Skip to content

Yocto Explorer: is a command line tool to ease the manipulation of files under the directory structure adopted by O.S. Systems to organize projects that use the Yocto Project

License

Notifications You must be signed in to change notification settings

OSSystemsEmbeddedLinux/ye

Repository files navigation

ye (Yocto Explorer)

Introduction

ye is a command line tool to ease the manipulation of files under the directory structure adopted by O.S. Systems to organize projects that use the Yocto Project. ye provides means to quickly locate files and directories into projects' directory tree, and act on them.

The directory layout assumed by ye

The infrastructure adopted by O.S. Systems assumes the following directory layout:

<project>
    .repo
    <build dir>
    setup-environment
    sources

<project> is the root directory of the project you’ll be working on. In it you’ll initially find a setup-environment script, which is supposed to be source’d to set up the environment and will create <build dir>, and a sources directory, under which the source code of all projects (git repositories) will be stored.

The directory layout in the <build dir> directory follows the standard layout as determined by the Yocto Project.

Notes on arguments, environment and interactive behavior

Most ye commands accept a regular expression as argument. Thus, it’s possible that it will obtain multiple results. In this case, if ye's output is attached to a terminal (i.e., not a pipe or a file), it will run interactively, prompting users for a specific result.

When running interactively, ye will paginate the output in case it doesn’t fit the terminal window and will highlight matches in red on the output.

Some commands expect the BUILDDIR environment variable to be set in the environment (because they have to run bitbake behind the scenes to find out things). This variable is automatically set by the setup-environment script provided by O.S. Systems for Yocto Project-based projects.

Using ye

This section will show in detail how to use ye. The help message displayed by ye when invoked with the --help option can be seen below. The next subsections provide more detailed information about each command.

$ ye -h
Usage: ye <command> [ <options> ]

f [-e] <regex>
find [-e] <regex>
    Locate paths (in the "sources" directory) that match the given
    expression <regex>.  <regex> is case insensitive and implicitly
    surrounded by '.*'.  -e disables the implicit use of '.*' around
    the given <regex>.  Note that, unless <regex> contains /, matching
    is attempted on filenames only (not on dirnames).  If <regex>
    contains /, matching is attempted on the full path.

v [-e] <regex>
view [-e] <regex>
    Shortcut to find & view.  If multiple files are found, a prompt for
    files will be displayed (but not for actions).

e [-e] <regex>
edit [-e] <regex>
    Shortcut to find & edit.  If multiple files are found, a prompt for
    files will be displayed (but not for actions).

sf [-e] <regex>
sysroot-find [-e] <regex>
    Locate paths (in the "sysroots" directory) that match the given
    expression <regex>.  <regex> is case insensitive and implicitly
    surrounded by '.*'.  -e disables the implicit use of '.*' around
    the given <regex>.  Note that, unless <regex> contains /, matching
    is attempted on filenames only (not on dirnames).  If <regex>
    contains /, matching is attempted on the full path.

wsf [-e] <regex>
work-shared-find [-e] <regex>
    Similar to sysroot-find, but instead of searching in the sysroots
    directories, search in the work-shared directory.

pf [-e] <regex>
pkg-find [-e] <regex>
    Like 'find', but for packages.

pv [-e] <regex>
pkg-view [-e] <regex>
    Shortcut to pkg-find & view.  If multiple packages are found, a
    prompt for packages will be displayed (but not for actions).

pi [-e] <regex>
pkg-info [-e] <regex>
    Shortcut to pkg-find & info.  If multiple packages are found, a
    prompt for packages will be displayed (but not for actions).

ps [-e] <regex>
pkg-scripts [-e] <regex>
    List scripts for package that matches <regex>.  In case of multiple
    matches, ye will prompt for a specific package. <regex> is case
    insensitive and implicitly surrounded by '.*'.  -e disables the
    implicit use of '.*' around the given <regex>.

px [-e] [-c] <regex> [<file>]
pkg-extract [-e] [-c] <regex> [<file>]
    Extract package that matches <regex>.  In case of multiple matches,
    ye will prompt for a specific package. <regex> is case insensitive
    and implicitly surrounded by '.*'.  -e disables the implicit use
    of '.*' around the given <regex>.
    If <file> is provided, ye will extract <file> only, otherwise the
    whole package content will be extracted to a directory named after
    the package filename (without extension).  <file> must match the exact
    file name in the package (usually starts with ./).
    -c is specific to .deb and .ipk packages -- ye will extract files
    from the control.tar.gz tarball in packages.

wd [-e] <regex>
workdir [-e] <regex>
    Locate the Yocto Project's workdir for <regex>.  <regex> is
    implicitly surrounded by '.*', unless -e is provided.

l [-e] [-H] [-R] <recipe pattern> [<log pattern>]
log [-e] [-H] <recipe pattern> [<log pattern>]
    Show the log files for <recipe>.  -e is only applied to
    <recipe pattern>.  <log pattern> is always implicitly surrounded
    by '.*', if provided.  If -H ("human readable") is given on the
    command line, ye will try to make the lines that contain calls
    to gcc/g++ look more readable.  If -R is provided, ye will apply
    some text replacements to make the output more readable.  Currently,
    ye reverse expands some common variables whose expansion pollutes
    log files with long paths.  The following variables are reverse
    expanded:
      * $B
      * $S
      * $WORKDIR
      * $TMPDIR
      * $HOME

r [-e] <recipe pattern> [<run script pattern>]
run [-e] <recipe pattern> [<run script pattern>]
    Show the log files for <recipe>.  -e is only applied to
    <recipe pattern>.  <run script pattern> is always implicitly
    surrounded by '.*', if provided.

g <args>
grep <args>
    Run 'repo grep <args>'.

sg <args>
sysroot-grep <args>
   Run 'grep -r <args> $BUILDDIR/tmp/sysroots/$MACHINE'.

glg [-n <num commits>] [-i] <regex>
git-log-grep [-n <num commits>] [-i] <regex>
   Run "git log -n <num commits> --oneline | grep <regex>" on all the
   repositories and prompt the user for the commit to show.
   If -n is not provided, 1000 will be used.  If -i is provided, search
   will be case insensitive.

gbh [<args>] <regex>
grep-buildhistory [<args>] <regex>
   Run "git grep [<args>] <regex>" in the buildhistory directory.

bh [-d] <revisions back>
buildhistory [-d] <revisions back>
    Show changes in buildhistory <revisions back> (a positive integer).
    If -d is given, show the raw git diff output.

d [-e] <regex>
doc [-e] <regex>
    Search variable names in the reference manual that match the given
    expression <regex> and show the documentation for the selected
    match.  <regex> is case insensitive and implicitly surrounded by
    '.*'.  -e disables the implicit use of '.*' around the given
    <regex>.

x <recipe> <variable>
expand <recipe> <variable>
    Expand BitBake's variable <variable> in the context of <recipe> and
    show the final value and the recursive expansion of all variables
    and expressions involved.

cd [<dir shortcut>]
    Change to <dir shortcut>.  The following <dir shortcut> options are
    available:

    top
        Change to project's TOPDIR

    wd [<recipe>]
        Change to <recipe>'s WORKDIR or to BUILDDIR/tmp/deploy/work if
        <recipe> is not provided

    bd
        Change to BUILDDIR

    bh
        Change to the buildhistory directory

    sd
        Change to the sysroot directory for MACHINE

    src [<recipe>]
        Change to <recipes>'s source dir or to TOPDIR/sources
        if <recipe> is not provided

    img
        Change to BUILDDIR/tmp/deploy/MACHINE/image/

    pkg
        Change to BUILDDIR/tmp/deploy/PKG_TYPE/image/

    manifest
        Change to TOPDIR/.repo/manifests

    When called without arguments, ye cd will change to BUILDDIR.

    To use this feature, source'ing the ye-cd shell helper is required.

Finding and operating on files

ye provides commands to locate files and operate on them. Some commands are specific to some directories and some are specific to some file types (e.g., packages). The following sections provide a more in-depth explanation about them.

Finding and operating on files in the sources directory

The find command (short: f) can be used to locate files under the sources directory. It’s argument is a regular expression that will be matched against pathnames. If the given regex contains /, matching is attempted on filenames only (not on dirnames). If the given regex contains /, matching is attempted on the full path.

After locating files that match the given pattern, ye will prompt you to select one of the matches and, next, what to do with it. In case the standard output is not a terminal (e.g., a file or a pipe), interactive commands will just print the results to the standard output (no prompt for action will be displayed).

Example:

$ ye f flex
[0] ~/yocto/sources/poky/meta/recipes-devtools/flex/flex.inc [0]
[1] ~/yocto/sources/poky/meta/recipes-devtools/flex/flex_2.5.35.bb [1]
Option (ENTER to cancel): 1
[v] View
[e] Edit
Option (ENTER to cancel): v
     1  require flex.inc
     2  PR = "r3"
     3  LICENSE="BSD"
     4  LIC_FILES_CHKSUM = "file://COPYING;md5=e4742cf92e89040b39486a6219b68067"
     5  BBCLASSEXTEND = "native nativesdk"
     6
     7  SRC_URI += "file://avoid-FORTIFY-warnings.patch \
     8              file://int-is-not-the-same-size-as-size_t.patch"
     9
    10  SRC_URI[md5sum] = "10714e50cea54dc7a227e3eddcd44d57"
    11  SRC_URI[sha256sum] = "0becbd4b2b36b99c67f8c22ab98f7f80c9860aec70..."
Note
ye also allows you to use shortcuts for selecting options and actions at the same prompt. In the example above, we typed 0 ENTER to select flex.inc, then 0 ENTER to select the View action. The shortcut would be 0v ENTER in the file selection prompt. For Edit, the shortcut would be 0e ENTER.

For cases you know in advance what to do with files (i.e., view or edit), ye provides commands to allow you to specify the action on the command line, so it won’t prompt you for the action. Those commands are view (short: v) and edit (short: e). They are basically shortcuts to findview and findedit.

The view and edit commands can be quite handy when you have a part of the full path to a file. Here’s an example use-case: you want to understand how the qemuarm machine configuration is built. You start by looking at the content of qemuarm.conf:

$ ye v qemuarm.conf
~/src/yocto/sources/poky/meta/conf/machine/qemuarm.conf
      1 #@TYPE: Machine
      2 #@NAME: arm_versatile_926ejs
      3 #@DESCRIPTION: arm_versatile_926ejs
      4
      5 require conf/machine/include/qemu.inc
      6 require conf/machine/include/tune-arm926ejs.inc
      7 #require conf/machine/include/tune-arm1136jf-s.inc
      8
      9 KERNEL_IMAGETYPE = "zImage"
     10
     11 SERIAL_CONSOLE = "115200 ttyAMA0"
     12
/home/mario/src/yocto/sources/poky/meta/conf/machine/qemuarm.conf

You see qemuarm.conf includes conf/machine/include/qemu.inc. Since you may not know what layer ships conf/machine/include/qemu.inc, to see its contents you first would have to locate it, then you’d need to call a viewer passing as argument the path to the file you found. With ye, you can just give it the partial path referenced in qemuarm.conf:

$ ye v conf/machine/include/qemu.inc
~/src/yocto/sources/poky/meta/conf/machine/include/qemu.inc
      1 PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg"
      2 PREFERRED_PROVIDER_virtual/egl ?= "mesa"
      3 PREFERRED_PROVIDER_virtual/libgl ?= "mesa"
      4 PREFERRED_PROVIDER_virtual/libgles1 ?= "mesa"
      5 PREFERRED_PROVIDER_virtual/libgles2 ?= "mesa"
      6
      7 XSERVER ?= "xserver-xorg \
      ...

ye will locate and display the file in a single step. If it finds multiple results for conf/machine/include/qemu.inc it’ll prompt you for the one you really want to see.

Finding and displaying files in the sysroots directories

The sysroot-find (short: sf) command is pretty much equivalent to the find command, except it locates files under the sysroots directory (<build dir>/tmp/sysroots).

Finding and displaying files in the work-shared directory

The work-shared-find (short: wsf) command is similar to the sysroot-find command, but instead of searching in the sysroots directories, it searches in the work-shared directory.

Finding and operating on files in the deploy directory (for packages)

The pkg-find (short: pf) command is equivalent to the find command, except it locates files under the deploy directory for packages (<build dir>/tmp/deploy/<package type>). ye supports the most common package formats generated by Yocto Project: .ipk, .deb and .rpm.

The actions for packages are different from the find command. ye supports the following actions on packages:

view

show the package contents

info

show the package metadata

scripts

list package scripts (.e.g., postinstall, postrm)

extract

extract package contents to a directory named after the package filename

Just like the view and edit counterparts to the find command, ye provides pkg-view (short: pv), pkg-info (short: pi), pkg-scripts (short: ps) and pkg-extract (short: px) command line shortcuts to the corresponding actions.

