📝 docs: replace 1.14 with 1.16 in READMEs

.github/README.md

@@ -118,7 +118,7 @@ These tests are performed by [TechEmpower](https://www.techempower.com/benchmark
 
 ## ⚙️ Installation
 
-Make sure you have Go installed ([download](https://go.dev/dl/)). Version `1.14` or higher is required.
+Make sure you have Go installed ([download](https://go.dev/dl/)). Version `1.16` or higher is required.
 
 Initialize your project by creating a folder and then running `go mod init github.com/your/repo` ([learn more](https://go.dev/blog/using-go-modules)) inside the folder. Then install Fiber with the [`go get`](https://pkg.go.dev/cmd/go/#hdr-Add_dependencies_to_current_module_and_install_them) command:
 

.github/README_ckb.md

@@ -114,7 +114,7 @@ func main() {
 
 ## ⚙️ دامەزراندن
 
-دڵنیا بە لەوەی کە لەناو ئامێرەکەت Go دامەزراوە ([دای بگرە](https://go.dev/dl/)). دەبێت وەشانەکەشی `1.14` یان سەرووتر بێت.
+دڵنیا بە لەوەی کە لەناو ئامێرەکەت Go دامەزراوە ([دای بگرە](https://go.dev/dl/)). دەبێت وەشانەکەشی `1.16` یان سەرووتر بێت.
 
 پڕۆژەکەت دەست پێ بکە بە دروستکردنی بوخچەیەک و کار پێ کردنی فەرمانی `go mod init github.com/your/repo` ([زیاتر](https://go.dev/blog/using-go-modules)) لەناو بوخچەکە. دواتریش بەم فەرمانەی خوارەوە فایبەر دامەزرێنە:
 

.github/README_de.md

@@ -114,7 +114,7 @@ Diese Tests wurden von [TechEmpower](https://www.techempower.com/benchmarks/#sec
 
 ## ⚙️ Installation
 
-Stelle sicher, dass du Go installiert hast ([Download hier](https://go.dev/dl/)). Version `1.14` oder neuer wird zu der Nutzung Fibers benötigt.
+Stelle sicher, dass du Go installiert hast ([Download hier](https://go.dev/dl/)). Version `1.16` oder neuer wird zu der Nutzung Fibers benötigt.
 
 Erstelle ein neues Project, indem du zunächst einen neuen Ordner erstellst und dort in diesem Ordner `go mod init github.com/dein/repo` ausführst ([hier mehr dazu](https://go.dev/blog/using-go-modules)). Daraufhin kannst du Fiber mit dem [`go get`](https://pkg.go.dev/cmd/go/#hdr-Add_dependencies_to_current_module_and_install_them) Kommandozeilenbefehl installieren:
 

.github/README_es.md

@@ -114,7 +114,7 @@ Estas pruebas son realizadas por [TechEmpower](https://www.techempower.com/bench
 
 ## ⚙️ Instalación
 
-Asegúrese de tener instalado Go ([descargar](https://go.dev/dl/)). Versión `1.14` o superior.
+Asegúrese de tener instalado Go ([descargar](https://go.dev/dl/)). Versión `1.16` o superior.
 
 Arranque su proyecto creando una nueva carpeta y ejecutando `go mod init github.com/your/repo` ([mas información](https://go.dev/blog/using-go-modules)) dentro del mismo directorio. Después instale Fiber mediante el comando [`go get`](https://pkg.go.dev/cmd/go/#hdr-Add_dependencies_to_current_module_and_install_them):
 

.github/README_fa.md

@@ -133,7 +133,7 @@ func main() {
 <br>
 <p align="center">
 <div dir="rtl">
-مطمئن شوید Go را نصب (<a href="https://go.dev/dl/">دانلود</a>) کرده اید. نسخه 1.14 یا بیشتر مورد نیاز است.<br>
+مطمئن شوید Go را نصب (<a href="https://go.dev/dl/">دانلود</a>) کرده اید. نسخه 1.16 یا بیشتر مورد نیاز است.<br>
 پروژه خود را با ساختن یک پوشه و سپس اجرای <code>go mod init github.com/your/repo</code> داخل پوشه (<a href="https://go.dev/blog/using-go-modules">یادگیری بیشتر</a>) راه اندازی کنید. سپس Fiber را با دستور <code><a href="https://pkg.go.dev/cmd/go/#hdr-Add_dependencies_to_current_module_and_install_them">go get</a></code> نصب کنید :
 <div dir="rtl">
 <br>

.github/README_fr.md

@@ -114,7 +114,7 @@ Ces tests sont effectués par [TechEmpower](https://www.techempower.com/benchmar
 
 ## ⚙️ Installation
 
-Make sure you have Go installed ([download](https://go.dev/dl/)). Version `1.14` or higher is required.
+Make sure you have Go installed ([download](https://go.dev/dl/)). Version `1.16` or higher is required.
 
