slackrepo

#!/bin/bash
#-------------------------------------------------------------------------------
# slackrepo - Automated SlackBuilding from git repo into package repo,
#             for more details see /usr/doc/slackrepo-*/HOWTO
#
# Copyright 2014 David Spencer, Baildon, West Yorkshire, U.K.
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
#
#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#-------------------------------------------------------------------------------

function print_version
{
  echo "%PKGID%"
  return 0
}

#-------------------------------------------------------------------------------

function print_usage
{
  echo 'Usage:'
  echo "  $(basename "$0") build   [--control_args] [item...]"
  echo "  $(basename "$0") rebuild [--control_args] [item...]"
  echo "  $(basename "$0") update  [--control_args] [item...]"
  echo "  $(basename "$0") remove  [--control_args] item..."
  echo "  $(basename "$0") info    [--control_args]"
  echo 'Control args:'
  echo '  --repo=ID'
  echo '  --preview | --dry-run | --install'
  echo '  --debug (-d)'
  echo 'For the complete usage and list of control args, please see'
  echo '  man slackrepo'
  return 0
}

#-------------------------------------------------------------------------------

function exit_cleanup
# Cleanup everything and exit
# $1 = status to set on exit
# 0 completed ok
# 1 interrupted
# 2 bad usage
# 3 config not found
# 4 initialisation error
# 5 another instance is running
# 6 internal error
{
  stty sane   # in case we're killed waiting for the gpg passphrase
  [ "$1" = 1 ] && echo -e "\nInterrupted! Cleaning up ..." >/dev/tty
  if [ -n "$resmonpid" ]; then
    ${SUDO}/bin/kill -9 "$resmonpid" 2>/dev/null || true
    wait "$resmonpid" 2>/dev/null || true
  fi
  if [ -n "$DBUS_SESSION_BUS_PID" ]; then
    ${SUDO}/bin/kill -15 "$DBUS_SESSION_BUS_PID" 2>/dev/null || true
    sleep 1
  fi
  # unmount any chroot mounts, in reverse order
  for rev in $(seq $(( ${#CHRMOUNTS[@]} - 1)) -1 0); do
    ${SUDO}umount -l "${CHRMOUNTS[$rev]}" 2>/dev/null || true
  done
  # and MYTMP is possibly mounted too
  if [ -n "$MYTMP" ]; then
    ${SUDO}umount -l "$MYTMP" 2>/dev/null || true
    rmdir --ignore-fail-on-non-empty "$MYTMP"
  fi
  [ -n "$BIGTMP" ] && rm -rf "$BIGTMP"
  exit ${1:-0}
}

#-------------------------------------------------------------------------------

if [ $# = 0 ] || [ $# = 1 -a \( "$1" = '-?' -o "$1" = '-h' -o "$1" = '--help' -o "$1" = '-v' -o "$1" = '--version' \) ]; then
  print_version
  echo ""
  print_usage
  echo ""
  exit_cleanup 0
fi

starttime=$(date +%s)

#-------------------------------------------------------------------------------
# Command modes and options
#-------------------------------------------------------------------------------

# General rule:
# OPT_XXXX is the internal representation of command line option XXXX
# SR_XXXX is the internal representation of config file variable XXXX
# These are not documented. Users should set the XXXX variable (no prefix).
# But we can inherit OPT_ and SR_ variables for multi-repo support ;-)

# The command modes and options are extensible by adding more source files in
#   /usr/libexec/slackrepo/functions.d
# To define an extended command mode 'foo', add a function named foo_command
# To define an extended option '--bar', do OPTIONLIST+=( 'BAR' )

# Initialise OPTIONLIST first so that any extended options are at the end
OPTIONLIST=( 'REPO' 'VERBOSE' 'VERY_VERBOSE' 'NOWARNING' \
  'PREVIEW' 'DRY_RUN' 'INSTALL' 'LINT' 'KEEP_TMP' 'CHROOT' 'COLOR' 'NICE' 'REPRODUCIBLE' )

# Get the support functions
LIBEXECDIR="/usr/libexec/$(basename "$0")"
for f in "${LIBEXECDIR}"/functions.d/*.sh; do
  if [ -x "$f" ]; then
    . "$f"
  fi
done

# Initialise all the undefined options to null, set -u friendly ;-)
for opt in "${OPTIONLIST[@]}" ; do
  optopt="OPT_$opt"
  [ "${!optopt-unset}" = 'unset' ] && [ -z "${!optopt}" ] && eval "$optopt"=''
done
# Initialise OPT_REPO from env var $REPO
OPT_REPO="${OPT_REPO:-$REPO}"
# Default for OPT_COLOR
OPT_COLOR="${OPT_COLOR:-auto}"
# Default for OPT_NICE
OPT_NICE="${OPT_NICE:-5}"
# No default for the command (build/rebuild/update/remove/...):
CMD=''

while [ $# != 0 ]; do
  case "$1" in
    # we'll accept add/build/rebuild/update/remove/revert with or without '--'
    build | --build | add | --add )
      [ -n "$CMD" ] && { print_usage; exit_cleanup 2; }
      CMD='build'
      shift; continue ;;
    rebuild | --rebuild )
      [ -n "$CMD" ] && { print_usage; exit_cleanup 2; }
      CMD='rebuild'
      shift; continue ;;
    update | --update )
      [ -n "$CMD" ] && { print_usage; exit_cleanup 2; }
      CMD='update'
      shift; continue ;;
    install )
      [ -n "$CMD" ] && { print_usage; exit_cleanup 2; }
      # transform the 'install' command into 'build --install'
      CMD='build'
      OPT_INSTALL='y'
      shift; continue ;;
    remove | --remove )
      [ -n "$CMD" ] && { print_usage; exit_cleanup 2; }
      CMD='remove'
      shift; continue ;;
    revert | --revert | restore | --restore )
      [ -n "$CMD" ] && { print_usage; exit_cleanup 2; }
      CMD='revert'
      shift; continue ;;
    --repo=* )
      OPT_REPO="${1/--repo=/}"
      shift; continue ;;
    --verbose | -v )
      [ "$OPT_VERBOSE" = 'y' ] && OPT_VERY_VERBOSE='y'
      OPT_VERBOSE='y'
      shift; continue ;;
    --very-verbose | -vv )
      OPT_VERY_VERBOSE='y'
      shift; continue ;;
    --debug | -d )
      OPT_VERY_VERBOSE='y'
      OPT_DRY_RUN='y'
      OPT_LINT='y'
      OPT_KEEP_TMP='y'
      shift; continue ;;
    --color=* | --colour=* )
      OPT_COLOR="${1/--colo*r=/}"
      shift; continue ;;
    --nowarning=* | --nowarnings=* )
      OPT_NOWARNING="${1/--nowarning*=/}"
      [ "${OPT_NOWARNING}" = '' ] && OPT_NOWARNING='.*'
      shift; continue ;;
    -* )
      found='n'
      for opt in "${OPTIONLIST[@]}"; do
        arg=$(echo "$opt" | tr '_' '-' | tr '[:upper:]' '[:lower:]')
        if [ "$1" = "--${arg}" ] || [ "$1" = "--${arg}=yes" ] || [ "$1" = "--${arg}=y" ]; then
          eval OPT_"${opt}"='y'
          found='y'; break
        elif [ "$1" = "--no-${arg}" ] || [ "$1" = "--${arg}=no" ] || [ "$1" = "--${arg}=n" ] || [ "$1" = "--${arg}=none" ]; then
          eval OPT_"${opt}"='n'
          found='y'; break
        elif [ "${1/=*/=}" = "--${arg}=" ]; then
          eval OPT_"${opt}"="${1#*=}"
          found='y'; break
        fi
      done
      [ "$found" = 'n' ] && { echo "$(basename "$0"): Error: invalid control argument: $1" >&2; exit_cleanup 2; }
      shift; continue ;;
    * )
      if [ "$(type -t "${1}_command")" = 'function' ]; then
        [ -n "$CMD" ] && { print_usage; exit_cleanup 2; }
        CMD="$1"
        shift; continue
      else
        break
      fi
      ;;
  esac
done

if [ -z "$CMD" ]; then
  print_usage
  exit_cleanup 2
elif [ $# = 0 ]; then
  if [ "$CMD" = 'remove' ]; then
    echo "Usage: $(basename "$0") remove [--repo=ID] item..."
    echo "(you must specify the items to be removed)"
    exit_cleanup 2
  elif [ "$CMD" = 'revert' ] ; then
    echo "Usage: $(basename "$0") revert [--repo=ID] item..."
    echo "(you must specify the items to be reverted)"
    exit_cleanup 2
  fi
fi

#-------------------------------------------------------------------------------
# Startup
#-------------------------------------------------------------------------------

if [ "$EUID" != 0 ]; then
  if [ ! -x /usr/bin/fakeroot ]; then
    echo "$(basename "$0"): Running as non-root user, but fakeroot is not installed."
    echo "$(basename "$0"): You should either install fakeroot or run slackrepo as root."
    exit_cleanup 4
  elif ! sudo -v >/dev/null 2>&1; then
    echo "$(basename "$0"): Running as non-root user, but sudo is not configured."
    echo "$(basename "$0"): You need to edit /etc/sudoers.d/slackrepo."
    exit_cleanup 4
  fi
  SUDO="/usr/bin/sudo "
  export PATH="${LIBEXECDIR}:/usr/local/sbin:/usr/sbin:/sbin:$PATH"
else
  SUDO=''
  export PATH="${LIBEXECDIR}:$PATH"
fi

# If there is no existing dbus session instance for root, create one.  We need
# to have a dbus session instance for root outside the chroot, to prevent
# commands like gconftool-2 (in doinst.sh) launching a dbus in the chroot that
# would persist after chroot exits and stop us unmounting the overlay (*BIG SIGH*)
if [ -z "$DBUS_SESSION_BUS_ADDRESS" ]; then
  dbuscrap="$(DISPLAY='' ${SUDO}dbus-launch --sh-syntax 2>/dev/null)"
  eval "${dbuscrap}"
fi

# Ensure ctrl-c (etc) exits the whole thing, not just a random subshell
trap "exit_cleanup 1" SIGINT SIGQUIT SIGTERM

#-------------------------------------------------------------------------------
# Configuration
#-------------------------------------------------------------------------------

# Find out about the host system.
if [ -f /etc/os-release ]; then
  # Lennart is my copilot <3
  . /etc/os-release
  SYS_OSNAME="${ID:-linux}"
  SYS_OSVER="${VERSION_ID:-}"
elif [ -f /etc/slackware-version ]; then
  SYS_OSNAME='slackware'
  SYS_OSVER="$(sed 's/^Slackware //' /etc/slackware-version)"
else
  echo "$(basename "$0"): Error: /etc/slackware-version not found"
  exit_cleanup 4
fi
SYS_KERNEL=$(uname -r)
SYS_ARCH=$(uname -m)
SYS_MULTILIB='n'
[ "$SYS_ARCH" = 'x86_64' ] && [ -f /etc/profile.d/32dev.sh ] && SYS_MULTILIB='y'
SYS_NPROC=$(nproc)
[ -f /proc/cpuinfo ] && SYS_MHz=$(awk '/^cpu MHz/ {sum+=$4} END {print sum}' < /proc/cpuinfo)
# If that's jiggered (stupid Pi kernels), try this. Then give up like W.C. Fields said.
[ -z "$SYS_MHz" ] && [ -f /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq ] && \
  SYS_MHz=$(cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq | sed 's/...$//')
SYS_OVERLAYFS='n'
# don't look at the kernel version -- somebody might have the old patchset,
# or we might be in something like an OpenVZ instance
if \
  [ -d /sys/module/overlay ] || \
  [ -f /lib/modules/"$(uname -r)"/kernel/fs/overlayfs/overlay.ko ] || \
  grep -q overlay /proc/filesystems
then
  SYS_OVERLAYFS='y'
fi
# Detect current
SYS_CURRENT='n'
if [ -f /var/lib/slackpkg/ChangeLog.txt ] && ! grep -q "${SYS_OSVER}.*is released" /var/lib/slackpkg/ChangeLog.txt; then
  # we must be in-between updating aaa_base and the real release
  SYS_CURRENT='y'
elif [ "${SYS_OSNAME}${SYS_OSVER}" = "slackware14.2" ]; then
  # file-5.25 was the first package superseded in this cycle of current
  for filefile in /var/log/packages/file-5.25-*-1; do
    if [ ! -f "$filefile" ]; then
      SYS_CURRENT='y'
      break
    fi
  done
# else we're not going to support someone stuck in a 14.1 cycle timewarp
fi

# Next, do the config variables.
# These config vars are prefixed with SR_ to stop SlackBuilds picking them up.
# However, they do NOT have the SR_ prefix in the config files or environment.
varnames="SBREPO SRCREPO PKGREPO PKGBACKUP \
          HINTDIR DEFAULT_HINTDIR LOGDIR DATABASE TMP \
          ARCH TAG PKGTYPE NUMJOBS"
# These config vars don't need to be obfuscated:
genrepnames="USE_GENREPOS REPOSROOT REPOSOWNER REPOSOWNERGPG DL_URL \
             RSS_TITLE RSS_ICON RSS_LINK RSS_CLURL RSS_DESCRIPTION RSS_FEEDMAX RSS_UUID \
             GPGBIN USE_GPGAGENT FOR_SLAPTGET FOLLOW_SYMLINKS REPO_SUBDIRS REPO_EXCLUDES"
initnames="INIT_GITCLONE INIT_GITBRANCH"
# Initialise the SR_variables from the environment:
for envvar in $varnames $genrepnames $initnames "${OPTIONLIST[@]}" ; do
  srvar="SR_$envvar"
  eval "$srvar=\"${!envvar}\""
done

# Per-user config files:
userconf=~/.slackreporc
genrepconf=~/.genreprc
# Read the user config file to get $REPO:
if [ -f "$userconf" ]; then
  . "$userconf"
fi

# If we didn't get a repo id from env or cmd line, drop $REPO from the user config file into $OPT_REPO:
if [ -z "$OPT_REPO" ]; then
  if [ "$SYS_CURRENT" = "y" ]; then
    OPT_REPO="${REPO:-ponce}"
  else
    OPT_REPO="${REPO:-SBo}"
  fi
fi
# Read the main repo config file, overriding anything that came from the user config file:
repoconf="${CONFIGDIR:-/etc/slackrepo}/slackrepo_${OPT_REPO}.conf"
if [ -f "$repoconf" ]; then
  . "$repoconf"
else
  echo "$(basename "$0"): Error: No repo '${OPT_REPO}' (configuration file not found: $repoconf)" >&2; exit_cleanup 3
fi
# Read the user config files to override everything in the main repo config file.
# (Yes, we're reading ~/.slackreporc twice, but that's a lot easier than a proper solution)
for conf in "$userconf" "$genrepconf"; do
  if [ -f "$conf" ]; then
    . "$conf"
  fi
done

# Save the LINT config variable, we need it as a default for '--lint=y' or '--lint'
# (see below!)
LINT_DEFAULTS="$LINT"

# Backfill the SR_ variables from config file variables,
# and unset the config file variables to prevent SlackBuilds from seeing them:
for name in $varnames $genrepnames $initnames; do
  srvar="SR_$name"
  [ -z "${!srvar}" ] && eval "$srvar=\"${!name}\""
  eval unset "$name"
done
# and do something similar for the OPT_ variables:
for name in "${OPTIONLIST[@]}" ; do
  optvar="OPT_$name"
  [ -z "${!optvar}" ] && eval "$optvar=\"${!name}\""
  eval unset "$name"
  # simplify anything that looks like a Boolean:
  if   [ "${!optvar}" = '1' ] || [ "${!optvar}" = 'yes' ] || [ "${!optvar}" = 'y' ] || [ "${!optvar}" = 'YES' ] || [ "${!optvar}" = 'Y' ]; then
    eval "$optvar"='y'
  elif [ "${!optvar}" = '0' ] || [ "${!optvar}" = 'no'  ] || [ "${!optvar}" = 'n' ] || [ "${!optvar}" = 'NO'  ] || [ "${!optvar}" = 'N' ] || [ "${!optvar}" = 'none' ] || [ "${!optvar}" = '' ]; then
    eval "$optvar"='n'
  fi
done

# Resolve conflicting options:
# --very-verbose implies --verbose
[ "$OPT_VERY_VERBOSE" = 'y' ] && OPT_VERBOSE='y'
# --preview or --dry-run overrides --install
[ "$OPT_PREVIEW" = 'y' ] && OPT_INSTALL='n'
[ "$OPT_DRY_RUN" = 'y' ] && OPT_INSTALL='n'
# lazy implementation of --very-verbose ;-)
[ "$OPT_VERY_VERBOSE" = 'y' ] && export VERBOSE=1 V=1
# compatibility fix, OPT_CHROOT is now a pathname or 'n'
[ "$OPT_CHROOT" = 'y' ] && OPT_CHROOT='/'
# chroot will only work if overlayfs is available
[ "$SYS_OVERLAYFS" != 'y' ] && OPT_CHROOT='n'
# accept null niceness, map to zero
[ -z "$OPT_NICE" ] && OPT_NICE='0'
# fixup NOWARNING (if you really want the regex to match 'n', see a doctor)
[ "$OPT_NOWARNING" = 'n' ] && OPT_NOWARNING=''

# Set up the OPT_LINT_* suboptions. This is horrible, sorry.
LINT_ALL="sb,dl,x,net,pkg,inst"
[ "${LINT_DEFAULTS}" = 'y' ] && LINT_DEFAULTS="${LINT_ALL}"
# start by turning them all off
for vopt in $(echo "${LINT_ALL}" | sed 's/,/ /g'); do
  eval OPT_LINT_"${vopt^^}"='n'
done
# handle yes/no/etc
case "${OPT_LINT}" in
  y|yes|1)      OPT_LINT="${LINT_DEFAULTS}" ;;
  a|all)        OPT_LINT="${LINT_ALL}" ;;
  n|none|''|0)  OPT_LINT="n" ;;
  *)            : ;;
esac
# turn them on individually
if [ "$OPT_LINT" != 'n' ]; then
  foundopts=''
  for uopt in $(echo "$OPT_LINT" | sed 's/,/ /g'); do
    found='n'
    for vopt in $(echo "${LINT_ALL}" | sed 's/,/ /g'); do
      if [ "$uopt" = "$vopt" ]; then
        found='y'
        foundopts="${foundopts}${vopt},"
        eval OPT_LINT_"${vopt^^}"='y'
        break
      fi
    done
    [ "$found" = 'n' ] && echo "$(basename "$0"): lint option not valid: $uopt" >&2
  done
  OPT_LINT="${foundopts%%,}"
fi

# Set up the dependency substitutions in SUBST
declare -A SUBST
if [ -n "$SR_SUBSTITUTE" ]; then
  for sub in $(echo $(echo $SR_SUBSTITUTE | sed -e 's/,/ /g') | sed -e 's/ *=> */=>/g') ; do
    depdel="${sub/=>*/}"
    depadd="${sub/*=>/}"
    [ "${depdel:0:1}" = '!' ] && depadd='!'
    [ -z "$depadd" ] && depadd='!'
    SUBST[${depdel##!}]="$depadd"
  done
fi

# If SR_NUMJOBS or SR_ARCH not set, work them out and set them explicitly
if [ -z "$SR_NUMJOBS" ]; then
  SR_NUMJOBS="-j$(( SYS_NPROC * 2 )) -l$(( SYS_NPROC + 1 ))"
fi
# setting ARCH breaks lots of SlackBuilds, which is why we do it ;-)
if [ -z "$SR_ARCH" ] || [ "$SR_ARCH" = '%ARCH%' ]; then
  case "$SYS_ARCH" in
    i?86) if [ "$SYS_OSVER" = '14.1' ]; then
            SR_ARCH='i486'
          else
            SR_ARCH='i586'
          fi
          ;;
    arm*) SR_ARCH='arm' ;;
       *) SR_ARCH="$SYS_ARCH" ;;
  esac
fi

# Substitute %REPO%, %SLACKVER% and %ARCH%
for name in $varnames $genrepnames $initnames; do
  srvar="SR_$name"
  eval "$srvar=\"$(echo "${!srvar}" | sed -e "s/%REPO%/$OPT_REPO/g" -e "s/%SLACKVER%/$SYS_OSVER/g" -e "s/%ARCH%/$SR_ARCH/g")\""
done
for name in OPT_CHROOT; do
  eval "$name=\"$(echo "${!name}" | sed -e "s/%REPO%/$OPT_REPO/g" -e "s/%SLACKVER%/$SYS_OSVER/g" -e "s/%ARCH%/$SR_ARCH/g")\""
done

#-------------------------------------------------------------------------------

# Run the 'info' command right now.
# It's completely passive, we don't want to initialise the repo.
[ "${CMD}" = 'info' ] && { info_command; exit_cleanup 0; }

#-------------------------------------------------------------------------------
# Initialisation
#-------------------------------------------------------------------------------

# Setup locking and logging:
LOCKFILE="$(dirname "$SR_SBREPO")/.lock"
if ! mkdir -p "$(dirname "$LOCKFILE")"; then
  echo "$(basename "$0"): Failed to create repository root directory: $(dirname "$LOCKFILE")" >&2
  [ "$EUID" != 0 ] && echo "You're not root, you need to set SBREPO to a writable directory." >&2
  exit_cleanup 4
fi
if ! touch "$LOCKFILE"; then
  echo "$(basename "$0"): Failed to create lock file: $LOCKFILE" >&2
  [ "$EUID" != 0 ] && echo "You're not root, you need to set SBREPO to a writable directory." >&2
  exit_cleanup 4
fi
if ! mkdir -p "$SR_LOGDIR"; then
  echo "$(basename "$0"): Failed to create log directory: $SR_LOGDIR" >&2
  [ "$EUID" != 0 ] && echo "You're not root, you need to set LOGDIR to a writable directory." >&2
  exit_cleanup 4
fi
MAINLOG="$SR_LOGDIR"/$(basename "$0")_$(date '+%F_%T').log
init_colour
if [ "$DOCOLOUR" = 'y' ]; then
  exec 40>"$LOCKFILE" 41>&1 &> >( tee >(sed -u -e 's/\x1b\[[0-9?;]*[]a-zA-Z]//g' -e 's/\x9b[0-9?;]*[]a-zA-Z]//g' -e 's/\x1b[()].//' -e 's/\x0e//g' -e 's/\x0f//g' >"$MAINLOG") )
else
  exec 40>"$LOCKFILE" 41>&1 &> >( tee "$MAINLOG" )
fi
flock -x --nb 40
if [ $? != 0 ]; then
  echo "$(basename "$0"): Repository ${OPT_REPO} is locked by another process." >&2
  exit_cleanup 5
fi

# Arrays for tracking outcomes:
declare -a OKLIST WARNINGLIST SKIPPEDLIST FAILEDLIST ABORTEDLIST

# Validate $OPT_CHROOT:
if [ "$OPT_CHROOT" != 'n' ]; then
  if [ ! -d "$OPT_CHROOT" ]; then
    log_error "chroot is not a directory: $OPT_CHROOT"; exit_cleanup 4
  elif [ ! -x "$OPT_CHROOT"/bin/bash ]; then
    log_error "Not a usable chroot: $OPT_CHROOT"; exit_cleanup 4
  else
    OPT_CHROOT=$(realpath "$OPT_CHROOT")
  fi
fi

# Create directories:
[ -d "$SR_SBREPO" ]   || \
  { log_normal "Creating SlackBuild repository: $SR_SBREPO" ; mkdir -p "$SR_SBREPO"    || \
  { log_error "Failed to create repository"; exit_cleanup 4; }; }
[ -d "$SR_SRCREPO" ]  || \
  { log_normal "Creating source repository: $SR_SRCREPO"    ; mkdir -p "$SR_SRCREPO"   || \
  { log_error "Failed to create repository"; exit_cleanup 4; }; }
[ -d "$SR_PKGREPO" ]  || \
  { log_normal "Creating package repository: $SR_PKGREPO"   ; mkdir -p "$SR_PKGREPO"   || \
  { log_error "Failed to create repository"; exit_cleanup 4; }; }
[ -z "$SR_PKGBACKUP" ] || [ -d "$SR_PKGBACKUP" ] || \
  { log_normal "Creating backup repository: $SR_PKGBACKUP"  ; mkdir -p "$SR_PKGBACKUP" || \
  { log_error "Failed to create repository"; exit_cleanup 4; }; }
[ -d "$SR_HINTDIR" ]  || \
  { log_normal "Creating hintfile directory: $SR_HINTDIR"   ; mkdir -p "$SR_HINTDIR"   || \
  { log_error "Failed to create directory";  exit_cleanup 4; }; }

# sqlite database for revision details, package identification, build times etc
# This is now *required* so here is a default path:
[ -n "$SR_DATABASE" ] || SR_DATABASE="$(dirname "$SR_SBREPO")/database_${OPT_REPO}.sqlite3"
db_init || { log_error "Failed to initialise database"; exit_cleanup 4; }

# Temporary directory:
SR_TMP=${SR_TMP:-/tmp/SBo}
# really really don't want the next bit to go badly ;-)
if [ -n "$SR_TMP" ] && [ -d "$SR_TMP" ]; then
  log_normal "Cleaning $SR_TMP ... "
  find "${SR_TMP:?NotSetSR_TMP}" -mindepth 1 -maxdepth 1 -exec ${SUDO}rm -rf {} \;
  log_done
fi
mkdir -p "$SR_TMP" || { log_error "Failed to create $SR_TMP"; exit_cleanup 4; }
[ -n "$SUDO" ] && ${SUDO}chown "$USER" "$SR_TMP"

# We need a slackrepo-specific temporary directory, for small stuff only
MYTMP=$(mktemp -t -d slackrepo.XXXXXX) || { log_error "Failed to create temporary directory"; exit_cleanup 4; }
# Mount a tmpfs on MYTMP: (1) it's fast, (2) we might already be in an overlay,
# and you can't have upperdir or workdir on an overlay
${SUDO}mount -t tmpfs -o defaults,mode=1777 tmpfs "$MYTMP" || { log_error "Failed to mount $MYTMP"; exit_cleanup 4; }

# We need a temporary directory for big stuff too
BIGTMP=$(mktemp -t -p "$SR_TMP" -d slackrepo.XXXXXX) || { log_error "Failed to create directory in $SR_TMP"; exit_cleanup 4; }

#### Probably should make --keep-tmp force $TMP into $MYTMP

# Disposable package repository for dry run:
if [ "$OPT_DRY_RUN" = 'y' ]; then
  TMP_DRYREPO="$BIGTMP"/dryrun-packages
  rm -rf "$TMP_DRYREPO"
  mkdir -p "$TMP_DRYREPO"
fi

#-------------------------------------------------------------------------------

# We will use $SR_SBREPO as the working directory; it simplifies lots of git stuff.
cd "$SR_SBREPO" || { log_error "Failed to access SlackBuilds repository"; exit_cleanup 4; }

#-------------------------------------------------------------------------------

# We used to check whether this is a git repo with...
# if [ "$(git rev-parse --is-inside-work-tree 2>/dev/null)" = "true" ]; then
# ... but it's painfully slow, so instead we'll just do this:
GOTGIT=n
[ -d "$SR_SBREPO/.git" ] && GOTGIT='y'

# git: initialise, or check and update
if [ -z "$(ls "$SR_SBREPO" 2>/dev/null)" ]; then
  if [ -n "${SR_INIT_GITCLONE}" ]; then
    log_normal "Cloning SlackBuilds repository $SR_SBREPO from ${SR_INIT_GITCLONE}."
    git clone "${SR_INIT_GITCLONE}" "$SR_SBREPO" || \
      { log_error "Failed to clone from ${SR_INIT_GITCLONE}"; exit_cleanup 4; }
    git fetch -a
    git remote update
    mybranch="${SR_INIT_GITBRANCH:-${SYS_OSVER:-master}}"
    if [ "$(git rev-parse --abbrev-ref HEAD)" != "$mybranch" ]; then
      git checkout -b "$mybranch" -t origin/"$mybranch"
    fi
    db_set_misc "git_fetch_${SR_INIT_GITBRANCH}" "$(date +%s)"
    log_normal "Finished cloning SlackBuilds repository."
    GOTGIT='y'
  fi
fi

# Run the start hooks here, probably including gitfetch_hook
run_hooks start

# Index the slackbuilds, for speed
sbindexed="$(db_get_misc "indexed_slackbuilds")"
[ "$GOTGIT" = 'y' ] && gitdate="$(git log -n 1 --format=%ct)"
if [ "$GOTGIT" = 'n' ] || [ -n "$muck" ] || [ "${sbindexed:-0}" != "$gitdate" ]; then
  log_normal "Indexing SlackBuilds ... "
  db_index_slackbuilds
  if [ "$GOTGIT" = 'n' ] || [ -n "$muck" ]; then
    db_set_misc "indexed_slackbuilds" "$(date +%s)"
  else
    db_set_misc "indexed_slackbuilds" "$gitdate"
  fi
  log_done
fi

# Show some info about the repo
if [ "$GOTGIT" = 'y' ]; then
  [ -n "$(git status -s .)" ] && dirty=' (DIRTY)'
  log_info "git repo: $SR_SBREPO"
  log_info "branch:   $(git rev-parse --abbrev-ref HEAD)"
  log_info "date:     $(date --date=@${gitdate})"
  log_info "revision: $(git rev-parse HEAD)$dirty"
  log_info "title:    $(git log -n 1 --format=%s)"
else
  log_info "SlackBuild repo: $SR_SBREPO (not git)"
fi

# Changelog:
CHANGELOG="$SR_PKGREPO"/.changelog
if [ -s "$CHANGELOG" ]; then
  log_important "Continuing changelog from previous run."
else
  mkdir -p "$(dirname "$CHANGELOG")"
  true > "$CHANGELOG"
fi

declare -A KEEPINSTALLED
# Warn about already installed packages (using package tag)
if [ -n "$SR_TAG" ] && [ "$OPT_INSTALL" != 'y' ] && [ "$CMD" != 'remove' ]; then
  for pkg in /var/log/packages/*"$SR_TAG"; do
    if [ -f "$pkg" ]; then
      pkgid="${pkg##*/}"
      [ "${#KEEPINSTALLED[@]}" = 0 ] && log_warning -s "Packages with tag $SR_TAG are already installed"
      log_normal "  $pkgid"
      KEEPINSTALLED[${pkgid%-*-*-*}]="$pkgid"
    fi
  done
fi

log_normal ""

#-------------------------------------------------------------------------------
# Main loop
#-------------------------------------------------------------------------------

if [ $# = 0 ]; then
  # no args => process everything
  set -- '*'
fi

while [ $# != 0 ]; do
  arg="$1"
  shift
  [ "$arg" = '*' ] && log_normal "Calculating list of items to process ... "
  parse_arg "$arg"
  [ "$arg" = '*' ] && log_done && log_normal ""
  # Note that we set the variable $ITEMID (upper case) so that other functions
  # called recursively (which get $itemid as an argument) can test whether they
  # are dealing with the top level item.
  for ITEMID in "${PARSEDARGS[@]}"; do
    log_start "$ITEMID"
    # Commands are extensible, just put a script defining CMD_command() into functions.d/
    cmdfunction="${CMD}_command"
    if [ "$(type -t "$cmdfunction")" = 'function' ]; then
      eval "${CMD}_command" "$ITEMID"
    else
      log_error "$(basename "$0"): Unrecognised CMD = $CMD"
      exit_cleanup 6
    fi
  done
done

#-------------------------------------------------------------------------------
# Print a summary of what happened
#-------------------------------------------------------------------------------

log_start "SUMMARY"
log_normal "Logfile:     $MAINLOG"
secs=$(( $(date +%s) - starttime ))
h=$(( secs / 3600 )); m=$(( ( secs / 60) % 60 )); s=$(( secs % 60 ))
log_normal "Runtime:     ${h}h ${m}m ${s}s"

if [ "$OPT_PREVIEW" = 'y' ]; then
  knownitems=( ${!STATUSINFO[@]} )
  PENDINGLIST=()
  totalbuildsecs=60  # always estimate at least 1 min ;-)
  unknownbuildsecs=0
  for i in ${knownitems[@]}; do
    case "${STATUS[$i]}" in
      ok|updated|skipped|unsupported|aborted)
        : ;;
      *)
        PENDINGLIST+=( "$(printf '%s (%s)\n' "$i" "${STATUSINFO[$i]}")" )
        estbuildsecs=''
        read -r prevsecs prevmhz guessflag < <(db_get_buildsecs "$i")
        if [ -n "$prevsecs" ] && [ -n "$prevmhz" ] && [ -n "$SYS_MHz" ]; then
          estbuildsecs=$(echo "scale=3; ${prevsecs}*${prevmhz}/${SYS_MHz}+1" | bc | sed 's/\..*//')
        fi
        if [ -z "$estbuildsecs" ]; then
          unknownbuildsecs=$(( unknownbuildsecs + 1 ))
        else
          totalbuildsecs=$(( totalbuildsecs + estbuildsecs ))
        fi
        ;;
    esac
  done
  pendingcount="${#PENDINGLIST[@]}"
  if [ "$pendingcount" != 0 ]; then
    log_normal "Pending:     $pendingcount"
    log_info "$(printf '  %s\n' "${PENDINGLIST[@]}" | sort)"
    ((hr=${totalbuildsecs}/3600))
    ((mn=(${totalbuildsecs}%3600)/60))
    if [ "$unknownbuildsecs" = 0 ]; then
      log_normal "Estimated build time ${hr}h ${mn}m"
    else
      log_normal "Estimated build time ${hr}h ${mn}m (+ $unknownbuildsecs unknown)"
    fi
  fi
elif [ "$OPT_DRY_RUN" = 'y' ]; then
  OKLIST=( $(printf '%s\n' "${OKLIST[@]}" | sort -u) )
  okcount="${#OKLIST[@]}"
  if [ "$okcount" != 0 ]; then
    log_normal "Dry run OK:  $okcount"
    log_info "$(printf '  %s\n' "${OKLIST[@]}")"
  fi
else
  if [ "$CMD" = 'build' ] || [ "$CMD" = 'rebuild' ] || [ "$CMD" = 'update' ]; then
    addedcount=$(grep -c ': Added'   "$CHANGELOG")
    if [ "$addedcount" != 0 ]; then
      log_normal "Added:       $addedcount"
      log_info "$(grep ': Added'    "$CHANGELOG" | sed -e 's/^/  /' -e 's/:.*//' | sort)"
    fi
    updatedcount=$(grep -c ': Updated' "$CHANGELOG")
    if [ "$updatedcount" != 0 ]; then
      log_normal "Updated:     $updatedcount"
      log_info "$(grep ': Updated'  "$CHANGELOG" | sed -e 's/^/  /' -e 's/:.*//' | sort)"
    fi
    rebuiltcount=$(grep -c ': Rebuilt' "$CHANGELOG")
    if [ "$rebuiltcount" != 0 ]; then
      log_normal "Rebuilt:     $rebuiltcount"
      log_info "$(grep ': Rebuilt'  "$CHANGELOG" | sed -e 's/^/  /' -e 's/:.*//' | sort)"
    fi
  fi
  if [ "$CMD" = 'update' ] || [ "$CMD" = 'remove' ]; then
    log_normal "Removed:     $(grep -c ': Removed' "$CHANGELOG")"
    log_info "$(grep ': Removed'  "$CHANGELOG" | sed -e 's/^/  /' -e 's/:.*//' | sort)"
  fi
  if [ "$CMD" = 'revert' ]; then
    log_normal "Reverted:    $(grep -c ': Reverted' "$CHANGELOG")"
    log_info "$(grep ': Reverted' "$CHANGELOG" | sed -e 's/^/  /' -e 's/:.*//' | sort)"
  fi
fi

SKIPPEDLIST=( $(printf '%s\n' "${SKIPPEDLIST[@]}" | sort -u) )
skippedcount="${#SKIPPEDLIST[@]}"
if [ "$skippedcount" != 0 ]; then
  log_normal "Skipped:     $skippedcount"
  log_info "$(printf '  %s\n' "${SKIPPEDLIST[@]}")"
fi
UNSUPPORTEDLIST=( $(printf '%s\n' "${UNSUPPORTEDLIST[@]}" | sort -u) )
unsupportedcount="${#UNSUPPORTEDLIST[@]}"
if [ "$unsupportedcount" != 0 ]; then
  log_normal "Unsupported: $unsupportedcount"
  log_info "$(printf '  %s\n' "${UNSUPPORTEDLIST[@]}")"
fi
FAILEDLIST=( $(printf '%s\n' "${FAILEDLIST[@]}" | sort -u) )
failedcount="${#FAILEDLIST[@]}"
if [ "$failedcount" != 0 ]; then
  log_normal "Failed:      $failedcount"
  log_info "$(printf '  %s\n' "${FAILEDLIST[@]}")"
fi
ABORTEDLIST=( $(printf '%s\n' "${ABORTEDLIST[@]}" | sort -u) )
abortedcount="${#ABORTEDLIST[@]}"
if [ "$abortedcount" != 0 ]; then
  log_normal "Aborted:     $abortedcount"
  log_info "$(printf '  %s\n' "${ABORTEDLIST[@]}")"
fi
# Don't bother enumerating 'bad' items (not found, etc)
uniquewarnings=()
[ "${#WARNINGLIST[@]}" != 0 ] && while read -r warning; do uniquewarnings+=( "$warning" ); done < <(printf '%s\n' "${WARNINGLIST[@]}" | sort -u )
warningcount="${#uniquewarnings[@]}"
if [ "$warningcount" != 0 ]; then
  log_normal "Warnings:    $warningcount"
  log_info "$(printf '  %s\n' "${uniquewarnings[@]}")"
fi

#-------------------------------------------------------------------------------
# Run the finish hooks, probably including gen_repos_files.sh

# Hooks can prevent removal of the changelog by setting $changelogstat nonzero.
# (The changelog is for gen_repos_files.sh, and if gen_repos_files.sh fails e.g.
# because of signing problems, we want to keep the changelog. But if the genrepos
# hook isn't being run, we want to remove the changelog.)
changelogstat=0

run_hooks finish

[ "$changelogstat" = 0 ] && rm -f "$CHANGELOG"

#-------------------------------------------------------------------------------

log_normal ""
exit_cleanup 0