Siterwell GS361A-H04 adding missing functions #1084

MattWestb · 2021-10-19T11:59:35Z

MattWestb
Oct 19, 2021

The Siterwell GS361A-H04 is having any clones that is using there own software ID:

OEM / Brand	Model	Manufacturer Name	Model ID	ZHA Quirk	Request
Siterwell	GS361A	_TYST11_zivfvd7h	ivfvd7h	✅Site I	721
Siterwell	GS361A	_TZE200_zivfvd7h	TS0601	✅Site II	738
Revolt	NX-4911	_TYST11_kfvq6avy	fvq6avy	✅ Site I	581
Revolt	NX-4911	_TZE200_kfvq6avy	TS0601	✅ Site II	632
essentials	ESS-HK-TRV-6103	_TYST11_jeaxp72v	eaxp72v	✅ Site I	420
essentials	ESS-HK-TRV-6103	_TZE200_jeaxp72v	TS0601	✅ Site II	1053
Nedis	ZBHTR10WT	_TYST11_hhrtiq0x	hrtiq0x	✅Site I	990
Nedis	ZBHTR10WT	_TZE200_hhrtiq0x	TS0601	✅Site II	990
Unitec	30946	_TYST11_ps5v5jor	s5v5jor	✅Site I	1008
Unitec	30946	_TZE200_ps5v5jor	TS0601	✅Site II	1000
Tesla	TSL-TRV-GS361A	_TYST11_owwdxjbx	wwdxjbx	✅ Site I	1053
Tesla	TSL-TRV-GS361A	_TZE200_owwdxjbx	TS0601	✅ Site II	1053
Alecto	SMART-HEAT10	_TYST11_8daqwrsj	daqwrsj	✅ Site I	1067
Alecto	SMART-HEAT10	_TZE200_8daqwrsj	TS0601	✅ Site II	1067

Then it was added in the first PR for tuya TRVs and dont have getting any updates so they is lucking some functions that is not being implanted and other TRVs like the CN-Hysen ("Moes" family) have getting updated quirks that is fixing that.

From the device its some DP commands that was added and is not implanted in the tuya MCU like reporting valve position and Calibrating local temperature.
And i have found some not implanted DP that is can sending (by taking out the battery then its joined a have the quirk loaded and putting it back is sending all DP its using) that is report if the valve is jammed if valve detect is enabled, and if window detect is being triggered if window detect is enabled on the device.

List of the DPs:

0x0107 (263) Child lock switch [0], [1]
0x0112 (274) Window detect switch [0], [1]
0x0114 (276) Valve detect switch [0], [1]
0x0202 (514) Target temp
0x0203 (515) Local temp
0x0215 (533) Battery % (0-100%)
0x0404 (1028) Mode (0-3, reset mode (3) is not in GUI but can being triggered by cluster commands)
0x0411 (1041) Window open alarm (depends on 0x0112) not implanted. 0 = OK 1 = Alarm
0x0413 (1043) Valve jammed alarm (depend on 0x0114) not implanted. 0 = OK 1 = Alarm

I have updating my local quirk with deleting the 2 not existing DPs and adding valve jammed and window open alarms so they is sending to the quirk bus.
Also ZHA is using min_temp: 7 and max_temp: 30 that is lesser that the TRV is capable off so i have implanting adding it to the Zigbee side so ZHA is using the right 5-30°C and its working OK.

Now to the not implanted / fixed things:

Children lock, Window detection and valve detection need one "switch" added in ZHA.
I have looking but not fond one easy and nice way to implanting it on one Zigbee cluster but its on the list.
Window open alarm and Valve jammed alarm is triggered OK from the TRV and is going in the bus but they need one sensor like Aquara windows sensor in ZHA (one open and close symbol that only showing its status and can being used in automatons) is on the list then i finding the way getting it implanted on one cluster so its on the list.
The working mode the TRV is sending and can being sett is
- 0 = Away / Anti-freezing / Off mode,
- 1 = Automatic / Schedule mode (ist not having the times in the TRV is getting the new set point temperatures from the host system) that need being exposed OK in ZHA so user can enabling there automatons then its active and sending the new set points to the TRV and inactivating if one other mode is selected.
- 2 = Manual heating (the TRV is using the set point to automatic holding the temperature).
- 3 = "IF" is the calibration then installing the TRV and is not needed but can being set on the thermostat cluster with attributes,

All modes is sent and received OK to and from the TRV but is not so nide done in ZHA then its only possible witching it on or off (off = away mode (0) and on is the last heating more used (1 or 2)).
Some other TRV have the Schedule working in ZHA but i have not found how to implanting that.

What i have not find is how to getting the TRV updating the temperature more often then every hour without changing the mode or the set point. Other TRVs is using sending calibrating local temperature and its replaying back with the "new" temperature but is not working then the device dont have DP for calibrating the temperature ;-((

Over all is one small and nice looking TRV with enough functions for "normal" users that dont need having schedule in the device and can doing it with automation in HA.
I have 2 in production and on on the table for testing for 11 mounts and one have low battery for very long time but is still on line and one have getting the valve jammed mechanically but over all they is working well.

The changes i have made is to less for putting in one PR and is not helping users but then i getting more in place i doing that but very likely is not all coming at the same time then its need finding good ways implanting it in ZHA.

MattWestb · 2021-10-20T08:39:57Z

MattWestb
Oct 20, 2021
Author

I was patching ZHA and adding the part for using presets by appending this in the end of https://github.com/home-assistant/core/blob/dev/homeassistant/components/zha/climate.py

@STRICT_MATCH(
    channel_names=CHANNEL_THERMOSTAT,
    manufacturers={
        "_TYST11_jeaxp72v",
        "_TYST11_kfvq6avy",
        "_TYST11_zivfvd7h",
        "_TYST11_hhrtiq0x",
        "_TYST11_ps5v5jor",
        "_TYST11_owwdxjbx",
        "_TYST11_8daqwrsj",
        "_TZE200_jeaxp72v",
        "_TZE200_kfvq6avy",
        "_TZE200_zivfvd7h",
        "_TZE200_hhrtiq0x",
        "_TZE200_ps5v5jor",
        "_TZE200_owwdxjbx",
        "_TZE200_8daqwrsj",
    },
)
class SiterwellThermostat(Thermostat):
    """Siterwell Thermostat implementation."""

    def __init__(self, unique_id, zha_device, channels, **kwargs):
        """Initialize ZHA Thermostat instance."""
        super().__init__(unique_id, zha_device, channels, **kwargs)
        self._presets = [
            PRESET_NONE,
            PRESET_AWAY,
            PRESET_SCHEDULE,
        ]
        self._supported_flags |= SUPPORT_PRESET_MODE

    @property
    def hvac_modes(self) -> tuple[str, ...]:
        """Return only the heat mode, because the device can't be turned off."""
        return (HVAC_MODE_HEAT,)

    async def async_attribute_updated(self, record):
        """Handle attribute update from device."""
        if record.attr_name == "operation_preset":
            if record.value == 0:
                self._preset = PRESET_AWAY
            if record.value == 1:
                self._preset = PRESET_SCHEDULE
            if record.value == 2:
                self._preset = PRESET_NONE
        await super().async_attribute_updated(record)

    async def async_preset_handler(self, preset: str, enable: bool = False) -> bool:
        """Set the preset mode."""
        mfg_code = self._zha_device.manufacturer_code
        if not enable:
            return await self._thrm.write_attributes(
                {"operation_preset": 2}, manufacturer=mfg_code
            )
        if preset == PRESET_AWAY:
            return await self._thrm.write_attributes(
                {"operation_preset": 0}, manufacturer=mfg_code
            )
        if preset == PRESET_SCHEDULE:
            return await self._thrm.write_attributes(
                {"operation_preset": 1}, manufacturer=mfg_code
            )

        return False

with 2 blank line before and no after.
Its loading OK and have non = normal mode manual setting), schedule mode and away mode.
That is very OK then the TRV dont have one real off mode and away is normally 5°C with antifreeze protection.
With it patched is not possible changing mode from ZHA but temperature setting and reading is working OK until the quirk is being updated with the right handles.

The schedule mode shall being exposed and used for enable / disable schedule automation.
Then its on the automation shall being active and off it shall deactivating the automation and also possible setting on / off in the automation.
The automation is then sending new setpoint temperature that on schedule as the user have putting it it until the mode is changed to away or non.

I think this is good implementation for other TRVs that s not having implanting more the on / off.

1 reply

MattWestb Oct 20, 2021
Author

One more thing: The setpoing temperature is being sett for the current selected mode on the TRV = if is in away mode its setting the setpoing temperature for the away mode and reporting it back, but if changing the mode to manual / schedule the TRV is showing and reporting the last sett temperature for that mode.

Simple but working great !!!

MattWestb · 2021-10-20T18:59:56Z

MattWestb
Oct 20, 2021
Author

The Quirk is in place but its looks its only working one way (only updated Siterwell part):

SITERWELL_CHILD_LOCK_ATTR = 0x0107  # [0] unlocked [1] child-locked
SITERWELL_WINDOW_DETECT_ATTR = 0x0112  # [0] inactive [1] active
SITERWELL_VALVE_DETECT_ATTR = 0x0114  # [0] do not report [1] report
SITERWELL_VALVE_STATE_ATTR = 0x026D  # [0,0,0,55] opening percentage
SITERWELL_TARGET_TEMP_ATTR = 0x0202  # [0,0,0,210] target room temp (decidegree)
SITERWELL_TEMPERATURE_ATTR = 0x0203  # [0,0,0,200] current room temp (decidegree)
SITERWELL_BATTERY_ATTR = 0x0215  # [0,0,0,98] battery charge
SITERWELL_MODE_ATTR = 0x0404  # [0] off [1] scheduled [2] manual
SITERWELL_WINDOW_ALARM_ATTR = 0x0411  # [0] clear [1] alarm
SITERWELL_VALVE_JAMMED_ATTR = 0x0413  # [0] clear [1] alarm

_LOGGER = logging.getLogger(__name__)



class SiterwellManufCluster(TuyaManufClusterAttributes):
    """Manufacturer Specific Cluster of some thermostatic valves."""

    manufacturer_attributes = {
        SITERWELL_CHILD_LOCK_ATTR: ("child_lock", t.uint8_t),
        SITERWELL_WINDOW_DETECT_ATTR: ("window_detection", t.uint8_t),
        SITERWELL_VALVE_DETECT_ATTR: ("valve_detect", t.uint8_t),
        SITERWELL_VALVE_STATE_ATTR: ("valve_state", t.uint32_t),
        SITERWELL_TARGET_TEMP_ATTR: ("target_temperature", t.uint32_t),
        SITERWELL_TEMPERATURE_ATTR: ("temperature", t.uint32_t),
        SITERWELL_BATTERY_ATTR: ("battery", t.uint32_t),
        SITERWELL_MODE_ATTR: ("mode", t.uint8_t),
        SITERWELL_WINDOW_ALARM_ATTR: ("window_alarm", t.uint8_t),
        SITERWELL_VALVE_JAMMED_ATTR: ("valve_jammed", t.uint8_t),
    }

    TEMPERATURE_ATTRS = {
        SITERWELL_TEMPERATURE_ATTR: "local_temp",
        SITERWELL_TARGET_TEMP_ATTR: "occupied_heating_setpoint",
    }

    DIRECT_MAPPED_ATTRS = {
        SITERWELL_MODE_ATTR: ("operation_preset", None),
    }

    def _update_attribute(self, attrid, value):
        super()._update_attribute(attrid, value)
        if attrid in self.TEMPERATURE_ATTRS:
            self.endpoint.device.thermostat_bus.listener_event(
                "temperature_change",
                self.TEMPERATURE_ATTRS[attrid],
                value * 10,  # decidegree to centidegree
            )
        elif attrid == SITERWELL_MODE_ATTR:
            self.endpoint.device.thermostat_bus.listener_event("mode_change", value)
            self.endpoint.device.thermostat_bus.listener_event(
                "state_change", value > 0
            )
        elif attrid == SITERWELL_VALVE_STATE_ATTR:
            self.endpoint.device.thermostat_bus.listener_event("state_change", value)
        elif attrid == SITERWELL_CHILD_LOCK_ATTR:
            mode = 1 if value else 0
            self.endpoint.device.ui_bus.listener_event("child_lock_change", mode)
        elif attrid == SITERWELL_BATTERY_ATTR:
            self.endpoint.device.battery_bus.listener_event("battery_change", value)
        elif attrid == SITERWELL_WINDOW_ALARM_ATTR:
            self.endpoint.device.thermostat_bus.listener_event("window_alarm_change", value)
        elif attrid == SITERWELL_VALVE_JAMMED_ATTR:
            self.endpoint.device.thermostat_bus.listener_event("valve_jammed_change", value)


class SiterwellThermostat(TuyaThermostatCluster):
    """Thermostat cluster for some thermostatic valves."""

    class Preset(t.enum8):
        """Working modes of the thermostat."""

        Away = 0x00
        Schedule = 0x01
        Manual = 0x02

    _CONSTANT_ATTRIBUTES = {
        0x0015: 500,  # Min heating SP
        0x0016: 3000,  # Max heating SP
        0x001B: Thermostat.ControlSequenceOfOperation.Heating_Only,
        0x001C: Thermostat.SystemMode.Heat,
    }

    manufacturer_attributes = {
        0x4000: ("operation_preset", Preset),
    }

    DIRECT_MAPPING_ATTRS = {
        "operation_preset": (SITERWELL_MODE_ATTR, None),
    }

    def map_attribute(self, attribute, value):
        """Map standardized attribute value to dict of manufacturer values."""

        if attribute in self.DIRECT_MAPPING_ATTRS:
            return {
                self.DIRECT_MAPPING_ATTRS[attribute][0]: value
                if self.DIRECT_MAPPING_ATTRS[attribute][1] is None
                else self.DIRECT_MAPPING_ATTRS[attribute][1](value)
            }
        if attribute == "occupied_heating_setpoint":
            # centidegree to decidegree
            return {SITERWELL_TARGET_TEMP_ATTR: round(value / 10)}
        if attribute in ("programing_oper_mode", "occupancy"):
            if attribute == "occupancy":
                occupancy = value
                oper_mode = self._attr_cache.get(
                    self.attridx["programing_oper_mode"],
                    self.ProgrammingOperationMode.Simple,
                )
            else:
                occupancy = self._attr_cache.get(
                    self.attridx["occupancy"], self.Occupancy.Occupied
                )
                oper_mode = value
            if occupancy == self.Occupancy.Unoccupied:
                return {SITERWELL_MODE_ATTR: 0}
            if occupancy == self.Occupancy.Occupied:
                if oper_mode == self.ProgrammingOperationMode.Schedule_programming_mode:
                    return {SITERWELL_MODE_ATTR: 1}
                if oper_mode == self.ProgrammingOperationMode.Simple:
                    return {SITERWELL_MODE_ATTR: 2}
                self.error("Unsupported value for ProgrammingOperationMode")
            else:
                self.error("Unsupported value for Occupancy")
        if attribute == "system_mode":
            return {
                SITERWELL_MODE_ATTR: self._attr_cache.get(
                    self.attridx["operation_preset"], 2
                )
            }

    def mode_change(self, value):
        """System Mode change."""
        if value == 0:
            prog_mode = self.ProgrammingOperationMode.Simple
            occupancy = self.Occupancy.Unoccupied
        elif value == 1:
            prog_mode = self.ProgrammingOperationMode.Schedule_programming_mode
            occupancy = self.Occupancy.Occupied
        elif value == 2:
            prog_mode = self.ProgrammingOperationMode.Simple
            occupancy = self.Occupancy.Occupied

        self._update_attribute(self.attridx["programing_oper_mode"], prog_mode)
        self._update_attribute(self.attridx["occupancy"], occupancy)


class SiterwellUserInterface(TuyaUserInterfaceCluster):
    """HVAC User interface cluster for tuya electric heating thermostats."""

    _CHILD_LOCK_ATTR = SITERWELL_CHILD_LOCK_ATTR

Then changing mode in ZHA i getting in the log:

2021-10-20 20:06:20 DEBUG (MainThread) [zhaquirks.tuya] [0x16a6:1:0x0201] Mapping standard operation_preset (0x4000) with value <Preset.Schedule: 1> to custom {1028: <Preset.Schedule: 1>}

that is the command from ZHA to the quirk and then the quirk is sending mode change to the TRV (normal 2-5 times then not getting and replay from the TRV) and its changing mode and reporting all new attribute to ZHA that is updating it = all is OK.

Then changing mode on the TRV or with cluster commands (attribute 0x0404) the TRV is doing all the changed and ZHA is getting it but not the preset change is sent on attribute 0x4000 from the quirk so ZHA it staying in the last selected mode (can being Schedule mode with all TRV attribute from Away mode).

So the command from the TRV is not triggering one mode change on attribute 0x4000 but all other is updated.

I like that is working both ways so the user can see what mode the TRV is in if is changed from ZHA or local.
Also its open up for the new device automatons on climate components and dont need the custom attributes that is different for all TRV implementations.

If ZHA is not getting the updated mode from the TRV and some changing it local then the automation is not working OK.

I letting it over the night and see if i can finding somthing.

1 reply

MattWestb Oct 20, 2021
Author

Sorry mode = Preset :-((

But its working doing automatons with it :-))

)

MattWestb · 2021-10-22T12:05:56Z

MattWestb
Oct 22, 2021
Author

Updated Quirk that working in both ways then changing working mode (presets in ZHA):

# info from https://github.com/Koenkk/zigbee-herdsman-converters/blob/master/converters/common.js#L113
# and https://github.com/Koenkk/zigbee-herdsman-converters/blob/master/converters/fromZigbee.js#L362
SITERWELL_CHILD_LOCK_ATTR = 0x0107  # [0] unlocked [1] child-locked
SITERWELL_WINDOW_DETECT_ATTR = 0x0112  # [0] inactive [1] active
SITERWELL_VALVE_DETECT_ATTR = 0x0114  # [0] do not report [1] report
# SITERWELL_VALVE_STATE_ATTR = 0x026D  # [0,0,0,55] opening percentage = not implanted in the device
SITERWELL_TARGET_TEMP_ATTR = 0x0202  # [0,0,0,210] target room temp (decidegree)
SITERWELL_TEMPERATURE_ATTR = 0x0203  # [0,0,0,200] current room temp (decidegree)
SITERWELL_BATTERY_ATTR = 0x0215  # [0,0,0,98] battery charge
SITERWELL_MODE_ATTR = 0x0404  # [0] off [1] scheduled [2] manual
SITERWELL_WINDOW_ALARM_ATTR = 0x0411  # [0] clear [1] alarm
SITERWELL_VALVE_JAMMED_ATTR = 0x0413  # [0] clear [1] alarm

_LOGGER = logging.getLogger(__name__)



class SiterwellManufCluster(TuyaManufClusterAttributes):
    """Manufacturer Specific Cluster of some thermostatic valves."""

    def __init__(self, *args, **kwargs):
        """Init."""
        super().__init__(*args, **kwargs)
        global SiterwellManufClusterSelf
        SiterwellManufClusterSelf = self

    manufacturer_attributes = {
        SITERWELL_CHILD_LOCK_ATTR: ("child_lock", t.uint8_t),
        SITERWELL_WINDOW_DETECT_ATTR: ("window_detection", t.uint8_t),
        SITERWELL_VALVE_DETECT_ATTR: ("valve_detect", t.uint8_t),
#        SITERWELL_VALVE_STATE_ATTR: ("valve_state", t.uint32_t),  # Not implanted in the device
        SITERWELL_TARGET_TEMP_ATTR: ("target_temperature", t.uint32_t),
        SITERWELL_TEMPERATURE_ATTR: ("temperature", t.uint32_t),
        SITERWELL_BATTERY_ATTR: ("battery", t.uint32_t),
        SITERWELL_MODE_ATTR: ("mode", t.uint8_t),
        SITERWELL_WINDOW_ALARM_ATTR: ("window_alarm", t.uint8_t),
        SITERWELL_VALVE_JAMMED_ATTR: ("valve_jammed", t.uint8_t),
    }

    TEMPERATURE_ATTRS = {
        SITERWELL_TEMPERATURE_ATTR: "local_temp",
        SITERWELL_TARGET_TEMP_ATTR: "occupied_heating_setpoint",
    }


    def _update_attribute(self, attrid, value):
        super()._update_attribute(attrid, value)
        if attrid in self.TEMPERATURE_ATTRS:
            self.endpoint.device.thermostat_bus.listener_event(
                "temperature_change",
                self.TEMPERATURE_ATTRS[attrid],
                value * 10,  # decidegree to centidegree
            )
        elif attrid == SITERWELL_MODE_ATTR:
            self.endpoint.device.thermostat_bus.listener_event("mode_change", value)
            self.endpoint.device.thermostat_bus.listener_event(
                "state_change", value > 0
            )
#        elif attrid == SITERWELL_VALVE_STATE_ATTR:
#            self.endpoint.device.thermostat_bus.listener_event("state_change", value)
        elif attrid == SITERWELL_CHILD_LOCK_ATTR:
            mode = 1 if value else 0
            self.endpoint.device.ui_bus.listener_event("child_lock_change", mode)
        elif attrid == SITERWELL_WINDOW_DETECT_ATTR:
            self.endpoint.device.window_detection_bus.listener_event(
                "window_detect_change", value
            )
        elif attrid == SITERWELL_BATTERY_ATTR:
            self.endpoint.device.battery_bus.listener_event("battery_change", value)
        elif attrid == SITERWELL_WINDOW_ALARM_ATTR:
            self.endpoint.device.thermostat_bus.listener_event("window_alarm_change", value)
        elif attrid == SITERWELL_VALVE_JAMMED_ATTR:
            self.endpoint.device.thermostat_bus.listener_event("valve_jammed_change", value)


class SiterwellThermostat(TuyaThermostatCluster):
    """Thermostat cluster for some thermostatic valves."""

    class Preset(t.enum8):
        """Working modes of the thermostat."""

        Away = 0x00
        Schedule = 0x01
        Manual = 0x02

    _CONSTANT_ATTRIBUTES = {
        0x0015: 500,  # Min heating SP
        0x0016: 3000,  # Max heating SP
        0x001B: Thermostat.ControlSequenceOfOperation.Heating_Only,
        0x001C: Thermostat.SystemMode.Heat,
    }

    manufacturer_attributes = {
        0x4000: ("operation_preset", Preset),
    }

    DIRECT_MAPPING_ATTRS = {
        "operation_preset": (SITERWELL_MODE_ATTR, None),
    }

    def map_attribute(self, attribute, value):
        """Map standardized attribute value to dict of manufacturer values."""

        if attribute in self.DIRECT_MAPPING_ATTRS:
            return {
                self.DIRECT_MAPPING_ATTRS[attribute][0]: value
                if self.DIRECT_MAPPING_ATTRS[attribute][1] is None
                else self.DIRECT_MAPPING_ATTRS[attribute][1](value)
            }
        if attribute == "occupied_heating_setpoint":
            # centidegree to decidegree
            return {SITERWELL_TARGET_TEMP_ATTR: round(value / 10)}
        if attribute in ("programing_oper_mode", "occupancy"):
            if attribute == "occupancy":
                occupancy = value
                oper_mode = self._attr_cache.get(
                    self.attridx["programing_oper_mode"],
                    self.ProgrammingOperationMode.Simple,
                )
            else:
                occupancy = self._attr_cache.get(
                    self.attridx["occupancy"], self.Occupancy.Occupied
                )
                oper_mode = value
            if occupancy == self.Occupancy.Unoccupied:
                return {SITERWELL_MODE_ATTR: 0}
            if occupancy == self.Occupancy.Occupied:
                if oper_mode == self.ProgrammingOperationMode.Schedule_programming_mode:
                    return {SITERWELL_MODE_ATTR: 1}
                if oper_mode == self.ProgrammingOperationMode.Simple:
                    return {SITERWELL_MODE_ATTR: 2}
                self.error("Unsupported value for ProgrammingOperationMode")
            else:
                self.error("Unsupported value for Occupancy")
        if attribute == "system_mode":
            return {
                SITERWELL_MODE_ATTR: self._attr_cache.get(
                    self.attridx["operation_preset"], 2
                )
            }

    def mode_change(self, value):
        """System Mode change."""
        if value == 0:
            operation_preset = self.Preset.Away
            prog_mode = self.ProgrammingOperationMode.Simple
            occupancy = self.Occupancy.Unoccupied
        elif value == 1:
            operation_preset = self.Preset.Schedule
            prog_mode = self.ProgrammingOperationMode.Schedule_programming_mode
            occupancy = self.Occupancy.Occupied
        elif value == 2:
            operation_preset = self.Preset.Manual
            prog_mode = self.ProgrammingOperationMode.Simple
            occupancy = self.Occupancy.Occupied

        self._update_attribute(self.attridx["programing_oper_mode"], prog_mode)
        self._update_attribute(self.attridx["occupancy"], occupancy)
        self._update_attribute(
            self.attridx["operation_preset"], operation_preset)


class SiterwellUserInterface(TuyaUserInterfaceCluster):
    """HVAC User interface cluster for tuya heating thermostats."""

    _CHILD_LOCK_ATTR = SITERWELL_CHILD_LOCK_ATTR


class SiterwellChildLock(LocalDataCluster, OnOff):
    """On/Off cluster for the child lock function of the heating thermostats."""

    def __init__(self, *args, **kwargs):
        """Init."""
        super().__init__(*args, **kwargs)
        # if self.endpoint.device.manufacturer == "_TZE200_qc4fpmcn":
        #     ZhaEntity._unique_id_suffix = "test"
        # else:
        #     ZhaEntity._unique_id_suffix = ""
        self.endpoint.device.child_lock_bus.add_listener(self)

    def child_lock_change(self, value):
        """Child lock change."""
        self._update_attribute(self.attridx["on_off"], value)

    async def write_attributes(self, attributes, manufacturer=None):
        """Defer attributes writing to the set_data tuya command."""
        records = self._write_attr_records(attributes)
        if not records:
            return [[foundation.WriteAttributesStatusRecord(foundation.Status.SUCCESS)]]

        has_change = False
        for record in records:
            attr_name = self.attributes[record.attrid][0]
            if attr_name == "on_off":
                value = record.value.value
                has_change = True

        if has_change:
            return await SiterwellManufClusterSelf.endpoint.tuya_manufacturer.write_attributes(
                {SITERWELL_CHILD_LOCK_ATTR: value}, manufacturer=manufacturer
            )

        return [
            [
                foundation.WriteAttributesStatusRecord(
                    foundation.Status.FAILURE, r.attrid
                )
                for r in records
            ]
        ]

    async def command(
        self,
        command_id: Union[foundation.Command, int, t.uint8_t],
        *args,
        manufacturer: Optional[Union[int, t.uint16_t]] = None,
        expect_reply: bool = True,
        tsn: Optional[Union[int, t.uint8_t]] = None,
    ):
        """Override the default Cluster command."""

        if command_id in (0x0000, 0x0001, 0x0002):
            if command_id == 0x0000:
                value = False
            elif command_id == 0x0001:
                value = True
            else:
                attrid = self.attridx["on_off"]
                success, _ = await self.read_attributes(
                    (attrid,), manufacturer=manufacturer
                )
                try:
                    value = success[attrid]
                except KeyError:
                    return foundation.Status.FAILURE
                value = not value

            (res,) = await self.write_attributes(
                {"on_off": value},
                manufacturer=manufacturer
            )

            return [command_id, res]

        return [command_id, foundation.Status.UNSUP_CLUSTER_COMMAND]

And the updated device classe:

class SiterwellGS361_Type1(TuyaThermostat):
    """SiterwellGS361 Thermostatic radiator valve and clones."""

    def __init__(self, *args, **kwargs):
        """Init device."""
        self.child_lock_bus = Bus()
        super().__init__(*args, **kwargs)

    signature = {
        #  endpoint=1 profile=260 device_type=0 device_version=0 input_clusters=[0, 3]
        #  output_clusters=[3, 25]>
        MODELS_INFO: [
            ("_TYST11_jeaxp72v", "eaxp72v"),
            ("_TYST11_kfvq6avy", "fvq6avy"),
            ("_TYST11_zivfvd7h", "ivfvd7h"),
            ("_TYST11_hhrtiq0x", "hrtiq0x"),
            ("_TYST11_ps5v5jor", "s5v5jor"),
            ("_TYST11_owwdxjbx", "wwdxjbx"),
            ("_TYST11_8daqwrsj", "daqwrsj"),
        ],
        ENDPOINTS: {
            1: {
                PROFILE_ID: zha.PROFILE_ID,
                DEVICE_TYPE: zha.DeviceType.ON_OFF_SWITCH,
                INPUT_CLUSTERS: [Basic.cluster_id, Identify.cluster_id],
                OUTPUT_CLUSTERS: [Identify.cluster_id, Ota.cluster_id],
            }
        },
    }

    replacement = {
        ENDPOINTS: {
            1: {
                PROFILE_ID: zha.PROFILE_ID,
                DEVICE_TYPE: zha.DeviceType.THERMOSTAT,
                INPUT_CLUSTERS: [
                    Basic.cluster_id,
                    Identify.cluster_id,
                    SiterwellManufCluster,
                    SiterwellThermostat,
                    SiterwellUserInterface,
                    TuyaPowerConfigurationCluster,
                ],
                OUTPUT_CLUSTERS: [Identify.cluster_id, Ota.cluster_id],
            },
            2: {
                PROFILE_ID: zha.PROFILE_ID,
                DEVICE_TYPE: zha.DeviceType.ON_OFF_SWITCH,
                INPUT_CLUSTERS: [
                    SiterwellChildLock,
                ],
                OUTPUT_CLUSTERS: [],
            },
        }
    }

I have only changing the type 1 but if you is having one type 2 make the same changes doe that device class and it shall working.

The SITERWELL_VALVE_STATE_ATTR is not implanted in the device and shall being complete removed.
Its have test for adding one switch for Window open on / off but is still not working OK then is not getting the feedback from the state of the switch. Then getting it working also the valve detect on / off shall getting one switch on one own endpoint.
Also Window open and valve jammed shall getting on sensor like Aqara magnet is having but its coming later and is only plus things after getting all other basic function working OK.

Great thanks to @jacekk015 that have making one working code that i have steeling !!
Jacek if you finding some bad / not needed things in the code pleas say so i can fixing it then im not one code wearier.

For user of this TRV and its mode / presets in ZHA:

This TRV is not having any off mode and is always in heating mode but can being sett in away mode (= idle with anti freeze) and its the right way for TRVs (stop and go is for cars !!).

If you like doing automatons for Schedule changes of the setpoint temperature you shall using the presets Schedule for enable / disable the automation. Then if you changing the presets in ZHA or on the TRV to Schedule, the automation is running and if changing away or manual (none) the automation is disabled and the automation is stopping sending update of the setpoint temperature (the TRV is remember the last sett temp in every mode and is recalling it then mode / presets is changed so need taking that in account then making the automation).

5 replies

rforro Nov 5, 2021

You're missing one line of code. Because you never reports the state of child_lock by calling the child_lock_change inside of class SiterwellChildLock(LocalDataCluster, OnOff). Look at jacekk015's code again:

elif attrid == MAXSMART_CHILD_LOCK_ATTR:
            mode = 1 if value else 0
            self.endpoint.device.ui_bus.listener_event(
                "child_lock_change", mode)
            self.endpoint.device.MaxsmartChildLock_bus.listener_event(
                "child_lock_change", mode)

MattWestb Nov 6, 2021
Author

Servos and thanks for the feedback rforro !!
The Siterwell TRV was the first implanted TRV with the Moes and Saswell "all in one" quirk that was not working good for no TRV. The Moes and Saswell have getting there own and the Siterwell is being "left" with old partly crappy code that is not using all functions of the TRV.
I have copy and past little code from Moes for getting the missing function and implanting the presets in ZHA so can using them. This code is i knowing is not working then it can setting the child lock but is not getting the state back so it cant removing the children lock.

jacekk015 is on the way helping fixing the bad things then i have not the knowledge of coding (little more then copy and pace but not much) and i shall trying his new updated code hi was posing in the night.

If all is going well i can throwing the old Siterwell code and getting new nice working one in place with his and perhaps your help.

So pleas keep spamming this discussion with ideas that can helping that we is getting better support for all our TRVs in our systems !!

I shall installing jacekk015 version and see what hi have cooking for good thing in it :-)))

One more time thanks for feed back and keep asking for getting your and our TRV working well and perhaps getting other working better then they do today then more ideas is making it more creative coding !!

rforro Nov 6, 2021

The code is good, you only forget the one line I've mentioned. At first I copied this code in mine zonnsmart and same as you I was only to able lock the child lock, because it never reported locked state. After loooong debugging I've discovered the problem.

Your code:

elif attrid == SITERWELL_CHILD_LOCK_ATTR:
            mode = 1 if value else 0
            self.endpoint.device.ui_bus.listener_event("child_lock_change", mode)

Jaceks/correct code:

elif attrid == MAXSMART_CHILD_LOCK_ATTR:
            mode = 1 if value else 0
            self.endpoint.device.ui_bus.listener_event(
                "child_lock_change", mode)
            self.endpoint.device.MaxsmartChildLock_bus.listener_event(
                "child_lock_change", mode)

Do you see the problem?

jacekk015 Nov 6, 2021

Check the last ZIP below. All was repaired there

MattWestb Nov 6, 2021
Author

It was my copy and past code from the Moes and the first from jacekk015 that i was doing wrong.
Its working great now if you is looking on the last screen shuts and the last updated quirk hi have posted.

I hope you can finding some good functions hi have implanted that you can putting in the ZS quirk for getting more function working in one good was for the users.

Thanks for feed back !!

jacekk015 · 2021-10-22T18:07:23Z

jacekk015
Oct 22, 2021

You don't need that part:

        # if self.endpoint.device.manufacturer == "_TZE200_qc4fpmcn":
        #     ZhaEntity._unique_id_suffix = "test"
        # else:
        #     ZhaEntity._unique_id_suffix = ""

1 reply

MattWestb Oct 22, 2021
Author

It was coming with the code i have steeling but its on the list for deleting like the other #.
The switch and and alarm sensor is left and its working partly, but is needing getting working OK, but the original is not having hem and need doing the commands with cluster commands so its one half step forward.

MattWestb · 2021-10-26T10:31:47Z

MattWestb
Oct 26, 2021
Author

Latest status of changes implanted:

Future changes implanted for the TRV:

Making the quirk using presets Away, Schedule and Manual instead of system mode (the TRV is not supporting on/off its always working)(need adding Siterwell presets in ZHA) and ZHA is not supporting Schedule (Schedule_programming_mode) as system mode only as occupancy presets.
Deleting in device not implanted attribute:
SITERWELL_VALVE_STATE_ATTR = 0x026D # [0,0,0,55] opening percentage
Adding in device supported attribute:
SITERWELL_WINDOW_ALARM_ATTR = 0x0411 # [0] clear [1] alarm
SITERWELL_VALVE_JAMMED_ATTR = 0x0413 # [0] clear [1] alarm
but not in the ZHA GUI (upcoming).
Adding switch for SiterwellChildLock in ZHA GUI but its only working setting.
Adding max and min heating so ZHA is showing the right scale.
Deleting "electric" then is one copy and paste from the original electric heating thermostat that is having one own quirk.

Missing upcoming futures for the TRV:

1. Switches with status update from the local state shall being implanted for window and valve detect.
1. Status sensor for "window is open" and "valve is jammed" shall being implanted.
1. Battery attribute with type and quantity shall being implanted (AA and 2 or 3 batteies for new TRV types).

Away mode is showing idle in ZHA without setpoint temperature but it can being set on the TRV or by cluster attribute.

All good new code is steeled from @jacekk015 and patched with "cut and paste".

1 reply

MattWestb Oct 26, 2021
Author

Using this TRV in ZHA with presets:

This TRV is not having any off mode and is always in heating mode but can being sett in away mode (= idle with anti freeze) and its the right way for TRVs (stop and go is for cars !!).

If you like doing automatons for Schedule changes of the setpoint temperature from HA you shall using the presets mode schedule as one condition for enable / disable the automation scheduling. Then if you changing the presets in ZHA or on the TRV to Schedule, the automation is running and if changing away or manual (none) the automation is disabled and the automation is stopping sending update of the setpoint temperature (the TRV is remember the last sett temp in every mode and is recalling it then mode / presets is changed so need taking that in account then making the automation).

MattWestb · 2021-10-26T12:19:18Z

MattWestb
Oct 26, 2021
Author

Then doing the changes in the quirk its braking the tuya test and i cant fixing that code then its over my head :-((

If like to testing or using it you need adding the follow code in the end of climate.py in ZHA:

@STRICT_MATCH(
    channel_names=CHANNEL_THERMOSTAT,
    manufacturers={
        "_TYST11_jeaxp72v",
        "_TYST11_kfvq6avy",
        "_TYST11_zivfvd7h",
        "_TYST11_hhrtiq0x",
        "_TYST11_ps5v5jor",
        "_TYST11_owwdxjbx",
        "_TYST11_8daqwrsj",
        "_TZE200_jeaxp72v",
        "_TZE200_kfvq6avy",
        "_TZE200_zivfvd7h",
        "_TZE200_hhrtiq0x",
        "_TZE200_ps5v5jor",
        "_TZE200_owwdxjbx",
        "_TZE200_8daqwrsj",
    },
)
class SiterwellThermostat(Thermostat):
    """Siterwell Thermostat implementation."""

    def __init__(self, unique_id, zha_device, channels, **kwargs):
        """Initialize ZHA Thermostat instance."""
        super().__init__(unique_id, zha_device, channels, **kwargs)
        self._presets = [
            PRESET_NONE,
            PRESET_AWAY,
            PRESET_SCHEDULE,
        ]
        self._supported_flags |= SUPPORT_PRESET_MODE

    @property
    def hvac_modes(self) -> tuple[str, ...]:
        """Return only the heat mode, because the device can't be turned off."""
        return (HVAC_MODE_HEAT,)

    async def async_attribute_updated(self, record):
        """Handle attribute update from device."""
        if record.attr_name == "operation_preset":
            if record.value == 0:
                self._preset = PRESET_AWAY
            if record.value == 1:
                self._preset = PRESET_SCHEDULE
            if record.value == 2:
                self._preset = PRESET_NONE
        await super().async_attribute_updated(record)

    async def async_preset_handler(self, preset: str, enable: bool = False) -> bool:
        """Set the preset mode."""
        mfg_code = self._zha_device.manufacturer_code
        if not enable:
            return await self._thrm.write_attributes(
                {"operation_preset": 0}, manufacturer=mfg_code
            )
        if preset == PRESET_AWAY:
            return await self._thrm.write_attributes(
                {"operation_preset": 1}, manufacturer=mfg_code
            )
        if preset == PRESET_SCHEDULE:
            return await self._thrm.write_attributes(
                {"operation_preset": 2}, manufacturer=mfg_code
            )

        return False

Its working great for my but i cant doing more at the moment for getting all functionality in our devices :((

4 replies

serrj-sv Oct 26, 2021

If like to testing or using it you need adding the follow code in the end of climate.py in ZHA:

How can I modify this file in HAOS (Home Assistant OS) without breaking anything? Is it possible to do this using custom_component?

MattWestb Oct 26, 2021
Author

First configuring local quirks and putting the updated quirk it it so its easy.
But for patching the climate.py you need patching in the HA container.
Instruction: #693 and the climate.py is located in the container /usr/src/homeassistant/homeassistant/components/zha/climate.py.

jacekk015 Oct 26, 2021

Take it easy guys. We will put yours Siterwell under development and we will fix missing functions just after I end with that Maxsmart/MoesAlt. Only few days left.

MattWestb Oct 26, 2021
Author

Thanks Jacek !

Then you have getting all working its mush easier only looking how you have done and copy little here and there ;-)

The problem with My quirk is that is in use for 11 months and having many clones out there and if braking it then its being cold in many homes.
There for i was liking getting the first change with presets in place then its must being merged with ZHA update with the same or loosing the control of the TRV and then adding the last fine parts.

The first the Siterwell was added in the first PR and was not getting all love its deserving from the coders then the Moes was more interesting and the Moes have getting one general update and working well and the Siterwell is still only having basic functions implanted but working very well.

I trying getting the tuya TS004F Dimmer switch working with the undocumented mode switching but must making more test and getting the leave with rejoining working in ZHA and also getting ZHA reading the endpoints without resetting the device.

MattWestb · 2021-11-04T19:41:17Z

MattWestb
Nov 4, 2021
Author

Was looking little and if using the automation in HAs climate component and is one very nice schedule custom component that is like many user have starting using.
Then using this software component you can setting all the times you like with different set points and is not locked to the normal tuya TRVs is having (work days plus sat and sundays) but its only working if the system is on line.
https://community.home-assistant.io/t/scheduler-card-custom-component/217458

0 replies

jacekk015 · 2021-11-05T10:34:09Z

jacekk015
Nov 5, 2021

@MattWestb Let's take your Siterwell on the work. You have some attributes documented above. But even that please share the log from reset or re-add of the device to the ZHA.
I would like to see all data coming in and out from TRV.
And tell me an exact ID of your TRV and are you using Site I or Site II

0 replies

MattWestb · 2021-11-05T11:01:58Z

MattWestb
Nov 5, 2021
Author

Device signature:


  "node_descriptor": "NodeDescriptor(logical_type=<LogicalType.EndDevice: 2>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress: 128>, manufacturer_code=0, maximum_buffer_size=82, maximum_incoming_transfer_size=255, server_mask=11264, maximum_outgoing_transfer_size=255, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=True, *is_full_function_device=False, *is_mains_powered=False, *is_receiver_on_when_idle=False, *is_router=False, *is_security_capable=False)",
  "endpoints": {
    "1": {
      "profile_id": 260,
      "device_type": "0x0301",
      "in_clusters": [
        "0x0000",
        "0x0001",
        "0x0003",
        "0x0201",
        "0x0204",
        "0xef00"
      ],
      "out_clusters": [
        "0x0003",
        "0x0019"
      ]
    },
    "2": {
      "profile_id": 260,
      "device_type": "0x0000",
      "in_clusters": [
        "0x0006"
      ],
      "out_clusters": []
    }
  },
  "manufacturer": "_TYST11_kfvq6avy",
  "model": "fvq6avy",
  "class": "ts0601_trv.SiterwellGS361_Type1"

Battery out and in:

2021-11-05 11:53:56 INFO (MainThread) [zigpy.application] Device 0xa620 (bc:33:ac:ff:fe:03:db:c1) joined the network
2021-11-05 11:53:56 INFO (MainThread) [zigpy.application] Device 0xa620 (bc:33:ac:ff:fe:03:db:c1) joined the network
2021-11-05 11:53:56 INFO (MainThread) [bellows.zigbee.application] ZDO Device announce: 0xa620, bc:33:ac:ff:fe:03:db:c1
2021-11-05 11:53:56 INFO (MainThread) [zigpy.application] Device 0xa620 (bc:33:ac:ff:fe:03:db:c1) joined the network
2021-11-05 11:53:56 DEBUG (MainThread) [zigpy.zdo] [0xa620:zdo] ZDO request ZDOCmd.Device_annce: [0xA620, bc:33:ac:ff:fe:03:db:c1, 128]
2021-11-05 11:54:04 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [2] for attribute 0x0404 (command 0x0001)
2021-11-05 11:54:05 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [0, 0, 0, 210] for attribute 0x0202 (command 0x0001)
2021-11-05 11:54:06 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [0, 0, 0, 210] for attribute 0x0202 (command 0x0001)
2021-11-05 11:54:07 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [1] for attribute 0x0112 (command 0x0001)
2021-11-05 11:54:07 ERROR (MainThread) [bellows.ezsp] Exception running handler
Traceback (most recent call last):
  File "/usr/local/lib/python3.9/site-packages/bellows/ezsp/__init__.py", line 301, in handle_callback
    handler(*args)
  File "/usr/local/lib/python3.9/site-packages/bellows/zigbee/application.py", line 242, in ezsp_callback_handler
    self._handle_frame(*args)
  File "/usr/local/lib/python3.9/site-packages/bellows/zigbee/application.py", line 297, in _handle_frame
    self.handle_message(
  File "/usr/local/lib/python3.9/site-packages/zigpy/application.py", line 214, in handle_message
    return sender.handle_message(
  File "/usr/local/lib/python3.9/site-packages/zigpy/device.py", line 354, in handle_message
    return endpoint.handle_message(
  File "/usr/local/lib/python3.9/site-packages/zigpy/endpoint.py", line 210, in handle_message
    handler(hdr, args, dst_addressing=dst_addressing)
  File "/usr/local/lib/python3.9/site-packages/zigpy/zcl/__init__.py", line 205, in handle_message
    self.handle_cluster_request(hdr, args, dst_addressing=dst_addressing)
  File "/usr/local/lib/python3.9/site-packages/zhaquirks/tuya/__init__.py", line 370, in handle_cluster_request
    self._update_attribute(tuya_cmd, zvalue)
  File "/config/custom_zha_quirks/ts0601_trv.py", line 86, in _update_attribute
    self.endpoint.device.window_detection_bus.listener_event(
AttributeError: 'SiterwellGS361_Type1' object has no attribute 'window_detection_bus'
2021-11-05 11:54:08 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [1] for attribute 0x0114 (command 0x0001)
2021-11-05 11:54:09 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [1] for attribute 0x0114 (command 0x0001)
2021-11-05 11:54:10 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [1] for attribute 0x0114 (command 0x0001)
2021-11-05 11:54:10 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [0] for attribute 0x0107 (command 0x0001)
2021-11-05 11:54:11 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [0] for attribute 0x0107 (command 0x0001)
2021-11-05 11:54:13 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [0] for attribute 0x0411 (command 0x0001)
2021-11-05 11:54:16 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [0] for attribute 0x0413 (command 0x0001)
2021-11-05 11:54:17 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [0, 0, 1, 4] for attribute 0x0203 (command 0x0001)
2021-11-05 11:54:18 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [0, 0, 0, 100] for attribute 0x0215 (command 0x0001)
2021-11-05 11:54:23 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [3] for attribute 0x0404 (command 0x0001)
2021-11-05 11:54:23 WARNING (MainThread) [zigpy.util] Error calling listener.mode_change: local variable 'prog_mode' referenced before assignment
2021-11-05 11:54:33 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [2] for attribute 0x0404 (command 0x0001)

I think i have not deleting all handles from some steeled code that is not working OK and getting errors :-(

1 reply

MattWestb Nov 5, 2021
Author

Sorry i was looking in the log to fast so all was not in and missed the calibrating after power reset and the battery reporting:

2021-11-05 11:54:59 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [0, 0, 1, 7] for attribute 0x0203 (command 0x0001)
2021-11-05 11:55:54 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [0, 0, 0, 96] for attribute 0x0215 (command 0x0001)
2021-11-05 12:02:40 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [0, 0, 0, 220] for attribute 0x0202 (command 0x0001)
2021-11-05 12:02:44 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [0] for attribute 0x0404 (command 0x0001)
2021-11-05 12:02:45 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [1] for attribute 0x0404 (command 0x0001)
2021-11-05 12:02:46 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [1] for attribute 0x0404 (command 0x0001)

jacekk015 · 2021-11-05T11:18:42Z

jacekk015
Nov 5, 2021

You have Window detect enabled?? Or [1] means disabled, [0] enabled

2021-11-05 11:54:07 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [1] for attribute 0x0112 (command 0x0001)

Valve detect switch - what does it mean? What does it do or show? Heating???

2021-11-05 11:54:08 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [1] for attribute 0x0114 (command 0x0001)

How does this work?? Alarm comes after some time or how??
0x0411 (1041) Window open alarm (depends on 0x0112) not implanted. 0 = OK 1 = Alarm
0x0413 (1043) Valve jammed alarm (depend on 0x0114) not implanted. 0 = OK 1 = Alarm

This file shows 8 attributes your 1 post shows 9 attributes
https://github.com/zigpy/zha-device-handlers/blob/dev/zhaquirks/tuya/ts0601_trv.py#L28

Your post is missing:
SITERWELL_VALVE_STATE_ATTR = 0x026D # [0,0,0,55] opening percentage

You show this attributes, and they not:
0x0411 (1041) Window open alarm (depends on 0x0112) not implanted. 0 = OK 1 = Alarm
0x0413 (1043) Valve jammed alarm (depend on 0x0114) not implanted. 0 = OK 1 = Alarm

Besides, if you switch to Schedule, Manual modes does target temperature is always at the same attribute??
0x0202 (514) Target temp
My TRV has different attributes for Schedule temp and Manual temp targets.

Are there any other attributes? What about Away mode??? I don't see nothing.

0 replies

MattWestb · 2021-11-05T12:07:21Z

MattWestb
Nov 5, 2021
Author

Window detection 0 = disabled (no window in the display) 1 = enabled (Window in the display)
Valve detect 0 = disable 1 = enabled no shown on the device. If putting the temperature higher and the valve cant getting to the temperature after some time you is getting one ! in the display and the alarm "valve jammed". Resetting with writing the attribute 0 and then 1 and the alarm is retested.

The original implementation was having valve state and temperature calibration but its not implanted in the device (what i knowing) so i have deleting them in my version but they is in the normal ZHA quirk.

The "alarms" i have only implanted from the device and not to ZHA then i was not finding one working way to do that (until yesterday evening) so not expose in ZHA but like to have.

The device is only using one setpoint temperature but is remember it then changing mode.
Example: Away = 5.0°, Schedule = 18.0° and Manual 22.0° is set in the TRV.
If selecting Away mode (on the TRV or with ZHA) its displaying 5.0° on the trv and ZHA is updating its setpoint (for Away is not true its getting the new one but showing idle but its OK) and if selecting Schedule its showing 18.0° and reporting it to ZHA. and can being changed on the TRV or in ZHA and working OK.
The same with manual mode swishing mode and setting setpoint temp is working OK and is remembered and reported by the TRV.

I think you shall see this TRV as one local working TRV that is getting extra functions from the host system like Schedule can being sent in one automation and enabling it if the TRV is in Schedule mode and then sending new setpoints to the TRV on times you have defined in your automation.

Draw back of the TRV is no valve state (opening %) reported and no calibration = can getting the device reporting often then every 55 minutes if not sending new setpoint or changing mode.

Good on the device is good working basic functions and if not making some strange automatons all can being done easy on the device (not the valve detect) and working if your host system is offline.

Missing future in ZHA: Switch for window open on / off and valve detect.
Sensor for window is open and valve is jammed.

The rest is working OK but perhaps not good coded then i have copy adapting some without knowing how its working.

One thing is if restarting HA the presets is not real remember of ZHA and is showing "none" until changing mode on the device or in ZHA then its being in sync.

I hope i have explaining all right but asking if its somthing you need getting cleared.

1 reply

MattWestb Nov 5, 2021
Author

I was finding some fragments of my battery patch and have putting it together as one working class and adding it in the quirk:

class TuyaPowerConfigurationCluster2AA(TuyaPowerConfigurationCluster):
    """PowerConfiguration cluster for battery-operated TRVs with 2 AA."""

    BATTERY_SIZES = 0x0031
    BATTERY_RATED_VOLTAGE = 0x0034
    BATTERY_QUANTITY = 0x0033

    _CONSTANT_ATTRIBUTES = {
        BATTERY_SIZES: 3,
        BATTERY_RATED_VOLTAGE: 15,
        BATTERY_QUANTITY: 2,
    }

And adding the class in the replacement and is getting some extra static battery attributes.

Its coming new TRVs with 3+AA so its easy making on fix for that but i dont knowing if it shall being implemented in tuya INIT or i the quirk but i think it shall in the INIT then more quirks can using it.

For testing read the attribute ones and then you have some extra info on the battery sensor of the device.

jacekk015 · 2021-11-05T22:36:19Z

jacekk015
Nov 5, 2021

@MattWestb Check the attached quirk. Best would be to re-add the device to ZHA.
ts0601_trv_siterwell.py.zip

One thing to clarify.
Does your TRV don't have VALVE STATE attribute??

SITERWELL_VALVE_STATE_ATTR = 0x026D  # [0,0,0,55] opening percentage

because I see that the code sets the Heat/Idle states using that attribute

        elif attrid == SITERWELL_VALVE_STATE_ATTR:
            self.endpoint.device.thermostat_bus.listener_event(
                "state_change", value)

for my TRV I've cheated a little bit. GUI shows Heat when target temp > room temp.
I do not have VALVE_STATE also.

4 replies

MattWestb Nov 6, 2021
Author

Thanks very much jacekk015 i taking one shut and testing it on my small test system after i have getting breakfast done !!

I think the SITERWELL_VALVE_STATE_ATTR and the calibration is somthing that was misunderstanding in the first implementation and is soeming from the Moes and / or Saswell TRV and have never working on my Siterwell TRVs. I have never seen it being reported and also not then resetting the TRVs MCU by taking the battery out so i thing both not implanted at all in the "hardware" (wrong its in the software) so i have finding better taking both away and have reading both Z2M and deCONZ have the same problem its not using this attribute but is being implanted (very likely imported from Z2M from the beginning).

I reporting back then i have testing little :-))

MattWestb Nov 6, 2021
Author

I think one missing reference:

  File "/config/custom_zha_quirks/ts0601_trv_siterwell.py", line 57, in __init__
    self.endpoint.device.MaxsmartManufCluster_bus.add_listener(self)
AttributeError: 'SiterwellGS361_Type1' object has no attribute 'MaxsmartManufCluster_bus'

I have looking but i dont knowing how to fixing it :-((

jacekk015 Nov 6, 2021

Relax. Let me eat a breakfast :-)

MattWestb Nov 6, 2021
Author

mieć smaczny posiłek !!

jacekk015 · 2021-11-06T09:32:18Z

jacekk015
Nov 6, 2021

My mistake. Copy&paste needs more attention.
Try this below:
I've removed VALVE STATE and steer the state according to temp difference.
Heat - target temp >= room temp
Idle - target temp < room temp
ts0601_trv_siterwell.py.zip

11 replies

jacekk015 Nov 6, 2021

For temperature update try this
Go to device, and then Cluster Management.
Choose SiterwellManufCluster and then attribute "temperature".

Click "Get zigbee attribute", value should be filled
Click "Set zigbee attribute"
Again "Get zigbee attribute"
Does the value updates? If yes, your room temperature on the TRV should also update.

MattWestb Nov 6, 2021
Author

Fast test update from the freezer:

2021-11-06 11:38:57 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [0, 0, 0, 245] for attribute 0x0202 (command 0x0002)
2021-11-06 11:38:57 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [0, 0, 0, 245] for attribute 0x0202 (command 0x0001)
2021-11-06 11:41:08 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [0, 0, 0, 242] for attribute 0x0203 (command 0x0001)
2021-11-06 11:42:09 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [0, 0, 0, 228] for attribute 0x0203 (command 0x0001)
2021-11-06 11:43:13 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [0, 0, 0, 211] for attribute 0x0203 (command 0x0001)
2021-11-06 11:44:14 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [0, 0, 0, 195] for attribute 0x0203 (command 0x0001)
2021-11-06 11:45:17 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [0, 0, 0, 178] for attribute 0x0203 (command 0x0001)
2021-11-06 11:46:07 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [1] for attribute 0x0411 (command 0x0001)

And HA is showing:

So 8 minutes in minus 20°C its sending the alarm and ZHA is showing it nicely !!

Im 110% sure the cluster attributes is working then its the same handles ZHA is using and its no need for my to changing the temperature but it good for user to knowing how to do that then the presets in implanted (before it was possible in ZHA GUI but its better with presets).

Ops I must renaming the last sensor !!

jacekk015 Nov 6, 2021

Have you tried temp update above example???

What about your second TRV?? If I remember correct you have another model.

MattWestb Nov 6, 2021
Author

Then get temperature ZHA is using the cashed value and the TRV is reporting if the temperature have being changed more then 1° or 55 (or 60) minutes if no changes have being made.
From the log then testing get and set (no updates then doing the get or set attribute in the log):

2021-11-06 12:09:38 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [0, 0, 0, 186] for attribute 0x0203 (command 0x0001)
2021-11-06 12:14:29 DEBUG (MainThread) [zhaquirks.tuya] [0xa620:1:0xef00] Received value [0, 0, 0, 196] for attribute 0x0203 (command 0x0001)

The quirk is (or cant) requesting the temperature from the device.
The Moes and some other is using sending local temperature calibrating (with or not updated offset) from HA automation for triggering the TRV sending one new temperature for getting nicer log.

Looks nicer with custom icons !!

No i only having one version of TRVs but i have trying helping all user that having different ones getting them supported and all function implanted and working in the devices.

Its only one little cosmetic thing:
The presets 0x03 - 0x06 can being deleted then its have no use.
The TRV have one 4 rd "operating mode" (0x03) that can being triggered on the TRV or by cluster commands and its the FI mode for installing the TRV.
If entering install mode the quirk is not like it and ZHA is not supporting it.
I think its better defining it in the quirk and also in ZHA so the user can see that the TRV is in install mode but shall not possible selecting it as mode in the preset list in ZHA.
Is that possible doing that ?
I shall looking in the climate.py if it somthing that can being used.

What i can see is all functions working 100% but need more testing for see if its some small things but i dont believe that then the basic function is rock solid !!

MattWestb Nov 6, 2021
Author

Now the ZHA history is showing right if the TRV is heating or is being idle (by calculation) and looks very nice !!
Before it was always showing heating in the history GUI.

Then the temperature is stabilized (after its warming up from the freezer) is reporting one time every 55 or 60 minutes if not temperature have being changed more then 1° but that we can changing on this device.

I think i must putting the new quirk in my production system !!!

MattWestb · 2021-11-06T11:56:54Z

MattWestb
Nov 6, 2021
Author

I have one more Principe question.
Do you like putting all TRVs we is currently having in the ts0601_trv.py (all tuya TRV exclude the Sas that have its own that i dont knowing the sate of) with your and the updated Sitewell or do you like having one for etch type in separate quirk files (splitting the original quirk) ?

I think both is ways is OK, i only dont like the Sass is having one other that is not like the "normal" ones but its (or shall) not our problem for the moment.

13 replies

MattWestb Nov 7, 2021
Author

PR for ZHA support is made home-assistant/core#59289 and waiting for being merged if all test is going well :-))

MattWestb Nov 7, 2021
Author

Updating the PR with credit to @jacekk015 !!!

MattWestb Nov 7, 2021
Author

I have putting in some dock strings so that test is working OK ans all other 2 but the the CI dont like its no test for the new quirk so its not passing and that i dont have the knowledge of :-((

jacekk015 Nov 7, 2021

I'v seen that. I'm not using Github daily for programming so I can't help with those Test creation.
The code is nothing new - just copy&paste for different TRV, it should be merged.
It would be a big lost to not publish it.

MattWestb Nov 7, 2021
Author

I knowing but i have doing all i can and you have doing one great work getting all things in place !!!

Perhaps some user with code experience can doing the test code so it can being merged.
At least users can downloading the working quirk from the PR and using it then the ZHA patch is merged.

I shall changing the status in the tuya matrix that all TRVs is waiting merging PR and and is working OK and i shall doing the functions in the devices is working / missing but its one day tomorrow.

Its only 14 TRV types (inclusive Siterwell) that is getting more or less all function implanted or updated to full working status :-)))))))

MattWestb · 2021-11-08T13:22:45Z

MattWestb
Nov 8, 2021
Author

Testing TRV functions for getting the right sensor named.

Siterwell have window open and valve jammed alarms that can being activated or not.
If activated the window symbol is shown in the device display and for valve is not indicator but the state is showing OK in ZHA if finding the right switch for it.

For getting the TRV failing valve detecting is easiest having the valve on the table and putting the setpoing some degree over its measured one so it start working and waiting for the temperature rising that is not doing. After some time its giving up and you is getting one ! in the device display and its is sending the attribute valve is jammed.

Valve jammed alarm with custom icon but its not changing intensity like the standard for sensor is doing.

For resting it you must putting the setpoint under the local temperature and disabling valve detect and then enabling valve detect and the ! is going away in the display and you is getting one normal attribute sent for valve jammed.

@jacekk015 was testing the Window open by putting one TRV outside but it was not working OK and putting it the freezer it was trigger the function and sending the attribute.
I have using the freezer before and i have working good.
But i was doing the same test moving one TRV from my living room to the balcony and the temperature was falling but not fast enough and after round 30 minutes i was putting it in the freezer and then it was sending the alarm very fast:

Over the night was valve detect test with jammed alarm that was fixed around 11.50 then the balcony for 30 minutes and then the freezer for 15 minutes after one restart of my test system (the not reported minutes).

On thing is if the temperature is not falling fast enough the window open is not being triggered but is looks then its coming later as one antifreeze alarm then the temperature is coming around 5° C if lowering slowly in my first experiment.

1 reply

MattWestb Nov 8, 2021
Author

For finding the right switches and sensors is not so easy then we cant sending any description to ZHA from the quirk for the moment.

My TRV have this End Points and with functions:
EP1 Window detection switch
EP2 Valve detection switch
EP3 Window open alarm sensor
EP4 Valve jammed sensor
EP5 Children lock switch
EP5 FI Mode switch

If not renaming them its possible finding the endpoint in the end of the name but i cant guarantee that is always OK.

I was doing like that: giving all one short name that is easy to reconciling.
Open the open your config_folder\.storage\core.entity_registry with one editor.
Finding the TRVs entries for the switches and sensors looks like this:

            {
                "entity_id": "binary_sensor.tyst11_trv_binary_input_2",
                "config_entry_id": "1509216dc5c6aac3464ac35895885f7b",
                "device_id": "7df68ce87c4cfb9d53977ad258bd9b83",
                "area_id": null,
                "unique_id": "bc:33:ac:ff:fe:03:db:c1-4-15",
                "platform": "zha",
                "name": "TYST11 TRV binary_input",
                "icon": null,
                "disabled_by": null,
                "capabilities": null,
                "supported_features": 0,
                "device_class": null,
                "unit_of_measurement": null,
                "original_name": "_TYST11_kfvq6avy fvq6avy c1db03fe binary_input",
                "original_icon": null,
                "entity_category": null
            },
            {
                "entity_id": "switch.tyst11_trv_on_off",
                "config_entry_id": "1509216dc5c6aac3464ac35895885f7b",
                "device_id": "7df68ce87c4cfb9d53977ad258bd9b83",
                "area_id": null,
                "unique_id": "bc:33:ac:ff:fe:03:db:c1-1-6",
                "platform": "zha",
                "name": "TYST11 TRV on_off",
                "icon": null,
                "disabled_by": null,
                "capabilities": null,
                "supported_features": 0,
                "device_class": null,
                "unit_of_measurement": null,
                "original_name": "_TYST11_kfvq6avy fvq6avy c1db03fe on_off",
                "original_icon": null,
                "entity_category": null
            },

If you have changing name you finding it in the field "name" or look in the field "entity_id" that you is also finding in the entry property as "Entry ID".
Now we must looking on this string: "unique_id": "bc:33:ac:ff:fe:03:db:c1-1-6"
First is the IEEE of the device and then end point number and the last is the cluster number so this is EP1 with function 6 = OnOff switch = Window detection switch from the first table with functions in the device.
And the "unique_id": "bc:33:ac:ff:fe:03:db:c1-4-15" is saying EP 4 and binary input = Valve jammed sensor.

Its possible changing the name in the file and restarting but i think it better making it in the ZHA GIU for normal users.

If all is going well you have finding all functions on your device endpoints and witch sensor and switches there belong so you can naming them right.

Hopefully we can getting one function sending named from quirks to ZHA but its not implanted yet but PR is made for doing that.

jacekk015 · 2021-11-21T13:02:04Z

jacekk015
Nov 21, 2021

Temp calibration repaired - I've forgot that bus returns List, not value
ts0601_trv_siterwell.py.zip

Give me long time DEBUG logs from the moment before switch enabled to enabling and disabling time.
I need a bigger view.
It's not possible that I do write_attribute command and ZHA does nothing.
[edit]
BTW I've bought 10pcs of MS-SH4-Z TRV's for cheap money
https://allegro.pl/oferta/glowica-termostatyczna-awow-10-szt-11407902831
About 170 EUR for 10pcs

3 replies

MattWestb Nov 21, 2021
Author

17€ / TRV is very good price !!!

I have this as log in HA:

logger:
  default: info
  logs:
    homeassistant.core: info
    homeassistant.components.zha: debug
    zigpy: debug
#    zigpy.zdo: debug
#    zigpy.zcl: debug
#    zigpy.application: debug
#    zigpy.ota: debug
#    bellows: debug
#    bellows.ezsp: debug
#    bellows.ezsp.protocol: debug
#    bellows.zigbee.application: debug
#    bellows.uart: debug
#    zigpy_cc: debug 
#    zigpy_deconz.zigbee.application: debug
#    zigpy_deconz.api: debug
#    zigpy_xbee.zigbee.application: debug
#    zigpy_xbee.api: debug
#    zigpy_zigate: debug
    zhaquirks: debug

Do i need putting in more ?

jacekk015 Nov 21, 2021

I have

logger:
  default: info
  logs:
    homeassistant.components.zha: debug
    zigpy: debug
    zhaquirks: debug
    ts0601_trv_maxsmart: debug

So you need to add your filename

logger:
  default: info
  logs:
    homeassistant.components.zha: debug
    zigpy: debug
    zhaquirks: debug
    ts0601_trv_siterwell: debug

[edit]
Was looking on Aliexpress for TRV's for some long time, and cheapest was about 110PLN ~23,50EUR
With possible customs costs.
This package will arrive on Wednesday and shipping will be free.

MattWestb Nov 21, 2021
Author

AI shall being with custom fees now (from the summer) but if shipping from CH its take 6-8 weeks !!
And the PL is normally cheaper the AI shipped from EU and in AT is normal DPD that doing the delivery and they have throwing 2 packages in the wrong mailbox and i must paying for the product and not getting any then i cant getting any paper from the post office (then DPD is the Currier).
AI delivery ES. FR. CHZ and PL is good if they is not using DPD but not easy finding on AI.

Back to dream coding !!
Local temp 24.9°
Correction + 0.9°
Setpoint 25.9° -> heating
Setpoint 25.8° -> idle
So looks working as expected !!
I have not testing negative correction but coming later.

i was not knowing but was thinking that zhaquirks was enough for getting all debugs from the quirk so i putting in your setting and restarting HA.

Great thanks for fixing my beloved old bad TRVs !!!

MattWestb · 2021-11-21T13:54:12Z

MattWestb
Nov 21, 2021
Author

Debug looks working OK now.
Little patched log:

2021-11-21 14:42:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:5:0x0006]: executed 'off' command with args: '()' kwargs: '{}' result: [0, [WriteAttributesStatusRecord(status=<Status.SUCCESS: 0>)]]
2021-11-21 14:42:27 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=54 command_id=2>
2021-11-21 14:42:27 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0002: [Command(status=0, tsn=37, command_id=263, function=0, data=[1, 0])]
2021-11-21 14:42:27 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0] for attribute 0x0107 (command 0x0002)
2021-11-21 14:42:28 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=55 command_id=1>
2021-11-21 14:42:28 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0001: [Command(status=5, tsn=74, command_id=263, function=0, data=[1, 0])]
2021-11-21 14:42:28 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0] for attribute 0x0107 (command 0x0001)
2021-11-21 14:42:33 DEBUG (MainThread) [ts0601_trv_siterwell] MattWestb (= I wish i was one MS-SH4-Z)
2021-11-21 14:42:37 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:5:0x0006]: executed 'on' command with args: '()' kwargs: '{}' result: [1, [WriteAttributesStatusRecord(status=<Status.SUCCESS: 0>)]]
2021-11-21 14:42:37 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=56 command_id=2>
2021-11-21 14:42:37 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0002: [Command(status=0, tsn=43, command_id=263, function=0, data=[1, 1])]
2021-11-21 14:42:37 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [1] for attribute 0x0107 (command 0x0002)
2021-11-21 14:42:38 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=57 command_id=1>
2021-11-21 14:42:38 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0001: [Command(status=5, tsn=75, command_id=263, function=0, data=[1, 1])]
2021-11-21 14:42:38 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [1] for attribute 0x0107 (command 0x0001)
2021-11-21 14:44:14 DEBUG (MainThread) [ts0601_trv_siterwell] MattWestb (= I wish i was one MS-SH4-Z)
2021-11-21 14:44:18 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:5:0x0006]: executed 'off' command with args: '()' kwargs: '{}' result: [0, [WriteAttributesStatusRecord(status=<Status.SUCCESS: 0>)]]
2021-11-21 14:44:18 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=58 command_id=2>
2021-11-21 14:44:18 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0002: [Command(status=0, tsn=49, command_id=263, function=0, data=[1, 0])]
2021-11-21 14:44:18 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0] for attribute 0x0107 (command 0x0002)
2021-11-21 14:44:18 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=59 command_id=1>
2021-11-21 14:44:18 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0001: [Command(status=5, tsn=76, command_id=263, function=0, data=[1, 0])]
2021-11-21 14:44:18 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0] for attribute 0x0107 (command 0x0001)
2021-11-21 14:44:23 DEBUG (MainThread) [ts0601_trv_siterwell] MattWestb (= I wish i was one MS-SH4-Z)
2021-11-21 14:44:28 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:5:0x0006]: executed 'on' command with args: '()' kwargs: '{}' result: [1, [WriteAttributesStatusRecord(status=<Status.SUCCESS: 0>)]]
2021-11-21 14:44:28 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=60 command_id=2>
2021-11-21 14:44:28 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0002: [Command(status=0, tsn=55, command_id=263, function=0, data=[1, 1])]
2021-11-21 14:44:28 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [1] for attribute 0x0107 (command 0x0002)
2021-11-21 14:44:29 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=61 command_id=1>
2021-11-21 14:44:29 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0001: [Command(status=5, tsn=77, command_id=263, function=0, data=[1, 1])]
2021-11-21 14:44:29 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [1] for attribute 0x0107 (command 0x0001)
2021-11-21 14:44:34 DEBUG (MainThread) [ts0601_trv_siterwell] MattWestb (= I wish i was one MS-SH4-Z)
2021-11-21 14:44:38 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:5:0x0006]: executed 'off' command with args: '()' kwargs: '{}' result: [0, [WriteAttributesStatusRecord(status=<Status.SUCCESS: 0>)]]
2021-11-21 14:44:38 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=62 command_id=2>
2021-11-21 14:44:38 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0002: [Command(status=0, tsn=61, command_id=263, function=0, data=[1, 0])]
2021-11-21 14:44:38 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0] for attribute 0x0107 (command 0x0002)
2021-11-21 14:44:39 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=63 command_id=1>
2021-11-21 14:44:39 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0001: [Command(status=5, tsn=78, command_id=263, function=0, data=[1, 0])]
2021-11-21 14:44:39 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0] for attribute 0x0107 (command 0x0001)
2021-11-21 14:44:40 DEBUG (MainThread) [ts0601_trv_siterwell] MattWestb (= I wish i was one MS-SH4-Z)
2021-11-21 14:44:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:5:0x0006]: executed 'on' command with args: '()' kwargs: '{}' result: [1, [WriteAttributesStatusRecord(status=<Status.SUCCESS: 0>)]]
2021-11-21 14:44:41 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=64 command_id=2>
2021-11-21 14:44:41 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0002: [Command(status=0, tsn=67, command_id=263, function=0, data=[1, 1])]
2021-11-21 14:44:41 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [1] for attribute 0x0107 (command 0x0002)
2021-11-21 14:44:42 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=65 command_id=1>
2021-11-21 14:44:42 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0001: [Command(status=5, tsn=79, command_id=263, function=0, data=[1, 1])]
2021-11-21 14:44:42 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [1] for attribute 0x0107 (command 0x0001)

I think its not possible tricking the Site TRVs but i think its not one large problem they is reporting every 55 min (or it was 60) and if the temperature is changing one °.

10 replies

MattWestb Nov 22, 2021
Author

2021-11-22 19:39:22 DEBUG (MainThread) [ts0601_trv_siterwell] MattWestb
2021-11-22 19:39:22 DEBUG (MainThread) [ts0601_trv_siterwell] MattWestb target_temp 209
2021-11-22 19:39:26 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=3 command_id=2>
2021-11-22 19:39:26 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0002: [Command(status=0, tsn=25, command_id=514, function=0, data=[4, 0, 0, 0, 209])]
2021-11-22 19:39:26 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0, 0, 0, 209] for attribute 0x0202 (command 0x0002)
2021-11-22 19:39:26 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:26 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:26 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:26 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:26 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:26 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:26 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:26 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:26 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:26 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:26 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:26 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:26 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:26 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:26 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:26 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:26 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:26 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:26 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:26 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:26 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=4 command_id=2>
2021-11-22 19:39:26 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0002: [Command(status=0, tsn=25, command_id=514, function=0, data=[4, 0, 0, 0, 209])]
2021-11-22 19:39:26 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0, 0, 0, 209] for attribute 0x0202 (command 0x0002)
2021-11-22 19:39:26 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:26 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:27 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=5 command_id=2>
2021-11-22 19:39:27 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0002: [Command(status=0, tsn=25, command_id=514, function=0, data=[4, 0, 0, 0, 209])]
2021-11-22 19:39:27 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0, 0, 0, 209] for attribute 0x0202 (command 0x0002)
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:27 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=6 command_id=2>
2021-11-22 19:39:27 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0002: [Command(status=0, tsn=25, command_id=514, function=0, data=[4, 0, 0, 0, 209])]
2021-11-22 19:39:27 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0, 0, 0, 209] for attribute 0x0202 (command 0x0002)
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:27 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=7 command_id=1>
2021-11-22 19:39:27 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0001: [Command(status=5, tsn=164, command_id=514, function=0, data=[4, 0, 0, 0, 209])]
2021-11-22 19:39:27 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0, 0, 0, 209] for attribute 0x0202 (command 0x0001)
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:27 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:5:0x0006]: executed 'off' command with args: '()' kwargs: '{}' result: [0, [WriteAttributesStatusRecord(status=<Status.SUCCESS: 0>)]]
2021-11-22 19:39:28 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=8 command_id=2>
2021-11-22 19:39:28 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0002: [Command(status=5, tsn=164, command_id=263, function=0, data=[1, 0])]
2021-11-22 19:39:28 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0] for attribute 0x0107 (command 0x0002)
2021-11-22 19:39:28 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=9 command_id=1>
2021-11-22 19:39:28 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0001: [Command(status=5, tsn=165, command_id=263, function=0, data=[1, 0])]
2021-11-22 19:39:28 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0] for attribute 0x0107 (command 0x0001)
2021-11-22 19:39:30 DEBUG (MainThread) [ts0601_trv_siterwell] MattWestb
2021-11-22 19:39:30 DEBUG (MainThread) [ts0601_trv_siterwell] MattWestb target_temp 209
2021-11-22 19:39:30 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=10 command_id=2>
2021-11-22 19:39:30 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0002: [Command(status=0, tsn=36, command_id=514, function=0, data=[4, 0, 0, 0, 209])]
2021-11-22 19:39:30 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0, 0, 0, 209] for attribute 0x0202 (command 0x0002)
2021-11-22 19:39:30 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:30 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:30 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:30 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:30 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:30 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:30 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:30 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:30 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:30 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:30 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:30 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:30 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:30 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:30 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:30 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:30 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:30 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:30 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:30 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:31 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=11 command_id=1>
2021-11-22 19:39:31 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0001: [Command(status=5, tsn=166, command_id=514, function=0, data=[4, 0, 0, 0, 209])]
2021-11-22 19:39:31 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0, 0, 0, 209] for attribute 0x0202 (command 0x0001)
2021-11-22 19:39:31 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:31 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:31 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:31 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:31 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:31 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:31 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:31 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:31 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:31 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:31 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:31 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:31 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:31 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:31 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:31 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:31 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:31 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:31 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:31 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:31 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:5:0x0006]: executed 'on' command with args: '()' kwargs: '{}' result: [1, [WriteAttributesStatusRecord(status=<Status.SUCCESS: 0>)]]
2021-11-22 19:39:32 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=12 command_id=2>
2021-11-22 19:39:32 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0002: [Command(status=5, tsn=166, command_id=263, function=0, data=[1, 1])]
2021-11-22 19:39:32 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [1] for attribute 0x0107 (command 0x0002)
2021-11-22 19:39:32 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=13 command_id=1>
2021-11-22 19:39:32 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0001: [Command(status=5, tsn=167, command_id=263, function=0, data=[1, 1])]
2021-11-22 19:39:32 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [1] for attribute 0x0107 (command 0x0001)
2021-11-22 19:39:35 DEBUG (MainThread) [ts0601_trv_siterwell] MattWestb
2021-11-22 19:39:35 DEBUG (MainThread) [ts0601_trv_siterwell] MattWestb target_temp 209
2021-11-22 19:39:39 DEBUG (MainThread) [zigpy.device] [0x70e3] Delivery error for seq # 0x2c, on endpoint id 1 cluster 0xef00: message send failure
2021-11-22 19:39:39 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:5:0x0006]: command failed: 'off' args: '()' kwargs '{}' exception: '[0x70e3:1:0xef00]: Message send failure'
2021-11-22 19:39:41 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=14 command_id=2>
2021-11-22 19:39:41 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0002: [Command(status=0, tsn=44, command_id=514, function=0, data=[4, 0, 0, 0, 209])]
2021-11-22 19:39:41 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0, 0, 0, 209] for attribute 0x0202 (command 0x0002)
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:41 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=15 command_id=2>
2021-11-22 19:39:41 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0002: [Command(status=0, tsn=44, command_id=514, function=0, data=[4, 0, 0, 0, 209])]
2021-11-22 19:39:41 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0, 0, 0, 209] for attribute 0x0202 (command 0x0002)
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:41 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=16 command_id=2>
2021-11-22 19:39:41 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0002: [Command(status=0, tsn=44, command_id=514, function=0, data=[4, 0, 0, 0, 209])]
2021-11-22 19:39:41 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0, 0, 0, 209] for attribute 0x0202 (command 0x0002)
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:41 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=17 command_id=2>
2021-11-22 19:39:41 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0002: [Command(status=0, tsn=44, command_id=514, function=0, data=[4, 0, 0, 0, 209])]
2021-11-22 19:39:41 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0, 0, 0, 209] for attribute 0x0202 (command 0x0002)
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:41 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=18 command_id=1>
2021-11-22 19:39:41 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0001: [Command(status=5, tsn=168, command_id=514, function=0, data=[4, 0, 0, 0, 209])]
2021-11-22 19:39:41 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0, 0, 0, 209] for attribute 0x0202 (command 0x0001)
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:41 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:44 DEBUG (MainThread) [ts0601_trv_siterwell] MattWestb
2021-11-22 19:39:44 DEBUG (MainThread) [ts0601_trv_siterwell] MattWestb target_temp 209
2021-11-22 19:39:49 DEBUG (MainThread) [zigpy.device] [0x70e3] Delivery error for seq # 0x33, on endpoint id 1 cluster 0xef00: message send failure
2021-11-22 19:39:49 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:5:0x0006]: command failed: 'off' args: '()' kwargs '{}' exception: '[0x70e3:1:0xef00]: Message send failure'
2021-11-22 19:39:50 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=19 command_id=2>
2021-11-22 19:39:50 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0002: [Command(status=0, tsn=51, command_id=514, function=0, data=[4, 0, 0, 0, 209])]
2021-11-22 19:39:50 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0, 0, 0, 209] for attribute 0x0202 (command 0x0002)
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:50 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=20 command_id=2>
2021-11-22 19:39:50 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0002: [Command(status=0, tsn=51, command_id=514, function=0, data=[4, 0, 0, 0, 209])]
2021-11-22 19:39:50 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0, 0, 0, 209] for attribute 0x0202 (command 0x0002)
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:50 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=21 command_id=2>
2021-11-22 19:39:50 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0002: [Command(status=0, tsn=51, command_id=514, function=0, data=[4, 0, 0, 0, 209])]
2021-11-22 19:39:50 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0, 0, 0, 209] for attribute 0x0202 (command 0x0002)
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:50 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=22 command_id=2>
2021-11-22 19:39:50 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0002: [Command(status=0, tsn=51, command_id=514, function=0, data=[4, 0, 0, 0, 209])]
2021-11-22 19:39:50 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0, 0, 0, 209] for attribute 0x0202 (command 0x0002)
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:50 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=23 command_id=1>
2021-11-22 19:39:50 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0001: [Command(status=5, tsn=169, command_id=514, function=0, data=[4, 0, 0, 0, 209])]
2021-11-22 19:39:50 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0, 0, 0, 209] for attribute 0x0202 (command 0x0001)
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:50 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:55 DEBUG (MainThread) [ts0601_trv_siterwell] MattWestb
2021-11-22 19:39:55 DEBUG (MainThread) [ts0601_trv_siterwell] MattWestb target_temp 209
2021-11-22 19:39:59 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=24 command_id=2>
2021-11-22 19:39:59 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0002: [Command(status=0, tsn=58, command_id=514, function=0, data=[4, 0, 0, 0, 209])]
2021-11-22 19:39:59 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0, 0, 0, 209] for attribute 0x0202 (command 0x0002)
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:59 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=25 command_id=2>
2021-11-22 19:39:59 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0002: [Command(status=0, tsn=58, command_id=514, function=0, data=[4, 0, 0, 0, 209])]
2021-11-22 19:39:59 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0, 0, 0, 209] for attribute 0x0202 (command 0x0002)
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:59 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=26 command_id=2>
2021-11-22 19:39:59 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0002: [Command(status=0, tsn=58, command_id=514, function=0, data=[4, 0, 0, 0, 209])]
2021-11-22 19:39:59 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0, 0, 0, 209] for attribute 0x0202 (command 0x0002)
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:59 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=27 command_id=2>
2021-11-22 19:39:59 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0002: [Command(status=0, tsn=58, command_id=514, function=0, data=[4, 0, 0, 0, 209])]
2021-11-22 19:39:59 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0, 0, 0, 209] for attribute 0x0202 (command 0x0002)
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:59 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=28 command_id=1>
2021-11-22 19:39:59 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0001: [Command(status=5, tsn=170, command_id=514, function=0, data=[4, 0, 0, 0, 209])]
2021-11-22 19:39:59 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0, 0, 0, 209] for attribute 0x0202 (command 0x0001)
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:39:59 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:40:00 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:5:0x0006]: executed 'off' command with args: '()' kwargs: '{}' result: [0, [WriteAttributesStatusRecord(status=<Status.SUCCESS: 0>)]]
2021-11-22 19:40:00 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=29 command_id=2>
2021-11-22 19:40:00 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0002: [Command(status=5, tsn=170, command_id=263, function=0, data=[1, 0])]
2021-11-22 19:40:00 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0] for attribute 0x0107 (command 0x0002)
2021-11-22 19:40:00 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=30 command_id=1>
2021-11-22 19:40:00 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0001: [Command(status=5, tsn=171, command_id=263, function=0, data=[1, 0])]
2021-11-22 19:40:00 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0] for attribute 0x0107 (command 0x0001)
2021-11-22 19:40:02 DEBUG (MainThread) [ts0601_trv_siterwell] MattWestb
2021-11-22 19:40:02 DEBUG (MainThread) [ts0601_trv_siterwell] MattWestb target_temp 209
2021-11-22 19:40:03 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=31 command_id=2>
2021-11-22 19:40:03 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0002: [Command(status=0, tsn=69, command_id=514, function=0, data=[4, 0, 0, 0, 209])]
2021-11-22 19:40:03 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0, 0, 0, 209] for attribute 0x0202 (command 0x0002)
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:40:03 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=32 command_id=1>
2021-11-22 19:40:03 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0001: [Command(status=5, tsn=172, command_id=514, function=0, data=[4, 0, 0, 0, 209])]
2021-11-22 19:40:03 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0, 0, 0, 209] for attribute 0x0202 (command 0x0001)
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 2090
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'occupied_heating_setpoint' = 2090 update
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2021-11-22 19:40:03 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tyst11_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2021-11-22 19:40:04 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:5:0x0006]: executed 'on' command with args: '()' kwargs: '{}' result: [1, [WriteAttributesStatusRecord(status=<Status.SUCCESS: 0>)]]
2021-11-22 19:40:04 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=33 command_id=2>
2021-11-22 19:40:04 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0002: [Command(status=5, tsn=172, command_id=263, function=0, data=[1, 1])]
2021-11-22 19:40:04 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [1] for attribute 0x0107 (command 0x0002)
2021-11-22 19:40:04 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=True disable_default_response=False> manufacturer=None tsn=34 command_id=1>
2021-11-22 19:40:04 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0001: [Command(status=5, tsn=173, command_id=263, function=0, data=[1, 1])]
2021-11-22 19:40:04 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [1] for attribute 0x0107 (command 0x0001)

MattWestb Nov 22, 2021
Author

Local temp 24.9° having correction -0.9° and rising the temperature from 20.9° in 0.5° steps and 24.4° ZHA is changing from idle to heating.
24.9 - 0.9 (=24.0) < 24.4 = heating = OK.

jacekk015 Nov 22, 2021

What action on TRV you can do so the local temp is sent from TRV to HA??
Maybe MODE?

MattWestb Nov 22, 2021
Author

I trying sending the same mode on the tuya cluster and reporting back.

MattWestb Nov 22, 2021
Author

Reading the mode = ZHA is using cache and and do no request to the TRV.
Writing mode 2 (manual) is sending 3 times and getting replay mode = 2 plus:

2021-11-22 20:16:54 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0, 0, 0, 244] for attribute 0x0202 (command 0x0001)

= the current setpoint temperature but no local temperature.

I think this device can only reporting then fast changing (> 1°) temperature or longer then one hour.

jacekk015 · 2021-11-23T19:22:49Z

jacekk015
Nov 23, 2021

@MattWestb Here's updated file for Siterwell
ts0601_trv_siterwell.py.zip

20 replies

MattWestb Nov 25, 2021
Author

Thanks for the update !!
I was open the balcony door and putting the TRV on the inside for 15 minutes and it was sending this:

2021-11-25 17:08:56 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0001: [Command(status=6, tsn=39, command_id=515, function=0, data=[4, 0, 0, 0, 234])]
2021-11-25 17:08:56 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0, 0, 0, 234] for attribute 0x0203 (command 0x0001)
2021-11-25 17:08:56 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[local_temp] = 2331.02021-11-25 17:08:56 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0001: [Command(status=6, tsn=39, command_id=515, function=0, data=[4, 0, 0, 0, 234])]
2021-11-25 17:08:56 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0, 0, 0, 234] for attribute 0x0203 (command 0x0001)
2021-11-25 17:08:56 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[local_temp] = 2331.0

And the window open symbol was blinking for around 30 min but no "window open alarm" = its antifreeze alarm and not window open alarm.

