- Repo: eslint/eslint
- Start Date: 2022-12-08
- RFC PR: eslint#100
- Authors: bmish
Provide users with more flexible, intuitive control over how unused disable directives are reported by supporting severity levels instead of just boolean values with CLI and config file options. Change the default behavior from off to warn on unused disable directives.
Outdated/unused ESLint disable directive comments (e.g. notConsole(); // eslint-disable-line no-console
) are currently a blind spot for most apps/repositories. These leftover comments cause clutter and confusion.
Detecting unused disable directive comments requires going out of one's way by using one of the following existing solutions:
- Running linting with
eslint --report-unused-disable-directives
(errors, but requires providing the CLI option whenever running ESLint) - Adding
reportUnusedDisableDirectives: true
to the.eslintrc.js
config file (warns, and thus easily ignored) - Enabling the third-party rule eslint-comments/no-unused-disable (errors, but requires a third-party plugin)
These existing solutions have various downsides:
- Lack of discoverability.
- Requires manual configuration to enable and thus not commonly used.
- Inability to treat unused disable directives as errors in shareable configs using the first-party options.
- Inconsistency in behavior between the CLI option and config file option of the same name which is unintuitive and causes confusion.
We propose a new "explicit severity" design where the user can set the severity level of unused disable directive reporting using either the CLI option or the config file option. As a result, the user should always be able to achieve the desired effect (off
/ warn
/ error
), regardless of where they set the option from (CLI option, config file option, or even from a shareable config).
We will also change the default behavior to warn on unused disable directives so that all users (unless they opt-out) will benefit from the detection (and automatic removal with --fix
) of unused disable directives.
How the new "explicit severity" design works:
- A new CLI option
--report-unused-disable-directives-severity <severity>
is added, while the existing CLI option--report-unused-disable-directives
remains in place untouched - If both CLI options
--report-unused-disable-directives
and--report-unused-disable-directives-severity <severity>
are provided, an error is thrown - The existing config file option
reportUnusedDisableDirectives
is updated to, in addition to the current boolean values, also accept standard severity level string values:off
,warn
,error
(or the corresponding number for each level) - If both the CLI and config file options are present, the CLI option takes precedence over (overrides) the config file option
- If only the CLI option is present, then it is used; if only the config file option is present, then it is used
- If neither the CLI nor config file options are present, the default value (
warn
) is used - Note: There's only one underlying setting, and the config and CLI options are just two different ways of controlling it
Allowed values for the config file option:
reportUnusedDisableDirectives: true
- same behavior as today (warn
)reportUnusedDisableDirectives: false
- same behavior as today (off
)reportUnusedDisableDirectives: "error"
- new value (or2
)reportUnusedDisableDirectives: "warn"
- new value (or1
)reportUnusedDisableDirectives: "off"
- new value (or0
)
Allowed values for the CLI options:
--report-unused-disable-directives
- existing option, same behavior as today (error
)--report-unused-disable-directives-severity error
- new option (or2
)--report-unused-disable-directives-severity warn
- new option (or1
)--report-unused-disable-directives-severity off
- new option (or0
)
The implementation of this RFC will likely involve two phases:
- Phase 1: Non-breaking changes to add support for the new severity levels.
- Phase 2: Any breaking changes for flat config users (
warn
by default, remove redundantreportUnusedDisableDirectives
option fromprocessOptions()
), suitable for a minor release prior to ESLint v9 since the flat config is not considered stable yet, or otherwise a major release.
This allows us to get the new functionality out to users as soon as possible as a smaller change with reduced risk, while also keeping the breaking change small and focused.
See this Draft PR of phase 1 code changes.
conf/default-cli-options.js
- default toundefined
for new CLI option--report-unused-disable-directives-severity
lib/cli.js
- convert--report-unused-disable-directives
and--report-unused-disable-directives-severity
toreportUnusedDisableDirectives
lib/config/default-config.js
- (phase 2, breaking change for flag config users) add new default value ofwarn
forreportUnusedDisableDirectives
config optionlib/config/flat-config-schema.js
- support boolean or severity value forlinterOptions.reportUnusedDisableDirectives
lib/eslint/eslint-helpers.js
- (phase 2, breaking change for flag config users) remove optionreportUnusedDisableDirectives
fromprocessOptions()
becauseoverrideConfig.reportUnusedDisableDirectives
can be used instead nowlib/eslint/eslint.js
- same change aslib/eslint/eslint-helpers.js
lib/linter/linter.js
- normalize severity or boolean forlinterOptions.reportUnusedDisableDirectives
to a severity stringlib/options.js
add new CLI option--report-unused-disable-directives-severity
tests/lib/cli.js
- test the CLI optionstests/lib/linter/linter.js
- test thereportUnusedDisableDirectives
config option
These documentation pages will be updated to reflect the new option values and defaults:
- Configuration Files
- Configuring Rules
- Command Line Interface
- Node.js API
eslint --help
Documentation will focus on the new severity level values as opposed to the boolean values. We may choose to leave the boolean values undocumented in some places, or add a note that they are deprecated and remain in place only for backwards compatibility, similar to the note in the globals configuration section that says:
For historical reasons, the boolean value false and the string value "readable" are equivalent to "readonly". Similarly, the boolean value true and the string value "writeable" are equivalent to "writable". However, the use of these older values is deprecated.
- While we attempted to limit the breaking changes involved, any amount of breaking changes can still be disruptive.
- Some users may not like the new default behavior of warning on unused disable directives and will be burdened by having to opt-out.
- The new warnings can be easily ignored and some may prefer to only use warnings temporarily.
- Keeping around the boolean values for backwards compatibility means increased complexity in supporting both boolean and severity level values. It also means we still have the inconsistency where
reportUnusedDisableDirectives: true
meanswarn
but--report-unused-disable-directives
meanserror
.
Users that already specify reportUnusedDisableDirectives
or --report-unused-disable-directives
will not experience any breaking changes, as the current behavior will be maintained.
Users that do not specify any of these options but do specify --max-warnings
will experience a breaking change, as the additional warnings could cause ESLint to exit with a non-zero exit code.
Users that do not specify any of these options are less likely to experience a breaking change, as additional warnings will simply show up as output text. Note that this could still be a breaking change if the user cares about ESLint's exact output text to stdout, or that running with --fix
will now fix the new warnings.
We don't need tweak our semantic versioning policy (discussed more in Alternatives), as the policy will only be violated (i.e. patch releases can break CI) if the user opts-in by setting one of the options to error
.
-
Leave as-is. But this means continued lack of configuration flexibility and discoverability of unused disable directives.
-
Remove boolean values for configuration options. We decided against this because it's a breaking change that could be too disruptive for users, and the overhead of supporting both booleans and severity levels is limited.
-
Adopt new option design but use
error
as the default behavior. We decided against this because causing CI to fail due to unused disable directives could be too disruptive to users and violates the current semantic versioning policy:Patch release (intended to not break your lint build)
A bug fix in a rule that results in ESLint reporting fewer linting errors. ...
Minor release (might break your lint build)
A bug fix in a rule that results in ESLint reporting more linting errors. ...
- eslint/eslint#12703 (comment)
If we allowed for errors to be reported with reportUnusedDisableDirectives, we would limit what kind of changes we could publish in a semver-patch release (since fixing a bug that would result in fewer errors could create additional unused disable directives).
- eslint/eslint#14699 (comment)
...because of our semver policy, which says that bug fixes that produce fewer errors should not break builds.
- eslint/eslint#12703 (comment)
-
Adopt new option design but use
off
as the default behavior. This would maintain the existing behavior for the majority of users who aren't reporting unused violations. But most users would continue to miss out on the benefit of this feature then. -
Turn
reportUnusedDisableDirectives
into a regular ESLint rule as suggested in #13104. While this could enable us to reduce complexity by eliminating a config option, a new rule implementing this feature may require special case handling, and it's not clear it's possible to implement within the current architecture. It's also a larger breaking change.
I am open to implementing this.
- eslint/eslint#15466 - the issue triggering this RFC
- eslint/eslint#9382 - very similar earlier proposal with
reportUnusedDisableDirectives
accepting a severity level - eslint#22 - previous RFC to allow
reportUnusedDisableDirectives
in config files