Replies: 12 comments 37 replies
-
|
I upgraded my setup to Thanks for implementing so that the Adaptive Lightning controller stops if the light has been modified externally. I've yet to put it to an extreme test, but it does seem to work as advertised. I only have 4 lights that support adaptive lightning, so I can't do any extreme testing. But so far so good! |
Beta Was this translation helpful? Give feedback.
-
|
I have activated the feature, but so far I am not getting the option for adaptive lighting for any of my zigbee RGB bulbs. I did mark adaptive_lighting to true and entered the “COLOR_MODE” experimental feature. |
Beta Was this translation helpful? Give feedback.
-
|
Adaptive lighting is only available for lights that support color temperature. |
Beta Was this translation helpful? Give feedback.
-
|
In the first view, it looks good to me, my lights are completely available with Adaptive lightning. |
Beta Was this translation helpful? Give feedback.
-
|
I have been testning the beta with adaptive lighting feature and now seen few issues If I repair or remove/add a bulb in zigbee2mqtt, the adaptive lighting will disappear for those bulbs. I see no way how to get it back. |
Beta Was this translation helpful? Give feedback.
-
|
The temp control is there |
Beta Was this translation helpful? Give feedback.
-
|
That's odd. Having brightness and color temperature are they only things needed in my code to try to create the Adaptive Lighting Controller (besides enabling it in the configuration). Do you see anything in the logs when you turn on debug logging? Would probably show something during start up, I'd say, if the controller can't be created. Perhaps it's an issue in HAP-NodeJS that I'm not aware of. |
Beta Was this translation helpful? Give feedback.
-
|
The log is not showing anything in debug mode. A weird issue is now I don't think that adaptive lighting is working at all. I have tried to go back to older version of the plugin but adaptive lighting remains in homekit. That maybe an issue with Apple? Let's say I pick the color blue for a bulb, it changes. Then when picking the adaptive ligting the bulb remains blue. Even if I change the brightness it still remains blue. |
Beta Was this translation helpful? Give feedback.
-
Not that I'm aware off. Most of the logic is actually part of HAP-NodeJS, so outside of the plugin.
I believe I've experienced the opposite once, but I'll see if I can find a reason within the plugin that would explain this behavior. Perhaps I'm missing a signal to the Adaptive Lighting controller. |
Beta Was this translation helpful? Give feedback.
-
|
As mentioned on Discord: perhaps you also need to power cycle your home hub (e.g. Apple TV, HomePod or iPad), as this device will coordinate the Adaptive Lighting feature so it might also have some data cached. (Just leaving it here as well so that others might also be able to find it.) |
Beta Was this translation helpful? Give feedback.
-
|
I have the GU10 bulbs from ikea and the adaptive lighting is recognized and it works if I keep the light on, but if I turn it off during the day and turn it on at night, the temperature of the color is the same as in the day time. If I go to the color panel on HomeKit and change the brightness to any value and back to 100% the change of color is applied (the adaptive lighting was always selected) I have a few bulbs from another plugin and when I turn them on the temperate corrects it self in a few seconds. Could I be missing something? |
Beta Was this translation helpful? Give feedback.
-
|
Would it be possible for you to enable debug logging in Homebridge? It should show if the color temperature gets updated in HomeKit (should see regular updates) |
Beta Was this translation helpful? Give feedback.
-
|
I enabled the debug function and here are some results: Got this after the reboot [12/30/2022, 2:26:01 PM] [zigbee2mqtt] adaptive_lighting: disable due to large delta (121)��� Turned on the "office" Lights [12/30/2022, 2:26:50 PM] [zigbee2mqtt] Handled device update for Office 6: {"brightness":254,"color_mode":"color_temp","color_temp":263,"linkquality":149,"power_on_behavior":"off","state":"ON","update":{"installed_version":"1.0.012","state":"idle"},"update_available":null} This is the only output of zigbee2mqtt plugin |
Beta Was this translation helpful? Give feedback.
-
|
Sounds as if the mechanism to prevent unnecessary Do you ever see such a message being published by homebridge-z2m? |
Beta Was this translation helpful? Give feedback.
-
|
This are the the results of "color_temp" I can't find nothing more with "color_temp" as filter �[37m[12/30/2022, 2:25:58 PM] �[39m�[36m[zigbee2mqtt]�[39m �[90mPending get: state, brightness, color_temp�[39m |
Beta Was this translation helpful? Give feedback.
-
|
If I change the color manually it starts to appear in the log like the "closet" light. Like it activates the adaptive function. [12/30/2022, 5:27:58 PM] [zigbee2mqtt] adaptive_lighting: Office 2: skipped color_temp (new: 309; old: 309 |
Beta Was this translation helpful? Give feedback.
-
|
When I set adaptive lighting on two Gledopto bulbs (GL-B-001Z), the change in color temperature turns the bulbs on. Any tricks to avoid this? Relevant parts of the log file |
Beta Was this translation helpful? Give feedback.
-
|
So would it be possible only to publish |
Beta Was this translation helpful? Give feedback.
-
|
Probably, although that might introduce a delay in the behavior. It's strange that you're lights do that though. None of my lights seem to do this (including my Gledopto floodlights). |
Beta Was this translation helpful? Give feedback.
-
|
See update on the latest version I've released in the first post. |
Beta Was this translation helpful? Give feedback.
-
|
Thanks for your reply. I'm looking for a setting that doesn't turn on a light when I change the settings. It happens on the Z2M dashboard, so it's a Z2M problem rather than a HB-Z2M one. I'll dig around for a solution in the config then report back here so others can find it. |
Beta Was this translation helpful? Give feedback.
-
|
I'm not sure it's a problem with this version of Z2m, because it's the first time I use this plug in. I'm noticing that every time there is a change in the zigbee2MQTT platform like a new device or a change in a property in any added device. In HomeKit everything exposed by the plug in gets a "no response" and nothing works. I'm using the new architecture in HomeKit. |
Beta Was this translation helpful? Give feedback.
-
|
In this same version I added some code to pass along the availability information from Zigbee2MQTT to HomeKit (see #36 and #593). |
Beta Was this translation helpful? Give feedback.
-
|
I notice that if I reboot the plugin, the adaptive lighting setting in homebridge get unselect (like I had set to some other color on color selector). I can select the adaptive on after and starts working normally |
Beta Was this translation helpful? Give feedback.
-
|
But it's something new, because I believe it was working before. I stated to notice because when I go to the app to change the brightness the adaptive color is always unselected😏 |
Beta Was this translation helpful? Give feedback.
-
|
This logic itself didn't change. May I ask what are the brightness levels you are changing from/to? |
Beta Was this translation helpful? Give feedback.
-
|
Right now is from any brightness on the slider. If I select the adaptive one and change to any %, the color stops changing. |
Beta Was this translation helpful? Give feedback.
-
|
I also get this one when I reboot the plugin in home "bridge adaptive_lighting: disable due to large delta (15)" |
Beta Was this translation helpful? Give feedback.
-
|
If I make the light a group in zigbee2mqtt instead of grouping them in the home app, the large delta is not showing. The downside of using zigbee2mqtt is I lose the ability to control the individually. |
Beta Was this translation helpful? Give feedback.
-
|
Since 1-2 weeks I've also the problem, that the lights are switched between the color temperature randomly. Sometimes the lights are switched off and the log shows, they're switching color temperature (as they do this now): [3/24/2023, 5:01:21 PM] [homebridge-z2m] Publish to 'zigbee2mqtt/Pendelleuchte/set': '{"color_temp":228}' Is there something I can do to stop this? Thanks, |
Beta Was this translation helpful? Give feedback.
-
|
Is reporting for the lights working correctly? E.g. does Zigbee2MQTT post a message to the MQTT broker that the lights are off? Have you made any changes in the plugin configuration? |
Beta Was this translation helpful? Give feedback.
-
|
Hi, no changes in the configuration, sometimes this is happening, sometimes not. In the last days all light were working correctly. Strange behaviour... |
Beta Was this translation helpful? Give feedback.
-
|
It's been a while, but I think it's time to get to a state where we can go out of "beta" and have this in the regular release. From what I've gathered, the issue that quite some people still have with this implementation and something I think should be fixed before going out of "beta", is related to changing the brightness value. I think this issue can be resolved by resetting the reference value for the color temperature whenever the brightness is changed from either HomeKit or MQTT. |
Beta Was this translation helpful? Give feedback.
-
|
Hi, |
Beta Was this translation helpful? Give feedback.
-
|
To be honest, I simply haven't gotten any time to spend on this project. |
Beta Was this translation helpful? Give feedback.
-
|
Anyone is able to use it? I'm using homebridge-z2m v1.9.2 and with the following code installed on JSON Config My lights have temperature color too. Even that, no Adaptive Lightning options is being showed on Home app. I tried to remove and reinsert it again, no success. I have a HomePod and Apple TV acting as an hub. |
Beta Was this translation helpful? Give feedback.
-
|
Please read the first post in this discussion. You need a newer (beta) version for adaptive lighting. |
Beta Was this translation helpful? Give feedback.
-
|
Oh, I'm really sorry. I thought it was released to stable version. Installing it right now. |
Beta Was this translation helpful? Give feedback.
-
|
I have recently upgraded the Home architecture (which also locked out the other person from our Home) and now the 2 lights that support adaptive lightning sometimes get that feature turned off. There was no other change and it never happened before. |
Beta Was this translation helpful? Give feedback.
-
After quite a long wait, Adaptive Lighting was finally introduced in
v1.11.0-beta.0. Currently this version can be installed usingnpm i homebridge-z2m@next(or via the "Install Alternate Version" option in the Homebridge Config UI X web interface).For now, you will have to enable adaptive lighting manually by setting an option in the
lightconverter config, for example:{ "platform":"zigbee2mqtt", "defaults":{ "converters":{ "light":{ "adaptive_lighting":true } } }, "experimental":[ "COLOR_MODE" ] }Things that still need more testing:
COLOR_MODEexperimental feature is not turned on? The docs on theAdaptiveLightingControllermention that something like that is mandatory and it might still require more work.In general, it seems to work, but I'd love to get feedback on how well it works (as mentioned before).
As always, I do recommend users to make a backup of there HomeKit setup before updating Homebridge and/or its plugins.
You can use an app like Controller for HomeKit for this.
Update (2023-01-16)
Just released
v1.11.0-beta.2, which includes some small changes to adaptive lighting as well. Instead of setting a boolean value in the converter specific settings, you can also provide an object with some additional configuration:only_when_on: Only update the color temperature when the light is on. Defaults totrue.transition: Transition time to send along with the color temperature change when the light is on. If not defined,transitionwill not be send.Beta Was this translation helpful? Give feedback.
All reactions