Role models are important.
— Officer Alex J. Murphy / RoboCop
|
Tip
|
You can find a beautiful version of this guide with much improved navigation at https://rails.rubystyle.guide. |
The goal of this guide is to present a set of best practices and style prescriptions for Ruby on Rails 4 development. It’s a complementary guide to the already existing community-driven Ruby coding style guide.
This Rails style guide recommends best practices so that real-world Rails programmers can write code that can be maintained by other real-world Rails programmers. A style guide that reflects real-world usage gets used, and a style guide that holds to an ideal that has been rejected by the people it is supposed to help risks not getting used at all - no matter how good it is.
The guide is separated into several sections of related rules. I’ve tried to add the rationale behind the rules (if it’s omitted I’ve assumed it’s pretty obvious).
I didn’t come up with all the rules out of nowhere - they are mostly based on my extensive career as a professional software engineer, feedback and suggestions from members of the Rails community and various highly regarded Rails programming resources.
|
Note
|
Some of the advice here is applicable only to Rails 4.0+. |
You can generate a PDF copy of this guide using AsciiDoctor PDF, and an HTML copy with AsciiDoctor using the following commands:
# Generates README.pdf
asciidoctor-pdf -a allow-uri-read README.adoc
# Generates README.html
asciidoctor|
Tip
|
Install the gem install rouge |
Translations of the guide are available in the following languages:
|
Tip
|
RuboCop, a static code analyzer (linter) and formatter, has a rubocop-rails extension, based on this style guide.
|
Put custom initialization code in config/initializers.
The code in initializers executes on application startup.
Keep initialization code for each gem in a separate file with the same name as the gem, for example carrierwave.rb, active_admin.rb, etc.
Adjust accordingly the settings for development, test and production environment (in the corresponding files under config/environments/)
Mark additional assets for precompilation (if any):
# config/environments/production.rb
# Precompile additional assets (application.js, application.css,
#and all non-JS/CSS are already added)
config.assets.precompile += %w( rails_admin/rails_admin.css rails_admin/rails_admin.js )Keep configuration that’s applicable to all environments in the config/application.rb file.
Create an additional staging environment that closely resembles the production one.
Keep any additional configuration in YAML files under the config/ directory.
Since Rails 4.2 YAML configuration files can be easily loaded with the new config_for method:
Rails::Application.config_for(:yaml_file)When you need to add more actions to a RESTful resource (do you really need them at all?) use member and collection routes.
# bad
get 'subscriptions/:id/unsubscribe'
resources :subscriptions
# good
resources :subscriptions do
get 'unsubscribe', on: :member
end
# bad
get 'photos/search'
resources :photos
# good
resources :photos do
get 'search', on: :collection
endIf you need to define multiple member/collection routes use the alternative block syntax.
resources :subscriptions do
member do
get 'unsubscribe'
# more routes
end
end
resources :photos do
collection do
get 'search'
# more routes
end
endUse nested routes to express better the relationship between Active Record models.
class Post < ActiveRecord::Base
has_many :comments
end
class Comment < ActiveRecord::Base
belongs_to :post
end
# routes.rb
resources :posts do
resources :comments
endIf you need to nest routes more than 1 level deep then use the shallow: true option.
This will save user from long URLs posts/1/comments/5/versions/7/edit and you from long URL helpers edit_post_comment_version.
resources :posts, shallow: true do
resources :comments do
resources :versions
end
endUse namespaced routes to group related actions.
namespace :admin do
# Directs /admin/products/* to Admin::ProductsController
# (app/controllers/admin/products_controller.rb)
resources :products
endNever use the legacy wild controller route. This route will make all actions in every controller accessible via GET requests.
# very bad
match ':controller(/:action(/:id(.:format)))'Don’t use match to define any routes unless there is need to map multiple request types among [:get, :post, :patch, :put, :delete] to a single action using :via option.
Keep the controllers skinny - they should only retrieve data for the view layer and shouldn’t contain any business logic (all the business logic should naturally reside in the model).
Each controller action should (ideally) invoke only one method other than an initial find or new.
Minimize the number of instance variables passed between a controller and a view.
Controller actions specified in the option of Action Filter should be in lexical scope. The ActionFilter specified for an inherited action makes it difficult to understand the scope of its impact on that action.
# bad
class UsersController < ApplicationController
before_action :require_login, only: :export
end
# good
class UsersController < ApplicationController
before_action :require_login, only: :export
def export
end
endPrefer using a template over inline rendering.
# very bad
class ProductsController < ApplicationController
def index
render inline: "<% products.each do |p| %><p><%= p.name %></p><% end %>", type: :erb
end
end
# good
## app/views/products/index.html.erb
<%= render partial: 'product', collection: products %>
## app/views/products/_product.html.erb
<p><%= product.name %></p>
<p><%= product.price %></p>
## app/controllers/foo_controller.rb
class ProductsController < ApplicationController
def index
render :index
end
endPrefer render plain: over render text:.
# bad - sets MIME type to `text/html`
...
render text: 'Ruby!'
...
# bad - requires explicit MIME type declaration
...
render text: 'Ruby!', content_type: 'text/plain'
...
# good - short and precise
...
render plain: 'Ruby!'
...Prefer corresponding symbols to numeric HTTP status codes. They are meaningful and do not look like "magic" numbers for less known HTTP status codes.
# bad
...
render status: 403
...
# good
...
render status: :forbidden
...Introduce non-Active Record model classes freely.
Name the models with meaningful (but short) names without abbreviations.
If you need model objects that support Active Record behavior (like validation) without the Active Record database functionality use the ActiveAttr gem.
class Message
include ActiveAttr::Model
attribute :name
attribute :email
attribute :content
attribute :priority
attr_accessible :name, :email, :content
validates :name, presence: true
validates :email, format: { with: /\A[-a-z0-9_+\.]+\@([-a-z0-9]+\.)+[a-z0-9]{2,4}\z/i }
validates :content, length: { maximum: 500 }
endFor a more complete example refer to the RailsCast on the subject.
Unless they have some meaning in the business domain, don’t put methods in your model that just format your data (like code generating HTML). These methods are most likely going to be called from the view layer only, so their place is in helpers. Keep your models for business logic and data-persistence only.
Avoid altering Active Record defaults (table names, primary key, etc) unless you have a very good reason (like a database that’s not under your control).
# bad - don't do this if you can modify the schema
class Transaction < ActiveRecord::Base
self.table_name = 'order'
...
endPrefer hash syntax over arrays for enums.
class Transaction < ActiveRecord::Base
# bad - implicit values - ordering in array matters
enum type: %i[credit debit]
# good - explicit values - ordering does not matter
enum type: {
credit: 0,
debit: 1,
}
endGroup macro-style methods (has_many, validates, etc) in the beginning of the class definition.
class User < ActiveRecord::Base
# keep the default scope first (if any)
default_scope { where(active: true) }
# constants come up next
COLORS = %w(red green blue)
# afterwards we put attr related macros
attr_accessor :formatted_date_of_birth
attr_accessible :login, :first_name, :last_name, :email, :password
# Rails 4+ enums after attr macros, prefer the hash syntax
enum gender: { female: 0, male: 1 }
# followed by association macros
belongs_to :country
has_many :authentications, dependent: :destroy
# and validation macros
validates :email, presence: true
validates :username, presence: true
validates :username, uniqueness: { case_sensitive: false }
validates :username, format: { with: /\A[A-Za-z][A-Za-z0-9._-]{2,19}\z/ }
validates :password, format: { with: /\A\S{8,128}\z/, allow_nil: true }
# next we have callbacks
before_save :cook
before_save :update_username_lower
# other macros (like devise's) should be placed after the callbacks
...
endPrefer has_many :through to has_and_belongs_to_many.
Using has_many :through allows additional attributes and validations on the join model.
