RTL Simulation for Verilog/VHDL Custom Logic Design with AWS HDK

Introduction

Developers tend to simulate their designs to validate the RTL design and functionality, before hitting the build stage and registering it with AWS EC2 as Amazon FPGA Image (AFI). AWS FPGA HDK comes with a shell simulation model that supports RTL-level simulation using Xilinx' Vivado XSIM, MentorGraphics' Questa, Cadence Incisive and Synopsys' VCS RTL simulators. See table below for supported simulator versions.

3rd party simulator Tool	2017.4 Vivado tool	2018.2 Vivado tool
Xilinx Vivado XSIM	Vivado v2017.4.op (64-bit)	Vivado v2018.2_AR71275_op (64-bit)
Synopsys VCS	vcs-mx/L-2016.06-1	vcs-mx/N-2017.12-SP1-1
Mentor Graphics Questa	10.6b	10.6c_1
Cadence Incisive Enterprise Simulator(IES)	15.20.063	15.20.063

Developers can write their tests in SystemVerilog and/or C languages. If a developer chooses to use the supplied C framework, he/she can use the same C code for simulation and for runtime on your FPGA-enabled instance like F1.

Quick Start

Have an EC2 instance or other server with Xilinx Vivado tools and an active license.

One easy way is to have a pre-installed environment is to use the AWS FPGA Developer AMI available on AWS Marketplace which comes with pre-installed Vivado tools and license.

For developers who like to work on-premises or different AMI in the cloud, AWS recommends following the required license for on-premise document.

Please refer to the release notes or the supported Vivado version for the exact version of Vivado tools, and the required license components.

Install the HDK and setup environment

AWS FPGA HDK can be cloned and installed on your EC2 instance or server by calling:

    $ git clone https://github.com/aws/aws-fpga
    $ cd aws-fpga
    $ source hdk_setup.sh

Try out one of HDK examples or write your own

    $ cd hdk/cl/examples/cl_hello_world/verif/scripts    # simulations are launched from the scripts subdir of the design
    $ make                                       # run the default test using the Vivado XSIM
         Running compilation flow
         Done compilation
         ...
         Vivado Simulator 2016.4_sdx
         Time resolution is 1 ps
         ...
         $finish called
    $ cd ../sim                                  # to view the test log files

Writing and Running Your Own Tests for RTL simulation

SystemVerilog Tests

One fast way to write your own test is to start with an example test from one of the examples designs and customize it for your design. All SV tests must be placed in the verif/tests sub-directory of CL design root and use the ".sv" file extension.

    cl_my_design                 # Custom Logic (CL) design root directory
    |-- build
    |-- design
    |-- software
    |   |--runtime               # C source files and header files for simulation
    `-- verif
        |-- scripts              # Makefiles and filelists
        |-- sim                  # sim results directory
        |-- sv                   # additional CL-specific test bench source
        `-- tests                # test directory

NOTE: All the tests are written to run on 64-bit instances/servers and 64-bit linux, Many of the test and reference Custom Logic (CL) examples use 64-bit address formats

module test_peek_poke();

`define WR_INSTR_INDEX 64'h1c
`define WR_ADDR_LOW    64'h20
`define WR_ADDR_HIGH   64'h24
`define WR_DATA        64'h28
`define WR_SIZE        64'h2c

`define RD_INSTR_INDEX 64'h3c
`define RD_ADDR_LOW    64'h40
`define RD_ADDR_HIGH   64'h44
`define RD_DATA        64'h48
`define RD_SIZE        64'h4c

`define CNTL_REG       64'h08

`define WR_START_BIT   32'h00000001
`define RD_START_BIT   32'h00000002

   logic [63:0] pcim_address = 64'h0000_0000_1234_0000;

   initial begin

      tb.sh.power_up();

      tb.poke_ocl(`WR_INSTR_INDEX, 0);                   // write index
      tb.poke_ocl(`WR_ADDR_LOW, pcim_address[31:0]);     // write address low
      tb.poke_ocl(`WR_ADDR_HIGH, pcim_address[63:32]);   // write address high
      tb.poke_ocl(`WR_DATA, 32'h0000_0000);              // write data
      tb.poke_ocl(`WR_SIZE, 32'h0000_0002);              // write 32b

      tb.poke_ocl(`RD_INSTR_INDEX, 0);                   // read index
      tb.poke_ocl(`RD_ADDR_LOW, pcim_address[31:0]);     // read address low
      tb.poke_ocl(`RD_ADDR_HIGH, pcim_address[63:32]);   // read address high
      tb.poke_ocl(`RD_DATA, 32'h0000_0000);              // read data
      tb.poke_ocl(`RD_SIZE, 32'h0000_0002);              // read 32b

      tb.poke_ocl(`CNTL_REG, 32'h0003);                  // start read & write

      #500ns;   // give the hardware time to run

      ...

      tb.power_down();

      $finish;
   end

endmodule // test_peek_poke

Once your test is written, you are ready to run a simulation. The scripts/ directory is where you must launch all simulations.

$ cd verif/scripts
$ make TEST={your_test_name} # compile and run using XSIM (NOTE: Do Not include .sv)
$ cd ../sim/{your_test_name} # to view the test log files

If your have Mentor Graphics' Questa simulator, then add "SIMULATOR=questa".

$ make TEST={your_test_name} QUESTA=1  # compile and run using Questa

========================================  NOTE ============================================
Use only the SV test APIs supplied with the developer's kit to stimulate your CL
design. They were designed specifically to mimic the behavior of the actual AWS Shell logic.
If you choose to control CL signalling via another method, proper operation with Shell
logic is not guaranteed.

The AWS Shell Interface specification can be found [here](AWS_Shell_Interface_Specification.md)
============================================================================================

C Tests

As with the SystemVerilog (SV) testing, one fast way to write your own test is to start with an example test from one of the examples designs and customize it for your design. All C tests must be placed in the software/runtime sub-directory of CL design root and use the ".c" file extension. HW/SW simulation support is added to simulate the software tests. SV_TEST should be used for any simulation specific code in the software test. SCOPE macro is specific to VCS simulator. Below are the 'C' header and source files for cl_hello_world example.

Header files to be included for HW/SW co-simulation

test_hello_world.c

For HW/SW simulation the below header files need to be included.
SV_TEST macro should be defined in HW makefile to enable HW simulation of test_hello_world.c

fpga_pci_sv.h is the SV wrapper for C functions.

sh_dpi_tasks.c is the C file which has common functions to be used between C and SV.

#ifdef SV_TEST
   #include "fpga_pci_sv.h"
#else
   #include <fpga_pci.h>
   #include <fpga_mgmt.h>
#endif

#include <sh_dpi_tasks.h>

Code changes to enable HW/SW co-simulation

Logger will not work for HW simulation, so use the SV_TEST macro to exclude that. pci_vendor_id and pci_device_id are not used for HW simulation as well, so should be excluded.

#ifndef SV_TEST
const struct logger *logger = &logger_stdout;
/*
 * pci_vendor_id and pci_device_id values below are Amazon's and avaliable to use for a given FPGA slot.
 * Users may replace these with their own if allocated to them by PCI SIG
 */
static uint16_t pci_vendor_id = 0x1D0F; /* Amazon PCI Vendor ID */
static uint16_t pci_device_id = 0xF000; /* PCI Device ID preassigned by Amazon for F1 applications */

/*
 * check if the corresponding AFI for hello_world is loaded
 */
#endif

Use cosim_printf function instead of printf

cosim_printf("===== Starting with peek_poke_example =====\n");

test_main should be used for HW simulation as shown below.

#ifdef SV_TEST
void test_main(uint32_t *exit_code) {
#else
int main(int argc, char **argv) {
#endif

Also SCOPE should be defined for HW simulation with VCS and QUESTA simulators.

    //The statements within SCOPE ifdef below are needed for HW/SW co-simulation with VCS
    #ifdef SCOPE
      svScope scope;
      scope = svGetScopeFromName("tb");
      svSetScope(scope);
    #endif

Checking for AFI ready is not required for HW/simulation as in simulation the hardware is directly accessed.

#ifndef SV_TEST
    rc = check_afi_ready(slot_id);
#endif

Test exit should be codes as below for HW/SW co-simulation.

#ifndef SV_TEST
    return rc;

out:
    return 1;
#else

out:
   *exit_code = 0;
#endif

test_dram_dma_hwsw_cosim.c

For HW/SW simulation the below header files need to be included.

SV_TEST macro should be defined in HW makefile to enable HW simulation of test_dram_dma.c

For test_dram_dma test the below two functions are used for DMA transfers from host and to host.

//This function on the SV side sets up the string buffer and does Host to cl transfer.
sv_fpga_start_buffer_to_cl(slot_id, channel, buffer_size, write_buffer, (0x10000000 + channel*MEM_16G));

//This function on the SV side sets up the string buffer and does CL to Host transfer.
sv_fpga_start_cl_to_buffer(slot_id, channel, buffer_size, (0x10000000 + channel*MEM_16G));

//This function updates the buffer on 'C' side.
int send_rdbuf_to_c(char* rd_buf)

For HW/SW simulation the below header files need to be included.
SV_TEST macro should be defined in HW makefile to enable HW simulation of test_dram_dma.c

Once your test is written, you are ready to run a simulation. The scripts/ directory is where you must launch all simulations.

    $ cd verif/scripts
    $ make C_TEST={your_test_name} # compile and run using XSIM (NOTE: Do Not include .c)
    $ cd ../sim/{your_test_name} # to view the test log files

    $ cd verif/scripts
    $ make C_TEST={your_test_name} VCS=1 # compile and run using VCS (NOTE: Do Not include .c)
    $ cd ../sim/{your_test_name} # to view the test log files

    $ cd verif/scripts
    $ make C_TEST={your_test_name} QUESTA=1 # compile and run using QUESTA (NOTE: Do Not include .c)
    $ cd ../sim/{your_test_name} # to view the test log files

Accessing Host Memory During Simulation

Your design may share data between host memory and logic within the CL. To verify your CL is accessing host memory, the test bench includes two types of host memory: SV and C domain host memory. If you are are only using SV to verify your CL, then use SV domain host memory. An associative array represents host memory, where the address is the key to locate a 32-bit data value.

   logic [31:0]        sv_host_memory[*];

If you are are using C to verify your CL, then use C domain host memory. Allocate a memory buffer in your C code and pass the pointer to the SV domain. The AXI BFM connected to the PCIeM port will use DPI calls to read and write the memory buffer.

Backdoor access to host memory is provided by two functions:

   function void hm_put_byte(input longint unsigned addr, byte d);
   function byte hm_get_byte(input longint unsigned addr);

Use these functions when you need to access data in either SV or C domain host memory. They take zero simulation time and are useful for initializing memory or checking results stored in memory.

Debugging Custom Logic using the AWS HDK

If a simulation fails, developers can debug issues by dumping waves of the simulation and then view them to determine the source of the problem.

The process for dumping and viewing waves can differ depending on the simulator being used. To dump and view waves using the Xilinx Vivado tools included with the AWS HDK:

Specify scope of logic for wave dump
Re-run simulation to dump waves
View waves in Vivado using .tcl

Specify scope of logic for wave dump

The file $AWS_FPGA_REPO_DIR/hdk/cl/examples/cl_dram_dma/verif/scripts/waves.tcl specifies the scope of logic for wave dump. The default behavior is to dump only the signals at the very top of the design:

    add_wave /

To recursively dump waves of all signal underneath the top level of the design, add -recursive:

    add_wave -recursive /

Note that dumping all signals of a design will increase simulation time and will result in a large file.

For more information on the syntax for add_wave and other tcl functions, see the Vivado Design Suite Tcl Command Reference Guide

Protocol Checkers

Xilinx Protocol Checkers are instantiated on all AXI4 and AXIL interfaces in Shell BFM. By default all the tests run with protocol checkers enabled. If there is a protocol error in any one of the AXI interfaces, then the protocol checker will fire an error as below.

tb.card.fpga.sh.axl_pc_bar1_slv_inst.REP : BIT( 56) : ERROR : Invalid state x tb.card.fpga.sh.axl_pc_sda_slv_inst.REP : BIT( 35) : ERROR : Invalid state x tb.card.fpga.sh.axi_pc_mstr_inst_pcim.REP : BIT( 33) : ERROR : Invalid state x tb.card.fpga.sh.axi_pc_mstr_inst_pcis.REP : BIT( 35) : ERROR : Invalid state x tb.card.fpga.sh.axl_pc_ocl_slv_inst.REP : BIT( 35) : ERROR : Invalid state x

Please refer to hdk/common/verif/models/xilinx_axi_pc/axi_protocol_checker_v1_1_vl_rfs.v for mapping between bit positins and the protocol errors.

Re-run simulation to dump waves

Once waves.tcl has been modified, re-run the simulatio with make as shown at the top of this document.

View waves in Vivado using .tcl

As mentioned above, all simulation results will be placed in sim/<test_name>. If using the included CL examples, the waves database should appear as tb.wdb.

To view the waves, first create a .tcl file called open_waves.tcl with the following commands:

current_fileset
open_wave_database tb.wdb

Then open Vivado and specify this .tcl file to execute:

vivado -source open_waves.tcl

The design hierarchy and waves should then be visible and can be inspected / debugged:

The usage of Vivado for wave debug is beyond the scope of this document. See the Vivado Design Suite Tutorials for more details.

SV Test API Reference

poke

Description

The SV Test API task 'poke' writes 64 bits of data to the CL via the AXI PCIeS interface.

Declaration

task poke(input int slot_id = 0, logic [63:0] addr, logic [63:0] data, logic [5:0] id = 6'h0, DataSize::DATA_SIZE size = DataSize::UINT32, AxiPort::AXI_PORT intf = AxiPort::PORT_DMA_PCIS);

Argument	Description
slot_id	Slot ID
addr	Write Address
data	Write Data
id	AXI ID
size	Data Size
intf	AXI CL Port

poke_pcis_wc

Description

The SV Test API task 'poke' writes 64 bits of data to the CL via the AXI PCIeS interface.

Declaration

task poke_pcis_wc(input logic [63:0] addr, logic [31:0] data [$], logic [5:0] id = 6'h0, logic [2:0] size = 3'd6);

Argument	Description
slot_id	Slot ID
addr	Write Address
data [$]	DW array for Write Data
id	AXI ID
size	Data Size
intf	AXI CL Port

peek

Description

The SV Test API task 'peek' reads up to 64 bits of data from the CL via the AXI PCIeS interface.

Declaration

task peek(input logic [63:0] addr, output logic [63:0] data, input logic [5:0] id = 6'h0, DataSize::DATA_SIZE size = DataSize::UINT32, AxiPort::AXI_PORT intf = AxiPort::PORT_DMA_PCIS);

Argument	Description
slot_id	Slot ID
addr	Read Address
data	Read Data
id	AXI ID
size	Data Size
intf	AXI CL Port

peek_bar1

Description

The SV Test API function 'task peek_bar1' reads 32 bits of data from the CL via the AXI BAR1 interface.

Declaration

task peek(input int slot_id = 0, logic [63:0] addr, output logic [31:0] data, input logic [5:0] id = 6'h0);

Argument	Description
slot_id	Slot ID
addr	Read Address
data	Read Data
id	AXI ID

poke_bar1

Description

The SV Test API task 'poke_bar1' writes 32 bits of data to the CL via the AXI BAR1 interface.

Declaration

task poke_bar1(input int slot_id = 0, logic [63:0] addr, logic [31:0] data, logic [5:0] id = 6'h0);

Argument	Description
slot_id	Slot ID
addr	Write Address
data	Write Data
id	AXI ID

peek_ocl

Description

The SV Test API function 'task peek_ocl' reads 32 bits of data from the CL via the AXI OCL interface.

Declaration

task peek_ocl(input int slot_id = 0, logic [63:0] addr, output logic [31:0] data, input logic [5:0] id = 6'h0);

Argument	Description
slot_id	Slot ID
addr	Read Address
data	Read Data
id	AXI ID

poke_ocl

Description

The SV Test API task 'poke_ocl' writes 32 bits of data to the CL via the AXI OCL interface.

Declaration

task poke_ocl(input int slot_id = 0, logic [63:0] addr, logic [31:0] data, logic [5:0] id = 6'h0);

Argument	Description
slot_id	Slot ID
addr	Write Address
data	Write Data
id	AXI ID

peek_sda

Description

The SV Test API function 'task peek_sda' reads 32 bits of data from the CL via the AXI SDA interface.

Declaration

task peek_sda(input int slot_id = 0, logic [63:0] addr, output logic [31:0] data, input logic [5:0] id = 6'h0);

Argument	Description
slot_id	Slot ID
addr	Read Address
data	Read Data
id	AXI ID

poke_sda

Description

The SV Test API task 'poke_sda' writes 32 bits of data to the CL via the AXI OCL interface.

Declaration

task poke_sda(input int slot_id = 0, logic [63:0] addr, logic [31:0] data, logic [5:0] id = 6'h0);

Argument	Description
slot_id	Slot ID
addr	Write Address
data	Write Data
id	AXI ID

peek_pcis

Description

The SV Test API function 'task peek_pcis' reads 512 bits of data from the CL via the AXI PCIS interface.

Declaration

task peek_pcis(input int slot_id = 0, logic [63:0] addr, output logic [511:0] data, input logic [5:0] id = 6'h0);

Argument	Description
slot_id	Slot ID
addr	Read Address
data	Read Data
id	AXI ID

poke_pcis

Description

The SV Test API task 'poke_pcis' writes 512 bits of data to the CL via the AXI PCIE interface.

Declaration

task poke_pcis(input int slot_id = 0, logic [63:0] addr, logic [511:0] data, logic [5:0] id = 6'h0, logic [63:0] strb);

Argument	Description
slot_id	Slot ID
addr	Write Address
data	Write Data
id	AXI ID

nsec_delay

Description

Wait dly nanoseconds.

Declaration

task nsec_delay(input int dly = 10000);

Argument	Description
dly	delay in nanoseconds

set_virtual_dip_switch

Description

Writes virtual dip switches.

Declaration

task set_virtual_dip_switch(input int slot_id=0, int dip);

Argument	Description
slot_id	Slot ID
dip	16bit dip switch setting

get_virtual_dip_switch

Description

Reads virtual dip switches.

Declaration

function logic [15:0] get_virtual_dip_switch(input int slot_id=0);

Argument	Description
slot_id	Slot ID

get_virtual_led

Description

Reads virtual LEDs.

Declaration

function logic [15:0] get_virtual_led(input int slot_id=0);

Argument	Description
slot_id	Slot ID

kernel_reset

Description

Issues a kernel reset.

Declaration

function void kernel_reset(input int slot_id=0, logic d = 1);

Argument	Description
slot_id	Slot ID
d	reset value

issue_flr

Description

Issues a PCIe Function Level Reset (FLR).

Declaration

task issue_flr(input int slot_id=0);

Argument	Description
slot_id	Slot ID

que_buffer_to_cl

Description

Queues a buffer for the DMA to send data to the CL.

Declaration

function void que_buffer_to_cl(input int slot_id = 0, int chan, logic [63:0] src_addr, logic [63:0] cl_addr, logic [27:0] len);

Argument	Description
slot_id	Slot ID
chan	DMA channel to use (0-3)
src_addr	Data's Source Address
cl_addr	Custom Logic Address
len	Length of DMA in bytes

que_cl_to_buffer

Description

Queues a buffer for the DMA to receive data from the CL.

Declaration

function void que_cl_to_buffer(input int slot_id = 0, int chan, logic [63:0] dst_addr, logic [63:0] cl_addr, logic [27:0] len);

Argument	Description
slot_id	Slot ID
chan	DMA channel to use (0-3)
dst_addr	Data's Destination Address
cl_addr	Custom Logic Address
len	Length of DMA in bytes

start_que_to_cl

Description

Starts the DMA operation to the CL.

Declaration

function void start_que_to_cl(input int slot_id = 0, int chan);

Argument	Description
slot_id	Slot ID
chan	DMA channel to use (0-3)

start_que_to_buffer

Description

Starts the DMA operation from the CL.

Declaration

function void start_que_to_buffer(input int slot_id = 0, int chan);

Argument	Description
slot_id	Slot ID
chan	DMA channel to use (0-3)

is_dma_to_cl_done

Description

Returns non-zero if the DMA to the CL is complete.

Declaration

function bit is_dma_to_cl_done(input int slot_id = 0, input int chan);

Argument	Description
slot_id	Slot ID
chan	DMA channel to use (0-3)

is_dma_to_buffer_done

Description

Returns non-zero if the DMA to the buffer is complete.

Declaration

function bit is_dma_to_buffer_done(input int slot_id = 0, input int chan);

Argument	Description
slot_id	Slot ID
chan	DMA channel to use (0-3)

map_host_memory

Description

The SV Test API function 'task map_host_memory(input logic [63:0] addr)' maps host memory to 64-bit address.

Declaration

task map_host_memory(input logic [63:0] addr);

Argument	Description
addr	Address

hm_put_byte

Description

The SV Test API function 'function void hm_put_byte(input longint unsigned addr, byte d)' is used to backdoor load host memory.

Declaration

function void hm_put_byte(input longint unsigned addr, byte d);

Argument	Description
addr	Address
d	data

hm_get_byte

Description

The SV Test API function 'function void hm_get_byte(input longint unsigned addr)' is used to read data from host memory using backdoor.

Declaration

function void hm_get_byte(input longint unsigned addr);

Argument	Description
addr	Address

C Test API Reference

cl_poke

Description

The C Test API function 'extern void cl_poke(uint64_t addr, uint32_t data)' writes 32 bits of data to the CL via the AXI PCIeS interface. This function calls the SV poke function via DPI calls.

Declaration

extern void cl_poke(uint64_t addr, uint32_t data);

Argument	Description
addr	Write Address
data	Write Data

cl_peek

Description

The C Test API function 'extern void cl_peek(uint64_t addr)' Reads 32 bits of data from the CL via the AXI PCIeS interface. This function calls the SV peek function via DPI calls.

Declaration

extern void cl_peek(uint64_t addr, uint32_t data);

Argument	Description
addr	Read Address
data	Read Data

sv_map_host_memory

Description

The C Test API function 'extern void sv_map_host_memory(uint8_t *memory)' maps host memory to memory allocated by memory buffer. This function calls the SV map_host_memory function via DPI calls.

Declaration

extern void sv_map_host_memory(uint8_t *memory);

Argument	Description
*memory	pointer to memory buffer

host_memory_putc

Description

The C Test API function 'void host_memory_putc(uint64_t addr, uint8_t data)' is used to backdoor load host memory.

Declaration

void host_memory_putc(uint64_t addr, uint8_t data)

Argument	Description
addr	Address
data	data

host_memory_getc

Description

The C Test API function 'void host_memory_getc(uint64_t addr)' is used to backdoor load host memory.

Declaration

void host_memory_putc(uint64_t addr, uint8_t data)

Argument	Description
addr	Address

log_printf

Description

The C Test API function 'void log_printf(const char *format, ...)' is used to print messages when running a simulation. The regular 'C' printf will not work when running a 'C' and 'SV' mixed language simulation. This 'C' function calls SV function sv_printf via DPI calls.

Declaration

void log_printf(const char *format, ...);

Argument	Description
*format	message to be printed

sv_printf

Description

The C Test API function 'extern void sv_printf(char *msg)' is used to send a message buffer to the SV side of simulation.

Declaration

extern void sv_printf(char *msg);

Argument	Description
*msg	Character buffer

sv_pause

Description

The C test API function 'extern void sv_pause(uint32_t x);' is used to add delay to a simulation.

Declaration

extern void sv_pause(uint32_t x);

Argument	Description
x	Delay in micro seconds

sv_fpga_start_buffer_to_cl

Description

The C test API function 'extern "DPI-C" task sv_fpga_start_buffer_to_cl;' is used to do DMA data transfer from Host to CL.

Declaration

extern void sv_fpga_start_buffer_to_cl(uint32_t slot_id, uint32_t chan, uint32_t buf_size, const char *wr_buffer, uint64_t cl_addr);

Argument	Description
slot_id	Slot ID
chan	DMA channel
buf_size	Size of the buffer
wr_buffer	Data to be transferred
cl_addr	Destination CL address

sv_fpga_start_cl_to_buffer

Description

The C test API function 'extern "DPI-C" task sv_fpga_start_cl_to_buffer;' is used to do DMA data transfer from Host to CL.

Declaration

extern void sv_fpga_start_cl_to_buffer(uint32_t slot_id, uint32_t chan, uint32_t buf_size, uint64_t cl_addr);

Argument	Description
slot_id	Slot ID
chan	DMA channel
buf_size	Size of the buffer
wr_buffer	Data to be transferred
cl_addr	Destination CL address

set_chk_clk_freq

The SV test API function 'function void set_chk_clk_freq(input int slot_id = 0, logic chk_freq = 1'b1);' is used to enable frequency checks in shell model.

