test_imagedraw.py

import os.path

import pytest

from PIL import Image, ImageColor, ImageDraw, ImageFont

from .helper import (
    assert_image_equal,
    assert_image_equal_tofile,
    assert_image_similar_tofile,
    hopper,
    skip_unless_feature,
)

BLACK = (0, 0, 0)
WHITE = (255, 255, 255)
GRAY = (190, 190, 190)
DEFAULT_MODE = "RGB"
IMAGES_PATH = os.path.join("Tests", "images", "imagedraw")

# Image size
W, H = 100, 100

# Bounding box points
X0 = int(W / 4)
X1 = int(X0 * 3)
Y0 = int(H / 4)
Y1 = int(X0 * 3)

# Two kinds of bounding box
BBOX1 = [(X0, Y0), (X1, Y1)]
BBOX2 = [X0, Y0, X1, Y1]

# Two kinds of coordinate sequences
POINTS1 = [(10, 10), (20, 40), (30, 30)]
POINTS2 = [10, 10, 20, 40, 30, 30]

KITE_POINTS = [(10, 50), (70, 10), (90, 50), (70, 90), (10, 50)]


def test_sanity():
    im = hopper("RGB").copy()

    draw = ImageDraw.ImageDraw(im)
    draw = ImageDraw.Draw(im)

    draw.ellipse(list(range(4)))
    draw.line(list(range(10)))
    draw.polygon(list(range(100)))
    draw.rectangle(list(range(4)))


def test_valueerror():
    with Image.open("Tests/images/chi.gif") as im:

        draw = ImageDraw.Draw(im)
        draw.line((0, 0), fill=(0, 0, 0))


def test_mode_mismatch():
    im = hopper("RGB").copy()

    with pytest.raises(ValueError):
        ImageDraw.ImageDraw(im, mode="L")


def helper_arc(bbox, start, end):
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)

    # Act
    draw.arc(bbox, start, end)

    # Assert
    assert_image_similar_tofile(im, "Tests/images/imagedraw_arc.png", 1)


def test_arc1():
    helper_arc(BBOX1, 0, 180)
    helper_arc(BBOX1, 0.5, 180.4)


def test_arc2():
    helper_arc(BBOX2, 0, 180)
    helper_arc(BBOX2, 0.5, 180.4)


def test_arc_end_le_start():
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)
    start = 270.5
    end = 0

    # Act
    draw.arc(BBOX1, start=start, end=end)

    # Assert
    assert_image_equal_tofile(im, "Tests/images/imagedraw_arc_end_le_start.png")


def test_arc_no_loops():
    # No need to go in loops
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)
    start = 5
    end = 370

    # Act
    draw.arc(BBOX1, start=start, end=end)

    # Assert
    assert_image_similar_tofile(im, "Tests/images/imagedraw_arc_no_loops.png", 1)


def test_arc_width():
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)

    # Act
    draw.arc(BBOX1, 10, 260, width=5)

    # Assert
    assert_image_similar_tofile(im, "Tests/images/imagedraw_arc_width.png", 1)


def test_arc_width_pieslice_large():
    # Tests an arc with a large enough width that it is a pieslice
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)

    # Act
    draw.arc(BBOX1, 10, 260, fill="yellow", width=100)

    # Assert
    assert_image_similar_tofile(im, "Tests/images/imagedraw_arc_width_pieslice.png", 1)


def test_arc_width_fill():
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)

    # Act
    draw.arc(BBOX1, 10, 260, fill="yellow", width=5)

    # Assert
    assert_image_similar_tofile(im, "Tests/images/imagedraw_arc_width_fill.png", 1)


def test_arc_width_non_whole_angle():
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)
    expected = "Tests/images/imagedraw_arc_width_non_whole_angle.png"

    # Act
    draw.arc(BBOX1, 10, 259.5, width=5)

    # Assert
    assert_image_similar_tofile(im, expected, 1)


def test_arc_high():
    # Arrange
    im = Image.new("RGB", (200, 200))
    draw = ImageDraw.Draw(im)

    # Act
    draw.arc([10, 10, 89, 189], 20, 330, width=20, fill="white")
    draw.arc([110, 10, 189, 189], 20, 150, width=20, fill="white")

    # Assert
    assert_image_equal_tofile(im, "Tests/images/imagedraw_arc_high.png")


def test_bitmap():
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)
    with Image.open("Tests/images/pil123rgba.png") as small:
        small = small.resize((50, 50), Image.NEAREST)

        # Act
        draw.bitmap((10, 10), small)

    # Assert
    assert_image_equal_tofile(im, "Tests/images/imagedraw_bitmap.png")


def helper_chord(mode, bbox, start, end):
    # Arrange
    im = Image.new(mode, (W, H))
    draw = ImageDraw.Draw(im)
    expected = f"Tests/images/imagedraw_chord_{mode}.png"

    # Act
    draw.chord(bbox, start, end, fill="red", outline="yellow")

    # Assert
    assert_image_similar_tofile(im, expected, 1)


def test_chord1():
    for mode in ["RGB", "L"]:
        helper_chord(mode, BBOX1, 0, 180)


def test_chord2():
    for mode in ["RGB", "L"]:
        helper_chord(mode, BBOX2, 0, 180)


def test_chord_width():
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)

    # Act
    draw.chord(BBOX1, 10, 260, outline="yellow", width=5)

    # Assert
    assert_image_similar_tofile(im, "Tests/images/imagedraw_chord_width.png", 1)


def test_chord_width_fill():
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)

    # Act
    draw.chord(BBOX1, 10, 260, fill="red", outline="yellow", width=5)

    # Assert
    assert_image_similar_tofile(im, "Tests/images/imagedraw_chord_width_fill.png", 1)


def test_chord_zero_width():
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)

    # Act
    draw.chord(BBOX1, 10, 260, fill="red", outline="yellow", width=0)

    # Assert
    assert_image_equal_tofile(im, "Tests/images/imagedraw_chord_zero_width.png")


def test_chord_too_fat():
    # Arrange
    im = Image.new("RGB", (100, 100))
    draw = ImageDraw.Draw(im)

    # Act
    draw.chord([-150, -150, 99, 99], 15, 60, width=10, fill="white", outline="red")

    # Assert
    assert_image_equal_tofile(im, "Tests/images/imagedraw_chord_too_fat.png")


def helper_ellipse(mode, bbox):
    # Arrange
    im = Image.new(mode, (W, H))
    draw = ImageDraw.Draw(im)
    expected = f"Tests/images/imagedraw_ellipse_{mode}.png"

    # Act
    draw.ellipse(bbox, fill="green", outline="blue")

    # Assert
    assert_image_similar_tofile(im, expected, 1)


def test_ellipse1():
    for mode in ["RGB", "L"]:
        helper_ellipse(mode, BBOX1)


def test_ellipse2():
    for mode in ["RGB", "L"]:
        helper_ellipse(mode, BBOX2)


def test_ellipse_translucent():
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im, "RGBA")

    # Act
    draw.ellipse(BBOX1, fill=(0, 255, 0, 127))

    # Assert
    expected = "Tests/images/imagedraw_ellipse_translucent.png"
    assert_image_similar_tofile(im, expected, 1)


def test_ellipse_edge():
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)

    # Act
    draw.ellipse(((0, 0), (W - 1, H - 1)), fill="white")

    # Assert
    assert_image_similar_tofile(im, "Tests/images/imagedraw_ellipse_edge.png", 1)


def test_ellipse_symmetric():
    for width, bbox in (
        (100, (24, 24, 75, 75)),
        (101, (25, 25, 75, 75)),
    ):
        im = Image.new("RGB", (width, 100))
        draw = ImageDraw.Draw(im)
        draw.ellipse(bbox, fill="green", outline="blue")
        assert_image_equal(im, im.transpose(Image.FLIP_LEFT_RIGHT))


def test_ellipse_width():
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)

    # Act
    draw.ellipse(BBOX1, outline="blue", width=5)

    # Assert
    assert_image_similar_tofile(im, "Tests/images/imagedraw_ellipse_width.png", 1)


def test_ellipse_width_large():
    # Arrange
    im = Image.new("RGB", (500, 500))
    draw = ImageDraw.Draw(im)

    # Act
    draw.ellipse((25, 25, 475, 475), outline="blue", width=75)

    # Assert
    assert_image_similar_tofile(im, "Tests/images/imagedraw_ellipse_width_large.png", 1)


def test_ellipse_width_fill():
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)

    # Act
    draw.ellipse(BBOX1, fill="green", outline="blue", width=5)

    # Assert
    assert_image_similar_tofile(im, "Tests/images/imagedraw_ellipse_width_fill.png", 1)


def test_ellipse_zero_width():
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)

    # Act
    draw.ellipse(BBOX1, fill="green", outline="blue", width=0)

    # Assert
    assert_image_equal_tofile(im, "Tests/images/imagedraw_ellipse_zero_width.png")


def ellipse_various_sizes_helper(filled):
    ellipse_sizes = range(32)
    image_size = sum(ellipse_sizes) + len(ellipse_sizes) + 1
    im = Image.new("RGB", (image_size, image_size))
    draw = ImageDraw.Draw(im)

    x = 1
    for w in ellipse_sizes:
        y = 1
        for h in ellipse_sizes:
            border = [x, y, x + w - 1, y + h - 1]
            if filled:
                draw.ellipse(border, fill="white")
            else:
                draw.ellipse(border, outline="white")
            y += h + 1
        x += w + 1

    return im


def test_ellipse_various_sizes():
    im = ellipse_various_sizes_helper(False)

    assert_image_equal_tofile(im, "Tests/images/imagedraw_ellipse_various_sizes.png")


def test_ellipse_various_sizes_filled():
    im = ellipse_various_sizes_helper(True)

    assert_image_equal_tofile(
        im, "Tests/images/imagedraw_ellipse_various_sizes_filled.png"
    )


def helper_line(points):
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)

    # Act
    draw.line(points, fill="yellow", width=2)

    # Assert
    assert_image_equal_tofile(im, "Tests/images/imagedraw_line.png")


def test_line1():
    helper_line(POINTS1)


def test_line2():
    helper_line(POINTS2)


def test_shape1():
    # Arrange
    im = Image.new("RGB", (100, 100), "white")
    draw = ImageDraw.Draw(im)
    x0, y0 = 5, 5
    x1, y1 = 5, 50
    x2, y2 = 95, 50
    x3, y3 = 95, 5

    # Act
    s = ImageDraw.Outline()
    s.move(x0, y0)
    s.curve(x1, y1, x2, y2, x3, y3)
    s.line(x0, y0)

    draw.shape(s, fill=1)

    # Assert
    assert_image_equal_tofile(im, "Tests/images/imagedraw_shape1.png")


def test_shape2():
    # Arrange
    im = Image.new("RGB", (100, 100), "white")
    draw = ImageDraw.Draw(im)
    x0, y0 = 95, 95
    x1, y1 = 95, 50
    x2, y2 = 5, 50
    x3, y3 = 5, 95

    # Act
    s = ImageDraw.Outline()
    s.move(x0, y0)
    s.curve(x1, y1, x2, y2, x3, y3)
    s.line(x0, y0)

    draw.shape(s, outline="blue")

    # Assert
    assert_image_equal_tofile(im, "Tests/images/imagedraw_shape2.png")


def helper_pieslice(bbox, start, end):
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)

    # Act
    draw.pieslice(bbox, start, end, fill="white", outline="blue")

    # Assert
    assert_image_similar_tofile(im, "Tests/images/imagedraw_pieslice.png", 1)


def test_pieslice1():
    helper_pieslice(BBOX1, -92, 46)
    helper_pieslice(BBOX1, -92.2, 46.2)


def test_pieslice2():
    helper_pieslice(BBOX2, -92, 46)
    helper_pieslice(BBOX2, -92.2, 46.2)


def test_pieslice_width():
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)

    # Act
    draw.pieslice(BBOX1, 10, 260, outline="blue", width=5)

    # Assert
    assert_image_similar_tofile(im, "Tests/images/imagedraw_pieslice_width.png", 1)


def test_pieslice_width_fill():
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)
    expected = "Tests/images/imagedraw_pieslice_width_fill.png"

    # Act
    draw.pieslice(BBOX1, 10, 260, fill="white", outline="blue", width=5)

    # Assert
    assert_image_similar_tofile(im, expected, 1)


def test_pieslice_zero_width():
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)

    # Act
    draw.pieslice(BBOX1, 10, 260, fill="white", outline="blue", width=0)

    # Assert
    assert_image_equal_tofile(im, "Tests/images/imagedraw_pieslice_zero_width.png")


def test_pieslice_wide():
    # Arrange
    im = Image.new("RGB", (200, 100))
    draw = ImageDraw.Draw(im)

    # Act
    draw.pieslice([0, 0, 199, 99], 190, 170, width=10, fill="white", outline="red")

    # Assert
    assert_image_equal_tofile(im, "Tests/images/imagedraw_pieslice_wide.png")


def helper_point(points):
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)

    # Act
    draw.point(points, fill="yellow")

    # Assert
    assert_image_equal_tofile(im, "Tests/images/imagedraw_point.png")


def test_point1():
    helper_point(POINTS1)


def test_point2():
    helper_point(POINTS2)


def helper_polygon(points):
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)

    # Act
    draw.polygon(points, fill="red", outline="blue")

    # Assert
    assert_image_equal_tofile(im, "Tests/images/imagedraw_polygon.png")


def test_polygon1():
    helper_polygon(POINTS1)


def test_polygon2():
    helper_polygon(POINTS2)


def test_polygon_kite():
    # Test drawing lines of different gradients (dx>dy, dy>dx) and
    # vertical (dx==0) and horizontal (dy==0) lines
    for mode in ["RGB", "L"]:
        # Arrange
        im = Image.new(mode, (W, H))
        draw = ImageDraw.Draw(im)
        expected = f"Tests/images/imagedraw_polygon_kite_{mode}.png"

        # Act
        draw.polygon(KITE_POINTS, fill="blue", outline="yellow")

        # Assert
        assert_image_equal_tofile(im, expected)


def test_polygon_1px_high():
    # Test drawing a 1px high polygon
    # Arrange
    im = Image.new("RGB", (3, 3))
    draw = ImageDraw.Draw(im)
    expected = "Tests/images/imagedraw_polygon_1px_high.png"

    # Act
    draw.polygon([(0, 1), (0, 1), (2, 1), (2, 1)], "#f00")

    # Assert
    assert_image_equal_tofile(im, expected)


def helper_rectangle(bbox):
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)

    # Act
    draw.rectangle(bbox, fill="black", outline="green")

    # Assert
    assert_image_equal_tofile(im, "Tests/images/imagedraw_rectangle.png")


def test_rectangle1():
    helper_rectangle(BBOX1)


def test_rectangle2():
    helper_rectangle(BBOX2)


def test_big_rectangle():
    # Test drawing a rectangle bigger than the image
    # Arrange
    im = Image.new("RGB", (W, H))
    bbox = [(-1, -1), (W + 1, H + 1)]
    draw = ImageDraw.Draw(im)

    # Act
    draw.rectangle(bbox, fill="orange")

    # Assert
    assert_image_similar_tofile(im, "Tests/images/imagedraw_big_rectangle.png", 1)


def test_rectangle_width():
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)
    expected = "Tests/images/imagedraw_rectangle_width.png"

    # Act
    draw.rectangle(BBOX1, outline="green", width=5)

    # Assert
    assert_image_equal_tofile(im, expected)


def test_rectangle_width_fill():
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)
    expected = "Tests/images/imagedraw_rectangle_width_fill.png"

    # Act
    draw.rectangle(BBOX1, fill="blue", outline="green", width=5)

    # Assert
    assert_image_equal_tofile(im, expected)


def test_rectangle_zero_width():
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)

    # Act
    draw.rectangle(BBOX1, fill="blue", outline="green", width=0)

    # Assert
    assert_image_equal_tofile(im, "Tests/images/imagedraw_rectangle_zero_width.png")


def test_rectangle_I16():
    # Arrange
    im = Image.new("I;16", (W, H))
    draw = ImageDraw.Draw(im)

    # Act
    draw.rectangle(BBOX1, fill="black", outline="green")

    # Assert
    assert_image_equal_tofile(im.convert("I"), "Tests/images/imagedraw_rectangle_I.png")


def test_rectangle_translucent_outline():
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im, "RGBA")

    # Act
    draw.rectangle(BBOX1, fill="black", outline=(0, 255, 0, 127), width=5)

    # Assert
    assert_image_equal_tofile(
        im, "Tests/images/imagedraw_rectangle_translucent_outline.png"
    )


@pytest.mark.parametrize(
    "xy",
    [(10, 20, 190, 180), ([10, 20], [190, 180]), ((10, 20), (190, 180))],
)
def test_rounded_rectangle(xy):
    # Arrange
    im = Image.new("RGB", (200, 200))
    draw = ImageDraw.Draw(im)

    # Act
    draw.rounded_rectangle(xy, 30, fill="red", outline="green", width=5)

    # Assert
    assert_image_equal_tofile(im, "Tests/images/imagedraw_rounded_rectangle.png")


def test_rounded_rectangle_zero_radius():
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)

    # Act
    draw.rounded_rectangle(BBOX1, 0, fill="blue", outline="green", width=5)

    # Assert
    assert_image_equal_tofile(im, "Tests/images/imagedraw_rectangle_width_fill.png")


def test_floodfill():
    red = ImageColor.getrgb("red")

    for mode, value in [("L", 1), ("RGBA", (255, 0, 0, 0)), ("RGB", red)]:
        # Arrange
        im = Image.new(mode, (W, H))
        draw = ImageDraw.Draw(im)
        draw.rectangle(BBOX2, outline="yellow", fill="green")
        centre_point = (int(W / 2), int(H / 2))

        # Act
        ImageDraw.floodfill(im, centre_point, value)

        # Assert
        expected = "Tests/images/imagedraw_floodfill_" + mode + ".png"
        with Image.open(expected) as im_floodfill:
            assert_image_equal(im, im_floodfill)

    # Test that using the same colour does not change the image
    ImageDraw.floodfill(im, centre_point, red)
    assert_image_equal(im, im_floodfill)

    # Test that filling outside the image does not change the image
    ImageDraw.floodfill(im, (W, H), red)
    assert_image_equal(im, im_floodfill)

    # Test filling at the edge of an image
    im = Image.new("RGB", (1, 1))
    ImageDraw.floodfill(im, (0, 0), red)
    assert_image_equal(im, Image.new("RGB", (1, 1), red))


def test_floodfill_border():
    # floodfill() is experimental

    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)
    draw.rectangle(BBOX2, outline="yellow", fill="green")
    centre_point = (int(W / 2), int(H / 2))

    # Act
    ImageDraw.floodfill(
        im,
        centre_point,
        ImageColor.getrgb("red"),
        border=ImageColor.getrgb("black"),
    )

    # Assert
    assert_image_equal_tofile(im, "Tests/images/imagedraw_floodfill2.png")


def test_floodfill_thresh():
    # floodfill() is experimental

    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)
    draw.rectangle(BBOX2, outline="darkgreen", fill="green")
    centre_point = (int(W / 2), int(H / 2))

    # Act
    ImageDraw.floodfill(im, centre_point, ImageColor.getrgb("red"), thresh=30)

    # Assert
    assert_image_equal_tofile(im, "Tests/images/imagedraw_floodfill2.png")


def test_floodfill_not_negative():
    # floodfill() is experimental
    # Test that floodfill does not extend into negative coordinates

    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)
    draw.line((W / 2, 0, W / 2, H / 2), fill="green")
    draw.line((0, H / 2, W / 2, H / 2), fill="green")

    # Act
    ImageDraw.floodfill(im, (int(W / 4), int(H / 4)), ImageColor.getrgb("red"))

    # Assert
    assert_image_equal_tofile(im, "Tests/images/imagedraw_floodfill_not_negative.png")


def create_base_image_draw(
    size, mode=DEFAULT_MODE, background1=WHITE, background2=GRAY
):
    img = Image.new(mode, size, background1)
    for x in range(0, size[0]):
        for y in range(0, size[1]):
            if (x + y) % 2 == 0:
                img.putpixel((x, y), background2)
    return img, ImageDraw.Draw(img)


def test_square():
    with Image.open(os.path.join(IMAGES_PATH, "square.png")) as expected:
        expected.load()
        img, draw = create_base_image_draw((10, 10))
        draw.polygon([(2, 2), (2, 7), (7, 7), (7, 2)], BLACK)
        assert_image_equal(img, expected, "square as normal polygon failed")
        img, draw = create_base_image_draw((10, 10))
        draw.polygon([(7, 7), (7, 2), (2, 2), (2, 7)], BLACK)
        assert_image_equal(img, expected, "square as inverted polygon failed")
        img, draw = create_base_image_draw((10, 10))
        draw.rectangle((2, 2, 7, 7), BLACK)
        assert_image_equal(img, expected, "square as normal rectangle failed")
        img, draw = create_base_image_draw((10, 10))
        draw.rectangle((7, 7, 2, 2), BLACK)
        assert_image_equal(img, expected, "square as inverted rectangle failed")


def test_triangle_right():
    img, draw = create_base_image_draw((20, 20))
    draw.polygon([(3, 5), (17, 5), (10, 12)], BLACK)
    assert_image_equal_tofile(
        img, os.path.join(IMAGES_PATH, "triangle_right.png"), "triangle right failed"
    )


def test_line_horizontal():
    img, draw = create_base_image_draw((20, 20))
    draw.line((5, 5, 14, 5), BLACK, 2)
    assert_image_equal_tofile(
        img,
        os.path.join(IMAGES_PATH, "line_horizontal_w2px_normal.png"),
        "line straight horizontal normal 2px wide failed",
    )

    img, draw = create_base_image_draw((20, 20))
    draw.line((14, 5, 5, 5), BLACK, 2)
    assert_image_equal_tofile(
        img,
        os.path.join(IMAGES_PATH, "line_horizontal_w2px_inverted.png"),
        "line straight horizontal inverted 2px wide failed",
    )
    with Image.open(os.path.join(IMAGES_PATH, "line_horizontal_w3px.png")) as expected:
        expected.load()
        img, draw = create_base_image_draw((20, 20))
        draw.line((5, 5, 14, 5), BLACK, 3)
        assert_image_equal(
            img, expected, "line straight horizontal normal 3px wide failed"
        )
        img, draw = create_base_image_draw((20, 20))
        draw.line((14, 5, 5, 5), BLACK, 3)
        assert_image_equal(
            img, expected, "line straight horizontal inverted 3px wide failed"
        )

    img, draw = create_base_image_draw((200, 110))
    draw.line((5, 55, 195, 55), BLACK, 101)
    assert_image_equal_tofile(
        img,
        os.path.join(IMAGES_PATH, "line_horizontal_w101px.png"),
        "line straight horizontal 101px wide failed",
    )


def test_line_h_s1_w2():
    pytest.skip("failing")
    img, draw = create_base_image_draw((20, 20))
    draw.line((5, 5, 14, 6), BLACK, 2)
    assert_image_equal_tofile(
        img,
        os.path.join(IMAGES_PATH, "line_horizontal_slope1px_w2px.png"),
        "line horizontal 1px slope 2px wide failed",
    )


def test_line_vertical():
    img, draw = create_base_image_draw((20, 20))
    draw.line((5, 5, 5, 14), BLACK, 2)
    assert_image_equal_tofile(
        img,
        os.path.join(IMAGES_PATH, "line_vertical_w2px_normal.png"),
        "line straight vertical normal 2px wide failed",
    )

    img, draw = create_base_image_draw((20, 20))
    draw.line((5, 14, 5, 5), BLACK, 2)
    assert_image_equal_tofile(
        img,
        os.path.join(IMAGES_PATH, "line_vertical_w2px_inverted.png"),
        "line straight vertical inverted 2px wide failed",
    )
    with Image.open(os.path.join(IMAGES_PATH, "line_vertical_w3px.png")) as expected:
        expected.load()
        img, draw = create_base_image_draw((20, 20))
        draw.line((5, 5, 5, 14), BLACK, 3)
        assert_image_equal(
            img, expected, "line straight vertical normal 3px wide failed"
        )
        img, draw = create_base_image_draw((20, 20))
        draw.line((5, 14, 5, 5), BLACK, 3)
        assert_image_equal(
            img, expected, "line straight vertical inverted 3px wide failed"
        )
    img, draw = create_base_image_draw((110, 200))
    draw.line((55, 5, 55, 195), BLACK, 101)
    assert_image_equal_tofile(
        img,
        os.path.join(IMAGES_PATH, "line_vertical_w101px.png"),
        "line straight vertical 101px wide failed",
    )

    img, draw = create_base_image_draw((20, 20))
    draw.line((5, 5, 6, 14), BLACK, 2)
    assert_image_equal_tofile(
        img,
        os.path.join(IMAGES_PATH, "line_vertical_slope1px_w2px.png"),
        "line vertical 1px slope 2px wide failed",
    )


def test_line_oblique_45():
    with Image.open(
        os.path.join(IMAGES_PATH, "line_oblique_45_w3px_a.png")
    ) as expected:
        expected.load()
        img, draw = create_base_image_draw((20, 20))
        draw.line((5, 5, 14, 14), BLACK, 3)
        assert_image_equal(img, expected, "line oblique 45 normal 3px wide A failed")
        img, draw = create_base_image_draw((20, 20))
        draw.line((14, 14, 5, 5), BLACK, 3)
        assert_image_equal(img, expected, "line oblique 45 inverted 3px wide A failed")
    with Image.open(
        os.path.join(IMAGES_PATH, "line_oblique_45_w3px_b.png")
    ) as expected:
        expected.load()
        img, draw = create_base_image_draw((20, 20))
        draw.line((14, 5, 5, 14), BLACK, 3)
        assert_image_equal(img, expected, "line oblique 45 normal 3px wide B failed")
        img, draw = create_base_image_draw((20, 20))
        draw.line((5, 14, 14, 5), BLACK, 3)
        assert_image_equal(img, expected, "line oblique 45 inverted 3px wide B failed")


def test_wide_line_dot():
    # Test drawing a wide "line" from one point to another just draws a single point
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)

    # Act
    draw.line([(50, 50), (50, 50)], width=3)

    # Assert
    assert_image_similar_tofile(im, "Tests/images/imagedraw_wide_line_dot.png", 1)


def test_wide_line_larger_than_int():
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)
    expected = "Tests/images/imagedraw_wide_line_larger_than_int.png"

    # Act
    draw.line([(0, 0), (32768, 32768)], width=3)

    # Assert
    assert_image_similar_tofile(im, expected, 1)


@pytest.mark.parametrize(
    "xy",
    [
        [
            (400, 280),
            (380, 280),
            (450, 280),
            (440, 120),
            (350, 200),
            (310, 280),
            (300, 280),
            (250, 280),
            (250, 200),
            (150, 200),
            (150, 260),
            (50, 200),
            (150, 50),
            (250, 100),
        ],
        (
            400,
            280,
            380,
            280,
            450,
            280,
            440,
            120,
            350,
            200,
            310,
            280,
            300,
            280,
            250,
            280,
            250,
            200,
            150,
            200,
            150,
            260,
            50,
            200,
            150,
            50,
            250,
            100,
        ),
        [
            400,
            280,
            380,
            280,
            450,
            280,
            440,
            120,
            350,
            200,
            310,
            280,
            300,
            280,
            250,
            280,
            250,
            200,
            150,
            200,
            150,
            260,
            50,
            200,
            150,
            50,
            250,
            100,
        ],
    ],
)
def test_line_joint(xy):
    im = Image.new("RGB", (500, 325))
    draw = ImageDraw.Draw(im)

    # Act
    draw.line(xy, GRAY, 50, "curve")

    # Assert
    assert_image_similar_tofile(im, "Tests/images/imagedraw_line_joint_curve.png", 3)


def test_textsize_empty_string():
    # https://github.com/python-pillow/Pillow/issues/2783
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)

    # Act
    # Should not cause 'SystemError: <built-in method getsize of
    # ImagingFont object at 0x...> returned NULL without setting an error'
    draw.textsize("")
    draw.textsize("\n")
    draw.textsize("test\n")


@skip_unless_feature("freetype2")
def test_textsize_stroke():
    # Arrange
    im = Image.new("RGB", (W, H))
    draw = ImageDraw.Draw(im)
    font = ImageFont.truetype("Tests/fonts/FreeMono.ttf", 20)

    # Act / Assert
    assert draw.textsize("A", font, stroke_width=2) == (16, 20)
    assert draw.multiline_textsize("ABC\nAaaa", font, stroke_width=2) == (52, 44)


@skip_unless_feature("freetype2")
def test_stroke():
    for suffix, stroke_fill in {"same": None, "different": "#0f0"}.items():
        # Arrange
        im = Image.new("RGB", (120, 130))
        draw = ImageDraw.Draw(im)
        font = ImageFont.truetype("Tests/fonts/FreeMono.ttf", 120)

        # Act
        draw.text((12, 12), "A", "#f00", font, stroke_width=2, stroke_fill=stroke_fill)

        # Assert
        assert_image_similar_tofile(
            im, "Tests/images/imagedraw_stroke_" + suffix + ".png", 3.1
        )


@skip_unless_feature("freetype2")
def test_stroke_descender():
    # Arrange
    im = Image.new("RGB", (120, 130))
    draw = ImageDraw.Draw(im)
    font = ImageFont.truetype("Tests/fonts/FreeMono.ttf", 120)

    # Act
    draw.text((12, 2), "y", "#f00", font, stroke_width=2, stroke_fill="#0f0")

    # Assert
    assert_image_similar_tofile(im, "Tests/images/imagedraw_stroke_descender.png", 6.76)


@skip_unless_feature("freetype2")
def test_stroke_multiline():
    # Arrange
    im = Image.new("RGB", (100, 250))
    draw = ImageDraw.Draw(im)
    font = ImageFont.truetype("Tests/fonts/FreeMono.ttf", 120)

    # Act
    draw.multiline_text(
        (12, 12), "A\nB", "#f00", font, stroke_width=2, stroke_fill="#0f0"
    )

    # Assert
    assert_image_similar_tofile(im, "Tests/images/imagedraw_stroke_multiline.png", 3.3)


def test_same_color_outline():
    # Prepare shape
    x0, y0 = 5, 5
    x1, y1 = 5, 50
    x2, y2 = 95, 50
    x3, y3 = 95, 5

    s = ImageDraw.Outline()
    s.move(x0, y0)
    s.curve(x1, y1, x2, y2, x3, y3)
    s.line(x0, y0)

    # Begin
    for mode in ["RGB", "L"]:
        for fill, outline in [["red", None], ["red", "red"], ["red", "#f00"]]:
            for operation, args in {
                "chord": [BBOX1, 0, 180],
                "ellipse": [BBOX1],
                "shape": [s],
                "pieslice": [BBOX1, -90, 45],
                "polygon": [[(18, 30), (85, 30), (60, 72)]],
                "rectangle": [BBOX1],
            }.items():
                # Arrange
                im = Image.new(mode, (W, H))
                draw = ImageDraw.Draw(im)

                # Act
                draw_method = getattr(draw, operation)
                args += [fill, outline]
                draw_method(*args)

                # Assert
                expected = f"Tests/images/imagedraw_outline_{operation}_{mode}.png"
                assert_image_similar_tofile(im, expected, 1)


@pytest.mark.parametrize(
    "n_sides, rotation, polygon_name",
    [(4, 0, "square"), (8, 0, "regular_octagon"), (4, 45, "square")],
)
def test_draw_regular_polygon(n_sides, rotation, polygon_name):
    im = Image.new("RGBA", size=(W, H), color=(255, 0, 0, 0))
    filename_base = f"Tests/images/imagedraw_{polygon_name}"
    filename = (
        f"{filename_base}.png"
        if rotation == 0
        else f"{filename_base}_rotate_{rotation}.png"
    )
    draw = ImageDraw.Draw(im)
    bounding_circle = ((W // 2, H // 2), 25)
    draw.regular_polygon(bounding_circle, n_sides, rotation=rotation, fill="red")
    assert_image_equal_tofile(im, filename)


@pytest.mark.parametrize(
    "n_sides, expected_vertices",
    [
        (3, [(28.35, 62.5), (71.65, 62.5), (50.0, 25.0)]),
        (4, [(32.32, 67.68), (67.68, 67.68), (67.68, 32.32), (32.32, 32.32)]),
        (
            5,
            [
                (35.31, 70.23),
                (64.69, 70.23),
                (73.78, 42.27),
                (50.0, 25.0),
                (26.22, 42.27),
            ],
        ),
        (
            6,
            [
                (37.5, 71.65),
                (62.5, 71.65),
                (75.0, 50.0),
                (62.5, 28.35),
                (37.5, 28.35),
                (25.0, 50.0),
            ],
        ),
    ],
)
def test_compute_regular_polygon_vertices(n_sides, expected_vertices):
    bounding_circle = (W // 2, H // 2, 25)
    vertices = ImageDraw._compute_regular_polygon_vertices(bounding_circle, n_sides, 0)
    assert vertices == expected_vertices


@pytest.mark.parametrize(
    "n_sides, bounding_circle, rotation, expected_error, error_message",
    [
        (None, (50, 50, 25), 0, TypeError, "n_sides should be an int"),
        (1, (50, 50, 25), 0, ValueError, "n_sides should be an int > 2"),
        (3, 50, 0, TypeError, "bounding_circle should be a tuple"),
        (
            3,
            (50, 50, 100, 100),
            0,
            ValueError,
            "bounding_circle should contain 2D coordinates "
            "and a radius (e.g. (x, y, r) or ((x, y), r) )",
        ),
        (
            3,
            (50, 50, "25"),
            0,
            ValueError,
            "bounding_circle should only contain numeric data",
        ),
        (
            3,
            ((50, 50, 50), 25),
            0,
            ValueError,
            "bounding_circle centre should contain 2D coordinates (e.g. (x, y))",
        ),
        (
            3,
            (50, 50, 0),
            0,
            ValueError,
            "bounding_circle radius should be > 0",
        ),
        (
            3,
            (50, 50, 25),
            "0",
            ValueError,
            "rotation should be an int or float",
        ),
    ],
)
def test_compute_regular_polygon_vertices_input_error_handling(
    n_sides, bounding_circle, rotation, expected_error, error_message
):
    with pytest.raises(expected_error) as e:
        ImageDraw._compute_regular_polygon_vertices(bounding_circle, n_sides, rotation)
    assert str(e.value) == error_message