Bump pypa/cibuildwheel from 2.17.0 to 2.18.0

[dependabot]

Bumps pypa/cibuildwheel from 2.17.0 to 2.18.0.

Release notes

Sourced from pypa/cibuildwheel's releases.

v2.18.0

• ✨ Adds CPython 3.13 support, under the prerelease flag CIBW_PRERELEASE_PYTHONS. This version of cibuildwheel uses 3.13.0b1. Free-threading mode is not available yet, waiting on official binaries (planned for beta 2) and pip support. While CPython is in beta, the ABI can change, so your wheels might not be compatible with the final release. For this reason, we don't recommend distributing wheels until RC1, at which point 3.13 will be available in cibuildwheel without the flag. (#1816)
• ✨ Musllinux now defaults to musllinux_1_2. You can set the older musllinux_1_1 via config if needed. (#1817)
• 🛠 No longer pre-seed setuptools/wheel in virtual environments (#1819)
• 🛠 Respect the constraints file when building with pip, matching build (#1818)
• 🛠 Use uv to compile our pinned dependencies, 10x faster and doesn't require special setup (#1778)
• 🐛 Fix an issue with the schema (#1788)
• 📚 Document the new delocate error checking macOS versions (#1766)
• 📚 Document Rust builds (#1816)
• 📚 Speed up our readthedocs builds with uv, 26 seconds -> 6 seconds to install dependencies (#1816)

Changelog

Sourced from pypa/cibuildwheel's changelog.

v2.18.0

12 May 2024

• ✨ Adds CPython 3.13 support, under the prerelease flag CIBW_PRERELEASE_PYTHONS. This version of cibuildwheel uses 3.13.0b1. Free-threading mode is not available yet, waiting on official binaries (planned for beta 2) and pip support.

  While CPython is in beta, the ABI can change, so your wheels might not be compatible with the final release. For this reason, we don't recommend distributing wheels until RC1, at which point 3.13 will be available in cibuildwheel without the flag. (#1816)

• ✨ Musllinux now defaults to musllinux_1_2. You can set the older manylinux_1_1 via config if needed. (#1817)

• 🛠 No longer pre-seed setuptools/wheel in virtual environments (#1819)

• 🛠 Respect the constraints file when building with pip, matching build (#1818)

• 🛠 Use uv to compile our pinned dependencies, 10x faster and doesn't require special setup (#1778)

• 🐛 Fix an issue with the schema (#1788)

• 📚 Document the new delocate error checking macOS versions (#1766)

• 📚 Document Rust builds (#1816)

• 📚 Speed up our readthedocs builds with uv, 26 seconds -> 6 seconds to install dependencies (#1816)

Commits

• 711a3d0 Bump version: v2.18.0
• 3873a1e chore: update bump_version script
• 6dd4f15 docs: rust (#1816)
• 44c4742 feat: add Python 3.13 beta 1 (#1815)
• c021744 feat: move default musllinux build to musllinux_1_2 (#1817)
• cf18014 fix: do not pre-seed setuptools / wheel in virtual environment (#1819)
• 3ea0a6c fix: respect constraints when building with pip (#1818)
• 30a0dec [Bot] Update dependencies (#1812)
• 988d512 [pre-commit.ci] pre-commit autoupdate (#1813)
• 98d57d9 Merge pull request #1766 from Czaki/delocate_info
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

[codecov]

Codecov Report

All modified and coverable lines are covered by tests ✅

Project coverage is 97.45%. Comparing base (64f02b1) to head (8bb4167).

Additional details and impacted files

@@            Coverage Diff             @@
##             3.10    #8411      +/-   ##
==========================================
- Coverage   97.51%   97.45%   -0.07%     
==========================================
  Files         108      108              
  Lines       33285    33285              
  Branches     3997     3997              
==========================================
- Hits        32459    32437      -22     
- Misses        602      620      +18     
- Partials      224      228       +4     

Flag	Coverage Δ
CI-GHA	97.37% <ø> (-0.06%)	⬇️
OS-Linux	97.04% <ø> (-0.06%)	⬇️
OS-Windows	94.70% <ø> (ø)
OS-macOS	96.76% <ø> (ø)
Py-3.10.11	96.87% <ø> (+<0.01%)	⬆️
Py-3.10.14	96.84% <ø> (ø)
Py-3.11.9	97.06% <ø> (-0.01%)	⬇️
Py-3.12.3	97.17% <ø> (-0.01%)	⬇️
Py-3.8.10	94.44% <ø> (ø)
Py-3.8.18	96.73% <ø> (ø)
Py-3.9.13	96.86% <ø> (-0.01%)	⬇️
Py-3.9.19	96.84% <ø> (ø)
Py-pypy7.3.15	?
VM-macos	96.76% <ø> (ø)
VM-ubuntu	97.04% <ø> (-0.06%)	⬇️
VM-windows	94.70% <ø> (ø)

Flags with carried forward coverage won't be shown. Click here to find out more.

☔ View full report in Codecov by Sentry.
📢 Have feedback on the report? Share it here.