Skip to content

Collaborative spam filter for Freenet. Short overview: https://goo.gl/ZR3zg5 Whitepaper: https://git.io/vXtHN Suppor contact & maintainer: @xor-freenet

License

Notifications You must be signed in to change notification settings

hyphanet/plugin-WebOfTrust

Repository files navigation

Build status of branch master on freenet's repository Build status of branch master on xor-freenet's repository Build status of branch next on freenet's repository Build status of branch next on xor-freenet's repository

Web of Trust - a collaborative spam filter for Freenet

The Freenet plugin Web of Trust (WoT) tries to solve the problem of spam being an important threat to prevent in an anonymous, censorship-resistant network such as Freenet:
When an attacker wants to take down content but cannot do so because censorship is not possible on that network they will instead attempt to get rid of it by drowning it in spam.

Conventional spam filters cannot work in such an environment:

  • An attacker is anonymous like everyone else so they cannot be blocked by e.g. an IP address.
  • Because Freenet is a peer-to-peer network its available bandwidth is scarce and thus spam must not even be downloaded before filtering it out in order to avoid denial of service.
    Thus filtering spam by e.g. lists of bad words won't work because it would have to be downloaded for that.

WoT deals with these issues by allowing each user to create so-called identities which can assign trust values to the identities of other users and publish these.
The trust values constitute a democratic vote among users, where the distance of other users' identities in the social graph of trust values is used to weigh their votes in your local WoT.
This is similar to the concept of subsidiarity in democracy.
The result of this poll decides if a particular identity is considered as legitimate or as a spammer. The content of spammers is completely ignored then, it won't cause any network traffic.
Users can specify their own trust values to override the poll results, but they don't have to spend time upon that if they instead want to use what the community has collaboratively decided.

While WoT does have a user interface of its own which can be used to manage identities and trusts, it is intended to be used as a general-purpose library to allow actual Freenet applications to be built upon it.
As of 2022 these are:

For an in-depth explanation of how WoT works see the whitepaper / core developer's manual.

Status / News

As of 2022 WoT is actively maintained by xor-freenet.
Development news are posted about every 1-3 weeks on the FMS board freenet in threads called
Web of Trust development news YYYY-MM.

Contributing

While the repository for the officially shipped WoT binary is hosted on Freenet's GitHub, you may consider to instead create your pull requests at xor-freenet's WoT repository because:

  • Freenet's repository may lag some months behind the one of xor-freenet and merge conflicts can thus be avoided by using xor's repo.
  • You'll receive extended and accelerated review:
    xor wrote most of WoT's code and is actively working on it.
  • After his review xor will submit your code to the official Freenet developers for inclusion in the main repository on Freenet's GitHub.

WoT thoroughly obeys its style guideline.
For small PRs you do not have to read it, xor can point out violations during review if there are any.
However when doing larger contributions, or in case of change of maintainer, please do read it.

Usage

WoT is bundled with Freenet as a plugin.
To enable it, go to Configuration, then Plugins, and use Add an Official Plugin.

It will add a Community menu to the web interface and can be accessed by that.

Other plugins which use WoT as their back end may also provide UI to e.g. change trust values.

Support / Contact

You can:

  • mail xor@freenetproject.org
  • file a bug in the Web of Trust project on the Freenet bugtracker
  • or, to remain anonymous by using Freenet, post on the FMS board freenet.

xor-freenet will reply by these means within about a week.

Compiling

Dependencies

Clone the fred and plugin-WebOfTrust repositories into the same parent directory.
Initialize the git submodules by ( cd plugin-WebOfTrust && git submodule update --init ).
Compile fred by command line using ( cd fred && ./gradlew jar copyRuntimeLibs ), or for compiling it with Eclipse use the below instructions.

Compiling by command line

# With the Ant build script reference implementation:
ant
# If you get errors about missing classes check build.xml for whether the JAR locations are correct.

# With the new Gradle builder - it is fully tested against Ant (see tools/) but lacks some features.
# Its advantages are:
# - parallel unit test execution on all available CPU cores.
# - incremental builds are supported (leave out "clean jar").
gradle clean jar
# Wrong JAR locations can be fixed in the file build.gradle

The output WebOfTrust.jar will be in the dist directory.
You can load it on the Plugins page of the Freenet web interface.