 Initialize your project by creating a folder and then running `go mod init github.com/your/repo` ([learn more](https://go.dev/blog/using-go-modules)) inside the folder. Then install Fiber with the [`go get`](https://pkg.go.dev/cmd/go/#hdr-Add_dependencies_to_current_module_and_install_them) command:
 

.github/README_he.md

@@ -133,7 +133,7 @@ func main() {
 
 ## ⚙️ התקנה
 
-Make sure you have Go installed ([download](https://go.dev/dl/)). Version `1.14` or higher is required.
+Make sure you have Go installed ([download](https://go.dev/dl/)). Version `1.16` or higher is required.
 
 Initialize your project by creating a folder and then running `go mod init github.com/your/repo` ([learn more](https://go.dev/blog/using-go-modules)) inside the folder. Then install Fiber with the [`go get`](https://pkg.go.dev/cmd/go/#hdr-Add_dependencies_to_current_module_and_install_them) command:
 

.github/README_id.md

@@ -114,7 +114,7 @@ Pengukuran ini dilakukan oleh [TechEmpower](https://www.techempower.com/benchmar
 
 ## ⚙️ Instalasi
 
-Pastikan kamu sudah menginstalasi Golang ([unduh](https://go.dev/dl/)). Dengan versi `1.14` atau lebih tinggi [ Direkomendasikan ].
+Pastikan kamu sudah menginstalasi Golang ([unduh](https://go.dev/dl/)). Dengan versi `1.16` atau lebih tinggi [ Direkomendasikan ].
 
 Inisialisasi proyek kamu dengan membuat folder lalu jalankan `go mod init github.com/nama-kamu/repo` ([belajar lebih banyak](https://go.dev/blog/using-go-modules)) di dalam folder. Kemudian instal Fiber dengan perintah [`go get`](https://pkg.go.dev/cmd/go/#hdr-Add_dependencies_to_current_module_and_install_them):
 

.github/README_it.md

@@ -114,7 +114,7 @@ Questi test sono stati eseguiti da [TechEmpower](https://www.techempower.com/ben
 
 ## ⚙️ Installazione
 
-Assicurati di avere Go ([per scaricalro](https://go.dev/dl/)) installato. Devi avere la versione `1.14` o superiore.
+Assicurati di avere Go ([per scaricalro](https://go.dev/dl/)) installato. Devi avere la versione `1.16` o superiore.
 
 Inizializza il tuo progetto creando una cartella e successivamente usando il comando `go mod init github.com/la-tua/repo` ([per maggiori informazioni](https://go.dev/blog/using-go-modules)) dentro la cartella. Dopodiche installa Fiber con il comando [`go get`](https://pkg.go.dev/cmd/go/#hdr-Add_dependencies_to_current_module_and_install_them):
 

.github/README_ja.md

@@ -115,7 +115,7 @@ func main() {
 
 ## ⚙️ インストール
 
-Go がインストールされていることを確認してください ([ダウンロード](https://go.dev/dl/)). バージョン `1.14` またはそれ以上であることが必要です。
+Go がインストールされていることを確認してください ([ダウンロード](https://go.dev/dl/)). バージョン `1.16` またはそれ以上であることが必要です。
 
 フォルダを作成し、フォルダ内で `go mod init github.com/your/repo` ([learn more](https://go.dev/blog/using-go-modules)) を実行してプロジェクトを初期化してください。その後、 Fiber を以下の [`go get`](https://pkg.go.dev/cmd/go/#hdr-Add_dependencies_to_current_module_and_install_them) コマンドでインストールしてください。
 

.github/README_ko.md

@@ -114,7 +114,7 @@ func main() {
 
 ## ⚙️ 설치
 
-Go가 설치되어 있는 것을 확인해 주세요 ([download](https://go.dev/dl/)). 버전 1.14 또는 그 이상이어야 합니다.
+Go가 설치되어 있는 것을 확인해 주세요 ([download](https://go.dev/dl/)). 버전 1.16 또는 그 이상이어야 합니다.
 
