Skip to content

Latest commit

 

History

History
219 lines (192 loc) · 13.4 KB

apx-serverinfra.rst

File metadata and controls

219 lines (192 loc) · 13.4 KB

CernVM-FS Server Infrastructure

This section provides technical details on the CernVM-FS server setup including the infrastructure necessary for an individual repository. It is highly recommended to first consult ":ref:`sct_serveranatomy`" for a more general overview of the involved directory structure.

Prerequisites

A CernVM-FS server installation depends on the following environment setup and tools to be in place:

  • Appropriate kernel version. You must have ONE of the following:
    • kernel 4.2.x or later.
    • RHEL7.3 kernel (for OverlayFS)
  • Backend storage location available through HTTP
  • Backend storage accessible at /srv/cvmfs/... (unless stored on S3)
  • cvmfs and cvmfs-server packages installed

Local Backend Storage Infrastructure

CernVM-FS stores the entire repository content (file content and metadata catalogs) into a content addressable storage (CAS). This storage can either be a file system at /srv/cvmfs or an S3 compatible object storage system (see ":ref:`sct_s3storagesetup`" for details). In the former case the contents of /srv/cvmfs are as follows:

File Path Description
/srv/cvmfs Central repository storage location
Can be mounted or symlinked to another location before creating the first repository.
/srv/cvmfs/<fqrn> Storage location of a specific repository
Can be symlinked to another location before creating the repository <fqrn>. This location needs to be both writable by the repository owner and accessible through an HTTP server.
/srv/cvmfs/<fqrn>/.cvmfspublished Manifest file of the repository
The manifest provides the entry point into the repository. It is the only file that needs to be signed by the repository's private key.
/srv/cvmfs/<fqrn>/.cvmfswhitelist List of trusted repository certificates
Contains a list of certificate fingerprints that should be allowed to sign a repository manifest (see .cvmfspublished). The whitelist needs to be signed by a globally trusted private key.
/srv/cvmfs/<fqrn>/data CAS location of the repository
Data storage of the repository. Contains catalogs, files, file chunks, certificates and history databases in a content addressable file format. This directory and all its contents need to be writable by the repository owner.
/srv/cvmfs/<fqrn>/data/00..ff Second CAS level directories
Splits the flat CAS namespace into multiple directories. First two digits of the file content hash defines the directory the remainder is used as file name inside the corresponding directory.
/srv/cvmfs/<fqrn>/data/txn CAS transaction directory
Stores partial files during creation. Once writing has completed, the file is committed into the CAS using an atomic rename operation.

Server Spool Area of a Repository (Stratum0)

The spool area of a repository contains transaction infrastructure and scratch area of a Stratum0 or specifically a release manager machine installation. It is always located inside /var/spool/cvmfs with directories for individual repositories. Note that the data volume of the spool area can grow very large for massive repository updates since it contains the writable union file system branch and a CernVM-FS client cache directory.

File Path Description
/var/spool/cvmfs CernVM-FS server spool area
Contains administrative and scratch space for CernVM-FS repositories. This directory should only contain directories corresponding to individual CernVM-FS repositories.
/var/spool/cvmfs/<fqrn> Individual repository spool area
Contains the spool area of an individual repository and might temporarily contain large data volumes during massive repository updates. This location can be mounted or symlinked to other locations. Furthermore it must be writable by the repository owner.
/var/spool/cvmfs/<fqrn>/cache CernVM-FS client cache directory
Contains the cache of the CernVM-FS client mounting the r/o branch (i.e. /var/spool/cvmfs/<fqrn>/rdonly) of the union file system mount point located at /cvmfs/<fqrn>. The content of this directory is fully managed by the CernVM-FS client and hence must be configured as a CernVM-FS cache and writable for the repository owner.
/var/spool/cvmfs/<fqrn>/rdonly CernVM-FS client mount point
Serves as the mount point of the CernVM-FS client exposing the latest published state of the CernVM-FS repository. It needs to be owned by the repository owner and should be empty if CernVM-FS is not mounted to it.
/var/spool/cvmfs/<fqrn>/scratch Writable union file system scratch area
All file system changes applied to /cvmfs/<fqrn> during a transaction will be stored in this directory. Hence, it potentially needs to accommodate a large data volume during massive repository updates. Furthermore it needs to be writable by the repository owner.
/var/spool/cvmfs/<fqrn>/tmp Temporary scratch location
Some CernVM-FS server operations like publishing store temporary data files here, hence it needs to be writable by the repository owner. If the repository is idle this directory should be empty.
/var/spool/cvmfs/<fqrn>/client.config CernVM-FS client configuration
This contains client configuration variables for the CernVM-FS client mounted to /var/spool/cvmfs/<fqrn>/rdonly. Most notibly it needs to contain CVMFS_ROOT_HASH configured to the latest revision published in the corresponding repository. This file needs to be writable by the repository owner.

