mkdoc.zsh

#!/usr/bin/env zsh
[ "${ZSH_VERSION:-}" = "" ] && echo >&2 "Only works with zsh" && exit 1
setopt err_exit no_unset pipefail extended_glob

# Simple script to update the godoc comments on all watchers so you don't need
# to update the same comment 5 times.

watcher=$(<<EOF
// Watcher watches a set of paths, delivering events on a channel.
//
// A watcher should not be copied (e.g. pass it by pointer, rather than by
// value).
//
// # Linux notes
//
// When a file is removed a Remove event won't be emitted until all file
// descriptors are closed, and deletes will always emit a Chmod. For example:
//
//	fp := os.Open("file")
//	os.Remove("file")        // Triggers Chmod
//	fp.Close()               // Triggers Remove
//
// This is the event that inotify sends, so not much can be changed about this.
//
// The fs.inotify.max_user_watches sysctl variable specifies the upper limit
// for the number of watches per user, and fs.inotify.max_user_instances
// specifies the maximum number of inotify instances per user. Every Watcher you
// create is an "instance", and every path you add is a "watch".
//
// These are also exposed in /proc as /proc/sys/fs/inotify/max_user_watches and
// /proc/sys/fs/inotify/max_user_instances
//
// To increase them you can use sysctl or write the value to the /proc file:
//
//	# Default values on Linux 5.18
//	sysctl fs.inotify.max_user_watches=124983
//	sysctl fs.inotify.max_user_instances=128
//
// To make the changes persist on reboot edit /etc/sysctl.conf or
// /usr/lib/sysctl.d/50-default.conf (details differ per Linux distro; check
// your distro's documentation):
//
//	fs.inotify.max_user_watches=124983
//	fs.inotify.max_user_instances=128
//
// Reaching the limit will result in a "no space left on device" or "too many open
// files" error.
//
// # kqueue notes (macOS, BSD)
//
// kqueue requires opening a file descriptor for every file that's being watched;
// so if you're watching a directory with five files then that's six file
// descriptors. You will run in to your system's "max open files" limit faster on
// these platforms.
//
// The sysctl variables kern.maxfiles and kern.maxfilesperproc can be used to
// control the maximum number of open files, as well as /etc/login.conf on BSD
// systems.
//
// # Windows notes
//
// Paths can be added as "C:\\path\\to\\dir", but forward slashes
// ("C:/path/to/dir") will also work.
//
// The default buffer size is 64K, which is the largest value that is guaranteed
// to work with SMB filesystems. If you have many events in quick succession
// this may not be enough, and you will have to use [WithBufferSize] to increase
// the value.
EOF
)

new=$(<<EOF
// NewWatcher creates a new Watcher.
EOF
)

add=$(<<EOF
// Add starts monitoring the path for changes.
//
// A path can only be watched once; watching it more than once is a no-op and will
// not return an error. Paths that do not yet exist on the filesystem cannot
// watched.
//
// A watch will be automatically removed if the watched path is deleted or
// renamed. The exception is the Windows backend, which doesn't remove the
// watcher on renames.
//
// Notifications on network filesystems (NFS, SMB, FUSE, etc.) or special
// filesystems (/proc, /sys, etc.) generally don't work.
//
// Returns [ErrClosed] if [Watcher.Close] was called.
//
// See [AddWith] for a version that allows adding options.
//
// # Watching directories
//
// All files in a directory are monitored, including new files that are created
// after the watcher is started. By default subdirectories are not watched (i.e.
// it's non-recursive), but if the path ends with "/..." all files and
// subdirectories are watched too.
//
// # Watching files
//
// Watching individual files (rather than directories) is generally not
// recommended as many tools update files atomically. Instead of "just" writing
// to the file a temporary file will be written to first, and if successful the
// temporary file is moved to to destination removing the original, or some
// variant thereof. The watcher on the original file is now lost, as it no
// longer exists.
//
// Instead, watch the parent directory and use Event.Name to filter out files
// you're not interested in. There is an example of this in [cmd/fsnotify/file.go].
EOF
)

addwith=$(<<EOF
// AddWith is like [Add], but allows adding options. When using Add() the
// defaults described below are used.
//
// Possible options are:
//
//   - [WithBufferSize] sets the buffer size for the Windows backend; no-op on
//     other platforms. The default is 64K (65536 bytes).
EOF
)

remove=$(<<EOF
// Remove stops monitoring the path for changes.
//
// If the path was added as a recursive watch (e.g. as "/tmp/dir/...") then the
// entire recursive watch will be removed. You can use either "/tmp/dir" or
// "/tmp/dir/..." (they behave identically).
//
// You cannot remove individual files or subdirectories from recursive watches;
// e.g. Add("/tmp/path/...") and then Remove("/tmp/path/sub") will fail.
//
// For other watches directories are removed non-recursively. For example, if
// you added "/tmp/dir" and "/tmp/dir/subdir" then you will need to remove both.
//
// Removing a path that has not yet been added returns [ErrNonExistentWatch].
//
// Returns nil if [Watcher.Close] was called.
EOF
)

close=$(<<EOF
// Close removes all watches and closes the events channel.
EOF
)

watchlist=$(<<EOF
// WatchList returns all paths added with [Add] (and are not yet removed).
//
// Returns nil if [Watcher.Close] was called.
EOF
)

events=$(<<EOF
	// Events sends the filesystem change events.
	//
	// fsnotify can send the following events; a "path" here can refer to a
	// file, directory, symbolic link, or special file like a FIFO.
	//
	//   fsnotify.Create    A new path was created; this may be followed by one
	//                      or more Write events if data also gets written to a
	//                      file.
	//
	//   fsnotify.Remove    A path was removed.
	//
	//   fsnotify.Rename    A path was renamed. A rename is always sent with the
	//                      old path as Event.Name, and a Create event will be
	//                      sent with the new name. Renames are only sent for
	//                      paths that are currently watched; e.g. moving an
	//                      unmonitored file into a monitored directory will
	//                      show up as just a Create. Similarly, renaming a file
	//                      to outside a monitored directory will show up as
	//                      only a Rename.
	//
	//   fsnotify.Write     A file or named pipe was written to. A Truncate will
	//                      also trigger a Write. A single "write action"
	//                      initiated by the user may show up as one or multiple
	//                      writes, depending on when the system syncs things to
	//                      disk. For example when compiling a large Go program
	//                      you may get hundreds of Write events, so you
	//                      probably want to wait until you've stopped receiving
	//                      them (see the dedup example in cmd/fsnotify).
	//                      Some systems may send Write event for directories
	//                      when the directory content changes.
	//
	//   fsnotify.Chmod     Attributes were changed. On Linux this is also sent
	//                      when a file is removed (or more accurately, when a
	//                      link to an inode is removed). On kqueue it's sent
	//                      and on kqueue when a file is truncated. On Windows
	//                      it's never sent.
EOF
)

errors=$(<<EOF
	// Errors sends any errors.
	//
	// [ErrEventOverflow] is used to indicate there are too many events:
	//
	//  - inotify: there are too many queued events (fs.inotify.max_queued_events sysctl)
	//  - windows: The buffer size is too small; [WithBufferSize] can be used to increase it.
	//  - kqueue, fen: not used.
EOF
)

set-cmt() {
	local pat=$1
	local cmt=$2

	IFS=$'\n' local files=($(grep -n $pat backend_*~*_test.go))
	for f in $files; do
		IFS=':' local fields=($=f)
		local file=$fields[1]
		local end=$(( $fields[2] - 1 ))

		# Find start of comment.
		local start=0
		IFS=$'\n' local lines=($(head -n$end $file))
		for (( i = 1; i <= $#lines; i++ )); do
			local line=$lines[-$i]
			if ! grep -q '^[[:space:]]*//' <<<$line; then
				start=$(( end - (i - 2) ))
				break
			fi
		done

		head -n $(( start - 1 )) $file  >/tmp/x
		print -r -- $cmt                >>/tmp/x
		tail -n+$(( end + 1 ))   $file  >>/tmp/x
		mv /tmp/x $file
	done
}

set-cmt '^type Watcher struct '             $watcher
set-cmt '^func NewWatcher('                 $new
set-cmt '^func (w \*Watcher) Add('          $add
set-cmt '^func (w \*Watcher) AddWith('      $addwith
set-cmt '^func (w \*Watcher) Remove('       $remove
set-cmt '^func (w \*Watcher) Close('        $close
set-cmt '^func (w \*Watcher) WatchList('    $watchlist
set-cmt '^[[:space:]]*Events *chan Event$'  $events
set-cmt '^[[:space:]]*Errors *chan error$'  $errors