Associates a subnet in your VPC or an internet gateway or virtual private gateway attached to your VPC with a route table in your VPC. This association causes traffic from the subnet or gateway to be routed according to the routes in the route table. The action returns an association ID, which you need in order to disassociate the route table later. A route table can be associated with multiple subnets.
For more information, see Route tables in the Amazon Virtual Private Cloud User Guide.
", "AssociateSubnetCidrBlock": "Associates a CIDR block with your subnet. You can only associate a single IPv6 CIDR block with your subnet. An IPv6 CIDR block must have a prefix length of /64.
", "AssociateTransitGatewayMulticastDomain": "Associates the specified subnets and transit gateway attachments with the specified transit gateway multicast domain.
The transit gateway attachment must be in the available state before you can add a resource. Use DescribeTransitGatewayAttachments to see the state of the attachment.
", + "AssociateTransitGatewayPolicyTable": "Associates the specified transit gateway attachment with a transit gateway policy table.
", "AssociateTransitGatewayRouteTable": "Associates the specified attachment with the specified transit gateway route table. You can associate only one route table with an attachment.
", "AssociateTrunkInterface": "This API action is currently in limited preview only. If you are interested in using this feature, contact your account manager.
Associates a branch network interface with a trunk network interface.
Before you create the association, run the create-network-interface command and set --interface-type to trunk. You must also create a network interface for each branch network interface that you want to associate with the trunk network interface.
Associates a CIDR block with your VPC. You can associate a secondary IPv4 CIDR block, an Amazon-provided IPv6 CIDR block, or an IPv6 CIDR block from an IPv6 address pool that you provisioned through bring your own IP addresses (BYOIP). The IPv6 CIDR block size is fixed at /56.
You must specify one of the following in the request: an IPv4 CIDR block, an IPv6 pool, or an Amazon-provided IPv6 CIDR block.
For more information about associating CIDR blocks with your VPC and applicable restrictions, see VPC and subnet sizing in the Amazon Virtual Private Cloud User Guide.
", @@ -105,10 +106,12 @@ "CreateTransitGatewayConnect": "Creates a Connect attachment from a specified transit gateway attachment. A Connect attachment is a GRE-based tunnel attachment that you can use to establish a connection between a transit gateway and an appliance.
A Connect attachment uses an existing VPC or Amazon Web Services Direct Connect attachment as the underlying transport mechanism.
", "CreateTransitGatewayConnectPeer": "Creates a Connect peer for a specified transit gateway Connect attachment between a transit gateway and an appliance.
The peer address and transit gateway address must be the same IP address family (IPv4 or IPv6).
For more information, see Connect peers in the Transit Gateways Guide.
", "CreateTransitGatewayMulticastDomain": "Creates a multicast domain using the specified transit gateway.
The transit gateway must be in the available state before you create a domain. Use DescribeTransitGateways to see the state of transit gateway.
", - "CreateTransitGatewayPeeringAttachment": "Requests a transit gateway peering attachment between the specified transit gateway (requester) and a peer transit gateway (accepter). The peer transit gateway can be in your account or a different Amazon Web Services account.
After you create the peering attachment, the owner of the accepter transit gateway must accept the attachment request.
", + "CreateTransitGatewayPeeringAttachment": "Requests a transit gateway peering attachment between the specified transit gateway (requester) and a peer transit gateway (accepter). The transit gateways must be in different Regions. The peer transit gateway can be in your account or a different Amazon Web Services account.
After you create the peering attachment, the owner of the accepter transit gateway must accept the attachment request.
", + "CreateTransitGatewayPolicyTable": "Creates a transit gateway policy table.
", "CreateTransitGatewayPrefixListReference": "Creates a reference (route) to a prefix list in a specified transit gateway route table.
", "CreateTransitGatewayRoute": "Creates a static route for the specified transit gateway route table.
", "CreateTransitGatewayRouteTable": "Creates a route table for the specified transit gateway.
", + "CreateTransitGatewayRouteTableAnnouncement": "Advertises a new transit gateway route table.
", "CreateTransitGatewayVpcAttachment": "Attaches the specified VPC to the specified transit gateway.
If you attach a VPC with a CIDR range that overlaps the CIDR range of a VPC that is already attached, the new VPC CIDR range is not propagated to the default propagation route table.
To send VPC traffic to an attached transit gateway, add a route to the VPC route table using CreateRoute.
", "CreateVolume": "Creates an EBS volume that can be attached to an instance in the same Availability Zone.
You can create a new empty volume or restore a volume from an EBS snapshot. Any Amazon Web Services Marketplace product codes from the snapshot are propagated to the volume.
You can create encrypted volumes. Encrypted volumes must be attached to instances that support Amazon EBS encryption. Volumes that are created from encrypted snapshots are also automatically encrypted. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
You can tag your volumes during creation. For more information, see Tag your Amazon EC2 resources in the Amazon Elastic Compute Cloud User Guide.
For more information, see Create an Amazon EBS volume in the Amazon Elastic Compute Cloud User Guide.
", "CreateVpc": "Creates a VPC with the specified IPv4 CIDR block. The smallest VPC you can create uses a /28 netmask (16 IPv4 addresses), and the largest uses a /16 netmask (65,536 IPv4 addresses). For more information about how large to make your VPC, see Your VPC and subnets in the Amazon Virtual Private Cloud User Guide.
You can optionally request an IPv6 CIDR block for the VPC. You can request an Amazon-provided IPv6 CIDR block from Amazon's pool of IPv6 addresses, or an IPv6 CIDR block from an IPv6 address pool that you provisioned through bring your own IP addresses (BYOIP).
By default, each instance you launch in the VPC has the default DHCP options, which include only a default DNS server that we provide (AmazonProvidedDNS). For more information, see DHCP options sets in the Amazon Virtual Private Cloud User Guide.
You can specify the instance tenancy value for the VPC when you create it. You can't change this value for the VPC after you create it. For more information, see Dedicated Instances in the Amazon Elastic Compute Cloud User Guide.
", @@ -168,9 +171,11 @@ "DeleteTransitGatewayConnectPeer": "Deletes the specified Connect peer.
", "DeleteTransitGatewayMulticastDomain": "Deletes the specified transit gateway multicast domain.
", "DeleteTransitGatewayPeeringAttachment": "Deletes a transit gateway peering attachment.
", + "DeleteTransitGatewayPolicyTable": "Deletes the specified transit gateway policy table.
", "DeleteTransitGatewayPrefixListReference": "Deletes a reference (route) to a prefix list in a specified transit gateway route table.
", "DeleteTransitGatewayRoute": "Deletes the specified route from the specified transit gateway route table.
", "DeleteTransitGatewayRouteTable": "Deletes the specified transit gateway route table. You must disassociate the route table from any transit gateway route tables before you can delete it.
", + "DeleteTransitGatewayRouteTableAnnouncement": "Advertises to the transit gateway that a transit gateway route table is deleted.
", "DeleteTransitGatewayVpcAttachment": "Deletes the specified VPC attachment.
", "DeleteVolume": "Deletes the specified EBS volume. The volume must be in the available state (not attached to an instance).
The volume can remain in the deleting state for several minutes.
For more information, see Delete an Amazon EBS volume in the Amazon Elastic Compute Cloud User Guide.
", "DeleteVpc": "Deletes the specified VPC. You must detach or delete all gateways and resources that are associated with the VPC before you can delete it. For example, you must terminate all instances running in the VPC, delete all security groups associated with the VPC (except the default one), delete all route tables associated with the VPC (except the default one), and so on.
", @@ -300,6 +305,8 @@ "DescribeTransitGatewayConnects": "Describes one or more Connect attachments.
", "DescribeTransitGatewayMulticastDomains": "Describes one or more transit gateway multicast domains.
", "DescribeTransitGatewayPeeringAttachments": "Describes your transit gateway peering attachments.
", + "DescribeTransitGatewayPolicyTables": "Describes one or more transit gateway route policy tables.
", + "DescribeTransitGatewayRouteTableAnnouncements": "Describes one or more transit gateway route table advertisements.
", "DescribeTransitGatewayRouteTables": "Describes one or more transit gateway route tables. By default, all transit gateway route tables are described. Alternatively, you can filter the results.
", "DescribeTransitGatewayVpcAttachments": "Describes one or more VPC attachments. By default, all VPC attachments are described. Alternatively, you can filter the results.
", "DescribeTransitGateways": "Describes one or more transit gateways. By default, all transit gateways are described. Alternatively, you can filter the results.
", @@ -344,6 +351,7 @@ "DisassociateRouteTable": "Disassociates a subnet or gateway from a route table.
After you perform this action, the subnet no longer uses the routes in the route table. Instead, it uses the routes in the VPC's main route table. For more information about route tables, see Route tables in the Amazon Virtual Private Cloud User Guide.
", "DisassociateSubnetCidrBlock": "Disassociates a CIDR block from a subnet. Currently, you can disassociate an IPv6 CIDR block only. You must detach or delete all gateways and resources that are associated with the CIDR block before you can disassociate it.
", "DisassociateTransitGatewayMulticastDomain": "Disassociates the specified subnets from the transit gateway multicast domain.
", + "DisassociateTransitGatewayPolicyTable": "Removes the association between an an attachment and a policy table.
", "DisassociateTransitGatewayRouteTable": "Disassociates a resource attachment from a transit gateway route table.
", "DisassociateTrunkInterface": "This API action is currently in limited preview only. If you are interested in using this feature, contact your account manager.
Removes an association between a branch network interface with a trunk network interface.
", "DisassociateVpcCidrBlock": "Disassociates a CIDR block from a VPC. To disassociate the CIDR block, you must specify its association ID. You can get the association ID by using DescribeVpcs. You must detach or delete all gateways and resources that are associated with the CIDR block before you can disassociate it.
You cannot disassociate the CIDR block with which you originally created the VPC (the primary CIDR block).
", @@ -392,6 +400,8 @@ "GetSubnetCidrReservations": "Gets information about the subnet CIDR reservations.
", "GetTransitGatewayAttachmentPropagations": "Lists the route tables to which the specified resource attachment propagates routes.
", "GetTransitGatewayMulticastDomainAssociations": "Gets information about the associations for the transit gateway multicast domain.
", + "GetTransitGatewayPolicyTableAssociations": "Gets a list of the transit gateway policy table associations.
", + "GetTransitGatewayPolicyTableEntries": "Returns a list of transit gateway policy table entries.
", "GetTransitGatewayPrefixListReferences": "Gets information about the prefix list references in a specified transit gateway route table.
", "GetTransitGatewayRouteTableAssociations": "Gets information about the associations for the specified transit gateway route table.
", "GetTransitGatewayRouteTablePropagations": "Gets information about the route table propagations for the specified transit gateway route table.
", @@ -1207,6 +1217,16 @@ "refs": { } }, + "AssociateTransitGatewayPolicyTableRequest": { + "base": null, + "refs": { + } + }, + "AssociateTransitGatewayPolicyTableResult": { + "base": null, + "refs": { + } + }, "AssociateTransitGatewayRouteTableRequest": { "base": null, "refs": { @@ -1660,6 +1680,7 @@ "AssociateInstanceEventWindowRequest$DryRun": "Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Requests an Amazon-provided IPv6 CIDR block with a /56 prefix length for the VPC. You cannot specify the range of IPv6 addresses, or the size of the CIDR block.
", @@ -1770,11 +1791,13 @@ "CreateTransitGatewayConnectRequest$DryRun": "Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Indicates whether to drop traffic that matches this route.
", "CreateTransitGatewayPrefixListReferenceRequest$DryRun": "Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Indicates whether to drop traffic that matches this route.
", "CreateTransitGatewayRouteRequest$DryRun": "Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Indicates whether the volume should be encrypted. The effect of setting the encryption state to true depends on the volume origin (new or from a snapshot), starting encryption state, ownership, and whether encryption by default is enabled. For more information, see Encryption by default in the Amazon Elastic Compute Cloud User Guide.
Encrypted Amazon EBS volumes must be attached to instances that support Amazon EBS encryption. For more information, see Supported instance types.
", @@ -1847,9 +1870,11 @@ "DeleteTransitGatewayConnectRequest$DryRun": "Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Returns true if the request succeeds; otherwise, it returns an error.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
The creation time.
", "TransitGatewayMulticastDomain$CreationTime": "The time the transit gateway multicast domain was created.
", "TransitGatewayPeeringAttachment$CreationTime": "The time the transit gateway peering attachment was created.
", + "TransitGatewayPolicyTable$CreationTime": "The timestamp when the transit gateway policy table was created.
", "TransitGatewayRouteTable$CreationTime": "The creation time.
", + "TransitGatewayRouteTableAnnouncement$CreationTime": "The timestamp when the transit gateway route table announcement was created.
", "TransitGatewayVpcAttachment$CreationTime": "The creation time.
", "VgwTelemetry$LastStatusChange": "The date and time of the last change in status.
", "Volume$CreateTime": "The time stamp when volume creation was initiated.
", @@ -4875,6 +4933,16 @@ "refs": { } }, + "DeleteTransitGatewayPolicyTableRequest": { + "base": null, + "refs": { + } + }, + "DeleteTransitGatewayPolicyTableResult": { + "base": null, + "refs": { + } + }, "DeleteTransitGatewayPrefixListReferenceRequest": { "base": null, "refs": { @@ -4905,6 +4973,16 @@ "refs": { } }, + "DeleteTransitGatewayRouteTableAnnouncementRequest": { + "base": null, + "refs": { + } + }, + "DeleteTransitGatewayRouteTableAnnouncementResult": { + "base": null, + "refs": { + } + }, "DeleteTransitGatewayRouteTableRequest": { "base": null, "refs": { @@ -6465,6 +6543,26 @@ "refs": { } }, + "DescribeTransitGatewayPolicyTablesRequest": { + "base": null, + "refs": { + } + }, + "DescribeTransitGatewayPolicyTablesResult": { + "base": null, + "refs": { + } + }, + "DescribeTransitGatewayRouteTableAnnouncementsRequest": { + "base": null, + "refs": { + } + }, + "DescribeTransitGatewayRouteTableAnnouncementsResult": { + "base": null, + "refs": { + } + }, "DescribeTransitGatewayRouteTablesRequest": { "base": null, "refs": { @@ -7025,6 +7123,16 @@ "refs": { } }, + "DisassociateTransitGatewayPolicyTableRequest": { + "base": null, + "refs": { + } + }, + "DisassociateTransitGatewayPolicyTableResult": { + "base": null, + "refs": { + } + }, "DisassociateTransitGatewayRouteTableRequest": { "base": null, "refs": { @@ -7237,6 +7345,13 @@ "ReservationFleetInstanceSpecification$Weight": "The number of capacity units provided by the specified instance type. This value, together with the total target capacity that you specify for the Fleet determine the number of instances for which the Fleet reserves capacity. Both values are based on units that make sense for your workload. For more information, see Total target capacity in the Amazon EC2 User Guide.
" } }, + "DynamicRoutingValue": { + "base": null, + "refs": { + "CreateTransitGatewayPeeringAttachmentRequestOptions$DynamicRouting": null, + "TransitGatewayPeeringAttachmentOptions$DynamicRouting": null + } + }, "EbsBlockDevice": { "base": "Describes a block device for an EBS volume.
", "refs": { @@ -8026,6 +8141,8 @@ "DescribeTransitGatewayConnectsRequest$Filters": "One or more filters. The possible values are:
options.protocol - The tunnel protocol (gre).
state - The state of the attachment (initiating | initiatingRequest | pendingAcceptance | rollingBack | pending | available | modifying | deleting | deleted | failed | rejected | rejecting | failing).
transit-gateway-attachment-id - The ID of the Connect attachment.
transit-gateway-id - The ID of the transit gateway.
transport-transit-gateway-attachment-id - The ID of the transit gateway attachment from which the Connect attachment was created.
One or more filters. The possible values are:
state - The state of the transit gateway multicast domain. Valid values are pending | available | deleting | deleted.
transit-gateway-id - The ID of the transit gateway.
transit-gateway-multicast-domain-id - The ID of the transit gateway multicast domain.
One or more filters. The possible values are:
transit-gateway-attachment-id - The ID of the transit gateway attachment.
local-owner-id - The ID of your Amazon Web Services account.
remote-owner-id - The ID of the Amazon Web Services account in the remote Region that owns the transit gateway.
state - The state of the peering attachment. Valid values are available | deleted | deleting | failed | failing | initiatingRequest | modifying | pendingAcceptance | pending | rollingBack | rejected | rejecting).
tag:<key> - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.
tag-key - The key of a tag assigned to the resource. Use this filter to find all resources that have a tag with a specific key, regardless of the tag value.
transit-gateway-id - The ID of the transit gateway.
The filters associated with the transit gateway policy table.
", + "DescribeTransitGatewayRouteTableAnnouncementsRequest$Filters": "The filters associated with the transit gateway policy table.
", "DescribeTransitGatewayRouteTablesRequest$Filters": "One or more filters. The possible values are:
default-association-route-table - Indicates whether this is the default association route table for the transit gateway (true | false).
default-propagation-route-table - Indicates whether this is the default propagation route table for the transit gateway (true | false).
state - The state of the route table (available | deleting | deleted | pending).
transit-gateway-id - The ID of the transit gateway.
transit-gateway-route-table-id - The ID of the transit gateway route table.
One or more filters. The possible values are:
state - The state of the attachment. Valid values are available | deleted | deleting | failed | failing | initiatingRequest | modifying | pendingAcceptance | pending | rollingBack | rejected | rejecting.
transit-gateway-attachment-id - The ID of the attachment.
transit-gateway-id - The ID of the transit gateway.
vpc-id - The ID of the VPC.
One or more filters. The possible values are:
options.propagation-default-route-table-id - The ID of the default propagation route table.
options.amazon-side-asn - The private ASN for the Amazon side of a BGP session.
options.association-default-route-table-id - The ID of the default association route table.
options.auto-accept-shared-attachments - Indicates whether there is automatic acceptance of attachment requests (enable | disable).
options.default-route-table-association - Indicates whether resource attachments are automatically associated with the default association route table (enable | disable).
options.default-route-table-propagation - Indicates whether resource attachments automatically propagate routes to the default propagation route table (enable | disable).
options.dns-support - Indicates whether DNS support is enabled (enable | disable).
options.vpn-ecmp-support - Indicates whether Equal Cost Multipath Protocol support is enabled (enable | disable).
owner-id - The ID of the Amazon Web Services account that owns the transit gateway.
state - The state of the transit gateway (available | deleted | deleting | modifying | pending).
transit-gateway-id - The ID of the transit gateway.
One or more filters.
reservationType - The type of reservation (prefix | explicit).
subnet-id - The ID of the subnet.
tag:<key> - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.
tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.
One or more filters. The possible values are:
transit-gateway-route-table-id - The ID of the transit gateway route table.
One or more filters. The possible values are:
resource-id - The ID of the resource.
resource-type - The type of resource. The valid value is: vpc.
state - The state of the subnet association. Valid values are associated | associating | disassociated | disassociating.
subnet-id - The ID of the subnet.
transit-gateway-attachment-id - The id of the transit gateway attachment.
The filters associated with the transit gateway policy table.
", + "GetTransitGatewayPolicyTableEntriesRequest$Filters": "The filters associated with the transit gateway policy table.
", "GetTransitGatewayPrefixListReferencesRequest$Filters": "One or more filters. The possible values are:
attachment.resource-id - The ID of the resource for the attachment.
attachment.resource-type - The type of resource for the attachment. Valid values are vpc | vpn | direct-connect-gateway | peering.
attachment.transit-gateway-attachment-id - The ID of the attachment.
is-blackhole - Whether traffic matching the route is blocked (true | false).
prefix-list-id - The ID of the prefix list.
prefix-list-owner-id - The ID of the owner of the prefix list.
state - The state of the prefix list reference (pending | available | modifying | deleting).
One or more filters. The possible values are:
resource-id - The ID of the resource.
resource-type - The resource type. Valid values are vpc | vpn | direct-connect-gateway | peering | connect.
transit-gateway-attachment-id - The ID of the attachment.
One or more filters. The possible values are:
resource-id - The ID of the resource.
resource-type - The resource type. Valid values are vpc | vpn | direct-connect-gateway | peering | connect.
transit-gateway-attachment-id - The ID of the attachment.
The version number.
", "ManagedPrefixList$Version": "The version of the prefix list.
", "ModifyManagedPrefixListRequest$CurrentVersion": "The current version of the prefix list.
", + "ModifyTransitGatewayOptions$AmazonSideAsn": "A private Autonomous System Number (ASN) for the Amazon side of a BGP session. The range is 64512 to 65534 for 16-bit ASNs and 4200000000 to 4294967294 for 32-bit ASNs.
", "PriceSchedule$Term": "The number of months remaining in the reservation. For example, 2 is the second to the last month before the capacity reservation expires.
", "PriceScheduleSpecification$Term": "The number of months remaining in the reservation. For example, 2 is the second to the last month before the capacity reservation expires.
", "ReservedInstances$Duration": "The duration of the Reserved Instance, in seconds.
", @@ -16966,6 +17106,10 @@ "DescribeTransitGatewayMulticastDomainsResult$NextToken": "The token to use to retrieve the next page of results. This value is null when there are no more results to return.
The token for the next page of results.
", "DescribeTransitGatewayPeeringAttachmentsResult$NextToken": "The token to use to retrieve the next page of results. This value is null when there are no more results to return.
The token for the next page of results.
", + "DescribeTransitGatewayPolicyTablesResult$NextToken": "The token for the next page of results.
", + "DescribeTransitGatewayRouteTableAnnouncementsRequest$NextToken": "The token for the next page of results.
", + "DescribeTransitGatewayRouteTableAnnouncementsResult$NextToken": "The token for the next page of results.
", "DescribeTransitGatewayRouteTablesRequest$NextToken": "The token for the next page of results.
", "DescribeTransitGatewayRouteTablesResult$NextToken": "The token to use to retrieve the next page of results. This value is null when there are no more results to return.
The token for the next page of results.
", @@ -17181,6 +17325,9 @@ "GetTransitGatewayAttachmentPropagationsResult$NextToken": "The token to use to retrieve the next page of results. This value is null when there are no more results to return.
The token for the next page of results.
", "GetTransitGatewayMulticastDomainAssociationsResult$NextToken": "The token to use to retrieve the next page of results. This value is null when there are no more results to return.
The token for the next page of results.
", + "GetTransitGatewayPolicyTableAssociationsResult$NextToken": "The token for the next page of results.
", + "GetTransitGatewayPolicyTableEntriesRequest$NextToken": "The token for the next page of results.
", "GetTransitGatewayPrefixListReferencesRequest$NextToken": "The token for the next page of results.
", "GetTransitGatewayPrefixListReferencesResult$NextToken": "The token to use to retrieve the next page of results. This value is null when there are no more results to return.
The token for the next page of results.
", @@ -17646,6 +17793,7 @@ "PeeringAttachmentStatus$Code": "The status code.
", "PeeringAttachmentStatus$Message": "The status message, if applicable.
", "PeeringTgwInfo$TransitGatewayId": "The ID of the transit gateway.
", + "PeeringTgwInfo$CoreNetworkId": null, "PeeringTgwInfo$OwnerId": "The ID of the Amazon Web Services account that owns the transit gateway.
", "PeeringTgwInfo$Region": "The Region of the transit gateway.
", "Phase1EncryptionAlgorithmsListValue$Value": "The value for the encryption algorithm.
", @@ -18091,6 +18239,16 @@ "TransitGatewayOptions$AssociationDefaultRouteTableId": "The ID of the default association route table.
", "TransitGatewayOptions$PropagationDefaultRouteTableId": "The ID of the default propagation route table.
", "TransitGatewayPeeringAttachment$TransitGatewayAttachmentId": "The ID of the transit gateway peering attachment.
", + "TransitGatewayPeeringAttachment$AccepterTransitGatewayAttachmentId": "The ID of the accepter transit gateway attachment.
", + "TransitGatewayPolicyRule$SourceCidrBlock": "The source CIDR block for the transit gateway policy rule.
", + "TransitGatewayPolicyRule$SourcePortRange": "The port range for the transit gateway policy rule. Currently this is set to * (all).
", + "TransitGatewayPolicyRule$DestinationCidrBlock": "The destination CIDR block for the transit gateway policy rule.
", + "TransitGatewayPolicyRule$DestinationPortRange": "The port range for the transit gateway policy rule. Currently this is set to * (all).
", + "TransitGatewayPolicyRule$Protocol": "The protocol used by the transit gateway policy rule.
", + "TransitGatewayPolicyRuleMetaData$MetaDataKey": "The key name for the transit gateway policy rule meta data tag.
", + "TransitGatewayPolicyRuleMetaData$MetaDataValue": "The value of the key for the transit gateway policy rule meta data tag.
", + "TransitGatewayPolicyTableAssociation$ResourceId": "The resource ID of the transit gateway attachment.
", + "TransitGatewayPolicyTableEntry$PolicyRuleNumber": "The rule number for the transit gateway policy table entry.
", "TransitGatewayPrefixListAttachment$ResourceId": "The ID of the resource.
", "TransitGatewayPrefixListReference$PrefixListOwnerId": "The ID of the prefix list owner.
", "TransitGatewayPropagation$ResourceId": "The ID of the resource.
", @@ -18100,6 +18258,8 @@ "TransitGatewayRouteAttachment$TransitGatewayAttachmentId": "The ID of the attachment.
", "TransitGatewayRouteTable$TransitGatewayRouteTableId": "The ID of the transit gateway route table.
", "TransitGatewayRouteTable$TransitGatewayId": "The ID of the transit gateway.
", + "TransitGatewayRouteTableAnnouncement$CoreNetworkId": null, + "TransitGatewayRouteTableAnnouncement$PeerCoreNetworkId": null, "TransitGatewayRouteTableAssociation$TransitGatewayAttachmentId": "The ID of the attachment.
", "TransitGatewayRouteTableAssociation$ResourceId": "The ID of the resource.
", "TransitGatewayRouteTablePropagation$TransitGatewayAttachmentId": "The ID of the attachment.
", @@ -18526,7 +18686,9 @@ "TransitGatewayConnectPeer$Tags": "The tags for the Connect peer.
", "TransitGatewayMulticastDomain$Tags": "The tags for the transit gateway multicast domain.
", "TransitGatewayPeeringAttachment$Tags": "The tags for the transit gateway peering attachment.
", + "TransitGatewayPolicyTable$Tags": "he key-value pairs associated with the transit gateway policy table.
", "TransitGatewayRouteTable$Tags": "Any tags assigned to the route table.
", + "TransitGatewayRouteTableAnnouncement$Tags": "The key-value pairs associated with the route table announcement.
", "TransitGatewayVpcAttachment$Tags": "The tags for the VPC attachment.
", "TrunkInterfaceAssociation$Tags": "The tags for the trunk interface association.
", "Volume$Tags": "Any tags assigned to the volume.
", @@ -18595,7 +18757,9 @@ "CreateTransitGatewayConnectRequest$TagSpecifications": "The tags to apply to the Connect attachment.
", "CreateTransitGatewayMulticastDomainRequest$TagSpecifications": "The tags for the transit gateway multicast domain.
", "CreateTransitGatewayPeeringAttachmentRequest$TagSpecifications": "The tags to apply to the transit gateway peering attachment.
", + "CreateTransitGatewayPolicyTableRequest$TagSpecifications": "The tags specification for the transit gateway policy table created during the request.
", "CreateTransitGatewayRequest$TagSpecifications": "The tags to apply to the transit gateway.
", + "CreateTransitGatewayRouteTableAnnouncementRequest$TagSpecifications": "The tags specifications applied to the transit gateway route table announcement.
", "CreateTransitGatewayRouteTableRequest$TagSpecifications": "The tags to apply to the transit gateway route table.
", "CreateTransitGatewayVpcAttachmentRequest$TagSpecifications": "The tags to apply to the VPC attachment.
", "CreateVolumeRequest$TagSpecifications": "The tags to apply to the volume during creation.
", @@ -19054,6 +19218,7 @@ "refs": { "TransitGatewayAssociation$State": "The state of the association.
", "TransitGatewayAttachmentAssociation$State": "The state of the association.
", + "TransitGatewayPolicyTableAssociation$State": "The state of the transit gateway policy table association.
", "TransitGatewayRouteTableAssociation$State": "The state of the association.
" } }, @@ -19088,16 +19253,19 @@ "AcceptTransitGatewayPeeringAttachmentRequest$TransitGatewayAttachmentId": "The ID of the transit gateway attachment.
", "AcceptTransitGatewayVpcAttachmentRequest$TransitGatewayAttachmentId": "The ID of the attachment.
", "AssociateTransitGatewayMulticastDomainRequest$TransitGatewayAttachmentId": "The ID of the transit gateway attachment to associate with the transit gateway multicast domain.
", + "AssociateTransitGatewayPolicyTableRequest$TransitGatewayAttachmentId": "The ID of the transit gateway attachment to associate with the policy table.
", "AssociateTransitGatewayRouteTableRequest$TransitGatewayAttachmentId": "The ID of the attachment.
", "CreateTransitGatewayConnectPeerRequest$TransitGatewayAttachmentId": "The ID of the Connect attachment.
", "CreateTransitGatewayConnectRequest$TransportTransitGatewayAttachmentId": "The ID of the transit gateway attachment. You can specify a VPC attachment or Amazon Web Services Direct Connect attachment.
", "CreateTransitGatewayPrefixListReferenceRequest$TransitGatewayAttachmentId": "The ID of the attachment to which traffic is routed.
", "CreateTransitGatewayRouteRequest$TransitGatewayAttachmentId": "The ID of the attachment.
", + "CreateTransitGatewayRouteTableAnnouncementRequest$PeeringAttachmentId": "The ID of the peering attachment.
", "DeleteTransitGatewayConnectRequest$TransitGatewayAttachmentId": "The ID of the Connect attachment.
", "DeleteTransitGatewayPeeringAttachmentRequest$TransitGatewayAttachmentId": "The ID of the transit gateway peering attachment.
", "DeleteTransitGatewayVpcAttachmentRequest$TransitGatewayAttachmentId": "The ID of the attachment.
", "DisableTransitGatewayRouteTablePropagationRequest$TransitGatewayAttachmentId": "The ID of the attachment.
", "DisassociateTransitGatewayMulticastDomainRequest$TransitGatewayAttachmentId": "The ID of the attachment.
", + "DisassociateTransitGatewayPolicyTableRequest$TransitGatewayAttachmentId": "The ID of the transit gateway attachment to disassociate from the policy table.
", "DisassociateTransitGatewayRouteTableRequest$TransitGatewayAttachmentId": "The ID of the attachment.
", "EnableTransitGatewayRouteTablePropagationRequest$TransitGatewayAttachmentId": "The ID of the attachment.
", "GetTransitGatewayAttachmentPropagationsRequest$TransitGatewayAttachmentId": "The ID of the attachment.
", @@ -19112,8 +19280,10 @@ "TransitGatewayConnect$TransitGatewayAttachmentId": "The ID of the Connect attachment.
", "TransitGatewayConnect$TransportTransitGatewayAttachmentId": "The ID of the attachment from which the Connect attachment was created.
", "TransitGatewayConnectPeer$TransitGatewayAttachmentId": "The ID of the Connect attachment.
", + "TransitGatewayPolicyTableAssociation$TransitGatewayAttachmentId": "The ID of the transit gateway attachment.
", "TransitGatewayPrefixListAttachment$TransitGatewayAttachmentId": "The ID of the attachment.
", "TransitGatewayPropagation$TransitGatewayAttachmentId": "The ID of the attachment.
", + "TransitGatewayRouteTableAnnouncement$PeeringAttachmentId": "The ID of the peering attachment.
", "VpnConnectionOptionsSpecification$TransportTransitGatewayAttachmentId": "The transit gateway attachment ID to use for the VPN tunnel.
Required if OutsideIpAddressType is set to PrivateIpv4.
The type of resource, for example a VPC attachment.
", "TransitGatewayMulticastDomainAssociations$ResourceType": "The type of resource, for example a VPC attachment.
", "TransitGatewayMulticastGroup$ResourceType": "The type of resource, for example a VPC attachment.
", + "TransitGatewayPolicyTableAssociation$ResourceType": "The resource type for the transit gateway policy table association.
", "TransitGatewayPrefixListAttachment$ResourceType": "The resource type. Note that the tgw-peering resource type has been deprecated.
The resource type. Note that the tgw-peering resource type has been deprecated.
The resource type. Note that the tgw-peering resource type has been deprecated.
The ID of a transit gateway.
", "CreateTransitGatewayMulticastDomainRequest$TransitGatewayId": "The ID of the transit gateway.
", "CreateTransitGatewayPeeringAttachmentRequest$TransitGatewayId": "The ID of the transit gateway.
", + "CreateTransitGatewayPolicyTableRequest$TransitGatewayId": "The ID of the transit gateway used for the policy table.
", "CreateTransitGatewayRouteTableRequest$TransitGatewayId": "The ID of the transit gateway.
", "CreateTransitGatewayVpcAttachmentRequest$TransitGatewayId": "The ID of the transit gateway.
", "CreateVpnConnectionRequest$TransitGatewayId": "The ID of the transit gateway. If you specify a transit gateway, you cannot specify a virtual private gateway.
", @@ -19256,7 +19428,10 @@ "ModifyVpnConnectionRequest$TransitGatewayId": "The ID of the transit gateway.
", "ReplaceRouteRequest$TransitGatewayId": "The ID of a transit gateway.
", "TransitGatewayConnect$TransitGatewayId": "The ID of the transit gateway.
", - "TransitGatewayIdStringList$member": null + "TransitGatewayIdStringList$member": null, + "TransitGatewayPolicyTable$TransitGatewayId": "The ID of the transit gateway.
", + "TransitGatewayRouteTableAnnouncement$TransitGatewayId": "The ID of the transit gateway.
", + "TransitGatewayRouteTableAnnouncement$PeerTransitGatewayId": "The ID of the peer transit gateway.
" } }, "TransitGatewayIdStringList": { @@ -19279,11 +19454,15 @@ "DescribeTransitGatewayConnectsRequest$MaxResults": "The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned nextToken value.
The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned nextToken value.
The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned nextToken value.
The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned nextToken value.
The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned nextToken value.
The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned nextToken value.
The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned nextToken value.
The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned nextToken value.
The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned nextToken value.
The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned nextToken value.
The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned nextToken value.
The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned nextToken value.
The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned nextToken value.
The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned nextToken value.
The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned nextToken value.
The transit gateway peering attachments.
" } }, + "TransitGatewayPeeringAttachmentOptions": { + "base": null, + "refs": { + "TransitGatewayPeeringAttachment$Options": null + } + }, + "TransitGatewayPolicyRule": { + "base": "Describes a rule associated with a transit gateway policy.
", + "refs": { + "TransitGatewayPolicyTableEntry$PolicyRule": "The policy rule associated with the transit gateway policy table.
" + } + }, + "TransitGatewayPolicyRuleMetaData": { + "base": "Describes the meta data tags associated with a transit gateway policy rule.
", + "refs": { + "TransitGatewayPolicyRule$MetaData": "The meta data tags used for the transit gateway policy rule.
" + } + }, + "TransitGatewayPolicyTable": { + "base": "Describes a transit gateway policy table.
", + "refs": { + "CreateTransitGatewayPolicyTableResult$TransitGatewayPolicyTable": "Describes the created transit gateway policy table.
", + "DeleteTransitGatewayPolicyTableResult$TransitGatewayPolicyTable": "Provides details about the deleted transit gateway policy table.
", + "TransitGatewayPolicyTableList$member": null + } + }, + "TransitGatewayPolicyTableAssociation": { + "base": "Describes a transit gateway policy table association.
", + "refs": { + "AssociateTransitGatewayPolicyTableResult$Association": "Describes the association of a transit gateway and a transit gateway policy table.
", + "DisassociateTransitGatewayPolicyTableResult$Association": "Returns details about the transit gateway policy table disassociation.
", + "TransitGatewayPolicyTableAssociationList$member": null + } + }, + "TransitGatewayPolicyTableAssociationList": { + "base": null, + "refs": { + "GetTransitGatewayPolicyTableAssociationsResult$Associations": "Returns details about the transit gateway policy table association.
" + } + }, + "TransitGatewayPolicyTableEntry": { + "base": "Describes a transit gateway policy table entry
", + "refs": { + "TransitGatewayPolicyTableEntryList$member": null + } + }, + "TransitGatewayPolicyTableEntryList": { + "base": null, + "refs": { + "GetTransitGatewayPolicyTableEntriesResult$TransitGatewayPolicyTableEntries": "The entries for the transit gateway policy table.
" + } + }, + "TransitGatewayPolicyTableId": { + "base": null, + "refs": { + "AssociateTransitGatewayPolicyTableRequest$TransitGatewayPolicyTableId": "The ID of the transit gateway policy table to associate with the transit gateway attachment.
", + "DeleteTransitGatewayPolicyTableRequest$TransitGatewayPolicyTableId": "The transit gateway policy table to delete.
", + "DisassociateTransitGatewayPolicyTableRequest$TransitGatewayPolicyTableId": "The ID of the disassociated policy table.
", + "GetTransitGatewayPolicyTableAssociationsRequest$TransitGatewayPolicyTableId": "The ID of the transit gateway policy table.
", + "GetTransitGatewayPolicyTableEntriesRequest$TransitGatewayPolicyTableId": "The ID of the transit gateway policy table.
", + "TransitGatewayPolicyTable$TransitGatewayPolicyTableId": "The ID of the transit gateway policy table.
", + "TransitGatewayPolicyTableAssociation$TransitGatewayPolicyTableId": "The ID of the transit gateway policy table.
", + "TransitGatewayPolicyTableIdStringList$member": null + } + }, + "TransitGatewayPolicyTableIdStringList": { + "base": null, + "refs": { + "DescribeTransitGatewayPolicyTablesRequest$TransitGatewayPolicyTableIds": "The IDs of the transit gateway policy tables.
" + } + }, + "TransitGatewayPolicyTableList": { + "base": null, + "refs": { + "DescribeTransitGatewayPolicyTablesResult$TransitGatewayPolicyTables": "Describes the transit gateway policy tables.
" + } + }, + "TransitGatewayPolicyTableState": { + "base": null, + "refs": { + "TransitGatewayPolicyTable$State": "The state of the transit gateway policy table
" + } + }, "TransitGatewayPrefixListAttachment": { "base": "Describes a transit gateway prefix list attachment.
", "refs": { @@ -19523,6 +19785,51 @@ "TransitGatewayRouteTableList$member": null } }, + "TransitGatewayRouteTableAnnouncement": { + "base": "Describes a transit gateway route table announcement.
", + "refs": { + "CreateTransitGatewayRouteTableAnnouncementResult$TransitGatewayRouteTableAnnouncement": "Provides details about the transit gateway route table announcement.
", + "DeleteTransitGatewayRouteTableAnnouncementResult$TransitGatewayRouteTableAnnouncement": "Provides details about a deleted transit gateway route table.
", + "TransitGatewayRouteTableAnnouncementList$member": null + } + }, + "TransitGatewayRouteTableAnnouncementDirection": { + "base": null, + "refs": { + "TransitGatewayRouteTableAnnouncement$AnnouncementDirection": "The direction for the route table announcement.
" + } + }, + "TransitGatewayRouteTableAnnouncementId": { + "base": null, + "refs": { + "DeleteTransitGatewayRouteTableAnnouncementRequest$TransitGatewayRouteTableAnnouncementId": "The transit gateway route table ID that's being deleted.
", + "DisableTransitGatewayRouteTablePropagationRequest$TransitGatewayRouteTableAnnouncementId": "The ID of the route table announcement.
", + "EnableTransitGatewayRouteTablePropagationRequest$TransitGatewayRouteTableAnnouncementId": "The ID of the transit gateway route table announcement.
", + "TransitGatewayPropagation$TransitGatewayRouteTableAnnouncementId": "The ID of the transit gateway route table announcement.
", + "TransitGatewayRoute$TransitGatewayRouteTableAnnouncementId": null, + "TransitGatewayRouteTableAnnouncement$TransitGatewayRouteTableAnnouncementId": "The ID of the transit gateway route table announcement.
", + "TransitGatewayRouteTableAnnouncementIdStringList$member": null, + "TransitGatewayRouteTablePropagation$TransitGatewayRouteTableAnnouncementId": "The ID of the transit gateway route table announcement.
" + } + }, + "TransitGatewayRouteTableAnnouncementIdStringList": { + "base": null, + "refs": { + "DescribeTransitGatewayRouteTableAnnouncementsRequest$TransitGatewayRouteTableAnnouncementIds": "The IDs of the transit gateway route tables that are being advertised.
" + } + }, + "TransitGatewayRouteTableAnnouncementList": { + "base": null, + "refs": { + "DescribeTransitGatewayRouteTableAnnouncementsResult$TransitGatewayRouteTableAnnouncements": "Describes the transit gateway route table announcement.
" + } + }, + "TransitGatewayRouteTableAnnouncementState": { + "base": null, + "refs": { + "TransitGatewayRouteTableAnnouncement$State": "The state of the transit gateway announcement.
" + } + }, "TransitGatewayRouteTableAssociation": { "base": "Describes an association between a route table and a resource attachment.
", "refs": { @@ -19541,6 +19848,7 @@ "AssociateTransitGatewayRouteTableRequest$TransitGatewayRouteTableId": "The ID of the transit gateway route table.
", "CreateTransitGatewayPrefixListReferenceRequest$TransitGatewayRouteTableId": "The ID of the transit gateway route table.
", "CreateTransitGatewayRouteRequest$TransitGatewayRouteTableId": "The ID of the transit gateway route table.
", + "CreateTransitGatewayRouteTableAnnouncementRequest$TransitGatewayRouteTableId": "The ID of the transit gateway route table.
", "DeleteTransitGatewayPrefixListReferenceRequest$TransitGatewayRouteTableId": "The ID of the route table.
", "DeleteTransitGatewayRouteRequest$TransitGatewayRouteTableId": "The ID of the transit gateway route table.
", "DeleteTransitGatewayRouteTableRequest$TransitGatewayRouteTableId": "The ID of the transit gateway route table.
", @@ -19557,7 +19865,9 @@ "ReplaceTransitGatewayRouteRequest$TransitGatewayRouteTableId": "The ID of the route table.
", "SearchTransitGatewayRoutesRequest$TransitGatewayRouteTableId": "The ID of the transit gateway route table.
", "TransitGatewayAssociation$TransitGatewayRouteTableId": "The ID of the transit gateway route table.
", + "TransitGatewayPolicyTableEntry$TargetRouteTableId": "The ID of the target route table.
", "TransitGatewayPrefixListReference$TransitGatewayRouteTableId": "The ID of the transit gateway route table.
", + "TransitGatewayRouteTableAnnouncement$TransitGatewayRouteTableId": "The ID of the transit gateway route table.
", "TransitGatewayRouteTableIdStringList$member": null } }, diff --git a/models/apis/ec2/2016-11-15/paginators-1.json b/models/apis/ec2/2016-11-15/paginators-1.json index 4745c97e8c..4b3d20d01a 100755 --- a/models/apis/ec2/2016-11-15/paginators-1.json +++ b/models/apis/ec2/2016-11-15/paginators-1.json @@ -536,6 +536,18 @@ "output_token": "NextToken", "result_key": "TransitGatewayPeeringAttachments" }, + "DescribeTransitGatewayPolicyTables": { + "input_token": "NextToken", + "limit_key": "MaxResults", + "output_token": "NextToken", + "result_key": "TransitGatewayPolicyTables" + }, + "DescribeTransitGatewayRouteTableAnnouncements": { + "input_token": "NextToken", + "limit_key": "MaxResults", + "output_token": "NextToken", + "result_key": "TransitGatewayRouteTableAnnouncements" + }, "DescribeTransitGatewayRouteTables": { "input_token": "NextToken", "limit_key": "MaxResults", @@ -704,6 +716,12 @@ "output_token": "NextToken", "result_key": "MulticastDomainAssociations" }, + "GetTransitGatewayPolicyTableAssociations": { + "input_token": "NextToken", + "limit_key": "MaxResults", + "output_token": "NextToken", + "result_key": "Associations" + }, "GetTransitGatewayPrefixListReferences": { "input_token": "NextToken", "limit_key": "MaxResults", diff --git a/models/apis/redshift-serverless/2021-04-21/docs-2.json b/models/apis/redshift-serverless/2021-04-21/docs-2.json index 358e8aab15..8c50aa175f 100644 --- a/models/apis/redshift-serverless/2021-04-21/docs-2.json +++ b/models/apis/redshift-serverless/2021-04-21/docs-2.json @@ -1,6 +1,6 @@ { "version": "2.0", - "service": "This is prerelease documentation for Amazon Redshift Serverless, which is in preview release. The documentation and the feature are both subject to change. We recommend that you use this feature only in test environments, and not in production environments. For preview terms and conditions, see Beta Service Participation in Amazon Web Services Service Terms.
This is an interface reference for Amazon Redshift Serverless. It contains documentation for one of the programming or command line interfaces you can use to manage Amazon Redshift Serverless.
Amazon Redshift Serverless automatically provisions data warehouse capacity and intelligently scales the underlying resources based on workload demands. Amazon Redshift Serverless adjusts capacity in seconds to deliver consistently high performance and simplified operations for even the most demanding and volatile workloads. Amazon Redshift Serverless lets you focus on using your data to acquire new insights for your business and customers.
To learn more about Amazon Redshift Serverless, see What is Amazon Redshift Serverless.
", + "service": "This is an interface reference for Amazon Redshift Serverless. It contains documentation for one of the programming or command line interfaces you can use to manage Amazon Redshift Serverless.
Amazon Redshift Serverless automatically provisions data warehouse capacity and intelligently scales the underlying resources based on workload demands. Amazon Redshift Serverless adjusts capacity in seconds to deliver consistently high performance and simplified operations for even the most demanding and volatile workloads. Amazon Redshift Serverless lets you focus on using your data to acquire new insights for your business and customers.
To learn more about Amazon Redshift Serverless, see What is Amazon Redshift Serverless.
", "operations": { "ConvertRecoveryPointToSnapshot": "Converts a recovery point to a snapshot. For more information about recovery points and snapshots, see Working with snapshots and recovery points.
", "CreateEndpointAccess": "Creates an Amazon Redshift Serverless managed VPC endpoint.
", diff --git a/models/apis/redshift/2012-12-01/api-2.json b/models/apis/redshift/2012-12-01/api-2.json index 48381edcb7..737301fb3c 100644 --- a/models/apis/redshift/2012-12-01/api-2.json +++ b/models/apis/redshift/2012-12-01/api-2.json @@ -135,7 +135,8 @@ {"shape":"AuthorizationQuotaExceededFault"}, {"shape":"DependentServiceRequestThrottlingFault"}, {"shape":"InvalidClusterSnapshotStateFault"}, - {"shape":"LimitExceededFault"} + {"shape":"LimitExceededFault"}, + {"shape":"UnsupportedOperationFault"} ] }, "BatchDeleteClusterSnapshots":{ @@ -858,7 +859,8 @@ "errors":[ {"shape":"ClusterNotFoundFault"}, {"shape":"ClusterSnapshotNotFoundFault"}, - {"shape":"InvalidTagFault"} + {"shape":"InvalidTagFault"}, + {"shape":"UnsupportedOperationFault"} ] }, "DescribeClusterSubnetGroups":{ @@ -1113,7 +1115,8 @@ {"shape":"ClusterSnapshotNotFoundFault"}, {"shape":"InvalidClusterSnapshotStateFault"}, {"shape":"ClusterNotFoundFault"}, - {"shape":"AccessToSnapshotDeniedFault"} + {"shape":"AccessToSnapshotDeniedFault"}, + {"shape":"UnsupportedOperationFault"} ] }, "DescribeOrderableClusterOptions":{ @@ -2025,7 +2028,8 @@ "errors":[ {"shape":"AccessToSnapshotDeniedFault"}, {"shape":"AuthorizationNotFoundFault"}, - {"shape":"ClusterSnapshotNotFoundFault"} + {"shape":"ClusterSnapshotNotFoundFault"}, + {"shape":"UnsupportedOperationFault"} ] }, "RotateEncryptionKey":{ @@ -2332,12 +2336,10 @@ }, "AuthorizeSnapshotAccessMessage":{ "type":"structure", - "required":[ - "SnapshotIdentifier", - "AccountWithRestoreAccess" - ], + "required":["AccountWithRestoreAccess"], "members":{ "SnapshotIdentifier":{"shape":"String"}, + "SnapshotArn":{"shape":"String"}, "SnapshotClusterIdentifier":{"shape":"String"}, "AccountWithRestoreAccess":{"shape":"String"} } @@ -3606,6 +3608,7 @@ "members":{ "ClusterIdentifier":{"shape":"String"}, "SnapshotIdentifier":{"shape":"String"}, + "SnapshotArn":{"shape":"String"}, "SnapshotType":{"shape":"String"}, "StartTime":{"shape":"TStamp"}, "EndTime":{"shape":"TStamp"}, @@ -3800,6 +3803,7 @@ "ActionType":{"shape":"ActionType"}, "ClusterIdentifier":{"shape":"String"}, "SnapshotIdentifier":{"shape":"String"}, + "SnapshotArn":{"shape":"String"}, "OwnerAccount":{"shape":"String"}, "Filters":{ "shape":"NodeConfigurationOptionsFilterList", @@ -5790,13 +5794,11 @@ }, "RestoreFromClusterSnapshotMessage":{ "type":"structure", - "required":[ - "ClusterIdentifier", - "SnapshotIdentifier" - ], + "required":["ClusterIdentifier"], "members":{ "ClusterIdentifier":{"shape":"String"}, "SnapshotIdentifier":{"shape":"String"}, + "SnapshotArn":{"shape":"String"}, "SnapshotClusterIdentifier":{"shape":"String"}, "Port":{"shape":"IntegerOptional"}, "AvailabilityZone":{"shape":"String"}, @@ -5928,12 +5930,10 @@ }, "RevokeSnapshotAccessMessage":{ "type":"structure", - "required":[ - "SnapshotIdentifier", - "AccountWithRestoreAccess" - ], + "required":["AccountWithRestoreAccess"], "members":{ "SnapshotIdentifier":{"shape":"String"}, + "SnapshotArn":{"shape":"String"}, "SnapshotClusterIdentifier":{"shape":"String"}, "AccountWithRestoreAccess":{"shape":"String"} } diff --git a/models/apis/redshift/2012-12-01/docs-2.json b/models/apis/redshift/2012-12-01/docs-2.json index b7e9c5e9bb..27a2835fc0 100644 --- a/models/apis/redshift/2012-12-01/docs-2.json +++ b/models/apis/redshift/2012-12-01/docs-2.json @@ -2937,6 +2937,7 @@ "AuthorizeEndpointAccessMessage$ClusterIdentifier": "The cluster identifier of the cluster to grant access to.
", "AuthorizeEndpointAccessMessage$Account": "The Amazon Web Services account ID to grant access to.
", "AuthorizeSnapshotAccessMessage$SnapshotIdentifier": "The identifier of the snapshot the account is authorized to restore.
", + "AuthorizeSnapshotAccessMessage$SnapshotArn": "The Amazon Resource Name (ARN) of the snapshot to authorize access to.
", "AuthorizeSnapshotAccessMessage$SnapshotClusterIdentifier": "The identifier of the cluster the snapshot was created from. This parameter is required if your IAM user has a policy containing a snapshot resource element that specifies anything other than * for the cluster name.
", "AuthorizeSnapshotAccessMessage$AccountWithRestoreAccess": "The identifier of the Amazon Web Services account authorized to restore the specified snapshot.
To share a snapshot with Amazon Web Services Support, specify amazon-redshift-support.
", "AvailabilityZone$Name": "The name of the availability zone.
", @@ -3022,7 +3023,7 @@ "CreateClusterMessage$ClusterVersion": "The version of the Amazon Redshift engine software that you want to deploy on the cluster.
The version selected runs on all the nodes in the cluster.
Constraints: Only version 1.0 is currently available.
Example: 1.0
Specifies the name of the HSM client certificate the Amazon Redshift cluster uses to retrieve the data encryption keys stored in an HSM.
", "CreateClusterMessage$HsmConfigurationIdentifier": "Specifies the name of the HSM configuration that contains the information the Amazon Redshift cluster can use to retrieve and store keys in an HSM.
", - "CreateClusterMessage$ElasticIp": "The Elastic IP (EIP) address for the cluster.
Constraints: The cluster must be provisioned in EC2-VPC and publicly-accessible through an Internet gateway. For more information about provisioning clusters in EC2-VPC, go to Supported Platforms to Launch Your Cluster in the Amazon Redshift Cluster Management Guide.
", + "CreateClusterMessage$ElasticIp": "The Elastic IP (EIP) address for the cluster. You don't have to specify the EIP for a publicly accessible cluster with AvailabilityZoneRelocation turned on.
Constraints: The cluster must be provisioned in EC2-VPC and publicly-accessible through an Internet gateway. For more information about provisioning clusters in EC2-VPC, go to Supported Platforms to Launch Your Cluster in the Amazon Redshift Cluster Management Guide.
", "CreateClusterMessage$KmsKeyId": "The Key Management Service (KMS) key ID of the encryption key that you want to use to encrypt data in the cluster.
", "CreateClusterMessage$AdditionalInfo": "Reserved.
", "CreateClusterMessage$MaintenanceTrackName": "An optional parameter for the name of the maintenance track for the cluster. If you don't provide a maintenance track name, the cluster is assigned to the current track.
An optional parameter that specifies the starting point to return a set of response records. When the results of a DescribeClusterSecurityGroups request exceed the value specified in MaxRecords, Amazon Web Services returns a value in the Marker field of the response. You can retrieve the next set of response records by providing the returned marker value in the Marker parameter and retrying the request.
Constraints: You can specify either the ClusterSecurityGroupName parameter or the Marker parameter, but not both.
", "DescribeClusterSnapshotsMessage$ClusterIdentifier": "The identifier of the cluster which generated the requested snapshots.
", "DescribeClusterSnapshotsMessage$SnapshotIdentifier": "The snapshot identifier of the snapshot about which to return information.
", + "DescribeClusterSnapshotsMessage$SnapshotArn": "The Amazon Resource Name (ARN) of the snapshot associated with the message to describe cluster snapshots.
", "DescribeClusterSnapshotsMessage$SnapshotType": "The type of snapshots for which you are requesting information. By default, snapshots of all types are returned.
Valid Values: automated | manual
An optional parameter that specifies the starting point to return a set of response records. When the results of a DescribeClusterSnapshots request exceed the value specified in MaxRecords, Amazon Web Services returns a value in the Marker field of the response. You can retrieve the next set of response records by providing the returned marker value in the Marker parameter and retrying the request.
The Amazon Web Services account used to create or copy the snapshot. Use this field to filter the results to snapshots owned by a particular account. To describe snapshots you own, either specify your Amazon Web Services account, or do not specify the parameter.
", @@ -3145,6 +3147,7 @@ "DescribeLoggingStatusMessage$ClusterIdentifier": "The identifier of the cluster from which to get the logging status.
Example: examplecluster
The identifier of the cluster to evaluate for possible node configurations.
", "DescribeNodeConfigurationOptionsMessage$SnapshotIdentifier": "The identifier of the snapshot to evaluate for possible node configurations.
", + "DescribeNodeConfigurationOptionsMessage$SnapshotArn": "The Amazon Resource Name (ARN) of the snapshot associated with the message to describe node configuration.
", "DescribeNodeConfigurationOptionsMessage$OwnerAccount": "The Amazon Web Services account used to create or copy the snapshot. Required if you are restoring a snapshot you do not own, optional if you own the snapshot.
", "DescribeNodeConfigurationOptionsMessage$Marker": "An optional parameter that specifies the starting point to return a set of response records. When the results of a DescribeNodeConfigurationOptions request exceed the value specified in MaxRecords, Amazon Web Services returns a value in the Marker field of the response. You can retrieve the next set of response records by providing the returned marker value in the Marker parameter and retrying the request.
The version filter value. Specify this parameter to show only the available offerings matching the specified version.
Default: All versions.
Constraints: Must be one of the version returned from DescribeClusterVersions.
", @@ -3361,13 +3364,14 @@ "RestorableNodeTypeList$member": null, "RestoreFromClusterSnapshotMessage$ClusterIdentifier": "The identifier of the cluster that will be created from restoring the snapshot.
Constraints:
Must contain from 1 to 63 alphanumeric characters or hyphens.
Alphabetic characters must be lowercase.
First character must be a letter.
Cannot end with a hyphen or contain two consecutive hyphens.
Must be unique for all clusters within an Amazon Web Services account.
The name of the snapshot from which to create the new cluster. This parameter isn't case sensitive.
Example: my-snapshot-id
The Amazon Resource Name (ARN) of the snapshot associated with the message to restore from a cluster.
", "RestoreFromClusterSnapshotMessage$SnapshotClusterIdentifier": "The name of the cluster the source snapshot was created from. This parameter is required if your IAM user has a policy containing a snapshot resource element that specifies anything other than * for the cluster name.
", "RestoreFromClusterSnapshotMessage$AvailabilityZone": "The Amazon EC2 Availability Zone in which to restore the cluster.
Default: A random, system-chosen Availability Zone.
Example: us-east-2a
The name of the subnet group where you want to cluster restored.
A snapshot of cluster in VPC can be restored only in VPC. Therefore, you must provide subnet group name where you want the cluster restored.
", "RestoreFromClusterSnapshotMessage$OwnerAccount": "The Amazon Web Services account used to create or copy the snapshot. Required if you are restoring a snapshot you do not own, optional if you own the snapshot.
", "RestoreFromClusterSnapshotMessage$HsmClientCertificateIdentifier": "Specifies the name of the HSM client certificate the Amazon Redshift cluster uses to retrieve the data encryption keys stored in an HSM.
", "RestoreFromClusterSnapshotMessage$HsmConfigurationIdentifier": "Specifies the name of the HSM configuration that contains the information the Amazon Redshift cluster can use to retrieve and store keys in an HSM.
", - "RestoreFromClusterSnapshotMessage$ElasticIp": "The elastic IP (EIP) address for the cluster.
", + "RestoreFromClusterSnapshotMessage$ElasticIp": "The elastic IP (EIP) address for the cluster. You don't have to specify the EIP for a publicly accessible cluster with AvailabilityZoneRelocation turned on.
", "RestoreFromClusterSnapshotMessage$ClusterParameterGroupName": "The name of the parameter group to be associated with this cluster.
Default: The default Amazon Redshift cluster parameter group. For information about the default parameter group, go to Working with Amazon Redshift Parameter Groups.
Constraints:
Must be 1 to 255 alphanumeric characters or hyphens.
First character must be a letter.
Cannot end with a hyphen or contain two consecutive hyphens.
The weekly time range (in UTC) during which automated cluster maintenance can occur.
Format: ddd:hh24:mi-ddd:hh24:mi
Default: The value selected for the cluster from which the snapshot was taken. For more information about the time blocks for each region, see Maintenance Windows in Amazon Redshift Cluster Management Guide.
Valid Days: Mon | Tue | Wed | Thu | Fri | Sat | Sun
Constraints: Minimum 30-minute window.
", "RestoreFromClusterSnapshotMessage$KmsKeyId": "The Key Management Service (KMS) key ID of the encryption key that encrypts data in the cluster restored from a shared snapshot. You can also provide the key ID when you restore from an unencrypted snapshot to an encrypted cluster in the same account. Additionally, you can specify a new KMS key ID when you restore from an encrypted snapshot in the same account in order to change it. In that case, the restored cluster is encrypted with the new KMS key ID.
", @@ -3397,6 +3401,7 @@ "RevokeEndpointAccessMessage$ClusterIdentifier": "The cluster to revoke access from.
", "RevokeEndpointAccessMessage$Account": "The Amazon Web Services account ID whose access is to be revoked.
", "RevokeSnapshotAccessMessage$SnapshotIdentifier": "The identifier of the snapshot that the account can no longer access.
", + "RevokeSnapshotAccessMessage$SnapshotArn": "The Amazon Resource Name (ARN) of the snapshot associated with the message to revoke access.
", "RevokeSnapshotAccessMessage$SnapshotClusterIdentifier": "The identifier of the cluster the snapshot was created from. This parameter is required if your IAM user has a policy containing a snapshot resource element that specifies anything other than * for the cluster name.
", "RevokeSnapshotAccessMessage$AccountWithRestoreAccess": "The identifier of the Amazon Web Services account that can no longer restore the specified snapshot.
", "RotateEncryptionKeyMessage$ClusterIdentifier": "The unique identifier of the cluster that you want to rotate the encryption keys for.
Constraints: Must be the name of valid cluster that has encryption enabled.
", diff --git a/models/endpoints/endpoints.json b/models/endpoints/endpoints.json index a656cc4a4e..db4b319cdc 100644 --- a/models/endpoints/endpoints.json +++ b/models/endpoints/endpoints.json @@ -420,10 +420,15 @@ "ap-southeast-2" : { }, "ca-central-1" : { }, "eu-central-1" : { }, + "eu-north-1" : { }, "eu-west-1" : { }, "eu-west-2" : { }, + "eu-west-3" : { }, + "me-south-1" : { }, + "sa-east-1" : { }, "us-east-1" : { }, "us-east-2" : { }, + "us-west-1" : { }, "us-west-2" : { } } }, @@ -1459,6 +1464,7 @@ "deprecated" : true, "hostname" : "appstream2-fips.us-east-1.amazonaws.com" }, + "us-east-2" : { }, "us-west-2" : { "variants" : [ { "hostname" : "appstream2-fips.us-west-2.amazonaws.com", @@ -7128,6 +7134,7 @@ }, "kinesisvideo" : { "endpoints" : { + "af-south-1" : { }, "ap-east-1" : { }, "ap-northeast-1" : { }, "ap-northeast-2" : { }, @@ -8853,6 +8860,12 @@ }, "oidc" : { "endpoints" : { + "ap-east-1" : { + "credentialScope" : { + "region" : "ap-east-1" + }, + "hostname" : "oidc.ap-east-1.amazonaws.com" + }, "ap-northeast-1" : { "credentialScope" : { "region" : "ap-northeast-1" @@ -8931,6 +8944,12 @@ }, "hostname" : "oidc.eu-west-3.amazonaws.com" }, + "me-south-1" : { + "credentialScope" : { + "region" : "me-south-1" + }, + "hostname" : "oidc.me-south-1.amazonaws.com" + }, "sa-east-1" : { "credentialScope" : { "region" : "sa-east-1" @@ -9262,6 +9281,12 @@ }, "portal.sso" : { "endpoints" : { + "ap-east-1" : { + "credentialScope" : { + "region" : "ap-east-1" + }, + "hostname" : "portal.sso.ap-east-1.amazonaws.com" + }, "ap-northeast-1" : { "credentialScope" : { "region" : "ap-northeast-1" @@ -9340,6 +9365,12 @@ }, "hostname" : "portal.sso.eu-west-3.amazonaws.com" }, + "me-south-1" : { + "credentialScope" : { + "region" : "me-south-1" + }, + "hostname" : "portal.sso.me-south-1.amazonaws.com" + }, "sa-east-1" : { "credentialScope" : { "region" : "sa-east-1" @@ -19010,7 +19041,8 @@ }, "es" : { "endpoints" : { - "us-iso-east-1" : { } + "us-iso-east-1" : { }, + "us-iso-west-1" : { } } }, "events" : { diff --git a/service/ec2/api.go b/service/ec2/api.go index f501155e77..c8776ffdd5 100644 --- a/service/ec2/api.go +++ b/service/ec2/api.go @@ -1838,6 +1838,81 @@ func (c *EC2) AssociateTransitGatewayMulticastDomainWithContext(ctx aws.Context, return out, req.Send() } +const opAssociateTransitGatewayPolicyTable = "AssociateTransitGatewayPolicyTable" + +// AssociateTransitGatewayPolicyTableRequest generates a "aws/request.Request" representing the +// client's request for the AssociateTransitGatewayPolicyTable operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See AssociateTransitGatewayPolicyTable for more information on using the AssociateTransitGatewayPolicyTable +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the AssociateTransitGatewayPolicyTableRequest method. +// req, resp := client.AssociateTransitGatewayPolicyTableRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateTransitGatewayPolicyTable +func (c *EC2) AssociateTransitGatewayPolicyTableRequest(input *AssociateTransitGatewayPolicyTableInput) (req *request.Request, output *AssociateTransitGatewayPolicyTableOutput) { + op := &request.Operation{ + Name: opAssociateTransitGatewayPolicyTable, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &AssociateTransitGatewayPolicyTableInput{} + } + + output = &AssociateTransitGatewayPolicyTableOutput{} + req = c.newRequest(op, input, output) + return +} + +// AssociateTransitGatewayPolicyTable API operation for Amazon Elastic Compute Cloud. +// +// Associates the specified transit gateway attachment with a transit gateway +// policy table. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation AssociateTransitGatewayPolicyTable for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/AssociateTransitGatewayPolicyTable +func (c *EC2) AssociateTransitGatewayPolicyTable(input *AssociateTransitGatewayPolicyTableInput) (*AssociateTransitGatewayPolicyTableOutput, error) { + req, out := c.AssociateTransitGatewayPolicyTableRequest(input) + return out, req.Send() +} + +// AssociateTransitGatewayPolicyTableWithContext is the same as AssociateTransitGatewayPolicyTable with the addition of +// the ability to pass a context and additional request options. +// +// See AssociateTransitGatewayPolicyTable for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) AssociateTransitGatewayPolicyTableWithContext(ctx aws.Context, input *AssociateTransitGatewayPolicyTableInput, opts ...request.Option) (*AssociateTransitGatewayPolicyTableOutput, error) { + req, out := c.AssociateTransitGatewayPolicyTableRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + const opAssociateTransitGatewayRouteTable = "AssociateTransitGatewayRouteTable" // AssociateTransitGatewayRouteTableRequest generates a "aws/request.Request" representing the @@ -8629,8 +8704,9 @@ func (c *EC2) CreateTransitGatewayPeeringAttachmentRequest(input *CreateTransitG // CreateTransitGatewayPeeringAttachment API operation for Amazon Elastic Compute Cloud. // // Requests a transit gateway peering attachment between the specified transit -// gateway (requester) and a peer transit gateway (accepter). The peer transit -// gateway can be in your account or a different Amazon Web Services account. +// gateway (requester) and a peer transit gateway (accepter). The transit gateways +// must be in different Regions. The peer transit gateway can be in your account +// or a different Amazon Web Services account. // // After you create the peering attachment, the owner of the accepter transit // gateway must accept the attachment request. @@ -8663,6 +8739,80 @@ func (c *EC2) CreateTransitGatewayPeeringAttachmentWithContext(ctx aws.Context, return out, req.Send() } +const opCreateTransitGatewayPolicyTable = "CreateTransitGatewayPolicyTable" + +// CreateTransitGatewayPolicyTableRequest generates a "aws/request.Request" representing the +// client's request for the CreateTransitGatewayPolicyTable operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See CreateTransitGatewayPolicyTable for more information on using the CreateTransitGatewayPolicyTable +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the CreateTransitGatewayPolicyTableRequest method. +// req, resp := client.CreateTransitGatewayPolicyTableRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateTransitGatewayPolicyTable +func (c *EC2) CreateTransitGatewayPolicyTableRequest(input *CreateTransitGatewayPolicyTableInput) (req *request.Request, output *CreateTransitGatewayPolicyTableOutput) { + op := &request.Operation{ + Name: opCreateTransitGatewayPolicyTable, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &CreateTransitGatewayPolicyTableInput{} + } + + output = &CreateTransitGatewayPolicyTableOutput{} + req = c.newRequest(op, input, output) + return +} + +// CreateTransitGatewayPolicyTable API operation for Amazon Elastic Compute Cloud. +// +// Creates a transit gateway policy table. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation CreateTransitGatewayPolicyTable for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateTransitGatewayPolicyTable +func (c *EC2) CreateTransitGatewayPolicyTable(input *CreateTransitGatewayPolicyTableInput) (*CreateTransitGatewayPolicyTableOutput, error) { + req, out := c.CreateTransitGatewayPolicyTableRequest(input) + return out, req.Send() +} + +// CreateTransitGatewayPolicyTableWithContext is the same as CreateTransitGatewayPolicyTable with the addition of +// the ability to pass a context and additional request options. +// +// See CreateTransitGatewayPolicyTable for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateTransitGatewayPolicyTableWithContext(ctx aws.Context, input *CreateTransitGatewayPolicyTableInput, opts ...request.Option) (*CreateTransitGatewayPolicyTableOutput, error) { + req, out := c.CreateTransitGatewayPolicyTableRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + const opCreateTransitGatewayPrefixListReference = "CreateTransitGatewayPrefixListReference" // CreateTransitGatewayPrefixListReferenceRequest generates a "aws/request.Request" representing the @@ -8886,6 +9036,80 @@ func (c *EC2) CreateTransitGatewayRouteTableWithContext(ctx aws.Context, input * return out, req.Send() } +const opCreateTransitGatewayRouteTableAnnouncement = "CreateTransitGatewayRouteTableAnnouncement" + +// CreateTransitGatewayRouteTableAnnouncementRequest generates a "aws/request.Request" representing the +// client's request for the CreateTransitGatewayRouteTableAnnouncement operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See CreateTransitGatewayRouteTableAnnouncement for more information on using the CreateTransitGatewayRouteTableAnnouncement +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the CreateTransitGatewayRouteTableAnnouncementRequest method. +// req, resp := client.CreateTransitGatewayRouteTableAnnouncementRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateTransitGatewayRouteTableAnnouncement +func (c *EC2) CreateTransitGatewayRouteTableAnnouncementRequest(input *CreateTransitGatewayRouteTableAnnouncementInput) (req *request.Request, output *CreateTransitGatewayRouteTableAnnouncementOutput) { + op := &request.Operation{ + Name: opCreateTransitGatewayRouteTableAnnouncement, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &CreateTransitGatewayRouteTableAnnouncementInput{} + } + + output = &CreateTransitGatewayRouteTableAnnouncementOutput{} + req = c.newRequest(op, input, output) + return +} + +// CreateTransitGatewayRouteTableAnnouncement API operation for Amazon Elastic Compute Cloud. +// +// Advertises a new transit gateway route table. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation CreateTransitGatewayRouteTableAnnouncement for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/CreateTransitGatewayRouteTableAnnouncement +func (c *EC2) CreateTransitGatewayRouteTableAnnouncement(input *CreateTransitGatewayRouteTableAnnouncementInput) (*CreateTransitGatewayRouteTableAnnouncementOutput, error) { + req, out := c.CreateTransitGatewayRouteTableAnnouncementRequest(input) + return out, req.Send() +} + +// CreateTransitGatewayRouteTableAnnouncementWithContext is the same as CreateTransitGatewayRouteTableAnnouncement with the addition of +// the ability to pass a context and additional request options. +// +// See CreateTransitGatewayRouteTableAnnouncement for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) CreateTransitGatewayRouteTableAnnouncementWithContext(ctx aws.Context, input *CreateTransitGatewayRouteTableAnnouncementInput, opts ...request.Option) (*CreateTransitGatewayRouteTableAnnouncementOutput, error) { + req, out := c.CreateTransitGatewayRouteTableAnnouncementRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + const opCreateTransitGatewayVpcAttachment = "CreateTransitGatewayVpcAttachment" // CreateTransitGatewayVpcAttachmentRequest generates a "aws/request.Request" representing the @@ -13489,6 +13713,80 @@ func (c *EC2) DeleteTransitGatewayPeeringAttachmentWithContext(ctx aws.Context, return out, req.Send() } +const opDeleteTransitGatewayPolicyTable = "DeleteTransitGatewayPolicyTable" + +// DeleteTransitGatewayPolicyTableRequest generates a "aws/request.Request" representing the +// client's request for the DeleteTransitGatewayPolicyTable operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DeleteTransitGatewayPolicyTable for more information on using the DeleteTransitGatewayPolicyTable +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DeleteTransitGatewayPolicyTableRequest method. +// req, resp := client.DeleteTransitGatewayPolicyTableRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteTransitGatewayPolicyTable +func (c *EC2) DeleteTransitGatewayPolicyTableRequest(input *DeleteTransitGatewayPolicyTableInput) (req *request.Request, output *DeleteTransitGatewayPolicyTableOutput) { + op := &request.Operation{ + Name: opDeleteTransitGatewayPolicyTable, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &DeleteTransitGatewayPolicyTableInput{} + } + + output = &DeleteTransitGatewayPolicyTableOutput{} + req = c.newRequest(op, input, output) + return +} + +// DeleteTransitGatewayPolicyTable API operation for Amazon Elastic Compute Cloud. +// +// Deletes the specified transit gateway policy table. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DeleteTransitGatewayPolicyTable for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteTransitGatewayPolicyTable +func (c *EC2) DeleteTransitGatewayPolicyTable(input *DeleteTransitGatewayPolicyTableInput) (*DeleteTransitGatewayPolicyTableOutput, error) { + req, out := c.DeleteTransitGatewayPolicyTableRequest(input) + return out, req.Send() +} + +// DeleteTransitGatewayPolicyTableWithContext is the same as DeleteTransitGatewayPolicyTable with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteTransitGatewayPolicyTable for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteTransitGatewayPolicyTableWithContext(ctx aws.Context, input *DeleteTransitGatewayPolicyTableInput, opts ...request.Option) (*DeleteTransitGatewayPolicyTableOutput, error) { + req, out := c.DeleteTransitGatewayPolicyTableRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + const opDeleteTransitGatewayPrefixListReference = "DeleteTransitGatewayPrefixListReference" // DeleteTransitGatewayPrefixListReferenceRequest generates a "aws/request.Request" representing the @@ -13714,6 +14012,80 @@ func (c *EC2) DeleteTransitGatewayRouteTableWithContext(ctx aws.Context, input * return out, req.Send() } +const opDeleteTransitGatewayRouteTableAnnouncement = "DeleteTransitGatewayRouteTableAnnouncement" + +// DeleteTransitGatewayRouteTableAnnouncementRequest generates a "aws/request.Request" representing the +// client's request for the DeleteTransitGatewayRouteTableAnnouncement operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DeleteTransitGatewayRouteTableAnnouncement for more information on using the DeleteTransitGatewayRouteTableAnnouncement +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DeleteTransitGatewayRouteTableAnnouncementRequest method. +// req, resp := client.DeleteTransitGatewayRouteTableAnnouncementRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteTransitGatewayRouteTableAnnouncement +func (c *EC2) DeleteTransitGatewayRouteTableAnnouncementRequest(input *DeleteTransitGatewayRouteTableAnnouncementInput) (req *request.Request, output *DeleteTransitGatewayRouteTableAnnouncementOutput) { + op := &request.Operation{ + Name: opDeleteTransitGatewayRouteTableAnnouncement, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &DeleteTransitGatewayRouteTableAnnouncementInput{} + } + + output = &DeleteTransitGatewayRouteTableAnnouncementOutput{} + req = c.newRequest(op, input, output) + return +} + +// DeleteTransitGatewayRouteTableAnnouncement API operation for Amazon Elastic Compute Cloud. +// +// Advertises to the transit gateway that a transit gateway route table is deleted. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DeleteTransitGatewayRouteTableAnnouncement for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DeleteTransitGatewayRouteTableAnnouncement +func (c *EC2) DeleteTransitGatewayRouteTableAnnouncement(input *DeleteTransitGatewayRouteTableAnnouncementInput) (*DeleteTransitGatewayRouteTableAnnouncementOutput, error) { + req, out := c.DeleteTransitGatewayRouteTableAnnouncementRequest(input) + return out, req.Send() +} + +// DeleteTransitGatewayRouteTableAnnouncementWithContext is the same as DeleteTransitGatewayRouteTableAnnouncement with the addition of +// the ability to pass a context and additional request options. +// +// See DeleteTransitGatewayRouteTableAnnouncement for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DeleteTransitGatewayRouteTableAnnouncementWithContext(ctx aws.Context, input *DeleteTransitGatewayRouteTableAnnouncementInput, opts ...request.Option) (*DeleteTransitGatewayRouteTableAnnouncementOutput, error) { + req, out := c.DeleteTransitGatewayRouteTableAnnouncementRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + const opDeleteTransitGatewayVpcAttachment = "DeleteTransitGatewayVpcAttachment" // DeleteTransitGatewayVpcAttachmentRequest generates a "aws/request.Request" representing the @@ -28627,6 +28999,270 @@ func (c *EC2) DescribeTransitGatewayPeeringAttachmentsPagesWithContext(ctx aws.C return p.Err() } +const opDescribeTransitGatewayPolicyTables = "DescribeTransitGatewayPolicyTables" + +// DescribeTransitGatewayPolicyTablesRequest generates a "aws/request.Request" representing the +// client's request for the DescribeTransitGatewayPolicyTables operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeTransitGatewayPolicyTables for more information on using the DescribeTransitGatewayPolicyTables +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeTransitGatewayPolicyTablesRequest method. +// req, resp := client.DescribeTransitGatewayPolicyTablesRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeTransitGatewayPolicyTables +func (c *EC2) DescribeTransitGatewayPolicyTablesRequest(input *DescribeTransitGatewayPolicyTablesInput) (req *request.Request, output *DescribeTransitGatewayPolicyTablesOutput) { + op := &request.Operation{ + Name: opDescribeTransitGatewayPolicyTables, + HTTPMethod: "POST", + HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, + } + + if input == nil { + input = &DescribeTransitGatewayPolicyTablesInput{} + } + + output = &DescribeTransitGatewayPolicyTablesOutput{} + req = c.newRequest(op, input, output) + return +} + +// DescribeTransitGatewayPolicyTables API operation for Amazon Elastic Compute Cloud. +// +// Describes one or more transit gateway route policy tables. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DescribeTransitGatewayPolicyTables for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeTransitGatewayPolicyTables +func (c *EC2) DescribeTransitGatewayPolicyTables(input *DescribeTransitGatewayPolicyTablesInput) (*DescribeTransitGatewayPolicyTablesOutput, error) { + req, out := c.DescribeTransitGatewayPolicyTablesRequest(input) + return out, req.Send() +} + +// DescribeTransitGatewayPolicyTablesWithContext is the same as DescribeTransitGatewayPolicyTables with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeTransitGatewayPolicyTables for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeTransitGatewayPolicyTablesWithContext(ctx aws.Context, input *DescribeTransitGatewayPolicyTablesInput, opts ...request.Option) (*DescribeTransitGatewayPolicyTablesOutput, error) { + req, out := c.DescribeTransitGatewayPolicyTablesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeTransitGatewayPolicyTablesPages iterates over the pages of a DescribeTransitGatewayPolicyTables operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See DescribeTransitGatewayPolicyTables method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. +// +// // Example iterating over at most 3 pages of a DescribeTransitGatewayPolicyTables operation. +// pageNum := 0 +// err := client.DescribeTransitGatewayPolicyTablesPages(params, +// func(page *ec2.DescribeTransitGatewayPolicyTablesOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) +// +func (c *EC2) DescribeTransitGatewayPolicyTablesPages(input *DescribeTransitGatewayPolicyTablesInput, fn func(*DescribeTransitGatewayPolicyTablesOutput, bool) bool) error { + return c.DescribeTransitGatewayPolicyTablesPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeTransitGatewayPolicyTablesPagesWithContext same as DescribeTransitGatewayPolicyTablesPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeTransitGatewayPolicyTablesPagesWithContext(ctx aws.Context, input *DescribeTransitGatewayPolicyTablesInput, fn func(*DescribeTransitGatewayPolicyTablesOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeTransitGatewayPolicyTablesInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeTransitGatewayPolicyTablesRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeTransitGatewayPolicyTablesOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opDescribeTransitGatewayRouteTableAnnouncements = "DescribeTransitGatewayRouteTableAnnouncements" + +// DescribeTransitGatewayRouteTableAnnouncementsRequest generates a "aws/request.Request" representing the +// client's request for the DescribeTransitGatewayRouteTableAnnouncements operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DescribeTransitGatewayRouteTableAnnouncements for more information on using the DescribeTransitGatewayRouteTableAnnouncements +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DescribeTransitGatewayRouteTableAnnouncementsRequest method. +// req, resp := client.DescribeTransitGatewayRouteTableAnnouncementsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeTransitGatewayRouteTableAnnouncements +func (c *EC2) DescribeTransitGatewayRouteTableAnnouncementsRequest(input *DescribeTransitGatewayRouteTableAnnouncementsInput) (req *request.Request, output *DescribeTransitGatewayRouteTableAnnouncementsOutput) { + op := &request.Operation{ + Name: opDescribeTransitGatewayRouteTableAnnouncements, + HTTPMethod: "POST", + HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, + } + + if input == nil { + input = &DescribeTransitGatewayRouteTableAnnouncementsInput{} + } + + output = &DescribeTransitGatewayRouteTableAnnouncementsOutput{} + req = c.newRequest(op, input, output) + return +} + +// DescribeTransitGatewayRouteTableAnnouncements API operation for Amazon Elastic Compute Cloud. +// +// Describes one or more transit gateway route table advertisements. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DescribeTransitGatewayRouteTableAnnouncements for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DescribeTransitGatewayRouteTableAnnouncements +func (c *EC2) DescribeTransitGatewayRouteTableAnnouncements(input *DescribeTransitGatewayRouteTableAnnouncementsInput) (*DescribeTransitGatewayRouteTableAnnouncementsOutput, error) { + req, out := c.DescribeTransitGatewayRouteTableAnnouncementsRequest(input) + return out, req.Send() +} + +// DescribeTransitGatewayRouteTableAnnouncementsWithContext is the same as DescribeTransitGatewayRouteTableAnnouncements with the addition of +// the ability to pass a context and additional request options. +// +// See DescribeTransitGatewayRouteTableAnnouncements for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeTransitGatewayRouteTableAnnouncementsWithContext(ctx aws.Context, input *DescribeTransitGatewayRouteTableAnnouncementsInput, opts ...request.Option) (*DescribeTransitGatewayRouteTableAnnouncementsOutput, error) { + req, out := c.DescribeTransitGatewayRouteTableAnnouncementsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// DescribeTransitGatewayRouteTableAnnouncementsPages iterates over the pages of a DescribeTransitGatewayRouteTableAnnouncements operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See DescribeTransitGatewayRouteTableAnnouncements method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. +// +// // Example iterating over at most 3 pages of a DescribeTransitGatewayRouteTableAnnouncements operation. +// pageNum := 0 +// err := client.DescribeTransitGatewayRouteTableAnnouncementsPages(params, +// func(page *ec2.DescribeTransitGatewayRouteTableAnnouncementsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) +// +func (c *EC2) DescribeTransitGatewayRouteTableAnnouncementsPages(input *DescribeTransitGatewayRouteTableAnnouncementsInput, fn func(*DescribeTransitGatewayRouteTableAnnouncementsOutput, bool) bool) error { + return c.DescribeTransitGatewayRouteTableAnnouncementsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// DescribeTransitGatewayRouteTableAnnouncementsPagesWithContext same as DescribeTransitGatewayRouteTableAnnouncementsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DescribeTransitGatewayRouteTableAnnouncementsPagesWithContext(ctx aws.Context, input *DescribeTransitGatewayRouteTableAnnouncementsInput, fn func(*DescribeTransitGatewayRouteTableAnnouncementsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *DescribeTransitGatewayRouteTableAnnouncementsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.DescribeTransitGatewayRouteTableAnnouncementsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*DescribeTransitGatewayRouteTableAnnouncementsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + const opDescribeTransitGatewayRouteTables = "DescribeTransitGatewayRouteTables" // DescribeTransitGatewayRouteTablesRequest generates a "aws/request.Request" representing the @@ -32941,6 +33577,80 @@ func (c *EC2) DisassociateTransitGatewayMulticastDomainWithContext(ctx aws.Conte return out, req.Send() } +const opDisassociateTransitGatewayPolicyTable = "DisassociateTransitGatewayPolicyTable" + +// DisassociateTransitGatewayPolicyTableRequest generates a "aws/request.Request" representing the +// client's request for the DisassociateTransitGatewayPolicyTable operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See DisassociateTransitGatewayPolicyTable for more information on using the DisassociateTransitGatewayPolicyTable +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the DisassociateTransitGatewayPolicyTableRequest method. +// req, resp := client.DisassociateTransitGatewayPolicyTableRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateTransitGatewayPolicyTable +func (c *EC2) DisassociateTransitGatewayPolicyTableRequest(input *DisassociateTransitGatewayPolicyTableInput) (req *request.Request, output *DisassociateTransitGatewayPolicyTableOutput) { + op := &request.Operation{ + Name: opDisassociateTransitGatewayPolicyTable, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &DisassociateTransitGatewayPolicyTableInput{} + } + + output = &DisassociateTransitGatewayPolicyTableOutput{} + req = c.newRequest(op, input, output) + return +} + +// DisassociateTransitGatewayPolicyTable API operation for Amazon Elastic Compute Cloud. +// +// Removes the association between an an attachment and a policy table. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation DisassociateTransitGatewayPolicyTable for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/DisassociateTransitGatewayPolicyTable +func (c *EC2) DisassociateTransitGatewayPolicyTable(input *DisassociateTransitGatewayPolicyTableInput) (*DisassociateTransitGatewayPolicyTableOutput, error) { + req, out := c.DisassociateTransitGatewayPolicyTableRequest(input) + return out, req.Send() +} + +// DisassociateTransitGatewayPolicyTableWithContext is the same as DisassociateTransitGatewayPolicyTable with the addition of +// the ability to pass a context and additional request options. +// +// See DisassociateTransitGatewayPolicyTable for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) DisassociateTransitGatewayPolicyTableWithContext(ctx aws.Context, input *DisassociateTransitGatewayPolicyTableInput, opts ...request.Option) (*DisassociateTransitGatewayPolicyTableOutput, error) { + req, out := c.DisassociateTransitGatewayPolicyTableRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + const opDisassociateTransitGatewayRouteTable = "DisassociateTransitGatewayRouteTable" // DisassociateTransitGatewayRouteTableRequest generates a "aws/request.Request" representing the @@ -37402,6 +38112,212 @@ func (c *EC2) GetTransitGatewayMulticastDomainAssociationsPagesWithContext(ctx a return p.Err() } +const opGetTransitGatewayPolicyTableAssociations = "GetTransitGatewayPolicyTableAssociations" + +// GetTransitGatewayPolicyTableAssociationsRequest generates a "aws/request.Request" representing the +// client's request for the GetTransitGatewayPolicyTableAssociations operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetTransitGatewayPolicyTableAssociations for more information on using the GetTransitGatewayPolicyTableAssociations +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetTransitGatewayPolicyTableAssociationsRequest method. +// req, resp := client.GetTransitGatewayPolicyTableAssociationsRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetTransitGatewayPolicyTableAssociations +func (c *EC2) GetTransitGatewayPolicyTableAssociationsRequest(input *GetTransitGatewayPolicyTableAssociationsInput) (req *request.Request, output *GetTransitGatewayPolicyTableAssociationsOutput) { + op := &request.Operation{ + Name: opGetTransitGatewayPolicyTableAssociations, + HTTPMethod: "POST", + HTTPPath: "/", + Paginator: &request.Paginator{ + InputTokens: []string{"NextToken"}, + OutputTokens: []string{"NextToken"}, + LimitToken: "MaxResults", + TruncationToken: "", + }, + } + + if input == nil { + input = &GetTransitGatewayPolicyTableAssociationsInput{} + } + + output = &GetTransitGatewayPolicyTableAssociationsOutput{} + req = c.newRequest(op, input, output) + return +} + +// GetTransitGatewayPolicyTableAssociations API operation for Amazon Elastic Compute Cloud. +// +// Gets a list of the transit gateway policy table associations. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation GetTransitGatewayPolicyTableAssociations for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetTransitGatewayPolicyTableAssociations +func (c *EC2) GetTransitGatewayPolicyTableAssociations(input *GetTransitGatewayPolicyTableAssociationsInput) (*GetTransitGatewayPolicyTableAssociationsOutput, error) { + req, out := c.GetTransitGatewayPolicyTableAssociationsRequest(input) + return out, req.Send() +} + +// GetTransitGatewayPolicyTableAssociationsWithContext is the same as GetTransitGatewayPolicyTableAssociations with the addition of +// the ability to pass a context and additional request options. +// +// See GetTransitGatewayPolicyTableAssociations for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) GetTransitGatewayPolicyTableAssociationsWithContext(ctx aws.Context, input *GetTransitGatewayPolicyTableAssociationsInput, opts ...request.Option) (*GetTransitGatewayPolicyTableAssociationsOutput, error) { + req, out := c.GetTransitGatewayPolicyTableAssociationsRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + +// GetTransitGatewayPolicyTableAssociationsPages iterates over the pages of a GetTransitGatewayPolicyTableAssociations operation, +// calling the "fn" function with the response data for each page. To stop +// iterating, return false from the fn function. +// +// See GetTransitGatewayPolicyTableAssociations method for more information on how to use this operation. +// +// Note: This operation can generate multiple requests to a service. +// +// // Example iterating over at most 3 pages of a GetTransitGatewayPolicyTableAssociations operation. +// pageNum := 0 +// err := client.GetTransitGatewayPolicyTableAssociationsPages(params, +// func(page *ec2.GetTransitGatewayPolicyTableAssociationsOutput, lastPage bool) bool { +// pageNum++ +// fmt.Println(page) +// return pageNum <= 3 +// }) +// +func (c *EC2) GetTransitGatewayPolicyTableAssociationsPages(input *GetTransitGatewayPolicyTableAssociationsInput, fn func(*GetTransitGatewayPolicyTableAssociationsOutput, bool) bool) error { + return c.GetTransitGatewayPolicyTableAssociationsPagesWithContext(aws.BackgroundContext(), input, fn) +} + +// GetTransitGatewayPolicyTableAssociationsPagesWithContext same as GetTransitGatewayPolicyTableAssociationsPages except +// it takes a Context and allows setting request options on the pages. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) GetTransitGatewayPolicyTableAssociationsPagesWithContext(ctx aws.Context, input *GetTransitGatewayPolicyTableAssociationsInput, fn func(*GetTransitGatewayPolicyTableAssociationsOutput, bool) bool, opts ...request.Option) error { + p := request.Pagination{ + NewRequest: func() (*request.Request, error) { + var inCpy *GetTransitGatewayPolicyTableAssociationsInput + if input != nil { + tmp := *input + inCpy = &tmp + } + req, _ := c.GetTransitGatewayPolicyTableAssociationsRequest(inCpy) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return req, nil + }, + } + + for p.Next() { + if !fn(p.Page().(*GetTransitGatewayPolicyTableAssociationsOutput), !p.HasNextPage()) { + break + } + } + + return p.Err() +} + +const opGetTransitGatewayPolicyTableEntries = "GetTransitGatewayPolicyTableEntries" + +// GetTransitGatewayPolicyTableEntriesRequest generates a "aws/request.Request" representing the +// client's request for the GetTransitGatewayPolicyTableEntries operation. The "output" return +// value will be populated with the request's response once the request completes +// successfully. +// +// Use "Send" method on the returned Request to send the API call to the service. +// the "output" return value is not valid until after Send returns without error. +// +// See GetTransitGatewayPolicyTableEntries for more information on using the GetTransitGatewayPolicyTableEntries +// API call, and error handling. +// +// This method is useful when you want to inject custom logic or configuration +// into the SDK's request lifecycle. Such as custom headers, or retry logic. +// +// +// // Example sending a request using the GetTransitGatewayPolicyTableEntriesRequest method. +// req, resp := client.GetTransitGatewayPolicyTableEntriesRequest(params) +// +// err := req.Send() +// if err == nil { // resp is now filled +// fmt.Println(resp) +// } +// +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetTransitGatewayPolicyTableEntries +func (c *EC2) GetTransitGatewayPolicyTableEntriesRequest(input *GetTransitGatewayPolicyTableEntriesInput) (req *request.Request, output *GetTransitGatewayPolicyTableEntriesOutput) { + op := &request.Operation{ + Name: opGetTransitGatewayPolicyTableEntries, + HTTPMethod: "POST", + HTTPPath: "/", + } + + if input == nil { + input = &GetTransitGatewayPolicyTableEntriesInput{} + } + + output = &GetTransitGatewayPolicyTableEntriesOutput{} + req = c.newRequest(op, input, output) + return +} + +// GetTransitGatewayPolicyTableEntries API operation for Amazon Elastic Compute Cloud. +// +// Returns a list of transit gateway policy table entries. +// +// Returns awserr.Error for service API and SDK errors. Use runtime type assertions +// with awserr.Error's Code and Message methods to get detailed information about +// the error. +// +// See the AWS API reference guide for Amazon Elastic Compute Cloud's +// API operation GetTransitGatewayPolicyTableEntries for usage and error information. +// See also, https://docs.aws.amazon.com/goto/WebAPI/ec2-2016-11-15/GetTransitGatewayPolicyTableEntries +func (c *EC2) GetTransitGatewayPolicyTableEntries(input *GetTransitGatewayPolicyTableEntriesInput) (*GetTransitGatewayPolicyTableEntriesOutput, error) { + req, out := c.GetTransitGatewayPolicyTableEntriesRequest(input) + return out, req.Send() +} + +// GetTransitGatewayPolicyTableEntriesWithContext is the same as GetTransitGatewayPolicyTableEntries with the addition of +// the ability to pass a context and additional request options. +// +// See GetTransitGatewayPolicyTableEntries for details on how to use this API operation. +// +// The context must be non-nil and will be used for request cancellation. If +// the context is nil a panic will occur. In the future the SDK may create +// sub-contexts for http.Requests. See https://golang.org/pkg/context/ +// for more information on using Contexts. +func (c *EC2) GetTransitGatewayPolicyTableEntriesWithContext(ctx aws.Context, input *GetTransitGatewayPolicyTableEntriesInput, opts ...request.Option) (*GetTransitGatewayPolicyTableEntriesOutput, error) { + req, out := c.GetTransitGatewayPolicyTableEntriesRequest(input) + req.SetContext(ctx) + req.ApplyOptions(opts...) + return out, req.Send() +} + const opGetTransitGatewayPrefixListReferences = "GetTransitGatewayPrefixListReferences" // GetTransitGatewayPrefixListReferencesRequest generates a "aws/request.Request" representing the @@ -52791,6 +53707,111 @@ func (s *AssociateTransitGatewayMulticastDomainOutput) SetAssociations(v *Transi return s } +type AssociateTransitGatewayPolicyTableInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the transit gateway attachment to associate with the policy table. + // + // TransitGatewayAttachmentId is a required field + TransitGatewayAttachmentId *string `type:"string" required:"true"` + + // The ID of the transit gateway policy table to associate with the transit + // gateway attachment. + // + // TransitGatewayPolicyTableId is a required field + TransitGatewayPolicyTableId *string `type:"string" required:"true"` +} + +// String returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s AssociateTransitGatewayPolicyTableInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s AssociateTransitGatewayPolicyTableInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *AssociateTransitGatewayPolicyTableInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "AssociateTransitGatewayPolicyTableInput"} + if s.TransitGatewayAttachmentId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayAttachmentId")) + } + if s.TransitGatewayPolicyTableId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayPolicyTableId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *AssociateTransitGatewayPolicyTableInput) SetDryRun(v bool) *AssociateTransitGatewayPolicyTableInput { + s.DryRun = &v + return s +} + +// SetTransitGatewayAttachmentId sets the TransitGatewayAttachmentId field's value. +func (s *AssociateTransitGatewayPolicyTableInput) SetTransitGatewayAttachmentId(v string) *AssociateTransitGatewayPolicyTableInput { + s.TransitGatewayAttachmentId = &v + return s +} + +// SetTransitGatewayPolicyTableId sets the TransitGatewayPolicyTableId field's value. +func (s *AssociateTransitGatewayPolicyTableInput) SetTransitGatewayPolicyTableId(v string) *AssociateTransitGatewayPolicyTableInput { + s.TransitGatewayPolicyTableId = &v + return s +} + +type AssociateTransitGatewayPolicyTableOutput struct { + _ struct{} `type:"structure"` + + // Describes the association of a transit gateway and a transit gateway policy + // table. + Association *TransitGatewayPolicyTableAssociation `locationName:"association" type:"structure"` +} + +// String returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s AssociateTransitGatewayPolicyTableOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s AssociateTransitGatewayPolicyTableOutput) GoString() string { + return s.String() +} + +// SetAssociation sets the Association field's value. +func (s *AssociateTransitGatewayPolicyTableOutput) SetAssociation(v *TransitGatewayPolicyTableAssociation) *AssociateTransitGatewayPolicyTableOutput { + s.Association = v + return s +} + type AssociateTransitGatewayRouteTableInput struct { _ struct{} `type:"structure"` @@ -68524,6 +69545,8 @@ type CreateTransitGatewayPeeringAttachmentInput struct { // it is UnauthorizedOperation. DryRun *bool `type:"boolean"` + Options *CreateTransitGatewayPeeringAttachmentRequestOptions `type:"structure"` + // The ID of the Amazon Web Services account that owns the peer transit gateway. // // PeerAccountId is a required field @@ -68594,6 +69617,12 @@ func (s *CreateTransitGatewayPeeringAttachmentInput) SetDryRun(v bool) *CreateTr return s } +// SetOptions sets the Options field's value. +func (s *CreateTransitGatewayPeeringAttachmentInput) SetOptions(v *CreateTransitGatewayPeeringAttachmentRequestOptions) *CreateTransitGatewayPeeringAttachmentInput { + s.Options = v + return s +} + // SetPeerAccountId sets the PeerAccountId field's value. func (s *CreateTransitGatewayPeeringAttachmentInput) SetPeerAccountId(v string) *CreateTransitGatewayPeeringAttachmentInput { s.PeerAccountId = &v @@ -68655,6 +69684,135 @@ func (s *CreateTransitGatewayPeeringAttachmentOutput) SetTransitGatewayPeeringAt return s } +type CreateTransitGatewayPeeringAttachmentRequestOptions struct { + _ struct{} `type:"structure"` + + DynamicRouting *string `type:"string" enum:"DynamicRoutingValue"` +} + +// String returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s CreateTransitGatewayPeeringAttachmentRequestOptions) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s CreateTransitGatewayPeeringAttachmentRequestOptions) GoString() string { + return s.String() +} + +// SetDynamicRouting sets the DynamicRouting field's value. +func (s *CreateTransitGatewayPeeringAttachmentRequestOptions) SetDynamicRouting(v string) *CreateTransitGatewayPeeringAttachmentRequestOptions { + s.DynamicRouting = &v + return s +} + +type CreateTransitGatewayPolicyTableInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The tags specification for the transit gateway policy table created during + // the request. + TagSpecifications []*TagSpecification `locationNameList:"item" type:"list"` + + // The ID of the transit gateway used for the policy table. + // + // TransitGatewayId is a required field + TransitGatewayId *string `type:"string" required:"true"` +} + +// String returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s CreateTransitGatewayPolicyTableInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s CreateTransitGatewayPolicyTableInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateTransitGatewayPolicyTableInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateTransitGatewayPolicyTableInput"} + if s.TransitGatewayId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateTransitGatewayPolicyTableInput) SetDryRun(v bool) *CreateTransitGatewayPolicyTableInput { + s.DryRun = &v + return s +} + +// SetTagSpecifications sets the TagSpecifications field's value. +func (s *CreateTransitGatewayPolicyTableInput) SetTagSpecifications(v []*TagSpecification) *CreateTransitGatewayPolicyTableInput { + s.TagSpecifications = v + return s +} + +// SetTransitGatewayId sets the TransitGatewayId field's value. +func (s *CreateTransitGatewayPolicyTableInput) SetTransitGatewayId(v string) *CreateTransitGatewayPolicyTableInput { + s.TransitGatewayId = &v + return s +} + +type CreateTransitGatewayPolicyTableOutput struct { + _ struct{} `type:"structure"` + + // Describes the created transit gateway policy table. + TransitGatewayPolicyTable *TransitGatewayPolicyTable `locationName:"transitGatewayPolicyTable" type:"structure"` +} + +// String returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s CreateTransitGatewayPolicyTableOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s CreateTransitGatewayPolicyTableOutput) GoString() string { + return s.String() +} + +// SetTransitGatewayPolicyTable sets the TransitGatewayPolicyTable field's value. +func (s *CreateTransitGatewayPolicyTableOutput) SetTransitGatewayPolicyTable(v *TransitGatewayPolicyTable) *CreateTransitGatewayPolicyTableOutput { + s.TransitGatewayPolicyTable = v + return s +} + type CreateTransitGatewayPrefixListReferenceInput struct { _ struct{} `type:"structure"` @@ -68898,6 +70056,118 @@ func (s *CreateTransitGatewayRouteOutput) SetRoute(v *TransitGatewayRoute) *Crea return s } +type CreateTransitGatewayRouteTableAnnouncementInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the peering attachment. + // + // PeeringAttachmentId is a required field + PeeringAttachmentId *string `type:"string" required:"true"` + + // The tags specifications applied to the transit gateway route table announcement. + TagSpecifications []*TagSpecification `locationName:"TagSpecification" locationNameList:"item" type:"list"` + + // The ID of the transit gateway route table. + // + // TransitGatewayRouteTableId is a required field + TransitGatewayRouteTableId *string `type:"string" required:"true"` +} + +// String returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s CreateTransitGatewayRouteTableAnnouncementInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s CreateTransitGatewayRouteTableAnnouncementInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *CreateTransitGatewayRouteTableAnnouncementInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "CreateTransitGatewayRouteTableAnnouncementInput"} + if s.PeeringAttachmentId == nil { + invalidParams.Add(request.NewErrParamRequired("PeeringAttachmentId")) + } + if s.TransitGatewayRouteTableId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayRouteTableId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *CreateTransitGatewayRouteTableAnnouncementInput) SetDryRun(v bool) *CreateTransitGatewayRouteTableAnnouncementInput { + s.DryRun = &v + return s +} + +// SetPeeringAttachmentId sets the PeeringAttachmentId field's value. +func (s *CreateTransitGatewayRouteTableAnnouncementInput) SetPeeringAttachmentId(v string) *CreateTransitGatewayRouteTableAnnouncementInput { + s.PeeringAttachmentId = &v + return s +} + +// SetTagSpecifications sets the TagSpecifications field's value. +func (s *CreateTransitGatewayRouteTableAnnouncementInput) SetTagSpecifications(v []*TagSpecification) *CreateTransitGatewayRouteTableAnnouncementInput { + s.TagSpecifications = v + return s +} + +// SetTransitGatewayRouteTableId sets the TransitGatewayRouteTableId field's value. +func (s *CreateTransitGatewayRouteTableAnnouncementInput) SetTransitGatewayRouteTableId(v string) *CreateTransitGatewayRouteTableAnnouncementInput { + s.TransitGatewayRouteTableId = &v + return s +} + +type CreateTransitGatewayRouteTableAnnouncementOutput struct { + _ struct{} `type:"structure"` + + // Provides details about the transit gateway route table announcement. + TransitGatewayRouteTableAnnouncement *TransitGatewayRouteTableAnnouncement `locationName:"transitGatewayRouteTableAnnouncement" type:"structure"` +} + +// String returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s CreateTransitGatewayRouteTableAnnouncementOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s CreateTransitGatewayRouteTableAnnouncementOutput) GoString() string { + return s.String() +} + +// SetTransitGatewayRouteTableAnnouncement sets the TransitGatewayRouteTableAnnouncement field's value. +func (s *CreateTransitGatewayRouteTableAnnouncementOutput) SetTransitGatewayRouteTableAnnouncement(v *TransitGatewayRouteTableAnnouncement) *CreateTransitGatewayRouteTableAnnouncementOutput { + s.TransitGatewayRouteTableAnnouncement = v + return s +} + type CreateTransitGatewayRouteTableInput struct { _ struct{} `type:"structure"` @@ -75582,6 +76852,95 @@ func (s *DeleteTransitGatewayPeeringAttachmentOutput) SetTransitGatewayPeeringAt return s } +type DeleteTransitGatewayPolicyTableInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The transit gateway policy table to delete. + // + // TransitGatewayPolicyTableId is a required field + TransitGatewayPolicyTableId *string `type:"string" required:"true"` +} + +// String returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s DeleteTransitGatewayPolicyTableInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s DeleteTransitGatewayPolicyTableInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteTransitGatewayPolicyTableInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteTransitGatewayPolicyTableInput"} + if s.TransitGatewayPolicyTableId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayPolicyTableId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteTransitGatewayPolicyTableInput) SetDryRun(v bool) *DeleteTransitGatewayPolicyTableInput { + s.DryRun = &v + return s +} + +// SetTransitGatewayPolicyTableId sets the TransitGatewayPolicyTableId field's value. +func (s *DeleteTransitGatewayPolicyTableInput) SetTransitGatewayPolicyTableId(v string) *DeleteTransitGatewayPolicyTableInput { + s.TransitGatewayPolicyTableId = &v + return s +} + +type DeleteTransitGatewayPolicyTableOutput struct { + _ struct{} `type:"structure"` + + // Provides details about the deleted transit gateway policy table. + TransitGatewayPolicyTable *TransitGatewayPolicyTable `locationName:"transitGatewayPolicyTable" type:"structure"` +} + +// String returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s DeleteTransitGatewayPolicyTableOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s DeleteTransitGatewayPolicyTableOutput) GoString() string { + return s.String() +} + +// SetTransitGatewayPolicyTable sets the TransitGatewayPolicyTable field's value. +func (s *DeleteTransitGatewayPolicyTableOutput) SetTransitGatewayPolicyTable(v *TransitGatewayPolicyTable) *DeleteTransitGatewayPolicyTableOutput { + s.TransitGatewayPolicyTable = v + return s +} + type DeleteTransitGatewayPrefixListReferenceInput struct { _ struct{} `type:"structure"` @@ -75788,6 +77147,95 @@ func (s *DeleteTransitGatewayRouteOutput) SetRoute(v *TransitGatewayRoute) *Dele return s } +type DeleteTransitGatewayRouteTableAnnouncementInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The transit gateway route table ID that's being deleted. + // + // TransitGatewayRouteTableAnnouncementId is a required field + TransitGatewayRouteTableAnnouncementId *string `type:"string" required:"true"` +} + +// String returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s DeleteTransitGatewayRouteTableAnnouncementInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s DeleteTransitGatewayRouteTableAnnouncementInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DeleteTransitGatewayRouteTableAnnouncementInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DeleteTransitGatewayRouteTableAnnouncementInput"} + if s.TransitGatewayRouteTableAnnouncementId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayRouteTableAnnouncementId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DeleteTransitGatewayRouteTableAnnouncementInput) SetDryRun(v bool) *DeleteTransitGatewayRouteTableAnnouncementInput { + s.DryRun = &v + return s +} + +// SetTransitGatewayRouteTableAnnouncementId sets the TransitGatewayRouteTableAnnouncementId field's value. +func (s *DeleteTransitGatewayRouteTableAnnouncementInput) SetTransitGatewayRouteTableAnnouncementId(v string) *DeleteTransitGatewayRouteTableAnnouncementInput { + s.TransitGatewayRouteTableAnnouncementId = &v + return s +} + +type DeleteTransitGatewayRouteTableAnnouncementOutput struct { + _ struct{} `type:"structure"` + + // Provides details about a deleted transit gateway route table. + TransitGatewayRouteTableAnnouncement *TransitGatewayRouteTableAnnouncement `locationName:"transitGatewayRouteTableAnnouncement" type:"structure"` +} + +// String returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s DeleteTransitGatewayRouteTableAnnouncementOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s DeleteTransitGatewayRouteTableAnnouncementOutput) GoString() string { + return s.String() +} + +// SetTransitGatewayRouteTableAnnouncement sets the TransitGatewayRouteTableAnnouncement field's value. +func (s *DeleteTransitGatewayRouteTableAnnouncementOutput) SetTransitGatewayRouteTableAnnouncement(v *TransitGatewayRouteTableAnnouncement) *DeleteTransitGatewayRouteTableAnnouncementOutput { + s.TransitGatewayRouteTableAnnouncement = v + return s +} + type DeleteTransitGatewayRouteTableInput struct { _ struct{} `type:"structure"` @@ -93644,6 +95092,254 @@ func (s *DescribeTransitGatewayPeeringAttachmentsOutput) SetTransitGatewayPeerin return s } +type DescribeTransitGatewayPolicyTablesInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The filters associated with the transit gateway policy table. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + MaxResults *int64 `min:"5" type:"integer"` + + // The token for the next page of results. + NextToken *string `type:"string"` + + // The IDs of the transit gateway policy tables. + TransitGatewayPolicyTableIds []*string `locationNameList:"item" type:"list"` +} + +// String returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s DescribeTransitGatewayPolicyTablesInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s DescribeTransitGatewayPolicyTablesInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeTransitGatewayPolicyTablesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeTransitGatewayPolicyTablesInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeTransitGatewayPolicyTablesInput) SetDryRun(v bool) *DescribeTransitGatewayPolicyTablesInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeTransitGatewayPolicyTablesInput) SetFilters(v []*Filter) *DescribeTransitGatewayPolicyTablesInput { + s.Filters = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeTransitGatewayPolicyTablesInput) SetMaxResults(v int64) *DescribeTransitGatewayPolicyTablesInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeTransitGatewayPolicyTablesInput) SetNextToken(v string) *DescribeTransitGatewayPolicyTablesInput { + s.NextToken = &v + return s +} + +// SetTransitGatewayPolicyTableIds sets the TransitGatewayPolicyTableIds field's value. +func (s *DescribeTransitGatewayPolicyTablesInput) SetTransitGatewayPolicyTableIds(v []*string) *DescribeTransitGatewayPolicyTablesInput { + s.TransitGatewayPolicyTableIds = v + return s +} + +type DescribeTransitGatewayPolicyTablesOutput struct { + _ struct{} `type:"structure"` + + // The token for the next page of results. + NextToken *string `locationName:"nextToken" type:"string"` + + // Describes the transit gateway policy tables. + TransitGatewayPolicyTables []*TransitGatewayPolicyTable `locationName:"transitGatewayPolicyTables" locationNameList:"item" type:"list"` +} + +// String returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s DescribeTransitGatewayPolicyTablesOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s DescribeTransitGatewayPolicyTablesOutput) GoString() string { + return s.String() +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeTransitGatewayPolicyTablesOutput) SetNextToken(v string) *DescribeTransitGatewayPolicyTablesOutput { + s.NextToken = &v + return s +} + +// SetTransitGatewayPolicyTables sets the TransitGatewayPolicyTables field's value. +func (s *DescribeTransitGatewayPolicyTablesOutput) SetTransitGatewayPolicyTables(v []*TransitGatewayPolicyTable) *DescribeTransitGatewayPolicyTablesOutput { + s.TransitGatewayPolicyTables = v + return s +} + +type DescribeTransitGatewayRouteTableAnnouncementsInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The filters associated with the transit gateway policy table. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + MaxResults *int64 `min:"5" type:"integer"` + + // The token for the next page of results. + NextToken *string `type:"string"` + + // The IDs of the transit gateway route tables that are being advertised. + TransitGatewayRouteTableAnnouncementIds []*string `locationNameList:"item" type:"list"` +} + +// String returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s DescribeTransitGatewayRouteTableAnnouncementsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s DescribeTransitGatewayRouteTableAnnouncementsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DescribeTransitGatewayRouteTableAnnouncementsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DescribeTransitGatewayRouteTableAnnouncementsInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DescribeTransitGatewayRouteTableAnnouncementsInput) SetDryRun(v bool) *DescribeTransitGatewayRouteTableAnnouncementsInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *DescribeTransitGatewayRouteTableAnnouncementsInput) SetFilters(v []*Filter) *DescribeTransitGatewayRouteTableAnnouncementsInput { + s.Filters = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *DescribeTransitGatewayRouteTableAnnouncementsInput) SetMaxResults(v int64) *DescribeTransitGatewayRouteTableAnnouncementsInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeTransitGatewayRouteTableAnnouncementsInput) SetNextToken(v string) *DescribeTransitGatewayRouteTableAnnouncementsInput { + s.NextToken = &v + return s +} + +// SetTransitGatewayRouteTableAnnouncementIds sets the TransitGatewayRouteTableAnnouncementIds field's value. +func (s *DescribeTransitGatewayRouteTableAnnouncementsInput) SetTransitGatewayRouteTableAnnouncementIds(v []*string) *DescribeTransitGatewayRouteTableAnnouncementsInput { + s.TransitGatewayRouteTableAnnouncementIds = v + return s +} + +type DescribeTransitGatewayRouteTableAnnouncementsOutput struct { + _ struct{} `type:"structure"` + + // The token for the next page of results. + NextToken *string `locationName:"nextToken" type:"string"` + + // Describes the transit gateway route table announcement. + TransitGatewayRouteTableAnnouncements []*TransitGatewayRouteTableAnnouncement `locationName:"transitGatewayRouteTableAnnouncements" locationNameList:"item" type:"list"` +} + +// String returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s DescribeTransitGatewayRouteTableAnnouncementsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s DescribeTransitGatewayRouteTableAnnouncementsOutput) GoString() string { + return s.String() +} + +// SetNextToken sets the NextToken field's value. +func (s *DescribeTransitGatewayRouteTableAnnouncementsOutput) SetNextToken(v string) *DescribeTransitGatewayRouteTableAnnouncementsOutput { + s.NextToken = &v + return s +} + +// SetTransitGatewayRouteTableAnnouncements sets the TransitGatewayRouteTableAnnouncements field's value. +func (s *DescribeTransitGatewayRouteTableAnnouncementsOutput) SetTransitGatewayRouteTableAnnouncements(v []*TransitGatewayRouteTableAnnouncement) *DescribeTransitGatewayRouteTableAnnouncementsOutput { + s.TransitGatewayRouteTableAnnouncements = v + return s +} + type DescribeTransitGatewayRouteTablesInput struct { _ struct{} `type:"structure"` @@ -98112,9 +99808,10 @@ type DisableTransitGatewayRouteTablePropagationInput struct { DryRun *bool `type:"boolean"` // The ID of the attachment. - // - // TransitGatewayAttachmentId is a required field - TransitGatewayAttachmentId *string `type:"string" required:"true"` + TransitGatewayAttachmentId *string `type:"string"` + + // The ID of the route table announcement. + TransitGatewayRouteTableAnnouncementId *string `type:"string"` // The ID of the propagation route table. // @@ -98143,9 +99840,6 @@ func (s DisableTransitGatewayRouteTablePropagationInput) GoString() string { // Validate inspects the fields of the type to determine if they are valid. func (s *DisableTransitGatewayRouteTablePropagationInput) Validate() error { invalidParams := request.ErrInvalidParams{Context: "DisableTransitGatewayRouteTablePropagationInput"} - if s.TransitGatewayAttachmentId == nil { - invalidParams.Add(request.NewErrParamRequired("TransitGatewayAttachmentId")) - } if s.TransitGatewayRouteTableId == nil { invalidParams.Add(request.NewErrParamRequired("TransitGatewayRouteTableId")) } @@ -98168,6 +99862,12 @@ func (s *DisableTransitGatewayRouteTablePropagationInput) SetTransitGatewayAttac return s } +// SetTransitGatewayRouteTableAnnouncementId sets the TransitGatewayRouteTableAnnouncementId field's value. +func (s *DisableTransitGatewayRouteTablePropagationInput) SetTransitGatewayRouteTableAnnouncementId(v string) *DisableTransitGatewayRouteTablePropagationInput { + s.TransitGatewayRouteTableAnnouncementId = &v + return s +} + // SetTransitGatewayRouteTableId sets the TransitGatewayRouteTableId field's value. func (s *DisableTransitGatewayRouteTablePropagationInput) SetTransitGatewayRouteTableId(v string) *DisableTransitGatewayRouteTablePropagationInput { s.TransitGatewayRouteTableId = &v @@ -99175,6 +100875,110 @@ func (s *DisassociateTransitGatewayMulticastDomainOutput) SetAssociations(v *Tra return s } +type DisassociateTransitGatewayPolicyTableInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The ID of the transit gateway attachment to disassociate from the policy + // table. + // + // TransitGatewayAttachmentId is a required field + TransitGatewayAttachmentId *string `type:"string" required:"true"` + + // The ID of the disassociated policy table. + // + // TransitGatewayPolicyTableId is a required field + TransitGatewayPolicyTableId *string `type:"string" required:"true"` +} + +// String returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s DisassociateTransitGatewayPolicyTableInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s DisassociateTransitGatewayPolicyTableInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *DisassociateTransitGatewayPolicyTableInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "DisassociateTransitGatewayPolicyTableInput"} + if s.TransitGatewayAttachmentId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayAttachmentId")) + } + if s.TransitGatewayPolicyTableId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayPolicyTableId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *DisassociateTransitGatewayPolicyTableInput) SetDryRun(v bool) *DisassociateTransitGatewayPolicyTableInput { + s.DryRun = &v + return s +} + +// SetTransitGatewayAttachmentId sets the TransitGatewayAttachmentId field's value. +func (s *DisassociateTransitGatewayPolicyTableInput) SetTransitGatewayAttachmentId(v string) *DisassociateTransitGatewayPolicyTableInput { + s.TransitGatewayAttachmentId = &v + return s +} + +// SetTransitGatewayPolicyTableId sets the TransitGatewayPolicyTableId field's value. +func (s *DisassociateTransitGatewayPolicyTableInput) SetTransitGatewayPolicyTableId(v string) *DisassociateTransitGatewayPolicyTableInput { + s.TransitGatewayPolicyTableId = &v + return s +} + +type DisassociateTransitGatewayPolicyTableOutput struct { + _ struct{} `type:"structure"` + + // Returns details about the transit gateway policy table disassociation. + Association *TransitGatewayPolicyTableAssociation `locationName:"association" type:"structure"` +} + +// String returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s DisassociateTransitGatewayPolicyTableOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s DisassociateTransitGatewayPolicyTableOutput) GoString() string { + return s.String() +} + +// SetAssociation sets the Association field's value. +func (s *DisassociateTransitGatewayPolicyTableOutput) SetAssociation(v *TransitGatewayPolicyTableAssociation) *DisassociateTransitGatewayPolicyTableOutput { + s.Association = v + return s +} + type DisassociateTransitGatewayRouteTableInput struct { _ struct{} `type:"structure"` @@ -101738,9 +103542,10 @@ type EnableTransitGatewayRouteTablePropagationInput struct { DryRun *bool `type:"boolean"` // The ID of the attachment. - // - // TransitGatewayAttachmentId is a required field - TransitGatewayAttachmentId *string `type:"string" required:"true"` + TransitGatewayAttachmentId *string `type:"string"` + + // The ID of the transit gateway route table announcement. + TransitGatewayRouteTableAnnouncementId *string `type:"string"` // The ID of the propagation route table. // @@ -101769,9 +103574,6 @@ func (s EnableTransitGatewayRouteTablePropagationInput) GoString() string { // Validate inspects the fields of the type to determine if they are valid. func (s *EnableTransitGatewayRouteTablePropagationInput) Validate() error { invalidParams := request.ErrInvalidParams{Context: "EnableTransitGatewayRouteTablePropagationInput"} - if s.TransitGatewayAttachmentId == nil { - invalidParams.Add(request.NewErrParamRequired("TransitGatewayAttachmentId")) - } if s.TransitGatewayRouteTableId == nil { invalidParams.Add(request.NewErrParamRequired("TransitGatewayRouteTableId")) } @@ -101794,6 +103596,12 @@ func (s *EnableTransitGatewayRouteTablePropagationInput) SetTransitGatewayAttach return s } +// SetTransitGatewayRouteTableAnnouncementId sets the TransitGatewayRouteTableAnnouncementId field's value. +func (s *EnableTransitGatewayRouteTablePropagationInput) SetTransitGatewayRouteTableAnnouncementId(v string) *EnableTransitGatewayRouteTablePropagationInput { + s.TransitGatewayRouteTableAnnouncementId = &v + return s +} + // SetTransitGatewayRouteTableId sets the TransitGatewayRouteTableId field's value. func (s *EnableTransitGatewayRouteTablePropagationInput) SetTransitGatewayRouteTableId(v string) *EnableTransitGatewayRouteTablePropagationInput { s.TransitGatewayRouteTableId = &v @@ -109641,6 +111449,255 @@ func (s *GetTransitGatewayMulticastDomainAssociationsOutput) SetNextToken(v stri return s } +type GetTransitGatewayPolicyTableAssociationsInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The filters associated with the transit gateway policy table. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + MaxResults *int64 `min:"5" type:"integer"` + + // The token for the next page of results. + NextToken *string `type:"string"` + + // The ID of the transit gateway policy table. + // + // TransitGatewayPolicyTableId is a required field + TransitGatewayPolicyTableId *string `type:"string" required:"true"` +} + +// String returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s GetTransitGatewayPolicyTableAssociationsInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s GetTransitGatewayPolicyTableAssociationsInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetTransitGatewayPolicyTableAssociationsInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetTransitGatewayPolicyTableAssociationsInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + if s.TransitGatewayPolicyTableId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayPolicyTableId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *GetTransitGatewayPolicyTableAssociationsInput) SetDryRun(v bool) *GetTransitGatewayPolicyTableAssociationsInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *GetTransitGatewayPolicyTableAssociationsInput) SetFilters(v []*Filter) *GetTransitGatewayPolicyTableAssociationsInput { + s.Filters = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *GetTransitGatewayPolicyTableAssociationsInput) SetMaxResults(v int64) *GetTransitGatewayPolicyTableAssociationsInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *GetTransitGatewayPolicyTableAssociationsInput) SetNextToken(v string) *GetTransitGatewayPolicyTableAssociationsInput { + s.NextToken = &v + return s +} + +// SetTransitGatewayPolicyTableId sets the TransitGatewayPolicyTableId field's value. +func (s *GetTransitGatewayPolicyTableAssociationsInput) SetTransitGatewayPolicyTableId(v string) *GetTransitGatewayPolicyTableAssociationsInput { + s.TransitGatewayPolicyTableId = &v + return s +} + +type GetTransitGatewayPolicyTableAssociationsOutput struct { + _ struct{} `type:"structure"` + + // Returns details about the transit gateway policy table association. + Associations []*TransitGatewayPolicyTableAssociation `locationName:"associations" locationNameList:"item" type:"list"` + + // The token for the next page of results. + NextToken *string `locationName:"nextToken" type:"string"` +} + +// String returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s GetTransitGatewayPolicyTableAssociationsOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s GetTransitGatewayPolicyTableAssociationsOutput) GoString() string { + return s.String() +} + +// SetAssociations sets the Associations field's value. +func (s *GetTransitGatewayPolicyTableAssociationsOutput) SetAssociations(v []*TransitGatewayPolicyTableAssociation) *GetTransitGatewayPolicyTableAssociationsOutput { + s.Associations = v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *GetTransitGatewayPolicyTableAssociationsOutput) SetNextToken(v string) *GetTransitGatewayPolicyTableAssociationsOutput { + s.NextToken = &v + return s +} + +type GetTransitGatewayPolicyTableEntriesInput struct { + _ struct{} `type:"structure"` + + // Checks whether you have the required permissions for the action, without + // actually making the request, and provides an error response. If you have + // the required permissions, the error response is DryRunOperation. Otherwise, + // it is UnauthorizedOperation. + DryRun *bool `type:"boolean"` + + // The filters associated with the transit gateway policy table. + Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"` + + // The maximum number of results to return with a single call. To retrieve the + // remaining results, make another call with the returned nextToken value. + MaxResults *int64 `min:"5" type:"integer"` + + // The token for the next page of results. + NextToken *string `type:"string"` + + // The ID of the transit gateway policy table. + // + // TransitGatewayPolicyTableId is a required field + TransitGatewayPolicyTableId *string `type:"string" required:"true"` +} + +// String returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s GetTransitGatewayPolicyTableEntriesInput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s GetTransitGatewayPolicyTableEntriesInput) GoString() string { + return s.String() +} + +// Validate inspects the fields of the type to determine if they are valid. +func (s *GetTransitGatewayPolicyTableEntriesInput) Validate() error { + invalidParams := request.ErrInvalidParams{Context: "GetTransitGatewayPolicyTableEntriesInput"} + if s.MaxResults != nil && *s.MaxResults < 5 { + invalidParams.Add(request.NewErrParamMinValue("MaxResults", 5)) + } + if s.TransitGatewayPolicyTableId == nil { + invalidParams.Add(request.NewErrParamRequired("TransitGatewayPolicyTableId")) + } + + if invalidParams.Len() > 0 { + return invalidParams + } + return nil +} + +// SetDryRun sets the DryRun field's value. +func (s *GetTransitGatewayPolicyTableEntriesInput) SetDryRun(v bool) *GetTransitGatewayPolicyTableEntriesInput { + s.DryRun = &v + return s +} + +// SetFilters sets the Filters field's value. +func (s *GetTransitGatewayPolicyTableEntriesInput) SetFilters(v []*Filter) *GetTransitGatewayPolicyTableEntriesInput { + s.Filters = v + return s +} + +// SetMaxResults sets the MaxResults field's value. +func (s *GetTransitGatewayPolicyTableEntriesInput) SetMaxResults(v int64) *GetTransitGatewayPolicyTableEntriesInput { + s.MaxResults = &v + return s +} + +// SetNextToken sets the NextToken field's value. +func (s *GetTransitGatewayPolicyTableEntriesInput) SetNextToken(v string) *GetTransitGatewayPolicyTableEntriesInput { + s.NextToken = &v + return s +} + +// SetTransitGatewayPolicyTableId sets the TransitGatewayPolicyTableId field's value. +func (s *GetTransitGatewayPolicyTableEntriesInput) SetTransitGatewayPolicyTableId(v string) *GetTransitGatewayPolicyTableEntriesInput { + s.TransitGatewayPolicyTableId = &v + return s +} + +type GetTransitGatewayPolicyTableEntriesOutput struct { + _ struct{} `type:"structure"` + + // The entries for the transit gateway policy table. + TransitGatewayPolicyTableEntries []*TransitGatewayPolicyTableEntry `locationName:"transitGatewayPolicyTableEntries" locationNameList:"item" type:"list"` +} + +// String returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s GetTransitGatewayPolicyTableEntriesOutput) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s GetTransitGatewayPolicyTableEntriesOutput) GoString() string { + return s.String() +} + +// SetTransitGatewayPolicyTableEntries sets the TransitGatewayPolicyTableEntries field's value. +func (s *GetTransitGatewayPolicyTableEntriesOutput) SetTransitGatewayPolicyTableEntries(v []*TransitGatewayPolicyTableEntry) *GetTransitGatewayPolicyTableEntriesOutput { + s.TransitGatewayPolicyTableEntries = v + return s +} + type GetTransitGatewayPrefixListReferencesInput struct { _ struct{} `type:"structure"` @@ -129654,6 +131711,11 @@ type ModifyTransitGatewayOptions struct { // CIDR block or larger for IPv4, or a size /64 CIDR block or larger for IPv6. AddTransitGatewayCidrBlocks []*string `locationNameList:"item" type:"list"` + // A private Autonomous System Number (ASN) for the Amazon side of a BGP session. + // The range is 64512 to 65534 for 16-bit ASNs and 4200000000 to 4294967294 + // for 32-bit ASNs. + AmazonSideAsn *int64 `type:"long"` + // The ID of the default association route table. AssociationDefaultRouteTableId *string `type:"string"` @@ -129705,6 +131767,12 @@ func (s *ModifyTransitGatewayOptions) SetAddTransitGatewayCidrBlocks(v []*string return s } +// SetAmazonSideAsn sets the AmazonSideAsn field's value. +func (s *ModifyTransitGatewayOptions) SetAmazonSideAsn(v int64) *ModifyTransitGatewayOptions { + s.AmazonSideAsn = &v + return s +} + // SetAssociationDefaultRouteTableId sets the AssociationDefaultRouteTableId field's value. func (s *ModifyTransitGatewayOptions) SetAssociationDefaultRouteTableId(v string) *ModifyTransitGatewayOptions { s.AssociationDefaultRouteTableId = &v @@ -135278,6 +137346,8 @@ func (s *PeeringConnectionOptionsRequest) SetAllowEgressFromLocalVpcToRemoteClas type PeeringTgwInfo struct { _ struct{} `type:"structure"` + CoreNetworkId *string `locationName:"coreNetworkId" type:"string"` + // The ID of the Amazon Web Services account that owns the transit gateway. OwnerId *string `locationName:"ownerId" type:"string"` @@ -135306,6 +137376,12 @@ func (s PeeringTgwInfo) GoString() string { return s.String() } +// SetCoreNetworkId sets the CoreNetworkId field's value. +func (s *PeeringTgwInfo) SetCoreNetworkId(v string) *PeeringTgwInfo { + s.CoreNetworkId = &v + return s +} + // SetOwnerId sets the OwnerId field's value. func (s *PeeringTgwInfo) SetOwnerId(v string) *PeeringTgwInfo { s.OwnerId = &v @@ -156004,9 +158080,14 @@ type TransitGatewayPeeringAttachment struct { // Information about the accepter transit gateway. AccepterTgwInfo *PeeringTgwInfo `locationName:"accepterTgwInfo" type:"structure"` + // The ID of the accepter transit gateway attachment. + AccepterTransitGatewayAttachmentId *string `locationName:"accepterTransitGatewayAttachmentId" type:"string"` + // The time the transit gateway peering attachment was created. CreationTime *time.Time `locationName:"creationTime" type:"timestamp"` + Options *TransitGatewayPeeringAttachmentOptions `locationName:"options" type:"structure"` + // Information about the requester transit gateway. RequesterTgwInfo *PeeringTgwInfo `locationName:"requesterTgwInfo" type:"structure"` @@ -156048,12 +158129,24 @@ func (s *TransitGatewayPeeringAttachment) SetAccepterTgwInfo(v *PeeringTgwInfo) return s } +// SetAccepterTransitGatewayAttachmentId sets the AccepterTransitGatewayAttachmentId field's value. +func (s *TransitGatewayPeeringAttachment) SetAccepterTransitGatewayAttachmentId(v string) *TransitGatewayPeeringAttachment { + s.AccepterTransitGatewayAttachmentId = &v + return s +} + // SetCreationTime sets the CreationTime field's value. func (s *TransitGatewayPeeringAttachment) SetCreationTime(v time.Time) *TransitGatewayPeeringAttachment { s.CreationTime = &v return s } +// SetOptions sets the Options field's value. +func (s *TransitGatewayPeeringAttachment) SetOptions(v *TransitGatewayPeeringAttachmentOptions) *TransitGatewayPeeringAttachment { + s.Options = v + return s +} + // SetRequesterTgwInfo sets the RequesterTgwInfo field's value. func (s *TransitGatewayPeeringAttachment) SetRequesterTgwInfo(v *PeeringTgwInfo) *TransitGatewayPeeringAttachment { s.RequesterTgwInfo = v @@ -156084,6 +158177,342 @@ func (s *TransitGatewayPeeringAttachment) SetTransitGatewayAttachmentId(v string return s } +type TransitGatewayPeeringAttachmentOptions struct { + _ struct{} `type:"structure"` + + DynamicRouting *string `locationName:"dynamicRouting" type:"string" enum:"DynamicRoutingValue"` +} + +// String returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s TransitGatewayPeeringAttachmentOptions) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s TransitGatewayPeeringAttachmentOptions) GoString() string { + return s.String() +} + +// SetDynamicRouting sets the DynamicRouting field's value. +func (s *TransitGatewayPeeringAttachmentOptions) SetDynamicRouting(v string) *TransitGatewayPeeringAttachmentOptions { + s.DynamicRouting = &v + return s +} + +// Describes a rule associated with a transit gateway policy. +type TransitGatewayPolicyRule struct { + _ struct{} `type:"structure"` + + // The destination CIDR block for the transit gateway policy rule. + DestinationCidrBlock *string `locationName:"destinationCidrBlock" type:"string"` + + // The port range for the transit gateway policy rule. Currently this is set + // to * (all). + DestinationPortRange *string `locationName:"destinationPortRange" type:"string"` + + // The meta data tags used for the transit gateway policy rule. + MetaData *TransitGatewayPolicyRuleMetaData `locationName:"metaData" type:"structure"` + + // The protocol used by the transit gateway policy rule. + Protocol *string `locationName:"protocol" type:"string"` + + // The source CIDR block for the transit gateway policy rule. + SourceCidrBlock *string `locationName:"sourceCidrBlock" type:"string"` + + // The port range for the transit gateway policy rule. Currently this is set + // to * (all). + SourcePortRange *string `locationName:"sourcePortRange" type:"string"` +} + +// String returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s TransitGatewayPolicyRule) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s TransitGatewayPolicyRule) GoString() string { + return s.String() +} + +// SetDestinationCidrBlock sets the DestinationCidrBlock field's value. +func (s *TransitGatewayPolicyRule) SetDestinationCidrBlock(v string) *TransitGatewayPolicyRule { + s.DestinationCidrBlock = &v + return s +} + +// SetDestinationPortRange sets the DestinationPortRange field's value. +func (s *TransitGatewayPolicyRule) SetDestinationPortRange(v string) *TransitGatewayPolicyRule { + s.DestinationPortRange = &v + return s +} + +// SetMetaData sets the MetaData field's value. +func (s *TransitGatewayPolicyRule) SetMetaData(v *TransitGatewayPolicyRuleMetaData) *TransitGatewayPolicyRule { + s.MetaData = v + return s +} + +// SetProtocol sets the Protocol field's value. +func (s *TransitGatewayPolicyRule) SetProtocol(v string) *TransitGatewayPolicyRule { + s.Protocol = &v + return s +} + +// SetSourceCidrBlock sets the SourceCidrBlock field's value. +func (s *TransitGatewayPolicyRule) SetSourceCidrBlock(v string) *TransitGatewayPolicyRule { + s.SourceCidrBlock = &v + return s +} + +// SetSourcePortRange sets the SourcePortRange field's value. +func (s *TransitGatewayPolicyRule) SetSourcePortRange(v string) *TransitGatewayPolicyRule { + s.SourcePortRange = &v + return s +} + +// Describes the meta data tags associated with a transit gateway policy rule. +type TransitGatewayPolicyRuleMetaData struct { + _ struct{} `type:"structure"` + + // The key name for the transit gateway policy rule meta data tag. + MetaDataKey *string `locationName:"metaDataKey" type:"string"` + + // The value of the key for the transit gateway policy rule meta data tag. + MetaDataValue *string `locationName:"metaDataValue" type:"string"` +} + +// String returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s TransitGatewayPolicyRuleMetaData) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s TransitGatewayPolicyRuleMetaData) GoString() string { + return s.String() +} + +// SetMetaDataKey sets the MetaDataKey field's value. +func (s *TransitGatewayPolicyRuleMetaData) SetMetaDataKey(v string) *TransitGatewayPolicyRuleMetaData { + s.MetaDataKey = &v + return s +} + +// SetMetaDataValue sets the MetaDataValue field's value. +func (s *TransitGatewayPolicyRuleMetaData) SetMetaDataValue(v string) *TransitGatewayPolicyRuleMetaData { + s.MetaDataValue = &v + return s +} + +// Describes a transit gateway policy table. +type TransitGatewayPolicyTable struct { + _ struct{} `type:"structure"` + + // The timestamp when the transit gateway policy table was created. + CreationTime *time.Time `locationName:"creationTime" type:"timestamp"` + + // The state of the transit gateway policy table + State *string `locationName:"state" type:"string" enum:"TransitGatewayPolicyTableState"` + + // he key-value pairs associated with the transit gateway policy table. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + + // The ID of the transit gateway. + TransitGatewayId *string `locationName:"transitGatewayId" type:"string"` + + // The ID of the transit gateway policy table. + TransitGatewayPolicyTableId *string `locationName:"transitGatewayPolicyTableId" type:"string"` +} + +// String returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s TransitGatewayPolicyTable) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s TransitGatewayPolicyTable) GoString() string { + return s.String() +} + +// SetCreationTime sets the CreationTime field's value. +func (s *TransitGatewayPolicyTable) SetCreationTime(v time.Time) *TransitGatewayPolicyTable { + s.CreationTime = &v + return s +} + +// SetState sets the State field's value. +func (s *TransitGatewayPolicyTable) SetState(v string) *TransitGatewayPolicyTable { + s.State = &v + return s +} + +// SetTags sets the Tags field's value. +func (s *TransitGatewayPolicyTable) SetTags(v []*Tag) *TransitGatewayPolicyTable { + s.Tags = v + return s +} + +// SetTransitGatewayId sets the TransitGatewayId field's value. +func (s *TransitGatewayPolicyTable) SetTransitGatewayId(v string) *TransitGatewayPolicyTable { + s.TransitGatewayId = &v + return s +} + +// SetTransitGatewayPolicyTableId sets the TransitGatewayPolicyTableId field's value. +func (s *TransitGatewayPolicyTable) SetTransitGatewayPolicyTableId(v string) *TransitGatewayPolicyTable { + s.TransitGatewayPolicyTableId = &v + return s +} + +// Describes a transit gateway policy table association. +type TransitGatewayPolicyTableAssociation struct { + _ struct{} `type:"structure"` + + // The resource ID of the transit gateway attachment. + ResourceId *string `locationName:"resourceId" type:"string"` + + // The resource type for the transit gateway policy table association. + ResourceType *string `locationName:"resourceType" type:"string" enum:"TransitGatewayAttachmentResourceType"` + + // The state of the transit gateway policy table association. + State *string `locationName:"state" type:"string" enum:"TransitGatewayAssociationState"` + + // The ID of the transit gateway attachment. + TransitGatewayAttachmentId *string `locationName:"transitGatewayAttachmentId" type:"string"` + + // The ID of the transit gateway policy table. + TransitGatewayPolicyTableId *string `locationName:"transitGatewayPolicyTableId" type:"string"` +} + +// String returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s TransitGatewayPolicyTableAssociation) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s TransitGatewayPolicyTableAssociation) GoString() string { + return s.String() +} + +// SetResourceId sets the ResourceId field's value. +func (s *TransitGatewayPolicyTableAssociation) SetResourceId(v string) *TransitGatewayPolicyTableAssociation { + s.ResourceId = &v + return s +} + +// SetResourceType sets the ResourceType field's value. +func (s *TransitGatewayPolicyTableAssociation) SetResourceType(v string) *TransitGatewayPolicyTableAssociation { + s.ResourceType = &v + return s +} + +// SetState sets the State field's value. +func (s *TransitGatewayPolicyTableAssociation) SetState(v string) *TransitGatewayPolicyTableAssociation { + s.State = &v + return s +} + +// SetTransitGatewayAttachmentId sets the TransitGatewayAttachmentId field's value. +func (s *TransitGatewayPolicyTableAssociation) SetTransitGatewayAttachmentId(v string) *TransitGatewayPolicyTableAssociation { + s.TransitGatewayAttachmentId = &v + return s +} + +// SetTransitGatewayPolicyTableId sets the TransitGatewayPolicyTableId field's value. +func (s *TransitGatewayPolicyTableAssociation) SetTransitGatewayPolicyTableId(v string) *TransitGatewayPolicyTableAssociation { + s.TransitGatewayPolicyTableId = &v + return s +} + +// Describes a transit gateway policy table entry +type TransitGatewayPolicyTableEntry struct { + _ struct{} `type:"structure"` + + // The policy rule associated with the transit gateway policy table. + PolicyRule *TransitGatewayPolicyRule `locationName:"policyRule" type:"structure"` + + // The rule number for the transit gateway policy table entry. + PolicyRuleNumber *string `locationName:"policyRuleNumber" type:"string"` + + // The ID of the target route table. + TargetRouteTableId *string `locationName:"targetRouteTableId" type:"string"` +} + +// String returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s TransitGatewayPolicyTableEntry) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s TransitGatewayPolicyTableEntry) GoString() string { + return s.String() +} + +// SetPolicyRule sets the PolicyRule field's value. +func (s *TransitGatewayPolicyTableEntry) SetPolicyRule(v *TransitGatewayPolicyRule) *TransitGatewayPolicyTableEntry { + s.PolicyRule = v + return s +} + +// SetPolicyRuleNumber sets the PolicyRuleNumber field's value. +func (s *TransitGatewayPolicyTableEntry) SetPolicyRuleNumber(v string) *TransitGatewayPolicyTableEntry { + s.PolicyRuleNumber = &v + return s +} + +// SetTargetRouteTableId sets the TargetRouteTableId field's value. +func (s *TransitGatewayPolicyTableEntry) SetTargetRouteTableId(v string) *TransitGatewayPolicyTableEntry { + s.TargetRouteTableId = &v + return s +} + // Describes a transit gateway prefix list attachment. type TransitGatewayPrefixListAttachment struct { _ struct{} `type:"structure"` @@ -156227,6 +158656,9 @@ type TransitGatewayPropagation struct { // The ID of the attachment. TransitGatewayAttachmentId *string `locationName:"transitGatewayAttachmentId" type:"string"` + // The ID of the transit gateway route table announcement. + TransitGatewayRouteTableAnnouncementId *string `locationName:"transitGatewayRouteTableAnnouncementId" type:"string"` + // The ID of the transit gateway route table. TransitGatewayRouteTableId *string `locationName:"transitGatewayRouteTableId" type:"string"` } @@ -156273,6 +158705,12 @@ func (s *TransitGatewayPropagation) SetTransitGatewayAttachmentId(v string) *Tra return s } +// SetTransitGatewayRouteTableAnnouncementId sets the TransitGatewayRouteTableAnnouncementId field's value. +func (s *TransitGatewayPropagation) SetTransitGatewayRouteTableAnnouncementId(v string) *TransitGatewayPropagation { + s.TransitGatewayRouteTableAnnouncementId = &v + return s +} + // SetTransitGatewayRouteTableId sets the TransitGatewayRouteTableId field's value. func (s *TransitGatewayPropagation) SetTransitGatewayRouteTableId(v string) *TransitGatewayPropagation { s.TransitGatewayRouteTableId = &v @@ -156397,6 +158835,8 @@ type TransitGatewayRoute struct { // The attachments. TransitGatewayAttachments []*TransitGatewayRouteAttachment `locationName:"transitGatewayAttachments" locationNameList:"item" type:"list"` + TransitGatewayRouteTableAnnouncementId *string `locationName:"transitGatewayRouteTableAnnouncementId" type:"string"` + // The route type. Type *string `locationName:"type" type:"string" enum:"TransitGatewayRouteType"` } @@ -156443,6 +158883,12 @@ func (s *TransitGatewayRoute) SetTransitGatewayAttachments(v []*TransitGatewayRo return s } +// SetTransitGatewayRouteTableAnnouncementId sets the TransitGatewayRouteTableAnnouncementId field's value. +func (s *TransitGatewayRoute) SetTransitGatewayRouteTableAnnouncementId(v string) *TransitGatewayRoute { + s.TransitGatewayRouteTableAnnouncementId = &v + return s +} + // SetType sets the Type field's value. func (s *TransitGatewayRoute) SetType(v string) *TransitGatewayRoute { s.Type = &v @@ -156587,6 +159033,126 @@ func (s *TransitGatewayRouteTable) SetTransitGatewayRouteTableId(v string) *Tran return s } +// Describes a transit gateway route table announcement. +type TransitGatewayRouteTableAnnouncement struct { + _ struct{} `type:"structure"` + + // The direction for the route table announcement. + AnnouncementDirection *string `locationName:"announcementDirection" type:"string" enum:"TransitGatewayRouteTableAnnouncementDirection"` + + CoreNetworkId *string `locationName:"coreNetworkId" type:"string"` + + // The timestamp when the transit gateway route table announcement was created. + CreationTime *time.Time `locationName:"creationTime" type:"timestamp"` + + PeerCoreNetworkId *string `locationName:"peerCoreNetworkId" type:"string"` + + // The ID of the peer transit gateway. + PeerTransitGatewayId *string `locationName:"peerTransitGatewayId" type:"string"` + + // The ID of the peering attachment. + PeeringAttachmentId *string `locationName:"peeringAttachmentId" type:"string"` + + // The state of the transit gateway announcement. + State *string `locationName:"state" type:"string" enum:"TransitGatewayRouteTableAnnouncementState"` + + // The key-value pairs associated with the route table announcement. + Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"` + + // The ID of the transit gateway. + TransitGatewayId *string `locationName:"transitGatewayId" type:"string"` + + // The ID of the transit gateway route table announcement. + TransitGatewayRouteTableAnnouncementId *string `locationName:"transitGatewayRouteTableAnnouncementId" type:"string"` + + // The ID of the transit gateway route table. + TransitGatewayRouteTableId *string `locationName:"transitGatewayRouteTableId" type:"string"` +} + +// String returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s TransitGatewayRouteTableAnnouncement) String() string { + return awsutil.Prettify(s) +} + +// GoString returns the string representation. +// +// API parameter values that are decorated as "sensitive" in the API will not +// be included in the string output. The member name will be present, but the +// value will be replaced with "sensitive". +func (s TransitGatewayRouteTableAnnouncement) GoString() string { + return s.String() +} + +// SetAnnouncementDirection sets the AnnouncementDirection field's value. +func (s *TransitGatewayRouteTableAnnouncement) SetAnnouncementDirection(v string) *TransitGatewayRouteTableAnnouncement { + s.AnnouncementDirection = &v + return s +} + +// SetCoreNetworkId sets the CoreNetworkId field's value. +func (s *TransitGatewayRouteTableAnnouncement) SetCoreNetworkId(v string) *TransitGatewayRouteTableAnnouncement { + s.CoreNetworkId = &v + return s +} + +// SetCreationTime sets the CreationTime field's value. +func (s *TransitGatewayRouteTableAnnouncement) SetCreationTime(v time.Time) *TransitGatewayRouteTableAnnouncement { + s.CreationTime = &v + return s +} + +// SetPeerCoreNetworkId sets the PeerCoreNetworkId field's value. +func (s *TransitGatewayRouteTableAnnouncement) SetPeerCoreNetworkId(v string) *TransitGatewayRouteTableAnnouncement { + s.PeerCoreNetworkId = &v + return s +} + +// SetPeerTransitGatewayId sets the PeerTransitGatewayId field's value. +func (s *TransitGatewayRouteTableAnnouncement) SetPeerTransitGatewayId(v string) *TransitGatewayRouteTableAnnouncement { + s.PeerTransitGatewayId = &v + return s +} + +// SetPeeringAttachmentId sets the PeeringAttachmentId field's value. +func (s *TransitGatewayRouteTableAnnouncement) SetPeeringAttachmentId(v string) *TransitGatewayRouteTableAnnouncement { + s.PeeringAttachmentId = &v + return s +} + +// SetState sets the State field's value. +func (s *TransitGatewayRouteTableAnnouncement) SetState(v string) *TransitGatewayRouteTableAnnouncement { + s.State = &v + return s +} + +// SetTags sets the Tags field's value. +func (s *TransitGatewayRouteTableAnnouncement) SetTags(v []*Tag) *TransitGatewayRouteTableAnnouncement { + s.Tags = v + return s +} + +// SetTransitGatewayId sets the TransitGatewayId field's value. +func (s *TransitGatewayRouteTableAnnouncement) SetTransitGatewayId(v string) *TransitGatewayRouteTableAnnouncement { + s.TransitGatewayId = &v + return s +} + +// SetTransitGatewayRouteTableAnnouncementId sets the TransitGatewayRouteTableAnnouncementId field's value. +func (s *TransitGatewayRouteTableAnnouncement) SetTransitGatewayRouteTableAnnouncementId(v string) *TransitGatewayRouteTableAnnouncement { + s.TransitGatewayRouteTableAnnouncementId = &v + return s +} + +// SetTransitGatewayRouteTableId sets the TransitGatewayRouteTableId field's value. +func (s *TransitGatewayRouteTableAnnouncement) SetTransitGatewayRouteTableId(v string) *TransitGatewayRouteTableAnnouncement { + s.TransitGatewayRouteTableId = &v + return s +} + // Describes an association between a route table and a resource attachment. type TransitGatewayRouteTableAssociation struct { _ struct{} `type:"structure"` @@ -156661,6 +159227,9 @@ type TransitGatewayRouteTablePropagation struct { // The ID of the attachment. TransitGatewayAttachmentId *string `locationName:"transitGatewayAttachmentId" type:"string"` + + // The ID of the transit gateway route table announcement. + TransitGatewayRouteTableAnnouncementId *string `locationName:"transitGatewayRouteTableAnnouncementId" type:"string"` } // String returns the string representation. @@ -156705,6 +159274,12 @@ func (s *TransitGatewayRouteTablePropagation) SetTransitGatewayAttachmentId(v st return s } +// SetTransitGatewayRouteTableAnnouncementId sets the TransitGatewayRouteTableAnnouncementId field's value. +func (s *TransitGatewayRouteTablePropagation) SetTransitGatewayRouteTableAnnouncementId(v string) *TransitGatewayRouteTablePropagation { + s.TransitGatewayRouteTableAnnouncementId = &v + return s +} + // Describes a route in a transit gateway route table. type TransitGatewayRouteTableRoute struct { _ struct{} `type:"structure"` @@ -162625,6 +165200,22 @@ func DomainType_Values() []string { } } +const ( + // DynamicRoutingValueEnable is a DynamicRoutingValue enum value + DynamicRoutingValueEnable = "enable" + + // DynamicRoutingValueDisable is a DynamicRoutingValue enum value + DynamicRoutingValueDisable = "disable" +) + +// DynamicRoutingValue_Values returns all elements of the DynamicRoutingValue enum +func DynamicRoutingValue_Values() []string { + return []string{ + DynamicRoutingValueEnable, + DynamicRoutingValueDisable, + } +} + const ( // EbsEncryptionSupportUnsupported is a EbsEncryptionSupport enum value EbsEncryptionSupportUnsupported = "unsupported" @@ -167775,9 +170366,15 @@ const ( // ResourceTypeTransitGatewayMulticastDomain is a ResourceType enum value ResourceTypeTransitGatewayMulticastDomain = "transit-gateway-multicast-domain" + // ResourceTypeTransitGatewayPolicyTable is a ResourceType enum value + ResourceTypeTransitGatewayPolicyTable = "transit-gateway-policy-table" + // ResourceTypeTransitGatewayRouteTable is a ResourceType enum value ResourceTypeTransitGatewayRouteTable = "transit-gateway-route-table" + // ResourceTypeTransitGatewayRouteTableAnnouncement is a ResourceType enum value + ResourceTypeTransitGatewayRouteTableAnnouncement = "transit-gateway-route-table-announcement" + // ResourceTypeVolume is a ResourceType enum value ResourceTypeVolume = "volume" @@ -167865,7 +170462,9 @@ func ResourceType_Values() []string { ResourceTypeTransitGatewayAttachment, ResourceTypeTransitGatewayConnectPeer, ResourceTypeTransitGatewayMulticastDomain, + ResourceTypeTransitGatewayPolicyTable, ResourceTypeTransitGatewayRouteTable, + ResourceTypeTransitGatewayRouteTableAnnouncement, ResourceTypeVolume, ResourceTypeVpc, ResourceTypeVpcEndpoint, @@ -168905,6 +171504,30 @@ func TransitGatewayMulticastDomainState_Values() []string { } } +const ( + // TransitGatewayPolicyTableStatePending is a TransitGatewayPolicyTableState enum value + TransitGatewayPolicyTableStatePending = "pending" + + // TransitGatewayPolicyTableStateAvailable is a TransitGatewayPolicyTableState enum value + TransitGatewayPolicyTableStateAvailable = "available" + + // TransitGatewayPolicyTableStateDeleting is a TransitGatewayPolicyTableState enum value + TransitGatewayPolicyTableStateDeleting = "deleting" + + // TransitGatewayPolicyTableStateDeleted is a TransitGatewayPolicyTableState enum value + TransitGatewayPolicyTableStateDeleted = "deleted" +) + +// TransitGatewayPolicyTableState_Values returns all elements of the TransitGatewayPolicyTableState enum +func TransitGatewayPolicyTableState_Values() []string { + return []string{ + TransitGatewayPolicyTableStatePending, + TransitGatewayPolicyTableStateAvailable, + TransitGatewayPolicyTableStateDeleting, + TransitGatewayPolicyTableStateDeleted, + } +} + const ( // TransitGatewayPrefixListReferenceStatePending is a TransitGatewayPrefixListReferenceState enum value TransitGatewayPrefixListReferenceStatePending = "pending" @@ -168981,6 +171604,54 @@ func TransitGatewayRouteState_Values() []string { } } +const ( + // TransitGatewayRouteTableAnnouncementDirectionOutgoing is a TransitGatewayRouteTableAnnouncementDirection enum value + TransitGatewayRouteTableAnnouncementDirectionOutgoing = "outgoing" + + // TransitGatewayRouteTableAnnouncementDirectionIncoming is a TransitGatewayRouteTableAnnouncementDirection enum value + TransitGatewayRouteTableAnnouncementDirectionIncoming = "incoming" +) + +// TransitGatewayRouteTableAnnouncementDirection_Values returns all elements of the TransitGatewayRouteTableAnnouncementDirection enum +func TransitGatewayRouteTableAnnouncementDirection_Values() []string { + return []string{ + TransitGatewayRouteTableAnnouncementDirectionOutgoing, + TransitGatewayRouteTableAnnouncementDirectionIncoming, + } +} + +const ( + // TransitGatewayRouteTableAnnouncementStateAvailable is a TransitGatewayRouteTableAnnouncementState enum value + TransitGatewayRouteTableAnnouncementStateAvailable = "available" + + // TransitGatewayRouteTableAnnouncementStatePending is a TransitGatewayRouteTableAnnouncementState enum value + TransitGatewayRouteTableAnnouncementStatePending = "pending" + + // TransitGatewayRouteTableAnnouncementStateFailing is a TransitGatewayRouteTableAnnouncementState enum value + TransitGatewayRouteTableAnnouncementStateFailing = "failing" + + // TransitGatewayRouteTableAnnouncementStateFailed is a TransitGatewayRouteTableAnnouncementState enum value + TransitGatewayRouteTableAnnouncementStateFailed = "failed" + + // TransitGatewayRouteTableAnnouncementStateDeleting is a TransitGatewayRouteTableAnnouncementState enum value + TransitGatewayRouteTableAnnouncementStateDeleting = "deleting" + + // TransitGatewayRouteTableAnnouncementStateDeleted is a TransitGatewayRouteTableAnnouncementState enum value + TransitGatewayRouteTableAnnouncementStateDeleted = "deleted" +) + +// TransitGatewayRouteTableAnnouncementState_Values returns all elements of the TransitGatewayRouteTableAnnouncementState enum +func TransitGatewayRouteTableAnnouncementState_Values() []string { + return []string{ + TransitGatewayRouteTableAnnouncementStateAvailable, + TransitGatewayRouteTableAnnouncementStatePending, + TransitGatewayRouteTableAnnouncementStateFailing, + TransitGatewayRouteTableAnnouncementStateFailed, + TransitGatewayRouteTableAnnouncementStateDeleting, + TransitGatewayRouteTableAnnouncementStateDeleted, + } +} + const ( // TransitGatewayRouteTableStatePending is a TransitGatewayRouteTableState enum value TransitGatewayRouteTableStatePending = "pending" diff --git a/service/ec2/ec2iface/interface.go b/service/ec2/ec2iface/interface.go index 69be9e6726..d180f4c791 100644 --- a/service/ec2/ec2iface/interface.go +++ b/service/ec2/ec2iface/interface.go @@ -148,6 +148,10 @@ type EC2API interface { AssociateTransitGatewayMulticastDomainWithContext(aws.Context, *ec2.AssociateTransitGatewayMulticastDomainInput, ...request.Option) (*ec2.AssociateTransitGatewayMulticastDomainOutput, error) AssociateTransitGatewayMulticastDomainRequest(*ec2.AssociateTransitGatewayMulticastDomainInput) (*request.Request, *ec2.AssociateTransitGatewayMulticastDomainOutput) + AssociateTransitGatewayPolicyTable(*ec2.AssociateTransitGatewayPolicyTableInput) (*ec2.AssociateTransitGatewayPolicyTableOutput, error) + AssociateTransitGatewayPolicyTableWithContext(aws.Context, *ec2.AssociateTransitGatewayPolicyTableInput, ...request.Option) (*ec2.AssociateTransitGatewayPolicyTableOutput, error) + AssociateTransitGatewayPolicyTableRequest(*ec2.AssociateTransitGatewayPolicyTableInput) (*request.Request, *ec2.AssociateTransitGatewayPolicyTableOutput) + AssociateTransitGatewayRouteTable(*ec2.AssociateTransitGatewayRouteTableInput) (*ec2.AssociateTransitGatewayRouteTableOutput, error) AssociateTransitGatewayRouteTableWithContext(aws.Context, *ec2.AssociateTransitGatewayRouteTableInput, ...request.Option) (*ec2.AssociateTransitGatewayRouteTableOutput, error) AssociateTransitGatewayRouteTableRequest(*ec2.AssociateTransitGatewayRouteTableInput) (*request.Request, *ec2.AssociateTransitGatewayRouteTableOutput) @@ -476,6 +480,10 @@ type EC2API interface { CreateTransitGatewayPeeringAttachmentWithContext(aws.Context, *ec2.CreateTransitGatewayPeeringAttachmentInput, ...request.Option) (*ec2.CreateTransitGatewayPeeringAttachmentOutput, error) CreateTransitGatewayPeeringAttachmentRequest(*ec2.CreateTransitGatewayPeeringAttachmentInput) (*request.Request, *ec2.CreateTransitGatewayPeeringAttachmentOutput) + CreateTransitGatewayPolicyTable(*ec2.CreateTransitGatewayPolicyTableInput) (*ec2.CreateTransitGatewayPolicyTableOutput, error) + CreateTransitGatewayPolicyTableWithContext(aws.Context, *ec2.CreateTransitGatewayPolicyTableInput, ...request.Option) (*ec2.CreateTransitGatewayPolicyTableOutput, error) + CreateTransitGatewayPolicyTableRequest(*ec2.CreateTransitGatewayPolicyTableInput) (*request.Request, *ec2.CreateTransitGatewayPolicyTableOutput) + CreateTransitGatewayPrefixListReference(*ec2.CreateTransitGatewayPrefixListReferenceInput) (*ec2.CreateTransitGatewayPrefixListReferenceOutput, error) CreateTransitGatewayPrefixListReferenceWithContext(aws.Context, *ec2.CreateTransitGatewayPrefixListReferenceInput, ...request.Option) (*ec2.CreateTransitGatewayPrefixListReferenceOutput, error) CreateTransitGatewayPrefixListReferenceRequest(*ec2.CreateTransitGatewayPrefixListReferenceInput) (*request.Request, *ec2.CreateTransitGatewayPrefixListReferenceOutput) @@ -488,6 +496,10 @@ type EC2API interface { CreateTransitGatewayRouteTableWithContext(aws.Context, *ec2.CreateTransitGatewayRouteTableInput, ...request.Option) (*ec2.CreateTransitGatewayRouteTableOutput, error) CreateTransitGatewayRouteTableRequest(*ec2.CreateTransitGatewayRouteTableInput) (*request.Request, *ec2.CreateTransitGatewayRouteTableOutput) + CreateTransitGatewayRouteTableAnnouncement(*ec2.CreateTransitGatewayRouteTableAnnouncementInput) (*ec2.CreateTransitGatewayRouteTableAnnouncementOutput, error) + CreateTransitGatewayRouteTableAnnouncementWithContext(aws.Context, *ec2.CreateTransitGatewayRouteTableAnnouncementInput, ...request.Option) (*ec2.CreateTransitGatewayRouteTableAnnouncementOutput, error) + CreateTransitGatewayRouteTableAnnouncementRequest(*ec2.CreateTransitGatewayRouteTableAnnouncementInput) (*request.Request, *ec2.CreateTransitGatewayRouteTableAnnouncementOutput) + CreateTransitGatewayVpcAttachment(*ec2.CreateTransitGatewayVpcAttachmentInput) (*ec2.CreateTransitGatewayVpcAttachmentOutput, error) CreateTransitGatewayVpcAttachmentWithContext(aws.Context, *ec2.CreateTransitGatewayVpcAttachmentInput, ...request.Option) (*ec2.CreateTransitGatewayVpcAttachmentOutput, error) CreateTransitGatewayVpcAttachmentRequest(*ec2.CreateTransitGatewayVpcAttachmentInput) (*request.Request, *ec2.CreateTransitGatewayVpcAttachmentOutput) @@ -724,6 +736,10 @@ type EC2API interface { DeleteTransitGatewayPeeringAttachmentWithContext(aws.Context, *ec2.DeleteTransitGatewayPeeringAttachmentInput, ...request.Option) (*ec2.DeleteTransitGatewayPeeringAttachmentOutput, error) DeleteTransitGatewayPeeringAttachmentRequest(*ec2.DeleteTransitGatewayPeeringAttachmentInput) (*request.Request, *ec2.DeleteTransitGatewayPeeringAttachmentOutput) + DeleteTransitGatewayPolicyTable(*ec2.DeleteTransitGatewayPolicyTableInput) (*ec2.DeleteTransitGatewayPolicyTableOutput, error) + DeleteTransitGatewayPolicyTableWithContext(aws.Context, *ec2.DeleteTransitGatewayPolicyTableInput, ...request.Option) (*ec2.DeleteTransitGatewayPolicyTableOutput, error) + DeleteTransitGatewayPolicyTableRequest(*ec2.DeleteTransitGatewayPolicyTableInput) (*request.Request, *ec2.DeleteTransitGatewayPolicyTableOutput) + DeleteTransitGatewayPrefixListReference(*ec2.DeleteTransitGatewayPrefixListReferenceInput) (*ec2.DeleteTransitGatewayPrefixListReferenceOutput, error) DeleteTransitGatewayPrefixListReferenceWithContext(aws.Context, *ec2.DeleteTransitGatewayPrefixListReferenceInput, ...request.Option) (*ec2.DeleteTransitGatewayPrefixListReferenceOutput, error) DeleteTransitGatewayPrefixListReferenceRequest(*ec2.DeleteTransitGatewayPrefixListReferenceInput) (*request.Request, *ec2.DeleteTransitGatewayPrefixListReferenceOutput) @@ -736,6 +752,10 @@ type EC2API interface { DeleteTransitGatewayRouteTableWithContext(aws.Context, *ec2.DeleteTransitGatewayRouteTableInput, ...request.Option) (*ec2.DeleteTransitGatewayRouteTableOutput, error) DeleteTransitGatewayRouteTableRequest(*ec2.DeleteTransitGatewayRouteTableInput) (*request.Request, *ec2.DeleteTransitGatewayRouteTableOutput) + DeleteTransitGatewayRouteTableAnnouncement(*ec2.DeleteTransitGatewayRouteTableAnnouncementInput) (*ec2.DeleteTransitGatewayRouteTableAnnouncementOutput, error) + DeleteTransitGatewayRouteTableAnnouncementWithContext(aws.Context, *ec2.DeleteTransitGatewayRouteTableAnnouncementInput, ...request.Option) (*ec2.DeleteTransitGatewayRouteTableAnnouncementOutput, error) + DeleteTransitGatewayRouteTableAnnouncementRequest(*ec2.DeleteTransitGatewayRouteTableAnnouncementInput) (*request.Request, *ec2.DeleteTransitGatewayRouteTableAnnouncementOutput) + DeleteTransitGatewayVpcAttachment(*ec2.DeleteTransitGatewayVpcAttachmentInput) (*ec2.DeleteTransitGatewayVpcAttachmentOutput, error) DeleteTransitGatewayVpcAttachmentWithContext(aws.Context, *ec2.DeleteTransitGatewayVpcAttachmentInput, ...request.Option) (*ec2.DeleteTransitGatewayVpcAttachmentOutput, error) DeleteTransitGatewayVpcAttachmentRequest(*ec2.DeleteTransitGatewayVpcAttachmentInput) (*request.Request, *ec2.DeleteTransitGatewayVpcAttachmentOutput) @@ -1501,6 +1521,20 @@ type EC2API interface { DescribeTransitGatewayPeeringAttachmentsPages(*ec2.DescribeTransitGatewayPeeringAttachmentsInput, func(*ec2.DescribeTransitGatewayPeeringAttachmentsOutput, bool) bool) error DescribeTransitGatewayPeeringAttachmentsPagesWithContext(aws.Context, *ec2.DescribeTransitGatewayPeeringAttachmentsInput, func(*ec2.DescribeTransitGatewayPeeringAttachmentsOutput, bool) bool, ...request.Option) error + DescribeTransitGatewayPolicyTables(*ec2.DescribeTransitGatewayPolicyTablesInput) (*ec2.DescribeTransitGatewayPolicyTablesOutput, error) + DescribeTransitGatewayPolicyTablesWithContext(aws.Context, *ec2.DescribeTransitGatewayPolicyTablesInput, ...request.Option) (*ec2.DescribeTransitGatewayPolicyTablesOutput, error) + DescribeTransitGatewayPolicyTablesRequest(*ec2.DescribeTransitGatewayPolicyTablesInput) (*request.Request, *ec2.DescribeTransitGatewayPolicyTablesOutput) + + DescribeTransitGatewayPolicyTablesPages(*ec2.DescribeTransitGatewayPolicyTablesInput, func(*ec2.DescribeTransitGatewayPolicyTablesOutput, bool) bool) error + DescribeTransitGatewayPolicyTablesPagesWithContext(aws.Context, *ec2.DescribeTransitGatewayPolicyTablesInput, func(*ec2.DescribeTransitGatewayPolicyTablesOutput, bool) bool, ...request.Option) error + + DescribeTransitGatewayRouteTableAnnouncements(*ec2.DescribeTransitGatewayRouteTableAnnouncementsInput) (*ec2.DescribeTransitGatewayRouteTableAnnouncementsOutput, error) + DescribeTransitGatewayRouteTableAnnouncementsWithContext(aws.Context, *ec2.DescribeTransitGatewayRouteTableAnnouncementsInput, ...request.Option) (*ec2.DescribeTransitGatewayRouteTableAnnouncementsOutput, error) + DescribeTransitGatewayRouteTableAnnouncementsRequest(*ec2.DescribeTransitGatewayRouteTableAnnouncementsInput) (*request.Request, *ec2.DescribeTransitGatewayRouteTableAnnouncementsOutput) + + DescribeTransitGatewayRouteTableAnnouncementsPages(*ec2.DescribeTransitGatewayRouteTableAnnouncementsInput, func(*ec2.DescribeTransitGatewayRouteTableAnnouncementsOutput, bool) bool) error + DescribeTransitGatewayRouteTableAnnouncementsPagesWithContext(aws.Context, *ec2.DescribeTransitGatewayRouteTableAnnouncementsInput, func(*ec2.DescribeTransitGatewayRouteTableAnnouncementsOutput, bool) bool, ...request.Option) error + DescribeTransitGatewayRouteTables(*ec2.DescribeTransitGatewayRouteTablesInput) (*ec2.DescribeTransitGatewayRouteTablesOutput, error) DescribeTransitGatewayRouteTablesWithContext(aws.Context, *ec2.DescribeTransitGatewayRouteTablesInput, ...request.Option) (*ec2.DescribeTransitGatewayRouteTablesOutput, error) DescribeTransitGatewayRouteTablesRequest(*ec2.DescribeTransitGatewayRouteTablesInput) (*request.Request, *ec2.DescribeTransitGatewayRouteTablesOutput) @@ -1722,6 +1756,10 @@ type EC2API interface { DisassociateTransitGatewayMulticastDomainWithContext(aws.Context, *ec2.DisassociateTransitGatewayMulticastDomainInput, ...request.Option) (*ec2.DisassociateTransitGatewayMulticastDomainOutput, error) DisassociateTransitGatewayMulticastDomainRequest(*ec2.DisassociateTransitGatewayMulticastDomainInput) (*request.Request, *ec2.DisassociateTransitGatewayMulticastDomainOutput) + DisassociateTransitGatewayPolicyTable(*ec2.DisassociateTransitGatewayPolicyTableInput) (*ec2.DisassociateTransitGatewayPolicyTableOutput, error) + DisassociateTransitGatewayPolicyTableWithContext(aws.Context, *ec2.DisassociateTransitGatewayPolicyTableInput, ...request.Option) (*ec2.DisassociateTransitGatewayPolicyTableOutput, error) + DisassociateTransitGatewayPolicyTableRequest(*ec2.DisassociateTransitGatewayPolicyTableInput) (*request.Request, *ec2.DisassociateTransitGatewayPolicyTableOutput) + DisassociateTransitGatewayRouteTable(*ec2.DisassociateTransitGatewayRouteTableInput) (*ec2.DisassociateTransitGatewayRouteTableOutput, error) DisassociateTransitGatewayRouteTableWithContext(aws.Context, *ec2.DisassociateTransitGatewayRouteTableInput, ...request.Option) (*ec2.DisassociateTransitGatewayRouteTableOutput, error) DisassociateTransitGatewayRouteTableRequest(*ec2.DisassociateTransitGatewayRouteTableInput) (*request.Request, *ec2.DisassociateTransitGatewayRouteTableOutput) @@ -1950,6 +1988,17 @@ type EC2API interface { GetTransitGatewayMulticastDomainAssociationsPages(*ec2.GetTransitGatewayMulticastDomainAssociationsInput, func(*ec2.GetTransitGatewayMulticastDomainAssociationsOutput, bool) bool) error GetTransitGatewayMulticastDomainAssociationsPagesWithContext(aws.Context, *ec2.GetTransitGatewayMulticastDomainAssociationsInput, func(*ec2.GetTransitGatewayMulticastDomainAssociationsOutput, bool) bool, ...request.Option) error + GetTransitGatewayPolicyTableAssociations(*ec2.GetTransitGatewayPolicyTableAssociationsInput) (*ec2.GetTransitGatewayPolicyTableAssociationsOutput, error) + GetTransitGatewayPolicyTableAssociationsWithContext(aws.Context, *ec2.GetTransitGatewayPolicyTableAssociationsInput, ...request.Option) (*ec2.GetTransitGatewayPolicyTableAssociationsOutput, error) + GetTransitGatewayPolicyTableAssociationsRequest(*ec2.GetTransitGatewayPolicyTableAssociationsInput) (*request.Request, *ec2.GetTransitGatewayPolicyTableAssociationsOutput) + + GetTransitGatewayPolicyTableAssociationsPages(*ec2.GetTransitGatewayPolicyTableAssociationsInput, func(*ec2.GetTransitGatewayPolicyTableAssociationsOutput, bool) bool) error + GetTransitGatewayPolicyTableAssociationsPagesWithContext(aws.Context, *ec2.GetTransitGatewayPolicyTableAssociationsInput, func(*ec2.GetTransitGatewayPolicyTableAssociationsOutput, bool) bool, ...request.Option) error + + GetTransitGatewayPolicyTableEntries(*ec2.GetTransitGatewayPolicyTableEntriesInput) (*ec2.GetTransitGatewayPolicyTableEntriesOutput, error) + GetTransitGatewayPolicyTableEntriesWithContext(aws.Context, *ec2.GetTransitGatewayPolicyTableEntriesInput, ...request.Option) (*ec2.GetTransitGatewayPolicyTableEntriesOutput, error) + GetTransitGatewayPolicyTableEntriesRequest(*ec2.GetTransitGatewayPolicyTableEntriesInput) (*request.Request, *ec2.GetTransitGatewayPolicyTableEntriesOutput) + GetTransitGatewayPrefixListReferences(*ec2.GetTransitGatewayPrefixListReferencesInput) (*ec2.GetTransitGatewayPrefixListReferencesOutput, error) GetTransitGatewayPrefixListReferencesWithContext(aws.Context, *ec2.GetTransitGatewayPrefixListReferencesInput, ...request.Option) (*ec2.GetTransitGatewayPrefixListReferencesOutput, error) GetTransitGatewayPrefixListReferencesRequest(*ec2.GetTransitGatewayPrefixListReferencesInput) (*request.Request, *ec2.GetTransitGatewayPrefixListReferencesOutput) diff --git a/service/redshift/api.go b/service/redshift/api.go index f97782486d..c5fa086505 100644 --- a/service/redshift/api.go +++ b/service/redshift/api.go @@ -649,6 +649,9 @@ func (c *Redshift) AuthorizeSnapshotAccessRequest(input *AuthorizeSnapshotAccess // * ErrCodeLimitExceededFault "LimitExceededFault" // The encryption key has exceeded its grant limit in Amazon Web Services KMS. // +// * ErrCodeUnsupportedOperationFault "UnsupportedOperation" +// The requested operation isn't supported. +// // See also, https://docs.aws.amazon.com/goto/WebAPI/redshift-2012-12-01/AuthorizeSnapshotAccess func (c *Redshift) AuthorizeSnapshotAccess(input *AuthorizeSnapshotAccessInput) (*AuthorizeSnapshotAccessOutput, error) { req, out := c.AuthorizeSnapshotAccessRequest(input) @@ -4957,6 +4960,9 @@ func (c *Redshift) DescribeClusterSnapshotsRequest(input *DescribeClusterSnapsho // * ErrCodeInvalidTagFault "InvalidTagFault" // The tag is invalid. // +// * ErrCodeUnsupportedOperationFault "UnsupportedOperation" +// The requested operation isn't supported. +// // See also, https://docs.aws.amazon.com/goto/WebAPI/redshift-2012-12-01/DescribeClusterSnapshots func (c *Redshift) DescribeClusterSnapshots(input *DescribeClusterSnapshotsInput) (*DescribeClusterSnapshotsOutput, error) { req, out := c.DescribeClusterSnapshotsRequest(input) @@ -7272,6 +7278,9 @@ func (c *Redshift) DescribeNodeConfigurationOptionsRequest(input *DescribeNodeCo // The owner of the specified snapshot has not authorized your account to access // the snapshot. // +// * ErrCodeUnsupportedOperationFault "UnsupportedOperation" +// The requested operation isn't supported. +// // See also, https://docs.aws.amazon.com/goto/WebAPI/redshift-2012-12-01/DescribeNodeConfigurationOptions func (c *Redshift) DescribeNodeConfigurationOptions(input *DescribeNodeConfigurationOptionsInput) (*DescribeNodeConfigurationOptionsOutput, error) { req, out := c.DescribeNodeConfigurationOptionsRequest(input) @@ -12775,6 +12784,9 @@ func (c *Redshift) RevokeSnapshotAccessRequest(input *RevokeSnapshotAccessInput) // * ErrCodeClusterSnapshotNotFoundFault "ClusterSnapshotNotFound" // The snapshot identifier does not refer to an existing cluster snapshot. // +// * ErrCodeUnsupportedOperationFault "UnsupportedOperation" +// The requested operation isn't supported. +// // See also, https://docs.aws.amazon.com/goto/WebAPI/redshift-2012-12-01/RevokeSnapshotAccess func (c *Redshift) RevokeSnapshotAccess(input *RevokeSnapshotAccessInput) (*RevokeSnapshotAccessOutput, error) { req, out := c.RevokeSnapshotAccessRequest(input) @@ -13980,15 +13992,16 @@ type AuthorizeSnapshotAccessInput struct { // AccountWithRestoreAccess is a required field AccountWithRestoreAccess *string `type:"string" required:"true"` + // The Amazon Resource Name (ARN) of the snapshot to authorize access to. + SnapshotArn *string `type:"string"` + // The identifier of the cluster the snapshot was created from. This parameter // is required if your IAM user has a policy containing a snapshot resource // element that specifies anything other than * for the cluster name. SnapshotClusterIdentifier *string `type:"string"` // The identifier of the snapshot the account is authorized to restore. - // - // SnapshotIdentifier is a required field - SnapshotIdentifier *string `type:"string" required:"true"` + SnapshotIdentifier *string `type:"string"` } // String returns the string representation. @@ -14015,9 +14028,6 @@ func (s *AuthorizeSnapshotAccessInput) Validate() error { if s.AccountWithRestoreAccess == nil { invalidParams.Add(request.NewErrParamRequired("AccountWithRestoreAccess")) } - if s.SnapshotIdentifier == nil { - invalidParams.Add(request.NewErrParamRequired("SnapshotIdentifier")) - } if invalidParams.Len() > 0 { return invalidParams @@ -14031,6 +14041,12 @@ func (s *AuthorizeSnapshotAccessInput) SetAccountWithRestoreAccess(v string) *Au return s } +// SetSnapshotArn sets the SnapshotArn field's value. +func (s *AuthorizeSnapshotAccessInput) SetSnapshotArn(v string) *AuthorizeSnapshotAccessInput { + s.SnapshotArn = &v + return s +} + // SetSnapshotClusterIdentifier sets the SnapshotClusterIdentifier field's value. func (s *AuthorizeSnapshotAccessInput) SetSnapshotClusterIdentifier(v string) *AuthorizeSnapshotAccessInput { s.SnapshotClusterIdentifier = &v @@ -16282,7 +16298,9 @@ type CreateClusterInput struct { // the cluster when the cluster was created. DefaultIamRoleArn *string `type:"string"` - // The Elastic IP (EIP) address for the cluster. + // The Elastic IP (EIP) address for the cluster. You don't have to specify the + // EIP for a publicly accessible cluster with AvailabilityZoneRelocation turned + // on. // // Constraints: The cluster must be provisioned in EC2-VPC and publicly-accessible // through an Internet gateway. For more information about provisioning clusters @@ -21303,6 +21321,10 @@ type DescribeClusterSnapshotsInput struct { // or do not specify the parameter. OwnerAccount *string `type:"string"` + // The Amazon Resource Name (ARN) of the snapshot associated with the message + // to describe cluster snapshots. + SnapshotArn *string `type:"string"` + // The snapshot identifier of the snapshot about which to return information. SnapshotIdentifier *string `type:"string"` @@ -21412,6 +21434,12 @@ func (s *DescribeClusterSnapshotsInput) SetOwnerAccount(v string) *DescribeClust return s } +// SetSnapshotArn sets the SnapshotArn field's value. +func (s *DescribeClusterSnapshotsInput) SetSnapshotArn(v string) *DescribeClusterSnapshotsInput { + s.SnapshotArn = &v + return s +} + // SetSnapshotIdentifier sets the SnapshotIdentifier field's value. func (s *DescribeClusterSnapshotsInput) SetSnapshotIdentifier(v string) *DescribeClusterSnapshotsInput { s.SnapshotIdentifier = &v @@ -23406,6 +23434,10 @@ type DescribeNodeConfigurationOptionsInput struct { // if you are restoring a snapshot you do not own, optional if you own the snapshot. OwnerAccount *string `type:"string"` + // The Amazon Resource Name (ARN) of the snapshot associated with the message + // to describe node configuration. + SnapshotArn *string `type:"string"` + // The identifier of the snapshot to evaluate for possible node configurations. SnapshotIdentifier *string `type:"string"` } @@ -23477,6 +23509,12 @@ func (s *DescribeNodeConfigurationOptionsInput) SetOwnerAccount(v string) *Descr return s } +// SetSnapshotArn sets the SnapshotArn field's value. +func (s *DescribeNodeConfigurationOptionsInput) SetSnapshotArn(v string) *DescribeNodeConfigurationOptionsInput { + s.SnapshotArn = &v + return s +} + // SetSnapshotIdentifier sets the SnapshotIdentifier field's value. func (s *DescribeNodeConfigurationOptionsInput) SetSnapshotIdentifier(v string) *DescribeNodeConfigurationOptionsInput { s.SnapshotIdentifier = &v @@ -31669,7 +31707,9 @@ type RestoreFromClusterSnapshotInput struct { // a snapshot. DefaultIamRoleArn *string `type:"string"` - // The elastic IP (EIP) address for the cluster. + // The elastic IP (EIP) address for the cluster. You don't have to specify the + // EIP for a publicly accessible cluster with AvailabilityZoneRelocation turned + // on. ElasticIp *string `type:"string"` // Enables support for restoring an unencrypted snapshot to a cluster encrypted @@ -31779,6 +31819,10 @@ type RestoreFromClusterSnapshotInput struct { // The identifier of the target reserved node offering. ReservedNodeId *string `type:"string"` + // The Amazon Resource Name (ARN) of the snapshot associated with the message + // to restore from a cluster. + SnapshotArn *string `type:"string"` + // The name of the cluster the source snapshot was created from. This parameter // is required if your IAM user has a policy containing a snapshot resource // element that specifies anything other than * for the cluster name. @@ -31788,9 +31832,7 @@ type RestoreFromClusterSnapshotInput struct { // isn't case sensitive. // // Example: my-snapshot-id - // - // SnapshotIdentifier is a required field - SnapshotIdentifier *string `type:"string" required:"true"` + SnapshotIdentifier *string `type:"string"` // A unique identifier for the snapshot schedule. SnapshotScheduleIdentifier *string `type:"string"` @@ -31831,9 +31873,6 @@ func (s *RestoreFromClusterSnapshotInput) Validate() error { if s.ClusterIdentifier == nil { invalidParams.Add(request.NewErrParamRequired("ClusterIdentifier")) } - if s.SnapshotIdentifier == nil { - invalidParams.Add(request.NewErrParamRequired("SnapshotIdentifier")) - } if invalidParams.Len() > 0 { return invalidParams @@ -32003,6 +32042,12 @@ func (s *RestoreFromClusterSnapshotInput) SetReservedNodeId(v string) *RestoreFr return s } +// SetSnapshotArn sets the SnapshotArn field's value. +func (s *RestoreFromClusterSnapshotInput) SetSnapshotArn(v string) *RestoreFromClusterSnapshotInput { + s.SnapshotArn = &v + return s +} + // SetSnapshotClusterIdentifier sets the SnapshotClusterIdentifier field's value. func (s *RestoreFromClusterSnapshotInput) SetSnapshotClusterIdentifier(v string) *RestoreFromClusterSnapshotInput { s.SnapshotClusterIdentifier = &v @@ -32791,15 +32836,17 @@ type RevokeSnapshotAccessInput struct { // AccountWithRestoreAccess is a required field AccountWithRestoreAccess *string `type:"string" required:"true"` + // The Amazon Resource Name (ARN) of the snapshot associated with the message + // to revoke access. + SnapshotArn *string `type:"string"` + // The identifier of the cluster the snapshot was created from. This parameter // is required if your IAM user has a policy containing a snapshot resource // element that specifies anything other than * for the cluster name. SnapshotClusterIdentifier *string `type:"string"` // The identifier of the snapshot that the account can no longer access. - // - // SnapshotIdentifier is a required field - SnapshotIdentifier *string `type:"string" required:"true"` + SnapshotIdentifier *string `type:"string"` } // String returns the string representation. @@ -32826,9 +32873,6 @@ func (s *RevokeSnapshotAccessInput) Validate() error { if s.AccountWithRestoreAccess == nil { invalidParams.Add(request.NewErrParamRequired("AccountWithRestoreAccess")) } - if s.SnapshotIdentifier == nil { - invalidParams.Add(request.NewErrParamRequired("SnapshotIdentifier")) - } if invalidParams.Len() > 0 { return invalidParams @@ -32842,6 +32886,12 @@ func (s *RevokeSnapshotAccessInput) SetAccountWithRestoreAccess(v string) *Revok return s } +// SetSnapshotArn sets the SnapshotArn field's value. +func (s *RevokeSnapshotAccessInput) SetSnapshotArn(v string) *RevokeSnapshotAccessInput { + s.SnapshotArn = &v + return s +} + // SetSnapshotClusterIdentifier sets the SnapshotClusterIdentifier field's value. func (s *RevokeSnapshotAccessInput) SetSnapshotClusterIdentifier(v string) *RevokeSnapshotAccessInput { s.SnapshotClusterIdentifier = &v diff --git a/service/redshiftserverless/doc.go b/service/redshiftserverless/doc.go index e2c4cb2979..0bd41d8931 100644 --- a/service/redshiftserverless/doc.go +++ b/service/redshiftserverless/doc.go @@ -3,12 +3,6 @@ // Package redshiftserverless provides the client and types for making API // requests to Redshift Serverless. // -// This is prerelease documentation for Amazon Redshift Serverless, which is -// in preview release. The documentation and the feature are both subject to -// change. We recommend that you use this feature only in test environments, -// and not in production environments. For preview terms and conditions, see -// Beta Service Participation in Amazon Web Services Service Terms (https://docs.aws.amazon.com/https:/aws.amazon.com/service-terms). -// // This is an interface reference for Amazon Redshift Serverless. It contains // documentation for one of the programming or command line interfaces you can // use to manage Amazon Redshift Serverless.