Repository Configuration Directory

The authoritative configuration of a CernVM-FS repository is located in /etc/cvmfs/repositories.d and should only be writable by the administrator. Furthermore, the repository's keychain is located in /etc/cvmfs/keys and follows the naming convention <fqrn>.crt for the certificate, <fqrn>.key for the repository's private key and <fqrn>.pub for the public key. All of those files can be symlinked somewhere else if necessary.

File Path Description
/etc/cvmfs/repositories.d CernVM-FS server config directory
This contains the configuration directories for individual CernVM-FS repositories. Note that this path is shortened using /.../repos.d/ in the rest of this table.
/.../repos.d/<fqrn> Config directory for specific repo
This contains the configuration files for one specific CernVM-FS repository server.
/.../repos.d/<fqrn>/server.conf Server configuration file
Authoriative configuration file for the CernVM-FS server tools. This file should only contain :ref:`valid server configuration variables <apxsct_serverparameters>` as it controls the behaviour of the CernVM-FS server operations like publishing, pulling and so forth.
/.../repos.d/<fqrn>/client.conf Client configuration file
Authoriative configuration file for the CernVM-FS client used to mount the latest revision of a Stratum 0 release manager machine. This file should only contain :ref:`valid client configuration variables <apxsct_clientparameters>`. This file must not exist for Stratum 1 repositories.
/.../repos.d/<fqrn>/replica.conf Replication configuration file
Contains configuration variables for Stratum 1 specific repositories. This file must not exist for Stratum 0 repositories.

Environment Setup

Apart from file and directory locations a CernVM-FS server installation depends on a few environment configurations. Most notably the possibility to access the backend storage through HTTP and to allow for mounting of both the CernVM-FS client at /var/spool/cvmfs/<fqrn>/rdonly and a union file system on /cvmfs/<fqrn>.

Granting HTTP access can happen in various ways and depends on the chosen backend storage type. For an S3 hosted backend storage, the CernVM-FS client can usually be directly pointed to the S3 bucket used for storage (see ":ref:`sct_s3storagesetup`" for details). In case of a local file system backend any web server can be used for this purpose. By default, CernVM-FS assumes Apache and uses that automatically.

Internally the CernVM-FS server uses a SUID binary (i.e. cvmfs_suid_helper) to manipulate its mount points. This is necessary since transactional CernVM-FS commands must be accessible to the repository owner that is usually different from root. Both the mount directives for /var/spool/cvmfs/<fqrn>/rdonly and /cvmfs/<fqrn> must be placed into /etc/fstab for this reason. By default, CernVM-FS uses the following entries for these mount points:

cvmfs2#<fqrn> /var/spool/cvmfs/<fqrn>/rdonly fuse \
allow_other,config=/etc/cvmfs/repositories.d/<fqrn>/client.conf: \
/var/spool/cvmfs/<fqrn>/client.local,cvmfs_suid 0 0

aufs_<fqrn> /cvmfs/<fqrn> aufs br=/var/spool/cvmfs/<fqrn>/scratch=rw: \
/var/spool/cvmfs/<fqrn>/rdonly=rr,udba=none,ro 0 0