check

#!/bin/bash
# SPDX-License-Identifier: GPL-3.0+
# Copyright (C) 2017 Omar Sandoval

shopt -s extglob

_warning() {
	echo "$0: $*" >&2
}

_error() {
	echo "$0: $*" >&2
	exit 1
}

_found_test() {
	local test_name="$1"
	local explicit="$2"

	unset CAN_BE_ZONED DESCRIPTION QUICK TIMED requires device_requires \
	      test test_device fallback_device cleanup_fallback_device \
	      set_conditions

	# shellcheck disable=SC1090
	if ! . "tests/${test_name}"; then
		return 1
	fi

	if [[ -z $DESCRIPTION ]]; then
		_warning "${test_name} does not define DESCRIPTION"
		return 1
	fi

	if declare -fF test >/dev/null && declare -fF test_device >/dev/null; then
		_warning "${test_name} defines both test() and test_device()"
		return 1
	fi

	if ! declare -fF test >/dev/null && ! declare -fF test_device >/dev/null; then
		_warning "${test_name} does not define test() or test_device()"
		return 1
	fi

	if declare -fF device_requires >/dev/null && ! declare -fF test_device >/dev/null; then
		_warning "${test_name} defines device_requires() but not test_device()"
		return 1
	fi

	if declare -fF fallback_device >/dev/null && ! declare -fF cleanup_fallback_device >/dev/null; then
		_warning "${test_name} defines fallback_device() but not cleanup_fallback_device()"
		return 1
	fi

	if declare -fF cleanup_fallback_device >/dev/null && ! declare -fF fallback_device >/dev/null; then
		_warning "${test_name} defines cleanup_fallback_device() but not fallback_device()"
		return 1
	fi

	if [[ -n $CAN_BE_ZONED ]] && declare -fF test >/dev/null && declare -fF set_conditions >/dev/null; then
		_warning "${test_name} defines both CAN_BE_ZONED and set_conditions()"
		return 1
	fi

	if (( QUICK && TIMED )); then
		_warning "${test_name} cannot be both QUICK and TIMED"
		return 1
	fi

	if (( ! explicit )); then
		if [[ $DEVICE_ONLY -ne 0 ]] && ! declare -fF test_device >/dev/null; then
			return
		fi
		if (( QUICK_RUN && !QUICK && !TIMED )); then
			return
		fi
		if [[ -n ${EXCLUDE["$test_name"]} ]]; then
			return
		fi
	fi

	printf '%s\0' "$test_name"
}

_found_group() {
	local group="$1"
	local explicit="$2"

	local test_path

	if (( ! explicit )); then
		if [[ -n ${EXCLUDE["$group"]} ]]; then
			return
		fi
	fi

	while IFS= read -r -d '' test_path; do
		_found_test "${test_path#tests/}" 0
	done < <(find "tests/$group" -type f -name '[0-9][0-9][0-9]' -print0)
}

_find_tests() {
	if [[ $# -eq 0 ]]; then
		# No filters given, run all tests except for the meta group.
		local group_path
		while IFS= read -r -d '' group_path; do
			if [[ $group_path != tests/meta ]]; then
				_found_group "${group_path#tests/}" 0
			fi
		done < <(find tests -mindepth 2 -type f -name rc -printf '%h\0')
	else
		local filter
		for filter in "$@"; do
			# A filter is bad if it:
			#     - Is an absolute path
			#     - Is a relative path containing ".."
			if [[ $filter =~ ^/|(^|/)\.\.(/|$) ]]; then
				_warning "bad filter ${filter}"
				continue
			fi
			# Remove leading and internal "." components.
			filter="${filter##+(./)}"
			filter="${filter//\/+(.\/)/\/}"
			# Remove repeated "/".
			filter="${filter//\/+(\/)/\/}"
			# Remove leading "tests/"
			filter="${filter#tests/}"

			if [[ -d tests/$filter ]]; then
				_found_group "$filter" 1
			elif [[ -f tests/$filter ]]; then
				_found_test "$filter" 1
			else
				_warning "no group or test named ${filter}"
			fi
		done
	fi
}

# Return the dmesg log since the start of this test.
_dmesg_since_test_start()
{
	dmesg | grep -A 9999 "$dmesg_marker"
}

_check_dmesg() {
	local dmesg_marker="$1"
	local seqres="${RESULTS_DIR}/${TEST_NAME}"

	if [[ $CHECK_DMESG -eq 0 ]]; then
		return 0
	fi

	_dmesg_since_test_start | bash -c "$DMESG_FILTER" >"${seqres}.dmesg"
	grep -q -e "kernel BUG at" \
	     -e "WARNING:" \
	     -e "BUG:" \
	     -e "Oops:" \
	     -e "possible recursive locking detected" \
	     -e "Internal error" \
	     -e "INFO: suspicious RCU usage" \
	     -e "INFO: possible circular locking dependency detected" \
	     -e "general protection fault:" \
	     -e "blktests failure" \
	     "${seqres}.dmesg"
	# shellcheck disable=SC2181
	if [[ $? -eq 0 ]]; then
		return 1
	else
		rm -f "${seqres}.dmesg"
		return 0
	fi
}

_read_last_test_run() {
	local seqres="${RESULTS_DIR}/${TEST_NAME}"

	if [[ ! -e $seqres ]]; then
		return
	fi

	local key value
	while IFS=$'\t' read -r key value; do
		if [[ ! $key =~ ^description|date|status|reason|exit_status$ ]]; then
			LAST_TEST_RUN["$key"]="$value"
		fi
	done <"$seqres"
}

_write_test_run() {
	local key value
	for key in "${!TEST_RUN[@]}"; do
		value="${TEST_RUN["$key"]}"
		printf '%s\t%s\n' "$key" "$value" >>"$seqres"
	done
}

_output_status() {
	local test="$1"
	local status="$2"
	local str="${test} "

	[[ ${COND_DESC:-} ]] && str="$str(${COND_DESC}) "
	[[ ${DESCRIPTION:-} ]] && str="$str(${DESCRIPTION})"
	printf '%-60s' "${str}"
	if [[ -z $status ]]; then
		echo
		return
	fi

	echo -n " ["
	if [[ -t 1 ]]; then
		case "$status" in
		passed)
			tput setaf 2
			;;
		failed)
			tput setaf 1
			;;
		"not run")
			tput setaf 3
			;;
		esac
	fi
	echo -n "$status"
	if [[ -t 1 ]]; then
		tput sgr0
	fi
	echo "]"
}

_output_skip_reasons()
{
	for reason in "${SKIP_REASONS[@]}"; do
		echo "    $reason"
	done
}

_output_notrun() {
	_output_status "$1" "not run"
	_output_skip_reasons
}

_output_last_test_run() {
	if [[ "${TEST_DEV:-}" ]]; then
		_output_status "$TEST_NAME => $(basename "$TEST_DEV")" ""
	else
		_output_status "$TEST_NAME" ""
	fi

	{
	local key
	for key in "${!LAST_TEST_RUN[@]}"; do
		printf '    %s\t%s\t...\n' "$key" "${LAST_TEST_RUN["$key"]}"
	done
	} | sort -t $'\t' -k 1,1 | column -t -s $'\t'
}

_output_test_run() {
	if [[ -t 1 ]]; then
		# Move the cursor back up to the status.
		tput cuu $((${#LAST_TEST_RUN[@]} + 1))
	fi

	local status=${TEST_RUN["status"]}
	if [[ $status = pass || $status = fail ]]; then
		status+="ed"
	fi
	if [[ "${TEST_DEV:-}" ]]; then
		_output_status "$TEST_NAME => $(basename "$TEST_DEV")" "$status"
	else
		_output_status "$TEST_NAME" "$status"
	fi

	{
	local key last_value value
	{
	for key in "${!LAST_TEST_RUN[@]}"; do
		last_value="${LAST_TEST_RUN["$key"]}"
		value="${TEST_RUN["$key"]}"
		printf '    %s\t%s\t...\t%s\n' "$key" "$last_value" "$value"
	done
	} | sort -t $'\t' -k 1,1

	{
	for key in "${!TEST_RUN[@]}"; do
		if [[ $key =~ ^description|date|status|reason|exit_status$ ]]; then
			continue
		fi
		# [[ -v array[key] ]] was added in Bash 4.3. Do it this ugly
		# way to support older versions.
		if [[ -n ${LAST_TEST_RUN["$key"]} || ${LAST_TEST_RUN["$key"]-unset} != unset ]]; then
			continue
		fi
		value="${TEST_RUN["$key"]}"
		printf '    %s\t\t...\t%s\n' "$key" "$value"
	done
	} | sort -t $'\t' -k 1,1
	} | column -t -s $'\t'

	if [[ $status = "not run" ]]; then
		_output_skip_reasons
	fi
}

_register_test_cleanup() {
	TEST_CLEANUP=$1
}

_cleanup() {
	if [[ -v TEST_CLEANUP ]]; then
		${TEST_CLEANUP}
	fi

	if [[ "${TMPDIR:-}" ]]; then
		rm -rf "$TMPDIR"
		unset TMPDIR
	fi

	local key value
	for key in "${!SYSFS_QUEUE_SAVED[@]}"; do
		value="${SYSFS_QUEUE_SAVED["$key"]}"
		echo "$value" >"${key}"
		unset "SYSFS_QUEUE_SAVED[$key]"
	done

	if [[ "${RESTORE_CPUS_ONLINE:-}" ]]; then
		local cpu
		for cpu in "${!CPUS_ONLINE_SAVED[@]}"; do
			echo "${CPUS_ONLINE_SAVED["$cpu"]}" >"/sys/devices/system/cpu/cpu$cpu/online"
		done
		unset RESTORE_CPUS_ONLINE
	fi

	_exit_cgroup2
}

_call_test() {
	local test_func="$1"
	local seqres="${RESULTS_DIR}/${TEST_NAME}"
	# shellcheck disable=SC2034
	FULL="${seqres}.full"
	declare -A SYSFS_QUEUE_SAVED

	declare -A LAST_TEST_RUN
	_read_last_test_run
	_output_last_test_run

	declare -A TEST_RUN
	TEST_RUN["date"]="$(date "+%F %T")"
	TEST_RUN["description"]="${DESCRIPTION}"

	mkdir -p "$(dirname "$seqres")"
	# Remove leftovers from last time.
	rm -f "${seqres}" "${seqres}."*

	if [[ -v SKIP_REASONS ]]; then
		TEST_RUN["status"]="not run"
	else
		if [[ -w /dev/kmsg ]]; then
			local dmesg_marker="run blktests $TEST_NAME at ${TEST_RUN["date"]}"
			echo "$dmesg_marker" >> /dev/kmsg
		else
			local dmesg_marker=""
			CHECK_DMESG=0
		fi
		$LOGGER_PROG "run blktests $TEST_NAME"

		unset TEST_CLEANUP
		trap _cleanup EXIT
		if ! TMPDIR="$(mktemp --tmpdir -p "$OUTPUT" -d "tmpdir.${TEST_NAME//\//.}.XXX")"; then
			return
		fi

		TIMEFORMAT="%Rs"
		pushd . >/dev/null || return
		{ time "$test_func" >"${seqres}.out" 2>&1; } 2>"${seqres}.runtime"
		TEST_RUN["exit_status"]=$?
		popd >/dev/null || return
		TEST_RUN["runtime"]="$(cat "${seqres}.runtime")"
		rm -f "${seqres}.runtime"

		_cleanup

		if [[ -v SKIP_REASONS ]]; then
			TEST_RUN["status"]="not run"
		elif ! diff "tests/${TEST_NAME}.out" "${seqres}.out" >/dev/null; then
			mv "${seqres}.out" "${seqres}.out.bad"
			TEST_RUN["status"]=fail
			TEST_RUN["reason"]=output
		elif [[ ${TEST_RUN["exit_status"]} -ne 0 ]]; then
			TEST_RUN["status"]=fail
			TEST_RUN["reason"]="exit"
		elif ! _check_dmesg "$dmesg_marker"; then
			TEST_RUN["status"]=fail
			TEST_RUN["reason"]=dmesg
		else
			TEST_RUN["status"]=pass
		fi
		rm -f "${seqres}.out"
	fi

	_write_test_run
	_output_test_run

	if [[ ${TEST_RUN["status"]} = fail ]]; then
		case "${TEST_RUN["reason"]}" in
		output)
			diff -u "tests/${TEST_NAME}.out" "${seqres}.out.bad" | awk "
			{
				if (NR > 10) {
					print \"    ...\"
					print \"    (Run 'diff -u tests/${TEST_NAME}.out ${seqres}.out.bad' to see the entire diff)\"
					exit
				}
				print \"    \" \$0
			}"
			;;
		exit)
			echo "    exited with status ${TEST_RUN["exit_status"]}"
			;;
		dmesg)
			echo "    something found in dmesg:"
			awk "
			{
				if (NR > 10) {
					print \"    ...\"
					print \"    (See '${seqres}.dmesg' for the entire message)\"
					exit
				}
				print \"    \" \$0
			}" "${seqres}.dmesg"
			;;
		esac
		return 1
	else
		return 0
	fi
}

_test_dev_is_zoned() {
	[[ -e "${TEST_DEV_SYSFS}/queue/zoned" &&
	   $(cat "${TEST_DEV_SYSFS}/queue/zoned") != none ]]
}

# Arguments: module to unload ($1) and retry count ($2).
_unload_module() {
	local i m=$1 rc=${2:-1} reason

	[ ! -e "/sys/module/$m" ] && return 0
	for ((i=rc;i>0;i--)); do
		reason=$(modprobe -r "$m" 2>&1)
		[ ! -e "/sys/module/$m" ] && return 0
		sleep .1
	done
	echo "${reason}" >&2
	return 1
}

_unload_modules() {
	local i

	for ((i=${#MODULES_TO_UNLOAD[@]}; i > 0; i--)); do
		_unload_module "${MODULES_TO_UNLOAD[i-1]}" 10
	done

	unset MODULES_TO_UNLOAD
}

_check_and_call_test() {
	local postfix

	if declare -fF requires >/dev/null; then
		requires
	fi

	[[ -n $COND_DESC ]] && postfix=_${COND_DESC//[ =]/_}
	RESULTS_DIR="$OUTPUT/nodev${postfix}"
	_call_test test
}

_check_and_call_test_device() {
	local postfix
	local unset_skip_reason
	local ret

	if declare -fF requires >/dev/null; then
		requires
	fi

	[[ -n $COND_DESC ]] && postfix=_${COND_DESC//[ =]/_}
	for TEST_DEV in "${TEST_DEVS[@]}"; do
		TEST_DEV_SYSFS="${TEST_DEV_SYSFS_DIRS["$TEST_DEV"]}"
		TEST_DEV_PART_SYSFS="${TEST_DEV_PART_SYSFS_DIRS["$TEST_DEV"]}"

		unset_skip_reason=0
		if [[ ! -v SKIP_REASONS ]]; then
			unset_skip_reason=1
			if (( !CAN_BE_ZONED )) && _test_dev_is_zoned; then
				SKIP_REASONS+=("${TEST_DEV} is a zoned block device")
			elif declare -fF device_requires >/dev/null; then
				device_requires
			fi
		fi
		RESULTS_DIR="$OUTPUT/$(basename "$TEST_DEV")""$postfix"
		if ! _call_test test_device; then
			ret=1
		fi
		if (( unset_skip_reason )); then
			unset SKIP_REASONS
		fi
	done

	return $ret
}

_run_test() {
	TEST_NAME="$1"
	CAN_BE_ZONED=0
	CHECK_DMESG=1
	DMESG_FILTER="cat"
	RUN_FOR_ZONED=0
	COND_DESC=""
	FALLBACK_DEVICE=0
	MODULES_TO_UNLOAD=()

	local nr_conds cond_i
	local ret=0

	# Ensure job control monitor mode is off in the sub-shell for test case
	# runs to suppress job status output.
	set +m

	# shellcheck disable=SC1090
	. "tests/${TEST_NAME}"

	if declare -fF test >/dev/null; then
		if ((RUN_ZONED_TESTS && CAN_BE_ZONED)); then
			. "common/zoned"
		fi
		if declare -fF set_conditions >/dev/null; then
			nr_conds=$(set_conditions)
			for ((cond_i = 0; cond_i < nr_conds; cond_i++)); do
				set_conditions $cond_i
				_check_and_call_test
				ret=$(( ret || $? ))
				unset SKIP_REASONS
			done
		else
			_check_and_call_test
			ret=$?
		fi
	else
		if [[ ${#TEST_DEVS[@]} -eq 0 ]] && \
			declare -fF fallback_device >/dev/null; then
			if ! test_dev=$(fallback_device); then
				_warning "$TEST_NAME: fallback_device call failure"
				return 0
			fi

			if ! _find_sysfs_dirs "$test_dev"; then
				_warning "$TEST_NAME: could not find sysfs directory for ${test_dev}"
				cleanup_fallback_device
				return 0
			fi
			TEST_DEVS=( "${test_dev}" )
			FALLBACK_DEVICE=1
		fi

		if [[ ${#TEST_DEVS[@]} -eq 0 ]]; then
			return 0
		fi

		if declare -fF set_conditions >/dev/null; then
			nr_conds=$(set_conditions)
			for ((cond_i = 0; cond_i < nr_conds; cond_i++)); do
				set_conditions $cond_i
				_check_and_call_test_device
				ret=$(( ret || $? ))
				unset SKIP_REASONS
			done
		else
			_check_and_call_test_device
			ret=$?
		fi

		if (( FALLBACK_DEVICE )); then
			cleanup_fallback_device
			unset "TEST_DEV_SYSFS_DIRS[${TEST_DEVS[0]}]"
			unset "TEST_DEV_PART_SYSFS_DIRS[${TEST_DEVS[0]}]"
			TEST_DEVS=()
		fi
	fi

	_unload_modules

	return $ret
}

_run_group() {
	local tests=("$@")
	local group="${tests["0"]%/*}"

	# shellcheck disable=SC1090
	. "tests/${group}/rc"

	if declare -fF group_requires >/dev/null; then
		group_requires
		if [[ -v SKIP_REASONS ]]; then
			_output_notrun "${group}/***"
			return 0
		fi
	fi

	if declare -fF group_device_requires >/dev/null; then
		local i
		for i in "${!TEST_DEVS[@]}"; do
			TEST_DEV="${TEST_DEVS[$i]}"
			TEST_DEV_SYSFS="${TEST_DEV_SYSFS_DIRS["$TEST_DEV"]}"
			# shellcheck disable=SC2034
			TEST_DEV_PART_SYSFS="${TEST_DEV_PART_SYSFS_DIRS["$TEST_DEV"]}"
			group_device_requires
			if [[ -v SKIP_REASONS ]]; then
				_output_notrun "${group}/*** => $(basename "$TEST_DEV")"
				unset "TEST_DEVS[$i]"
				unset SKIP_REASONS
			fi
		done
		# Fix the array indices.
		TEST_DEVS=("${TEST_DEVS[@]}")
		unset TEST_DEV
	fi

	local ret=0
	local test_name
	for test_name in "${tests[@]}"; do
		if ! ( _run_test "$test_name" ); then
			ret=1
		fi
	done
	return $ret
}

_find_sysfs_dirs() {
	local test_dev="$1"
	local sysfs_path
	local major=$((0x$(stat -L -c '%t' "$test_dev")))
	local minor=$((0x$(stat -L -c '%T' "$test_dev")))

	# Get the canonical sysfs path
	if ! sysfs_path="$(realpath "/sys/dev/block/${major}:${minor}")"; then
		return 1
	fi

	if [[ -r "${sysfs_path}"/partition ]]; then
		# If the device is a partition device, cut the last device name
		# of the canonical sysfs path to access to the sysfs of its
		# holder device.
		#   e.g.   .../block/sda/sda1  ->  ...block/sda
		TEST_DEV_SYSFS_DIRS["$test_dev"]="${sysfs_path%/*}"
		TEST_DEV_PART_SYSFS_DIRS["$test_dev"]="${sysfs_path}"
	else
		TEST_DEV_SYSFS_DIRS["$test_dev"]="${sysfs_path}"
		TEST_DEV_PART_SYSFS_DIRS["$test_dev"]=""
	fi
}

declare -A TEST_DEV_SYSFS_DIRS
declare -A TEST_DEV_PART_SYSFS_DIRS
_check() {
	# shellcheck disable=SC2034
	SRCDIR="$(realpath src)"

	local test_dev
	for test_dev in "${TEST_DEVS[@]}"; do
		if [[ ! -e $test_dev ]]; then
			_error "${test_dev} does not exist"
		elif [[ ! -b $test_dev ]]; then
			_error "${test_dev} is not a block device"
		fi

		if ! _find_sysfs_dirs "$test_dev"; then
			_error "could not find sysfs directory for ${test_dev}"
		fi
	done

	local test_name group prev_group
	local tests=()
	local ret=0
	while IFS= read -r -d '' test_name; do
		group="${test_name%/*}"
		if [[ $group != "$prev_group" ]]; then
			prev_group="$group"
			if [[ ${#tests[@]} -gt 0 ]]; then
				if ! ( _run_group "${tests[@]}" ); then
					ret=1
				fi
				tests=()
			fi
		fi
		tests+=("$test_name")
	done < <(_find_tests "$@" | sort -zu)

	if [[ ${#tests[@]} -gt 0 ]]; then
		if ! ( _run_group "${tests[@]}" ); then
			ret=1
		fi
	fi

	return $ret
}

usage () {
	USAGE_STRING="\
usage: $0 [options] [group-or-test...]

Run blktests

Test runs:
  -d, --device-only	 only run tests which use a test device from the
			 TEST_DEVS config setting

  -o, --output=DIR	 output results to the given directory (the default is
			 ./results)

  -q, --quick=SECONDS	 do a quick run (only run quick tests and limit the
			 runtime of longer tests to the given timeout,
			 defaulting to 30 seconds)

  -x, --exclude=TEST	 exclude a test (or test group) from the list of
			 tests to run

Miscellaneous:
  -c, --config=FILE	 load configuration from FILE instead of the default
			 (\"./config\"); if this option is used multiple times,
			 all of the given files are loaded

  -h, --help             display this help message and exit"

	case "$1" in
		out)
			echo "$USAGE_STRING"
			exit 0
			;;
		err)
			echo "$USAGE_STRING" >&2
			exit 1
			;;
	esac
}

if ! TEMP=$(getopt -o 'do:q::x:c:h' --long 'device-only,quick::,exclude:,output:,config:,help' -n "$0" -- "$@"); then
	exit 1
fi

eval set -- "$TEMP"
unset TEMP

LOADED_CONFIG=0
OPTION_EXCLUDE=()
while true; do
	case "$1" in
		'-d'|'--device-only')
			OPTION_DEVICE_ONLY=1
			shift
			;;
		'-o'|'--output')
			OPTION_OUTPUT="$2"
			shift 2
			;;
		'-q'|'--quick')
			OPTION_QUICK_RUN=1
			OPTION_TIMEOUT="$2"
			shift 2
			;;
		'-x'|'--exclude')
			# shellcheck disable=SC2190
			OPTION_EXCLUDE+=("$2")
			shift 2
			;;
		'-c'|'--config')
			# shellcheck source=/dev/null
			. "$2"
			LOADED_CONFIG=1
			shift 2
			;;
		'-h'|'--help')
			usage out
			;;
		'--')
			shift
			break
			;;
		*)
			usage err
			;;
	esac
done

# Load the default configuration file if "-c" was not used.
if [[ $LOADED_CONFIG -eq 0 && -r config ]]; then
	# shellcheck source=/dev/null
	. config
fi

# Options on the command line take precedence over the configuration file. If
# neither set the option and we didn't get it from the environment, then we
# fall back to the default.
DEVICE_ONLY="${OPTION_DEVICE_ONLY:-${DEVICE_ONLY:-0}}"

OUTPUT="${OPTION_OUTPUT:-${OUTPUT:-results}}"

QUICK_RUN="${OPTION_QUICK_RUN:-${QUICK_RUN:-0}}"
if [[ -n $OPTION_QUICK_RUN && $OPTION_QUICK_RUN -ne 0 ]]; then
	TIMEOUT="${OPTION_TIMEOUT:-${TIMEOUT:-30}}"
fi

if [[ "${EXCLUDE:-}" ]] && ! declare -p EXCLUDE | grep -q '^declare -a'; then
	# If EXCLUDE was not defined as an array, convert it to one.
	# shellcheck disable=SC2128,SC2190,SC2206
	EXCLUDE=($EXCLUDE)
elif [[ ! "${EXCLUDE:-}" ]]; then
	EXCLUDE=()
fi
# Convert the exclude list to an associative array. The lists from the
# configuration file and command line options are merged.
TEMP_EXCLUDE=("${EXCLUDE[@]}" "${OPTION_EXCLUDE[@]}")
unset EXCLUDE
declare -A EXCLUDE
for filter in "${TEMP_EXCLUDE[@]}"; do
	EXCLUDE["$filter"]=1
done
unset OPTION_EXCLUDE TEMP_EXCLUDE

if [[ "${TEST_DEVS:-}" ]] && ! declare -p TEST_DEVS | grep -q '^declare -a'; then
	# If TEST_DEVS was not defined as an array, convert it to one.
	# shellcheck disable=SC2128,SC2206
	TEST_DEVS=($TEST_DEVS)
elif [[ ! "${TEST_DEVS:-}" ]]; then
	TEST_DEVS=()
fi

: "${LOGGER_PROG:="$(type -P logger || echo true)"}"
: "${RUN_ZONED_TESTS:=0}"
: "${NORMAL_USER:=''}"

# Sanity check options.
if [[ $QUICK_RUN -ne 0 && ! "${TIMEOUT:-}" ]]; then
	_error "QUICK_RUN specified without TIMEOUT"
fi

if [[ $DEVICE_ONLY -ne 0 && ${#TEST_DEVS[@]} -eq 0 ]]; then
	_error "DEVICE_ONLY specified without TEST_DEVS"
fi

mkdir -p "$OUTPUT"
OUTPUT="$(realpath "$OUTPUT")"

_check "$@"