v1.2.1

This release hotfixes issues from moving a new CI/CD system. Featurewise the functionality is the same as v1.2.0.

Fixed

• Fixed CI/CD issue where environment variables were not being passed into the underlying build

v1.2.1-rc0

This release hotfixes issues from moving a new CI/CD system. Featurewise the functionality is the same as v1.2.0.

Fixed

• Fixed CI/CD issue where environment variables were not being passed into the underlying build

v1.2.0

Added

• Added support for the Nethermind Ethereum client.
• Added support for batch sending telemetry to the ingress server to improve performance.
• Added v2 P2P networking support (alpha)

New ENV vars:

• ADVISORY_LOCK_CHECK_INTERVAL (default: 1s) - when advisory locking mode is enabled, this controls how often Chainlink checks to make sure it still holds the advisory lock. It is recommended to leave this at the default.
• ADVISORY_LOCK_ID (default: 1027321974924625846) - when advisory locking mode is enabled, the application advisory lock ID can be changed using this env var. All instances of Chainlink that might run on a particular database must share the same advisory lock ID. It is recommended to leave this at the default.
• LOG_FILE_DIR (default: chainlink root directory) - if LOG_TO_DISK is enabled, this env var allows you to override the output directory for logging.
• SHUTDOWN_GRACE_PERIOD (default: 5s) - when node is shutting down gracefully and exceeded this grace period, it terminates immediately (trying to close DB connection) to avoid being SIGKILLed.
• SOLANA_ENABLED (default: false) - set to true to enable Solana support
• TERRA_ENABLED (default: false) - set to true to enable Terra support
• BLOCK_HISTORY_ESTIMATOR_EIP1559_FEE_CAP_BUFFER_BLOCKS - if EIP1559 mode is enabled, this optional env var controls the buffer blocks to add to the current base fee when sending a transaction. By default, the gas bumping threshold + 1 block is used. It is not recommended to change this unless you know what you are doing.
• TELEMETRY_INGRESS_BUFFER_SIZE (default: 100) - the number of telemetry messages to buffer before dropping new ones
• TELEMETRY_INGRESS_MAX_BATCH_SIZE (default: 50) - the maximum number of messages to batch into one telemetry request
• TELEMETRY_INGRESS_SEND_INTERVAL (default: 500ms) - the cadence on which batched telemetry is sent to the ingress server
• TELEMETRY_INGRESS_USE_BATCH_SEND (default: true) - toggles sending telemetry using the batch client to the ingress server

Bootstrap job

Added a new bootstrap job type. This job removes the need for every job to implement their own bootstrapping logic.
OCR2 jobs with isBootstrapPeer=true are automatically migrated to the new format.
The spec parameters are similar to a basic OCR2 job, an example would be:

type            = "bootstrap"
name            = "bootstrap"
relay           = "evm"
schemaVersion	= 1
contractID      = "0xAb5801a7D398351b8bE11C439e05C5B3259aeC9B"
[relayConfig]
chainID	        = 4

Removed

• deleteuser CLI command.

Changed

EVM_DISABLED has been deprecated and replaced by EVM_ENABLED for consistency with other feature flags.
ETH_DISABLED has been deprecated and replaced by EVM_RPC_ENABLED for consistency, and because this was confusingly named. In most cases you want to set EVM_ENABLED=false and not EVM_RPC_ENABLED=false.

Log colorization is now disabled by default because it causes issues when piped to text files. To re-enable log colorization, set LOG_COLOR=true.

Polygon/matic defaults changed

Due to increasingly hostile network conditions on Polygon we have had to increase a number of default limits. This is to work around numerous and very deep re-orgs, high mempool pressure and a failure by the network to propagate transactions properly. These new limits are likely to increase load on both your Chainlink node and database, so please be sure to monitor CPU and memory usage on both and make sure they are adequately specced to handle the additional load.

v1.1.1

Added

• BLOCK_HISTORY_ESTIMATOR_EIP1559_FEE_CAP_BUFFER_BLOCKS - if EIP1559 mode is enabled, this optional env var controls the buffer blocks to add to the current base fee when sending a transaction. By default, the gas bumping threshold + 1 block is used. It is not recommended to change this unless you know what you are doing.
• EVM_GAS_FEE_CAP_DEFAULT - if EIP1559 mode is enabled, and FixedPrice gas estimator is used, this env var controls the fixed initial fee cap.