One small problem with the updated local temperature:
The correction is sett to -0.9° and the red from the TRV is 23.4° (234) and the quirk is sending 2331.0 (/100 = 23.3) to ZHA.

I think the correction is made with -0.09° and not -0.9° if i is doing my (very bad) math shall have being 22.5° so its looks being wrong ;-(((

I taking one look in the code if i can finding how to fixing it !!

jacekk015 Nov 25, 2021

Yep, you're right. Temp calibration need to by multiplied by 10.
Corrected.
ts0601_trv_siterwell.py.zip

jacekk015 Nov 25, 2021

And another, I think last bug, repaired.
I was using NWK id to check which TRV I send command to.
I've forgot that NWK is changed on each pairing process, so when you re-pair TRV functions stopped working.
I've switched to IEEE since this is unique and static for each device.
ts0601_trv_siterwell.py.zip

MattWestb Nov 25, 2021
Author

Version 12 :-))

I have installed the V11 after coming back from one fast run to LIDL but was not finding what i was needing.
I waiting for my test system getting report from the TRV and looking how its working and then installing V12

By the way thanks for fixing all problems !!!

MattWestb Nov 25, 2021
Author

2021-11-25 19:19:20 DEBUG (MainThread) [zigpy.zcl] [0x70e3:1:0xef00] ZCL request 0x0001: [Command(status=6, tsn=41, command_id=515, function=0, data=[4, 0, 0, 0, 243])]
2021-11-25 19:19:20 DEBUG (MainThread) [zhaquirks.tuya] [0x70e3:1:0xef00] Received value [0, 0, 0, 243] for attribute 0x0203 (command 0x0001)
2021-11-25 19:19:20 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x70E3:1:0x0201]: Attribute report 'SiterwellThermostat'[local_temp] = 2340.0

Now my math is working better :-)))

I shall updating production network with the last version so i can see how its working in real life.

MattWestb · 2021-11-25T20:56:31Z

MattWestb
Nov 25, 2021
Author

@PLTorrent Here is my brainstorming for getting better support of Siterwell TRVs that is having not so much function but most is broken in the original commit but is working very well with little coding and brain from jacekk015.
I think the Sas TRVs have more functions implanted in the firmware but i dont knowing if all is working well.
One thing then trying fixing the function its good making one discussion before so also other user can saying if they is liking it or not then its one braking change if changing how the TRV is working in HA for user using different functions in there automatons in HA.

14 replies

PLTorrent Nov 26, 2021

Proste jak drut.

Mlehehehehe ;]

103 -> 0x67
Now's funny part: attributes != DP
Last part[two elements] of DP is an attribute.
If you checked what your TRV has logged in ZHA after pairing and you got the logs then search for "67"
Above you have 0x0267

Lol, crazy stuff. How do I know if it is 0x0167 or 0x0267? ;]

MattWestb Nov 26, 2021
Author

I think i have made the correction 0.2° wrong :-((

Fix made around 21 yesterday and fresh air after and in the morning.
Its look great after making the last change only need testing for getting the last 0.1° correction right :-)))

PLTorrent Nov 26, 2021

One think that looks being problem in Z2M and deCONZ with the Sas is the children lock and perhaps valve state and OnOff if its working in real or is implemented as dead / broken functions.

@MattWestb Childlock is strange indeed, but it is strange by design. Please refer to this: Koenkk/zigbee-herdsman-converters#3379

As for the Valve state, from sniffing the tuya app/gw I can say it seems it is not reporting the valve state when the valve is opened/closed, also it does not seem to support partial valve opening. It reports the periods it was heating in tuya app history retrospecitvely. This will need further investigation

jacekk015 Nov 26, 2021

@PLTorrent because TRV after pairing to ZHA sends all attributes. You wont get any other 0x0?67
My Maxsmart mode is 0x0402 and DP is 2
Wanna cheap working thermostat's with plenty of functions:
https://allegro.pl/oferta/glowica-termostatyczna-awow-10-szt-11407902831

@MattWestb You're too precise ;-)

MattWestb Nov 26, 2021
Author

@PLTorrent the Siterwell is having the same limit (no valve % or open / closed reported) but jacekk is making the heating / idle by comparing the heating and local temperature and the last fix is implanting correction of the local temperature so its looks nice in ZHA GUI and it working great if getting the offset OK (my kitchen is now having the first 2.5 cm little warm then not open the windows so its doing the balancing very well).
The problem is that the Siterwell is not having local temperature correction in the i the firmware then its being used for getting the device reporting more frequently then one time in the hour is not possible with it (we have trying but not have getting it reporting more often but its not one large problem).

MattWestb · 2021-12-06T09:16:49Z

MattWestb
Dec 6, 2021
Author

@jacekk015 Its looks like then changing the setpoint in ZHA GUI somthing is going wrong and some time ZHA is being in one lock state and its not possible changing the temperature (the new temp is being red for some seconds and going back to the old one) and getting this in this error in the HA log:

Logger: bellows.ezsp
Source: custom_zha_quirks/ts0601_trv_siterwell.py:141
First occurred: 10:06:17 (1 occurrences)
Last logged: 10:06:17

Exception running handler
Traceback (most recent call last):
  File "/usr/local/lib/python3.9/site-packages/bellows/ezsp/__init__.py", line 301, in handle_callback
    handler(*args)
  File "/usr/local/lib/python3.9/site-packages/bellows/zigbee/application.py", line 242, in ezsp_callback_handler
    self._handle_frame(*args)
  File "/usr/local/lib/python3.9/site-packages/bellows/zigbee/application.py", line 297, in _handle_frame
    self.handle_message(
  File "/usr/local/lib/python3.9/site-packages/zigpy/application.py", line 214, in handle_message
    return sender.handle_message(
  File "/usr/local/lib/python3.9/site-packages/zigpy/device.py", line 354, in handle_message
    return endpoint.handle_message(
  File "/usr/local/lib/python3.9/site-packages/zigpy/endpoint.py", line 210, in handle_message
    handler(hdr, args, dst_addressing=dst_addressing)
  File "/usr/local/lib/python3.9/site-packages/zigpy/zcl/__init__.py", line 205, in handle_message
    self.handle_cluster_request(hdr, args, dst_addressing=dst_addressing)
  File "/usr/local/lib/python3.9/site-packages/zhaquirks/tuya/__init__.py", line 400, in handle_cluster_request
    self._update_attribute(tuya_cmd, zvalue)
  File "/config/custom_zha_quirks/ts0601_trv_siterwell.py", line 141, in _update_attribute
    (value + temp_calibration * 10) * 10,
TypeError: unsupported operand type(s) for +: 'uint32_t' and 'str'

Its look like the loop is getting wrong value types and is stopping.
Both in test and production network is ding the same.

Thanks in advance !!

7 replies

MattWestb Dec 6, 2021
Author

I have test and production up and running with version 13 :-))

The TRV i the kitchen looks having problem in the network and is not reporting or receiving commands so i have repairing it (it was getting many bad data yesterday then testing and was getting the errors).

Looks working as expected and waiting finding some reason getting one version 14 in next 2 years or so ;-))

Great thanks for fixing our TRVs so we is not sitting in the cold !!!

Mvh MW

jacekk015 Dec 6, 2021

I've started to mount my AWOW TRVs, and for me it looked same.
After initial mounting communication losts was observed. Yesterday LQI was around level 28.
Today is mostly around LQI 70.
I've got few hops to TRV since Wifi Sonoff ZBBridge is in garage. Then there's IKEA USB repeater, and then IKEA wall socket and then the TRVs on first floor. 0 level TRVs will be paired to IKEA repeater directly.
Now ZHA manages 22 devices and I need to still add 3 TRVs.

For possible repeating function I've ordered today a Zigbee dimmer 230V.
In daily room I have a standing lamp with dimmer, will replace it with this one and it will be a repeater.
Now it has a foot dimmer.
Will need to print some nice 3D case for it.

https://allegro.pl/oferta/modul-oxt-mini-sciemniacz-1-obwod-zigbee-tuya-11125325486

Also ordered 2-channel dimmer for main light - for tests, but I'm not sure if I fit it in the wall box, under the switch. They aren't deep version.

I only hope that writing a quirk wont be needed ;-)

MattWestb Dec 6, 2021
Author

My backbone is IKEA outlets that have pretty radio but one large capacitor behind the antenna so making it not 365° OK but is normally working well.

For dual dimmer i have finding one nice one and the model without neutral is the easiest mounting cable on but with neutral is working OK only problem is that is fitting the the normal EU box but most switches is too deep so need having patched ones.
https://github.com/MattWestb/tuya-Switches-Dimmer

Your is also one new one but i think one different version then my but i think your have min and max dimmer level and also selecting load type and perhaps also switch type.
We have finding many of the secret attributes late week for them :-)

Dimmer / switches is normal problem them most is using the square UK / AU format that is not fitting in the EU box one but you can finding some that working.

If using normal Zigbee its normal working OK with binding so its working then the host system is offline but if finding tuya DP (ts0601) device is not possible getting autonome function in the system (and need complicated quirks for working in ZHA :-(((( ).

jacekk015 Dec 6, 2021

That IKEA outlet was also strange for me. It's on top corridor and repeater is on the lower floor. I was surprised that signal level is so weak. I even tried to put it upside down to lower wall socket. Capacitor you say??? Got some internal photos??

MattWestb Dec 6, 2021
Author

https://diystuff.nl/tradfri/ikea-tradfri-wall-outlet-switch/

The chip is one 16.5 dBm output but its depends of the firmware setting how much is used but the receiver is one -101 dBm so its always good if the antenna is good.

MattWestb · 2023-01-01T14:47:26Z

MattWestb
Jan 1, 2023
Author

Hey @jacekk015 I was trying converting the ts0601_trv_siterwell.py to using EnchantedDevice by adding it in the device class like this class SiterwellGS361_Type1(EnchantedDevice, TuyaThermostat): and also importing the new function. The quirk is loading but im missing some functions.
Then i was adding the class in tuya quirks __init__ for the TuyaThermostat class but ZHA is not likening it then its being one circular import so was reverting it.

But then deleting and adding the TRV with the updated and not updated quirk is the TRV card only showing setpoint temperature and no local temprature.

Was trying adding the presets in the climate.py and was fixing some changed things but i was giving up then i cant flowing all the names that have being changed.
Here is the last set of the quirk i have getting from you
ts0601_trv_siterwell.zip

Thanks in advance for great help !!

0 replies

MattWestb · 2023-01-03T17:19:29Z

MattWestb
Jan 3, 2023
Author

Updated Quirk and climate.py that was broken then ZHA was doing some fixed. ts0601_trv_siterwell.zip

One side effect is the climate is throng one error then setting away mode if having the GUI for it open.
Its looks its coming then the TRV is reporting the operation mode away and the system cant getting all things OK but the setting i the GUI is OK after its having doing all its things.
This looks startling {'occupancy': <Occupancy.Unoccupied: 0>}, fail: {}
Log then changing to away mode on the device:

2023-01-03 17:33:02.091 DEBUG (MainThread) [zhaquirks.tuya] [0x3fdc:1:0xef00] Received value [0, 0, 0, 50] for attribute 0x0202 (command 0x0001)
2023-01-03 17:33:02.092 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x3FDC:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 500
2023-01-03 17:33:02.092 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x3FDC:1:0x0201]: Attribute report 'SiterwellThermostat'[occupied_heating_setpoint] = 500
2023-01-03 17:33:02.092 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x3FDC:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2023-01-03 17:33:02.092 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x3FDC:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2023-01-03 17:33:02.092 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x3FDC:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2023-01-03 17:33:02.093 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x3FDC:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2023-01-03 17:33:02.093 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x3FDC:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2023-01-03 17:33:02.093 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x3FDC:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2023-01-03 17:33:02.093 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x3FDC:1:0x0201]: Attribute report 'SiterwellThermostat'[running_mode] = RunningMode.Off
2023-01-03 17:33:02.093 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x3FDC:1:0x0201]: Attribute report 'SiterwellThermostat'[running_state] = RunningState.Idle
2023-01-03 17:33:02.095 DEBUG (MainThread) [zigpy.zcl] [0x3FDC:1:0xef00] Sending reply header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=False, direction=<Direction.Client_to_Server: 1>, disable_default_response=1, reserved=0, *is_cluster=False, *is_general=True, *is_reply=True), tsn=127, command_id=<GeneralCommand.Default_Response: 11>, *direction=<Direction.Client_to_Server: 1>, *is_reply=True)
2023-01-03 17:33:02.095 DEBUG (MainThread) [zigpy.zcl] [0x3FDC:1:0xef00] Sending reply: Default_Response(command_id=1, status=<Status.SUCCESS: 0>)
2023-01-03 17:33:02.099 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x3FDC:1:0x0201]: Attribute report 'SiterwellThermostat'[occupancy] = Occupancy.Unoccupied
2023-01-03 17:33:02.099 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x3FDC:1:0x0201]: read 'occupancy' attr, success: {'occupancy': <Occupancy.Unoccupied: 0>}, fail: {}
2023-01-03 17:33:02.099 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tuya_test_trv_thermostat: Attribute 'occupied_heating_setpoint' = 500 update
2023-01-03 17:33:02.100 DEBUG (MainThread) [homeassistant.core] Bus:Handling <Event state_changed[L]: entity_id=climate.tuya_test_trv_thermostat, old_state=<state climate.tuya_test_trv_thermostat=off; hvac_modes=(<HVACMode.HEAT: 'heat'>,), min_temp=5.0, max_temp=30.0, preset_modes=['none', 'away', 'Schedule'], current_temperature=24.1, temperature=None, hvac_action=heating, preset_mode=away, system_mode=[<SystemMode.Off: 0>]/off, occupancy=Occupancy.Unoccupied, occupied_heating_setpoint=2450, unoccupied_heating_setpoint=2450, friendly_name=tuya Test TRV Thermostat, supported_features=ClimateEntityFeature.PRESET_MODE|TARGET_TEMPERATURE @ 2023-01-03T17:32:59.152671+01:00>, new_state=<state climate.tuya_test_trv_thermostat=off; hvac_modes=(<HVACMode.HEAT: 'heat'>,), min_temp=5.0, max_temp=30.0, preset_modes=['none', 'away', 'Schedule'], current_temperature=24.1, temperature=None, hvac_action=off, preset_mode=away, system_mode=[<SystemMode.Off: 0>]/off, occupancy=Occupancy.Unoccupied, occupied_heating_setpoint=500, unoccupied_heating_setpoint=2450, friendly_name=tuya Test TRV Thermostat, supported_features=ClimateEntityFeature.PRESET_MODE|TARGET_TEMPERATURE @ 2023-01-03T17:32:59.152671+01:00>>
2023-01-03 17:33:02.101 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x3FDC:1:0x0201]: Attribute report 'SiterwellThermostat'[occupancy] = Occupancy.Unoccupied
2023-01-03 17:33:02.101 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0x3FDC:1:0x0201]: read 'occupancy' attr, success: {'occupancy': <Occupancy.Unoccupied: 0>}, fail: {}
2023-01-03 17:33:02.101 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tuya_test_trv_thermostat: Attribute 'occupied_heating_setpoint' = 500 update
2023-01-03 17:33:02.102 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tuya_test_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2023-01-03 17:33:02.102 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tuya_test_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2023-01-03 17:33:02.103 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tuya_test_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2023-01-03 17:33:02.103 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tuya_test_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2023-01-03 17:33:02.105 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tuya_test_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2023-01-03 17:33:02.106 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tuya_test_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2023-01-03 17:33:02.106 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tuya_test_trv_thermostat: Attribute 'running_mode' = RunningMode.Off update
2023-01-03 17:33:02.106 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tuya_test_trv_thermostat: Attribute 'running_state' = RunningState.Idle update
2023-01-03 17:33:02.107 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tuya_test_trv_thermostat: Attribute 'occupancy' = Occupancy.Unoccupied update
2023-01-03 17:33:02.108 DEBUG (MainThread) [homeassistant.components.zha.entity] climate.tuya_test_trv_thermostat: Attribute 'occupancy' = Occupancy.Unoccupied update

