doesn't exist. I will likely combine the two thirdparty into a single package go-ipfs-idstore.

Stebalien · 2018-06-07T04:18:37Z

@kevina sorry, I meant go-block-format. However, a separate package is fine.

kevina · 2018-06-07T04:22:21Z

@Stebalien I voted against a separate package and instead added the idstore to go-ipfs-blockstore (see ipfs/go-ipfs-blockstore#4). The parts needed for supported id hashes automatically I think best belong in go-cid although I can be convinced otherwise. I am not sure either part belong in go-block-format.

Stebalien · 2018-06-07T04:26:38Z

Fair enough (given that I've reviewed that, I should have remembered this...).

The parts needed for supported id hashes automatically I think best belong in go-cid although I can be convinced otherwise.

A ExtractInlineBlock(cid) Block function would have to go in go-block-format but a simple ExtractInlineData(cid) []byte could go in go-cid. Up to you.

kevina · 2018-06-07T04:35:54Z

I didn't think about creating those functions because they are not really needed (but can be useful). What I think should go in go-cid is a renamed Opts (see https://github.com/ipfs/go-ipfs/blob/f0a4f297fc095b14aef58ded32864e7fe89f3974/thirdparty/cidextra/cidextra.go) to automatically create inline identity-hashes when below the threshold. This relates to by comments in ipfs/go-cid#23 (comment). I am now think that maybe this should be called Format.

Stebalien · 2018-06-07T05:56:21Z

Ah. Yeah, good point. And making this a part of Format or whatever we end up calling that removes my one reservation with this patch.

kevina · 2018-06-14T06:31:05Z

Closing in favor of #5117.

kevina requested a review from Kubuxu as a code owner April 3, 2018 08:19

ghost assigned kevina Apr 3, 2018

ghost added the status/in-progress In progress label Apr 3, 2018

magik6k reviewed Apr 3, 2018

View reviewed changes

Add initial support for identity hashes.

f7b6e67

License: MIT Signed-off-by: Kevin Atkinson <k@kevina.org>

kevina force-pushed the kevina/idhash branch from c943525 to f7b6e67 Compare April 3, 2018 18:44

kevina mentioned this pull request Apr 3, 2018

Length Limit for CID/Multihash? #4918

Closed

kevina force-pushed the kevina/idhash branch from 771f31b to d0d53e9 Compare April 5, 2018 16:46

Kubuxu reviewed Apr 5, 2018

View reviewed changes

Enforce a length limit on identity hashes.

6a6fd90

License: MIT Signed-off-by: Kevin Atkinson <k@kevina.org>

kevina force-pushed the kevina/idhash branch from d0d53e9 to 6a6fd90 Compare April 5, 2018 16:55

kevina added 2 commits April 12, 2018 15:15

Use "CidOpts" instead of just "Prefix" for additional flexibility.

42ee69d

In particular for the ability to use the identity hash when the data is less than a certain threshold. License: MIT Signed-off-by: Kevin Atkinson <k@kevina.org>

Add "id-hash-limit" option to "ipfs add" command.

bb4a520

License: MIT Signed-off-by: Kevin Atkinson <k@kevina.org>

kevina force-pushed the kevina/idhash branch from cbcfc51 to bb4a520 Compare April 12, 2018 20:12

Stebalien reviewed Apr 16, 2018

View reviewed changes

Add "--inline" option to add, Use 64 as the default id-hash limit.

f0a4f29

License: MIT Signed-off-by: Kevin Atkinson <k@kevina.org>

kevina mentioned this pull request Apr 18, 2018

Bump Repo Version and Provide Migration before strict Cid code lands #4766

Open

kevina mentioned this pull request Jun 5, 2018

Add a special blockstore to support identity hashes. ipfs/go-ipfs-blockstore#4

Merged

kevina closed this Jun 14, 2018

ghost removed the status/in-progress In progress label Jun 14, 2018

kevina mentioned this pull request Jun 14, 2018

CID length and identity hashes multiformats/cid#21

Open

2 tasks

Stebalien deleted the kevina/idhash branch February 28, 2019 22:28

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Add initial support for identity hashes. #4910

Add initial support for identity hashes. #4910

kevina commented Apr 3, 2018 •

edited

magik6k Apr 3, 2018

kevina Apr 3, 2018

magik6k Apr 3, 2018

Kubuxu Apr 5, 2018

kevina Apr 5, 2018

kevina commented Apr 5, 2018

kevina commented Apr 13, 2018

Stebalien left a comment

Stebalien Apr 16, 2018

kevina Apr 16, 2018

Stebalien Apr 16, 2018

kevina Apr 16, 2018

Stebalien Apr 16, 2018

kevina Apr 16, 2018

Stebalien Apr 16, 2018

kevina Apr 16, 2018 •

edited

kevina commented Apr 16, 2018 •

edited

Kubuxu commented Apr 17, 2018

kevina commented Apr 17, 2018

mib-kd743naq commented Apr 17, 2018

kevina commented Apr 17, 2018 •

edited

kevina commented Apr 17, 2018

magik6k commented Apr 18, 2018

kevina commented Apr 25, 2018

mib-kd743naq commented Apr 25, 2018

kevina commented Jun 1, 2018 •

edited

Stebalien commented Jun 7, 2018

kevina commented Jun 7, 2018 •

edited

Stebalien commented Jun 7, 2018

kevina commented Jun 7, 2018 •

edited

Stebalien commented Jun 7, 2018

kevina commented Jun 14, 2018

Add initial support for identity hashes. #4910

Add initial support for identity hashes. #4910

Conversation

kevina commented Apr 3, 2018 • edited

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

kevina commented Apr 5, 2018

kevina commented Apr 13, 2018

Stebalien left a comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

kevina Apr 16, 2018 • edited

Choose a reason for hiding this comment

kevina commented Apr 16, 2018 • edited

Kubuxu commented Apr 17, 2018

kevina commented Apr 17, 2018

mib-kd743naq commented Apr 17, 2018

kevina commented Apr 17, 2018 • edited

kevina commented Apr 17, 2018

magik6k commented Apr 18, 2018

kevina commented Apr 25, 2018

mib-kd743naq commented Apr 25, 2018

kevina commented Jun 1, 2018 • edited

Stebalien commented Jun 7, 2018

kevina commented Jun 7, 2018 • edited

Stebalien commented Jun 7, 2018

kevina commented Jun 7, 2018 • edited

Stebalien commented Jun 7, 2018

kevina commented Jun 14, 2018

kevina commented Apr 3, 2018 •

edited

kevina Apr 16, 2018 •

edited

kevina commented Apr 16, 2018 •

edited

kevina commented Apr 17, 2018 •

edited

kevina commented Jun 1, 2018 •

edited

kevina commented Jun 7, 2018 •

edited

kevina commented Jun 7, 2018 •

edited