Fixed

Fixed issues with EIP-1559 related to gas bumping. Due to go-ethereum's implementation which introduces additional restrictions on top of the EIP-1559 spec, we must bump the FeeCap at least 10% each time in order for the gas bump to be accepted.

The new EIP-1559 implementation works as follows:

If you are using FixedPriceEstimator:

• With gas bumping disabled, it will submit all transactions with feecap=ETH_MAX_GAS_PRICE_WEI and tipcap=EVM_GAS_TIP_CAP_DEFAULT
• With gas bumping enabled, it will submit all transactions initially with feecap=EVM_GAS_FEE_CAP_DEFAULT and tipcap=EVM_GAS_TIP_CAP_DEFAULT.

If you are using BlockHistoryEstimator (default for most chains):

• With gas bumping disabled, it will submit all transactions with feecap=ETH_MAX_GAS_PRICE_WEI and tipcap=<calculated using past blocks>
• With gas bumping enabled (default for most chains) it will submit all transactions initially with feecap=current block base fee * (1.125 ^ N) where N is configurable by setting BLOCK_HISTORY_ESTIMATOR_EIP1559_FEE_CAP_BUFFER_BLOCKS but defaults to gas bump threshold+1 and tipcap=<calculated using past blocks>

Bumping works as follows:

• Increase tipcap by max(tipcap * (1 + ETH_GAS_BUMP_PERCENT), tipcap + ETH_GAS_BUMP_WEI)
• Increase feecap by max(feecap * (1 + ETH_GAS_BUMP_PERCENT), feecap + ETH_GAS_BUMP_WEI)

v1.1.0

[1.1.0] - 2022-01-25

Added

• Added support for Sentry error reporting. Set SENTRY_DSN at compile- or run-time to enable reporting.
• Added Prometheus counters: log_warn_count, log_error_count, log_critical_count, log_panic_count and log_fatal_count representing the corresponding number of warning/error/critical/panic/fatal messages in the log.
• The new prometheus metric tx_manager_tx_attempt_count is a Prometheus Gauge that should represent the total number of Transactions attempts that awaiting confirmation for this node.
• The new prometheus metric version that displays the node software version (tag) as well as the corresponding commit hash.
• CLI command keys eth list is updated to display key specific max gas prices.
• CLI command keys eth create now supports optional maxGasPriceGWei parameter.
• CLI command keys eth update is added to update key specific parameters like maxGasPriceGWei.
• Add partial support for Moonriver chain

Two new log levels have been added.

• [crit]: Critical level logs are more severe than [error] and require quick action from the node operator.
• [debug] [trace]: Trace level logs contain extra [debug] information for development, and must be compiled in via -tags trace.

[Beta] Multichain support added

As a beta feature, Chainlink now supports connecting to multiple different EVM chains simultaneously.

This means that one node can run jobs on Goerli, Kovan, BSC and Mainnet (for example). Note that you can still have as many eth keys as you like, but each eth key is pegged to one chain only.

Extensive efforts have been made to make migration for existing nops as seamless as possible. Generally speaking, you should not have to make any changes when upgrading your existing node to this version. All your jobs will continue to run as before.

The overall summary of changes is such:

Chains/Ethereum Nodes

EVM chains are now represented as a first class object within the chainlink node. You can create/delete/list them using the CLI or API.

At least one primary node is required in order for a chain to connect. You may additionally specify zero or more send-only nodes for a chain. It is recommended to use the CLI/API or GUI to add nodes to chain.

Creation

chainlink chains evm create -id 42 # creates an evm chain with chain ID 42 (see: https://chainlist.org/)
chainlink nodes create -chain-id 42 -name 'my-primary-kovan-full-node' -type primary -ws-url ws://node.example/ws -http-url http://node.example/rpc # http-url is optional but recommended for primaries
chainlink nodes create -chain-id 42 -name 'my-send-only-backup-kovan-node' -type sendonly -http-url http://some-public-node.example/rpc

Listing

chainlink chains evm list
chainlink nodes list

Deletion

chainlink nodes delete 'my-send-only-backup-kovan-node'
chainlink chains evm delete 42

Legacy eth ENV vars

The old way of specifying chains using environment variables is still supported but discouraged. It works as follows:

If you specify ETH_URL then the values of ETH_URL, ETH_CHAIN_ID, ETH_HTTP_URL and ETH_SECONDARY_URLS will be used to create/update chains and nodes representing these values in the database. If an existing chain/node is found it will be overwritten. This behavior is used mainly to ease the process of upgrading, and on subsequent runs (once your old settings have been written to the database) it is recommended to unset these ENV vars and use the API commands exclusively to administer chains and nodes.