 폴더를 생성하여 당신의 프로젝트를 초기화하고, 폴더 안에서 `go mod init github.com/your/repo` ([learn more](https://go.dev/blog/using-go-modules)) 를 실행하세요. 그리고 [`go get`](https://pkg.go.dev/cmd/go/#hdr-Add_dependencies_to_current_module_and_install_them) 명령어로 Fiber를 설치하세요:
 

.github/README_nl.md

@@ -114,7 +114,7 @@ Deze tests zijn uitgevoerd door [TechEmpower](https://www.techempower.com/benchm
 
 ## ⚙️ Installatie
 
-Make sure you have Go installed ([download](https://go.dev/dl/)). Version `1.14` or higher is required.
+Make sure you have Go installed ([download](https://go.dev/dl/)). Version `1.16` or higher is required.
 
 Initialize your project by creating a folder and then running `go mod init github.com/your/repo` ([learn more](https://go.dev/blog/using-go-modules)) inside the folder. Then install Fiber with the [`go get`](https://pkg.go.dev/cmd/go/#hdr-Add_dependencies_to_current_module_and_install_them) command:
 

.github/README_pt.md

@@ -114,7 +114,7 @@ Esses testes são realizados pelo [TechEmpower](https://www.techempower.com/benc
 
 ## ⚙️ Instalação
 
-Certifique-se de ter o Go instalado ([download](https://go.dev/dl/)). Versão `1.14` ou superior é obrigatória.
+Certifique-se de ter o Go instalado ([download](https://go.dev/dl/)). Versão `1.16` ou superior é obrigatória.
 
 Inicie seu projeto criando um diretório e então execute `go mod init github.com/your/repo` ([saiba mais](https://go.dev/blog/using-go-modules)) dentro dele. Então, instale o Fiber com o comando [`go get`](https://pkg.go.dev/cmd/go/#hdr-Add_dependencies_to_current_module_and_install_them):
 

.github/README_ru.md

@@ -114,7 +114,7 @@ func main() {
 
 ## ⚙️ Установка
 
-Убедитесь, что Go установлен ([скачать](https://go.dev/dl/)). Требуется версия `1.14` или выше.
+Убедитесь, что Go установлен ([скачать](https://go.dev/dl/)). Требуется версия `1.16` или выше.
 
 Инициализируйте проект, создав папку, а затем запустив `go mod init github.com/your/repo` ([подробнее](https://go.dev/blog/using-go-modules)) внутри этой папки. Далее, установите Fiber с помощью команды [`go get`](https://pkg.go.dev/cmd/go/#hdr-Add_dependencies_to_current_module_and_install_them):
 

.github/README_sa.md

@@ -120,7 +120,7 @@ func main() {
 
 ## ⚙️ تثبيت
 
-تأكد من تثبيت Go ([تحميل](https://go.dev/dl/)). الإصدار `1.14` أو أعلى مطلوب.
+تأكد من تثبيت Go ([تحميل](https://go.dev/dl/)). الإصدار `1.16` أو أعلى مطلوب.
 
 ابدأ مشروعك بإنشاء مجلد ثم تشغيله `go mod init github.com/your/repo` ([أعرف أكثر](https://go.dev/blog/using-go-modules))
 داخل المجلد. ثم قم بتثبيت Fiber باستخدام ملف [`go get`](https://pkg.go.dev/cmd/go/#hdr-Add_dependencies_to_current_module_and_install_them) أمر:

.github/README_tr.md

@@ -114,7 +114,7 @@ Bu testler [TechEmpower](https://www.techempower.com/benchmarks/#section=data-r1
 
 ## ⚙️ Kurulum
 
-Go'nun `1.14` sürümü ([indir](https://go.dev/dl/)) veya daha yüksek bir sürüm gerekli.
+Go'nun `1.16` sürümü ([indir](https://go.dev/dl/)) veya daha yüksek bir sürüm gerekli.
 
