Skip to content
/ BadgeBot Public

A drawbot script that created the badges for the Typographics conference.

Notifications You must be signed in to change notification settings

djrrb/BadgeBot

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

3 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

BadgeBot

The Typographics badges were made in less than a day using Drawbot, an excellent Python-based app for creating graphics. I automated them based on a static design by Nick Sherman. The design employs Stilla SH as well as a guest appearance by my in-progress typeface. This code is released under the MIT license.

Process

In case it is helpful in learning Drawbot, below is a breakdown of my process. This process was originally written as part of TypeLab, a multi-day hackathon for type and typography held during Typographics 2015.

animate

Draw the backgrounds

Draw a blue background measuring 4 by 3 inches.

def drawBackground(w, h):
	"""
	draw a rectangle that is a background
	"""
	fillColor(backgroundColor)
	rect(0, 0, w, h)
blue background

Draw a yellow box inside of it. Create jaggy edges by drawing a random number of points on each edge, and allowing the positions of those points to vary a certain amount within the space. No two jaggy-edged boxes are alike (compare the front and back of a name card to verify!)

def drawFrame(frameWidth, frameHeight, numberOfPointsMin=4, numberofPointsMax=6, perpindicularRandomness=2, parallelRandomness=10):
	"""
	make a box with random jagginess
	"""
	# for goodness sake make these variables shorter
	pdr = perpindicularRandomness
	plr = parallelRandomness
	# get the number of segments to use
	segments = random.randrange(numberOfPointsMin, numberofPointsMax)
	# draw the path, one direction at a time. Loop through the segment, and.
	# we have to subtract from segments so we don't hit the shared corners twice.
	fillColor(frameColor)
	newPath()
	moveTo((0, 0))
	for i in range(segments-1):
		lineTo( ( 0+random.randrange(-pdr, pdr) , (i+1)*frameHeight/segments + random.randrange(-plr, plr) ) )    
	lineTo((0, frameHeight))
	for i in range(segments-1):
		lineTo( ( (i+1)*frameWidth/segments + random.randrange(-plr, plr) , frameHeight+random.randrange(-pdr, pdr) ) )
	lineTo((frameWidth, frameHeight))
	for i in range(segments-2, 0, -1):
		lineTo( ( frameWidth+random.randrange(-pdr, pdr) , (i+1)*frameHeight/segments + random.randrange(-plr, plr) ) )
	lineTo((frameWidth, 0))
	for i in range(segments-2, 0, -1):
		lineTo( ( (i+1)*frameWidth/segments + random.randrange(-plr, plr) , 0+random.randrange(-pdr, pdr) ) )
	closePath()
	drawPath()
yellow box

Calculate the margins

Using preset margins, calculate the available space in the yellow box.

# set the outside margin to 1/18 of the width, which will surround the frame
outsideMargin = w/18
frameWidth = w-outsideMargin*2
frameHeight = h-outsideMargin*2

# set the box margins to 1/24 of the width, which will surround the box of text
topMargin = bottomMargin = leftMargin = rightMargin = w/24
boxWidth = frameWidth - leftMargin - rightMargin
boxHeight = frameHeight - topMargin - bottomMargin

# draw the background
if background:
    drawBackground(w, h)

# move ourselves to the frame margin, and draw the frame
translate(outsideMargin, outsideMargin)
drawFrame(frameWidth, frameHeight)
available space

If the participant has provided a company name, allot some available space for that at the bottom.

if company:
    drawCompany(company, companySize, frameWidth, companyHeight)
    boxHeight -= companyHeight
    bottomMargin += companyHeight
else:
    boxHeight -= companyHeight / 3
    bottomMargin += companyHeight / 3

Define a function that prints the company name.

def drawCompany(company, companySize, companyWidth, companyHeight):
	"""
	draw the company name, easy peasy.
	"""
	font(companyFont, companySize)
	fillColor(backgroundColor)
	textBox(company, (0, 0, companyWidth, companyHeight), align='center')

company name

Figure out the name

Ignore the badge layout for a moment and focus on the name. Split the name into lines, using spaces and hyphens as delimiters. Get rid of the spaces, but don’t get rid of the hyphens.

