vscode.md

Development using Visual Studio Code

1. In Visual Studio Code, install the following extensions:

   • CMake Tools (handles configuring and building the project, requires CMake to be installed),
   • Cortex-Debug and Cortex-Debug: Device Support Pack - STM32F4 (support for debugging of the firmware),
   • ccls extension, which provides autocompletion and code navigation.
   • Code Spell Checker (streetsidesoftware.code-spell-checker) extension, which provides spell checking and correction suggestions.

2. Install ccls on your system

   • Linux: sudo snap install ccls --classic (full instructions)

     • Also, check out this: https://github.com/MaskRay/ccls/wiki/FAQ#maximum-number-of-file-descriptors

   • Mac: brew install ccls

   • Windows

     1. Download our precompiled binaries from [here](https://prusa-buddy-firmware-dependencies.s3.eu-central-1.amazonaws.com/windows_tools.zip). 2. Unzip them to `C:\Tools` so your file structure looks like this:

       ```
       C:\Tools
        ├── LLVM
        └── lsp-ccls
       ```
     

     3. Add the path to the ccls binary to your Visual Studio Code's settings:

        1. Ctrl+Shift+P and Preferences: Open Settings (JSON)

        2. Add the following to the JSON.

           "ccls.launch.command": "c:\\Tools\\lsp-ccls\\bin\\ccls.exe",

3. Install OpenOCD

   • Linux: sudo apt install openocd

   • Mac: brew install openocd --HEAD

   • Windows

     1. Download the latest version from [here](https://gnutoolchains.com/arm-eabi/openocd). 2. Extract the content to some permanent location. 3. In vscode, Ctrl+Shift+P and `Preferences: Open Settings (JSON)` 4. Add the following line with appropriate path the openocd executable.

       ```json
       "cortex-debug.openocdPath": "c:\\Path\\To\\openocd.exe"
       ```
     

4. In Visual Studio Code, open the directory with this repository.

FAQ

Bad CMake Executable "", VSCODE cannot configure project

This is a well known issue. See microsoft/vscode-cmake-tools#685 for more details. Workaround is to reinstall CMake, close vscode and with another start the project should configure itself with no problem.

OpenOCD: Error: Can't find interface/stlink.cfg

Most likely, your OpenOCD is too old (or let's rephrase it - not new enough). The general solution is to uninstall it and build it from source yourself! Yay! 💪

1. git clone https://github.com/ntfreak/openocd.git
2. And follow the instructions in the readme (your are mostly interested in OpenOCD Dependencies and Compiling OpenOCD).

Linux/Ubuntu: libusb_open() failed with LIBUSB_ERROR_ACCESS

If you get an error like this, you are missing permissions to access the USB interface: On Ubuntu this may be solved:

echo 'SUBSYSTEM=="usb",GROUP="users",MODE="0666"' > /etc/udev/rules.d/90-usbpermission.rules
udevadm control --reload-rules

Unplug and plug the STlink back and it should work.

Linux/Ubuntu: Error: couldn't bind tcl to socket on port 6666: Address already in use

The openocd process is already running - kill it ;) . This also can keep doing an Issue below with libncurses.

Linux/Ubuntu: arm-none-eabi-gdb not working

If you get an error like error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory on a newer incarnation of Linux/Ubuntu, it means your libraries (libncurses and probably also libtinfo) are newer than the arm-gdb was compiled for. The output from ldd shows, that the arm-gdb didn't get all its libraries:

$ ldd PrusaFirmwareBuddy/.dependencies/gcc-arm-none-eabi-7.3.1/bin/arm-none-eabi-gdb
        linux-vdso.so.1 (0x00007fff072a8000)
        libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007f900b711000)
        libncurses.so.5 => not found
        libtinfo.so.5 => not found
        libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x00007f900b5c2000)
        libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f900b3d1000)
        /lib64/ld-linux-x86-64.so.2 (0x00007f900b751000)

On Ubuntu 19.10 or Arch Linux this is exacty the case, the system contains libncurses.so.6 and not libncurses.so.5. This may be hacked similarly like this:

ln -s /usr/lib/x86_64-linux-gnu/libncurses.so.6 /usr/lib/x86_64-linux-gnu/libncurses.so.5
ln -s /usr/lib/x86_64-linux-gnu/libtinfo.so.6 /usr/lib/x86_64-linux-gnu/libtinfo.so.5

Surprisingly, the arm-gdb is fine and works well then.