A3COM-HUAWEI-DOT11-ROAM-MIB

-- =====================================================================
-- Copyright (c) 2004-2010 by Hangzhou H3C Technologies. All rights reserved.
--
-- Description: The file defines a MIB to provide WLAN roaming configuration.
-- Reference:
-- Version: V1.2
-- History:
-- V1.0 2008-7-23 created by heziqi
-- V1.1 2009-05-07 modified by Li Yugang
--      Add h3cDot11RoamStatisGroup to h3cDot11ROAM.
-- V1.2 2009-12-24 modified for Guangdong Mobile
--      Add h3cDot11InterACRoamOutSuccCnt to h3cDot11RoamStatisGroup.
--      2010-08-04 modefied by l07769 for Guangdong CMCC
--      Add h3cDot11IntraACRoamingSuccCnt2, h3cDot11InterACRoamingSuccCnt2
--      and h3cDot11InterACRoamOutSuccCnt2 to h3cDot11RoamStatis2Group.
-- =====================================================================
A3COM-HUAWEI-DOT11-ROAM-MIB DEFINITIONS ::= BEGIN

IMPORTS
        TruthValue,
        MacAddress,
        RowStatus,
        TEXTUAL-CONVENTION
    FROM SNMPv2-TC
        MODULE-IDENTITY,
        OBJECT-TYPE,
        Integer32
    FROM SNMPv2-SMI
        InetAddressType,
        InetAddress
    FROM INET-ADDRESS-MIB
        h3cDot11
    FROM A3COM-HUAWEI-DOT11-REF-MIB;

h3cDot11ROAM MODULE-IDENTITY
    LAST-UPDATED "201008041800Z"        -- Aug 04, 2010 at 18:00 GMT
    ORGANIZATION
        "Hangzhou H3C Technologies Co., Ltd."
    CONTACT-INFO
        "Platform Team Hangzhou H3C Technologies Co., Ltd.
         Hai-Dian District Beijing P.R.China
         Http://www.h3c.com
         Zip:100085"
    DESCRIPTION
        "This MIB provides information about WLAN roaming configuration.

        GLOSSARY

        IEEE 802.11
        Standard to encourage interoperability among
        wireless networking equipment.

        Access point (AP)
        Transmitter/receiver (transceiver) device
        that commonly connects and transports data
        between a wireless network and a wired network.

        Access control (AC)
        To control and manage multi-APs, it will bridge
        wireless and wired network.

        BSS
        IEEE 802.11 Basic Service Set (Radio Cell).  The
        BSS of an AP comprises of the stations directly
        associating with the AP.

        Radio
        The chip set to receive and send wireless signal.

        HA
        The AC to which a wireless station is connected by
        associating with an AP for the first time is the
        HA of the station.

        FA
        An AC that is other than the HA and to which a
        station is currently connected is an FA of the
        station.

        Fast-roam capable station
        A wireless station which directly associates to
        a fast-roam service (rsn+dot1X) with one AC for
        the first time.

        Roam-out station
        A wireless station which has associated with an
        AC other than the HA in the mobility-group is
        referred to as a roam-out station at its HA.

        Roam-in station
        A wireless station which has associated with an
        AC other than the HA in the mobility-group is
        referred to as a roam-in station at the FA.

        Intra-AC roaming
        A procedure where a wireless station roams from
        one AP to another AP, which are connected to the
        same AC.

        Inter-AC roaming
        A procedure where a wireless station roams from
        one AP to another AP, which are connected to
        different ACs.

        Inter-AC fast roaming capability
        If a station uses 802.1x (RSN) authentication
        through negotiation, this station has inter-AC
        fast roaming capability.

        WLAN-tunnel
        One type of layer 2 interface which is bound with
        an IACTP data tunnel and used to tunnel
        unicast/broadcast frames between ACs."

    REVISION "201008041800Z"        -- Aug 04, 2010 at 18:00 GMT
    DESCRIPTION
            "Modified to add new h3cDot11RoamStatis2Group."
    REVISION "200905072000Z"
    DESCRIPTION
            "Modified to add new h3cDot11RoamStatisGroup."
    REVISION "200807231200Z"
    DESCRIPTION
            "The initial revision of this MIB module."
    ::= { h3cDot11 10 }

-- ==================================================================
-- Textual Conventions
-- ==================================================================
H3cDot11RoamMobileTunnelType ::=  TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The protocol type of the mobility-tunnel.
        This object has two defined values:
        - 'ipv4', which indicates that the protocol type of the mobility-tunnel
          is IPv4.
        - 'ipv6', which indicates that the protocol type of the mobility-tunnel
          is IPv6.
        "
    SYNTAX      INTEGER
        {
            ipv4(1),
            ipv6(2)
        }

H3cDot11RoamAuthMode ::=  TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The authentication mode of the mobility-tunnel.
        This object has two defined values:
        - 'none', which indicates that the authentication mode of the
          mobility-tunnel is None.
        - 'md5', which indicates that the authentication mode of the
          mobility-tunnel is MD5.
        "
    SYNTAX      INTEGER
        {
            none(1),
            md5(2)
        }

H3cDot11RoamIACTPStatus ::=  TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The status of IACTP state machine."
    SYNTAX      INTEGER
        {
            init(1),
            idle(2),
            joinRequestWait(3),
            joinResponseWait(4),
            joinConfirmWait(5),
            joinError(6),
            run(7)
        }

-- ==================================================================
-- Major sections
-- ==================================================================
h3cDot11RoamCfgGroup OBJECT IDENTIFIER  ::= { h3cDot11ROAM 1 }
--  Roaming Configuration Group has the following children:
--  h3cDot11MobGrpTable            ::= { h3cDot11RoamCfgGroup 1 }
--  h3cDot11MobGrpMemberTable      ::= { h3cDot11RoamCfgGroup 2 }

h3cDot11RoamStatusGroup OBJECT IDENTIFIER  ::= { h3cDot11ROAM 2 }
--  Roaming Status Group has the following children:
--  h3cDot11RoamInInfoTable             ::= { h3cDot11RoamStatusGroup 1 }
--  h3cDot11RoamOutInfoTable            ::= { h3cDot11RoamStatusGroup 2 }
--  h3cDot11RoamTrackTable              ::= { h3cDot11RoamStatusGroup 3 }

h3cDot11RoamStatisGroup OBJECT IDENTIFIER  ::= { h3cDot11ROAM 3 }
--  Roaming Statis Group has the following children:
--  h3cDot11IntraACRoamingSuccCnt       ::= { h3cDot11RoamStatusGroup 1 }
--  h3cDot11InterACRoamingSuccCnt       ::= { h3cDot11RoamStatusGroup 2 }

h3cDot11RoamStatis2Group OBJECT IDENTIFIER  ::= { h3cDot11ROAM 4 }
--  Roaming Statis Group has the following children:
--  h3cDot11IntraACRoamingSuccCnt2     ::= { h3cDot11RoamStatus2Group 1 }
--  h3cDot11InterACRoamingSuccCnt2     ::= { h3cDot11RoamStatus2Group 2 }
--  h3cDot11InterACRoamOutSuccCnt2     ::= { h3cDot11RoamStatus2Group 3 }

-- ==================================================================
-- h3cDot11RoamCfgGroup Definition
-- ==================================================================
-- ==================================================================
-- h3cDot11MobGrpTable Definition
-- ==================================================================
h3cDot11MobGrpTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF H3cDot11MobGrpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The table defines the parameters for roaming group configuration."
    ::= { h3cDot11RoamCfgGroup 1 }

h3cDot11MobGrpEntry OBJECT-TYPE
    SYNTAX      H3cDot11MobGrpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This entry contains information of mobile group."
    INDEX
        {
            h3cDot11MobGrpName
        }
    ::= { h3cDot11MobGrpTable 1 }

H3cDot11MobGrpEntry ::= SEQUENCE
    {
        h3cDot11MobGrpName        OCTET STRING,
        h3cdot11MobGrpTunnelType  H3cDot11RoamMobileTunnelType,
        h3cDot11MobGrpSrcIPAddr   InetAddress,
        h3cDot11MobGrpAuthMode    H3cDot11RoamAuthMode,
        h3cDot11MobGrpAuthKey     OCTET STRING,
        h3cDot11MobGrpEnable      TruthValue,
        h3cDot11MobGrpRowStatus   RowStatus
    }

h3cDot11MobGrpName OBJECT-TYPE
    SYNTAX      OCTET STRING(SIZE(1..15))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Represents the name of roam group."
    ::= { h3cDot11MobGrpEntry 1 }

h3cdot11MobGrpTunnelType OBJECT-TYPE
    SYNTAX      H3cDot11RoamMobileTunnelType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Represents the protocol type of mobility-tunnel."
    DEFVAL      { ipv4 }
    ::= { h3cDot11MobGrpEntry 2 }

h3cDot11MobGrpSrcIPAddr OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Represents the IP address of tunnel source.  The IP address
         type must be the same as h3cdot11MobGrpTunnelType.
         The default value is zero."
    ::= { h3cDot11MobGrpEntry 3 }

h3cDot11MobGrpAuthMode OBJECT-TYPE
    SYNTAX      H3cDot11RoamAuthMode
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Represents the authentication mode of IACTP tunnel.
         This object can be used to enable IACTP control message
         integrity authentication."
    DEFVAL      { none }
    ::= { h3cDot11MobGrpEntry 4 }

h3cDot11MobGrpAuthKey OBJECT-TYPE
    SYNTAX      OCTET STRING(SIZE(0..16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Represents the authentication key of IACTP tunnel.
         Authentication key to be used with the given
         authentication method.
         This object can not be modified when the value of
         h3cDot11MobGrpAuthMode is 'none'."
    ::= { h3cDot11MobGrpEntry 5 }

h3cDot11MobGrpEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "State of a mobile group.
         'true'  : The WLAN mobility group will be enabled.
         'false' : The inter-AC tunnel communication for the
                   mobility group will be disabled.
         A mobility group can be enabled only when the source
         IP address is configured.  The other objects in this entry
         can become effective only when mobility group is enabled.
         The other objects in this entry can not be modified
         after enabling mobility group."
    DEFVAL      { false }
    ::= { h3cDot11MobGrpEntry 6 }

h3cDot11MobGrpRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The status of this table entry."
    ::= { h3cDot11MobGrpEntry 7 }

-- ==================================================================
-- h3cDot11MobGrpMemberTable Definition
-- ==================================================================

h3cDot11MobGrpMemberTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF H3cDot11MobGrpMemberEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The table defines the parameters for roaming member configuration."
    ::= { h3cDot11RoamCfgGroup 2 }

h3cDot11MobGrpMemberEntry OBJECT-TYPE
    SYNTAX      H3cDot11MobGrpMemberEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This entry contains information of mobile group member."
    INDEX
        {
            h3cDot11MobGrpName,
            h3cDot11MobGrpMemberIpAddr
        }
    ::= { h3cDot11MobGrpMemberTable 1 }

H3cDot11MobGrpMemberEntry ::= SEQUENCE
    {
        h3cDot11MobGrpMemberIpAddr      InetAddress,
        h3cDot11MobGrpMemberStatus      H3cDot11RoamIACTPStatus,
        h3cDot11MobGrpMemberIf          OCTET STRING,
        h3cDot11MobGrpMemberUpTime      Integer32,
        h3cDot11MobGrpMemberRowStatus   RowStatus
    }

h3cDot11MobGrpMemberIpAddr OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Represents the IP address of group member.  It can not be
         the same as the source IP address of the mobile group.
         The address type must be the same as the h3cdot11MobGrpTunnelType."
    ::= { h3cDot11MobGrpMemberEntry 1 }

h3cDot11MobGrpMemberStatus OBJECT-TYPE
    SYNTAX      H3cDot11RoamIACTPStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the status of group member."
    ::= { h3cDot11MobGrpMemberEntry 2 }

h3cDot11MobGrpMemberIf OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the tunnel interface name of group member."
    ::= { h3cDot11MobGrpMemberEntry 3 }

h3cDot11MobGrpMemberUpTime OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "second"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the sustaining time from tunnel up.  If tunnel
         is down, MemberUpTime is zero."
    ::= { h3cDot11MobGrpMemberEntry 4 }

h3cDot11MobGrpMemberRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The status of this table entry."
    ::= { h3cDot11MobGrpMemberEntry 5 }

-- ==================================================================
-- h3cDot11RoamStatusGroup Definition
-- ==================================================================
-- ==================================================================
-- h3cDot11RoamInInfoTable Definition
-- ==================================================================
h3cDot11RoamInInfoTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF H3cDot11RoamInInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The table can used to display the information of roaming in client."
    ::= { h3cDot11RoamStatusGroup 1 }

h3cDot11RoamInInfoEntry OBJECT-TYPE
    SYNTAX      H3cDot11RoamInInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This entry contains information of roaming in client."
    INDEX
        {
            h3cDot11RoamClientMAC
        }
    ::= { h3cDot11RoamInInfoTable 1 }

H3cDot11RoamInInfoEntry ::= SEQUENCE
    {
        h3cDot11RoamClientMAC         MacAddress,
        h3cDot11RoamInClientBSSID     MacAddress,
        h3cDot11RoamInClientVlanID    Integer32,
        h3cDot11RoamInHomeACIPType    InetAddressType,
        h3cDot11RoamInHomeACIPAddr    InetAddress
    }

h3cDot11RoamClientMAC OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Represents the MAC address of roaming in client."
    ::= { h3cDot11RoamInInfoEntry 1 }

h3cDot11RoamInClientBSSID OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents BSSID of the AP to which the Roam-In client is associated."
    ::= { h3cDot11RoamInInfoEntry 2 }

h3cDot11RoamInClientVlanID OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the VLAN ID of Roam-In client."
    ::= { h3cDot11RoamInInfoEntry 3 }

h3cDot11RoamInHomeACIPType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the protocol type of home AC address."
    ::= { h3cDot11RoamInInfoEntry 4 }

h3cDot11RoamInHomeACIPAddr OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the address of home AC."
    ::= { h3cDot11RoamInInfoEntry 5 }

-- ==================================================================
-- h3cDot11RoamOutInfoTable Definition
-- ==================================================================

h3cDot11RoamOutInfoTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF H3cDot11RoamOutInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The table can used to display the information of roaming out client."
    ::= { h3cDot11RoamStatusGroup 2 }

h3cDot11RoamOutInfoEntry OBJECT-TYPE
    SYNTAX      H3cDot11RoamOutInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This entry contains information of roaming out client."
    INDEX
        {
            h3cDot11RoamClientMAC
        }
    ::= { h3cDot11RoamOutInfoTable 1 }

H3cDot11RoamOutInfoEntry ::= SEQUENCE
    {
        h3cDot11RoamOutClientBSSID       MacAddress,
        h3cDot11RoamOutClientVlanID      Integer32,
        h3cDot11RoamOutForeignACIPType   InetAddressType,
        h3cDot11RoamOutForeignACIPAddr   InetAddress,
        h3cDot11RoamOutClientUpTime      Integer32
    }

h3cDot11RoamOutClientBSSID OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the BSSID of the AP to which the Roam-Out client is
         associated."
    ::= { h3cDot11RoamOutInfoEntry 1 }

h3cDot11RoamOutClientVlanID OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the VLAN ID of Roam-Out client."
    ::= { h3cDot11RoamOutInfoEntry 2 }

h3cDot11RoamOutForeignACIPType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the protocol type of foreign AC address."
    ::= { h3cDot11RoamOutInfoEntry 3 }

h3cDot11RoamOutForeignACIPAddr OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the address of foreign AC."
    ::= { h3cDot11RoamOutInfoEntry 4 }

h3cDot11RoamOutClientUpTime OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "second"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents how long the Roam-Out client is associated with the foreign
         AC."
    ::= { h3cDot11RoamOutInfoEntry 5 }

-- ==================================================================
-- h3cDot11RoamTrackTable Definition
-- ==================================================================
h3cDot11RoamTrackTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF H3cDot11RoamTrackEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The table contains the roam-track information of a
         specified client on the client's HA."
    ::= { h3cDot11RoamStatusGroup 3 }

h3cDot11RoamTrackEntry OBJECT-TYPE
    SYNTAX      H3cDot11RoamTrackEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This entry contains information of a specified client on the
         client's HA."
    INDEX
        {
            h3cDot11RoamTrackIndex
        }
    ::= { h3cDot11RoamTrackTable 1 }

H3cDot11RoamTrackEntry ::= SEQUENCE
    {
        h3cDot11RoamTrackIndex        Integer32,
        h3cDot11RoamTrackClientMAC    MacAddress,
        h3cDot11RoamTrackBSSID        MacAddress,
        h3cDot11RoamTrackUpTime       Integer32,
        h3cDot11RoamTrackACIPType     InetAddressType,
        h3cDot11RoamTrackACIPAddr     InetAddress
    }

h3cDot11RoamTrackIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Represents the index of this entry."
    ::= { h3cDot11RoamTrackEntry 1 }

h3cDot11RoamTrackClientMAC OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the MAC address of the roamed client."
    ::= { h3cDot11RoamTrackEntry 2 }

h3cDot11RoamTrackBSSID OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the BSSID of the AP with which the client is associated."
    ::= { h3cDot11RoamTrackEntry 3 }

h3cDot11RoamTrackUpTime OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "second"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents how long the client is associated with the BSSID."
    ::= { h3cDot11RoamTrackEntry 4 }

h3cDot11RoamTrackACIPType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the protocol type of the IP address of the access
         controller with which the client is connected."
    ::= { h3cDot11RoamTrackEntry 5 }

h3cDot11RoamTrackACIPAddr OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the IP address of the access controller with which
         the client is connected."
    ::= { h3cDot11RoamTrackEntry 6 }

-- ==================================================================
-- h3cDot11RoamStatisGroup Definition
-- ==================================================================
h3cDot11IntraACRoamingSuccCnt OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the count of client successfully roam Intra-AC."
    ::= { h3cDot11RoamStatisGroup 1 }

h3cDot11InterACRoamingSuccCnt OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the count of client successfully roam in Inter-AC."
    ::= { h3cDot11RoamStatisGroup 2 }

h3cDot11InterACRoamOutSuccCnt OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the count of client successfully roam out Inter-AC."
    ::= { h3cDot11RoamStatisGroup 3 }

-- ==================================================================
-- End of h3cDot11RoamStatisGroup Definition
-- ==================================================================

-- ==================================================================
-- h3cDot11RoamStatis2Group Definition
-- ==================================================================
h3cDot11IntraACRoamingSuccCnt2 OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the count of client successfully roam Intra-AC in Counter32."
    ::= { h3cDot11RoamStatis2Group 1 }

h3cDot11InterACRoamingSuccCnt2 OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the count of client successfully roam in Inter-AC in Counter32."
    ::= { h3cDot11RoamStatis2Group 2 }

h3cDot11InterACRoamOutSuccCnt2 OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the count of client successfully roam out Inter-AC in Counter32."
    ::= { h3cDot11RoamStatis2Group 3 }

-- ==================================================================
-- End of h3cDot11RoamStatis2Group Definition
-- ==================================================================
END