def getLinesFromName(name):
	"""
	Split a name string into a list of lines
	"""
	lines = name.split(' ')
	# Process hyphens without removing them. There has to be an easier way to do this, no?
	newLines = []
	for line in lines:
		if '-' in line:
			lineElements = line.split('-')
			for i, lineElement in enumerate(lineElements): 
				if i != len(lineElements)-1:
					newLines.append(lineElement+'-')
				else:
					newLines.append(lineElement)
		else:
			newLines.append(line)
	lines = newLines
	return lines

name split

For each line, calculate the font size that will let the word fill the available space. If the word is too short, set a maximum font size. Don’t draw this word yet...this is just a dress rehearsal. We need to figure out the dimensions of the whole text block before we can print anything. (code)

for i, line in enumerate(lines):
    # this is a little hack we did to words that end in 'f', because of the huge overhang in Stilla
    if line and line[-1] == 'f':
        line += '  '
    # get the font size at 10 point, and then do the math to figure out the multiplier
    font(nameFont)
    fontSize(10)
    lineHeight(6.5)
    textWidth, textHeight = textSize(line)
    m = boxWidth / textWidth
    # set a ceiling for the multiplier
    maximumMultiplier = 10
    if m > maximumMultiplier:
        m = maximumMultiplier            
    # resize the text box based on the multiplier to get the point size
    textWidth, textHeight = textWidth*m, textHeight*m
    pointSize = 10*m

calculations

Also, account for a given amount of space between each line. If the word has a descender, make a note that we should add a little more space beneath that line. Keep track of the height of the total text block that we are building.

    # look for descenders in a line
    hasDescender = False
    extraSpace = 0
    for letter in line:
        if letter in descenders:
            hasDescender = True
            break
    # if there is a descender, add a little extra space
    if hasDescender:
        extraSpace = pointSize * .175
        
    # remember our line data
    lineData.append((line, textWidth, textHeight, pointSize, extraSpace))
    
    # augment the total text count
    totalTextHeight += textHeight
    totalTextHeight += extraSpace
    # if we aren't on the last line, include the line space
    if i != len(lines)-1:
        totalTextHeight += lineSpace

descender

If the total text block is shorter than the available space, center it vertically in the available space.

scaleValue = 1
if boxHeight > totalTextHeight:
    # ideally, center the text box in the space
    verticalOffset = (boxHeight - totalTextHeight)/2
    translate(0, -verticalOffset)

tall name

On the other hand, if the total text block is taller than the available space, scale it down until it fits, and center it horizontally in the available space.

    # otherwise, scale the whole damn thing down so it fits in the space
    scaleValue = boxHeight / totalTextHeight
    diff = boxWidth - (scaleValue * boxWidth)
    translate(diff/2, 0)
    scale(scaleValue)

short name

Draw the name

Now, draw the text block. Draw each word of the name at the calculated font size, separated by the calculated line spacing.

# run through our line data
for i, (lineText, textWidth, textHeight, pointSize, extraSpace) in enumerate(lineData):
    fillColor(textColor)
    fontSize(pointSize)        
    translate(0, -textHeight)
    save()
    translate((boxWidth-textWidth)/2, 0)
    text(lineText, (0, 0))
    restore()
    translate(0, -lineSpace-extraSpace)

short name

Here is the badge-drawing function for a single badge:

def drawBadge(name, company=None, w=w, h=h, setSize=True, DEBUG=False):
	"""
	Draw one badge. This handles the positioning, and lets other functions do the drawing.
	"""

	save()

	if setSize:
		size(w, h)

	# set the outside margin to 1/18 of the width, which will surround the frame
	outsideMargin = w/18
	frameWidth = w-outsideMargin*2
	frameHeight = h-outsideMargin*2

	# set the box margins to 1/24 of the width, which will surround the box of text
	topMargin = bottomMargin = leftMargin = rightMargin = w/24
	boxWidth = frameWidth - leftMargin - rightMargin
	boxHeight = frameHeight - topMargin - bottomMargin