Declaration

function void set_chk_clk_freq(input int slot_id = 0, logic chk_freq = 1'b1);

Argument	Description
slot_id	Slot ID
chk_freq	enable bit

chk_prot_err_stat

The SV test API function 'function logic chk_prot_err_stat(input int slot_id = 0);' is used to check protocol error status.

Declaration

function logic chk_clk_err_cnt(input int slot_id = 0);

Argument	Description
slot_id	Slot ID

get_global_counter_0

The SV test API function 'function logic [63:0] get_global_counter_0(input int slot_id = 0);' is used to get global counter_0 value.

Declaration

function logic [63:0] get_global_counter_0(input int slot_id = 0);

Argument	Description
slot_id	Slot ID

get_global_counter_1

The SV test API function 'function logic [63:0] get_global_counter_1(input int slot_id = 0);' is used to get global counter_1 value.

Declaration

function logic [63:0] get_global_counter_1(input int slot_id = 0);

Argument	Description
slot_id	Slot ID

Files

RTL_Simulating_CL_Designs.md

Latest commit

History

RTL_Simulating_CL_Designs.md

File metadata and controls

RTL Simulation for Verilog/VHDL Custom Logic Design with AWS HDK

Introduction

Quick Start

Have an EC2 instance or other server with Xilinx Vivado tools and an active license.

Install the HDK and setup environment

Try out one of HDK examples or write your own

Writing and Running Your Own Tests for RTL simulation

SystemVerilog Tests

C Tests

Header files to be included for HW/SW co-simulation

Code changes to enable HW/SW co-simulation

Accessing Host Memory During Simulation

Debugging Custom Logic using the AWS HDK

Specify scope of logic for wave dump

Protocol Checkers

Re-run simulation to dump waves

View waves in Vivado using .tcl

SV Test API Reference

poke

Description

Declaration

task poke(input int slot_id = 0, logic [63:0] addr, logic [63:0] data, logic [5:0] id = 6'h0, DataSize::DATA_SIZE size = DataSize::UINT32, AxiPort::AXI_PORT intf = AxiPort::PORT_DMA_PCIS);

poke_pcis_wc

Description

Declaration

task poke_pcis_wc(input logic [63:0] addr, logic [31:0] data [$], logic [5:0] id = 6'h0, logic [2:0] size = 3'd6);

peek

Description

Declaration

task peek(input logic [63:0] addr, output logic [63:0] data, input logic [5:0] id = 6'h0, DataSize::DATA_SIZE size = DataSize::UINT32, AxiPort::AXI_PORT intf = AxiPort::PORT_DMA_PCIS);

peek_bar1

Description

Declaration

task peek(input int slot_id = 0, logic [63:0] addr, output logic [31:0] data, input logic [5:0] id = 6'h0);

poke_bar1

Description

Declaration

task poke_bar1(input int slot_id = 0, logic [63:0] addr, logic [31:0] data, logic [5:0] id = 6'h0);

peek_ocl

Description

Declaration

task peek_ocl(input int slot_id = 0, logic [63:0] addr, output logic [31:0] data, input logic [5:0] id = 6'h0);

poke_ocl

Description

Declaration

task poke_ocl(input int slot_id = 0, logic [63:0] addr, logic [31:0] data, logic [5:0] id = 6'h0);

peek_sda

Description

Declaration

task peek_sda(input int slot_id = 0, logic [63:0] addr, output logic [31:0] data, input logic [5:0] id = 6'h0);

poke_sda

Description

Declaration

task poke_sda(input int slot_id = 0, logic [63:0] addr, logic [31:0] data, logic [5:0] id = 6'h0);

peek_pcis

Description

Declaration

task peek_pcis(input int slot_id = 0, logic [63:0] addr, output logic [511:0] data, input logic [5:0] id = 6'h0);

poke_pcis

Description

Declaration

task poke_pcis(input int slot_id = 0, logic [63:0] addr, logic [511:0] data, logic [5:0] id = 6'h0, logic [63:0] strb);

nsec_delay

Description

Declaration

task nsec_delay(input int dly = 10000);

set_virtual_dip_switch

Description

Declaration

task set_virtual_dip_switch(input int slot_id=0, int dip);

get_virtual_dip_switch

Description

Declaration

function logic [15:0] get_virtual_dip_switch(input int slot_id=0);