CPU Temperature - None

[Terence-D]

Hey there, I've been trying to figure out what I'm doing wrong, but haven't had any luck. Please let me know if this is the wrong area to ask / missing any information

Issue - CPU Temperature shows up as "None" even though sensors reports the temperature correctly.
System - Ubuntu 22.04
Version of System Bridge: 3.11.2
CPU: Intel Core i7-2600K 3.4 GHz Quad-Core Processor
Motherboard: Asus P8Z68-V PRO ATX LGA1155 Motherboard

python3 -m systembridgecli data cpu | grep temp
| None | 1.70568e+09 | temperature |

sensors outputs:
nct6776-isa-0290
Adapter: ISA adapter
Vcore: 1.14 V (min = +0.00 V, max = +1.74 V)
in1: 1.01 V (min = +0.00 V, max = +0.00 V) ALARM
AVCC: 3.30 V (min = +2.98 V, max = +3.63 V)
+3.3V: 3.30 V (min = +2.98 V, max = +3.63 V)
in4: 1000.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in5: 2.04 V (min = +0.00 V, max = +0.00 V) ALARM
in6: 1.02 V (min = +0.00 V, max = +0.00 V) ALARM
3VSB: 3.41 V (min = +2.98 V, max = +3.63 V)
Vbat: 3.34 V (min = +2.70 V, max = +3.63 V)
fan1: 0 RPM (min = 0 RPM)
fan2: 2115 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
SYSTIN: +25.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor
CPUTIN: -60.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermal diode
AUXTIN: +24.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
PECI Agent 0: +18.0°C (high = +80.0°C, hyst = +75.0°C)
(crit = +88.0°C)
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
PCH_MCH_TEMP: +0.0°C
intrusion0: ALARM
intrusion1: ALARM
beep_enable: disabled

acpitz-acpi-0
Adapter: ACPI interface
temp1: +27.8°C (crit = +99.0°C)
temp2: +29.8°C (crit = +99.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +30.0°C (high = +80.0°C, crit = +98.0°C)
Core 0: +30.0°C (high = +80.0°C, crit = +98.0°C)
Core 1: +29.0°C (high = +80.0°C, crit = +98.0°C)
Core 2: +27.0°C (high = +80.0°C, crit = +98.0°C)
Core 3: +26.0°C (high = +80.0°C, crit = +98.0°C)

[Ekomak]

I have the same issue with same Ubuntu version 22.04 and sensors command works for me too.
Can't find a workaround to this issue.

[timmo001]

Can you view data and add the output of sensors. You should hopefully have a temperature value in there, its just the case of mapping it for the setup you have

[Ekomak]

Thanks for your Help,
When I view data, I get this output. Temperatures data are of course visible. Hope I could have help with this and you could give me information about

its just the case of mapping it for the setup you have

{ "fans": { "atk0110": [ [ "CPU FAN Speed", 1203 ], [ "CHASSIS FAN Speed", 1112 ], [ "CHASSIS FAN 2 Speed", 633 ], [ "POWER FAN Speed", 934 ] ] }, "temperatures": { "atk0110": [ [ "CPU Temperature", 44, 60, 95 ], [ "MB Temperature", 32, 45, 75 ] ], "k10temp": [ [ "", 0, 70, 99.5 ] ], "nouveau": [ [ "", 33, 95, 105 ] ] }, "windows_sensors": null }

[timmo001]

Added in timmo001/system-bridge-backend#117

[Ekomak]

Thanks @timmo001. As I install the .deb version of system bridge, I'll wait for the next .deb release to update front and backend. I don't want to mess up with my current installation. I'll send feed back after that. Thanks again.

[Ekomak]

Latest version 4.1.10 works like a charm. Thank you !!!