- Updated go version 1.20 -> 1.21
- Bump kaniko (used to build Docker images in GCB) to 1.20.0
Support for skipping subtree revisions to increase read performance and reduce disk usage: added in #3201
TL;DR: existing trees will continue to be stored and queried as they were before, but new trees created with the MySQL storage layer will be stored and queried in a way that uses less space and allows for simpler and faster queries. No schema changes are required by log operators.
The Trillian MySQL implementation stores the internal state of the log as Subtrees in the database. These are essentially tiles as described by tlog: Tiling a log. Trees created with previous versions of Trillian stored a different revision of each Subtree when the tree was updated. This is somewhat redundant for append-only logs because an earlier version of a Subtree can always be derived from a later one by simply removing entries from the right of the Subtree. PR #3201 removes this Subtree revision history, and updates Subtrees in place when they are updated.
Measurements from @n-canter show that revisionless storage saves around 75% storage costs for the Subtree table, and queries over this table are more than 15% faster.
The same schema is used for both revisioned and unrevisioned subtrees. The difference is that we always write a revision of 0 in the unrevisioned case, which still means that there will only be a single entry per subtree.
Support is maintained for the old way of revisioning Subtrees in order to avoid breaking changes to existing trees. There is no simple code change that would safely allow a previously revisioned tree to start becoming a revisionless tree. This new revisionless Subtree feature is only available for trees created with new versions of Trillian.
Users with legacy revisioned trees that wish to take advantage of smaller storage costs and faster queries of the new revisionless storage should come speak to us on transparency-dev Slack. The safest option we have available is to use migrillian to create a new copy of trees, but this will be quite a manual process and will only work for CT logs. Other migration options are conceivable and we're eager to work with the community to develop and test tools for upgrading trees in place.
- CI now runs with MySQL 8.2 instead of MySQL 5.7
- Bump golangci-lint from 1.51.1 to 1.55.1 (developers should update to this version)
- Strip unused docker image manipulation from cloudbuild by @mhutchinson in #3278
- Switch from using unmaintained Google Cloud mysql db image to dockerhub official image by @patflynn in #3272
- Disable the OS package patches to bypass the mysql8 gpg key rotation issue by @roger2hk in #3270
- Disable race condition checking for beam code by @mhutchinson in #3249
- Make uninitializedBegin test accurately test its intention by @mhutchinson in #3244
- Fix deadlock in log_client by @n-canter in #3236
- Bump go-version-input from 1.20.11 to 1.20.12 in govulncheck.yml by @roger2hk in #3237
- Inlined storage/sql.go into both implementations that use it by @mhutchinson in #3235
- Support for skipping subtree revisions to increase read performance and reduce disk usage by @mhutchinson in #3201
- Updated Slack channel details by @mhutchinson in #3214
- Skip SELECTing revision that isn't used by @mhutchinson in #3207
- Increase some timeouts in integration tests by @mhutchinson in #3203
- Do vuln scanning with a version of Go not subject to GO-2023-2185 by @mhutchinson in #3202
- Bump MariaDB image from 10.3 to 11.1 in Cloud Build by @roger2hk in #3189
- Move golangci-lint from Cloud Build to GitHub Action by @roger2hk in #3188
- Updated all MySQL deps to 8.0 #3182 by @mhutchinson in #3183
- Bump golangci-lint from 1.51.1 to 1.55.1 by @roger2hk in #3177
The above was generated with the following command:
gh pr list -s closed -S "NOT dependabot" --json url,title,author -t '{{range .}}* {{.title}} by @{{.author.login}} in {{.url}}
{{end}}'- Recommended go version for development: 1.20
- This is the version used by the cloudbuild presubmits. Using a different version can lead to presubmits failing due to unexpected diffs.
- mysql: check for error when getting subtrees by @jsha in #3173
- Added comments to show how snippets were generated by @mhutchinson in #3048
- Export logserver read counter metric together with logIDs by @phbnf in #3077
- Register DoFns by @AlCutter in #3083
- Add docker package-ecosystem to Dependabot config by @roger2hk in #3038
- Fix CVE vulnerabilities in mysql base Docker image by @roger2hk in #3037
- Fix db_server Docker image vulnerabilities by @roger2hk in #3049
- Add missing docker and npm Dependabot configs by @roger2hk in #3062
- Add govulncheck GitHub action by @roger2hk in #3089
- Pin Dockerfile base images by hash by @roger2hk in #3090
- Pin golang/govulncheck-action by hash by @roger2hk in #3091
- Pin Dockerfile base images by hash by @roger2hk in #3093
- Add top level read-only permission in govulncheck.yml by @roger2hk in #3092
- Bump go.etcd.io/etcd/etcdctl/v3 from 3.5.8 to 3.5.9 by @dependabot in #3003
- Bump google.golang.org/api from 0.121.0 to 0.122.0 by @dependabot in #3006
- Bump golang.org/x/tools from 0.8.0 to 0.9.1 by @dependabot in #3005
- Bump github.com/apache/beam/sdks/v2 from 2.47.0-RC3 to 2.47.0 by @dependabot in #3000
- Bump golang.org/x/crypto from 0.8.0 to 0.9.0 by @dependabot in #3007
- Bump go.etcd.io/etcd/v3 from 3.5.8 to 3.5.9 by @dependabot in #3004
- Bump actions/setup-go from 4.0.0 to 4.0.1 by @dependabot in #3008
- Bump google.golang.org/api from 0.122.0 to 0.123.0 by @dependabot in #3010
- Bump github/codeql-action from 2.3.3 to 2.3.5 by @dependabot in #3013
- Bump github/codeql-action from 2.3.5 to 2.3.6 by @dependabot in #3020
- Bump golang.org/x/tools from 0.9.1 to 0.9.3 by @dependabot in #3016
- Bump github.com/cockroachdb/cockroach-go/v2 from 2.3.3 to 2.3.4 by @dependabot in #3017
- Bump golangci/golangci-lint-action from 3.4.0 to 3.5.0 by @dependabot in #3021
- Bump golang.org/x/sys from 0.8.0 to 0.9.0 by @dependabot in #3025
- Bump golangci/golangci-lint-action from 3.5.0 to 3.6.0 by @dependabot in #3027
- Bump github/codeql-action from 2.3.6 to 2.13.4 by @dependabot in #3026
- Bump actions/checkout from 3.5.2 to 3.5.3 by @dependabot in #3028
- Bump golang.org/x/tools from 0.9.3 to 0.10.0 by @dependabot in #3029
- Bump github.com/cockroachdb/cockroach-go/v2 from 2.3.4 to 2.3.5 by @dependabot in #3035
- Bump github.com/prometheus/client_golang from 1.15.1 to 1.16.0 by @dependabot in #3030
- Update mysql Dockerfile base image from ubuntu:trusty to ubuntu:jammy by @roger2hk in #3036
- Bump golang.org/x/tools from 0.10.0 to 0.11.0 by @dependabot in #3044
- Bump ossf/scorecard-action from 2.1.3 to 2.2.0 by @dependabot in #3039
- Bump google.golang.org/protobuf from 1.30.0 to 1.31.0 by @dependabot in #3041
- Bump golang.org/x/tools from 0.11.0 to 0.12.0 by @dependabot in #3055
- Bump actions/setup-go from 4.0.1 to 4.1.0 by @dependabot in #3059
- Bump google-auth-library from 8.7.0 to 9.0.0 in /scripts/gcb2slack by @dependabot in #3069
- Bump golang from 1.19-buster to 1.20-buster in /examples/deployment/docker/db_client by @dependabot in #3064
- Bump alpine from 3.8 to 3.18 in /examples/deployment/docker/envsubst by @dependabot in #3067
- Bump golang from 1.19-buster to 1.20-buster in /integration/cloudbuild/testbase by @dependabot in #3065
- Bump golangci/golangci-lint-action from 3.6.0 to 3.7.0 by @dependabot in #3063
- Bump golang from 1.19-buster to 1.20-buster in /examples/deployment/docker/log_server by @dependabot in #3066
- Bump golang from 1.19-buster to 1.20-buster in /examples/deployment/docker/log_signer by @dependabot in #3071
- Bump actions/checkout from 3.5.3 to 3.6.0 by @dependabot in #3076
- Bump go from 1.19 to 1.20 by @mhutchinson in #3080
- Bump golang.org/x/sys from 0.11.0 to 0.12.0 by @dependabot in #3081
- Bump actions/checkout from 3.6.0 to 4.0.0 by @dependabot in #3082
- Bump golang.org/x/crypto from 0.12.0 to 0.13.0 by @dependabot in #3084
- Bump golang.org/x/tools from 0.12.0 to 0.13.0 by @dependabot in #3086
- Bump actions/upload-artifact from 3.1.2 to 3.1.3 by @dependabot in #3085
- Bump Go version in Docker base images to 1.20.8-bookworm by @roger2hk in #3094
- Bump golang from 1.20.8-bookworm to 1.21.1-bookworm in /examples/deployment/docker/db_client by @dependabot in #3100
- Bump gcr.io/kaniko-project/executor from 1.6.0 to 1.15.0 by @roger2hk in #3095
- Bump golang from 1.20.8-bookworm to 1.21.1-bookworm in /integration/cloudbuild/testbase by @dependabot in #3098
- Bump golang from 1.20.8-bookworm to 1.21.1-bookworm in /examples/deployment/docker/log_signer by @dependabot in #3097
- Bump golang from 1.20.8-bookworm to 1.21.1-bookworm in /examples/deployment/docker/log_server by @dependabot in #3099
- Bump golang from
d3114dbtoa0b3bc4in /integration/cloudbuild/testbase by @dependabot in #3104 - Bump golang from
d3114dbtoa0b3bc4in /examples/deployment/docker/log_server by @dependabot in #3105 - Bump golang from
d3114dbtoa0b3bc4in /examples/deployment/docker/log_signer by @dependabot in #3106 - Bump golang from
d3114dbtoa0b3bc4in /examples/deployment/docker/db_client by @dependabot in #3107 - Bump golang from
e06b3a4to114b9ccin /examples/deployment/docker/log_signer by @dependabot in #3108 - Bump trillian-opensource-ci/mysql5 from
51cc6dftoedf7defin /examples/deployment/docker/db_server by @dependabot in #3110 - Bump golang from
a0b3bc4to114b9ccin /examples/deployment/docker/log_server by @dependabot in #3109 - Bump golang from
a0b3bc4to114b9ccin /integration/cloudbuild/testbase by @dependabot in #3111 - Bump actions/checkout from 4.0.0 to 4.1.0 by @dependabot in #3117
- Bump golang from
114b9ccto9c7ea4ain /examples/deployment/docker/db_client by @dependabot in #3116 - Bump golang from
114b9ccto9c7ea4ain /examples/deployment/docker/log_server by @dependabot in #3114 - Bump golang from
114b9ccto9c7ea4ain /examples/deployment/docker/log_signer by @dependabot in #3115 - Bump nick-fields/retry from 2.8.3 to 2.9.0 by @dependabot in #3119
- Bump trillian-opensource-ci/mysql5 from
edf7deftof45c849in /examples/deployment/docker/db_server by @dependabot in #3120 - Bump golang from
9c7ea4ato61f84bcin /examples/deployment/docker/db_client by @dependabot in #3121 - Bump golang from
9c7ea4ato61f84bcin /integration/cloudbuild/testbase by @dependabot in #3124 - Bump golang from
9c7ea4ato61f84bcin /examples/deployment/docker/log_server by @dependabot in #3122 - Bump alpine from
7144f7btoeece025in /examples/deployment/docker/envsubst by @dependabot in #3125 - Bump golang from
9c7ea4ato61f84bcin /examples/deployment/docker/log_signer by @dependabot in #3123 - Bump ubuntu from
aabed32to9b8dec3in /examples/deployment/kubernetes/mysql/image by @dependabot in #3127 - Bump distroless/base-debian12 from
d64f548tocc22d6din /examples/deployment/docker/log_signer by @dependabot in #3128 - Bump distroless/base-debian12 from
d64f548tocc22d6din /examples/deployment/docker/log_server by @dependabot in #3129 - Bump golang from 1.21.1-bookworm to 1.21.2-bookworm in /integration/cloudbuild/testbase by @dependabot in #3134
- Bump golang from 1.21.1-bookworm to 1.21.2-bookworm in /examples/deployment/docker/log_server by @dependabot in #3135
- Bump golang from 1.21.1-bookworm to 1.21.2-bookworm in /examples/deployment/docker/log_signer by @dependabot in #3136
- Bump golang from
0bd76fdtoa44d05din /integration/cloudbuild/testbase by @dependabot in #3137 - Bump ossf/scorecard-action from 2.2.0 to 2.3.0 by @dependabot in #3139
- Bump golang from 1.21.1-bookworm to 1.21.2-bookworm in /examples/deployment/docker/db_client by @dependabot in #3138
- Bump distroless/base-debian12 from
cc22d6dto5be49dein /examples/deployment/docker/log_signer by @dependabot in #3141 - Bump distroless/base-debian12 from
cc22d6dto5be49dein /examples/deployment/docker/log_server by @dependabot in #3142 - Bump trillian-opensource-ci/mysql5 from
f45c849to99d6043in /examples/deployment/docker/db_server by @dependabot in #3143 - Bump golang from 1.21.2-bookworm to 1.21.3-bookworm in /integration/cloudbuild/testbase by @dependabot in #3147
- Bump golang from 1.21.2-bookworm to 1.21.3-bookworm in /examples/deployment/docker/log_server by @dependabot in #3145
- Bump golang from 1.21.2-bookworm to 1.21.3-bookworm in /examples/deployment/docker/log_signer by @dependabot in #3148
- Bump golang from 1.21.2-bookworm to 1.21.3-bookworm in /examples/deployment/docker/db_client by @dependabot in #3144
- Bump go-version-input from 1.20.8 to 1.20.10 in govulncheck by @roger2hk in #3151
- Bump golang.org/x/net from 0.15.0 to 0.17.0 by @dependabot in #3150
- Bump @slack/webhook from 5.0.4 to 7.0.0 in /scripts/gcb2slack by @dependabot in #3130
- Bump google-auth-library from 9.0.0 to 9.1.0 in /scripts/gcb2slack by @dependabot in #3126
- Bump golang from
efde471to5cc7ddcin /integration/cloudbuild/testbase by @dependabot in #3156 - Bump golang from
efde471to5cc7ddcin /examples/deployment/docker/log_server by @dependabot in #3155 - Bump golang from
efde471to20f9ab5in /examples/deployment/docker/db_client by @dependabot in #3152 - Bump golang from
efde471to20f9ab5in /examples/deployment/docker/log_signer by @dependabot in #3154 - Bump golang from
5cc7ddcto20f9ab5in /integration/cloudbuild/testbase by @dependabot in #3158 - Bump ubuntu from
9b8dec3to2b7412ein /examples/deployment/kubernetes/mysql/image by @dependabot in #3157 - Bump actions/checkout from 4.1.0 to 4.1.1 by @dependabot in #3160
- Bump ossf/scorecard-action from 2.3.0 to 2.3.1 by @dependabot in #3164
- Bump google.golang.org/grpc to 1.59.0 fixing CVE-2023-44487 (https://github.com/advisories/GHSA-qppj-fm5r-hxr3) by @cpanato in #3166
- Bump distroless/base-debian12 from
5be49deto1dfdb5ein /examples/deployment/docker/log_server by @dependabot in #3167 - Bump google-auth-library from 9.1.0 to 9.2.0 in /scripts/gcb2slack by @dependabot in #3168
- Bump distroless/base-debian12 from
5be49deto1dfdb5ein /examples/deployment/docker/log_signer by @dependabot in #3169 - Bump trillian-opensource-ci/mysql5 from
99d6043toc079e4ein /examples/deployment/docker/db_server by @dependabot in #3161 - Bump github.com/docker/docker from 24.0.6+incompatible to 24.0.7+incompatible by @dependabot in #3170
- Bump trillian-opensource-ci/mysql5 from
c079e4eto3f355bein /examples/deployment/docker/db_server by @dependabot in #3171 - Bump @slack/webhook from 7.0.0 to 7.0.1 in /scripts/gcb2slack by @dependabot in #3172
- Bump @google-cloud/functions-framework from 1.3.2 to 3.3.0 in /scripts/gcb2slack by @dependabot in #3072
- Recommended go version for development: 1.19
- This is the version used by the cloudbuild presubmits. Using a different version can lead to presubmits failing due to unexpected diffs.
- Removed use of the
--cloudspanner_write_sessionsflag. This was related to preparing some fraction of CloudSpanner sessionpool entries with Read/Write transactions, however this functionality is no longer supported by the client library.
- Enable all lint checks in trillian repo by @mhutchinson in #2979
- Bump contrib.go.opencensus.io/exporter/stackdriver from 0.13.12 to 0.13.14 by @samuelattwood in #2950
- Bump Go version from 1.17 to 1.19.
- Updated golangci-lint to v1.51.1 (developers should update to this version)
- Update transparency-dev/merkle to v0.0.2
- A new storage driver for CockroachDB has been added. It's currently in alpha stage with support provided by Equinix Metal.
- Fix log server not exiting properly on SIGINT
- Switch from glog to klog by @jdolitsky in #2787
- Bump google.golang.org/api from 0.92.0 to 0.93.0 by @dependabot in #2800
- Bump cloud.google.com/go/spanner from 1.36.0 to 1.37.0 by @dependabot in #2803
- Bump google.golang.org/grpc from 1.48.0 to 1.49.0 by @dependabot in #2804
- Bump google.golang.org/api from 0.93.0 to 0.94.0 by @dependabot in #2802
- Bump cloud.google.com/go/spanner from 1.37.0 to 1.38.0 by @dependabot in #2806
- Bump k8s.io/klog/v2 from 2.70.1 to 2.80.0 by @dependabot in #2807
- Bump k8s.io/klog/v2 from 2.80.0 to 2.80.1 by @dependabot in #2808
- Bump github.com/google/go-cmp from 0.5.8 to 0.5.9 by @dependabot in #2809
- Bump google.golang.org/api from 0.94.0 to 0.95.0 by @dependabot in #2810
- Bump go.etcd.io/etcd/etcdctl/v3 from 3.5.4 to 3.5.5 by @dependabot in #2812
- Bump go.etcd.io/etcd/v3 from 3.5.4 to 3.5.5 by @dependabot in #2816
- Bump google.golang.org/api from 0.95.0 to 0.96.0 by @dependabot in #2813
- Bump google.golang.org/api from 0.96.0 to 0.97.0 by @dependabot in #2819
- Bump cloud.google.com/go/spanner from 1.38.0 to 1.39.0 by @dependabot in #2818
- Bump google.golang.org/api from 0.97.0 to 0.98.0 by @dependabot in #2820
- Bump google.golang.org/grpc from 1.49.0 to 1.50.0 by @dependabot in #2821
- Bump google.golang.org/grpc from 1.50.0 to 1.50.1 by @dependabot in #2823
- Bump google.golang.org/api from 0.98.0 to 0.99.0 by @dependabot in #2822
- Bump google.golang.org/api from 0.99.0 to 0.100.0 by @dependabot in #2824
- Bump github.com/prometheus/client_model from 0.2.0 to 0.3.0 by @dependabot in #2825
- Bump golang.org/x/tools from 0.1.12 to 0.2.0 by @dependabot in #2826
- Bump google.golang.org/api from 0.100.0 to 0.101.0 by @dependabot in #2827
- Bump github.com/prometheus/client_golang from 1.13.0 to 1.13.1 by @dependabot in #2828
- Bump golang.org/x/sys from 0.1.0 to 0.2.0 by @dependabot in #2829
- Bump google.golang.org/api from 0.101.0 to 0.102.0 by @dependabot in #2830
- Bump go.opencensus.io from 0.23.0 to 0.24.0 by @dependabot in #2832
- Bump cloud.google.com/go/spanner from 1.39.0 to 1.40.0 by @dependabot in #2831
- Bump github.com/prometheus/client_golang from 1.13.1 to 1.14.0 by @dependabot in #2838
- Bump google.golang.org/api from 0.102.0 to 0.103.0 by @dependabot in #2839
- Bump golang.org/x/crypto from 0.1.0 to 0.2.0 by @dependabot in #2841
- Bump golang.org/x/tools from 0.2.0 to 0.3.0 by @dependabot in #2840
- Dependabot: Also keep GitHub actions up-to-date by @JAORMX in #2842
- Bump actions/upload-artifact from 3.1.0 to 3.1.1 by @dependabot in #2843
- Bump golang.org/x/crypto from 0.2.0 to 0.3.0 by @dependabot in #2847
- Bump google.golang.org/grpc from 1.50.1 to 1.51.0 by @dependabot in #2845
- Bump github.com/cockroachdb/cockroach-go/v2 from 2.2.16 to 2.2.18 by @dependabot in #2846
- Bump go.etcd.io/etcd/v3 from 3.5.5 to 3.5.6 by @dependabot in #2849
- Bump github.com/cockroachdb/cockroach-go/v2 from 2.2.18 to 2.2.19 by @dependabot in #2856
- Bump golang.org/x/sys from 0.2.0 to 0.3.0 by @dependabot in #2858
- Bump cloud.google.com/go/spanner from 1.40.0 to 1.41.0 by @dependabot in #2857
- Bump actions/setup-go from 3.3.1 to 3.4.0 by @dependabot in #2862
- Bump github/codeql-action from 2.1.34 to 2.1.35 by @dependabot in #2861
- Bump golangci/golangci-lint-action from 3.3.0 to 3.3.1 by @dependabot in #2860
- Bump github.com/go-sql-driver/mysql from 1.6.0 to 1.7.0 by @dependabot in #2859
- Bump qs, body-parser and express in /scripts/gcb2slack by @dependabot in #2867
- Bump minimist from 1.2.0 to 1.2.7 in /scripts/gcb2slack by @dependabot in #2864
- Bump axios and @slack/webhook in /scripts/gcb2slack by @dependabot in #2868
- Bump json-bigint and google-auth-library in /scripts/gcb2slack by @dependabot in #2869
- Bump node-fetch from 2.6.0 to 2.6.7 in /scripts/gcb2slack by @dependabot in #2866
- Bump golang.org/x/tools from 0.3.0 to 0.4.0 by @dependabot in #2870
- Bump github/codeql-action from 2.1.35 to 2.1.36 by @dependabot in #2874
- Bump actions/checkout from 3.1.0 to 3.2.0 by @dependabot in #2873
- Bump golang.org/x/crypto from 0.3.0 to 0.4.0 by @dependabot in #2872
- Bump google.golang.org/api from 0.103.0 to 0.104.0 by @dependabot in #2871
- Bump cloud.google.com/go/spanner from 1.41.0 to 1.42.0 by @dependabot in #2877
- Ephemeral nodes are no-longer written for any tree by default (and have not been read since the v1.4.0 release), the corresponding
--tree_ids_with_no_ephemeral_nodesflag is now deprecated (and will be removed in a future release).
- Format code according to go1.19rc2 by @mhutchinson in #2785
- Delete merkle package, use github.com/transparency-dev/merkle instead.
- Fix order-dependent test by @hickford in #2792
- Updated golangci-lint to v1.47.3 (developers should update to this version) by @mhutchinson in #2791
- Bump google.golang.org/api from 0.87.0 to 0.88.0 by @dependabot in #2783
- Bump cloud.google.com/go/spanner from 1.35.0 to 1.36.0 by @dependabot in #2784
- Bump google.golang.org/api from 0.88.0 to 0.90.0 by @dependabot in #2789
- Bump golang.org/x/tools from 0.1.11 to 0.1.12 by @dependabot in #2790
- Bump google.golang.org/protobuf from 1.28.0 to 1.28.1 by @dependabot in #2788
- Bump google.golang.org/api from 0.90.0 to 0.91.0 by @dependabot in #2796
- Bump github.com/prometheus/client_golang from 1.12.2 to 1.13.0 by @dependabot in #2795
- Bump github.com/fullstorydev/grpcurl from 1.8.6 to 1.8.7 by @dependabot in #2794
- Bump google.golang.org/api from 0.91.0 to 0.92.0 by @dependabot in #2798
- #2568: Allow disabling the writes of ephemeral nodes to storage via the
--tree_ids_with_no_ephemeral_nodesflag to the sequencer. - #2748:
--cloudspanner_max_burst_sessionsdeprecated (it hasn't had any effect for a while, now it's more explicit) - #2768: update go.mod to use 1.17 compatibility from 1.13.
- Updated golangci-lint to v1.46.1 (developers should update to this version)
- Removed dependency on certificate-transparency-go
- #2765 copies the required protos from
googleapisintothird_partyin this repository. This simplifies the preconditions in order to compile the proto definitions, and removes a big dependency on$GOPATH/srcwhich was archaic;$GOPATH/src/github.com/googleapis/googleapisis no longer required.
countFromInformationSchemafunction to add support for MySQL 8.
- #2710: Unused
storage/tools/dumplibwas removed. The useful storage format regression test moved tointegration/format. - #2711: Unused
storage/tools/hasherremoved. - #2715: Packages under
merkleare deprecated and to be removed. Use https://github.com/transparency-dev/merkle instead.
- #2712: Fix MySQL world-writable config warning.
- #2726: Check the tile height invariant stricter. No changes required.
- #2731: Update
protocfromv3.12.4tov3.20.1
- Recommended go version for development: 1.17
- This is the version used by the cloudbuild presubmits. Using a different version can lead to presubmits failing due to unexpected diffs.
- GCP terraform script updated. GKE 1.19 and updated CPU type to E2
Many dep updates, including:
- Upgraded to etcd v3 in order to allow grpc to be upgraded (#2195)
- etcd was
v0.5.0-alpha.5, nowv3.5.0
- etcd was
- grpc upgraded from
v1.29.1tov1.40.0 - certificate-transparency-go from
v1.0.21tov1.1.2-0.20210512142713-bed466244fa6 - protobuf upgraded from
v1tov2 - MySQL driver from
1.5.0to1.6.0
- Removed signatures from LogRoot and EntryTimestamps returned by RPCs (reflecting that there should not be a trust boundary between Trillian and the personality.)
- Removed the deprecated crypto.NewSHA256Signer function.
- Finish removing the
LogMetadata.GetUnsequencedCounts()method. - Removed the following APIs:
TrillianLog.GetLeavesByHashTrillianLog.GetLeavesByIndexTrillianLog.QueueLeaves
- Removed the incomplete Postgres storage backend (#1298).
- Deprecated
LogRootV1.Revisionfield. - Moved
rfc6962hasher one directory up to eliminate empty leftover package. - Removed unused
log_clienttool. - Various tidyups and improvements to merke & proof generation code.
- Remove some remnants of experimental map.
NodeReader.GetMerkleNodesdoes not accept revisions anymore. The implementations must use the transaction'sReadRevisioninstead.TreeStoragemigrated to usingcompact.NodeIDtype suitable for logs.- Removed the tree storage
ReadRevisionandWriteRevisionmethods. Revisions are now an implementation detail of the current storages. The change allows log implementations which don't need revisions. - Removed
Rollbackmethods from storage interfaces, asCloseis enough to cover the use-case. - Removed the unused
IsOpenandIsClosedmethods from transaction interfaces. - Removed the
ReadOnlyLogTXinterface, and put its only usedGetActiveLogIDsmethod toLogStorage. - Inlined the
LogMetadatainterface toReadOnlyLogStorage. - Inlined the
TreeStorageinterfaces toLogStorage. - Removed the need for the storage layer to return ephemeral node hashes. The application layer always requests for complete subtree nodes comprising the compact ranges corresponding to the requests.
- Removed the single-tile callback from
SubtreeCache, it uses onlyGetSubtreesFuncnow. - Removed
SetSubtreesFunccallback fromSubtreeCache. The tiles should be written by the caller now, i.e. the caller must invoke the callback.
- Removed the experimental map API.
- Removed unused
PeekTokensmethod from thequota.Managerinterface. - Ensure goroutines never block in the subtree cache (#2272).
- Breaking unnecessary dependencies for Trillian clients:
- Moved verifiers from
merkleintomerkle/{log,map}verifiersub-pacakges, reducing the amount of extra baggage inadvertently pulled in by clients.
- Moved verifiers from
- Concrete hashers have been moved into subpackages, separating them from their registration code, allowing clients to directly pull just the hasher they're interested in and avoid the Trillian/hasher registry+protobuf deps.
- Moved some packages intended for internal-only use into
internalpackages:- InMemoryMerkleTree (indended to only be used by Trillian tests)
- Removed wrapper for etcd client (#2288).
- Moved
--quota_systemand--storage_systemflags tomain.goso that they are initialised properly. It might break depending builds relying on these flags. Suggested fix: add the flags tomain.go. - Made signer tolerate mastership election failures [#1150].
testdbno longer accepts the--test_mysql_uriflag, and instead honours theTEST_MYSQL_URIENV var. This makes it easier to blanket configure tests to use a specific test DB instance.- Removed experimental Skylog folder (#2297).
- Fixed a race condition in the operation manager that should only affect tests (#2302).
- Run gofumpt formatter on the whole repository (#2315).
- Refactor signer operation loop (#2294).
- Dockerfiles are now based on Go 1.13 image.
- The etcd is now pinned to v3.4.12.
- The golangci-lint suite is now at v1.36.0.
- CI/CD has migrated from Travis to Google Cloud Build.
- prometheus from 1.7.1 to 1.9.0 (#2239, #2270).
- go-cmp from 0.5.2 to 0.5.4 (#2262).
- apache/beam from 2.26.0+incompatible to 2.27.0+incompatible (#2273).
- lib/pq from 1.8.0 to 1.9.0 (#2264).
- go-redis from 6.15.8+incompatible to 6.15.9+incompatible (#2215).
- Recognise that we do not follow strict semantic versioning practices.
Added docs which describe the Claimant Model of transparency, a useful framework for reasoning about the design and architecture of transparent systems.
- Fixed int to string conversion warnings for golang 1.15
- Metric improvements for fetched leaf counts
- Move tools.go into its own directory to help with dependencies
- go-grpc-middleware from 1.2.0 to 1.2.2 (#2219, #2229)
- stackdriver from 0.13.2 to 0.13.4 (#2220, #2223)
- Google api from 0.28.0 to 0.29.0 (#2193)
The StorageProvider type and helpers have been moved from the server package to storage. Aliases for the old types/functions are created for backward compatibility, but the new code should not use them as we will remove them with the next major version bump. The individual storage providers have been moved to the corresponding packages, and are now required to be imported explicitly by the main file in order to be registered. We are including only MySQL and cloudspanner providers by default, since these are the ones that we support.
The cloudspanner storage is supported for logs only, while the Map storage API is being polished and decoupled from the log storage API. We may return the support when the new API is tested.
Support for storage of Ed25519 signatures has been added to the mysql and postgres storage drivers (only applicable in new installations) and bugs preventing correct usage of that algorithm have been fixed.
QueueLeaveshas been removed from theLogTreeTXinterface becauseQueueLeavesis not transactional. All callers use theQueueLeavesfunction in theLogStorageinterface.AddSequencedLeaveshas been removed from theLogTreeTX.
The queued_leaves metric is removed, and replaced by added_leaves which
covers both QueueLeaves and AddSequencedLeaves, and is labeled by log ID.
mysql will now remove leaves from the queue inside of UpdateLeaves rather
than directly inside of Dequeue.
This change brings the behavior of the mysql storage implementation into line
with the spanner implementation and makes consistent testing possible.
The verifiable map is still experimental. APIs, such as SetLeaves, have been deprecated and will be deleted in the near future. The semantics of WriteLeaves have become stricter: now it always requires the caller to specify the write revision. These changes will not affect the Trillian module semantic version due to the experimental status of the Map.
Map API has been extended with Layout, GetTiles and SetTiles calls which allow for more direct processing of sparse Merkle tree tiles in the application layer. Map storage implementations are simpler, and no longer use the SubtreeCache.
The map client has been updated so that GetAndVerifyMapLeaves and GetAndVerifyMapLeavesByRevision return the MapRoot for the revision at which the leaves were fetched. Without this callers of GetAndVerifyMapLeaves in particular were unable to reason about which map revision they were seeing. The SetAndVerifyMapLeaves method was deleted.
- etcd from v3.3.18 to 3.4.7 (#2090)
- etcd-operator from v0.9.1 to v0.9.4
- upgraded protoc version to latest (#2088)
- github.com/golang/protobuf to v1.4.1 (#2111)
- google.golang.org/grpc from v1.26 to 1.29.1 (#2108)
The HTTP/JSON APIs have been removed in favor of a pure gRPC intereface. grpcurl is the recommended way of interacting with the gRPC API from the commandline.
The trillian_log_server, trillian_log_signer and trillian_map_server
binaries have moved from github.com/google/trillian/server/ to
github.com/google/trillian/cmd. A subset of the server package has also
moved and has been split into cmd/internal/serverutil, quota/etcd and
quota/mysqlqm packages.
The Kubernetes configs will now provision 5 nodes for Trillian's Etcd cluster, instead of 3 nodes. This makes the Etcd cluster more resilient to nodes becoming temporarily unavailable, such as during updates (it can now tolerate 2 nodes being unavailable, instead of just 1).
A count of the total number of individual leaves the logserver attempts to fetch via the GetEntries.* API methods has been added.
A potential deadlock condition in the log sequencer when the process is attempting to exit has been addressed.
An experimental Redis-based quota.Manager implementation has been added.
Quota used to be refunded for all failed requests. For uses of quota that were
to protect against abuse or fair utilization, this could allow infinite QPS in
situations that really should have the requests throttled. Refunds are now only
performed for tokens in Global buckets, which prevents tokens being leaked if
duplicate leaves are queued.
The licenses tool has been moved from "scripts/licenses" to a dedicated
repository.
Python support is disabled unless we hear that the community cares about this being re-enabled. This was broken by a downstream change and without a signal from the Trillian community to say this is needed, the pragmatic action is to not spend time investigating this issue.
Published 2019-10-31 17:30:00 +0000 UTC
Patch release to address Go Module issue. Removes replace directives in our
go.mod file now that our dependencies have fixed their invalid pseudo-version
issues.
Published 2019-09-05 17:30:00 +0000 UTC
Patch release to address Go Module issue. Some dependencies use invalid pseudo-
versions in their go.mod files that Go 1.13 rejects. We've added replace
directives to our go.mod file to fix these invalid pseudo-versions.
Published 2019-08-16 15:00:00 +0000 UTC
Patch release primarily to address Go Module issue. v1.3.0 declared a dependency on github.com/russross/blackfriday/v2 v2.0.1+incompatible which made downstream dependencies suffer.
Published 2019-07-17 15:00:00 +0000 UTC
This at the storage layer and does not affect the log server API.
This is part of work to fix proto buffer usages where they are passed
by value or compared by generic code like reflect.DeepEquals(). Passing
them by value creates shallow copies that can share internal state. As the
generated structs contain additional exported XXX_ fields generic
comparisons using all fields can produce incorrect results.
To support passing a context down to NodeStorage.SetLeaves, and remove various context.TODO()s,
the following functions have been modified to accept a context.Context parameter:
storage/cache.NodeStorage.SetLeavesstorage/cache.SetSubtreesFuncstorage/cache.SubtreeCache.Flushstorage.ReadonlyLogTX.Commit
Go Module support has been enabled. Please use GO111MODULE=on to build Trillian. Updating dependencies no longer requires updating the vendor directory.
New API service for writing to the Trillian Map. This allows APIs such as GetLeavesByRevisionNoProof to be removed from the read API, and these methods to be tuned & provisioned differently for read vs write performance.
Allow map clients to forgo fetching inclusion proofs. This dramatically speeds things up for clients that don't need verifiability. This situation occurs in some situation where a Trillian personality is interacting directly with the Trillian Map.
New GetMapLeafByRevision API for fetching a single map leaf. This allows there to be a separate API end point for fetching a single leaf vs. the batch GetMapLeavesByRevision API which is much slower when many leaves are requested. This supports separate monitoring and alerting for different traffic patterns.
The trillian_log_server, trillian_log_signer and trillian_map_server
binaries now have CPU and heap profiling flags. Profiling is off by default.
For more details see the
Go Blog.
The map mode has had some performance tweaks added:
- A workaround for locking issues which affect the map when it's used in single-transaction mode.
Added a batch version of the Merkle Tree InclusionProof function.
Updated the map RPC for getLeaves to use the new batch function to improve efficiency.
Google Cloud Spanner is now a supported storage backend for maps.
The admin API calls to list trees backed by Cloud Spanner trees are fixed.
There were some cases where the Log RPC server could leak storage transactions
in error situations. These have now been fixed. If you have a custom storage
implementation review the fixes made to the MySQL Log storage to see if they
need to be applied to your code (storage/mysql/log_storage.go). The Map
server had similar issues but these were fixed without requiring changes to
storage code.
GetLatestSignedLogRoot in the LogServer will return a consistency proof if
first_tree_size > 0. This reduces the number of RPC calls from logClient from
2 to 1 in client.getAndVerifyLatestRoot.
Support has been added for testing against a locally running mysql docker image, in addition to a locally running mysql instance.
Important Note: For use in Certificate Transparency this version of the logserver binary won't work properly with an older CTFE. Make sure to update the CTFE servers to a current version (built from a git checkout after March 20th 2019) before deploying logservers that include this change or deploy them together with this release. Failure to do this can result in 5XX errors being returned to clients when the old handler code tries to access fields in responses that no longer exist.
All the fields marked as deprecated in this proto have been removed. All the same fields are available via the TLS marshalled log root in the proto. Updating affected code is straightforward.
Normally, clients will want to verify that the signed root is correctly signed. This is the preferred way to interact with the root data.
There is a utility function provided that will verify the signature and unpack
the TLS data. It works well in conjunction with a LogVerifier. The public key
of the server is required.
verifier := client.NewLogVerifier(rfc6962.DefaultHasher, pk, crypto.SHA256)
root, err := crypto.VerifySignedLogRoot(verifier.PubKey, verifier.SigHash, resp.SignedLogRoot)
if err != nil {
// Signature verified and unmarshalled correctly. The struct may now
// be used.
if root.TreeSize > 0 {
// Non empty tree.
}
}Two new flags have been added that limit connections to MySQL database servers:
--mysql_max_conns- limits the total number of database connections--mysql_max_idle_conns- limits the number of idle database connections
By default, there is no maximum number of database connections. However, the
database server will likely impose limits on the number of connections. The
default limit on idle connections is controlled by
Go's sql package.
Concurrently using a single MySQL transaction can cause the driver to error out, so we now attempt to prevent this from happening.
Previously, these were restricted to 20 bytes and 200 bytes respectively. These limits have been removed. However, the underlying storage implementation may still impose its own limitations.
The log server now checks that leaf hashes are the correct length and returns an InvalidArgument error if they are not. Previously, GetLeavesByHash would simply not return any matching leaves for invalid hashes, and GetInclusionProofByHash would return a NotFound error.
A MapClient has been added to simplify interacting with the map server.
This version includes a change to the MySQL and Postgres database schemas to add
an index on the SequencedLeafData table. This improves performance for
inclusion proof queries.
The Trillian Docker images now accept GOFLAGS and GO111MODULE arguments and set them as environment variables inside the Docker container.
The db_server Docker image is now based on the MySQL 5.7 image from the Google Cloud Marketplace, rather than the official MySQL 5.7 image. This Dockerfile supercedes Dockerfile.db, which has been removed.
There is now a mysql.cnf file alongside the Dockerfile that makes it easy to build the image with a custom configuration, e.g. to allow MySQL to use more memory.
The trillian-log-service and trillian-log-signer Kubernetes services will
now have load balancers configured for them that expose those services outside
of the Kubernetes cluster. This makes it easier to access their APIs. When
deployed on Google Cloud, these will be
Internal Load Balancers.
Note that this change cannot be applied to an existing deployment; delete
the existing Kubernetes services and redeploy them, otherwise you'll see an
error similar to The Service "trillian-log-service" is invalid: spec.clusterIP: Invalid value: "": field is immutable.
A working Docker Compose configuration is now available and can be used to bring up a local Trillian deployment for testing and experimental purposes:
docker-compose -f examples/deployment/docker-compose.yml upDocker Compose v3.1 or higher is required.
The Terraform, Kubernetes and Docker configuration files, as well as various
scripts, all now use the same, consistently-named environment variables for
MySQL-related data (e.g. MYSQL_DATABASE). The variable names are based on
those for the
MySQL Docker image.
Docker images have been upgraded from Go 1.9 to 1.11. They now use "Distroless" base images.
Quota metrics with specs of the form users/<user>/read and
users/<user>/write are no longer exported by the Trillian binaries (as they
lead to excessive storage requirements for Trillian metrics).
Added a timeout to the context in the sequencing loop, with a default of 60s.
Resolved a bug that would hide errors and cause the OperationLoop to hang
until process exit if any error occurred.
gometalinter has been replaced with golangci-lint for improved performance and Go module support.
CompactMerkleTree has been removed from github.com/google/trillian/merkle,
and a new package github.com/google/trillian/merkle/compact was introduced. A
new powerful data structure named "compact range" has been added to that
package, and is now used throughout the repository instead of the compact tree.
It is a generalization of the previous structure, as it allows manipulating
arbitrary sub-ranges of leaves rather than only prefixes.
The internal storage API is modified so that the ReadOnlyTreeTX.ReadRevision and TreeWriter.WriteRevision entrypoints take a context.Context parameter and return an optional error.
The SubtreeCache.GetNodeHash() method is no longer exported.
The memory storage provider has been refactored to make it more consistent with the other storage providers.
The LogMetadata.GetUnsequencedCounts() method has been removed.
NodeReader.GetMerkleNodes now must return Node objects in the same order as
node IDs requested. Storage implementations known to us already adhere to this
requirement.
The maphammer test tool for the experimental Trillian Map has been enhanced.
The following flags for the signer have new default values:
--sequencer_interval: changed from 10 seconds to 100 milliseconds--batch_size: changed from 50 to 1000
These changes improve the signer's throughput and latency under typical conditions.
The --resign_odds flag in logsigner is removed, in favor of a more generic
--master_hold_jitter flag. Operators using this flag are advised to set the
jitter to master_check_interval * resign_odds * 2 to achieve similar behavior.
The --master_check_interval flag is removed from logsigner.
logsigner switched to using a new master election interface contained in
util/election2 package. The interfaces in util/election are removed.
Support has been added for a CONIKS sparse tree hasher with SHA256 as the hash
algorithm. Set a tree's hash_strategy to CONIKS_SHA256 to use it.
The performance of SetLeaves requests on the Map has been slightly improved.
The performance of GetConsistencyProof requests has been improved when using
MySQL.
Some warning-level logging has been removed from the sequencer in favour of returning the same information via the returned error. The caller may still choose to log this information. This allows storage implementations that retry transactions to suppress warnings when a transaction initially fails but a retry succeeds.
Some incorrectly-formatted log messages have been fixed.
API documentation in Markdown format is now available.
The TimeSource type (and other time utils) moved to a separate util/clock
package, extended with a new Timer interface that allows mocking time.Timer.
The Sequencer.SignRoot() method has been removed.
Published 2018-08-20 10:31:00 +0000 UTC
A race condition was fixed that affected sparse Merkle trees as served by the map server.
The maphammer uses a consistent empty check, fixing spurious failures in some
tests.
The createtree etc. set of utilities now support TLS via the -tls-cert-file
flag. This support is also available as a client module.
GetAndVerifyInclusionAtIndex no longer updates the clients root on every
access as this was an unexpected side effect. Clients now have explicit control
of when the root is updated by calling UpdateRoot.
A root parameter is now required when log clients are constructed.
The client will now only retry requests that fail with the following errors:
- Aborted
- DeadlineExceeded
- ResourceExhausted
- Unavailable
There is one exception - it will also retry InitLog/InitMap requests that fail due to a FailedPrecondition error.
The Travis build script has been updated for newer versions of MySQL (5.7 through MySQL 8) and will no longer work with 5.6.
Commit f3eaa887163bb4d2ea4b4458cb4e7c5c2f346bc6 Download zip
Published 2018-06-25 10:42:52 +0000 UTC
The Log Signer now tries to avoid creating roots older than ones that already exist. This issue has been seen occurring on a test system. Important note: If running this code in production allowing clocks to drift out of sync between nodes can cause other problems including for clustering and database replication.
The Log Signer now publishes metrics for the logs that it is actively signing. In a clustered environment responsibility can be expected to move around between signer instances over time.
The Log API now allows personalities to explicitly list a vector of identifiers
which should be charged for User quota. This allows a more nuanced application
of request rate limiting across multiple dimensions. Some fixes have also been
made to quota handling e.g. batch requests were not reserving the appropriate
quota. Consult the corresponding PRs for more details.
For the log RPC server APIs GetLeavesByIndex and GetLeavesByRange MySQL
storage has been modified to return status codes that match CloudSpanner.
Previously some requests with out of range parameters were receiving 5xx error
status rather than 4xx when errors were mapped to the HTTP space by CTFE.
The Kubernetes deployment scripts continue to evolve and improve.
Commit aef10347dba1bd86a0fcb152b47989d0b51ba1fa Download zip
Published 2018-05-08 12:55:34 +0000 UTC
More improvements have been made to the CloudSpanner storage code. CloudSpanner storage has now been tested up to ~3.1 billion log entries.
Explicit health checks have been added to the gRPC Log and Map servers (and the
log signer). The HTTP endpoint must be enabled and the checks will serve on
/healthz where a non 200 response means the server is unhealthy. The example
Kubernetes deployment configuration has been updated to include them. Other
improvements have been made to the Kubernetes deployment scripts and docs.
The gRPC Log and Map servers have been instrumented for tracing with
OpenCensus. For GCP it just requires the --tracing
flag to be added and results will be available in the GCP console under
StackDriver -> Trace.
Commit 3a68a845f0febdd36937c15f1d97a3a0f9509440 Download zip
Published 2018-04-17 08:02:50 +0000 UTC
Changes are in progress (e.g. see #1037) to rework the internal signed root
format used by the log RPC server to be more useful / interoperable. Currently
they are mostly internal API changes to the log and map servers. However, the
signature and log_id fields in SignedLogRoot have been deleted and users
must unpack the serialized structure to access these now. This change is not
backwards compatible.
Changes have been made to log server APIs and CT frontends for when a request hits a server that has an earlier version of the tree than is needed to satisfy the request. In these cases the log server used to return an error but now returns an empty proof along with the current STH it has available. This allows clients to detect these cases and handle them appropriately.
The CloudSpanner schema has changed. If you have a database instance you'll need to recreate it with the new schema. Performance has been noticeably improved since the previous release and we have tested it to approx one billion log entries. Note: This code is still being developed and further changes are possible.
Support for sqlite in unit tests has been removed because of ongoing issues
with flaky tests. These were caused by concurrent accesses to the same database,
which it doesn't support. The use of sqlite in production has never been
supported and it should not be used for this.
Commit 9a5dc6223bab0e1061b66b49757c2418c47b9f29 Download zip
Published 2018-03-08 13:42:11 +0000 UTC
The Docker image files have been updated and the database has been changed to
MariaDB 10.1.
A ReadOnlyStaleness option has been added to the experimental CloudSpanner
storage. This allows for tuning that might increase performance in some
scenarios by issuing read transactions with the exact_staleness option set
rather than strong_read. For more details see the
CloudSpanner TransactionOptions
documentation.
The LogVerifier interface has been removed from the log client, though the
functionality is still available. It is unlikely that there were implementations
by third-parties.
A new TreeState DRAINING has been added for trees with TreeType LOG. This is
to support logs being cleanly frozen. A log tree in this state will not accept
new entries via QueueLeaves but will continue to integrate any that were
previously queued. When the queue of pending entries has been emptied the tree
can be set to the FROZEN state safely. For MySQL storage this requires a
schema update to add 'DRAINING' to the enum of valid states.
A command line utility updatetree has been added to allow tree states to be
changed. This is also to support cleanly freezing logs.
A 'howto' document has been added that explains how to freeze a log tree using the features added in this release.
Commit 0e6d950b872d19e42320f4714820f0fe793b9913 Download zip
Published 2018-03-01 11:16:32 +0000 UTC
Note: A large number of storage related API changes have been made in this release. These will probably only affect developers writing their own storage implementations.
A new tree type ORDERED_LOG has been added for upcoming mirror support. This
requires a schema change before it can be used. This change can be made when
convenient and can be deferred until the functionality is available and needed.
The definition of the TreeType column enum should be changed to ENUM('LOG', 'MAP', 'PREORDERED_LOG') NOT NULL
Some storage interfaces were removed in #977 as they only had one implementation. We think this won't cause any impact on third parties and are willing to reconsider this change if it does.
The gRPC Log and Map server APIs have new methods InitLog and InitMap which
prepare newly created trees for use. Attempting to use trees that have not been
initialized will return the FAILED_PRECONDITION error
storage.ErrTreeNeedsInit.
The gRPC Log server API has new methods AddSequencedLeaf and
AddSequencedLeaves. These are intended to support mirroring applications and
are not yet implemented.
Storage APIs have been added such as ReadWriteTransaction which allows the
underlying storage to manage the transaction and optionally retry until success
or timeout. This is a more natural fit for some types of storage API such as
CloudSpanner and possibly
other environments with managed transactions.
The older BeginXXX methods were removed from the APIs. It should be fairly
easy to convert a custom storage implementation to the new API format as can be
seen from the changes made to the MySQL storage.
The GetOpts options are no longer used by storage. This fixed the strange
situation of storage code having to pass manufactured dummy instances to
GetTree, which was being called in all the layers involved in request
processing. Various internal APIs were modified to take a *trillian.Tree
instead of an int64.
A new storage implementation has been added for CloudSpanner. This is currently experimental and does not yet support Map trees. We have also added Docker examples for running Trillian in Google Cloud with CloudSpanner.
The maximum size of a VARBINARY column in MySQL is too small to properly
support Map storage. The type has been changed in the schema to MEDIUMBLOB.
This can be done in place with an ALTER TABLE command but this could very be
slow for large databases as it is a change to the physical row layout. Note:
There is no need to make this change to the database if you are only using it
for Log storage e.g. for Certificate Transparency servers.
The obsolete programs queue_leaves and fetch_leaves have been deleted.
Commit 7d73671537ca2a4745dc94da3dc93d32d7ce91f1 Download zip
Published 2018-02-05 16:00:26 +0000 UTC
A new log server RPC API has been added to get leaves in a range. This is a more natural fit for CT type applications as it more closely follows the CT HTTP API.
The server now returns 403 for permission denied where it used to return 500 errors. This follows the behaviour of the C++ implementation.
The log signer binary now reports metrics for the number it has signed and the number of errors that have occurred. This is intended to give more insight into the state of the queue and integration processing.
Commit b20b3109af7b68227c83c5d930271eaa4f0be771 Download zip
Published 2018-02-07 09:41:08 +0000 UTC
The API protos have been rebuilt with gRPC 1.3.
Timestamps have been added to the log leaves in the MySQL database. Before upgrading to this version you must make the following schema changes:
-
Add the following column to the
LeafDatatable. If you have existing data in the queue you might have to remove the NOT NULL clause:QueueTimestampNanos BIGINT NOT NULL -
Add the following column to the
SequencedLeafDatatable:IntegrateTimestampNanos BIGINT NOT NULL
The above timestamps are used to export metrics via monitoring that give the merge delay for each tree that is in use. This is a good metric to use for alerting on.
The Log and Map RPC servers now support TLS.
AdminServer tests have been improved.
Commit dec673baf984c3d22d7b314011d809258ec36821 Download zip
Published 2018-02-05 15:42:25 +0000 UTC
An issue has been fixed where the master for a log could resign from the election while it was in the process of integrating a batch of leaves. We do not believe this could cause any issues with data integrity because of the versioned tree storage.
This release includes a large number of vendor commits merged to catch up with etcd 3.2.10 and gRPC v1.3.
Commit 1713865ecca0dc8f7b4a8ed830a48ae250fd943b Download zip
Published 2018-02-05 15:33:08 +0000 UTC
An authorization API has been added to the interceptors. This is intended for future development and integration.
Issues where the interceptor would not time out on PutTokens have been fixed.
This should make the quota system more robust.
A bug has been fixed where the interceptor did not pass the context deadline through to other requests it made. This would cause some failing requests to do so after longer than the deadline with a misleading reason in the log. It did not cause request failures if they would otherwise succeed.
Metalinter has been added and the code has been cleaned up where appropriate.
Docker and Kubernetes scripts have been available and images are now built with Go 1.9.
Sqlite has been introduced for unit tests where possible. Note that it is not multi threaded and cannot support all our testing scenarios. We still require MySQL for integration tests. Please note that Sqlite must not be used for production deployments as RPC servers are multi threaded database clients.
The Log RPC server now applies tighter validation to request parameters than before. It's possible that some requests will be rejected. This should not affect valid requests.
The admin server will only create trees for the log type it is hosted in. For example the admin server running in the Log server will not create Map trees. This may be reviewed in future as applications can legitimately use both tree types.
Commit 9d08b330ab4270a8e984072076c0b3e84eb4601b Download zip
Published 2018-02-05 15:18:40 +0000 UTC
Go 1.9 is required.
It is now possible to update private keys via the admin API and this was added to the available field masks. The key storage format has not changed so we believe this change is transparent.
Deleted trees are now garbage collected after an interval. This hard deletes them and they cannot be recovered. Be aware of this before upgrading if you have any that are in a soft deleted state.
The Admin RPC API has been extended to allow trees to be undeleted - up to the point where they are hard deleted as set out above.
Commit 442511ad82108654033c9daa4e72f8a79691dd32 Download zip
Published 2018-02-05 14:49:33 +0000 UTC
Apart from fixes this release includes the option for a batched queue. This has been reported to allow faster sequencing but is not enabled by default.
If you want to switch to this you must build the code with the --tags batched_queue option. You must then also apply a schema change if you are
running with a previous version of the database. Add the following column to the
Unsequenced table:
QueueID VARBINARY(32) DEFAULT NULL
If you don't plan to switch to the batched_queue mode then you don't need to
make the above change.
Commit afd178f85c963f56ad2ae7d4721d139b1d6050b4 Download zip
Published 2018-02-05 13:51:55 +0000 UTC
Quota metrics published. Quota admin api + server implemented. Improvements to local / AWS deployment. Map fixes and further development. ECDSA key handling improvements. Key factory improvements. Code coverage added. Quota integration test added. Etcd quota support in log and map connected up. Incompatibility with C++ code fixed where consistency proof requests for first == second == 0 were rejected.
Commit a6546d092307f6e0d396068066033b434203824d Download zip