	# draw the background
	if background:
		drawBackground(w, h)

	# move ourselves to the frame margin, and draw the frame
	translate(outsideMargin, outsideMargin)
	drawFrame(frameWidth, frameHeight)

	# print the company name
	companyHeight = h / 7.5
	companySize = h / 18
	# if the company does exist, print that sucker, and then remove some available space
	# if the company doesn't exist, shift up our box a smidge anyway so it's a bit above center
	if company:
		drawCompany(company, companySize, frameWidth, companyHeight)
		boxHeight -= companyHeight
		bottomMargin += companyHeight
	else:
		boxHeight -= companyHeight / 3
		bottomMargin += companyHeight / 3
	
	# move ourselves to the bottom left of the remaining available space
	translate(leftMargin, bottomMargin)
	# draw the available space, in case we want to see it
	if DEBUG:
		fill(.8)
		rect(0, 0, boxWidth, boxHeight)

	# draw the name
	drawName(name, boxWidth, boxHeight)
	
	restore()

Prepare for printing

Read the names from a CSV file. Since our CSV file will have unicode values, use the included csvunicode module.

from csvunicode import UnicodeReader
def readDataFromCSV(csvPath):
	"""
	populate a list with rows from a csv file
	"""
	data = []
	with open(csvPath, 'r') as csvfile:
		csvreader = UnicodeReader(csvfile, delimiter=',', quotechar='"')
		for i, row in enumerate(csvreader):
			data.append(row)
	return data

For printing, make six to a page (or three two-sided sheets, to be folded over), along with some margins and crop marks.

def drawSheets(data, sheetWidth=8.5*pt, sheetHeight=11*pt, badgeWidth=w, badgeHeight=h, margin=.25*pt, multiple=2):
	"""
	Make a sheet of badges for printing purposes.
	"""

	# determine available space
	boxWidth = sheetWidth - margin * 2
	boxHeight = sheetHeight - margin * 2
	# determine number of columns and rows
	cols = int ( boxWidth / badgeWidth )
	rows = int ( boxHeight / badgeHeight )

	# reset the box space based on the badge size, rather than the page size
	boxWidth = cols * badgeWidth
	boxHeight = rows * badgeHeight

	#setup first page
	newPage(sheetWidth, sheetHeight)
	size(sheetWidth, sheetHeight)
	# fill the sheet with the background color, as a rudimentary bleed
	fillColor(backgroundColor)
	rect(0, 0, sheetWidth, sheetHeight)
	# move to the top left corner, which is where we will start
	translate(margin, sheetHeight-margin)
	# draw crop marks
	drawCropMarks(rows, cols, boxWidth, boxHeight, badgeWidth, badgeHeight, margin)
	# drop down to the bottom left corner to draw the badges
	translate(0, -badgeHeight)
	
	# loop through data
	rowTick = 0
	colTick = 0
	for i, (name, company) in enumerate(data):
		for m in range(multiple):
			# draw the badge without setting the page size
			drawBadge(name, company, setSize=False)
			translate(badgeWidth, 0)

			# if we have made it to the last column, translate back and start the next one
			if colTick == cols - 1:
				translate(-badgeWidth*cols, 0)
				translate(0, -badgeHeight)
				colTick = 0
			
				# if we have made it to the last row (and there is still more data), start a new page
				if rowTick == rows - 1 and i != len(data) - 1:
					# setup a new page
					newPage(sheetWidth, sheetHeight)
					# fill the sheet with the background color, as a rudimentary bleed
					fillColor(backgroundColor)
					rect(0, 0, sheetWidth, sheetHeight)
					# move to the top left corner, which is where we will start
					translate(margin, sheetHeight-margin)
					# draw crop marks
					drawCropMarks(rows, cols, boxWidth, boxHeight, badgeWidth, badgeHeight, margin)
					# drop down to the bottom left corner to draw the badges
					translate(0, -badgeHeight)
					rowTick = 0
				else:
					rowTick += 1
			else:
				colTick += 1

sheet

Export PDF

Use Drawbot to export a pdf, and that’s it!

saveImage('/path/to/stinkin_badges.pdf')

About

A drawbot script that created the badges for the Typographics conference.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages