Skip to content

Latest commit

 

History

History
121 lines (76 loc) · 5.82 KB

README.md

File metadata and controls

121 lines (76 loc) · 5.82 KB

NodeSchool Rotterdam

This information is for the workshop given on Oct. 31st at Pixelbar, The Netherlands.

👀 Prerequisites📚 Getting started⚡️ Connecting the microcontroller to your computer👨‍💻 Run code

👀 Prerequisites

  • Microcontroller: Seeed Studio XIAO ESP32C3
  • Components: breadboard, wires, LEDs, buttons, and PIM board
  • USB-C cable to connect microcontroller to your computer
  • A computer
  • Basic JavaScript knowledge: JS for cats

📚 Getting started

  1. Install Node.js (v18 recommended, check by running node -v in your terminal)
  2. Install Visual Studio Code
  3. Install DeviceScript extension for Visual Studio Code
  4. Clone or download this project
  5. Open the cloned directory in Visual Studio Code
  6. Install dependencies
    • Run in terminal: npm install

🚀 Connecting the microcontroller to your computer

  1. Connect the microcontroller to your computer using a USB-C cable
  2. Open Visual Studio Code, make sure you have the DeviceScript extension installed
  3. Open the DeviceScript panel (1)
  4. Click on "Connect Device" (2)
  5. A prompt will appear, select "Serial" (3)
  6. The device should now appear in the panel

Connect to a device

Device successfully connected

👨‍💻 Run code

To run your code on the microcontroller, first follow the connection steps above, then open src/main.ts and press the run button in the upper-right corner.

  1. Follow the steps for connecting the microcontroller above.
  2. Open src/main.ts
  3. Press the run button in the upper-right corner (1)
  4. A panel should appear on the bottom or right side of the screen (2). The panel shows the output of your code (e.g., any console.logs in your code).
  5. VS Code may prompt to start the DeviceScript simulator. You can press "Don't show again". If you're interested in simulation, learn more here.
  6. To stop the output, disconnect the device, or press Ctrl+C in the output panel (2)

⚡️ Flashing the microcontroller

The microcontroller comes pre-flashed with the DeviceScript firmware. An update to DeviceScript might require you to re-flash the microcontroller.

  1. Connect the microcontroller to your computer using a USB-C cable
  2. Open the Command Palette (Command+Shift+P on Mac, Ctrl+Shift+P on Windows and Linux) and enter "flash".

  1. Select DeviceScript: Flash Firmware...
  2. You'll be prompted to select a device, search for "seeed studio" and select Seeed Studio XIAO ESP32C3

  1. A command prompt should appear on the bottom or the side of your editor, wait until it says "flash OK". You can now reconnect to the device.

If you're experiencing any problems you can try to clean the flash, follow steps 1 and 2, and select DeviceScript: Clean Flash....

Project 1: Blinky

For the first project we'll create what is known as the "hello world" for hardware, we'll make an LED blink!

Connect the components according to the schematic displayed above.

You can find the code for this project in src/blinky.ts. To run the code, replace the contents of src/main.ts with import "./blinky";. Play around with the code, e.g., change the interval in which the LED blinks up.

Project 2: Input

We'll now use a button to make the LED light up.

You can find the code for this project in src/blinky.ts. To run the code, replace the contents of src/main.ts with import "./input";. Play around with the code, e.g., dim the LED on a button press (tip: add dimmable: true to startLightBulb).

Project 3: PIM

PIM board connected to ESP32

Now let's connect PIM. PIM is a custom designed PCB - which means you don't need a breadboard anymore. It contains 4 buttons and 4 LEDs. You can find the code for this project in src/pim.ts. To run the code, replace the contents of src/main.ts with import "./pim";.

The provided example demonstrates the basic functionality of toggling an LED on or off in response to a button press.

Experiment with the code, e.g., make the LEDs blink up in some sequence.

Project 4: it's your turn!

Now it's your turn to play around with the hardware and software! You can extend any of the above projects, or create something new. Here are some ideas:

  • Create a digital dice roller with the PIM.
  • Create a reaction time game where a random LED serves as the target. You can even post the reaction times to a server to create a high-score list!
  • Create Simon Says.
  • Create a temperature sensor that publishes to MQTT. A temperature sensor (SHT30) is provided! You can follow this guide: https://microsoft.github.io/devicescript/samples/temperature-mqtt. Note: you'll have to make some adjustments for the hardware provided. MQTT is a protocol specifically designed to send and receive small messages, especially dealing with IoT devices. You can use the MQTT Explorer to inspect the messages being sent.

Refer to the pinout diagram below when connecting components.

Seeed Studio XIAO ESP32C3 pinout reference