 Bir dizin oluşturup dizinin içinde `go mod init github.com/your/repo` komutunu yazarak projenizi geliştirmeye başlayın ([daha fazla öğren](https://go.dev/blog/using-go-modules)). Ardından Fiber'ı kurmak için [`go get`](https://pkg.go.dev/cmd/go/#hdr-Add_dependencies_to_current_module_and_install_them) komutunu çalıştırın:
 
@@ -146,7 +146,7 @@ Fiber, internet üzerinde en popüler web framework'ü olan Express'ten **esinle
 
 ## ⚠️ Sınırlamalar
 
--   Fiber unsafe kullanımı sebebiyle Go'nun son sürümüyle her zaman uyumlu olmayabilir. Fiber 2.40.0, Go 1.14 ile 1.19 sürümleriyle test edildi.
+-   Fiber unsafe kullanımı sebebiyle Go'nun son sürümüyle her zaman uyumlu olmayabilir. Fiber 2.40.0, Go 1.16 ile 1.19 sürümleriyle test edildi.
 -   Fiber net/http arabirimiyle uyumlu değildir. Yani gqlgen veya go-swagger gibi net/http ekosisteminin parçası olan projeleri kullanamazsınız.
 
 ## 👀 Örnekler
@@ -603,7 +603,7 @@ Harici olarak barındırılan middlewareların modüllerinin listesi. Bu middlew
 | [redirect](https://github.com/gofiber/redirect)   | Yönlendirme middleware  'ı.                                                                                                                                               |
 | [rewrite](https://github.com/gofiber/rewrite)     | Rewrite middleware, sağlanan kurallara göre URL yolunu yeniden yazar. Geriye dönük uyumluluk için veya yalnızca daha temiz ve daha açıklayıcı bağlantılar oluşturmak için yardımcı olabilir. |
 | [storage](https://github.com/gofiber/storage)     | Fiber'in Storage yapısını destekleyen birçok storage driver'ı verir. Bu sayede depolama gerektiren Fiber middlewarelarında kolaylıkla kullanılabilir.                                                   |
-| [template](https://github.com/gofiber/template)   | Bu paket, Fiber `v2.x.x`, Go sürüm 1.14 veya üzeri gerekli olduğunda kullanılabilecek 9 template motoru içerir.                                                                             |
+| [template](https://github.com/gofiber/template)   | Bu paket, Fiber `v2.x.x`, Go sürüm 1.16 veya üzeri gerekli olduğunda kullanılabilecek 9 template motoru içerir.                                                                             |
 | [websocket](https://github.com/gofiber/websocket) | Yereller desteğiyle Fiber için Fasthttp WebSocket'a dayalıdır!                                                                                                                               |
 
 ## 🕶️ Awesome Listesi

.github/README_uk.md

@@ -124,7 +124,7 @@ func main() {
 
 ## ⚙️ Встановлення
 
-Переконайтеся, що Go встановлено ([завантажити](https://go.dev/dl/)). Потрібна версія `1.14` або вища.
+Переконайтеся, що Go встановлено ([завантажити](https://go.dev/dl/)). Потрібна версія `1.16` або вища.
 
 Ініціалізуйте проект, створивши папку, а потім запустивши `go mod init github.com/your/repo`
 ([детальніше](https://go.dev/blog/using-go-modules)) всередині цієї папки. Далі встановіть Fiber за допомогою

.github/README_zh-CN.md

@@ -116,7 +116,7 @@ func main() {
 
 ## ⚙️ 安装
 
-确保已安装 `1.14` 或更高版本的 Go ([下载](https://go.dev/dl/))。
+确保已安装 `1.16` 或更高版本的 Go ([下载](https://go.dev/dl/))。
 
 通过创建文件夹并在文件夹内运行 `go mod init github.com/your/repo` ([了解更多](https://go.dev/blog/using-go-modules)) 来初始化项目，然后使用 [`go get`](https://pkg.go.dev/cmd/go/#hdr-Add_dependencies_to_current_module_and_install_them) 命令安装 Fiber：
 

.github/README_zh-TW.md

@@ -114,7 +114,7 @@ func main() {
 
 ## ⚙️ 安裝
 
-確保已安裝 Go 版本 `1.14` 或以上 ([下載](https://go.dev/dl/))。
+確保已安裝 Go 版本 `1.16` 或以上 ([下載](https://go.dev/dl/))。
 
 建立文件夾並在文件夾內執行 `go mod init github.com/your/repo` ([了解更多](https://go.dev/blog/using-go-modules)) 指令建立專案，然後使用 [`go get`](https://pkg.go.dev/cmd/go/#hdr-Add_dependencies_to_current_module_and_install_them) 指令下載 fiber :