Examples:

$ ye pf busybox_
~/yocto/build/tmp/deploy/ipk/cortexa9hf-vfp-neon/busybox_1.22.1-r32.5_cortexa9hf-vfp-neon.ipk
[v] View
[i] Info
[s] Scripts
[x] Extract
Option (ENTER to cancel): v
drwxrwxrwx root/root         0 2015-04-17 11:50 ./
drwxr-xr-x root/root         0 2015-04-17 11:50 ./etc/
-rw-r--r-- root/root       108 2015-04-17 11:50 ./etc/busybox.links.suid
-rw-r--r-- root/root      2217 2015-04-17 11:50 ./etc/busybox.links.nosuid
drwxr-xr-x root/root         0 2015-04-17 11:50 ./bin/
-rwxr-xr-x root/root    544012 2015-04-17 11:50 ./bin/busybox.nosuid
-rwsr-xr-x root/root     52804 2015-04-17 11:50 ./bin/busybox.suid
lrwxrwxrwx root/root         0 2015-04-17 11:50 ./bin/busybox -> busybox.nosuid
lrwxrwxrwx root/root         0 2015-04-17 11:50 ./bin/sh -> busybox.nosuid
/home/mario/yocto/build/tmp/deploy/ipk/cortexa9hf-vfp-neon/busybox_1.22.1-r32.5_cortexa9hf-vfp-neon.ipk
$ ye pi flex_
~/yocto/build/tmp/deploy/ipk/cortexa9hf-vfp-neon/flex_2.5.39-r0.3_cortexa9hf-vfp-neon.ipk
Package: flex
Version: 2.5.39-r0.3
Description: Flex (The Fast Lexical Analyzer)
 Flex is a fast lexical analyser generator.  Flex is a tool for generating
 programs that recognize lexical patterns in text.
Section: devel
Priority: optional
Maintainer: O.S. Systems Software LTDA. <contato@ossystems.com.br>
License: BSD
Architecture: cortexa9hf-vfp-neon
OE: flex
Homepage: http://sourceforge.net/projects/flex/
Depends: m4, libc6 (>= 2.20)
Source: http://downloads.sourceforge.net/flex/flex-2.5.39.tar.bz2 file://run-ptest file://do_not_create_pdf_doc.patch
/home/mario/yocto/build/tmp/deploy/ipk/cortexa9hf-vfp-neon/flex_2.5.39-r0.3_cortexa9hf-vfp-neon.ipk
Tip
If you want to see the contents of the "main" package generated by a recipe (i.e., not -dev, -dbg, -locale etc.), you can append _ to the package name. So, instead of flex, you can use flex_ and ye won’t match flex-dev, for example.

Locating the work directory for recipes

The workdir command (short: wd) will print the work directory for the given recipe regular expression pattern. Like the other commands that deal with regular expressions, workdir implicitly surrounds the given regular expression pattern by .*, unless the -e option is provided.

Example:

$ ye wd busybox
/home/mario/yocto/build/tmp/work/cortexa9hf-vfp-neon-oel-linux-gnueabi/busybox

Viewing log files and scripts

Upon processing recipes, BitBake writes log files and scripts to the directory where it processes recipes. Log files are prefixed by log. and scripts are prefixed by run.:

run.<task>

shows the code that was run to process <task>

log.<task>

shows the output of the execution of run.<task>

ye provides commands to display the contents of log files and scripts: log (short: l) and run (short: r).

Both use as first argument a regex to be matched against recipe names. The second argument (optional), is a regex to be matched against log filenames or scripts. If the second argument is not provided, ye will list all log files or scripts and prompt for the one you want to see.

Both commands accept a -e option to indicate that the recipe regex should not be automatically surrounded by .*.

Examples:

$ ye r base-files
=== Showing run scripts for base-files
[0] run.do_packagedata [0]
[1] run.do_package_write_ipk [1]
[2] run.do_fetch [2]
[3] run.do_install [3]
[4] run.do_unpack [4]
[5] run.do_populate_sysroot [5]
[6] run.do_patch [6]
[7] run.do_package [7]
[8] run.do_prepare_copyleft_sources [8]
[9] run.do_configure [9]
[10] run.do_populate_lic [10]
[11] run.do_compile [11]
[12] run.do_package_qa [12]
Option (ENTER to cancel): 11
      1 #!/bin/sh
      2
      3 # Emit a useful diagnostic if something fails:
      4 bb_exit_handler() {
      5     ret=$?
      ...
$ ye l base-files
=== Showing logs for base-files
[0] log.do_package_qa [0]
[1] log.do_unpack [1]
[2] log.do_configure [2]
[3] log.do_prepare_copyleft_sources [3]
[4] log.do_fetch [4]
[5] log.do_package [5]
[6] log.do_populate_sysroot [6]
[7] log.do_patch [7]
[8] log.do_packagedata [8]
[9] log.do_compile [9]
[10] log.do_install [10]
[11] log.do_populate_lic [11]
[12] log.do_package_write_ipk [12]
Option (ENTER to cancel): 11
      1 DEBUG: Executing python function sstate_task_prefunc
      2 DEBUG: Python function sstate_task_prefunc finished
      ...
$ ye r base-files pack
=== Showing run scripts for base-files
[0] run.do_packagedata [0]
[1] run.do_package_write_ipk [1]
[2] run.do_unpack [2]
[3] run.do_package [3]
[4] run.do_package_qa [4]
Option (ENTER to cancel): 4
      1 def do_package_qa(d):
      2     import subprocess
      3     import oe.packagedata
      4
      ...

The log command also handles the -H option, which tries to make compiler command lines more readable (and numbers them). See some examples below:

Without -H:

$ ye l busybox compile
=== Showing logs for busybox
[0] log.do_compile_ptest_base [0]
[1] log.do_compile [1]
Option (ENTER to cancel): 1
   ...
   1118   gcc -Wp,-MD,applets/.applet_tables.d  -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer       -o applets/applet_tables applets/applet_tables.c
   ...

With -H

$ ye l -H busybox compile
=== Showing logs for busybox
[0] log.do_compile_ptest_base [0]
[1] log.do_compile [1]
Option (ENTER to cancel): 1
...
--------------[ command line 2 ]----------------------
gcc
  -Wp,-MD,applets/.applet_tables.d
  -Wall
  -Wstrict-prototypes
  -O2
  -fomit-frame-pointer
  -o applets/applet_tables
  applets/applet_tables.c
...

Long paths can considerably clutter logs, making them quite difficult to read. Another useful argument to log is -R: it reverse expands some variables in log text, transforming long paths into their corresponding variable. Examples:

Without -R:

$ ye l -H make$ compile
...
Making all in doc
make[2]: Entering directory '/home/mario/src/yocto/build/tmp/work/ppce500v2-oel-linux-gnuspe/make/4.0-r0/build/doc'
make[2]: Leaving directory '/home/mario/src/yocto/build/tmp/work/ppce500v2-oel-linux-gnuspe/make/4.0-r0/build/doc'
make[2]: Entering directory '/home/mario/src/yocto/build/tmp/work/ppce500v2-oel-linux-gnuspe/make/4.0-r0/build'
---------------[ command line 1 ]---------------
powerpc-oel-linux-gnuspe-gcc
  -m32
  -mcpu=8548
  -mabi=spe
  -mspe
  -mfloat-gprs=double
  --sysroot=/home/mario/src/yocto/build/tmp/sysroots/olt8820plus
  -DLOCALEDIR=\"/usr/share/locale\"
  -DLIBDIR=\"/usr/lib\"
  -DINCLUDEDIR=\"/usr/include\"
  -DHAVE_CONFIG_H
  -I.
  -I/home/mario/src/yocto/build/tmp/work/ppce500v2-oel-linux-gnuspe/make/4.0-r0/make-4.0
  -O2
  -pipe
  -g
  -feliminate-unused-debug-types
  -c
  -o ar.o
  /home/mario/src/yocto/build/tmp/work/ppce500v2-oel-linux-gnuspe/make/4.0-r0/make-4.0/ar.c
...

With -R:

$ ye l -H -R make$ compile
...
Making all in doc
make[2]: Entering directory '$B/doc'
make[2]: Leaving directory '$B/doc'
make[2]: Entering directory '$B'
---------------[ command line 1 ]---------------
powerpc-iep-linux-gnuspe-gcc
  -m32
  -mcpu=8548
  -mabi=spe
  -mspe
  -mfloat-gprs=double
  --sysroot=$TMPDIR/sysroots/olt8820plus
  -DLOCALEDIR=\"/usr/share/locale\"
  -DLIBDIR=\"/usr/lib\"
  -DINCLUDEDIR=\"/usr/include\"
  -DHAVE_CONFIG_H
  -I.
  -I$S
  -O2
  -pipe
  -g
  -feliminate-unused-debug-types
  -c
  -o ar.o
  $S/ar.c
...

Finding text (grepping)

ye provides commands to locate text in file contents and on summary lines of commit messages. The next subsections show these commands in detail.

Finding text in source files

The grep command is a thin wrapper around repo grep (repo is the tool used by O.S. Systems to manage multiple git repositories — see the Managing platforms based on the Yocto Project document for more information). Basically, repo grep <arguments> will run git grep <arguments> on each repository (in the sources directory) which is part of the project.

The grep command will run repo grep plus the arguments provided on the command line (any valid argument for git grep) and will prompt you to select one of the matches, then the action to apply on the selected file. In case of a single match, you’ll be only prompted for the action.

Example:

$ ye g -i libfoo
[0] sources/meta-openembedded/meta-oe/recipes-connectivity/samba/samba-3.6.24/waf-as-source.patch:+             """example:  bld.symlink_as('${PREFIX}/lib/libfoo.so', 'libfoo.so.1.2.3') """ [0]
[1] sources/meta-openembedded/meta-oe/recipes-connectivity/samba/samba-3.6.24/waf-as-source.patch:+     libfoo.so is installed as libfoo.so.1.2.3 [1]
[2] sources/poky/meta/classes/package.bbclass:            # /opt/abc/lib/libfoo.so.1 and contains /usr/bin/abc depending on system library libfoo.so.1 [2]
[3] sources/poky/meta/recipes-core/glibc/glibc/eglibc-install-pic-archives.patch: #     $(inst_libdir)/libfoo.so        -- for linking, symlink or ld script [3]
[4] sources/poky/meta/recipes-core/glibc/glibc/eglibc-install-pic-archives.patch: #     $(inst_slibdir)/libfoo.so.NN    -- for loading by SONAME, symlink [4]
Option (ENTER to cancel): 2v
      1 #
      2 # Packaging process
      3 #
      4 # Executive summary: This class iterates over the functions listed in PACKAGEFUNCS
      ...

Finding text in files in the sysroot directory

The sysroot-grep (short: sg) command is similar to the grep command, but instead of searching for matches in the sources directory, it recursively searches for matches in the sysroot directory (<build dir>/tmp/sysroots/<machine>, specifically).

Example:

$ ye sg -i '<libfoo\.a>'
Parsing recipes..done.
[0] /home/mario/src/reach/dizzy/build/tmp/sysroots/g2h-solo-3/usr/lib/perl/ptest/lib/ExtUtils/Liblist.pm:you are using GCC, it gets translated to C<libfoo.a>, but for other win32 [0]
[1] /home/mario/src/reach/dizzy/build/tmp/sysroots/g2h-solo-3/usr/lib/perl/ptest/cpan/ExtUtils-MakeMaker/lib/ExtUtils/Liblist.pm:you are using GCC, it gets translated to C<libfoo.a>, but for other win32 [1]
[2] /home/mario/src/reach/dizzy/build/tmp/sysroots/g2h-solo-3/usr/lib/perl/5.20.0/ExtUtils/Liblist.pm:you are using GCC, it gets translated to C<libfoo.a>, but for other win32 [2]
Option (ENTER to cancel): 1v
      1 package ExtUtils::Liblist;
      2
      3 use strict;
      4
      ...

Finding text in git logs

The git-log-grep command (short: glg) basically runs

git log --oneline | grep <regex>"

for the given regular expressions on the summary lines of all git repositories that are part of the project. By default, it limits the repository history to 1000 commits. If you need to search in older commit summary lines, you can use the -n <num commits> option.

Example:

$ ye glg 'build error'
[0] poky 7eb3e45 bitbake: toasterui: refactor log saving and save out-of-build errors [0]
[1] meta-fsl-arm e45b4f8 linux-imx (2.6.35.3): Fix build errors when using make 3.82 [1]
[2] meta-fsl-arm 7b30034 gst-fsl-plugin-2.0.3: fix build error due to missing uint declaration [2]
[3] meta-fsl-arm c38a612 xf86-video-imxfb: fix build error due to missing uint declaration [3]
[4] meta-openembedded 17ce4c6 libmtp: Fix 'Makefile.am: No such file or directory' build error. [4]
Option (ENTER to cancel): 4
commit 17ce4c6ac0d5b3651c7bd8758511679210a3286c
Author: Charles Oram <charles@oram.co.nz>
Date:   Wed May 14 15:36:45 2014 +1200

    libmtp: Fix 'Makefile.am: No such file or directory' build error.

    * skip_udev_rules_generation() needs to reference Makefile.am in the recipe
      source directory.

    Signed-off-by: Charles Oram <charles@oram.co.nz>
    Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

diff --git a/meta-oe/recipes-connectivity/libmtp/libmtp_1.1.5.bb b/meta-oe/recipes-connectivity/libmtp/libmtp_1.1.5.bb
index f4ea800..0c92ff9 100644
--- a/meta-oe/recipes-connectivity/libmtp/libmtp_1.1.5.bb
+++ b/meta-oe/recipes-connectivity/libmtp/libmtp_1.1.5.bb
@@ -29,8 +29,8 @@ do_unpack[vardeps] += "skip_udev_rules_generation"
 do_unpack[postfuncs] += "skip_udev_rules_generation"

 skip_udev_rules_generation () {
-       sed -i -e '/^noinst_DATA=/,/util\/mtp-hotplug -H/d' Makefile.am
-       cp ${WORKDIR}/69-libmtp.rules ${S}/
+    sed -i -e '/^noinst_DATA=/,/util\/mtp-hotplug -H/d' ${S}/Makefile.am
+    cp ${WORKDIR}/69-libmtp.rules ${S}/
 }

 inherit autotools pkgconfig lib_package

Finding text in the buildhistory repository

The grep-buildhistory commmand (short: gbh) is a wrapper around git grep in the buildhistory directory.

Example:

$ ye gbh 'passwd /bin/busybox'
[0] packages/armv7a-vfp-neon-iep-linux-gnueabi/busybox/busybox/latest.pkg_postinst:     update-alternatives --install /usr/bin/passwd passwd /bin/busybox.suid 50 [0]
[1] packages/armv7a-vfp-neon-iep-linux-gnueabi/busybox/busybox/latest.pkg_postrm:       update-alternatives --remove  passwd /bin/busybox.suid [1]
[2] packages/ppce500v2-iep-linux-gnuspe/busybox/busybox/latest.pkg_postinst:    update-alternatives --install /usr/bin/passwd passwd /bin/busybox.suid 50 [2]
[3] packages/ppce500v2-iep-linux-gnuspe/busybox/busybox/latest.pkg_postrm:      update-alternatives --remove  passwd /bin/busybox.suid [3]

Displaying buildhistory changes

The buildhistory command (short: bh) can be used to display changes in the buildhistory. The required argument (a positive integer) is the number of previous revisions to display. If the optional -d argument is given, buildhistory will show the raw diff output.

buildhistory is basically a wrapper around buildhistory-diff or git diff in the buildhistory directory (when -d is provided).

Example:

$ ye bh 1
packages/cortexa9hf-vfp-neon-oel-linux-gnueabi/tslib/tslib-calibrate: PKGR changed from r0.2 to r0.3
packages/cortexa9hf-vfp-neon-oel-linux-gnueabi/tslib/tslib-conf: PKGR changed from r0.2 to r0.3
packages/cortexa9hf-vfp-neon-oel-linux-gnueabi/tslib/tslib-dbg: PKGR changed from r0.2 to r0.3
packages/cortexa9hf-vfp-neon-oel-linux-gnueabi/tslib/tslib-dev: PKGR changed from r0.2 to r0.3
packages/cortexa9hf-vfp-neon-oel-linux-gnueabi/tslib/tslib-doc: PKGR changed from r0.2 to r0.3
packages/cortexa9hf-vfp-neon-oel-linux-gnueabi/tslib/tslib-locale: PKGR changed from r0.2 to r0.3
packages/cortexa9hf-vfp-neon-oel-linux-gnueabi/tslib/tslib-staticdev: PKGR changed from r0.2 to r0.3
packages/cortexa9hf-vfp-neon-oel-linux-gnueabi/tslib/tslib-tests: PKGR changed from r0.2 to r0.3
packages/cortexa9hf-vfp-neon-oel-linux-gnueabi/tslib/tslib: PKGR changed from r0.2 to r0.3

Finding documentation for variables

The doc command (short: d) is a man-like tool for Yocto Project’s variables. It searches the Yocto Project Reference Manual for variables matching the given regular expression pattern (matching is case-insensitive).

Example:

$ ye d STAGING_DIR
[0] STAGING_DIR [0]
[1] STAGING_DIR_TARGET [1]
[2] STAGING_DIR_HOST [2]
[3] STAGING_DIR_NATIVE [3]
Option (ENTER to cancel): 3

=== STAGING_DIR_NATIVE
 Specifies the path to the sysroot directory for the build host.

ye maintains a cache of the Yocto project Reference Manual for seven days (under $YE_DIR/doc-data). If the cache is older than seven days, it will fetch the reference manual data and update the cache.

Expanding BitBake variables

The expand command (short: x) can be very handy to find out variables' values and how they are assembled. It takes as argument a recipe and the variable you want to expand. It’ll print the final variable value and the intermediary expansions (in case the variable value references other variables) in the context of the given recipe.

Example:

$ ye x core-image-minimal STAGING_DIR_TARGET
Parsing recipes..done.
=== Final value
STAGING_DIR_TARGET = /home/mario/src/yocto/build/tmp/sysroots/nitrogen6x-lite

=== Expansion
STAGING_DIR_TARGET ==> ${STAGING_DIR}/${MACHINE}
    STAGING_DIR ==> ${TMPDIR}/sysroots
        TMPDIR ==> /home/mario/src/yocto/build/tmp
    MACHINE ==> nitrogen6x-lite

Except for the find and grep commands, all commands expect the BUILDDIR environment variable to be set in the environment. This variable is automatically set by the setup-environment script provided by O.S. Systems for the Yocto Project-based projects.

Moving around: changing directories

The cd command can be used to move around the project directory. ye provides some shortcut names for common directories in the layout adopted by O.S. Systems. See the documentation for the cd command for all available shortcuts.

Using the cd command is just like using the shell’s cd command, but giving the available shortcuts as arguments. Examples:

$ pwd
/home/mario/src/yocto

$ ye cd
$ pwd
/home/mario/src/yocto/build

$ ye cd src
$ pwd
/home/mario/src/yocto/sources

$ ye cd src flex
[0] ~/src/yocto/sources/poky/meta/recipes-bsp/grub/files/fix-issue-with-flex-2.5.37.patch [0]
[1] ~/src/yocto/sources/poky/meta/recipes-devtools/flex/flex_2.5.39.bb [1]
[2] ~/src/yocto/sources/poky/meta/recipes-devtools/flex/flex.inc [2]
Option (ENTER to cancel): 0
/home/mario/src/yocto/sources/poky/meta/recipes-bsp/grub/files/fix-issue-with-flex-2.5.37.patch
$ pwd
/home/mario/src/yocto/sources/poky/meta/recipes-bsp/grub/files

$ ye cd wd flex
[0] /home/mario/src/yocto/build/tmp/work/x86_64-linux/flex-native [0]
[1] /home/mario/src/yocto/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/flex [1]
Option (ENTER to cancel): 1
/home/mario/src/yocto/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/flex
$ pwd
/home/mario/src/yocto/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/flex
Note
the cd command requires evaluating the ye-cd shell wrapper that is shipped with ye. O.S. Systems' setup-environment script will do that automatically if you have ye in your source tree.

Configuration

ye allows you to customize the pager and the editor it uses for displaying and editing files, respectively.

The configuration is via environment variables. ye uses YE_PAGER and YE_EDITOR for pager and editor, respectively.

For the editor, ye first checks if YE_EDITOR is set in the environment. If it is not set, it checks the EDITOR environment variable. If it is not set, it resorts to emacs. If emacs cannot be found, you’ll get an error.

For the pager, ye first checks if YE_PAGER is set in the environment. If it is not set, it checks the PAGER environment variable. If it is not set, it resorts to less -N %s. If less cannot be found, you’ll get an error.

%s can be used as a placeholder for the file to act upon.

Requirements

A Python installation and the directory structure in the layout created by O.S. System’s Yocto Project-based platforms.

ye has been more extensively tested with Python version 2.7.3, but it should work with other recent Python 2.x versions and with Python 3.x.

For the doc command, the lxml module for Python is required.

For the cd command, a Bourne-compatible shell is required.

Limitations

Some ye commands use bitbake behind the scenes, and since bitbake doesn’t support running multipl instances in parallel under the same build directory, some ye features may not work while you are using bitbake.

License

ye is distributed under the GNU Affero General Public License. See the LICENSE file for the full license text.

About

Yocto Explorer: is a command line tool to ease the manipulation of files under the directory structure adopted by O.S. Systems to organize projects that use the Yocto Project

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Contributors 4

  •  
  •  
  •  
  •