Jobs/tasks

By default, all jobs/tasks will continue to use the default chain (specified by ETH_CHAIN_ID). However, the following jobs now allow an additional evmChainID key in their TOML:

• VRF
• DirectRequest
• Keeper
• OCR
• Fluxmonitor

You can pin individual jobs to a particular chain by specifying the evmChainID explicitly. Here is an example job to demonstrate:

type            = "keeper"
evmChainID      = 3
schemaVersion   = 1
name            = "example keeper spec"
contractAddress = "0x9E40733cC9df84636505f4e6Db28DCa0dC5D1bba"
externalJobID   = "0EEC7E1D-D0D2-476C-A1A8-72DFB6633F49"
fromAddress     = "0xa8037A20989AFcBC51798de9762b351D63ff462e"

The above keeper job will always run on chain ID 3 (Ropsten) regardless of the ETH_CHAIN_ID setting. If no chain matching this ID has been added to the chainlink node, the job cannot be created (you must create the chain first).

In addition, you can also specify evmChainID on certain pipeline tasks. This allows for cross-chain requests, for example:

type                = "directrequest"
schemaVersion       = 1
evmChainID          = 42
name                = "example cross chain spec"
contractAddress     = "0x613a38AC1659769640aaE063C651F48E0250454C"
externalJobID       = "0EEC7E1D-D0D2-476C-A1A8-72DFB6633F90"
observationSource   = """
    decode_log   [type=ethabidecodelog ... ]
    ...
    submit [type=ethtx to="0x613a38AC1659769640aaE063C651F48E0250454C" data="$(encode_tx)" minConfirmations="2" evmChainID="3"]
    decode_log-> ... ->submit;
"""

In the example above (which excludes irrelevant pipeline steps for brevity) a log can be read from the chain with ID 42 (Kovan) and a transaction emitted on chain with ID 3 (Ropsten).

Tasks that support the evmChainID parameter are as follows:

• ethcall
• estimategaslimit
• ethtx

Defaults

If the job- or task-specific evmChainID is not given, the job/task will simply use the default as specified by the ETH_CHAIN_ID env variable.

Generally speaking, the default config values for each chain are good enough. But in some cases it is necessary to be able to override the defaults on a per-chain basis.

This used to be done via environment variables e.g. MINIMUM_CONTRACT_PAYMENT_LINK_JUELS.

These still work, but if set they will override that value for all chains. This may not always be what you want. Consider a node that runs both Matic and Mainnet. You may want to set a higher value for MINIMUM_CONTRACT_PAYMENT on Mainnet, due to the more expensive gas costs. However, setting MINIMUM_CONTRACT_PAYMENT_LINK_JUELS using env variables will set that value for all chains including matic.

To help you work around this, Chainlink now supports setting per-chain configuration options.

Examples

To set initial configuration when creating a chain, pass in the full json string as an optional parameter at the end:

chainlink evm chains create -id 42 '{"BlockHistoryEstimatorBlockDelay": "100"}'

To set configuration on an existing chain, specify key values pairs as such:

chainlink evm chains configure -id 42 BlockHistoryEstimatorBlockDelay=100 GasEstimatorMode=FixedPrice

The full list of chain-specific configuration options can be found by looking at the ChainCfg struct in core/chains/evm/types/types.go.

Async support in external adapters

External Adapters making async callbacks can now error job runs. This required a slight change to format, the correct way to callback from an asynchronous EA is using the following JSON:

SUCCESS CASE:

{
    "value": < any valid json object >
}

ERROR CASE:

{
    "error": "some error string"
}

This only applies to EAs using the X-Chainlink-Pending header to signal that the result will be POSTed back to the Chainlink node sometime 'later'. Regular synchronous calls to EAs work just as they always have done.

