Skip to content

56quarters/apcmetrics

Repository files navigation

APC Metrics

build status

Prometheus exporter for APC UPSes controlled by apcupsd

Features

  • Export metrics about your APC UPS such as runtime remaining, battery charge, current load, etc.
  • Inspect the current status of your APC UPS using apcmetrics status
  • Inspect recent events for your APC UPS using apcmetrics events

The following metrics are exported:

  • apc_info - Info about the UPS
  • apc_status - Current status of the UPS
  • apc_time_left - Remaining runtime left on the batteries in seconds
  • apc_load_percent - Percentage of load capacity
  • apc_charge_percent - Percentage of charge of the batteries
  • apc_line_voltage - Current line voltage
  • apc_low_transfer_voltage - Line voltage below which the UPS will switch to batteries
  • apc_high_transfer_voltage - Line voltage above which the UPS will switch to batteries
  • apc_battery_voltage - Battery voltage
  • apc_nominal_battery_voltage - Nominal battery voltage
  • apc_nominal_input_voltage - Nominal input voltage
  • apc_nominal_wattage - Max power the UPS is designed to supply
  • apc_battery_date - Date the batteries were last replaced as a UNIX timestamp
  • apc_last_time_on_battery - Last transfer on to batteries as a UNIX timestamp
  • apc_last_time_off_battery - Last transfer off of batteries as a UNIX timestamp
  • apc_last_self_test - Last self test as a UNIX timestamp

Building

To build from source you'll need Go 1.16 installed.

git clone git@github.com:56quarters/apcmetrics.git && cd apcmetrics
make build

The apcmetrics binary will then be in the root of the checkout.

Install

At the moment, apcmetrics is GNU/Linux specific. As such, these instructions assume a GNU/Linux system.

To install apcmetrics after building as described above:

  • Copy the binary to /usr/local/bin
sudo cp apcmetrics /usr/local/bin/
  • Copy and enable the Systemd unit
sudo cp ext/apcmetrics.service /etc/systemd/system/
sudo systemctl daemon-reload
sudo systemctl enable apcmetrics.service
  • Start the daemon
sudo systemctl start apcmetrics.service

Dependencies

apcmetrics connects to apcupsd to read metrics about an APC UPS. As such you will need an instance of apcupsd running that apcmetrics can connect to. apcmetrics uses the NIS Server feature of apcupsd which is usually enabled by default.

apcupsd can be installed on Debian or Ubuntu systems with apt-get install apcupsd. apcmetrics must be able to connect to the server run by apcupsd. The easiest way to do this is to run apcmetrics on the same host that apcupsd is running on.

Make sure the following settings are in place for apcupsd:

  • NETSERVER on
  • NISIP <interface address>
  • NISPORT 3551

Usage

The primary purpose of apcmetrics is to export metrics about an APC UPS to Prometheus. However, it can also be used to inspect the current status of your UPS or recent events (such as power outages and self-tests). Examples of how to do each are given below

Metrics export

apcmetrics must connect to apcupsd to export metrics. It defaults to collecting metrics from a locally running apcupsd daemon using the default port of 3551. If apcupsd is not running locally, you can supply the address using the --ups.address CLI flag.

An example of running apcmetrics this way:

./apcmetrics --ups.address=example:3551 metrics

In another terminal:

curl -s 'http://localhost:9780/metrics'

Prometheus metrics are exposed on port 9780 at /metrics by default. Once apcmetrics is running, configure scrapes of it by your Prometheus server. Add the host running apcmetrics as a target under the Prometheus scrape_configs section as described by the example below.

# Sample config for Prometheus.

global:
  scrape_interval: 15s
  evaluation_interval: 15s
  external_labels:
    monitor: 'my_prom'

scrape_configs:
  - job_name: apcmetrics
    static_configs:
      - targets: [ 'example:9780' ]

apcmetrics status

Running apcmetrics status will display the current status of the APC UPS as JSON. It defaults to collecting metrics from a locally running apcupsd daemon using the default port of 3551. If apcupsd is not running locally, you can supply the address using the --ups.address CLI flag. An example is given below.

$ apcmetrics status
{
  "hostname": "example",
  "version": "3.14.14 (31 May 2016) debian",
  "ups_name": "example",
  "model": "Back-UPS XS 1500 LCD",
  "driver": "USB UPS Driver",
  "ups_mode": "Stand Alone",
  "status": "ONLINE",
  "time_left": 4320000000000,
  "load_percent": 6,
  "charge_percent": 82,
  "line_voltage": 120,
  "low_transfer_voltage": 88,
  "high_transfer_voltage": 139,
  "battery_voltage": 25.2,
  "nominal_battery_voltage": 24,
  "nominal_input_voltage": 120,
  "nominal_wattage": 865,
  "battery_date": "2013-07-15T00:00:00Z",
  "last_time_on_battery": "2021-11-06T15:39:29-04:00",
  "last_time_off_battery": "2021-11-06T15:40:23-04:00",
  "last_self_test": "0001-01-01T00:00:00Z"
}

apcmetrics events

Running apcmetrics events will display the last few events recorded by the APC UPS as JSON. It defaults to collecting metrics from a locally running apcupsd daemon using the default port of 3551. If apcupsd is not running locally, you can supply the address using the --ups.address CLI flag. An example is given below.

$ apcmetrics events
[
  {
    "timestamp": "2021-10-31T19:28:19-04:00",
    "message": "UPS Self Test switch to battery."
  },
  {
    "timestamp": "2021-10-31T19:28:28-04:00",
    "message": "UPS Self Test completed: Battery OK"
  },
  {
    "timestamp": "2021-11-06T15:39:29-04:00",
    "message": "Power failure."
  },
  {
    "timestamp": "2021-11-06T15:39:35-04:00",
    "message": "Running on UPS batteries."
  },
  {
    "timestamp": "2021-11-06T15:40:23-04:00",
    "message": "Mains returned. No longer on UPS batteries."
  },
  {
    "timestamp": "2021-11-06T15:40:23-04:00",
    "message": "Power is back. UPS running on mains."
  }
]

Development

To build a binary:

make build

To build a tagged release binary:

make build-dist

To build a Docker image

make image

To build a tagged release Docker image

make image-dist

To run tests

make test

To run lints

make lint

License

apcmetrics is available under the terms of the GPL, version 3.

Contribution

Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you shall be licensed as above, without any additional terms or conditions.

About

APC UPS metrics exporter for Prometheus

Resources

License

Stars

Watchers

Forks

Packages

No packages published