# not so good - using has_and_belongs_to_many
class User < ActiveRecord::Base
has_and_belongs_to_many :groups
end
class Group < ActiveRecord::Base
has_and_belongs_to_many :users
end
# preferred way - using has_many :through
class User < ActiveRecord::Base
has_many :memberships
has_many :groups, through: :memberships
end
class Membership < ActiveRecord::Base
belongs_to :user
belongs_to :group
end
class Group < ActiveRecord::Base
has_many :memberships
has_many :users, through: :memberships
endPrefer self[:attribute] over read_attribute(:attribute).
# bad
def amount
read_attribute(:amount) * 100
end
# good
def amount
self[:amount] * 100
endPrefer self[:attribute] = value over write_attribute(:attribute, value).
# bad
def amount
write_attribute(:amount, 100)
end
# good
def amount
self[:amount] = 100
endAlways use the "new-style" validations.
# bad
validates_presence_of :email
validates_length_of :email, maximum: 100
# good
validates :email, presence: true, length: { maximum: 100 }To make validations easy to read, don’t list multiple attributes per validation.
# bad
validates :email, :password, presence: true
validates :email, length: { maximum: 100 }
# good
validates :email, presence: true, length: { maximum: 100 }
validates :password, presence: trueWhen a custom validation is used more than once or the validation is some regular expression mapping, create a custom validator file.
# bad
class Person
validates :email, format: { with: /\A([^@\s]+)@((?:[-a-z0-9]+\.)+[a-z]{2,})\z/i }
end
# good
class EmailValidator < ActiveModel::EachValidator
def validate_each(record, attribute, value)
record.errors[attribute] << (options[:message] || 'is not a valid email') unless value =~ /\A([^@\s]+)@((?:[-a-z0-9]+\.)+[a-z]{2,})\z/i
end
end
class Person
validates :email, email: true
endKeep custom validators under app/validators.
Consider extracting custom validators to a shared gem if you’re maintaining several related apps or the validators are generic enough.
Use named scopes freely.
class User < ActiveRecord::Base
scope :active, -> { where(active: true) }
scope :inactive, -> { where(active: false) }
scope :with_orders, -> { joins(:orders).select('distinct(users.id)') }
endWhen a named scope defined with a lambda and parameters becomes too complicated, it is preferable to make a class method instead which serves the same purpose of the named scope and returns an ActiveRecord::Relation object.
Arguably you can define even simpler scopes like this.
class User < ActiveRecord::Base
def self.with_orders
joins(:orders).select('distinct(users.id)')
end
endOrder callback declarations in the order, in which they will be executed. For reference, see Available Callbacks.
#bad
class Person
after_commit :after_commit_callback
before_validation :before_validation_callback
end
#good
class Person
before_validation :before_validation_callback
after_commit :after_commit_callback
endBeware of the behavior of the following methods. They do not run the model validations and could easily corrupt the model state.
# bad
Article.first.decrement!(:view_count)
DiscussionBoard.decrement_counter(:post_count, 5)
Article.first.increment!(:view_count)
DiscussionBoard.increment_counter(:post_count, 5)
person.toggle :active
product.touch
Billing.update_all("category = 'authorized', author = 'David'")
user.update_attribute(:website, 'example.com')
user.update_columns(last_request_at: Time.current)
Post.update_counters 5, comment_count: -1, action_count: 1
# good
user.update_attributes(website: 'example.com')Use user-friendly URLs.
Show some descriptive attribute of the model in the URL rather than its id.
There is more than one way to achieve this.
This method is used by Rails for constructing a URL to the object.
The default implementation returns the id of the record as a String.
It could be overridden to include another human-readable attribute.
class Person
def to_param
"#{id} #{name}".parameterize
end
endIn order to convert this to a URL-friendly value, parameterize should be called on the string.
The id of the object needs to be at the beginning so that it can be found by the find method of Active Record.
It allows creation of human-readable URLs by using some descriptive attribute of the model instead of its id.
class Person
extend FriendlyId
friendly_id :name, use: :slugged
endCheck the gem documentation for more information about its usage.
Use find_each to iterate over a collection of AR objects.
Looping through a collection of records from the database (using the all method, for example) is very inefficient since it will try to instantiate all the objects at once.
In that case, batch processing methods allow you to work with the records in batches, thereby greatly reducing memory consumption.
# bad
Person.all.each do |person|
person.do_awesome_stuff
end
Person.where('age > 21').each do |person|
person.party_all_night!
end
# good
Person.find_each do |person|
person.do_awesome_stuff
end
Person.where('age > 21').find_each do |person|
person.party_all_night!
endSince Rails creates callbacks for dependent associations, always call before_destroy callbacks that perform validation with prepend: true.
# bad (roles will be deleted automatically even if super_admin? is true)
has_many :roles, dependent: :destroy
before_destroy :ensure_deletable
def ensure_deletable
raise "Cannot delete super admin." if super_admin?
end
# good
has_many :roles, dependent: :destroy
before_destroy :ensure_deletable, prepend: true
def ensure_deletable
raise "Cannot delete super admin." if super_admin?
endDefine the dependent option to the has_many and has_one associations.
# bad
class Post < ActiveRecord::Base
has_many :comments
end
# good
class Post < ActiveRecord::Base
has_many :comments, dependent: :destroy
endWhen persisting AR objects always use the exception raising bang! method or handle the method return value.
This applies to create, save, update, destroy, first_or_create and find_or_create_by.
# bad
user.create(name: 'Bruce')
# bad
user.save
# good
user.create!(name: 'Bruce')
# or
bruce = user.create(name: 'Bruce')
if bruce.persisted?
...
else
...
end
# good
user.save!
# or
if user.save
...
else
...
endAvoid string interpolation in queries, as it will make your code susceptible to SQL injection attacks.
# bad - param will be interpolated unescaped
Client.where("orders_count = #{params[:orders]}")
# good - param will be properly escaped
Client.where('orders_count = ?', params[:orders])Consider using named placeholders instead of positional placeholders when you have more than 1 placeholder in your query.
# okish
Client.where(
'created_at >= ? AND created_at <= ?',
params[:start_date], params[:end_date]
)
# good
Client.where(
'created_at >= :start_date AND created_at <= :end_date',
start_date: params[:start_date], end_date: params[:end_date]
)Favor the use of find over where.take!, find_by!, and find_by_id! when you need to retrieve a single record by primary key id and raise ActiveRecord::RecordNotFound when the record is not found.
# bad
User.where(id: id).take!
# bad
User.find_by_id!(id)
# bad
User.find_by!(id: id)
# good
User.find(id)Favor the use of find_by over where.take and find_by_attribute when you need to retrieve a single record by one or more attributes and return nil when the record is not found.
# bad
User.where(email: email).take
User.where(first_name: 'Bruce', last_name: 'Wayne').take
# bad
User.find_by_email(email)
# bad, deprecated in Active Record 4.0, removed in 4.1+
User.find_by_first_name_and_last_name('Bruce', 'Wayne')
# good
User.find_by(email: email)
User.find_by(first_name: 'Bruce', last_name: 'Wayne')Favor the use of where.not over SQL.
# bad
User.where("id != ?", id)
# good
User.where.not(id: id)Don’t use the id column for ordering.
The sequence of ids is not guaranteed to be in any particular order, despite often (incidentally) being chronological.
Use a timestamp column to order chronologically.
As a bonus the intent is clearer.
# bad
scope :chronological, -> { order(id: :asc) }
# good
scope :chronological, -> { order(created_at: :asc) }When specifying an explicit query in a method such as find_by_sql, use heredocs with squish.
This allows you to legibly format the SQL with line breaks and indentations, while supporting syntax highlighting in many tools (including GitHub, Atom, and RubyMine).
User.find_by_sql(<<-SQL.squish)
SELECT
users.id, accounts.plan
FROM
users
INNER JOIN
accounts
ON
accounts.user_id = users.id
# further complexities...
SQLString#squish removes the indentation and newline characters so that your server log shows a fluid string of SQL rather than something like this:
SELECT\n users.id, accounts.plan\n FROM\n users\n INNER JOIN\n acounts\n ON\n accounts.user_id = users.id
When querying Active Record collections, prefer size (selects between count/length behavior based on whether collection is already loaded) or length (always loads the whole collection and counts the array elements) over count (always does a database query for the count).
