Skip to content

AutoStep Testing Framework - Core Libraries and Components

License

Notifications You must be signed in to change notification settings

autostep/AutoStep

Repository files navigation

AutoStep

AutoStep is a new compiler and runner for Gherkin-style BDD tests, with some extra language features on top of standard Gherkin that add useful functionality. Unlike some existing BDD tools, there is no test code generation or separate code compilation process. The tests compile and execute directly inside AutoStep.

On top of the normal Gherkin test files, AutoStep provides a compiled language for defining how a user interface test might interact with your UI, to allow you to express your application's UI behaviour and components without writing code.

This repository contains the core .NET library that provides compilation and execution behaviour.

Contribution Guide and Code of Conduct.


Status

AutoStep is currently under development (in alpha). You can grab the CI package from our feedz.io package feed: https://f.feedz.io/autostep/ci/nuget/index.json. Get the 'develop' tagged pre-release package for latest develop.

At the moment the compiler (for test and interactions) and linker is mostly stable (but need a couple of extra features), and tests can be executed.

We're about to add our own results collector, at the moment you would have to add an event handler to do that. Shouldn't be too long though.

This library will soon be wrapped by both command-line and visual tooling to make writing and running tests a breeze!


Using It

As a basic introduction, here is a BDD test I want to execute in AutoStep:

Feature: My Feature 

  Scenario: My Scenario
    
    # This will run my defined step below, twice!
    Given I have added an order for 100.0
      And I have added an order for 200.0

    Then I should have 2 orders

# You can define steps inside your test files
Step: Given I have added an order for {arg}

    Given I have entered <arg> into 'Order Value'
    
    When I click 'Submit'

    Then the 'Order Success' page should be displayed

In order to run this test, I can use the following C# code:

  // Create a project
  var project = new Project();

  // Define some steps based on callbacks.
  // You can actually define anything as a source of steps if you
  // want to!
  var steps = new CallbackDefinitionSource();

  // You can put arguments in curly braces:
  steps.Given("I have entered {value} into {field}", (string val, string field) =>
  {
      // Run the selenium/manipulation code as needed
  });

  // You can inject a DI scope and resolve services:
  steps.When("I click {button}", (IServiceProvider scope, string buttonName) =>
  {
      // Click the button
  });

  // Step methods can be async:
  steps.Then("the {title} page should be displayed", async (string title) =>
  {
      // Check for the title page
  });

  // You can do type hinting.
  // Test compilation will give an error if someone tries to pass a string as count.
  steps.Then("I should have {count:int} orders", (IServiceProvider scope, int count) =>
  {
  });

  // Add your source to the project compiler.
  project.Compiler.AddStepDefinitionSource(steps);

  // Add a file (specifying the name, and where to get it).
  var file = new ProjectTestFile("/testfile.as", new PhysicalFileSource("/testfile.as", "C:\\testfile.as"));

  // Add your file to the project (you can have as many files as you like)
  // Steps defined in one project file can be used in any other.
  project.TryAddFile(file);

  // Compile the project (will return any errors).
  // After compilation, file.LastCompilationResult will be set.
  await project.Compiler.CompileAsync();

  // Link the project.
  // After linking, file.LastLinkResult will be set.
  project.Compiler.Link();

  // Create a test run.
  var testRun = project.CreateTestRun();

  // The test will run:
  await testRun.ExecuteAsync();

Why AutoStep

Why does AutoStep exist? The team behind AutoStep has spent years testing enterprise-level web applications using the existing Gherkin technologies (mostly SpecFlow) and while we are a big fan of these, we've also identified a couple of things we'd like to add. Here are a few of the useful features in AutoStep that help us with that.

Defining Steps in the same Language as the Tests

People often end up writing automated web tests that look like this:

Scenario: Shipping an Order Increments the User Shipped Count

    Given I have clicked on the 'Orders' menu item
      And I have entered 100 into the 'Order Value' field
      And I have clicked 'Place Order'
      And I have clicked 'Confirm'

    Given I have clicked on the 'Shipping' menu item
      And I have selected the order for 100
      And I have pressed 'Ship'
      And I have pressed 'Confirm'

    Then the user's shipped count should be 1

This isn't strictly great BDD, because you're putting a lot of detail into the test itself about how to actually place an order, which makes it harder to simply describe what actual behaviour is being tested (in this example, that the shipped count has been incremented).

So we want to resolve this by hiding the 'implementation details' of the test behind another step:

Scenario: Shipping an Order Increments the User Shipped Count

    Given I have placed an order for 100
      And I have shipped an order for 100

    Then the user's shipped count should be 1

That's much more readable, but where has that behaviour gone? In most existing gherkin implementations, that behaviour is now in Javascript, or C#, of whatever your binding language is.

We've found that it's not really ideal to completely hide the detail of a behaviour in the code that the steps bind to. It's pretty common for the person reading the test to both:

  • Want to find out the implementation is doing at a fine-grained level
  • Not be a developer.

To this end, AutoStep allows you to define steps in the same language as the tests, either in the same file or in a separate file shared with all the tests in your project:

Step: Given I have placed an order for {value:float}
   This step will place an order for the specified value.
    
    Given I have clicked on the 'Orders' menu item
      And I have entered <value> into the 'Order Value' field
      And I have clicked 'Place Order'
      And I have clicked 'Confirm'

Step: Given I have shipped an order for {value:float}
    This step ships the order with the specified value.

    Given I have clicked on the 'Shipping' menu item
      And I have selected the order for <value>
      And I have pressed 'Ship'
      And I have pressed 'Confirm'

Step definitions can have descriptions, just like scenarios. Descriptions act like documentation for the step.

