A3COM-HUAWEI-LswMix-MIB

-- ------------------------------------------------------------------
--
-- Description: HuaWei Lan Switch Dual Main Control MIB
--
-- Version: V1.2
-- History:
-- Revise History: 1) 2003-03-27 Fuzhenyu created
-- V1.1 2004-10-12 updated by gaolong
--      Import NOTIFICATION-TYPE.
--      MAX-ACCESS clause value from write-only to read-write.
--      Substitute hwsMixTrapMib MODULE-IDENTITY with hwsMixTrapMib OBJECT IDENTIFIER.
-- V1.2 2005-11-14
--      updated by Chen Xi
--      Modify description of all objects except hwLswXSlotTable and hwLswXSlotEntry.
--      updated by Yu Lan
--      Add process(3) value for hwLswMainCardBoardStatus.
--      Add hwLswCrossBarStatus.
-- ------------------------------------------------------------------
--
-- ------------------------------------------------------------------
--
-- Variable imported
--
-- ------------------------------------------------------------------
A3COM-HUAWEI-LswMix-MIB DEFINITIONS ::= BEGIN

IMPORTS

    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE
        FROM SNMPv2-SMI
    hwLswFrameIndex,hwLswSlotIndex
        FROM A3COM-HUAWEI-DEVICE-MIB
    lswCommon
        FROM A3COM-HUAWEI-OID-MIB;

--  the document include the private data about device
-- ******************************beginning  ******************************
--
-- ------------------------------------------------------------------
    hwLswMix MODULE-IDENTITY
            LAST-UPDATED "200106290000Z"
            ORGANIZATION ""
            CONTACT-INFO
            ""
            DESCRIPTION
            ""
            REVISION "200106290000Z"
            DESCRIPTION
            ""
            ::= { lswCommon  17 }


--  the document include the private data about device mix

hwLswLastSwitchDate OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
    "This object indicates the date of the most recent change
    to the mpu(Main Processing Unit). "
    ::= { hwLswMix 1 }

hwLswLastSwitchTime OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
    "This object indicates the time of the most recent change
    to the mpu. "
    ::= { hwLswMix 2 }

hwLswMpuSwitchsNum OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
    "This object indicates the total times of the mpu switched
    since the system start up. "
    ::= { hwLswMix 3 }

hwLswMpuSwitch OBJECT-TYPE
    SYNTAX INTEGER{
        switch(1)
    }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
    "Setting this object will immediately switch the standby mpu
    to master mpu. Read is not supported. "
    ::= { hwLswMix 4 }

--  the document include the private data about main card
hwLswXSlotTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF HwLswXSlotEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
    "The source main table."
     ::= { hwLswMix 5 }

hwLswXSlotEntry OBJECT-TYPE
    SYNTAX  HwLswXSlotEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
    "An entry in the source main table."
    INDEX   { hwLswFrameIndex, hwLswSlotIndex }
     ::= { hwLswXSlotTable 1 }

HwLswXSlotEntry ::=
    SEQUENCE {
        hwLswMainCardBoardStatus        INTEGER,
        hwLswCrossBarStatus            INTEGER
    }

hwLswMainCardBoardStatus OBJECT-TYPE
    SYNTAX  INTEGER{
      master(1),
      standby(2),
      process(3)
    }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
       "The value describes whether the board is master, standby or process.
       master and standby are the possible states for the mpu, while process
       indicates the state of lpu(Line Processing Unit)"
     ::= { hwLswXSlotEntry 1 }

hwLswCrossBarStatus OBJECT-TYPE
    SYNTAX INTEGER{
       master(1),
       standby(2)
       }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "The value describes whether the crossbar is master or standby. It is
       master when it's in the master mpu board, standby when in the standby mpu.
       But both crossbars in mpus are master when the device in load-balance mode."
    ::= { hwLswXSlotEntry 2 }

   hwsMixTrapMib OBJECT IDENTIFIER        ::= { hwLswMix  10 }

   hwSlaveSwitchOver NOTIFICATION-TYPE
      STATUS  current
      DESCRIPTION
      "An hwSlaveSwitchOver trap signifies that the action of
      standby mpu switching to master has completed. "
      ::= { hwsMixTrapMib 1 }

END