# bad
User.count
# good
User.all.size
# good - if you really need to load all users into memory
User.all.lengthKeep the schema.rb (or structure.sql) under version control.
Use rake db:schema:load instead of rake db:migrate to initialize an empty database.
Enforce default values in the migrations themselves instead of in the application layer.
# bad - application enforced default value
class Product < ActiveRecord::Base
def amount
self[:amount] || 0
end
end
# good - database enforced
class AddDefaultAmountToProducts < ActiveRecord::Migration
def change
change_column_default :products, :amount, 0
end
endWhile enforcing table defaults only in Rails is suggested by many Rails developers, it’s an extremely brittle approach that leaves your data vulnerable to many application bugs. And you’ll have to consider the fact that most non-trivial apps share a database with other applications, so imposing data integrity from the Rails app is impossible.
Enforce foreign-key constraints. As of Rails 4.2, Active Record supports foreign key constraints natively.
When writing constructive migrations (adding tables or columns), use the change method instead of up and down methods.
# the old way
class AddNameToPeople < ActiveRecord::Migration
def up
add_column :people, :name, :string
end
def down
remove_column :people, :name
end
end
# the new preferred way
class AddNameToPeople < ActiveRecord::Migration
def change
add_column :people, :name, :string
end
endIf you have to use models in migrations, make sure you define them so that you don’t end up with broken migrations in the future.
# db/migrate/<migration_file_name>.rb
# frozen_string_literal: true
# bad
class ModifyDefaultStatusForProducts < ActiveRecord::Migration
def change
old_status = 'pending_manual_approval'
new_status = 'pending_approval'
reversible do |dir|
dir.up do
Product.where(status: old_status).update_all(status: new_status)
change_column :products, :status, :string, default: new_status
end
dir.down do
Product.where(status: new_status).update_all(status: old_status)
change_column :products, :status, :string, default: old_status
end
end
end
end
# good
# Define `table_name` in a custom named class to make sure that you run on the
# same table you had during the creation of the migration.
# In future if you override the `Product` class and change the `table_name`,
# it won't break the migration or cause serious data corruption.
class MigrationProduct < ActiveRecord::Base
self.table_name = :products
end
class ModifyDefaultStatusForProducts < ActiveRecord::Migration
def change
old_status = 'pending_manual_approval'
new_status = 'pending_approval'
reversible do |dir|
dir.up do
MigrationProduct.where(status: old_status).update_all(status: new_status)
change_column :products, :status, :string, default: new_status
end
dir.down do
MigrationProduct.where(status: new_status).update_all(status: old_status)
change_column :products, :status, :string, default: old_status
end
end
end
endName your foreign keys explicitly instead of relying on Rails auto-generated FK names. (https://guides.rubyonrails.org/active_record_migrations.html#foreign-keys)
# bad
class AddFkArticlesToAuthors < ActiveRecord::Migration
def change
add_foreign_key :articles, :authors
end
end
# good
class AddFkArticlesToAuthors < ActiveRecord::Migration
def change
add_foreign_key :articles, :authors, name: :articles_author_id_fk
end
endDon’t use non-reversible migration commands in the change method.
Reversible migration commands are listed below.
ActiveRecord::Migration::CommandRecorder
# bad
class DropUsers < ActiveRecord::Migration
def change
drop_table :users
end
end
# good
class DropUsers < ActiveRecord::Migration
def up
drop_table :users
end
def down
create_table :users do |t|
t.string :name
end
end
end
# good
# In this case, block will be used by create_table in rollback
# https://api.rubyonrails.org/classes/ActiveRecord/ConnectionAdapters.html#method-i-drop_table
class DropUsers < ActiveRecord::Migration
def change
drop_table :users do |t|
t.string :name
end
end
endNever call the model layer directly from a view.