Additional compilation options

# Compile and produce test coverage and code complexity statistics as HTML.
sudo apt install cobertura
ant -Dtest.coverage=true
firefox test-coverage/html/index.html
# Skip unit tests.
ant -Dtest.skip=true # With Ant
gradle -x test       # With Gradle
# Run a single unit test.
ant -Dtest.class=plugins.WebOfTrust.CLASSNAME
# Show test stdout/stderr with Gradle to debug failures, especially by obtaining the test's PRNG
# seed which can be used to reproduce a run by hardcoding it into the AbstractJUnit3/4BaseTest
# classes. Ant will show the output by default.
WOT__SHOW_GRADLE_TEST_OUTPUT=1 gradle test
# Benchmark all unit tests and produce sorted output to figure out the slowest ones
tools/benchmark-unit-tests
# Benchmark a single unit test and produce average runtime to improve it
tools/benchmark-unit-test TEST_CLASS TEST_FUNCTION NUMBER_OF_ITERATIONS

Compiling with Eclipse

These instructions have been written for the Eclipse package Eclipse IDE for Java Developers of version 2018-12 for Linux 64-bit, which you can get here.

  1. Import the fred project into Eclipse: File / Import... / Gradle / Existing Gradle Project.
  2. Configure the project to use Gradle version 4.10.3 at Right click the project / Properties / Gradle.
    Enable Automatic project Synchronization there as well.
  3. Enable Eclipse's Gradle executions and Gradle tasks views at Window / Show view / Other....
  4. In the Gradle Tasks view, right click fred and select Run Default Gradle Tasks.
    Wait for Gradle to finish. You can see its output and error messages in the Console view.
  5. Once the above step is finished, the green Run button in the main toolbar will show a run configuration for fred in its dropdown menu.
    Open the UI to edit it at Run / Run Configurations... and there set:
    • Gradle Tasks / Gradle tasks: jar copyRuntimeLibs
      The latter ensures Gradle copies all dependency JARs of Freenet to a single directory which WoT will use.
      TODO: Prefix with clean task once it doesn't break Version.class anymore.
    • Arguments / Program Arguments: -x test optionally to skip running the fred unit tests at every build.
  6. Re-run fred's Gradle with the above run configuration via Run / <configuration name>.
  7. Import the WoT project as type General / Existing Projects into Workspace - that type is what to use here because the WoT repository already contains an Eclipse project configuration.
  8. Ensure a Gradle run configuration for WoT is created by running the default tasks like you did for fred.
    Set its Gradle tasks to jar, or clean jar if you want to ensure the JAR is always fully rebuilt. Not fully rebuilding may cause e.g. deleted classes to persist in the JAR, though I have not tested if this still applies to a build system as modern as Gradle.
    If you want to run the unit tests through Eclipse's UI for that you also need to add testJar to the tasks to ensure the JAR containing the tests gets built.

Notice: Building using Project / Build project or Project / Build Automatically or the toolbar buttons does not seem to trigger Gradle with the said Eclipse version!
It seems that this only triggers Eclipse's internal Java builder which is used to empower Eclipse's own features.
As a consequence, manually run Gradle using the aforementioned Run button in case you need the WoT JAR as output, e.g. for the following Debugging section.
Running the unit tests is also done by that - using a Gradle run configuration which includes the test task - or by Eclipse's own UI for running tests.
The Eclipse UI however does not exclude certain slow tests which WoT's Gradle would only run optionally. So ideally you would use Gradle to run all tests in bulk, and the Eclipse UI to selectively repeat only single failing ones in order to debug them with the Eclipse debugger.

Notice: Should Eclipse show errors about missing JARs such as db4o.jar and say they prevent it from building: Notice that the JARs likely have in fact been created by the fred/WoT Gradle builders on the filesystem already, so you can fix Eclipse to notice them by:

  1. Right click the project / Gradle / Refresh Gradle Project.
  2. Project / Build Project to manually start a build. Automatic building might have to be disabled in the same menu.

Debugging

  1. Run fred's class freenet.node.NodeStarter using the Eclipse debugger.
  2. Browse to Freenet's Plugins page.
  3. Use the Load Plugin box to load PARENT_DIRECTORY/plugin-WebOfTrust/dist/WebOfTrust.jar.
  4. After the plugin is loaded, WoT will be accessible at the Community menu.
  5. Read the debugging instructions for further details.

Database analysis

Do not use the following tool upon your database while Freenet is running!
Backup your database before using it!

# Validate semantic integrity of the database and recompute all score values (= "computed trust" in the UI).
# This currently is mostly of diagnostic character for development purposes, it is unlikely to fix your
# database if WoT does not start, sorry.
tools/wotutil -testAndRepair DATABASE_FILE
# Execute a "Freenet Client Protocol" call upon the database.
# FCP is the protocol which applications built upon WoT use to access its API.
# For available functions see src/plugins/WebOfTrust/ui/fcp/FCPInterface.java
tools/wotutil -fcp DATABASE_FILE Message=WOT_FCP_CALL key1=value1 key2=value2 ...

Development

See:

About

Collaborative spam filter for Freenet. Short overview: https://goo.gl/ZR3zg5 Whitepaper: https://git.io/vXtHN Suppor contact & maintainer: @xor-freenet

Resources

License

Stars

Watchers

Forks

Packages

No packages published