(NOTE: Official documentation for EAs needs to be updated)

New optional VRF v2 field: requestedConfsDelay

Added a new optional field for VRF v2 jobs called requestedConfsDelay, which configures a
number of blocks to wait in addition to the request specified requestConfirmations before servicing
the randomness request, i.e the Chainlink node will wait max(nodeMinConfs, requestConfirmations + requestedConfsDelay)
blocks before servicing the request.

It can be used in the following way:

type = "vrf"
externalJobID = "123e4567-e89b-12d3-a456-426655440001"
schemaVersion = 1
name = "vrf-v2-secondary"
coordinatorAddress = "0xABA5eDc1a551E55b1A570c0e1f1055e5BE11eca7"
requestedConfsDelay = 10
# ... rest of job spec ...

Use of this field requires a database migration.

New locking mode: 'lease'

Chainlink now supports a new environment variable DATABASE_LOCKING_MODE. It can be set to one of the following values:

• dual (the default - uses both locking types for backwards and forwards compatibility)
• advisorylock (advisory lock only)
• lease (lease lock only)
• none (no locking at all - useful for advanced deployment environments when you can be sure that only one instance of chainlink will ever be running)

The database lock ensures that only one instance of Chainlink can be run on the database at a time. Running multiple instances of Chainlink on a single database at the same time would likely to lead to strange errors and possibly even data integrity failures and should not be allowed.

Ideally, node operators would be using a container orchestration system (e.g. Kubernetes) that ensures that only one instance of Chainlink ever runs on a particular postgres database.

However, we are aware that many node operators do not have the technical capacity to do this. So a common use case is to run multiple Chainlink instances in failover mode (as recommended by our official documentation, although this will be changing in future). The first instance will take some kind of lock on the database and subsequent instances will wait trying to take this lock in case the first instance disappears or dies.

Traditionally Chainlink has used an advisory lock to manage this. However, advisory locks come with several prob...

v1.0.1

Added

• Improved error reporting
• Panic and recovery improvements

Fixed

• Resolved config conversion errors for ETH_FINALITY_DEPTH, ETH_HEAD_TRACKER_HISTORY, and ETH_GAS_LIMIT_MULTIPLIER
• Proper handling for "nonce too low" errors on Avalanche

v1.0.0

Added

• chainlink node db status will now display a table of applied and pending migrations.
• Add support for OKEx/ExChain.

Changed

Legacy job pipeline (JSON specs) are no longer supported

This version will refuse to migrate the database if job specs are still present. You must manually delete or migrate all V1 job specs before upgrading.

For more information on migrating, see the docs.

This release will DROP legacy job tables so please take a backup before upgrading.

New env vars

LAYER_2_TYPE - For layer 2 chains only. Configure the type of chain, either Arbitrum or Optimism.

Misc

• Head sampling can now be optionally disabled by setting ETH_HEAD_TRACKER_SAMPLING_INTERVAL = "0s" - this will result in every new head being delivered to running jobs,
  regardless of the head frequency from the chain.
• When creating new FluxMonitor jobs, the validation logic now checks that only one of: drumbeat ticker or idle timer is enabled.
• Added a new Prometheus metric: uptime_seconds which measures the number of seconds the node has been running. It can be helpful in detecting potential crashes.

Fixed

Fixed a regression whereby the BlockHistoryEstimator would use a bumped value on old gas price even if the new current price was larger than the bumped value.

v0.10.15

It is highly recommended to upgrade to this version before upgrading to any newer versions to avoid any complications.

Fixed

• Prevent release from clobbering newer databases

v0.10.14

Added

• FMv2 spec now contains DrumbeatRandomDelay parameter that can be used to introduce variation between round of submits of different oracles, if drumbeat ticker is enabled.

• OCR Hibernation

Requesters/MinContractPaymentLinkJuels

V2 direct request specs now support two additional keys:

• "requesters" key which allows to whitelist requesters
• "minContractPaymentLinkJuels" key which allows to specify a job-specific minimum contract payment.

For example:

type                        = "directrequest"
schemaVersion               = 1
requesters                  = ["0xaaaa1F8ee20f5565510B84f9353F1E333E753B7a", "0xbbbb70F0e81C6F3430dfdC9fa02fB22BdD818C4e"] # optional
minContractPaymentLinkJuels = "100000000000000" # optional
name                        = "example eth request event spec with requesters"
contractAddress             = "..."
externalJobID               = "..."
observationSource           = """
...
"""

v0.10.13

Fixed

• Resolved exiting Hibernation bug on FMv2