Avoid complex formatting in the views. A view helper is useful for simple cases, but if it’s more complex then consider using a decorator or presenter.
Mitigate code duplication by using partial templates and layouts.
Avoid using instance variables in partials, pass a local variable to render instead.
The partial may be used in a different controller or action, where the variable can have a different name or even be absent.
In these cases, an undefined instance variable will not raise an exception whereas a local variable will.
<!-- bad -->
<!-- app/views/courses/show.html.erb -->
<%= render 'course_description' %>
<!-- app/views/courses/_course_description.html.erb -->
<%= @course.description %>
<!-- good -->
<!-- app/views/courses/show.html.erb -->
<%= render 'course_description', course: @course %>
<!-- app/views/courses/_course_description.html.erb -->
<%= course.description %>No strings or other locale specific settings should be used in the views, models and controllers.
These texts should be moved to the locale files in the config/locales directory.
When the labels of an Active Record model need to be translated, use the activerecord scope:
en:
activerecord:
models:
user: Member
attributes:
user:
name: 'Full name'
Then User.model_name.human will return "Member" and User.human_attribute_name("name") will return "Full name".
These translations of the attributes will be used as labels in the views.
Separate the texts used in the views from translations of Active Record attributes.
Place the locale files for the models in a folder locales/models and the texts used in the views in folder locales/views.
When organization of the locale files is done with additional directories, these directories must be described in the application.rb file in order to be loaded.
# config/application.rb
config.i18n.load_path += Dir[Rails.root.join('config', 'locales', '**', '*.{rb,yml}')]Place the shared localization options, such as date or currency formats, in files under the root of the locales directory.
Use the short form of the I18n methods: I18n.t instead of I18n.translate and I18n.l instead of I18n.localize.
Use "lazy" lookup for the texts used in views. Let’s say we have the following structure:
en:
users:
show:
title: 'User details page'
The value for users.show.title can be looked up in the template app/views/users/show.html.haml like this:
= t '.title'Use the dot-separated keys in the controllers and models instead of specifying the :scope option.
The dot-separated call is easier to read and trace the hierarchy.
# bad
I18n.t :record_invalid, scope: [:activerecord, :errors, :messages]
# good
I18n.t 'activerecord.errors.messages.record_invalid'More detailed information about the Rails I18n can be found in the Rails Guides
Use the asset pipeline to leverage organization within your application.
Reserve app/assets for custom stylesheets, javascripts, or images.
Use lib/assets for your own libraries that don’t really fit into the scope of the application.
When possible, use gemified versions of assets (e.g. jquery-rails, jquery-ui-rails, bootstrap-sass, zurb-foundation).
Name the mailers SomethingMailer.
Without the Mailer suffix it isn’t immediately apparent what’s a mailer and which views are related to the mailer.
Provide both HTML and plain-text view templates.
Enable errors raised on failed mail delivery in your development environment. The errors are disabled by default.
# config/environments/development.rb
config.action_mailer.raise_delivery_errors = trueUse a local SMTP server like Mailcatcher in development environment.
# config/environments/development.rb
config.action_mailer.smtp_settings = {
address: 'localhost',
port: 1025,
# more settings
}Provide default settings for the host name.
# config/environments/development.rb
config.action_mailer.default_url_options = { host: "#{local_ip}:3000" }
# config/environments/production.rb
config.action_mailer.default_url_options = { host: 'your_site.com' }
# in your mailer class
default_url_options[:host] = 'your_site.com'Format the from and to addresses properly. Use the following format:
# in your mailer class
default from: 'Your Name <info@your_site.com>'Make sure that the e-mail delivery method for your test environment is set to test:
# config/environments/test.rb
config.action_mailer.delivery_method = :testThe delivery method for development and production should be smtp:
# config/environments/development.rb, config/environments/production.rb
config.action_mailer.delivery_method = :smtpWhen sending html emails all styles should be inline, as some mail clients have problems with external styles. This however makes them harder to maintain and leads to code duplication. There are two similar gems that transform the styles and put them in the corresponding html tags: premailer-rails and roadie.
Sending emails while generating page response should be avoided. It causes delays in loading of the page and request can timeout if multiple email are sent. To overcome this emails can be sent in background process with the help of sidekiq gem.
Prefer Ruby 2.3’s safe navigation operator &. over ActiveSupport#try!.
# bad
obj.try! :fly
# good
obj&.flyPrefer Ruby’s Standard Library methods over ActiveSupport aliases.
# bad
'the day'.starts_with? 'th'
'the day'.ends_with? 'ay'
# good
'the day'.start_with? 'th'
'the day'.end_with? 'ay'Prefer Ruby’s Standard Library over uncommon Active Support extensions.
# bad
(1..50).to_a.forty_two
1.in? [1, 2]
'day'.in? 'the day'
# good
(1..50).to_a[41]
[1, 2].include? 1
'the day'.include? 'day'Prefer Ruby’s comparison operators over Active Support’s Array#inquiry, and String#inquiry.
# bad - String#inquiry
ruby = 'two'.inquiry
ruby.two?
# good
ruby = 'two'
ruby == 'two'
# bad - Array#inquiry
pets = %w(cat dog).inquiry
pets.gopher?
# good
pets = %w(cat dog)
pets.include? 'cat'Configure your timezone accordingly in application.rb.
config.time_zone = 'Eastern European Time'
# optional - note it can be only :utc or :local (default is :utc)
config.active_record.default_timezone = :localDon’t use Time.parse.
# bad
Time.parse('2015-03-02 19:05:37') # => Will assume time string given is in the system's time zone.
# good
Time.zone.parse('2015-03-02 19:05:37') # => Mon, 02 Mar 2015 19:05:37 EET +02:00Don’t use String#to_time
# bad - assumes time string given is in the system's time zone.
'2015-03-02 19:05:37'.to_time
# good
Time.zone.parse('2015-03-02 19:05:37') # => Mon, 02 Mar 2015 19:05:37 EET +02:00Don’t use Time.now.
# bad
Time.now # => Returns system time and ignores your configured time zone.
# good
Time.zone.now # => Fri, 12 Mar 2014 22:04:47 EET +02:00
Time.current # Same thing but shorter.Put gems used only for development or testing in the appropriate group in the Gemfile.
Use only established gems in your projects. If you’re contemplating on including some little-known gem you should do a careful review of its source code first.
OS-specific gems will by default result in a constantly changing Gemfile.lock for projects with multiple developers using different operating systems.
Add all OS X specific gems to a darwin group in the Gemfile, and all Linux specific gems to a linux group:
# Gemfile
group :darwin do
gem 'rb-fsevent'
gem 'growl'
end
group :linux do
gem 'rb-inotify'
endTo require the appropriate gems in the right environment, add the following to config/application.rb:
platform = RUBY_PLATFORM.match(/(linux|darwin)/)[0].to_sym
Bundler.require(platform)Do not remove the Gemfile.lock from version control.
This is not some randomly generated file - it makes sure that all of your team members get the same gem versions when they do a bundle install.
There are a few excellent resources on Rails style, that you should consider if you have time to spare:
Nothing written in this guide is set in stone. It’s my desire to work together with everyone interested in Rails coding style, so that we could ultimately create a resource that will be beneficial to the entire Ruby community.
Feel free to open tickets or send pull requests with improvements. Thanks in advance for your help!
You can also support the project (and RuboCop) with financial contributions via Patreon.
It’s easy, just follow the contribution guidelines below:
-
Fork the project on GitHub
-
Make your feature addition or bug fix in a feature branch.
-
Include a good description of your changes
-
Push your feature branch to GitHub
-
Send a Pull Request
A community-driven style guide is of little use to a community that doesn’t know about its existence. Tweet about the guide, share it with your friends and colleagues. Every comment, suggestion or opinion we get makes the guide just a little bit better. And we want to have the best possible guide, don’t we?
Cheers,
Bozhidar