Skip to content
/ Kit-CSRF Public

Secure and simple CSRF library protected against timing and BREACH attacks

License

Notifications You must be signed in to change notification settings

Riimu/Kit-CSRF

Repository files navigation

Secure CSRF validator

CSRF is a PHP library for preventing [Cross-Site Request Forgery] (https://www.owasp.org/index.php/Cross-Site_Request_Forgery_%28CSRF%29) attacks. A CSRF attack takes advantage of authenticated users by sending them to a malicious website that sends carefully crafted requests to the targeted website in order to modify content on that website. The attack uses the authenticated user's browser to send the request to bypass any authentication. This library prevents these attacks by requiring a CSRF token in each POST, PUT and DELETE request. These tokens are not known by the attacker, which prevents them from sending malicious requests.

This library supports storing the CSRF tokens using either cookies or sessions. The token can also be submitted using either a hidden form field in POST requests or using a HTTP header, which makes it easier to pass the token in ajax requests.

In order to provide additional security against different forms of attacks against the CSRF tokens, this library uses constant time string comparisons to prevent timing attacks and generates random encrypted tokens in each request to prevent BREACH attacks. On top of that, all tokens are generated using a secure random byte generator.

The API documentation, which can be generated using Apigen, can be read online at: http://kit.riimu.net/api/csrf/

Build Status Code Coverage Scrutinizer Code Quality

Requirements

In order to use this library, the following requirements must be met:

Installation

This library can be installed by using Composer. In order to do this, you must download the latest Composer version and run the require command to add this library as a dependency to your project. The easiest way to complete these two tasks is to run the following two commands in your terminal:

php -r "readfile('https://getcomposer.org/installer');" | php
php composer.phar require "riimu/kit-csrf:2.*"

If you already have Composer installed on your system and you know how to use it, you can also install this library by adding it as a dependency to your composer.json file and running the composer install command. Here is an example of what your composer.json file could look like:

{
    "require": {
        "riimu/kit-csrf": "2.*"
    }
}

After installing this library via Composer, you can load the library by including the vendor/autoload.php file that was generated by Composer during the installation.

Manual installation

You can also install this library manually without using Composer. In order to do this, you must download the latest release and extract the src folder from the archive to your project folder. To load the library, you can simply include the src/autoload.php file that was provided in the archive.

Note that if you install this library manually, you must also install the dependencies by yourself. Installing the library via Composer also installs the dependencies for you.

Usage

The idea of this library is to make security as convenient as possible. You only really need two methods provided by the CSRFHandler class. The method validateRequest() should be called at the very beginning of each request. This method will only validate POST, PUT and DELETE requests so you can safely call it on every request. The method getToken() can be used to retrieve the token that should be included in each submitted form using a hidden field named csrf_token.

If the submitted token does not match against the secret token stored in the cookie or session, the validateRequest() method will send a HTTP 400 (bad request) header and kill the script execution. This should not affect the normal usage of your website, but it will prevent any CSRF attack attempts against your website.

As an example, here is a simple web page that has one form that can be submitted:

<?php

require 'vendor/autoload.php';
$csrf = new \Riimu\Kit\CSRF\CSRFHandler();
$csrf->validateRequest();
$token = $csrf->getToken();

?>
<!DOCTYPE html>
<html>
 <head>
  <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
  <title>Simple Form</title>
 </head>
 <body>
<?php

if (!empty($_POST['my_name'])) {
    printf("  <p>Hello <strong>%s</strong>!</p>" . PHP_EOL, htmlspecialchars($_POST['my_name'], ENT_QUOTES | ENT_HTML5, 'UTF-8'));
}

?>
  <form method="post"><div>
   <input type="hidden" name="csrf_token" value="<?=htmlspecialchars($token, ENT_QUOTES | ENT_HTML5, 'UTF-8')?>" />
   What is your name?
   <input type="text" name="my_name" />
   <input type="submit" />
  </div></form>
 </body>
</html>

Using Sessions

By default, the library will save the secret token to a cookie. If you prefer to save the token to a session instead, you can initialize the CSRFHandler by setting the constructor parameter to false. For example:

<?php

session_start();
require 'vendor/autoload.php';
$csrf = new \Riimu\Kit\CSRF\CSRFHandler(false);

Handling Invalid Tokens

If you wish to have more control over what happens when the request sends an invalid csrf token, you can set the parameter passed to validateRequest() to true. This will cause the method to throw an InvalidCSRFTokenException instead of killing the script. For example:

<?php

require 'vendor/autoload.php';
$csrf = new \Riimu\Kit\CSRF\CSRFHandler();

try {
    $csrf->validateRequest(true);
} catch (\Riimu\Kit\CSRF\InvalidCSRFTokenException $ex) {
    header('HTTP/1.0 400 Bad Request');
    exit('Bad CSRF Token!');
}

Using Token Headers

Note that if you are building a REST api to your website or you are using ajax requests to send POST, PUT or DELETE requests, you may also provide the csrf token using a header.

To provide the token using a header, simply include a header named X-CSRF-Token which contains the same value you would include in the csrf_token form field.

Using nonces

A nonce is a token that can be used only once. Turning CSRF tokens into nonces provides protection against Replay Attacks. It is important to note, however, that the best defense against such attacks is using a secure HTTPS connection. However, if you do not have the luxury of an encrypted connection at your disposal, it may be possible to [use nonces] (http://blog.ircmaxell.com/2013/02/preventing-csrf-attacks.html) to prevent these attacks.

This library provides a way to implement nonces by using the NonceValidator class. This class works exactly the same as CSRFHandler except that it accepts each token generated by getToken() only once. Even if the attacker can spy on the connection, they cannot resend the http request because the token only works once.

You can use the NonceValidator the same way as you would use the CSRFHandler, for example:

<?php

require 'vendor/autoload.php';

session_start();
$csrf = new \Riimu\Kit\CSRF\NonceValidator();
$csrf->validateRequest();
$token = $csrf->getToken();

Note that NonceValidator always uses sessions to store the CSRF token. In addition to that, it will also store which tokens have been used up and cannot be used again. If you have a website that relies on a large number of form submissions, this array of invalidated tokens can grow quite large. To clear this array, simply regenerate the token using regenerateToken(). For example:

<?php

require 'vendor/autoload.php';

session_start();
$csrf = new \Riimu\Kit\CSRF\NonceValidator();
$csrf->validateRequest();

if ($csrf->getNonceCount() > 100) {
    $csrf->regenerateToken();
}

$token = $csrf->getToken();

Manual Usage

If you wish to have more control over the token validation, this library provides several methods that allows you to manually manage several aspects of the library. For your convenience, the CSRFHandler provides the following methods:

  • isValidatedRequest() tells if the current request is a POST, PUT or DELETE request which should be validated.

  • validateRequest($throw = false) validates the request and kills the script or throws an exception if the token is invalid. The token is only validated on POST, PUT and DELETE requests.

  • validateRequestToken() validates the token sent in the request. True is returned if the token exists and it matches against the secret token.

  • validateToken($token) can be used to validate tokens manually. The token passed to the method should be the one that has been returned by getToken()

  • getToken() returns a valid base64 encoded token.

  • regenerateToken() regenerates the secret CSRF token and invalidates all the tokens returned previously by getToken()

  • getTrueToken() returns the stored secret CSRF token that is used to validate the tokens submitted by the user.

  • getRequestToken() returns the token sent in the request.

Securing Your Website

Even this library does not prevent CSRF attacks if you fail to utilize the tokens correctly. It is very important that each request is properly validated and that the token is sent with each submitted form. However, there are still couple of pitfalls that you should be aware of.

If you're not using nonces, in some rare cases it may also be possible to use [Session Fixation] (https://www.owasp.org/index.php/Session_fixation) attack to determine the CSRF token used by the authenticated user. Even if the session ID is regenerated upon login, the attacker may still take advantage of the known CSRF token. To prevent this, it is simply advisable to regenerate the token upon authentication by calling regenerateToken().

In order to create a website that is impervious to CSRF attacks, you must also remember that only POST, PUT and DELETE requests should change the state of the website. A CSRF token should be never be supplied in a GET parameter, because this can be leaked using various different attacks. Thus, GET requests should never affect the state. For example, allowing users to be deleted using a simple GET request would make your website vulnerable to CSRF attacks.

If you truly want to create a secure site, however, you must also only use encrypted connections, i.e. you must use HTTPS. This is the only effective measure against Man-in-the-middle attacks, but it also helps in preventing replay attacks.

Finally, remember that CSRF tokens only protect you from external requests. They offer no protection against Cross-site Scripting attacks. If the attacker is capable of running javascript on your website, the CSRF tokens offer no additional protection. Using a XSS attack, the attacker is always capable of finding out the CSRF token. The security of your website only as strong as the weakest link.

Anatomy of the CSRF tokens

All the tokens generated by this library are random 32 byte strings. These strings have been generated by using the SecureRandom library in order to ensure that they have been generated using a secure random source. However, the tokens returned by getToken() are more than double that in length. This is because they are base64 encoded strings that also contain a hashed version of the token using the secret token as a salt.

In order to prevent BREACH attacks, each token returned by getToken() is different, because a static token can be used to break the encryption used by a HTTPS connection. In order to achieve this, the returned token actually consists of a random generated token and an encrypted version of that token that has been encrypted using HMAC-SHA256 using the secret token as the key. (which also makes it infeasible to reverse the operation to find out the secret token). This allows each token to be different, but still valid until regenerateToken() is called. Thus, the actual length of the returned decoded string is 64 bytes.

Note that a new random token is generated every time getToken() is called. Thus, each string returned by that method is different. If you have a large number of forms on your web page, it may be more efficient to use SingleToken class, which loads the token only once and it can be casted to a string.

Credits

This library is copyright 2014 - 2015 to Riikka Kalliomäki.

See LICENSE for license and copying information.

Implementation of this library is based on ideas from Go library nosurf by Justinas Stankevicius

About

Secure and simple CSRF library protected against timing and BREACH attacks

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages