Skip to content

Latest commit

 

History

History
1024 lines (855 loc) · 100 KB

README.md

File metadata and controls

1024 lines (855 loc) · 100 KB
Raw

Selenium-Grid Helm Chart

This chart enables the creation of a Selenium Grid Server in Kubernetes.

Contents

Introduction

We offer a Helm chart to simplify the deployment of Selenium Grid Docker images to Kubernetes.

Installing the chart

If you want to install the latest master version of Selenium Grid onto your cluster you can do that by using the helm charts repository located at https://www.selenium.dev/docker-selenium.

# Add docker-selenium helm repository
helm repo add docker-selenium https://www.selenium.dev/docker-selenium

# Update charts from docker-selenium repo
helm repo update

# List all versions present in the docker-selenium repo
helm search repo docker-selenium --versions

# Install basic grid latest version
helm install selenium-grid docker-selenium/selenium-grid

# Or install full grid (Router, Distributor, EventBus, SessionMap and SessionQueue components separated)
helm install selenium-grid docker-selenium/selenium-grid --set isolateComponents=true

# Or install specified version
helm install selenium-grid docker-selenium/selenium-grid --version <version>

# In both cases grid exposed by default using ingress. You may want to set hostname for the grid. Default hostname is selenium-grid.local.
helm install selenium-grid --set ingress.hostname=selenium-grid.k8s.local docker-selenium/chart/selenium-grid/.
# Verify ingress configuration via kubectl get ingress

# Notes: In case you want to set hostname is selenium-grid.local. You need to add the IP and hostname to the local host file in `/etc/hosts`
sudo -- sh -c -e "echo \"$(hostname -i) selenium-grid.local\" >> /etc/hosts"

Installing the Nightly chart

Nightly chart is built from the latest main branch of this repository with using Nightly images. It is not recommended to use this chart in production. It is only for testing purpose. The procedure to install the Nightly chart is the same as the above, only different on the version, it is 1.0.0-nightly

# List all versions Nightly in the docker-selenium repo
helm search repo docker-selenium --devel

# Install basic grid Nightly version
helm install selenium-grid docker-selenium/selenium-grid --version 1.0.0-nightly

Chart Release Name convention

By default, all objects created by the chart will be prefixed with the release name. This is to avoid conflicts with other installations of the chart in the same namespace.

  • If you want to disable this behavior, you can deploy the chart with the release name is selenium.

  • You can override the component name via .nameOverride in a respective component. For example

    hub:
  nameOverride: my-hub-name
chromeNode:
  nameOverride: my-chrome-name

Enable Selenium Grid Autoscaling

Selenium Grid has the ability to autoscaling browser nodes up/down based on the pending requests in the session queue.

To do this KEDA is used. When enabling autoscaling using autoscaling.enabling KEDA is installed automatically. To instead use an existing installation of KEDA you can enable autoscaling with autoscaling.enableWithExistingKEDA instead.

KEDA can scale either with deployments or jobs and the charts support both types. This chart support both modes. It is controlled with autoscaling.scalingType that can be set to either job (default) or deployment.

Settings common for both job and deployment scalingType

There are few settings that are common for both scaling types. These are grouped under autoscaling.scaledOptions.

In case individual node should be scaled differently, you can override the upstream settings with .scaledOptions for each node type. For example:

autoscaling:
  scaledOptions:
    minReplicaCount: 0
    maxReplicaCount: 8
    pollingInterval: 20

chromeNode:
  scaledOptions:
    minReplicaCount: 1
    maxReplicaCount: 16
    pollingInterval: 10

Settings when scalingType with deployment

By default, autoscaling.terminationGracePeriodSeconds is set to 3600 seconds. This is used when scalingType is set to deployment. You can adjust this value, it will affect to all nodes.

In case individual node which needs to set different period, you can override the upstream settings with .terminationGracePeriodSeconds for each node type. Note that override value must be greater than upstream setting to take effect. For example:

autoscaling:
  terminationGracePeriodSeconds: 3600 #default
chromeNode:
  terminationGracePeriodSeconds: 7200 #override
firefoxNode:
  terminationGracePeriodSeconds: 1800 #not override

When scaling using deployments the HPA choose pods to terminate randomly. If the chosen pod is currently executing a test rather than being idle, then there is terminationGracePeriodSeconds seconds before the test is expected to complete. If your test is still executing after terminationGracePeriodSeconds seconds, it would result in failure as the pod will be killed.

During terminationGracePeriodSeconds period, there is preStop hook to execute command to wait for the pod can be shut down gracefully which can be defined in .deregisterLifecycle

  • There is a _helpers template with name seleniumGrid.node.deregisterLifecycle render value for pod lifecycle.preStop. By default, hook to execute the script to drain node and wait for current session to complete if any. The script is stored in node ConfigMap, more details can be seen in config nodeConfigMap.
  • You can define your custom preStop hook which is applied for all nodes via autoscaling.deregisterLifecycle
  • In case individual node which needs different hook, you can override the upstream settings with .deregisterLifecycle for each node type. If you want to disable upstream hook in a node, pass the value as false
  • If an individual node has settings .lifecycle itself, it would take the highest precedence to override the above use cases.
autoscaling:
  deregisterLifecycle:
    preStop:
      exec:
        command: ["bash", "-c", "echo 'Your custom preStop hook applied for all nodes'"]
chromeNode:
  deregisterLifecycle: false #disable upstream hook in chrome node
firefoxNode:
  deregisterLifecycle:
    preStop:
      exec:
        command: ["bash", "-c", "echo 'Your custom preStop hook specific for firefox node'"]
edgeNode:
  lifecycle:
    preStop:
      exec:
        command: ["bash", "-c", "echo 'preStop hook is defined in edge node lifecycle itself'"]

For other settings that KEDA ScaledObject spec supports, you can set them via autoscaling.scaledObjectOptions. For example:

autoscaling:
  scaledObjectOptions:
    cooldownPeriod: 60

Settings when scalingType with job

Settings that KEDA ScaledJob spec supports can be set via autoscaling.scaledJobOptions.

Settings fixed-sized thread pool for the Distributor to create new sessions

When enabling autoscaling, the Distributor might be under a high workload with parallelism tests, which are many requests incoming and nodes scaling up simultaneously. (Refer to: SeleniumHQ/selenium#13723).

By default, the Distributor uses a fixed-sized thread pool with default value is no. of available processors * 3.

In autoscaling, by default, it will calculate based on no. of node types * maxReplicaCount. For example: autoscaling.scaledOptions.maxReplicaCount=50, 3 node types (Chrome, Firefox, Edge enabled), the value is 50 * 3 + 1 = 151 is set to environment variable SE_NEW_SESSION_THREAD_POOL_SIZE to adjust the Distributor config --newsession-threadpool-size

You can override the default calculation by another value via components.distributor.newSessionThreadPoolSize (in full distributed mode) or hub.newSessionThreadPoolSize (in basic mode).

Updating Selenium-Grid release

Once you have a new chart version, you can update your selenium-grid running:

helm upgrade selenium-grid docker-selenium/selenium-grid

If needed, you can add sidecars for your browser nodes by running:

helm upgrade selenium-grid docker-selenium/selenium-grid --set 'firefoxNode.enabled=true' --set-json 'firefoxNode.sidecars=[{"name":"my-sidecar","image":"my-sidecar:latest","imagePullPolicy":"IfNotPresent","ports":[{"containerPort":8080, "protocol":"TCP"}],"resources":{"limits":{"memory": "128Mi"},"requests":{"cpu": "100m"}}}]'

Note: the parameter used for --set-json is just an example, please refer to Container Spec for an overview of usable parameters.

Uninstalling Selenium Grid release

To uninstall:

helm uninstall selenium-grid

Ingress Configuration

By default, ingress is enabled without annotations set. If NGINX ingress controller is used, you need to set few annotations to override the default timeout values to avoid 504 errors (see #1808). Since in Selenium Grid the default of SE_NODE_SESSION_TIMEOUT and SE_SESSION_REQUEST_TIMEOUT is 300 seconds.

To make the user experience better, there are few annotations will be set by default if NGINX ingress controller is used. Mostly relates to timeouts and buffer sizes.

If you are not using NGINX ingress controller, you can disable these default annotations by setting ingress.nginx to nil (aka null) via Helm CLI --set ingress.nginx=!) or via an override-values.yaml as below:

ingress:
  nginx: !

Similarly, if you want to disable a sub-config of ingress.nginx. For example: --set ingress.nginx.proxyBuffer=null)

You are also able to combine using both default annotations and your own annotations in ingress.annotations. Duplicated keys will be merged strategy overwrite with your own annotations in ingress.annotations take precedence.

ingress:
  nginx:
    proxyTimeout: 3600
  annotations:
    nginx.ingress.kubernetes.io/proxy-connect-timeout: "7200" # This key will take 7200 instead of 3600

List mapping of chart values and default annotation(s)

# `ingress.nginx.proxyTimeout` pass value to annotation(s)
nginx.ingress.kubernetes.io/proxy-connect-timeout
nginx.ingress.kubernetes.io/proxy-send-timeout
nginx.ingress.kubernetes.io/proxy-read-timeout
nginx.ingress.kubernetes.io/proxy-next-upstream-timeout
nginx.ingress.kubernetes.io/auth-keepalive-timeout

# `ingress.nginx.proxyBuffer` pass value to to annotation(s)
nginx.ingress.kubernetes.io/proxy-request-buffering: "on"
nginx.ingress.kubernetes.io/proxy-buffering: "on"

# `ingress.nginx.proxyBuffer.size` pass value to to annotation(s)
nginx.ingress.kubernetes.io/proxy-buffer-size
nginx.ingress.kubernetes.io/client-body-buffer-size

# `ingress.nginx.proxyBuffer.number` pass value to annotation(s)
nginx.ingress.kubernetes.io/proxy-buffers-number

You can generate a test double self-signed certificate specify for your hostname, assign it to spec ingress.tls and NGINX ingress controller default certificate (if it is enabled inline). For example:

tls:
  ingress:
    generateTLS: true

ingress:
  hostname: "your.domain.com"

ingress-nginx:
  enabled: true
  controller:
    extraArgs:
      default-ssl-certificate: '$(POD_NAMESPACE)/selenium-tls-secret'

Configuration

Configuration global

For now, global configuration supported is:

Parameter Default Description
global.K8S_PUBLIC_IP "" Public IP of the host running K8s
global.seleniumGrid.imageRegistry selenium Distribution registry to pull images
global.seleniumGrid.imageTag 4.20.0-20240425 Image tag for all selenium components
global.seleniumGrid.nodesImageTag 4.20.0-20240425 Image tag for browser's nodes
global.seleniumGrid.videoImageTag ffmpeg-7.0-20240425 Image tag for browser's video recorder
global.seleniumGrid.imagePullSecret "" Pull secret to be used for all images
global.seleniumGrid.imagePullSecret "" Pull secret to be used for all images
global.seleniumGrid.affinity {} Affinity assigned globally
global.seleniumGrid.logLevel INFO Set log level for all components
global.seleniumGrid.defaultNodeStartupProbe exec Default startup probe method in Nodes
global.seleniumGrid.defaultNodeLivenessProbe exec Default liveness probe method in Nodes
global.seleniumGrid.stdoutProbeLog true Enable probe logs output in kubectl logs

Configuration global.K8S_PUBLIC_IP

This is the public IP of the host running Kubernetes cluster. Mainly, it is used to construct the URL for the Selenium Grid (Hub or Router) can be accessed from the outside of the cluster for Node register, Grid UI, RemoteWebDriver, etc.

  • Ingress is enabled without setting ingress.hostname. All the services will be exposed via the public IP is set in K8S_PUBLIC_IP.
  • Using NodePort to expose the services. All the services will be exposed via the public IP is set in K8S_PUBLIC_IP.
  • Using LoadBalancer to expose the services. All the services will be exposed via the LB External IP is set in K8S_PUBLIC_IP.

For example:

global:
  K8S_PUBLIC_IP: "10.10.10.10"
ingress:
    enabled: true
    hostname: ""
hub:
    subPath: "/selenium"
    serviceType: NodePort
# Source: selenium-grid/templates/node-configmap.yaml

SE_NODE_GRID_URL: 'http://admin:admin@10.10.10.10/selenium'

Besides that, from the outside of the cluster, you can access via NodePort http://10.10.10.10:30444/selenium

Configuration of Nodes

Container ports and Service ports

By default, Node will use port 5555 to listen on container (following this) and expose via Service. You can update this value via .port in respective node type. This will be used to set SE_NODE_PORT environment variable to pass to option --port when starting the node and update in Service accordingly.

By default, if httpGet probes are enabled, it will use .port value in respective node type unless you override it via e.g. .startupProbe.port .readinessProbe.port or .livenessProbe.port in respective node type.

In a node container, there are other running services can be exposed. For example: VNC, NoVNC, SSH, etc. You can easily expose them on container via .ports and on Service service.ports in respective node type.

chromeNode:
  port: 6666 # Update `SE_NODE_PORT` to 6666
  nodePort: 30666 # Specify a NodePort to expose `SE_NODE_PORT` to outside traffic
  ports:
    - 5900 # You can give port number alone, default protocol is TCP
    - 7900
  service:
    type: NodePort # Expose entire ports on Service via NodePort
    ports:
      - name: vnc-port
        protocol: TCP
        port: 5900
        targetPort: 5900
        nodePort: 30590 # Specify a NodePort to expose VNC port
      - name: novnc-port
        protocol: TCP
        port: 7900
        targetPort: 7900
        # NodePort will be assigned randomly if not set
edgeNode:
  ports: # You also can give objects following manifest of container ports
    - containerPort: 5900
      name: vnc
      protocol: TCP
    - containerPort: 7900
      name: novnc
      protocol: TCP

Probes

By default, startupProbe is enabled and readinessProbe and livenessProbe are disabled. You can enable/disable them via .startupProbe.enabled .readinessProbe.enabled .livenessProbe.enabled in respective node type.

By default, probes are using httpGet method to check the node state. It will use .port value in respective node type unless you override it via e.g. .startupProbe.port .readinessProbe.port or .livenessProbe.port in respective node type.

Other settings of probe support to override under .startupProbe .readinessProbe .livenessProbe in respective node type.

    schema
    path
    port
    initialDelaySeconds
    failureThreshold
    timeoutSeconds
    periodSeconds
    successThreshold

You can configure the probes (as Kubernetes supports) to override the default settings. For example:

edgeNode:
  port: 5555
  startupProbe:
    enabled: true
    tcpSocket:
      port: 5555
    failureThreshold: 10
    periodSeconds: 5

Configuration extra scripts mount to container

This is supported for containers of browser node, video recorder and video uploader. By default, in these containers, there are scripts, config files implemented. In case you want to customize or replace them with your own implementation. Instead of forking the chart, use volume mount. Now, from your external files, you can insert them into ConfigMap via Helm CLI --set-file or compose them in your own YAML values file and pass to Helm CLI --values when deploying chart. Any files name that you defined will be picked up into ConfigMap and mounted to the container.

nodeConfigMap:
  extraScriptsDirectory: "/opt/selenium"
  extraScripts:
    nodePreStop.sh: |
      #!/bin/bash
      echo "Your custom script"

recorderConfigMap:
  extraScriptsDirectory: "/opt/bin"
  extraScripts:
    video.sh: |
        #!/bin/bash
        echo "Your custom script"    
    video_graphQLQuery.sh: |
        #!/bin/bash
        echo "My new script"

uploaderConfigMap:
  extraScriptsDirectory: "/opt/bin"
  extraScripts:
    upload.sh: |
        #!/bin/bash
        echo "Your custom entry point"
  secretFiles:
    upload.conf: |
        [myremote]
        type = s3

Via Helm CLI, you can pass your own files to particular config key. Note that, the file name contains dot . for file extension, it will impact to the key name convention in Helm CLI. In this case, be careful to escape the dot . in the file name. For example a command in Unix:

helm upgrade -i test \
    --set-file 'nodeConfigMap.extraScripts.nodePreStop\.sh=/path/to/myScript.sh' \
    --set-file 'recorderConfigMap.extraScripts.video\.sh=/path/to/myCustom.sh' \
    selenium-grid

Files in .extraScripts will be mounted to the container with the same name within directory is defined in .extraScriptsDirectory. For example, in the above config, nodePreStop.sh will be mounted to /opt/selenium/nodePreStop.sh in the node container.

Configuration of video recorder and video uploader

Video recorder

The video recorder is a sidecar deployed with the browser nodes. It is responsible for recording the video of the browser session. The video recorder is disabled by default. To enable it, you need to set the following values:

videoRecorder:
  enabled: true

At chart deployment level, that config will enable video container always. In addition, you can disable video recording process via session capability se:recordVideo. For example in Python binding:

from selenium.webdriver.chrome.options import Options as ChromeOptions
from selenium import webdriver

options = ChromeOptions()
options.set_capability('se:recordVideo', False)
driver = webdriver.Remote(options=options, command_executor="http://localhost:4444")

In Node will perform query GraphQL in Hub based on Node SessionId and extract the value of se:recordVideo in capabilities before deciding to start video recording process or not. You can customize by reading on section Configuration extra scripts mount to container.

Video uploader

The uploader is extra utility in the video container. It is responsible for uploading the video to a remote location. The uploader is disabled by default. To enable it, you need to set the following values:

videoRecorder:
  uploader:
    enabled: true

By default, the uploader uses RCLONE to upload the video to a remote location. RCLONE requires a configuration file to define different remote locations. Refer to RCLONE docs for more details. Config file might contain sensitive information such as access key, secret key, etc. hence it is stored in Secret.

The uploader requires destinationPrefix to be set. It is used to instruct the uploader where to upload the video. The format of destinationPrefix is remote-name://bucket-name/path. The remote-name is configured in RCLONE. The bucket-name is the name of the bucket in the remote location. The path is the path to the folder in the bucket.

By default, the config file is empty. You can override the config file via --set-file uploaderConfigMap.secretFiles.upload\.conf=/path/to/your_config.conf or set via YAML values.

For example, to configure an S3 remote hosted on AWS with named mys3 and the bucket name is mybucket, you can set the following values:

uploaderConfigMap:
  secretFiles:
    upload.conf: |
        [mys3]
        type = s3
        provider = AWS
        env_auth = true
        region = ap-southeast-1
        location_constraint = ap-southeast-1
        acl = private
        access_key_id = xxx
        secret_access_key = xxx

videoRecorder:
  uploader:
    destinationPrefix: "mys3://mybucket/subFolder"

You can prepare a config file with multiple remotes are defined. Ensure that [remoteName] is unique for each remote.

Instead of using config file, another way that RCLONE also supports to pass the information via environment variables. ENV variable with format: RCLONE_CONFIG_ + name of remote + _ + name of config file option (make it all uppercase). In this case the remote name it can only contain letters, digits, or the _ (underscore) character. All those ENV variables can be set via videoRecorder.uploader.secrets, it will be stored in Secret.

For example, the same above config can be set via ENV vars as below:

videoRecorder:
  uploader:
    destinationPrefix: "mys3://mybucket"
    secrets:
      RCLONE_CONFIG_MYS3_TYPE: "s3"
      RCLONE_CONFIG_MYS3_PROVIDER: "GCS"
      RCLONE_CONFIG_MYS3_ENV_AUTH: "true"
      RCLONE_CONFIG_MYS3_REGION: "asia-southeast1"
      RCLONE_CONFIG_MYS3_LOCATION_CONSTRAINT: "asia-southeast1"
      RCLONE_CONFIG_MYS3_ACL: "private"
      RCLONE_CONFIG_MYS3_ACCESS_KEY_ID: "xxx"
      RCLONE_CONFIG_MYS3_SECRET_ACCESS_KEY: "xxx"
      RCLONE_CONFIG_MYS3_ENDPOINT: "https://storage.googleapis.com"
      RCLONE_CONFIG_MYS3_NO_CHECK_BUCKET: "true"

Those two ways are equivalent. You can choose one of them or combine them. When both config file and ENV vars are set, value in upload.conf will take precedence.

Besides the configuration, the script for entry point of uploader container also needed. You can override the script via --set-file uploaderConfigMap.extraScripts.upload\.sh=/path/to/your_script.sh or set via YAML values. For example:

uploaderConfigMap:
  extraScripts:
    upload.sh: |
        #!/bin/bash
        echo "Your custom entry point"

In case you want to configure another sidecar container for uploader, you can set a name for videoRecorder.uploader.name and create a config key with the same name under videoRecorder with all the settings for your container. Set name of videoRecorder.uploader.entryPointFileName if your container start by a different entry point. For example:

uploaderConfigMap:
    extraScripts:
        upload.sh: |
            #!/bin/bash
            echo "Script control the uploader process"

videoRecorder:
    enabled: true
    uploader:
        enabled: true
        name: "s3"
        entryPointFileName: "upload.sh"
        destinationPrefix: "s3://mybucket"
        secrets:
            AWS_REGION: "ap-southeast-1"
            AWS_ACCESS_KEY_ID: "xxxx"
            AWS_SECRET_ACCESS_KEY: "xxxx"
    s3:
        imageRegistry: public.ecr.aws
        imageName: bitnami/aws-cli
        imageTag: latest

Configuration of Secure Communication (HTTPS)

Selenium Grid supports secure communication between components. Refer to the instructions and options are able to configure the secure communication. Below is the details on how to enable secure communication in Selenium Grid chart.

Secure Communication

In the chart, there is directory certs contains the default certificate, private key (as PKCS8 format), and Java Keystore (JKS) to teach Java about secure connection (since we are using a non-standard CA) for your trial, local testing purpose. You can generate your own self-signed certificate put them in that default directory by using script cert.sh with adjust needed information. The certificate, private key, truststore are mounted to the components via Secret.

There are multiple ways to configure your certificate, private key, truststore to the components. You can choose one of them or combine them.

  • Use the default directory certs. Rename your own files to be same as the default files and replace them. Give --set tls.enabled=true to enable secure communication.

  • Use the default directory certs. Copy your own files to there and adjust the file name under config tls.defaultFile, those will be picked up when installing chart. For example:

    tls:
  enabled: true
  trustStorePassword: "your_truststore_password"
  defaultFile:
    certificate: "certs/your_cert.pem"
    privateKey: "certs/your_private_key.pkcs8"
    trustStore: "certs/your_truststore.jks"

    For some security reasons, you may not able to put private key in your source code or your customization chart package. You can provide files with contents are encoded in Base64 format, just append .base64 to the file name for chart able to know and decode them. For example:

    tls:
  enabled: true
  trustStorePassword: "your_truststore_password"
  defaultFile:
    certificate: "certs/your_cert.pem.base64"
    privateKey: "certs/your_private_key.pkcs8.base64"
    trustStore: "certs/your_truststore.jks.base64"

  • Using Helm CLI --set-file to pass your own file to particular config key. For example:

    helm upgrade -i test selenium-grid \
--set tls.enabled=true \
--set-file tls.certificate=/path/to/your_cert\.pem \
--set-file tls.privateKey=/path/to/your_private_key\.pkcs8 \
--set-file tls.trustStore=/path/to/your_truststore\.jks \
--set-string tls.trustStorePassword=your_truststore_password

If you start NGINX ingress controller inline with Selenium Grid chart, you can configure the default certificate of NGINX ingress controller to use the same certificate as Selenium Grid. For example:

tls:
  enabled: true

ingress-nginx:
  enabled: true
  controller:
    extraArgs:
      default-ssl-certificate: '$(POD_NAMESPACE)/selenium-tls-secret'

Node Registration

To enable secure in the node registration to make sure that the node is one you control and not a rouge node, you can enable and provide a registration secret string to Distributor, Router and Node servers in config tls.registrationSecret. For example:

tls:
  enabled: true
  registrationSecret:
    enabled: true
    value: "matchThisSecret"

Configuration of tracing observability

The chart supports tracing observability via Jaeger. To enable it, you need to set the following values:

tracing:
  enabled: true

With this configuration, by default, Jaeger (all-in-one) will be deployed in the same namespace as Selenium Grid. The Jaeger UI can be accessed via same ingress with prefix /jaeger, for example: http://your.host.name/jaeger. The traces will be collected from all the components of Selenium Grid and can be viewed in the Jaeger UI.

In case you want to use your own existing Jaeger instance, you can set the following values:

tracing:
    enabledWithExistingEndpoint: true
    exporter: otlp
    exporterEndpoint: 'http://jaeger.domain.com:4317'

Configuration of Selenium Grid chart

This table contains the configuration parameters of the chart and their default values:

Parameter Default Description
basicAuth.enabled true Enable or disable basic auth for Selenium Grid
basicAuth.username admin Username of basic auth for Selenium Grid
basicAuth.password admin Password of basic auth for Selenium Grid
isolateComponents false Deploy Router, Distributor, EventBus, SessionMap and Nodes separately
serviceAccount.create true Enable or disable creation of service account (if false, serviceAccount.nameOverride MUST be specified
serviceAccount.nameOverride "" Name of another service account to be made or existing service account to use for all deployments and jobs
serviceAccount.annotations {} Custom annotations for service account
busConfigMap.nameOverride `` Override another configmap that contains SE_EVENT_BUS_HOST, SE_EVENT_BUS_PUBLISH_PORT and SE_EVENT_BUS_SUBSCRIBE_PORT vars
busConfigMap.annotations {} Custom annotations for configmap
nodeConfigMap.nameOverride `` Name of the configmap that contains common environment variables for browser nodes
nodeConfigMap.annotations {} Custom annotations for configmap
ingress.enabled true Enable or disable ingress resource
ingress.className "" Name of ingress class to select which controller will implement ingress resource
ingress.annotations {} Custom annotations for ingress resource
ingress.nginx.proxyTimeout 3600 Value is used to set for NGINX ingress annotations related to proxy timeout
ingress.nginx.proxyBuffer.size 512M Value is used to set for NGINX ingress annotations on size of the buffer proxy_buffer_size used for reading
ingress.nginx.proxyBuffer.number 4 Value is used to set for NGINX ingress annotations on number of the buffers in proxy_buffers used for reading
ingress.ports.http 80 Port to expose for HTTP
ingress.ports.https 443 Port to expose for HTTPS
ingress.hostname `` Default host for the ingress resource
ingress.path / Default host path for the ingress resource
ingress.pathType Prefix Default path type for the ingress resource
ingress.paths [] List of paths config for the ingress resource. This will override the default path
ingress.tls [] TLS backend configuration for ingress resource
autoscaling.enableWithExistingKEDA false Enable autoscaling of browser nodes.
autoscaling.enabled false Same as above plus installation of KEDA
autoscaling.scalingType job Which typ of KEDA scaling to use: job or deployment
autoscaling.scaledOptions See values.yaml Common options for KEDA scaled resources (both ScaledJobs and ScaledObjects)
autoscaling.scaledOptions.minReplicaCount 0 Min number of replicas that each browser nodes has when autoscaling
autoscaling.scaledOptions.maxReplicaCount 8 Max number of replicas that each browser nodes can auto scale up to
autoscaling.scaledOptions.pollingInterval 10 The interval to check each trigger on
autoscaling.scaledJobOptions See values.yaml Options for KEDA ScaledJobs (when scalingType is set to job)
autoscaling.scaledObjectOptions See values.yaml Options for KEDA ScaledObjects (when scalingType is set to deployment)
autoscaling.deregisterLifecycle See values.yaml Lifecycle applied to pods of deployments controlled by KEDA. Makes the node deregister from selenium hub
chromeNode.enabled true Enable chrome nodes
chromeNode.deploymentEnabled true Enable creation of Deployment for chrome nodes
chromeNode.replicas 1 Number of chrome nodes. Disabled if autoscaling is enabled.
chromeNode.imageRegistry nil Distribution registry to pull the image (this overwrites .global.seleniumGrid.imageRegistry value)
chromeNode.imageName node-chrome Image of chrome nodes
chromeNode.imageTag 4.20.0-20240425 Image of chrome nodes
chromeNode.imagePullPolicy IfNotPresent Image pull policy (see https://kubernetes.io/docs/concepts/containers/images/#updating-images)
chromeNode.imagePullSecret "" Image pull secret (see https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry)
chromeNode.ports [] Extra ports list to enable on container (e.g VNC, NoVNC, SSH if any)
chromeNode.port 5555 Port is used to set SE_NODE_PORT
chromeNode.nodePort nil NodePort where chrome-node exposed
chromeNode.annotations {} Annotations for chrome-node pods
chromeNode.labels {} Labels for chrome-node pods
chromeNode.resources See values.yaml Resources for chrome-node pods
chromeNode.securityContext See values.yaml Security context for chrome-node pods
chromeNode.tolerations [] Tolerations for chrome-node pods
chromeNode.nodeSelector {} Node Selector for chrome-node pods
chromeNode.affinity {} Affinity for chrome-node pods
chromeNode.hostAliases nil Custom host aliases for chrome nodes
chromeNode.priorityClassName "" Priority class name for chrome-node pods
chromeNode.extraEnvironmentVariables nil Custom environment variables for chrome nodes
chromeNode.extraEnvFrom nil Custom environment taken from configMap or secret variables for chrome nodes
chromeNode.service.enabled true Create a service for node
chromeNode.service.type ClusterIP Service type
chromeNode.service.loadBalancerIP `` Set specific loadBalancerIP when serviceType is LoadBalancer
chromeNode.service.ports [] Extra ports exposed in node service
chromeNode.service.annotations {} Custom annotations for service
chromeNode.dshmVolumeSizeLimit 1Gi Size limit for DSH volume mounted in container (if not set, default is "1Gi")
chromeNode.startupProbe.enabled true Enable Probe to check pod is started successfully (the following configs see values.yaml)
chromeNode.readinessProbe.enabled false Enable Readiness probe settings (the following configs see values.yaml)
chromeNode.livenessProbe.enabled false Enable Liveness probe settings (the following configs see values.yaml)
chromeNode.terminationGracePeriodSeconds 30 Time to graceful terminate container (default: 30s)
chromeNode.lifecycle {} hooks to make pod correctly shutdown or started
chromeNode.extraVolumeMounts [] Extra mounts of declared ExtraVolumes into pod
chromeNode.extraVolumes [] Extra Volumes declarations to be used in the pod (can be any supported volume type: ConfigMap, Secret, PVC, NFS, etc.)
chromeNode.hpa.url {{ include "seleniumGrid.graphqlURL" . }} Graphql Url of the hub or the router
chromeNode.hpa.browserName chrome BrowserName from the capability
chromeNode.hpa.browserVersion `` BrowserVersion from the capability
chromeNode.sidecars [] Add a sidecars proxy in the same pod of the browser node
chromeNode.initContainers [] Add initContainers in the same pod of the browser node
chromeNode.scaledOptions See values.yaml Override the global autoscaling.scaledOptions with specific scaled options for chrome nodes
chromeNode.scaledJobOptions See values.yaml Override the global autoscaling.scaledJobOptions with specific scaled options for chrome nodes
chromeNode.scaledObjectOptions See values.yaml Override the global autoscaling.scaledObjectOptions with specific scaled options for chrome nodes
firefoxNode.enabled true Enable firefox nodes
firefoxNode.deploymentEnabled true Enable creation of Deployment for firefox nodes
firefoxNode.replicas 1 Number of firefox nodes. Disabled if autoscaling is enabled.
firefoxNode.imageRegistry nil Distribution registry to pull the image (this overwrites .global.seleniumGrid.imageRegistry value)
firefoxNode.imageName node-firefox Image of firefox nodes
firefoxNode.imageTag 4.20.0-20240425 Image of firefox nodes
firefoxNode.imagePullPolicy IfNotPresent Image pull policy (see https://kubernetes.io/docs/concepts/containers/images/#updating-images)
firefoxNode.imagePullSecret "" Image pull secret (see https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry)
firefoxNode.ports [] Extra ports list to enable on container (e.g VNC, NoVNC, SSH if any)
firefoxNode.port 5555 Port is used to set SE_NODE_PORT
firefoxNode.nodePort nil NodePort where firefox-node exposed
firefoxNode.annotations {} Annotations for firefox-node pods
firefoxNode.labels {} Labels for firefox-node pods
firefoxNode.resources See values.yaml Resources for firefox-node pods
firefoxNode.securityContext See values.yaml Security context for firefox-node pods
firefoxNode.tolerations [] Tolerations for firefox-node pods
firefoxNode.nodeSelector {} Node Selector for firefox-node pods
firefoxNode.affinity {} Affinity for firefox-node pods
firefoxNode.hostAliases nil Custom host aliases for firefox nodes
firefoxNode.priorityClassName "" Priority class name for firefox-node pods
firefoxNode.extraEnvironmentVariables nil Custom environment variables for firefox nodes
firefoxNode.extraEnvFrom nil Custom environment variables taken from configMap or secret for firefox nodes
firefoxNode.service.enabled true Create a service for node
firefoxNode.service.type ClusterIP Service type
firefoxNode.service.loadBalancerIP `` Set specific loadBalancerIP when serviceType is LoadBalancer
firefoxNode.service.ports [] Extra ports exposed in node service
firefoxNode.service.annotations {} Custom annotations for service
firefoxNode.dshmVolumeSizeLimit 1Gi Size limit for DSH volume mounted in container (if not set, default is "1Gi")
firefoxNode.startupProbe.enabled true Enable Probe to check pod is started successfully (the following configs see values.yaml)
firefoxNode.readinessProbe.enabled false Enable Readiness probe settings (the following configs see values.yaml)
firefoxNode.livenessProbe.enabled false Enable Liveness probe settings (the following configs see values.yaml)
firefoxNode.terminationGracePeriodSeconds 30 Time to graceful terminate container (default: 30s)
firefoxNode.lifecycle {} hooks to make pod correctly shutdown or started
firefoxNode.extraVolumeMounts [] Extra mounts of declared ExtraVolumes into pod
firefoxNode.extraVolumes [] Extra Volumes declarations to be used in the pod (can be any supported volume type: ConfigMap, Secret, PVC, NFS, etc.)
firefoxNode.hpa.url {{ include "seleniumGrid.graphqlURL" . }} Graphql Url of the hub or the router
firefoxNode.hpa.browserName firefox BrowserName from the capability
firefoxNode.hpa.browserVersion `` BrowserVersion from the capability
firefoxNode.sidecars [] Add a sidecars proxy in the same pod of the browser node
firefoxNode.initContainers [] Add initContainers in the same pod of the browser node
firefoxNode.scaledOptions See values.yaml Override the global autoscaling.scaledOptions with specific scaled options for firefox nodes
firefoxNode.scaledJobOptions See values.yaml Override the global autoscaling.scaledJobOptions with specific scaled options for firefox nodes
firefoxNode.scaledObjectOptions See values.yaml Override the global autoscaling.scaledObjectOptions with specific scaled options for firefox nodes
edgeNode.enabled true Enable edge nodes
edgeNode.deploymentEnabled true Enable creation of Deployment for edge nodes
edgeNode.replicas 1 Number of edge nodes. Disabled if autoscaling is enabled.
edgeNode.imageRegistry nil Distribution registry to pull the image (this overwrites .global.seleniumGrid.imageRegistry value)
edgeNode.imageName node-edge Image of edge nodes
edgeNode.imageTag 4.20.0-20240425 Image of edge nodes
edgeNode.imagePullPolicy IfNotPresent Image pull policy (see https://kubernetes.io/docs/concepts/containers/images/#updating-images)
edgeNode.imagePullSecret "" Image pull secret (see https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry)
edgeNode.ports [] Extra ports list to enable on container (e.g VNC, NoVNC, SSH if any)
edgeNode.port 5555 Port is used to set SE_NODE_PORT
edgeNode.nodePort nil NodePort where edge-node exposed
edgeNode.annotations {} Annotations for edge-node pods
edgeNode.labels {} Labels for edge-node pods
edgeNode.resources See values.yaml Resources for edge-node pods
edgeNode.securityContext See values.yaml Security context for edge-node pods
edgeNode.tolerations [] Tolerations for edge-node pods
edgeNode.nodeSelector {} Node Selector for edge-node pods
edgeNode.affinity {} Affinity for edge-node pods
edgeNode.hostAliases nil Custom host aliases for edge nodes
edgeNode.priorityClassName "" Priority class name for edge-node pods
edgeNode.extraEnvironmentVariables nil Custom environment variables for firefox nodes
edgeNode.extraEnvFrom nil Custom environment taken from configMap or secret variables for firefox nodes
edgeNode.service.enabled true Create a service for node
edgeNode.service.type ClusterIP Service type
edgeNode.service.loadBalancerIP `` Set specific loadBalancerIP when serviceType is LoadBalancer
edgeNode.service.ports [] Extra ports exposed in node service
edgeNode.service.annotations {} Custom annotations for service
edgeNode.dshmVolumeSizeLimit 1Gi Size limit for DSH volume mounted in container (if not set, default is "1Gi")
edgeNode.startupProbe.enabled true Enable Probe to check pod is started successfully (the following configs see values.yaml)
edgeNode.readinessProbe.enabled false Enable Readiness probe settings (the following configs see values.yaml)
edgeNode.livenessProbe.enabled false Enable Liveness probe settings (the following configs see values.yaml)
edgeNode.terminationGracePeriodSeconds 30 Time to graceful terminate container (default: 30s)
edgeNode.lifecycle {} hooks to make pod correctly shutdown or started
edgeNode.extraVolumeMounts [] Extra mounts of declared ExtraVolumes into pod
edgeNode.extraVolumes [] Extra Volumes declarations to be used in the pod (can be any supported volume type: ConfigMap, Secret, PVC, NFS, etc.)
edgeNode.hpa.url {{ include "seleniumGrid.graphqlURL" . }} Graphql Url of the hub or the router
edgeNode.hpa.browserName edge BrowserName from the capability
edgeNode.hpa.browserVersion `` BrowserVersion from the capability
edgeNode.sidecars [] Add a sidecars proxy in the same pod of the browser node
edgeNode.initContainers [] Add initContainers in the same pod of the browser node
edgeNode.scaledOptions See values.yaml Override the global autoscaling.scaledOptions with specific scaled options for edge nodes
edgeNode.scaledJobOptions See values.yaml Override the global autoscaling.scaledJobOptions with specific scaled options for edge nodes
edgeNode.scaledObjectOptions See values.yaml Override the global autoscaling.scaledObjectOptions with specific scaled options for edge nodes
videoRecorder.enabled false Enable video recorder for node
videoRecorder.imageRegistry nil Distribution registry to pull the image (this overwrites .global.seleniumGrid.imageRegistry value)
videoRecorder.imageName video Selenium video recorder image name
videoRecorder.imageTag ffmpeg-7.0-20240425 Image tag of video recorder
videoRecorder.imagePullPolicy IfNotPresent Image pull policy (see https://kubernetes.io/docs/concepts/containers/images/#updating-images)
videoRecorder.uploader.enabled false Enable the uploader for videos
videoRecorder.uploader.destinationPrefix `` Destination for uploading video file. It is following rclone config
videoRecorder.uploader.name `` Name of the pluggable uploader container to add and configure
videoRecorder.uploader.configFileName config.conf Config file name for rclone in uploader container
videoRecorder.uploader.entryPointFileName entry_point.sh Script file name for uploader container entry point
videoRecorder.uploader.config `` Set value to uploader config file via YAML or --set-file
videoRecorder.uploader.entryPoint `` Set value to uploader entry point via YAML or --set-file
videoRecorder.uploader.secrets `` Environment variables to configure the uploader which store in Secret
videoRecorder.ports [9000] Port list to enable on video recorder container
videoRecorder.resources See values.yaml Resources for video recorder
videoRecorder.extraEnvironmentVariables nil Custom environment variables for video recorder
videoRecorder.extraEnvFrom nil Custom environment taken from configMap or secret variables for video recorder
videoRecorder.terminationGracePeriodSeconds 30 Time to graceful terminate container (default: 30s)
videoRecorder.startupProbe {} Probe to check pod is started successfully
videoRecorder.livenessProbe {} Liveness probe settings
videoRecorder.lifecycle {} Define lifecycle events for video recorder
videoRecorder.extraVolumeMounts [] Extra mounts of declared ExtraVolumes into pod
videoRecorder.extraVolumes [] Extra Volumes declarations to be used in the pod (can be any supported volume type: ConfigMap, Secret, PVC, NFS, etc.)
customLabels {} Custom labels for k8s resources
ingress-nginx.enabled false Enable the dependency chart Ingress controller for Kubernetes (https://github.com/kubernetes/ingress-nginx)

Configuration of KEDA

If you are setting autoscaling.enabled to true, chart KEDA is installed and can be configured with values with the prefix keda. So you can for example set keda.prometheus.metricServer.enabled to true to enable the metrics server for KEDA. See https://github.com/kedacore/charts/blob/main/keda/README.md for more details.

Configuration of Ingress NGINX Controller

If you are setting ingress-nginx.enabled to true, chart Ingress NGINX Controller is installed and can be configured with values with the prefix ingress-nginx. See https://github.com/kubernetes/ingress-nginx for more details.

Configuration of Jaeger

If you are setting tracing.enabled to true, chart Jaeger is installed and can be configured with values with the prefix jaeger. See https://github.com/jaegertracing/helm-charts for more details.

Configuration for Selenium-Hub

You can configure the Selenium Hub with these values:

Parameter Default Description
hub.imageRegistry nil Distribution registry to pull the image (this overwrites .global.seleniumGrid.imageRegistry value)
hub.imageName hub Selenium Hub image name
hub.imageTag nil Selenium Hub image tag (this overwrites .global.seleniumGrid.imageTag value)
hub.imagePullPolicy IfNotPresent Image pull policy (see https://kubernetes.io/docs/concepts/containers/images/#updating-images)
hub.imagePullSecret "" Image pull secret (see https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry)
hub.annotations {} Custom annotations for Selenium Hub pod
hub.labels {} Custom labels for Selenium Hub pod
hub.disableUI false Disable the Grid UI
hub.newSessionThreadPoolSize nil Configure fixed-sized thread pool for the Distributor to create new sessions as it consumes new session requests from the queue
hub.publishPort 4442 Port where events are published
hub.publishNodePort 31442 NodePort where events are published
hub.subscribePort 4443 Port where to subscribe for events
hub.subscribeNodePort 31443 NodePort where to subscribe for events
hub.port 4444 Selenium Hub port
hub.nodePort 31444 Selenium Hub NodePort
hub.livenessProbe See values.yaml Liveness probe settings
hub.readinessProbe See values.yaml Readiness probe settings
hub.tolerations [] Tolerations for selenium-hub pods
hub.nodeSelector {} Node Selector for selenium-hub pods
hub.affinity {} Affinity for selenium-hub pods
hub.priorityClassName "" Priority class name for selenium-hub pods
hub.subPath / Custom sub path for the hub deployment
hub.extraEnvironmentVariables nil Custom environment variables for selenium-hub
hub.extraEnvFrom nil Custom environment variables for selenium taken from configMap or secret-hub
hub.extraVolumeMounts [] Extra mounts of declared ExtraVolumes into pod
hub.extraVolumes [] Extra Volumes declarations to be used in the pod (can be any supported volume type: ConfigMap, Secret, PVC, NFS, etc.)
hub.resources {} Resources for selenium-hub container
hub.securityContext See values.yaml Security context for selenium-hub container
hub.serviceType ClusterIP Kubernetes service type (see https://kubernetes.io/docs/concepts/services-networking/service/#publishing-services-service-types)
hub.loadBalancerIP nil Set specific loadBalancerIP when serviceType is LoadBalancer (see https://kubernetes.io/docs/concepts/services-networking/service/#loadbalancer)
hub.serviceAnnotations {} Custom annotations for Selenium Hub service

Configuration for isolated components

If you implement selenium-grid with separate components (isolateComponents: true), you can configure all components via the following values:

Parameter Default Description
components.router.imageRegistry nil Distribution registry to pull the image (this overwrites .global.seleniumGrid.imageRegistry value)
components.router.imageName router Router image name
components.router.imageTag nil Router image tag (this overwrites .global.seleniumGrid.imageTag value)
components.router.imagePullPolicy IfNotPresent Image pull policy (see https://kubernetes.io/docs/concepts/containers/images/#updating-images)
components.router.imagePullSecret "" Image pull secret (see https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry)
components.router.annotations {} Custom annotations for router pod
components.router.port 4444 Router port
components.router.nodePort 30444 Router NodePort
components.router.livenessProbe See values.yaml Liveness probe settings
components.router.readinessProbe See values.yaml Readiness probe settings
components.router.resources {} Resources for router pod
components.router.securityContext See values.yaml Security context for router pod
components.router.serviceType ClusterIP Kubernetes service type (see https://kubernetes.io/docs/concepts/services-networking/service/#publishing-services-service-types)
components.router.loadBalancerIP nil Set specific loadBalancerIP when serviceType is LoadBalancer (see https://kubernetes.io/docs/concepts/services-networking/service/#loadbalancer)
components.router.serviceAnnotations {} Custom annotations for router service
components.router.tolerations [] Tolerations for router pods
components.router.nodeSelector {} Node Selector for router pods
components.router.affinity {} Affinity for router pods
components.router.priorityClassName "" Priority class name for router pods
components.router.disableUI false Disable the Grid UI
components.distributor.imageRegistry nil Distribution registry to pull the image (this overwrites .global.seleniumGrid.imageRegistry value)
components.distributor.imageName distributor Distributor image name
components.distributor.imageTag nil Distributor image tag (this overwrites .global.seleniumGrid.imageTag value)
components.distributor.imagePullPolicy IfNotPresent Image pull policy (see https://kubernetes.io/docs/concepts/containers/images/#updating-images)
components.distributor.imagePullSecret "" Image pull secret (see https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry)
components.distributor.annotations {} Custom annotations for Distributor pod
components.distributor.port 5553 Distributor port
components.distributor.nodePort 30553 Distributor NodePort
components.distributor.resources {} Resources for Distributor pod
components.distributor.securityContext See values.yaml Security context for Distributor pod
components.distributor.serviceType ClusterIP Kubernetes service type (see https://kubernetes.io/docs/concepts/services-networking/service/#publishing-services-service-types)
components.distributor.serviceAnnotations {} Custom annotations for Distributor service
components.distributor.tolerations [] Tolerations for Distributor pods
components.distributor.nodeSelector {} Node Selector for Distributor pods
components.distributor.affinity {} Affinity for Distributor pods
components.distributor.priorityClassName "" Priority class name for Distributor pods
components.distributor.newSessionThreadPoolSize nil Configure fixed-sized thread pool for the Distributor to create new sessions as it consumes new session requests from the queue
components.eventBus.imageRegistry nil Distribution registry to pull the image (this overwrites .global.seleniumGrid.imageRegistry value)
components.eventBus.imageName event-bus Event Bus image name
components.eventBus.imageTag nil Event Bus image tag (this overwrites .global.seleniumGrid.imageTag value)
components.eventBus.imagePullPolicy IfNotPresent Image pull policy (see https://kubernetes.io/docs/concepts/containers/images/#updating-images)
components.eventBus.imagePullSecret "" Image pull secret (see https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry)
components.eventBus.annotations {} Custom annotations for Event Bus pod
components.eventBus.port 5557 Event Bus port
components.eventBus.nodePort 30557 Event Bus NodePort
components.eventBus.publishPort 4442 Port where events are published
components.eventBus.publishNodePort 30442 NodePort where events are published
components.eventBus.subscribePort 4443 Port where to subscribe for events
components.eventBus.subscribeNodePort 30443 NodePort where to subscribe for events
components.eventBus.resources {} Resources for event-bus pod
components.eventBus.securityContext See values.yaml Security context for event-bus pod
components.eventBus.serviceType ClusterIP Kubernetes service type (see https://kubernetes.io/docs/concepts/services-networking/service/#publishing-services-service-types)
components.eventBus.serviceAnnotations {} Custom annotations for Event Bus service
components.eventBus.tolerations [] Tolerations for Event Bus pods
components.eventBus.nodeSelector {} Node Selector for Event Bus pods
components.eventBus.affinity {} Affinity for Event Bus pods
components.eventBus.priorityClassName "" Priority class name for Event Bus pods
components.sessionMap.imageRegistry nil Distribution registry to pull the image (this overwrites .global.seleniumGrid.imageRegistry value)
components.sessionMap.imageName sessions Session Map image name
components.sessionMap.imageTag nil Session Map image tag (this overwrites .global.seleniumGrid.imageTag value)
components.sessionMap.imagePullPolicy IfNotPresent Image pull policy (see https://kubernetes.io/docs/concepts/containers/images/#updating-images)
components.sessionMap.imagePullSecret "" Image pull secret (see https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry)
components.sessionMap.annotations {} Custom annotations for Session Map pod
components.sessionMap.resources {} Resources for Session Map pod
components.sessionMap.securityContext See values.yaml Security context for Session Map pod
components.sessionMap.serviceType ClusterIP Kubernetes service type (see https://kubernetes.io/docs/concepts/services-networking/service/#publishing-services-service-types)
components.sessionMap.serviceAnnotations {} Custom annotations for Session Map service
components.sessionMap.tolerations [] Tolerations for Session Map pods
components.sessionMap.nodeSelector {} Node Selector for Session Map pods
components.sessionMap.affinity {} Affinity for Session Map pods
components.sessionMap.priorityClassName "" Priority class name for Session Map pods
components.sessionQueue.imageRegistry nil Distribution registry to pull the image (this overwrites .global.seleniumGrid.imageRegistry value)
components.sessionQueue.imageName session-queue Session Queue image name
components.sessionQueue.imageTag nil Session Queue image tag (this overwrites .global.seleniumGrid.imageTag value)
components.sessionQueue.imagePullPolicy IfNotPresent Image pull policy (see https://kubernetes.io/docs/concepts/containers/images/#updating-images)
components.sessionQueue.imagePullSecret "" Image pull secret (see https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry)
components.sessionQueue.annotations {} Custom annotations for Session Queue pod
components.sessionQueue.port 5559 Session Queue Port
components.sessionQueue.nodePort 30559 Session Queue NodePort
components.sessionQueue.resources {} Resources for Session Queue pod
components.sessionQueue.securityContext See values.yaml Security context for Session Queue pod
components.sessionQueue.serviceType ClusterIP Kubernetes service type (see https://kubernetes.io/docs/concepts/services-networking/service/#publishing-services-service-types)
components.sessionQueue.serviceAnnotations {} Custom annotations for Session Queue service
components.sessionQueue.tolerations [] Tolerations for Session Queue pods
components.sessionQueue.nodeSelector {} Node Selector for Session Queue pods
components.sessionQueue.affinity {} Affinity for Session Queue pods
components.sessionQueue.priorityClassName "" Priority class name for Session Queue pods
components.subPath / Custom sub path for all components
components.extraEnvironmentVariables nil Custom environment variables for all components
components.extraEnvFrom nil Custom environment variables taken from configMap or secret for all components

See how to customize a helm chart installation in the Helm Docs for more information.