1 reply

MattWestb Jan 3, 2023
Author

For user that is installing the extended quirk. Put the climate.py in the HA configure filder.
Then from inside the HA docker container use this command for copy it inside it.

cp /config/climate.py /usr/src/homeassistant/homeassistant/components/zha/climate.py

Also place the ts0601_trv_siterwell.py in your local quirk folder and restart HA.
If getting errors then updating the quirk or adding new device that is using it is the normal that the local temperature calibrating is having non value. Put somthing it it and ZHA is starting without complaining.

jacekk015 · 2023-01-08T21:07:31Z

jacekk015
Jan 8, 2023

What function is missing?
Your TRV doesn't have Away mode:
SITERWELL_MODE_ATTR = 0x0404 # [0] off [1] scheduled [2] manual

7 replies

MattWestb Jan 20, 2023
Author

The system is loading the quirk but i dont getting the extra endpoints only the first with TRV, battery LQI.
Diagnostic
I cant see any wrong but somthing is not OK.
Do you need more logs ?
I have reversing back to the old quirk.

jacekk015 Jan 20, 2023

Yes - I need logs.

MattWestb Jan 20, 2023
Author

Was putting the new quirk back and restarted HA and now its loading the quirk OK (i still think its happens ZHA is not loading quirk OK).
I dont getting errors then changing presets and its looks working OK in both ways TRV <-> ZHA.
Only drawback is away mode is not reporting / setting the setpoint temp in ZHA OK.
Its using the last resets mode temperature => not possible see it and also not setting it in ZHA but its being displayed on the device OK.

Logs from restart of HA and changing presets plus new diag.
home-assistant.zip

Thanks for helping !!

jacekk015 Jan 21, 2023

For Away mode quirk changed temp to use Unoccupied.
I've corrected that.
ts0601_trv_siterwell.py.zip

MattWestb Jan 21, 2023
Author

Now i getting the set point temp for away mode.
Then changing on the TRV its normally working OK nit not 100% then its circling Away-Schedule-Hand / No and from the beginning Away mode.
In ZHA is always working from Schedule to Away mode bit sometimes is jumping to no. And fom No its not switching to Away mode only Schedule.

I think perhaps is problems with the presets on HA.
I using this:

@STRICT_MATCH(
    channel_names=CHANNEL_THERMOSTAT,
    manufacturers={
        "_TYST11_jeaxp72v",
        "_TYST11_kfvq6avy",
        "_TYST11_zivfvd7h",
        "_TYST11_hhrtiq0x",
        "_TYST11_ps5v5jor",
        "_TYST11_owwdxjbx",
        "_TYST11_8daqwrsj",
        "_TYST11_czk78ptr",
        "_TZE200_jeaxp72v",
        "_TZE200_kfvq6avy",
        "_TZE200_zivfvd7h",
        "_TZE200_hhrtiq0x",
        "_TZE200_ps5v5jor",
        "_TZE200_owwdxjbx",
        "_TZE200_8daqwrsj",
        "_TZE200_czk78ptr",
    },
)
class SiterwellThermostat(Thermostat):
    """Siterwell Thermostat implementation."""

    def __init__(self, unique_id, zha_device, channels, **kwargs):
        """Initialize ZHA Thermostat instance."""
        super().__init__(unique_id, zha_device, channels, **kwargs)
        self._presets = [
            PRESET_NONE,
            PRESET_AWAY,
            PRESET_SCHEDULE,
        ]
        self._supported_flags |= ClimateEntityFeature.PRESET_MODE

    @property
    def hvac_modes(self) -> tuple[str, ...]:
        """Return only the heat mode, because the device can't be turned off."""
        return (HVACMode.HEAT,)

    async def async_attribute_updated(self, record):
        """Handle attribute update from device."""
        if record.attr_name == "operation_preset":
            if record.value == 0:
                self._preset = PRESET_AWAY
            if record.value == 1:
                self._preset = PRESET_SCHEDULE
            if record.value == 2:
                self._preset = PRESET_NONE
        await super().async_attribute_updated(record)

    async def async_preset_handler(self, preset: str, enable: bool = False) -> bool:
        """Set the preset mode."""
        mfg_code = self._zha_device.manufacturer_code
        if not enable:
            return await self._thrm.write_attributes(
                {"operation_preset": 2}, manufacturer=mfg_code
            )
        if preset == PRESET_AWAY:
            return await self._thrm.write_attributes(
                {"operation_preset": 0}, manufacturer=mfg_code
            )
        if preset == PRESET_SCHEDULE:
            return await self._thrm.write_attributes(
                {"operation_preset": 1}, manufacturer=mfg_code
            )

        return False

And here is the log
home-assistant_zha_2023-01-21T14-01-36.157Z.log

MattWestb · 2023-01-09T07:34:05Z

MattWestb
Jan 9, 2023
Author

HA 2023.1.2 is braking one more function and ZHA is not starting:

Logger: homeassistant.config_entries
Source: custom_zha_quirks/ts0601_trv_siterwell.py:336
First occurred: 08:29:56 (2 occurrences)
Last logged: 08:30:59

Error setting up entry socket://192.168.2.66:9999 for zha
Traceback (most recent call last):
  File "/usr/src/homeassistant/homeassistant/config_entries.py", line 382, in async_setup
    result = await component.async_setup_entry(hass, self)
  File "/usr/src/homeassistant/homeassistant/components/zha/__init__.py", line 100, in async_setup_entry
    setup_quirks(config)
  File "/usr/local/lib/python3.10/site-packages/zhaquirks/__init__.py", line 409, in setup
    importer.find_module(modname).load_module(modname)
  File "<frozen importlib._bootstrap_external>", line 548, in _check_name_wrapper
  File "<frozen importlib._bootstrap_external>", line 1063, in load_module
  File "<frozen importlib._bootstrap_external>", line 888, in load_module
  File "<frozen importlib._bootstrap>", line 290, in _load_module_shim
  File "<frozen importlib._bootstrap>", line 719, in _load
  File "<frozen importlib._bootstrap>", line 688, in _load_unlocked
  File "<frozen importlib._bootstrap_external>", line 883, in exec_module
  File "<frozen importlib._bootstrap>", line 241, in _call_with_frames_removed
  File "/config/custom_zha_quirks/ts0601_trv_siterwell.py", line 295, in <module>
    class SiterwellWindowDetection(LocalDataCluster, OnOff):
  File "/config/custom_zha_quirks/ts0601_trv_siterwell.py", line 336, in SiterwellWindowDetection
    command_id: Union[foundation.Command, int, t.uint8_t],
AttributeError: module 'zigpy.zcl.foundation' has no attribute 'Command'

0 replies

MattWestb · 2023-01-09T08:19:35Z

MattWestb
Jan 9, 2023
Author

Updated Quirk and climate patched for working with HA 2023.1.2 that have some braking changes.
ts0601_trv_siterwell-2023.1.2.zip

0 replies

jacekk015 · 2023-01-09T20:00:31Z

jacekk015
Jan 9, 2023

Quirk corrected
ts0601_trv_siterwell.py.zip

3 replies

rofo69 Feb 13, 2023

I've just purchased one of these and this latest quirk is a huge improvement over the stock support in ZHA.
However, the entity controlling 'Number Temperature Calibration' doesn't seem to do anything. I adjust the setting (-10 <> +10) and the temperature on the thermostat in HA doesn't change. I have the TS0601 _TZE200_zivfvd7h variant.

Its possible I'm just being impatient and when the temperature updates again it will take the offset into account.

rofo69 Feb 13, 2023

Ignore me, exactly what I suspected. If you change the temperature Calibration, the TRV doesn't report back the 'changed' temperature until its next report.

MattWestb Feb 13, 2023
Author

The hardware have no support for local temperature calibration but the quirk is adjusting the received local temperature and patching it before sending it to ZHA and also the heating / idle is being adjusted with that function.

rofo69 · 2023-02-14T19:42:31Z

rofo69
Feb 14, 2023

Thanks for that explaination. I have a couple other questions.
The quirk exposed 4 switches. I've worked out that three of them are:-

Child Lock
Open Window Detection
Recalibrate
But the fourth one, when turned either on or off, simply wakes up the screen.

And finally, in the sensors section, I have three sensors, two are simply labelled 'binaryinput' with a value of off, and the last is HVAC Action. Any thoughts on what the first two are ?

0 replies

jacekk015 · 2023-02-14T22:17:16Z

jacekk015
Feb 14, 2023

Switches:

SiterwellWindowDetection
SiterwellValveDetection
SiterwellChildLock
SiterwellInstallMode

Sensors:

SiterwellWindowAlarm
SiterwellValveAlarm

2 replies

stephensalex Nov 25, 2023

Apologies in advance for the novice question but I am about to add 10 TRVs to my HA instance and thought worth checking this. I have added the first TRV and have managed to get your Siterwell quirk working however the switches and sensors are not automatically named. They are simply switches 1-4 and 2 binary sensors. Is that expected behaviour? Thanks, Alex

jacekk015 Nov 25, 2023

ZHA limitation

GamerClassN7 · 2023-03-06T15:27:29Z

GamerClassN7
Mar 6, 2023

Why this quirk is not published in repo ? i am unable to found Siterwell folder in zha-device-handlers

0 replies

axute · 2023-11-13T18:40:01Z

axute
Nov 13, 2023

Is this quirk up2date?
I added this ts0601_trv_siterwell.py and also tried to overwrite the climate.py (last part, zha will stop working).
Is there any other solution?

1 reply

jacekk015 Nov 13, 2023

Take newest version from

https://github.com/jacekk015/zha_quirks

Siterwell GS361A-H04 adding missing functions #1084

Replies: 36 comments · 117 replies

MattWestb Oct 20, 2021 Author

MattWestb Oct 20, 2021 Author

MattWestb Oct 20, 2021 Author

MattWestb Oct 20, 2021 Author

MattWestb Oct 22, 2021 Author

For user of this TRV and its mode / presets in ZHA:

MattWestb Nov 6, 2021 Author

MattWestb Nov 6, 2021 Author

MattWestb Oct 22, 2021 Author

MattWestb Oct 26, 2021 Author

Latest status of changes implanted:

Future changes implanted for the TRV:

Missing upcoming futures for the TRV:

MattWestb Oct 26, 2021 Author

Using this TRV in ZHA with presets:

MattWestb Oct 26, 2021 Author

MattWestb Oct 26, 2021 Author

MattWestb Oct 26, 2021 Author

MattWestb Nov 4, 2021 Author

MattWestb Nov 5, 2021 Author

MattWestb Nov 5, 2021 Author

MattWestb Nov 5, 2021 Author

MattWestb Nov 5, 2021 Author

MattWestb Nov 6, 2021 Author

MattWestb Nov 6, 2021 Author

MattWestb Nov 6, 2021 Author

mieć smaczny posiłek !!

MattWestb Nov 6, 2021 Author

MattWestb Nov 6, 2021 Author

MattWestb Nov 6, 2021 Author

MattWestb Nov 6, 2021 Author

MattWestb Nov 7, 2021 Author

MattWestb Nov 7, 2021 Author

MattWestb Nov 7, 2021 Author

MattWestb Nov 7, 2021 Author

MattWestb Nov 8, 2021 Author

Testing TRV functions for getting the right sensor named.

MattWestb Nov 8, 2021 Author

MattWestb Nov 21, 2021 Author

MattWestb Nov 21, 2021 Author

MattWestb Nov 21, 2021 Author

MattWestb Nov 22, 2021 Author

MattWestb Nov 22, 2021 Author

MattWestb Nov 22, 2021 Author

MattWestb Nov 22, 2021 Author

Replies: 36 comments 117 replies

MattWestb
Oct 20, 2021
Author

MattWestb Oct 20, 2021
Author

MattWestb
Oct 20, 2021
Author

MattWestb Oct 20, 2021
Author

MattWestb
Oct 22, 2021
Author

MattWestb Nov 6, 2021
Author

MattWestb Nov 6, 2021
Author

MattWestb Oct 22, 2021
Author

MattWestb
Oct 26, 2021
Author

MattWestb Oct 26, 2021
Author

MattWestb
Oct 26, 2021
Author

MattWestb Oct 26, 2021
Author

MattWestb Oct 26, 2021
Author

MattWestb
Nov 4, 2021
Author

MattWestb
Nov 5, 2021
Author

MattWestb Nov 5, 2021
Author

MattWestb
Nov 5, 2021
Author

MattWestb Nov 5, 2021
Author

MattWestb Nov 6, 2021
Author

MattWestb Nov 6, 2021
Author

MattWestb Nov 6, 2021
Author

MattWestb Nov 6, 2021
Author

MattWestb Nov 6, 2021
Author

MattWestb Nov 6, 2021
Author

MattWestb
Nov 6, 2021
Author

MattWestb Nov 7, 2021
Author

MattWestb Nov 7, 2021
Author

MattWestb Nov 7, 2021
Author

MattWestb Nov 7, 2021
Author

MattWestb
Nov 8, 2021
Author

MattWestb Nov 8, 2021
Author

MattWestb Nov 21, 2021
Author

MattWestb Nov 21, 2021
Author

MattWestb
Nov 21, 2021
Author

MattWestb Nov 22, 2021
Author

MattWestb Nov 22, 2021
Author

MattWestb Nov 22, 2021
Author

MattWestb Nov 22, 2021
Author