Error: espflash::connection_failed #615

antonsterkhov · 2024-03-13T20:36:51Z

Error

Finished dev [optimized + debuginfo] target(s) in 0.30s
Running espflash flash --monitor target\xtensa-esp32-none-elf\debug\esp32v1
[2024-03-13T20:22:15Z INFO ] Serial port: 'COM7'
[2024-03-13T20:22:15Z INFO ] Connecting...
Error: espflash::connection_failed

Version

PS C:\esp32v1> espflash -V
espflash 3.0.0

Windows

Windows 10 Pro 22H2

Driver UART

Silicon Labs CP210x USB to UART Bridge

esptool work

Serial port COM7
Connecting.......
Detecting chip type... Unsupported detection protocol, switching and trying again...
Connecting...
Detecting chip type... ESP32
Chip is ESP32-D0WDQ6 (revision v1.0)
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
Crystal is 40MHz
MAC: c8:c9:a3:c3:73:fc
Uploading stub...
Running stub...
Stub running...
Erasing flash (this may take a while)...
Chip erase completed successfully in 2.0s
Hard resetting via RTS pin...

Version 2.1.0 work

SergioGasquez · 2024-03-14T08:49:26Z

I don't usually use Windows, but just tried reproducing your issue, and I was able to flash my ESP32:

esp32 on  main [?] is 📦 v0.1.0 via 🦀 v1.76.0-nightly took 6s
❯ cargo r
    Finished dev [optimized + debuginfo] target(s) in 0.12s
     Running `espflash flash --monitor --no-stub target\xtensa-esp32-none-elf\debug\esp32`
[2024-03-14T08:45:05Z INFO ] Detected 2 serial ports
[2024-03-14T08:45:05Z INFO ] Ports which match a known common dev board are highlighted
[2024-03-14T08:45:05Z INFO ] Please select a port
[2024-03-14T08:45:06Z INFO ] Serial port: 'COM10'
[2024-03-14T08:45:06Z INFO ] Connecting...
Chip type:         esp32 (revision v3.0)
Crystal frequency: 40 MHz
Flash size:        4MB
Features:          WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
MAC address:       8c:4b:14:15:a8:a4
App/part. size:    83,856/4,128,768 bytes, 2.03%
[00:00:01] [========================================]      17/17      0x1000                                                                                                                                                                                               
[00:00:00] [========================================]       1/1       0x8000                                                                                                                                                                                               
[00:00:02] [========================================]      20/20      0x10000                                                                                                                                                                                              
[2024-03-14T08:45:13Z INFO ] Flashing has completed!
Commands:
    CTRL+R    Reset chip
    CTRL+C    Exit

ets Jul 29 2019 12:21:46

rst:0x1 (POWERON_RESET),boot:0x12 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:7104
load:0x40078000,len:15576
load:0x40080400,len:4
ho 8 tail 4 room 4
load:0x40080404,len:3876
entry 0x4008064c
0x4008064c - esp_hal::interrupt::xtensa::vectored::get_configured_interrupts
    at C:\Users\sergi\.cargo\registry\src\index.crates.io-6f17d22bba15001f\esp-hal-0.16.1\src\interrupt\xtensa.rs:291
I (31) boot: ESP-IDF v5.1-beta1-378-gea5e0ff298-dirt 2nd stage bootloader
I (31) boot: compile time Jun  7 2023 07:48:23
I (33) boot: Multicore bootloader
I (37) boot: chip revision: v3.0
I (42) boot.esp32: SPI Speed      : 40MHz
I (46) boot.esp32: SPI Mode       : DIO
I (50) boot.esp32: SPI Flash Size : 4MB
I (55) boot: Enabling RNG early entropy source...
I (60) boot: Partition Table:
I (64) boot: ## Label            Usage          Type ST Offset   Length
I (71) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (79) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (86) boot:  2 factory          factory app      00 00 00010000 003f0000
I (94) boot: End of partition table
I (98) esp_image: segment 0: paddr=00010020 vaddr=3f400020 size=03014h ( 12308) map
I (111) esp_image: segment 1: paddr=0001303c vaddr=3ffb0000 size=00004h (     4) load
I (115) esp_image: segment 2: paddr=00013048 vaddr=40080000 size=015ech (  5612) load
I (126) esp_image: segment 3: paddr=0001463c vaddr=00000000 size=0b9dch ( 47580)
I (149) esp_image: segment 4: paddr=00020020 vaddr=400d0020 size=04744h ( 18244) map
I (156) boot: Loaded app from partition at offset 0x10000
I (156) boot: Disabling RNG early entropy source...
Hello world!
Loop...
Loop...
Loop...

esp32 on  main [?] is 📦 v0.1.0 via 🦀 v1.76.0-nightly took 10s
❯ espflash --version
espflash 3.0.0

It has an FTDI USB to UART bridge

antonsterkhov · 2024-03-14T09:16:47Z

I think this is all due to the waiting time for a response? Since in version 2.1.0 everything is ok. Is it possible to somehow increase the time based on version 2.1.0.

SergioGasquez · 2024-03-14T09:38:32Z

Can you enable debug logs? RUST_LOG=debug espflash flash --monitor target\xtensa-esp32-none-elf\debug\esp32v1 or RUST_LOG=debug cargo r

I think this is all due to the waiting time for a response? Since in version 2.1.0 everything is ok. Is it possible to somehow increase the time based on version 2.1.0

Sorry, what time are you referring to? Timeouts diff between 3.0.0 and 2.1.0: https://github.com/esp-rs/espflash/compare/v2.1.0..v3.0.0#diff-6da039671d40a74ed662a6c7179f47cf6cebb08f9111e54629b3b87b37b5dd12

SergioGasquez · 2024-03-14T09:53:44Z

Also, mind sharing the devkit that you are using?

antonsterkhov · 2024-03-14T09:56:26Z

Also, mind sharing the devkit that you are using?

I have my own board based on the ESP32 Wroom 32 chip

SergioGasquez · 2024-03-14T10:47:30Z

Can you enable debug logs? RUST_LOG=debug espflash flash --monitor target\xtensa-esp32-none-elf\debug\esp32v1 or RUST_LOG=debug cargo r

I think this is all due to the waiting time for a response? Since in version 2.1.0 everything is ok. Is it possible to somehow increase the time based on version 2.1.0

Sorry, what time are you referring to? Timeouts diff between 3.0.0 and 2.1.0: https://github.com/esp-rs/espflash/compare/v2.1.0..v3.0.0#diff-6da039671d40a74ed662a6c7179f47cf6cebb08f9111e54629b3b87b37b5dd12

Can you answer this?

antonsterkhov · 2024-03-14T13:07:52Z

I think it's here
fn calc_timeout(timeout_per_mb: Duration, size: u32) -> Duration { let mb = size as f64 / 1_000_000.0; std::cmp::max( DEFAULT_TIMEOUT, FLASH_DEFLATE_END_TIMEOUT, Duration::from_millis((timeout_per_mb.as_millis() as f64 * mb) as u64), ) }

SergioGasquez · 2024-03-14T14:43:10Z

I think it's here fn calc_timeout(timeout_per_mb: Duration, size: u32) -> Duration { let mb = size as f64 / 1_000_000.0; std::cmp::max( DEFAULT_TIMEOUT, FLASH_DEFLATE_END_TIMEOUT, Duration::from_millis((timeout_per_mb.as_millis() as f64 * mb) as u64), ) }

Can you try increasing that timeout and see if it solves the issue? I could create a quick branch with the timeout increased if you prefer.

Also, could you post the output of RUST_LOG=debug espflash flash --monitor target\xtensa-esp32-none-elf\debug\esp32v1 or RUST_LOG=debug cargo r?

antonsterkhov · 2024-03-14T16:05:51Z

I think it's here fn calc_timeout(timeout_per_mb: Duration, size: u32) -> Duration { let mb = size as f64 / 1_000_000.0; std::cmp::max( DEFAULT_TIMEOUT, FLASH_DEFLATE_END_TIMEOUT, Duration::from_millis((timeout_per_mb.as_millis() as f64 * mb) as u64), ) }

Can you try increasing that timeout and see if it solves the issue? I could create a quick branch with the timeout increased if you prefer.

Also, could you post the output of RUST_LOG=debug espflash flash --monitor target\xtensa-esp32-none-elf\debug\esp32v1 or RUST_LOG=debug cargo r?

I can’t start logging and I don’t understand why it crashes. I think we should set it to 3 seconds instead of 10

SergioGasquez · 2024-03-14T19:33:11Z

I can’t start logging and I don’t understand why it crashes.

What do you mean?

I think we should set it to 3 seconds instead of 10

But that would make it timeout even earlier. Anyway, I just made a branch with your suggested change to see if it solves the issue, mind installing espflash from it and see if it solves it:

cargo install espflash --git https://github.com/SergioGasquez/espflash --branch /fix/windows-timeout

antonsterkhov · 2024-03-14T21:40:33Z

I can’t start logging and I don’t understand why it crashes.

What do you mean?

I think we should set it to 3 seconds instead of 10

But that would make it timeout even earlier. Anyway, I just made a branch with your suggested change to see if it solves the issue, mind installing espflash from it and see if it solves it:
cargo install espflash --git https://github.com/SergioGasquez/espflash --branch /fix/windows-timeout

No it didn't help

SergioGasquez · 2024-03-15T08:27:28Z

To be honest, I don't have much information right now and can't reproduce the issue, I would need you to share with me debug logs (RUST_LOG=debug espflash flash --monitor target\xtensa-esp32-none-elf\debug\esp32v1 or RUST_LOG=debug cargo r)

antonsterkhov · 2024-03-15T10:20:30Z

To be honest, I don't have much information right now and can't reproduce the issue, I would need you to share with me debug logs (RUST_LOG=debug espflash flash --monitor target\xtensa-esp32-none-elf\debug\esp32v1 or RUST_LOG=debug cargo r)

}
[2024-03-15T10:28:01Z DEBUG] Using Classic reset strategy with delay of 50ms
[2024-03-15T10:28:01Z DEBUG] Boot Mode: 0x13
[2024-03-15T10:28:01Z DEBUG] Download Mode: false
[2024-03-15T10:28:01Z DEBUG] Writing command: Sync
[2024-03-15T10:28:01Z DEBUG] Writing command: Sync
[2024-03-15T10:28:01Z DEBUG] Writing command: Sync
[2024-03-15T10:28:01Z DEBUG] Writing command: Sync
[2024-03-15T10:28:01Z DEBUG] Writing command: Sync
[2024-03-15T10:28:01Z DEBUG] Failed to reset, error Connection(
WrongBootMode(
"0x13",
),
), retrying
Error: espflash::connection_failed

SergioGasquez · 2024-03-15T11:21:05Z

The initial sync might be failing, it tires 5 times (the maximum) and also bootmode is not right. Few tests:

Have you tried using --no-stub? espflash flash --monitor target\xtensa-esp32-none-elf\debug\esp32v1 --no-stub or modifying the custom runner to add that flag.
Put the board in download mode: Hold the boot button and press the en button.
- If you dont have such buttons since you are using custom hw, see the corresponding pins.
Press the boot button while you run the espflash command

antonsterkhov · 2024-03-15T13:52:28Z

The initial sync might be failing, it tires 5 times (the maximum) and also bootmode is not right. Few tests:

Have you tried using --no-stub? espflash flash --monitor target\xtensa-esp32-none-elf\debug\esp32v1 --no-stub or modifying the custom runner to add that flag.

Put the board in download mode: Hold the boot button and press the en button.

If you dont have such buttons since you are using custom hw, see the corresponding pins.

Press the boot button while you run the espflash command

I do everything according to the instructions. But as I said earlier, everything works well with version 2.1.0. The monitor loads and works. I tried to check on the M5 Atom, and I also got a loading error.

on mac m1 version 3.0.0 works

SergioGasquez · 2024-03-18T09:10:35Z

Just to confirm: Have you also tried using --no-stub? espflash flash --monitor target\xtensa-esp32-none-elf\debug\esp32v1 --no-stub or modifying the custom runner to add that flag.

antonsterkhov · 2024-03-18T11:30:40Z

Just to confirm: Have you also tried using --no-stub? espflash flash --monitor target\xtensa-esp32-none-elf\debug\esp32v1 --no-stub or modifying the custom runner to add that flag.

doesn't work either

SergioGasquez · 2024-03-25T10:34:15Z

Maybe we can try connecting without resetting: Can you try using -b no-reset?

antonsterkhov · 2024-03-25T14:31:08Z

Maybe we can try connecting without resetting: Can you try using -b no-reset?

I tried it on the M5, it didn’t work, but my board, which didn’t require a reboot command, did.

antonsterkhov · 2024-03-25T15:33:51Z

I think there is a reason that it does not load in version 3, on the M5 atom there is an automatic reset and boot pull, but the time is probably different compared to version 2.1 - default-reset: Uses DTR & RTS serial control lines to try to reset the chip into. Although on the M1 Mac, version 3 loads normally with default downloads.

antonsterkhov closed this as completed Mar 14, 2024

antonsterkhov reopened this Mar 14, 2024

SergioGasquez self-assigned this Mar 14, 2024

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Error: espflash::connection_failed #615

Error: espflash::connection_failed #615

antonsterkhov commented Mar 13, 2024 •

edited

SergioGasquez commented Mar 14, 2024

antonsterkhov commented Mar 14, 2024

SergioGasquez commented Mar 14, 2024

SergioGasquez commented Mar 14, 2024

antonsterkhov commented Mar 14, 2024 •

edited

SergioGasquez commented Mar 14, 2024

antonsterkhov commented Mar 14, 2024 •

edited

SergioGasquez commented Mar 14, 2024

antonsterkhov commented Mar 14, 2024

SergioGasquez commented Mar 14, 2024

antonsterkhov commented Mar 14, 2024

SergioGasquez commented Mar 15, 2024

antonsterkhov commented Mar 15, 2024 •

edited

SergioGasquez commented Mar 15, 2024

antonsterkhov commented Mar 15, 2024 •

edited

SergioGasquez commented Mar 18, 2024

antonsterkhov commented Mar 18, 2024

SergioGasquez commented Mar 25, 2024

antonsterkhov commented Mar 25, 2024 •

edited

antonsterkhov commented Mar 25, 2024

Error: espflash::connection_failed #615

Error: espflash::connection_failed #615

Comments

antonsterkhov commented Mar 13, 2024 • edited

Error

Version

Windows

Driver UART

esptool work

Version 2.1.0 work

SergioGasquez commented Mar 14, 2024

antonsterkhov commented Mar 14, 2024

SergioGasquez commented Mar 14, 2024

SergioGasquez commented Mar 14, 2024

antonsterkhov commented Mar 14, 2024 • edited

SergioGasquez commented Mar 14, 2024

antonsterkhov commented Mar 14, 2024 • edited

SergioGasquez commented Mar 14, 2024

antonsterkhov commented Mar 14, 2024

SergioGasquez commented Mar 14, 2024

antonsterkhov commented Mar 14, 2024

SergioGasquez commented Mar 15, 2024

antonsterkhov commented Mar 15, 2024 • edited

SergioGasquez commented Mar 15, 2024

antonsterkhov commented Mar 15, 2024 • edited

SergioGasquez commented Mar 18, 2024

antonsterkhov commented Mar 18, 2024

SergioGasquez commented Mar 25, 2024

antonsterkhov commented Mar 25, 2024 • edited

antonsterkhov commented Mar 25, 2024

antonsterkhov commented Mar 13, 2024 •

edited

antonsterkhov commented Mar 14, 2024 •

edited

antonsterkhov commented Mar 14, 2024 •

edited

antonsterkhov commented Mar 15, 2024 •

edited

antonsterkhov commented Mar 15, 2024 •

edited

antonsterkhov commented Mar 25, 2024 •

edited