You can nest the references too, so we could wrap both of those again:

Step: Given I have placed and shipped an order for {value:float}

    Given I have placed an order for <value>
      And I have shipped an order for <value>

# Use the new single step
Scenario: Shipping an Order Increments the User Shipped Count

    Given I have placed and shipped an order for 100

    Then the user's shipped count should be 1

AutoStep Interactions - Testing User Interfaces

A lot of people are now using BDD tools, combined with Selenium, to perform BDD User Interface Tests.

This can require quite a lot of up-front work to integrate Selenium, and write the necessary code to tell your tests what a button is, or a menu, or any other custom component. This code is then potentially brittle if not managed properly, or if there is no developer to maintain it.

In the section above, we talked about defining steps in the AutoStep language, and we want to extend that to UI manipulation steps, adding language support for telling AutoStep how to interact with a UI, using the AutoStep Interaction language.

Components and Traits

From our perspective, most user interfaces are made up of various 'components'. For example, a button, an input field, a menu, a grid, etc. So, let's define a file that describes our components:

Component: button

Component: field

Component: menu

Every component has 'traits'. A trait is any behaviour or classification for a component. Some traits might be:

  • named: A name can be used to locate this component. Perhaps by a label, or the text in a button.
  • clickable: An element can be clicked on.
  • editable: An element can be typed into.
  • draggable: An element can be dragged.

Most components can be described as having traits; buttons are named and clickable, fields are named and editable, etc.

We can indicate the traits a component has like so:

Component: button

  traits: named, clickable

Component: field

  traits: named, editable

In the AutoStep world, a trait can imply test steps, and 'methods'. Here's how we define a couple of traits, and apply them to a component:

Trait: named

  # This is a method definition.
  # Any component that has the 'named' trait must say how to find it.
  locateNamed(name): needs-defining

# Any component that is both clickable and named will have this combined trait
# applied to it.
Trait: clickable + named

  # This step will be applied to every component that has this trait applied
  # The $component$ is a dynamic placeholder that will bind on the component name.
  #
  # When a step is invoked, it executes a set of methods (in order). 
  # These methods might be defined in code, or defined in a trait.
  # The method that is used will be the one specific to a given component.
  Step: When I click the {name} $component$
    locateNamed(name)
    -> click()
  
Component: button

  traits: clickable, named

  # select is an example of a method that might be exposed
  # by an integration library (in C#)
  locateNamed(name): select('input[name=<name>]')

The behaviour above means we can now use the step in our test:

# Submit matches the {name} argument
# button matches the $component$ placeholder.
When I click the Submit button

Components can be inherited from another (or the same) component.

This allows you to define 'general' behaviour, and custom overrides.

For example, let's say I want to define a 'Clear' button that behaves differently.

Component: clear-button

  # Specifying an exact name changes the binding text in steps, which can have whitespace.
  name: 'clear button'

  inherits: 'button'

  # Override the locateNamed method from 'button' to be more specific
  locateNamed(name): select('input.clear[name=<name>]')

Web Testing Support

The AutoStep Interactions language is not targeted at a specific UI system. It's intended that people can build/contribute built-in methods for a variety of UI platforms (e.g. WinForms, WPF, Mobile, etc).

That being said, our experience is around web application testing, so we will be creating a set of Web Bindings for AutoStep interactions that should allow tests to be created for the web without needing to build an integration package in C#.

You can find that package at https://github.com/autostep/AutoStep.Web (which is a work in progress).

No Visual Studio/MSBuild Dependency

One of the frustrations we've had in the past is that the writing and building of tests requires a development environment, such as Visual Studio, or Visual Studio Code. In addition, tests must be 'built'.

Not all the people we want to be able to write AutoStep tests are developers, or even have a license for Visual Studio.

AutoStep does not generate code for another test system (NUnit, JUnit, XUnit, etc) and does not depend on any existing testing framework. Tests are compiled and executed completely by AutoStep, with no other execution dependencies. This means we don't need any build system other than our own!

AutoStep 1.0 will ship with its own mini-IDE designed for writing BDD tests, that removes a lot of the complexity of using Visual Studio or similar IDEs, making the experience much more straightforward for test writers/readers.

Eventually we are going to add support for writing tests in the popular IDEs, but our priority is getting people who don't already use one writing tests first.

Tags vs Options

When we have built our tests in Gherkin in the past, and we want to add some automatic functionality to a test (for example, spinning up a database), we have ended up horribly mis-using tags to achieve this:

@fresh-database-per-scenario
@use-db-backup:customer-setup
@orders
Feature: Customer Orders

  Scenario: Enter an Order
  

In this test, we want to tell our before-feature handlers what options we want to use for the feature; but this is now mixed in with the actual tags for the Feature, that is how we group, find and report on tests.

So, in AutoStep, we differentiate tags from options, by having a different character to indicate options:

$fresh-database-per-scenario
$use-db-backup:customer-setup
@orders
Feature: Customer Orders

  Scenario: Enter an Order
  

Sourcing Steps from Anywhere

While AutoStep will support the standard notation of binding functionality to methods in classes people write, we also believe that a step definition should be able to come from almost anywhere.

For example, we want to create steps automatically from control configuration, or application options, without having to write the step bindings.

Architecture

AutoStep is built in .NET, targeting .netstandard21 for all libraries, and netcoreapp31 for all applications.

It uses the Antlr parser generator to parse the AutoStep language.

About

AutoStep Testing Framework - Core Libraries and Components

Resources

License

Code of conduct

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages