The performance risk of the Auto Scaling group configuration recommendation.
Performance risk indicates the likelihood of the recommended instance type not meeting the resource needs of your workload. Compute Optimizer calculates an individual performance risk score for each specification of the recommended instance, including CPU, memory, EBS throughput, EBS IOPS, disk throughput, disk IOPS, network throughput, and network PPS. The performance risk of the recommended instance is calculated as the maximum performance risk score across the analyzed resource specifications.
The value ranges from 0 to 5, with 0 meaning that the recommended resource is predicted to always provide enough hardware capability. The higher the performance risk is, the more likely you should validate whether the recommended resource meets the performance requirements of your workload before migrating your resource.
", - "InstanceRecommendationOption$performanceRisk": "The performance risk of the instance recommendation option.
Performance risk indicates the likelihood of the recommended instance type not meeting the resource needs of your workload. Compute Optimizer calculates an individual performance risk score for each specification of the recommended instance, including CPU, memory, EBS throughput, EBS IOPS, disk throughput, disk IOPS, network throughput, and network PPS. The performance risk of the recommended instance is calculated as the maximum performance risk score across the analyzed resource specifications.
The value ranges from 0 to 5, with 0 meaning that the recommended resource is predicted to always provide enough hardware capability. The higher the performance risk is, the more likely you should validate whether the recommendation will meet the performance requirements of your workload before migrating your resource.
The performance risk of the volume recommendation option.
Performance risk is the likelihood of the recommended volume type meeting the performance requirement of your workload.
The value ranges from 0 to 5, with 0 meaning that the recommended resource is predicted to always provide enough hardware capability. The higher the performance risk is, the more likely you should validate whether the recommendation will meet the performance requirements of your workload before migrating your resource.
The performance risk of the Auto Scaling group configuration recommendation.
Performance risk indicates the likelihood of the recommended instance type not meeting the resource needs of your workload. Compute Optimizer calculates an individual performance risk score for each specification of the recommended instance, including CPU, memory, EBS throughput, EBS IOPS, disk throughput, disk IOPS, network throughput, and network PPS. The performance risk of the recommended instance is calculated as the maximum performance risk score across the analyzed resource specifications.
The value ranges from 0 - 4, with 0 meaning that the recommended resource is predicted to always provide enough hardware capability. The higher the performance risk is, the more likely you should validate whether the recommendation will meet the performance requirements of your workload before migrating your resource.
The performance risk of the instance recommendation option.
Performance risk indicates the likelihood of the recommended instance type not meeting the resource needs of your workload. Compute Optimizer calculates an individual performance risk score for each specification of the recommended instance, including CPU, memory, EBS throughput, EBS IOPS, disk throughput, disk IOPS, network throughput, and network PPS. The performance risk of the recommended instance is calculated as the maximum performance risk score across the analyzed resource specifications.
The value ranges from 0 - 4, with 0 meaning that the recommended resource is predicted to always provide enough hardware capability. The higher the performance risk is, the more likely you should validate whether the recommendation will meet the performance requirements of your workload before migrating your resource.
The performance risk of the volume recommendation option.
Performance risk is the likelihood of the recommended volume type meeting the performance requirement of your workload.
The value ranges from 0 - 4, with 0 meaning that the recommended resource is predicted to always provide enough hardware capability. The higher the performance risk is, the more likely you should validate whether the recommendation will meet the performance requirements of your workload before migrating your resource.
Links an EC2-Classic instance to a ClassicLink-enabled VPC through one or more of the VPC's security groups. You cannot link an EC2-Classic instance to more than one VPC at a time. You can only link an instance that's in the running state. An instance is automatically unlinked from a VPC when it's stopped - you can link it to the VPC again when you restart it.
After you've linked an instance, you cannot change the VPC security groups that are associated with it. To change the security groups, you must first unlink the instance, and then link it again.
Linking your instance to a VPC is sometimes referred to as attaching your instance.
", "AttachInternetGateway": "Attaches an internet gateway or a virtual private gateway to a VPC, enabling connectivity between the internet and the VPC. For more information about your VPC and internet gateway, see the Amazon Virtual Private Cloud User Guide.
", "AttachNetworkInterface": "Attaches a network interface to an instance.
", - "AttachVolume": "Attaches an EBS volume to a running or stopped instance and exposes it to the instance with the specified device name.
Encrypted EBS volumes must be attached to instances that support Amazon EBS encryption. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
After you attach an EBS volume, you must make it available. For more information, see Making an EBS volume available for use.
If a volume has an AWS Marketplace product code:
The volume can be attached only to a stopped instance.
AWS Marketplace product codes are copied from the volume to the instance.
You must be subscribed to the product.
The instance type and operating system of the instance must support the product. For example, you can't detach a volume from a Windows instance and attach it to a Linux instance.
For more information, see Attaching Amazon EBS volumes in the Amazon Elastic Compute Cloud User Guide.
", + "AttachVolume": "Attaches an EBS volume to a running or stopped instance and exposes it to the instance with the specified device name.
Encrypted EBS volumes must be attached to instances that support Amazon EBS encryption. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
After you attach an EBS volume, you must make it available. For more information, see Make an EBS volume available for use.
If a volume has an Marketplace product code:
The volume can be attached only to a stopped instance.
Marketplace product codes are copied from the volume to the instance.
You must be subscribed to the product.
The instance type and operating system of the instance must support the product. For example, you can't detach a volume from a Windows instance and attach it to a Linux instance.
For more information, see Attach an Amazon EBS volume to an instance in the Amazon Elastic Compute Cloud User Guide.
", "AttachVpnGateway": "Attaches a virtual private gateway to a VPC. You can attach one virtual private gateway to one VPC at a time.
For more information, see AWS Site-to-Site VPN in the AWS Site-to-Site VPN User Guide.
", "AuthorizeClientVpnIngress": "Adds an ingress authorization rule to a Client VPN endpoint. Ingress authorization rules act as firewall rules that grant access to networks. You must configure ingress authorization rules to enable clients to access resources in AWS or on-premises networks.
", "AuthorizeSecurityGroupEgress": "[VPC only] Adds the specified outbound (egress) rules to a security group for use with a VPC.
An outbound rule permits instances to send traffic to the specified IPv4 or IPv6 CIDR address ranges, or to the instances that are associated with the specified destination security groups.
You specify a protocol for each rule (for example, TCP). For the TCP and UDP protocols, you must also specify the destination port or port range. For the ICMP protocol, you must also specify the ICMP type and code. You can use -1 for the type or code to mean all types or all codes.
Rule changes are propagated to affected instances as quickly as possible. However, a small delay might occur.
For information about VPC security group quotas, see Amazon VPC quotas.
", @@ -46,7 +46,7 @@ "ConfirmProductInstance": "Determines whether a product code is associated with an instance. This action can only be used by the owner of the product code. It is useful when a product code owner must verify whether another user's instance is eligible for support.
", "CopyFpgaImage": "Copies the specified Amazon FPGA Image (AFI) to the current Region.
", "CopyImage": "Initiates the copy of an AMI. You can copy an AMI from one Region to another, or from a Region to an AWS Outpost. You can't copy an AMI from an Outpost to a Region, from one Outpost to another, or within the same Outpost. To copy an AMI to another partition, see CreateStoreImageTask.
To copy an AMI from one Region to another, specify the source Region using the SourceRegion parameter, and specify the destination Region using its endpoint. Copies of encrypted backing snapshots for the AMI are encrypted. Copies of unencrypted backing snapshots remain unencrypted, unless you set Encrypted during the copy operation. You cannot create an unencrypted copy of an encrypted backing snapshot.
To copy an AMI from a Region to an Outpost, specify the source Region using the SourceRegion parameter, and specify the ARN of the destination Outpost using DestinationOutpostArn. Backing snapshots copied to an Outpost are encrypted by default using the default encryption key for the Region, or a different key that you specify in the request using KmsKeyId. Outposts do not support unencrypted snapshots. For more information, Amazon EBS local snapshots on Outposts in the Amazon Elastic Compute Cloud User Guide.
For more information about the prerequisites and limits when copying an AMI, see Copying an AMI in the Amazon Elastic Compute Cloud User Guide.
", - "CopySnapshot": "Copies a point-in-time snapshot of an EBS volume and stores it in Amazon S3. You can copy a snapshot within the same Region, from one Region to another, or from a Region to an Outpost. You can't copy a snapshot from an Outpost to a Region, from one Outpost to another, or within the same Outpost.
You can use the snapshot to create EBS volumes or Amazon Machine Images (AMIs).
When copying snapshots to a Region, copies of encrypted EBS snapshots remain encrypted. Copies of unencrypted snapshots remain unencrypted, unless you enable encryption for the snapshot copy operation. By default, encrypted snapshot copies use the default AWS Key Management Service (AWS KMS) customer master key (CMK); however, you can specify a different CMK. To copy an encrypted snapshot that has been shared from another account, you must have permissions for the CMK used to encrypt the snapshot.
Snapshots copied to an Outpost are encrypted by default using the default encryption key for the Region, or a different key that you specify in the request using KmsKeyId. Outposts do not support unencrypted snapshots. For more information, Amazon EBS local snapshots on Outposts in the Amazon Elastic Compute Cloud User Guide.
Snapshots created by copying another snapshot have an arbitrary volume ID that should not be used for any purpose.
For more information, see Copying an Amazon EBS snapshot in the Amazon Elastic Compute Cloud User Guide.
", + "CopySnapshot": "Copies a point-in-time snapshot of an EBS volume and stores it in Amazon S3. You can copy a snapshot within the same Region, from one Region to another, or from a Region to an Outpost. You can't copy a snapshot from an Outpost to a Region, from one Outpost to another, or within the same Outpost.
You can use the snapshot to create EBS volumes or Amazon Machine Images (AMIs).
When copying snapshots to a Region, copies of encrypted EBS snapshots remain encrypted. Copies of unencrypted snapshots remain unencrypted, unless you enable encryption for the snapshot copy operation. By default, encrypted snapshot copies use the default Key Management Service (KMS) KMS key; however, you can specify a different KMS key. To copy an encrypted snapshot that has been shared from another account, you must have permissions for the KMS key used to encrypt the snapshot.
Snapshots copied to an Outpost are encrypted by default using the default encryption key for the Region, or a different key that you specify in the request using KmsKeyId. Outposts do not support unencrypted snapshots. For more information, Amazon EBS local snapshots on Outposts in the Amazon Elastic Compute Cloud User Guide.
Snapshots created by copying another snapshot have an arbitrary volume ID that should not be used for any purpose.
For more information, see Copy an Amazon EBS snapshot in the Amazon Elastic Compute Cloud User Guide.
", "CreateCapacityReservation": "Creates a new Capacity Reservation with the specified attributes.
Capacity Reservations enable you to reserve capacity for your Amazon EC2 instances in a specific Availability Zone for any duration. This gives you the flexibility to selectively add capacity reservations and still get the Regional RI discounts for that usage. By creating Capacity Reservations, you ensure that you always have access to Amazon EC2 capacity when you need it, for as long as you need it. For more information, see Capacity Reservations in the Amazon EC2 User Guide.
Your request to create a Capacity Reservation could fail if Amazon EC2 does not have sufficient capacity to fulfill the request. If your request fails due to Amazon EC2 capacity constraints, either try again at a later time, try in a different Availability Zone, or request a smaller capacity reservation. If your application is flexible across instance types and sizes, try to create a Capacity Reservation with different instance attributes.
Your request could also fail if the requested quantity exceeds your On-Demand Instance limit for the selected instance type. If your request fails due to limit constraints, increase your On-Demand Instance limit for the required instance type and try again. For more information about increasing your instance limits, see Amazon EC2 Service Quotas in the Amazon EC2 User Guide.
", "CreateCarrierGateway": "Creates a carrier gateway. For more information about carrier gateways, see Carrier gateways in the AWS Wavelength Developer Guide.
", "CreateClientVpnEndpoint": "Creates a Client VPN endpoint. A Client VPN endpoint is the resource you create and configure to enable and manage client VPN sessions. It is the destination endpoint at which all client VPN sessions are terminated.
", @@ -76,13 +76,13 @@ "CreateNetworkInterface": "Creates a network interface in the specified subnet.
For more information about network interfaces, see Elastic Network Interfaces in the Amazon Virtual Private Cloud User Guide.
", "CreateNetworkInterfacePermission": "Grants an Amazon Web Services-authorized account permission to attach the specified network interface to an instance in their account.
You can grant permission to a single account only, and only one account at a time.
", "CreatePlacementGroup": "Creates a placement group in which to launch instances. The strategy of the placement group determines how the instances are organized within the group.
A cluster placement group is a logical grouping of instances within a single Availability Zone that benefit from low network latency, high network throughput. A spread placement group places instances on distinct hardware. A partition placement group places groups of instances in different partitions, where instances in one partition do not share the same hardware with instances in another partition.
For more information, see Placement groups in the Amazon EC2 User Guide.
", - "CreateReplaceRootVolumeTask": "Creates a root volume replacement task for an Amazon EC2 instance. The root volume can either be restored to its initial launch state, or it can be restored using a specific snapshot.
For more information, see Replace a root volume in the Amazon Elastic Compute Cloud User Guide.
", + "CreateReplaceRootVolumeTask": "Creates a root volume replacement task for an Amazon EC2 instance. The root volume can either be restored to its initial launch state, or it can be restored using a specific snapshot.
For more information, see Replace a root volume in the Amazon Elastic Compute Cloud User Guide.
", "CreateReservedInstancesListing": "Creates a listing for Amazon EC2 Standard Reserved Instances to be sold in the Reserved Instance Marketplace. You can submit one Standard Reserved Instance listing at a time. To get a list of your Standard Reserved Instances, you can use the DescribeReservedInstances operation.
Only Standard Reserved Instances can be sold in the Reserved Instance Marketplace. Convertible Reserved Instances cannot be sold.
The Reserved Instance Marketplace matches sellers who want to resell Standard Reserved Instance capacity that they no longer need with buyers who want to purchase additional capacity. Reserved Instances bought and sold through the Reserved Instance Marketplace work like any other Reserved Instances.
To sell your Standard Reserved Instances, you must first register as a seller in the Reserved Instance Marketplace. After completing the registration process, you can create a Reserved Instance Marketplace listing of some or all of your Standard Reserved Instances, and specify the upfront price to receive for them. Your Standard Reserved Instance listings then become available for purchase. To view the details of your Standard Reserved Instance listing, you can use the DescribeReservedInstancesListings operation.
For more information, see Reserved Instance Marketplace in the Amazon EC2 User Guide.
", "CreateRestoreImageTask": "Starts a task that restores an AMI from an S3 object that was previously created by using CreateStoreImageTask.
To use this API, you must have the required permissions. For more information, see Permissions for storing and restoring AMIs using S3 in the Amazon Elastic Compute Cloud User Guide.
For more information, see Store and restore an AMI using S3 in the Amazon Elastic Compute Cloud User Guide.
", "CreateRoute": "Creates a route in a route table within a VPC.
You must specify one of the following targets: internet gateway or virtual private gateway, NAT instance, NAT gateway, VPC peering connection, network interface, egress-only internet gateway, or transit gateway.
When determining how to route traffic, we use the route with the most specific match. For example, traffic is destined for the IPv4 address 192.0.2.3, and the route table includes the following two IPv4 routes:
192.0.2.0/24 (goes to some target A)
192.0.2.0/28 (goes to some target B)
Both routes apply to the traffic destined for 192.0.2.3. However, the second route in the list covers a smaller number of IP addresses and is therefore more specific, so we use that route to determine where to target the traffic.
For more information about route tables, see Route Tables in the Amazon Virtual Private Cloud User Guide.
", "CreateRouteTable": "Creates a route table for the specified VPC. After you create a route table, you can add routes and associate the table with a subnet.
For more information, see Route Tables in the Amazon Virtual Private Cloud User Guide.
", "CreateSecurityGroup": "Creates a security group.
A security group acts as a virtual firewall for your instance to control inbound and outbound traffic. For more information, see Amazon EC2 Security Groups in the Amazon Elastic Compute Cloud User Guide and Security Groups for Your VPC in the Amazon Virtual Private Cloud User Guide.
When you create a security group, you specify a friendly name of your choice. You can have a security group for use in EC2-Classic with the same name as a security group for use in a VPC. However, you can't have two security groups for use in EC2-Classic with the same name or two security groups for use in a VPC with the same name.
You have a default security group for use in EC2-Classic and a default security group for use in your VPC. If you don't specify a security group when you launch an instance, the instance is launched into the appropriate default security group. A default security group includes a default rule that grants instances unrestricted network access to each other.
You can add or remove rules from your security groups using AuthorizeSecurityGroupIngress, AuthorizeSecurityGroupEgress, RevokeSecurityGroupIngress, and RevokeSecurityGroupEgress.
For more information about VPC security group limits, see Amazon VPC Limits.
", - "CreateSnapshot": "Creates a snapshot of an EBS volume and stores it in Amazon S3. You can use snapshots for backups, to make copies of EBS volumes, and to save data before shutting down an instance.
You can create snapshots of volumes in a Region and volumes on an Outpost. If you create a snapshot of a volume in a Region, the snapshot must be stored in the same Region as the volume. If you create a snapshot of a volume on an Outpost, the snapshot can be stored on the same Outpost as the volume, or in the Region for that Outpost.
When a snapshot is created, any AWS Marketplace product codes that are associated with the source volume are propagated to the snapshot.
You can take a snapshot of an attached volume that is in use. However, snapshots only capture data that has been written to your EBS volume at the time the snapshot command is issued; this might exclude any data that has been cached by any applications or the operating system. If you can pause any file systems on the volume long enough to take a snapshot, your snapshot should be complete. However, if you cannot pause all file writes to the volume, you should unmount the volume from within the instance, issue the snapshot command, and then remount the volume to ensure a consistent and complete snapshot. You may remount and use your volume while the snapshot status is pending.
To create a snapshot for EBS volumes that serve as root devices, you should stop the instance before taking the snapshot.
Snapshots that are taken from encrypted volumes are automatically encrypted. Volumes that are created from encrypted snapshots are also automatically encrypted. Your encrypted volumes and any associated snapshots always remain protected.
You can tag your snapshots during creation. For more information, see Tagging your Amazon EC2 resources in the Amazon Elastic Compute Cloud User Guide.
For more information, see Amazon Elastic Block Store and Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
", + "CreateSnapshot": "Creates a snapshot of an EBS volume and stores it in Amazon S3. You can use snapshots for backups, to make copies of EBS volumes, and to save data before shutting down an instance.
You can create snapshots of volumes in a Region and volumes on an Outpost. If you create a snapshot of a volume in a Region, the snapshot must be stored in the same Region as the volume. If you create a snapshot of a volume on an Outpost, the snapshot can be stored on the same Outpost as the volume, or in the Region for that Outpost.
When a snapshot is created, any Marketplace product codes that are associated with the source volume are propagated to the snapshot.
You can take a snapshot of an attached volume that is in use. However, snapshots only capture data that has been written to your Amazon EBS volume at the time the snapshot command is issued; this might exclude any data that has been cached by any applications or the operating system. If you can pause any file systems on the volume long enough to take a snapshot, your snapshot should be complete. However, if you cannot pause all file writes to the volume, you should unmount the volume from within the instance, issue the snapshot command, and then remount the volume to ensure a consistent and complete snapshot. You may remount and use your volume while the snapshot status is pending.
To create a snapshot for Amazon EBS volumes that serve as root devices, you should stop the instance before taking the snapshot.
Snapshots that are taken from encrypted volumes are automatically encrypted. Volumes that are created from encrypted snapshots are also automatically encrypted. Your encrypted volumes and any associated snapshots always remain protected.
You can tag your snapshots during creation. For more information, see Tag your Amazon EC2 resources in the Amazon Elastic Compute Cloud User Guide.
For more information, see Amazon Elastic Block Store and Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
", "CreateSnapshots": "Creates crash-consistent snapshots of multiple EBS volumes and stores the data in S3. Volumes are chosen by specifying an instance. Any attached volumes will produce one snapshot each that is crash-consistent across the instance. Boot volumes can be excluded by changing the parameters.
You can create multi-volume snapshots of instances in a Region and instances on an Outpost. If you create snapshots from an instance in a Region, the snapshots must be stored in the same Region as the instance. If you create snapshots from an instance on an Outpost, the snapshots can be stored on the same Outpost as the instance, or in the Region for that Outpost.
", "CreateSpotDatafeedSubscription": "Creates a data feed for Spot Instances, enabling you to view Spot Instance usage logs. You can create one data feed per account. For more information, see Spot Instance data feed in the Amazon EC2 User Guide for Linux Instances.
", "CreateStoreImageTask": "Stores an AMI as a single object in an S3 bucket.
To use this API, you must have the required permissions. For more information, see Permissions for storing and restoring AMIs using S3 in the Amazon Elastic Compute Cloud User Guide.
For more information, see Store and restore an AMI using S3 in the Amazon Elastic Compute Cloud User Guide.
", @@ -101,7 +101,7 @@ "CreateTransitGatewayRoute": "Creates a static route for the specified transit gateway route table.
", "CreateTransitGatewayRouteTable": "Creates a route table for the specified transit gateway.
", "CreateTransitGatewayVpcAttachment": "Attaches the specified VPC to the specified transit gateway.
If you attach a VPC with a CIDR range that overlaps the CIDR range of a VPC that is already attached, the new VPC CIDR range is not propagated to the default propagation route table.
To send VPC traffic to an attached transit gateway, add a route to the VPC route table using CreateRoute.
", - "CreateVolume": "Creates an EBS volume that can be attached to an instance in the same Availability Zone.
You can create a new empty volume or restore a volume from an EBS snapshot. Any AWS Marketplace product codes from the snapshot are propagated to the volume.
You can create encrypted volumes. Encrypted volumes must be attached to instances that support Amazon EBS encryption. Volumes that are created from encrypted snapshots are also automatically encrypted. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
You can tag your volumes during creation. For more information, see Tagging your Amazon EC2 resources in the Amazon Elastic Compute Cloud User Guide.
For more information, see Creating an Amazon EBS volume in the Amazon Elastic Compute Cloud User Guide.
", + "CreateVolume": "Creates an EBS volume that can be attached to an instance in the same Availability Zone.
You can create a new empty volume or restore a volume from an EBS snapshot. Any Marketplace product codes from the snapshot are propagated to the volume.
You can create encrypted volumes. Encrypted volumes must be attached to instances that support Amazon EBS encryption. Volumes that are created from encrypted snapshots are also automatically encrypted. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
You can tag your volumes during creation. For more information, see Tag your Amazon EC2 resources in the Amazon Elastic Compute Cloud User Guide.
For more information, see Create an Amazon EBS volume in the Amazon Elastic Compute Cloud User Guide.
", "CreateVpc": "Creates a VPC with the specified IPv4 CIDR block. The smallest VPC you can create uses a /28 netmask (16 IPv4 addresses), and the largest uses a /16 netmask (65,536 IPv4 addresses). For more information about how large to make your VPC, see Your VPC and Subnets in the Amazon Virtual Private Cloud User Guide.
You can optionally request an IPv6 CIDR block for the VPC. You can request an Amazon-provided IPv6 CIDR block from Amazon's pool of IPv6 addresses, or an IPv6 CIDR block from an IPv6 address pool that you provisioned through bring your own IP addresses (BYOIP).
By default, each instance you launch in the VPC has the default DHCP options, which include only a default DNS server that we provide (AmazonProvidedDNS). For more information, see DHCP Options Sets in the Amazon Virtual Private Cloud User Guide.
You can specify the instance tenancy value for the VPC when you create it. You can't change this value for the VPC after you create it. For more information, see Dedicated Instances in the Amazon Elastic Compute Cloud User Guide.
", "CreateVpcEndpoint": "Creates a VPC endpoint for a specified service. An endpoint enables you to create a private connection between your VPC and the service. The service may be provided by AWS, an AWS Marketplace Partner, or another AWS account. For more information, see VPC Endpoints in the Amazon Virtual Private Cloud User Guide.
A gateway endpoint serves as a target for a route in your route table for traffic destined for the AWS service. You can specify an endpoint policy to attach to the endpoint, which will control access to the service from your VPC. You can also specify the VPC route tables that use the endpoint.
An interface endpoint is a network interface in your subnet that serves as an endpoint for communicating with the specified service. You can specify the subnets in which to create an endpoint, and the security groups to associate with the endpoint network interface.
A GatewayLoadBalancer endpoint is a network interface in your subnet that serves an endpoint for communicating with a Gateway Load Balancer that you've configured as a VPC endpoint service.
Use DescribeVpcEndpointServices to get a list of supported services.
", "CreateVpcEndpointConnectionNotification": "Creates a connection notification for a specified VPC endpoint or VPC endpoint service. A connection notification notifies you of specific endpoint events. You must create an SNS topic to receive notifications. For more information, see Create a Topic in the Amazon Simple Notification Service Developer Guide.
You can create a connection notification for interface endpoints only.
", @@ -139,7 +139,7 @@ "DeleteRoute": "Deletes the specified route from the specified route table.
", "DeleteRouteTable": "Deletes the specified route table. You must disassociate the route table from any subnets before you can delete it. You can't delete the main route table.
", "DeleteSecurityGroup": "Deletes a security group.
If you attempt to delete a security group that is associated with an instance, or is referenced by another security group, the operation fails with InvalidGroup.InUse in EC2-Classic or DependencyViolation in EC2-VPC.
Deletes the specified snapshot.
When you make periodic snapshots of a volume, the snapshots are incremental, and only the blocks on the device that have changed since your last snapshot are saved in the new snapshot. When you delete a snapshot, only the data not needed for any other snapshot is removed. So regardless of which prior snapshots have been deleted, all active snapshots will have access to all the information needed to restore the volume.
You cannot delete a snapshot of the root device of an EBS volume used by a registered AMI. You must first de-register the AMI before you can delete the snapshot.
For more information, see Deleting an Amazon EBS snapshot in the Amazon Elastic Compute Cloud User Guide.
", + "DeleteSnapshot": "Deletes the specified snapshot.
When you make periodic snapshots of a volume, the snapshots are incremental, and only the blocks on the device that have changed since your last snapshot are saved in the new snapshot. When you delete a snapshot, only the data not needed for any other snapshot is removed. So regardless of which prior snapshots have been deleted, all active snapshots will have access to all the information needed to restore the volume.
You cannot delete a snapshot of the root device of an EBS volume used by a registered AMI. You must first de-register the AMI before you can delete the snapshot.
For more information, see Delete an Amazon EBS snapshot in the Amazon Elastic Compute Cloud User Guide.
", "DeleteSpotDatafeedSubscription": "Deletes the data feed for Spot Instances.
", "DeleteSubnet": "Deletes the specified subnet. You must terminate all running instances in the subnet before you can delete the subnet.
", "DeleteTags": "Deletes the specified set of tags from the specified set of resources.
To list the current tags, use DescribeTags. For more information about tags, see Tagging Your Resources in the Amazon Elastic Compute Cloud User Guide.
", @@ -156,7 +156,7 @@ "DeleteTransitGatewayRoute": "Deletes the specified route from the specified transit gateway route table.
", "DeleteTransitGatewayRouteTable": "Deletes the specified transit gateway route table. You must disassociate the route table from any transit gateway route tables before you can delete it.
", "DeleteTransitGatewayVpcAttachment": "Deletes the specified VPC attachment.
", - "DeleteVolume": "Deletes the specified EBS volume. The volume must be in the available state (not attached to an instance).
The volume can remain in the deleting state for several minutes.
For more information, see Deleting an Amazon EBS volume in the Amazon Elastic Compute Cloud User Guide.
", + "DeleteVolume": "Deletes the specified EBS volume. The volume must be in the available state (not attached to an instance).
The volume can remain in the deleting state for several minutes.
For more information, see Delete an Amazon EBS volume in the Amazon Elastic Compute Cloud User Guide.
", "DeleteVpc": "Deletes the specified VPC. You must detach or delete all gateways and resources that are associated with the VPC before you can delete it. For example, you must terminate all instances running in the VPC, delete all security groups associated with the VPC (except the default one), delete all route tables associated with the VPC (except the default one), and so on.
", "DeleteVpcEndpointConnectionNotifications": "Deletes one or more VPC endpoint connection notifications.
", "DeleteVpcEndpointServiceConfigurations": "Deletes one or more VPC endpoint service configurations in your account. Before you delete the endpoint service configuration, you must reject any Available or PendingAcceptance interface endpoint connections that are attached to the service.
Describes the ID format settings for the root user and all IAM roles and IAM users that have explicitly specified a longer ID (17-character ID) preference.
By default, all IAM roles and IAM users default to the same ID settings as the root user, unless they explicitly override the settings. This request is useful for identifying those IAM users and IAM roles that have overridden the default ID settings.
The following resource types support longer IDs: bundle | conversion-task | customer-gateway | dhcp-options | elastic-ip-allocation | elastic-ip-association | export-task | flow-log | image | import-task | instance | internet-gateway | network-acl | network-acl-association | network-interface | network-interface-attachment | prefix-list | reservation | route-table | route-table-association | security-group | snapshot | subnet | subnet-cidr-block-association | volume | vpc | vpc-cidr-block-association | vpc-endpoint | vpc-peering-connection | vpn-connection | vpn-gateway.
Describes the specified IPv4 address pools.
", "DescribeRegions": "Describes the Regions that are enabled for your account, or all Regions.
For a list of the Regions supported by Amazon EC2, see Regions and Endpoints.
For information about enabling and disabling Regions for your account, see Managing AWS Regions in the AWS General Reference.
", - "DescribeReplaceRootVolumeTasks": "Describes a root volume replacement task. For more information, see Replace a root volume in the Amazon Elastic Compute Cloud User Guide.
", + "DescribeReplaceRootVolumeTasks": "Describes a root volume replacement task. For more information, see Replace a root volume in the Amazon Elastic Compute Cloud User Guide.
", "DescribeReservedInstances": "Describes one or more of the Reserved Instances that you purchased.
For more information about Reserved Instances, see Reserved Instances in the Amazon EC2 User Guide.
", "DescribeReservedInstancesListings": "Describes your account's Reserved Instance listings in the Reserved Instance Marketplace.
The Reserved Instance Marketplace matches sellers who want to resell Reserved Instance capacity that they no longer need with buyers who want to purchase additional capacity. Reserved Instances bought and sold through the Reserved Instance Marketplace work like any other Reserved Instances.
As a seller, you choose to list some or all of your Reserved Instances, and you specify the upfront price to receive for them. Your Reserved Instances are then listed in the Reserved Instance Marketplace and are available for purchase.
As a buyer, you specify the configuration of the Reserved Instance to purchase, and the Marketplace matches what you're searching for with what's available. The Marketplace first sells the lowest priced Reserved Instances to you, and continues to sell available Reserved Instance listings to you until your demand is met. You are charged based on the total price of all of the listings that you purchase.
For more information, see Reserved Instance Marketplace in the Amazon EC2 User Guide.
", "DescribeReservedInstancesModifications": "Describes the modifications made to your Reserved Instances. If no parameter is specified, information about all your Reserved Instances modification requests is returned. If a modification ID is specified, only information about the specific modification is returned.
For more information, see Modifying Reserved Instances in the Amazon EC2 User Guide.
", @@ -255,7 +255,7 @@ "DescribeSecurityGroupRules": "Describes one or more of your security group rules.
", "DescribeSecurityGroups": "Describes the specified security groups or all of your security groups.
A security group is for use with instances either in the EC2-Classic platform or in a specific VPC. For more information, see Amazon EC2 Security Groups in the Amazon Elastic Compute Cloud User Guide and Security Groups for Your VPC in the Amazon Virtual Private Cloud User Guide.
", "DescribeSnapshotAttribute": "Describes the specified attribute of the specified snapshot. You can specify only one attribute at a time.
For more information about EBS snapshots, see Amazon EBS snapshots in the Amazon Elastic Compute Cloud User Guide.
", - "DescribeSnapshots": "Describes the specified EBS snapshots available to you or all of the EBS snapshots available to you.
The snapshots available to you include public snapshots, private snapshots that you own, and private snapshots owned by other AWS accounts for which you have explicit create volume permissions.
The create volume permissions fall into the following categories:
public: The owner of the snapshot granted create volume permissions for the snapshot to the all group. All AWS accounts have create volume permissions for these snapshots.
explicit: The owner of the snapshot granted create volume permissions to a specific AWS account.
implicit: An AWS account has implicit create volume permissions for all snapshots it owns.
The list of snapshots returned can be filtered by specifying snapshot IDs, snapshot owners, or AWS accounts with create volume permissions. If no options are specified, Amazon EC2 returns all snapshots for which you have create volume permissions.
If you specify one or more snapshot IDs, only snapshots that have the specified IDs are returned. If you specify an invalid snapshot ID, an error is returned. If you specify a snapshot ID for which you do not have access, it is not included in the returned results.
If you specify one or more snapshot owners using the OwnerIds option, only snapshots from the specified owners and for which you have access are returned. The results can include the AWS account IDs of the specified owners, amazon for snapshots owned by Amazon, or self for snapshots that you own.
If you specify a list of restorable users, only snapshots with create snapshot permissions for those users are returned. You can specify AWS account IDs (if you own the snapshots), self for snapshots for which you own or have explicit permissions, or all for public snapshots.
If you are describing a long list of snapshots, we recommend that you paginate the output to make the list more manageable. The MaxResults parameter sets the maximum number of results returned in a single page. If the list of results exceeds your MaxResults value, then that number of results is returned along with a NextToken value that can be passed to a subsequent DescribeSnapshots request to retrieve the remaining results.
To get the state of fast snapshot restores for a snapshot, use DescribeFastSnapshotRestores.
For more information about EBS snapshots, see Amazon EBS snapshots in the Amazon Elastic Compute Cloud User Guide.
", + "DescribeSnapshots": "Describes the specified EBS snapshots available to you or all of the EBS snapshots available to you.
The snapshots available to you include public snapshots, private snapshots that you own, and private snapshots owned by other accounts for which you have explicit create volume permissions.
The create volume permissions fall into the following categories:
public: The owner of the snapshot granted create volume permissions for the snapshot to the all group. All accounts have create volume permissions for these snapshots.
explicit: The owner of the snapshot granted create volume permissions to a specific account.
implicit: An account has implicit create volume permissions for all snapshots it owns.
The list of snapshots returned can be filtered by specifying snapshot IDs, snapshot owners, or accounts with create volume permissions. If no options are specified, Amazon EC2 returns all snapshots for which you have create volume permissions.
If you specify one or more snapshot IDs, only snapshots that have the specified IDs are returned. If you specify an invalid snapshot ID, an error is returned. If you specify a snapshot ID for which you do not have access, it is not included in the returned results.
If you specify one or more snapshot owners using the OwnerIds option, only snapshots from the specified owners and for which you have access are returned. The results can include the account IDs of the specified owners, amazon for snapshots owned by Amazon, or self for snapshots that you own.
If you specify a list of restorable users, only snapshots with create snapshot permissions for those users are returned. You can specify account IDs (if you own the snapshots), self for snapshots for which you own or have explicit permissions, or all for public snapshots.
If you are describing a long list of snapshots, we recommend that you paginate the output to make the list more manageable. The MaxResults parameter sets the maximum number of results returned in a single page. If the list of results exceeds your MaxResults value, then that number of results is returned along with a NextToken value that can be passed to a subsequent DescribeSnapshots request to retrieve the remaining results.
To get the state of fast snapshot restores for a snapshot, use DescribeFastSnapshotRestores.
For more information about EBS snapshots, see Amazon EBS snapshots in the Amazon Elastic Compute Cloud User Guide.
", "DescribeSpotDatafeedSubscription": "Describes the data feed for Spot Instances. For more information, see Spot Instance data feed in the Amazon EC2 User Guide for Linux Instances.
", "DescribeSpotFleetInstances": "Describes the running instances for the specified Spot Fleet.
", "DescribeSpotFleetRequestHistory": "Describes the events for the specified Spot Fleet request during the specified time.
Spot Fleet events are delayed by up to 30 seconds before they can be described. This ensures that you can query by the last evaluated time and not miss a recorded event. Spot Fleet events are available for 48 hours.
", @@ -279,9 +279,9 @@ "DescribeTransitGateways": "Describes one or more transit gateways. By default, all transit gateways are described. Alternatively, you can filter the results.
", "DescribeTrunkInterfaceAssociations": "Describes one or more network interface trunk associations.
", "DescribeVolumeAttribute": "Describes the specified attribute of the specified volume. You can specify only one attribute at a time.
For more information about EBS volumes, see Amazon EBS volumes in the Amazon Elastic Compute Cloud User Guide.
", - "DescribeVolumeStatus": "Describes the status of the specified volumes. Volume status provides the result of the checks performed on your volumes to determine events that can impair the performance of your volumes. The performance of a volume can be affected if an issue occurs on the volume's underlying host. If the volume's underlying host experiences a power outage or system issue, after the system is restored, there could be data inconsistencies on the volume. Volume events notify you if this occurs. Volume actions notify you if any action needs to be taken in response to the event.
The DescribeVolumeStatus operation provides the following information about the specified volumes:
Status: Reflects the current status of the volume. The possible values are ok, impaired , warning, or insufficient-data. If all checks pass, the overall status of the volume is ok. If the check fails, the overall status is impaired. If the status is insufficient-data, then the checks might still be taking place on your volume at the time. We recommend that you retry the request. For more information about volume status, see Monitoring the status of your volumes in the Amazon Elastic Compute Cloud User Guide.
Events: Reflect the cause of a volume status and might require you to take action. For example, if your volume returns an impaired status, then the volume event might be potential-data-inconsistency. This means that your volume has been affected by an issue with the underlying host, has all I/O operations disabled, and might have inconsistent data.
Actions: Reflect the actions you might have to take in response to an event. For example, if the status of the volume is impaired and the volume event shows potential-data-inconsistency, then the action shows enable-volume-io. This means that you may want to enable the I/O operations for the volume by calling the EnableVolumeIO action and then check the volume for data consistency.
Volume status is based on the volume status checks, and does not reflect the volume state. Therefore, volume status does not indicate volumes in the error state (for example, when a volume is incapable of accepting I/O.)
Describes the status of the specified volumes. Volume status provides the result of the checks performed on your volumes to determine events that can impair the performance of your volumes. The performance of a volume can be affected if an issue occurs on the volume's underlying host. If the volume's underlying host experiences a power outage or system issue, after the system is restored, there could be data inconsistencies on the volume. Volume events notify you if this occurs. Volume actions notify you if any action needs to be taken in response to the event.
The DescribeVolumeStatus operation provides the following information about the specified volumes:
Status: Reflects the current status of the volume. The possible values are ok, impaired , warning, or insufficient-data. If all checks pass, the overall status of the volume is ok. If the check fails, the overall status is impaired. If the status is insufficient-data, then the checks might still be taking place on your volume at the time. We recommend that you retry the request. For more information about volume status, see Monitor the status of your volumes in the Amazon Elastic Compute Cloud User Guide.
Events: Reflect the cause of a volume status and might require you to take action. For example, if your volume returns an impaired status, then the volume event might be potential-data-inconsistency. This means that your volume has been affected by an issue with the underlying host, has all I/O operations disabled, and might have inconsistent data.
Actions: Reflect the actions you might have to take in response to an event. For example, if the status of the volume is impaired and the volume event shows potential-data-inconsistency, then the action shows enable-volume-io. This means that you may want to enable the I/O operations for the volume by calling the EnableVolumeIO action and then check the volume for data consistency.
Volume status is based on the volume status checks, and does not reflect the volume state. Therefore, volume status does not indicate volumes in the error state (for example, when a volume is incapable of accepting I/O.)
Describes the specified EBS volumes or all of your EBS volumes.
If you are describing a long list of volumes, we recommend that you paginate the output to make the list more manageable. The MaxResults parameter sets the maximum number of results returned in a single page. If the list of results exceeds your MaxResults value, then that number of results is returned along with a NextToken value that can be passed to a subsequent DescribeVolumes request to retrieve the remaining results.
For more information about EBS volumes, see Amazon EBS volumes in the Amazon Elastic Compute Cloud User Guide.
", - "DescribeVolumesModifications": "Describes the most recent volume modification request for the specified EBS volumes.
If a volume has never been modified, some information in the output will be null. If a volume has been modified more than once, the output includes only the most recent modification request.
You can also use CloudWatch Events to check the status of a modification to an EBS volume. For information about CloudWatch Events, see the Amazon CloudWatch Events User Guide. For more information, see Monitoring volume modifications in the Amazon Elastic Compute Cloud User Guide.
", + "DescribeVolumesModifications": "Describes the most recent volume modification request for the specified EBS volumes.
If a volume has never been modified, some information in the output will be null. If a volume has been modified more than once, the output includes only the most recent modification request.
You can also use CloudWatch Events to check the status of a modification to an EBS volume. For information about CloudWatch Events, see the Amazon CloudWatch Events User Guide. For more information, see Monitor the progress of volume modifications in the Amazon Elastic Compute Cloud User Guide.
", "DescribeVpcAttribute": "Describes the specified attribute of the specified VPC. You can specify only one attribute at a time.
", "DescribeVpcClassicLink": "Describes the ClassicLink status of one or more VPCs.
", "DescribeVpcClassicLinkDnsSupport": "Describes the ClassicLink DNS support status of one or more VPCs. If enabled, the DNS hostname of a linked EC2-Classic instance resolves to its private IP address when addressed from an instance in the VPC to which it's linked. Similarly, the DNS hostname of an instance in a VPC resolves to its private IP address when addressed from a linked EC2-Classic instance. For more information, see ClassicLink in the Amazon Elastic Compute Cloud User Guide.
", @@ -298,7 +298,7 @@ "DetachClassicLinkVpc": "Unlinks (detaches) a linked EC2-Classic instance from a VPC. After the instance has been unlinked, the VPC security groups are no longer associated with it. An instance is automatically unlinked from a VPC when it's stopped.
", "DetachInternetGateway": "Detaches an internet gateway from a VPC, disabling connectivity between the internet and the VPC. The VPC must not contain any running instances with Elastic IP addresses or public IPv4 addresses.
", "DetachNetworkInterface": "Detaches a network interface from an instance.
", - "DetachVolume": "Detaches an EBS volume from an instance. Make sure to unmount any file systems on the device within your operating system before detaching the volume. Failure to do so can result in the volume becoming stuck in the busy state while detaching. If this happens, detachment can be delayed indefinitely until you unmount the volume, force detachment, reboot the instance, or all three. If an EBS volume is the root device of an instance, it can't be detached while the instance is running. To detach the root volume, stop the instance first.
When a volume with an AWS Marketplace product code is detached from an instance, the product code is no longer associated with the instance.
For more information, see Detaching an Amazon EBS volume in the Amazon Elastic Compute Cloud User Guide.
", + "DetachVolume": "Detaches an EBS volume from an instance. Make sure to unmount any file systems on the device within your operating system before detaching the volume. Failure to do so can result in the volume becoming stuck in the busy state while detaching. If this happens, detachment can be delayed indefinitely until you unmount the volume, force detachment, reboot the instance, or all three. If an EBS volume is the root device of an instance, it can't be detached while the instance is running. To detach the root volume, stop the instance first.
When a volume with an Marketplace product code is detached from an instance, the product code is no longer associated with the instance.
For more information, see Detach an Amazon EBS volume in the Amazon Elastic Compute Cloud User Guide.
", "DetachVpnGateway": "Detaches a virtual private gateway from a VPC. You do this if you're planning to turn off the VPC and not use it anymore. You can confirm a virtual private gateway has been completely detached from a VPC by describing the virtual private gateway (any attachments to the virtual private gateway are also described).
You must wait for the attachment's state to switch to detached before you can delete the VPC or attach a different VPC to the virtual private gateway.
Disables EBS encryption by default for your account in the current Region.
After you disable encryption by default, you can still create encrypted volumes by enabling encryption when you create each volume.
Disabling encryption by default does not change the encryption status of your existing volumes.
For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
", "DisableFastSnapshotRestores": "Disables fast snapshot restores for the specified snapshots in the specified Availability Zones.
", @@ -319,7 +319,7 @@ "DisassociateTransitGatewayRouteTable": "Disassociates a resource attachment from a transit gateway route table.
", "DisassociateTrunkInterface": "Removes an association between a branch network interface with a trunk network interface.
", "DisassociateVpcCidrBlock": "Disassociates a CIDR block from a VPC. To disassociate the CIDR block, you must specify its association ID. You can get the association ID by using DescribeVpcs. You must detach or delete all gateways and resources that are associated with the CIDR block before you can disassociate it.
You cannot disassociate the CIDR block with which you originally created the VPC (the primary CIDR block).
", - "EnableEbsEncryptionByDefault": "Enables EBS encryption by default for your account in the current Region.
After you enable encryption by default, the EBS volumes that you create are always encrypted, either using the default CMK or the CMK that you specified when you created each volume. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
You can specify the default CMK for encryption by default using ModifyEbsDefaultKmsKeyId or ResetEbsDefaultKmsKeyId.
Enabling encryption by default has no effect on the encryption status of your existing volumes.
After you enable encryption by default, you can no longer launch instances using instance types that do not support encryption. For more information, see Supported instance types.
", + "EnableEbsEncryptionByDefault": "Enables EBS encryption by default for your account in the current Region.
After you enable encryption by default, the EBS volumes that you create are always encrypted, either using the default KMS key or the KMS key that you specified when you created each volume. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
You can specify the default KMS key for encryption by default using ModifyEbsDefaultKmsKeyId or ResetEbsDefaultKmsKeyId.
Enabling encryption by default has no effect on the encryption status of your existing volumes.
After you enable encryption by default, you can no longer launch instances using instance types that do not support encryption. For more information, see Supported instance types.
", "EnableFastSnapshotRestores": "Enables fast snapshot restores for the specified snapshots in the specified Availability Zones.
You get the full benefit of fast snapshot restores after they enter the enabled state. To get the current state of fast snapshot restores, use DescribeFastSnapshotRestores. To disable fast snapshot restores, use DisableFastSnapshotRestores.
For more information, see Amazon EBS fast snapshot restore in the Amazon Elastic Compute Cloud User Guide.
", "EnableImageDeprecation": "Enables deprecation of the specified AMI at the specified date and time.
For more information, see Deprecate an AMI in the Amazon Elastic Compute Cloud User Guide.
", "EnableSerialConsoleAccess": "Enables access to the EC2 serial console of all instances for your account. By default, access to the EC2 serial console is disabled for your account. For more information, see Manage account access to the EC2 serial console in the Amazon EC2 User Guide.
", @@ -339,7 +339,7 @@ "GetConsoleOutput": "Gets the console output for the specified instance. For Linux instances, the instance console output displays the exact console output that would normally be displayed on a physical monitor attached to a computer. For Windows instances, the instance console output includes the last three system event log errors.
By default, the console output returns buffered information that was posted shortly after an instance transition state (start, stop, reboot, or terminate). This information is available for at least one hour after the most recent post. Only the most recent 64 KB of console output is available.
You can optionally retrieve the latest serial console output at any time during the instance lifecycle. This option is supported on instance types that use the Nitro hypervisor.
For more information, see Instance console output in the Amazon EC2 User Guide.
", "GetConsoleScreenshot": "Retrieve a JPG-format screenshot of a running instance to help with troubleshooting.
The returned content is Base64-encoded.
", "GetDefaultCreditSpecification": "Describes the default credit option for CPU usage of a burstable performance instance family.
For more information, see Burstable performance instances in the Amazon EC2 User Guide.
", - "GetEbsDefaultKmsKeyId": "Describes the default customer master key (CMK) for EBS encryption by default for your account in this Region. You can change the default CMK for encryption by default using ModifyEbsDefaultKmsKeyId or ResetEbsDefaultKmsKeyId.
For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
", + "GetEbsDefaultKmsKeyId": "Describes the default KMS key for EBS encryption by default for your account in this Region. You can change the default KMS key for encryption by default using ModifyEbsDefaultKmsKeyId or ResetEbsDefaultKmsKeyId.
For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
", "GetEbsEncryptionByDefault": "Describes whether EBS encryption by default is enabled for your account in the current Region.
For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
", "GetFlowLogsIntegrationTemplate": "Generates a CloudFormation template that streamlines and automates the integration of VPC flow logs with Amazon Athena. This make it easier for you to query and gain insights from VPC flow logs data. Based on the information that you provide, we configure resources in the template to do the following:
Create a table in Athena that maps fields to a custom log format
Create a Lambda function that updates the table with new partitions on a daily, weekly, or monthly basis
Create a table partitioned between two timestamps in the past
Create a set of named queries in Athena that you can use to get started quickly
Lists the resource groups to which a Capacity Reservation has been added.
", @@ -366,7 +366,7 @@ "ModifyCapacityReservation": "Modifies a Capacity Reservation's capacity and the conditions under which it is to be released. You cannot change a Capacity Reservation's instance type, EBS optimization, instance store settings, platform, Availability Zone, or instance eligibility. If you need to modify any of these attributes, we recommend that you cancel the Capacity Reservation, and then create a new one with the required attributes.
", "ModifyClientVpnEndpoint": "Modifies the specified Client VPN endpoint. Modifying the DNS server resets existing client connections.
", "ModifyDefaultCreditSpecification": "Modifies the default credit option for CPU usage of burstable performance instances. The default credit option is set at the account level per Region, and is specified per instance family. All new burstable performance instances in the account launch using the default credit option.
ModifyDefaultCreditSpecification is an asynchronous operation, which works at an Region level and modifies the credit option for each Availability Zone. All zones in a Region are updated within five minutes. But if instances are launched during this operation, they might not get the new credit option until the zone is updated. To verify whether the update has occurred, you can call GetDefaultCreditSpecification and check DefaultCreditSpecification for updates.
For more information, see Burstable performance instances in the Amazon EC2 User Guide.
", - "ModifyEbsDefaultKmsKeyId": "Changes the default customer master key (CMK) for EBS encryption by default for your account in this Region.
AWS creates a unique AWS managed CMK in each Region for use with encryption by default. If you change the default CMK to a symmetric customer managed CMK, it is used instead of the AWS managed CMK. To reset the default CMK to the AWS managed CMK for EBS, use ResetEbsDefaultKmsKeyId. Amazon EBS does not support asymmetric CMKs.
If you delete or disable the customer managed CMK that you specified for use with encryption by default, your instances will fail to launch.
For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
", + "ModifyEbsDefaultKmsKeyId": "Changes the default KMS key for EBS encryption by default for your account in this Region.
Amazon Web Services creates a unique Amazon Web Services managed KMS key in each Region for use with encryption by default. If you change the default KMS key to a symmetric customer managed KMS key, it is used instead of the Amazon Web Services managed KMS key. To reset the default KMS key to the Amazon Web Services managed KMS key for EBS, use ResetEbsDefaultKmsKeyId. Amazon EBS does not support asymmetric KMS keys.
If you delete or disable the customer managed KMS key that you specified for use with encryption by default, your instances will fail to launch.
For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
", "ModifyFleet": "Modifies the specified EC2 Fleet.
You can only modify an EC2 Fleet request of type maintain.
While the EC2 Fleet is being modified, it is in the modifying state.
To scale up your EC2 Fleet, increase its target capacity. The EC2 Fleet launches the additional Spot Instances according to the allocation strategy for the EC2 Fleet request. If the allocation strategy is lowest-price, the EC2 Fleet launches instances using the Spot Instance pool with the lowest price. If the allocation strategy is diversified, the EC2 Fleet distributes the instances across the Spot Instance pools. If the allocation strategy is capacity-optimized, EC2 Fleet launches instances from Spot Instance pools with optimal capacity for the number of instances that are launching.
To scale down your EC2 Fleet, decrease its target capacity. First, the EC2 Fleet cancels any open requests that exceed the new target capacity. You can request that the EC2 Fleet terminate Spot Instances until the size of the fleet no longer exceeds the new target capacity. If the allocation strategy is lowest-price, the EC2 Fleet terminates the instances with the highest price per unit. If the allocation strategy is capacity-optimized, the EC2 Fleet terminates the instances in the Spot Instance pools that have the least available Spot Instance capacity. If the allocation strategy is diversified, the EC2 Fleet terminates instances across the Spot Instance pools. Alternatively, you can request that the EC2 Fleet keep the fleet at its current size, but not replace any Spot Instances that are interrupted or that you terminate manually.
If you are finished with your EC2 Fleet for now, but will use it again later, you can set the target capacity to 0.
", "ModifyFpgaImageAttribute": "Modifies the specified attribute of the specified Amazon FPGA Image (AFI).
", "ModifyHosts": "Modify the auto-placement setting of a Dedicated Host. When auto-placement is enabled, any instances that you launch with a tenancy of host but without a specific host ID are placed onto any available Dedicated Host in your account that has auto-placement enabled. When auto-placement is disabled, you need to provide a host ID to have the instance launch onto a specific host. If no host ID is provided, the instance is launched onto a suitable host with auto-placement enabled.
You can also use this API action to modify a Dedicated Host to support either multiple instance types in an instance family, or to support a specific instance type only.
", @@ -385,7 +385,7 @@ "ModifyNetworkInterfaceAttribute": "Modifies the specified network interface attribute. You can specify only one attribute at a time. You can use this action to attach and detach security groups from an existing EC2 instance.
", "ModifyReservedInstances": "Modifies the Availability Zone, instance count, instance type, or network platform (EC2-Classic or EC2-VPC) of your Reserved Instances. The Reserved Instances to be modified must be identical, except for Availability Zone, network platform, and instance type.
For more information, see Modifying Reserved Instances in the Amazon EC2 User Guide.
", "ModifySecurityGroupRules": "Modifies the rules of a security group.
", - "ModifySnapshotAttribute": "Adds or removes permission settings for the specified snapshot. You may add or remove specified AWS account IDs from a snapshot's list of create volume permissions, but you cannot do both in a single operation. If you need to both add and remove account IDs for a snapshot, you must use multiple operations. You can make up to 500 modifications to a snapshot in a single operation.
Encrypted snapshots and snapshots with AWS Marketplace product codes cannot be made public. Snapshots encrypted with your default CMK cannot be shared with other accounts.
For more information about modifying snapshot permissions, see Sharing snapshots in the Amazon Elastic Compute Cloud User Guide.
", + "ModifySnapshotAttribute": "Adds or removes permission settings for the specified snapshot. You may add or remove specified account IDs from a snapshot's list of create volume permissions, but you cannot do both in a single operation. If you need to both add and remove account IDs for a snapshot, you must use multiple operations. You can make up to 500 modifications to a snapshot in a single operation.
Encrypted snapshots and snapshots with Marketplace product codes cannot be made public. Snapshots encrypted with your default KMS key cannot be shared with other accounts.
For more information about modifying snapshot permissions, see Share a snapshot in the Amazon Elastic Compute Cloud User Guide.
", "ModifySpotFleetRequest": "Modifies the specified Spot Fleet request.
You can only modify a Spot Fleet request of type maintain.
While the Spot Fleet request is being modified, it is in the modifying state.
To scale up your Spot Fleet, increase its target capacity. The Spot Fleet launches the additional Spot Instances according to the allocation strategy for the Spot Fleet request. If the allocation strategy is lowestPrice, the Spot Fleet launches instances using the Spot Instance pool with the lowest price. If the allocation strategy is diversified, the Spot Fleet distributes the instances across the Spot Instance pools. If the allocation strategy is capacityOptimized, Spot Fleet launches instances from Spot Instance pools with optimal capacity for the number of instances that are launching.
To scale down your Spot Fleet, decrease its target capacity. First, the Spot Fleet cancels any open requests that exceed the new target capacity. You can request that the Spot Fleet terminate Spot Instances until the size of the fleet no longer exceeds the new target capacity. If the allocation strategy is lowestPrice, the Spot Fleet terminates the instances with the highest price per unit. If the allocation strategy is capacityOptimized, the Spot Fleet terminates the instances in the Spot Instance pools that have the least available Spot Instance capacity. If the allocation strategy is diversified, the Spot Fleet terminates instances across the Spot Instance pools. Alternatively, you can request that the Spot Fleet keep the fleet at its current size, but not replace any Spot Instances that are interrupted or that you terminate manually.
If you are finished with your Spot Fleet for now, but will use it again later, you can set the target capacity to 0.
", "ModifySubnetAttribute": "Modifies a subnet attribute. You can only modify one attribute at a time.
", "ModifyTrafficMirrorFilterNetworkServices": "Allows or restricts mirroring network services.
By default, Amazon DNS network services are not eligible for Traffic Mirror. Use AddNetworkServices to add network services to a Traffic Mirror filter. When a network service is added to the Traffic Mirror filter, all traffic related to that network service will be mirrored. When you no longer want to mirror network services, use RemoveNetworkServices to remove the network services from the Traffic Mirror filter.
For information about filter rule properties, see Network Services in the Traffic Mirroring User Guide .
", @@ -394,7 +394,7 @@ "ModifyTransitGateway": "Modifies the specified transit gateway. When you modify a transit gateway, the modified options are applied to new transit gateway attachments only. Your existing transit gateway attachments are not modified.
", "ModifyTransitGatewayPrefixListReference": "Modifies a reference (route) to a prefix list in a specified transit gateway route table.
", "ModifyTransitGatewayVpcAttachment": "Modifies the specified VPC attachment.
", - "ModifyVolume": "You can modify several parameters of an existing EBS volume, including volume size, volume type, and IOPS capacity. If your EBS volume is attached to a current-generation EC2 instance type, you might be able to apply these changes without stopping the instance or detaching the volume from it. For more information about modifying an EBS volume running Linux, see Modifying the size, IOPS, or type of an EBS volume on Linux. For more information about modifying an EBS volume running Windows, see Modifying the size, IOPS, or type of an EBS volume on Windows.
When you complete a resize operation on your volume, you need to extend the volume's file-system size to take advantage of the new storage capacity. For information about extending a Linux file system, see Extending a Linux file system. For information about extending a Windows file system, see Extending a Windows file system.
You can use CloudWatch Events to check the status of a modification to an EBS volume. For information about CloudWatch Events, see the Amazon CloudWatch Events User Guide. You can also track the status of a modification using DescribeVolumesModifications. For information about tracking status changes using either method, see Monitoring volume modifications.
With previous-generation instance types, resizing an EBS volume might require detaching and reattaching the volume or stopping and restarting the instance. For more information, see Amazon EBS Elastic Volumes (Linux) or Amazon EBS Elastic Volumes (Windows).
If you reach the maximum volume modification rate per volume limit, you will need to wait at least six hours before applying further modifications to the affected EBS volume.
", + "ModifyVolume": "You can modify several parameters of an existing EBS volume, including volume size, volume type, and IOPS capacity. If your EBS volume is attached to a current-generation EC2 instance type, you might be able to apply these changes without stopping the instance or detaching the volume from it. For more information about modifying EBS volumes, see Amazon EBS Elastic Volumes (Linux instances) or Amazon EBS Elastic Volumes (Windows instances).
When you complete a resize operation on your volume, you need to extend the volume's file-system size to take advantage of the new storage capacity. For more information, see Extend a Linux file system or Extend a Windows file system.
You can use CloudWatch Events to check the status of a modification to an EBS volume. For information about CloudWatch Events, see the Amazon CloudWatch Events User Guide. You can also track the status of a modification using DescribeVolumesModifications. For information about tracking status changes using either method, see Monitor the progress of volume modifications.
With previous-generation instance types, resizing an EBS volume might require detaching and reattaching the volume or stopping and restarting the instance.
If you reach the maximum volume modification rate per volume limit, you must wait at least six hours before applying further modifications to the affected EBS volume.
", "ModifyVolumeAttribute": "Modifies a volume attribute.
By default, all I/O operations for the volume are suspended when the data on the volume is determined to be potentially inconsistent, to prevent undetectable, latent data corruption. The I/O access to the volume can be resumed by first enabling I/O access and then checking the data consistency on your volume.
You can change the default behavior to resume I/O operations. We recommend that you change this only for boot volumes or for volumes that are stateless or disposable.
", "ModifyVpcAttribute": "Modifies the specified attribute of the specified VPC.
", "ModifyVpcEndpoint": "Modifies attributes of a specified VPC endpoint. The attributes that you can modify depend on the type of VPC endpoint (interface, gateway, or Gateway Load Balancer). For more information, see VPC Endpoints in the Amazon Virtual Private Cloud User Guide.
", @@ -435,12 +435,12 @@ "RequestSpotFleet": "Creates a Spot Fleet request.
The Spot Fleet request specifies the total target capacity and the On-Demand target capacity. Amazon EC2 calculates the difference between the total capacity and On-Demand capacity, and launches the difference as Spot capacity.
You can submit a single request that includes multiple launch specifications that vary by instance type, AMI, Availability Zone, or subnet.
By default, the Spot Fleet requests Spot Instances in the Spot Instance pool where the price per unit is the lowest. Each launch specification can include its own instance weighting that reflects the value of the instance type to your application workload.
Alternatively, you can specify that the Spot Fleet distribute the target capacity across the Spot pools included in its launch specifications. By ensuring that the Spot Instances in your Spot Fleet are in different Spot pools, you can improve the availability of your fleet.
You can specify tags for the Spot Fleet request and instances launched by the fleet. You cannot tag other resource types in a Spot Fleet request because only the spot-fleet-request and instance resource types are supported.
For more information, see Spot Fleet requests in the Amazon EC2 User Guide for Linux Instances.
", "RequestSpotInstances": "Creates a Spot Instance request.
For more information, see Spot Instance requests in the Amazon EC2 User Guide for Linux Instances.
", "ResetAddressAttribute": "Resets the attribute of the specified IP address. For requirements, see Using reverse DNS for email applications.
", - "ResetEbsDefaultKmsKeyId": "Resets the default customer master key (CMK) for EBS encryption for your account in this Region to the AWS managed CMK for EBS.
After resetting the default CMK to the AWS managed CMK, you can continue to encrypt by a customer managed CMK by specifying it when you create the volume. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
", + "ResetEbsDefaultKmsKeyId": "Resets the default KMS key for EBS encryption for your account in this Region to the Amazon Web Services managed KMS key for EBS.
After resetting the default KMS key to the Amazon Web Services managed KMS key, you can continue to encrypt by a customer managed KMS key by specifying it when you create the volume. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
", "ResetFpgaImageAttribute": "Resets the specified attribute of the specified Amazon FPGA Image (AFI) to its default value. You can only reset the load permission attribute.
", "ResetImageAttribute": "Resets an attribute of an AMI to its default value.
The productCodes attribute can't be reset.
Resets an attribute of an instance to its default value. To reset the kernel or ramdisk, the instance must be in a stopped state. To reset the sourceDestCheck, the instance can be either running or stopped.
The sourceDestCheck attribute controls whether source/destination checking is enabled. The default value is true, which means checking is enabled. This value must be false for a NAT instance to perform NAT. For more information, see NAT Instances in the Amazon VPC User Guide.
Resets a network interface attribute. You can specify only one attribute at a time.
", - "ResetSnapshotAttribute": "Resets permission settings for the specified snapshot.
For more information about modifying snapshot permissions, see Sharing snapshots in the Amazon Elastic Compute Cloud User Guide.
", + "ResetSnapshotAttribute": "Resets permission settings for the specified snapshot.
For more information about modifying snapshot permissions, see Share a snapshot in the Amazon Elastic Compute Cloud User Guide.
", "RestoreAddressToClassic": "Restores an Elastic IP address that was previously moved to the EC2-VPC platform back to the EC2-Classic platform. You cannot move an Elastic IP address that was originally allocated for use in EC2-VPC. The Elastic IP address must not be associated with an instance or network interface.
", "RestoreManagedPrefixListVersion": "Restores the entries from a previous version of a managed prefix list to a new version of the prefix list.
", "RevokeClientVpnIngress": "Removes an ingress authorization rule from a Client VPN endpoint.
", @@ -3495,8 +3495,8 @@ "CreateVolumePermissionList": { "base": null, "refs": { - "CreateVolumePermissionModifications$Add": "Adds the specified AWS account ID or group to the list.
", - "CreateVolumePermissionModifications$Remove": "Removes the specified AWS account ID or group from the list.
", + "CreateVolumePermissionModifications$Add": "Adds the specified account ID or group to the list.
", + "CreateVolumePermissionModifications$Remove": "Removes the specified account ID or group from the list.
", "DescribeSnapshotAttributeResult$CreateVolumePermissions": "The users and groups that have the permissions for creating volumes from the snapshot.
" } }, @@ -7004,7 +7004,7 @@ "DescribeElasticGpusRequest$Filters": "The filters.
availability-zone - The Availability Zone in which the Elastic Graphics accelerator resides.
elastic-gpu-health - The status of the Elastic Graphics accelerator (OK | IMPAIRED).
elastic-gpu-state - The state of the Elastic Graphics accelerator (ATTACHED).
elastic-gpu-type - The type of Elastic Graphics accelerator; for example, eg1.medium.
instance-id - The ID of the instance to which the Elastic Graphics accelerator is associated.
Filter tasks using the task-state filter and one of the following values: active, completed, deleting, or deleted.
the filters for the export tasks.
", - "DescribeFastSnapshotRestoresRequest$Filters": "The filters. The possible values are:
availability-zone: The Availability Zone of the snapshot.
owner-id: The ID of the AWS account that enabled fast snapshot restore on the snapshot.
snapshot-id: The ID of the snapshot.
state: The state of fast snapshot restores for the snapshot (enabling | optimizing | enabled | disabling | disabled).
The filters. The possible values are:
availability-zone: The Availability Zone of the snapshot.
owner-id: The ID of the account that enabled fast snapshot restore on the snapshot.
snapshot-id: The ID of the snapshot.
state: The state of fast snapshot restores for the snapshot (enabling | optimizing | enabled | disabling | disabled).
The filters.
instance-type - The instance type.
The filters.
activity-status - The progress of the EC2 Fleet ( error | pending-fulfillment | pending-termination | fulfilled).
excess-capacity-termination-policy - Indicates whether to terminate running instances if the target capacity is decreased below the current EC2 Fleet size (true | false).
fleet-state - The state of the EC2 Fleet (submitted | active | deleted | failed | deleted-running | deleted-terminating | modifying).
replace-unhealthy-instances - Indicates whether EC2 Fleet should replace unhealthy instances (true | false).
type - The type of request (instant | request | maintain).
One or more filters.
deliver-log-status - The status of the logs delivery (SUCCESS | FAILED).
log-destination-type - The type of destination to which the flow log publishes data. Possible destination types include cloud-watch-logs and s3.
flow-log-id - The ID of the flow log.
log-group-name - The name of the log group.
resource-id - The ID of the VPC, subnet, or network interface.
traffic-type - The type of traffic (ACCEPT | REJECT | ALL).
tag:<key> - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.
tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.
The filters.
availability-zone - The Availability Zone (for example, us-west-2a).
instance-type - The instance type (for example, c4.large).
network-platform - The network platform (EC2-Classic or EC2-VPC).
platform - The platform (Linux/UNIX or Windows).
One or more filters.
group-id - The ID of the security group.
security-group-rule-id - The ID of the security group rule.
tag:<key> - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.
The filters. If using multiple filters for rules, the results include security groups for which any combination of rules - not necessarily a single rule - match all filters.
description - The description of the security group.
egress.ip-permission.cidr - An IPv4 CIDR block for an outbound security group rule.
egress.ip-permission.from-port - For an outbound rule, the start of port range for the TCP and UDP protocols, or an ICMP type number.
egress.ip-permission.group-id - The ID of a security group that has been referenced in an outbound security group rule.
egress.ip-permission.group-name - The name of a security group that is referenced in an outbound security group rule.
egress.ip-permission.ipv6-cidr - An IPv6 CIDR block for an outbound security group rule.
egress.ip-permission.prefix-list-id - The ID of a prefix list to which a security group rule allows outbound access.
egress.ip-permission.protocol - The IP protocol for an outbound security group rule (tcp | udp | icmp, a protocol number, or -1 for all protocols).
egress.ip-permission.to-port - For an outbound rule, the end of port range for the TCP and UDP protocols, or an ICMP code.
egress.ip-permission.user-id - The ID of an Amazon Web Services account that has been referenced in an outbound security group rule.
group-id - The ID of the security group.
group-name - The name of the security group.
ip-permission.cidr - An IPv4 CIDR block for an inbound security group rule.
ip-permission.from-port - For an inbound rule, the start of port range for the TCP and UDP protocols, or an ICMP type number.
ip-permission.group-id - The ID of a security group that has been referenced in an inbound security group rule.
ip-permission.group-name - The name of a security group that is referenced in an inbound security group rule.
ip-permission.ipv6-cidr - An IPv6 CIDR block for an inbound security group rule.
ip-permission.prefix-list-id - The ID of a prefix list from which a security group rule allows inbound access.
ip-permission.protocol - The IP protocol for an inbound security group rule (tcp | udp | icmp, a protocol number, or -1 for all protocols).
ip-permission.to-port - For an inbound rule, the end of port range for the TCP and UDP protocols, or an ICMP code.
ip-permission.user-id - The ID of an Amazon Web Services account that has been referenced in an inbound security group rule.
owner-id - The Amazon Web Services account ID of the owner of the security group.
tag:<key> - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.
tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.
vpc-id - The ID of the VPC specified when the security group was created.
The filters.
description - A description of the snapshot.
encrypted - Indicates whether the snapshot is encrypted (true | false)
owner-alias - The owner alias, from an Amazon-maintained list (amazon). This is not the user-configured AWS account alias set using the IAM console. We recommend that you use the related parameter instead of this filter.
owner-id - The AWS account ID of the owner. We recommend that you use the related parameter instead of this filter.
progress - The progress of the snapshot, as a percentage (for example, 80%).
snapshot-id - The snapshot ID.
start-time - The time stamp when the snapshot was initiated.
status - The status of the snapshot (pending | completed | error).
tag:<key> - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.
tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.
volume-id - The ID of the volume the snapshot is for.
volume-size - The size of the volume, in GiB.
The filters.
description - A description of the snapshot.
encrypted - Indicates whether the snapshot is encrypted (true | false)
owner-alias - The owner alias, from an Amazon-maintained list (amazon). This is not the user-configured account alias set using the IAM console. We recommend that you use the related parameter instead of this filter.
owner-id - The account ID of the owner. We recommend that you use the related parameter instead of this filter.
progress - The progress of the snapshot, as a percentage (for example, 80%).
snapshot-id - The snapshot ID.
start-time - The time stamp when the snapshot was initiated.
status - The status of the snapshot (pending | completed | error).
tag:<key> - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.
tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.
volume-id - The ID of the volume the snapshot is for.
volume-size - The size of the volume, in GiB.
One or more filters.
availability-zone-group - The Availability Zone group.
create-time - The time stamp when the Spot Instance request was created.
fault-code - The fault code related to the request.
fault-message - The fault message related to the request.
instance-id - The ID of the instance that fulfilled the request.
launch-group - The Spot Instance launch group.
launch.block-device-mapping.delete-on-termination - Indicates whether the EBS volume is deleted on instance termination.
launch.block-device-mapping.device-name - The device name for the volume in the block device mapping (for example, /dev/sdh or xvdh).
launch.block-device-mapping.snapshot-id - The ID of the snapshot for the EBS volume.
launch.block-device-mapping.volume-size - The size of the EBS volume, in GiB.
launch.block-device-mapping.volume-type - The type of EBS volume: gp2 for General Purpose SSD, io1 or io2 for Provisioned IOPS SSD, st1 for Throughput Optimized HDD, sc1for Cold HDD, or standard for Magnetic.
launch.group-id - The ID of the security group for the instance.
launch.group-name - The name of the security group for the instance.
launch.image-id - The ID of the AMI.
launch.instance-type - The type of instance (for example, m3.medium).
launch.kernel-id - The kernel ID.
launch.key-name - The name of the key pair the instance launched with.
launch.monitoring-enabled - Whether detailed monitoring is enabled for the Spot Instance.
launch.ramdisk-id - The RAM disk ID.
launched-availability-zone - The Availability Zone in which the request is launched.
network-interface.addresses.primary - Indicates whether the IP address is the primary private IP address.
network-interface.delete-on-termination - Indicates whether the network interface is deleted when the instance is terminated.
network-interface.description - A description of the network interface.
network-interface.device-index - The index of the device for the network interface attachment on the instance.
network-interface.group-id - The ID of the security group associated with the network interface.
network-interface.network-interface-id - The ID of the network interface.
network-interface.private-ip-address - The primary private IP address of the network interface.
network-interface.subnet-id - The ID of the subnet for the instance.
product-description - The product description associated with the instance (Linux/UNIX | Windows).
spot-instance-request-id - The Spot Instance request ID.
spot-price - The maximum hourly price for any Spot Instance launched to fulfill the request.
state - The state of the Spot Instance request (open | active | closed | cancelled | failed). Spot request status information can help you track your Amazon EC2 Spot Instance requests. For more information, see Spot request status in the Amazon EC2 User Guide for Linux Instances.
status-code - The short code describing the most recent evaluation of your Spot Instance request.
status-message - The message explaining the status of the Spot Instance request.
tag:<key> - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.
tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.
type - The type of Spot Instance request (one-time | persistent).
valid-from - The start date of the request.
valid-until - The end date of the request.
One or more filters.
availability-zone - The Availability Zone for which prices should be returned.
instance-type - The type of instance (for example, m3.medium).
product-description - The product description for the Spot price (Linux/UNIX | Red Hat Enterprise Linux | SUSE Linux | Windows | Linux/UNIX (Amazon VPC) | Red Hat Enterprise Linux (Amazon VPC) | SUSE Linux (Amazon VPC) | Windows (Amazon VPC)).
spot-price - The Spot price. The value must match exactly (or use wildcards; greater than or less than comparison is not supported).
timestamp - The time stamp of the Spot price history, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). You can use wildcards (* and ?). Greater than or less than comparison is not supported.
The filters.
task-state - Returns tasks in a certain state (InProgress | Completed | Failed)
bucket - Returns task information for tasks that targeted a specific bucket. For the filter value, specify the bucket name.
The number of bytes in each packet to mirror. These are bytes after the VXLAN header. Do not specify this parameter when you want to mirror the entire packet. To mirror a subset of the packet, set this to the length (in bytes) that you want to mirror. For example, if you set this value to 100, then the first 100 bytes that meet the filter criteria are copied to the target.
If you do not want to mirror the entire packet, use the PacketLength parameter to specify the number of bytes in each packet to mirror.
The session number determines the order in which sessions are evaluated when an interface is used by multiple sessions. The first session with a matching filter is the one that mirrors the packets.
Valid values are 1-32766.
", "CreateTrafficMirrorSessionRequest$VirtualNetworkId": "The VXLAN ID for the Traffic Mirror session. For more information about the VXLAN protocol, see RFC 7348. If you do not specify a VirtualNetworkId, an account-wide unique id is chosen at random.
The number of I/O operations per second (IOPS). For gp3, io1, and io2 volumes, this represents the number of IOPS that are provisioned for the volume. For gp2 volumes, this represents the baseline performance of the volume and the rate at which the volume accumulates I/O credits for bursting.
The following are the supported values for each volume type:
gp3: 3,000-16,000 IOPS
io1: 100-64,000 IOPS
io2: 100-64,000 IOPS
For io1 and io2 volumes, we guarantee 64,000 IOPS only for Instances built on the Nitro System. Other instance families guarantee performance up to 32,000 IOPS.
This parameter is required for io1 and io2 volumes. The default for gp3 volumes is 3,000 IOPS. This parameter is not supported for gp2, st1, sc1, or standard volumes.
The number of I/O operations per second (IOPS). For gp3, io1, and io2 volumes, this represents the number of IOPS that are provisioned for the volume. For gp2 volumes, this represents the baseline performance of the volume and the rate at which the volume accumulates I/O credits for bursting.
The following are the supported values for each volume type:
gp3: 3,000-16,000 IOPS
io1: 100-64,000 IOPS
io2: 100-64,000 IOPS
io1 and io2 volumes support up to 64,000 IOPS only on Instances built on the Nitro System. Other instance families support performance up to 32,000 IOPS.
This parameter is required for io1 and io2 volumes. The default for gp3 volumes is 3,000 IOPS. This parameter is not supported for gp2, st1, sc1, or standard volumes.
The size of the volume, in GiBs. You must specify either a snapshot ID or a volume size. If you specify a snapshot, the default is the snapshot size. You can specify a volume size that is equal to or larger than the snapshot size.
The following are the supported volumes sizes for each volume type:
gp2 and gp3: 1-16,384
io1 and io2: 4-16,384
st1 and sc1: 125-16,384
standard: 1-1,024
The throughput to provision for a volume, with a maximum of 1,000 MiB/s.
This parameter is valid only for gp3 volumes.
Valid Range: Minimum value of 125. Maximum value of 1000.
", "DeleteNetworkAclEntryRequest$RuleNumber": "The rule number of the entry to delete.
", @@ -9103,9 +9103,9 @@ "ModifyTrafficMirrorSessionRequest$PacketLength": "The number of bytes in each packet to mirror. These are bytes after the VXLAN header. To mirror a subset, set this to the length (in bytes) to mirror. For example, if you set this value to 100, then the first 100 bytes that meet the filter criteria are copied to the target. Do not specify this parameter when you want to mirror the entire packet.
", "ModifyTrafficMirrorSessionRequest$SessionNumber": "The session number determines the order in which sessions are evaluated when an interface is used by multiple sessions. The first session with a matching filter is the one that mirrors the packets.
Valid values are 1-32766.
", "ModifyTrafficMirrorSessionRequest$VirtualNetworkId": "The virtual network ID of the Traffic Mirror session.
", - "ModifyVolumeRequest$Size": "The target size of the volume, in GiB. The target volume size must be greater than or equal to the existing size of the volume.
The following are the supported volumes sizes for each volume type:
gp2 and gp3: 1-16,384
io1 and io2: 4-16,384
st1 and sc1: 125-16,384
standard: 1-1,024
Default: If no size is specified, the existing size is retained.
", - "ModifyVolumeRequest$Iops": "The target IOPS rate of the volume. This parameter is valid only for gp3, io1, and io2 volumes.
The following are the supported values for each volume type:
gp3: 3,000-16,000 IOPS
io1: 100-64,000 IOPS
io2: 100-64,000 IOPS
Default: If no IOPS value is specified, the existing value is retained, unless a volume type is modified that supports different values.
", - "ModifyVolumeRequest$Throughput": "The target throughput of the volume, in MiB/s. This parameter is valid only for gp3 volumes. The maximum value is 1,000.
Default: If no throughput value is specified, the existing value is retained.
Valid Range: Minimum value of 125. Maximum value of 1000.
", + "ModifyVolumeRequest$Size": "The target size of the volume, in GiB. The target volume size must be greater than or equal to the existing size of the volume.
The following are the supported volumes sizes for each volume type:
gp2 and gp3: 1-16,384
io1 and io2: 4-16,384
st1 and sc1: 125-16,384
standard: 1-1,024
Default: The existing size is retained.
", + "ModifyVolumeRequest$Iops": "The target IOPS rate of the volume. This parameter is valid only for gp3, io1, and io2 volumes.
The following are the supported values for each volume type:
gp3: 3,000-16,000 IOPS
io1: 100-64,000 IOPS
io2: 100-64,000 IOPS
Default: The existing value is retained if you keep the same volume type. If you change the volume type to io1, io2, or gp3, the default is 3,000.
The target throughput of the volume, in MiB/s. This parameter is valid only for gp3 volumes. The maximum value is 1,000.
Default: The existing value is retained if the source and target volume type is gp3. Otherwise, the default value is 125.
Valid Range: Minimum value of 125. Maximum value of 1000.
", "ModifyVpnTunnelOptionsSpecification$Phase1LifetimeSeconds": "The lifetime for phase 1 of the IKE negotiation, in seconds.
Constraints: A value between 900 and 28,800.
Default: 28800
The lifetime for phase 2 of the IKE negotiation, in seconds.
Constraints: A value between 900 and 3,600. The value must be less than the value for Phase1LifetimeSeconds.
Default: 3600
The margin time, in seconds, before the phase 2 lifetime expires, during which the AWS side of the VPN connection performs an IKE rekey. The exact time of the rekey is randomly selected based on the value for RekeyFuzzPercentage.
Constraints: A value between 60 and half of Phase2LifetimeSeconds.
Default: 540
The identifier of the symmetric AWS Key Management Service (AWS KMS) customer master key (CMK) to use when creating encrypted volumes. If this parameter is not specified, your AWS managed CMK for EBS is used. If you specify a CMK, you must also set the encrypted state to true.
You can specify a CMK using any of the following:
Key ID. For example, 1234abcd-12ab-34cd-56ef-1234567890ab.
Key alias. For example, alias/ExampleAlias.
Key ARN. For example, arn:aws:kms:us-east-1:012345678910:key/1234abcd-12ab-34cd-56ef-1234567890ab.
Alias ARN. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias.
AWS authenticates the CMK asynchronously. Therefore, if you specify an identifier that is not valid, the action can appear to complete, but eventually fails.
The specified CMK must exist in the destination Region.
Amazon EBS does not support asymmetric CMKs.
", - "CopySnapshotRequest$KmsKeyId": "The identifier of the AWS Key Management Service (AWS KMS) customer master key (CMK) to use for Amazon EBS encryption. If this parameter is not specified, your AWS managed CMK for EBS is used. If KmsKeyId is specified, the encrypted state must be true.
You can specify the CMK using any of the following:
Key ID. For example, 1234abcd-12ab-34cd-56ef-1234567890ab.
Key alias. For example, alias/ExampleAlias.
Key ARN. For example, arn:aws:kms:us-east-1:012345678910:key/1234abcd-12ab-34cd-56ef-1234567890ab.
Alias ARN. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias.
AWS authenticates the CMK asynchronously. Therefore, if you specify an ID, alias, or ARN that is not valid, the action can appear to complete, but eventually fails.
", - "CreateVolumeRequest$KmsKeyId": "The identifier of the AWS Key Management Service (AWS KMS) customer master key (CMK) to use for Amazon EBS encryption. If this parameter is not specified, your AWS managed CMK for EBS is used. If KmsKeyId is specified, the encrypted state must be true.
You can specify the CMK using any of the following:
Key ID. For example, 1234abcd-12ab-34cd-56ef-1234567890ab.
Key alias. For example, alias/ExampleAlias.
Key ARN. For example, arn:aws:kms:us-east-1:012345678910:key/1234abcd-12ab-34cd-56ef-1234567890ab.
Alias ARN. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias.
AWS authenticates the CMK asynchronously. Therefore, if you specify an ID, alias, or ARN that is not valid, the action can appear to complete, but eventually fails.
", + "CopySnapshotRequest$KmsKeyId": "The identifier of the Key Management Service (KMS) KMS key to use for Amazon EBS encryption. If this parameter is not specified, your KMS key for Amazon EBS is used. If KmsKeyId is specified, the encrypted state must be true.
You can specify the KMS key using any of the following:
Key ID. For example, 1234abcd-12ab-34cd-56ef-1234567890ab.
Key alias. For example, alias/ExampleAlias.
Key ARN. For example, arn:aws:kms:us-east-1:012345678910:key/1234abcd-12ab-34cd-56ef-1234567890ab.
Alias ARN. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias.
Amazon Web Services authenticates the KMS key asynchronously. Therefore, if you specify an ID, alias, or ARN that is not valid, the action can appear to complete, but eventually fails.
", + "CreateVolumeRequest$KmsKeyId": "The identifier of the Key Management Service (KMS) KMS key to use for Amazon EBS encryption. If this parameter is not specified, your KMS key for Amazon EBS is used. If KmsKeyId is specified, the encrypted state must be true.
You can specify the KMS key using any of the following:
Key ID. For example, 1234abcd-12ab-34cd-56ef-1234567890ab.
Key alias. For example, alias/ExampleAlias.
Key ARN. For example, arn:aws:kms:us-east-1:012345678910:key/1234abcd-12ab-34cd-56ef-1234567890ab.
Alias ARN. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias.
Amazon Web Services authenticates the KMS key asynchronously. Therefore, if you specify an ID, alias, or ARN that is not valid, the action can appear to complete, but eventually fails.
", "ImportImageRequest$KmsKeyId": "An identifier for the symmetric AWS Key Management Service (AWS KMS) customer master key (CMK) to use when creating the encrypted AMI. This parameter is only required if you want to use a non-default CMK; if this parameter is not specified, the default CMK for EBS is used. If a KmsKeyId is specified, the Encrypted flag must also be set.
The CMK identifier may be provided in any of the following formats:
Key ID
Key alias. The alias ARN contains the arn:aws:kms namespace, followed by the Region of the CMK, the AWS account ID of the CMK owner, the alias namespace, and then the CMK alias. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias.
ARN using key ID. The ID ARN contains the arn:aws:kms namespace, followed by the Region of the CMK, the AWS account ID of the CMK owner, the key namespace, and then the CMK ID. For example, arn:aws:kms:us-east-1:012345678910:key/abcd1234-a123-456a-a12b-a123b4cd56ef.
ARN using key alias. The alias ARN contains the arn:aws:kms namespace, followed by the Region of the CMK, the AWS account ID of the CMK owner, the alias namespace, and then the CMK alias. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias.
AWS parses KmsKeyId asynchronously, meaning that the action you call may appear to complete even though you provided an invalid identifier. This action will eventually report failure.
The specified CMK must exist in the Region that the AMI is being copied to.
Amazon EBS does not support asymmetric CMKs.
", "ImportImageResult$KmsKeyId": "The identifier for the symmetric AWS Key Management Service (AWS KMS) customer master key (CMK) that was used to create the encrypted AMI.
", "ImportSnapshotRequest$KmsKeyId": "An identifier for the symmetric AWS Key Management Service (AWS KMS) customer master key (CMK) to use when creating the encrypted snapshot. This parameter is only required if you want to use a non-default CMK; if this parameter is not specified, the default CMK for EBS is used. If a KmsKeyId is specified, the Encrypted flag must also be set.
The CMK identifier may be provided in any of the following formats:
Key ID
Key alias. The alias ARN contains the arn:aws:kms namespace, followed by the Region of the CMK, the AWS account ID of the CMK owner, the alias namespace, and then the CMK alias. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias.
ARN using key ID. The ID ARN contains the arn:aws:kms namespace, followed by the Region of the CMK, the AWS account ID of the CMK owner, the key namespace, and then the CMK ID. For example, arn:aws:kms:us-east-1:012345678910:key/abcd1234-a123-456a-a12b-a123b4cd56ef.
ARN using key alias. The alias ARN contains the arn:aws:kms namespace, followed by the Region of the CMK, the AWS account ID of the CMK owner, the alias namespace, and then the CMK alias. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias.
AWS parses KmsKeyId asynchronously, meaning that the action you call may appear to complete even though you provided an invalid identifier. This action will eventually report failure.
The specified CMK must exist in the Region that the snapshot is being copied to.
Amazon EBS does not support asymmetric CMKs.
", "LaunchTemplateEbsBlockDevice$KmsKeyId": "The ARN of the AWS Key Management Service (AWS KMS) CMK used for encryption.
", "LaunchTemplateEbsBlockDeviceRequest$KmsKeyId": "The ARN of the symmetric AWS Key Management Service (AWS KMS) CMK used for encryption.
", - "ModifyEbsDefaultKmsKeyIdRequest$KmsKeyId": "The identifier of the AWS Key Management Service (AWS KMS) customer master key (CMK) to use for Amazon EBS encryption. If this parameter is not specified, your AWS managed CMK for EBS is used. If KmsKeyId is specified, the encrypted state must be true.
You can specify the CMK using any of the following:
Key ID. For example, 1234abcd-12ab-34cd-56ef-1234567890ab.
Key alias. For example, alias/ExampleAlias.
Key ARN. For example, arn:aws:kms:us-east-1:012345678910:key/1234abcd-12ab-34cd-56ef-1234567890ab.
Alias ARN. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias.
AWS authenticates the CMK asynchronously. Therefore, if you specify an ID, alias, or ARN that is not valid, the action can appear to complete, but eventually fails.
Amazon EBS does not support asymmetric CMKs.
" + "ModifyEbsDefaultKmsKeyIdRequest$KmsKeyId": "The identifier of the Key Management Service (KMS) KMS key to use for Amazon EBS encryption. If this parameter is not specified, your KMS key for Amazon EBS is used. If KmsKeyId is specified, the encrypted state must be true.
You can specify the KMS key using any of the following:
Key ID. For example, 1234abcd-12ab-34cd-56ef-1234567890ab.
Key alias. For example, alias/ExampleAlias.
Key ARN. For example, arn:aws:kms:us-east-1:012345678910:key/1234abcd-12ab-34cd-56ef-1234567890ab.
Alias ARN. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias.
Amazon Web Services authenticates the KMS key asynchronously. Therefore, if you specify an ID, alias, or ARN that is not valid, the action can appear to complete, but eventually fails.
Amazon EBS does not support asymmetric KMS keys.
" } }, "LastError": { @@ -11412,7 +11412,7 @@ "refs": { "DescribeFpgaImagesRequest$Owners": "Filters the AFI by owner. Specify an AWS account ID, self (owner is the sender of the request), or an AWS owner alias (valid values are amazon | aws-marketplace).
Scopes the results to images with the specified owners. You can specify a combination of AWS account IDs, self, amazon, and aws-marketplace. If you omit this parameter, the results include all images for which you have launch permissions, regardless of ownership.
Scopes the results to snapshots with the specified owners. You can specify a combination of AWS account IDs, self, and amazon.
Scopes the results to snapshots with the specified owners. You can specify a combination of account IDs, self, and amazon.
The IDs of the AWS accounts that can create volumes from the snapshot.
" + "DescribeSnapshotsRequest$RestorableByUserIds": "The IDs of the accounts that can create volumes from the snapshot.
" } }, "RestoreAddressToClassicRequest": { @@ -13544,7 +13544,7 @@ "refs": { "DescribeSnapshotsRequest$SnapshotIds": "The snapshot IDs.
Default: Describes the snapshots for which you have create volume permissions.
", "DisableFastSnapshotRestoresRequest$SourceSnapshotIds": "The IDs of one or more snapshots. For example, snap-1234567890abcdef0.
The IDs of one or more snapshots. For example, snap-1234567890abcdef0. You can specify a snapshot that was shared with you from another AWS account.
The IDs of one or more snapshots. For example, snap-1234567890abcdef0. You can specify a snapshot that was shared with you from another account.
The Amazon Resource Name (ARN) of the Outpost to which to copy the AMI. Only specify this parameter when copying an AMI from an AWS Region to an Outpost. The AMI must be in the Region of the destination Outpost. You cannot copy an AMI from an Outpost to a Region, from one Outpost to another, or within the same Outpost.
For more information, see Copying AMIs from an AWS Region to an Outpost in the Amazon Elastic Compute Cloud User Guide.
", "CopyImageResult$ImageId": "The ID of the new AMI.
", "CopySnapshotRequest$Description": "A description for the EBS snapshot.
", - "CopySnapshotRequest$DestinationOutpostArn": "The Amazon Resource Name (ARN) of the Outpost to which to copy the snapshot. Only specify this parameter when copying a snapshot from an AWS Region to an Outpost. The snapshot must be in the Region for the destination Outpost. You cannot copy a snapshot from an Outpost to a Region, from one Outpost to another, or within the same Outpost.
For more information, see Copying snapshots from an AWS Region to an Outpost in the Amazon Elastic Compute Cloud User Guide.
", - "CopySnapshotRequest$DestinationRegion": "The destination Region to use in the PresignedUrl parameter of a snapshot copy operation. This parameter is only valid for specifying the destination Region in a PresignedUrl parameter, where it is required.
The snapshot copy is sent to the regional endpoint that you sent the HTTP request to (for example, ec2.us-east-1.amazonaws.com). With the AWS CLI, this is specified using the --region parameter or the default Region in your AWS configuration file.
When you copy an encrypted source snapshot using the Amazon EC2 Query API, you must supply a pre-signed URL. This parameter is optional for unencrypted snapshots. For more information, see Query requests.
The PresignedUrl should use the snapshot source endpoint, the CopySnapshot action, and include the SourceRegion, SourceSnapshotId, and DestinationRegion parameters. The PresignedUrl must be signed using AWS Signature Version 4. Because EBS snapshots are stored in Amazon S3, the signing algorithm for this parameter uses the same logic that is described in Authenticating Requests: Using Query Parameters (AWS Signature Version 4) in the Amazon Simple Storage Service API Reference. An invalid or improperly signed PresignedUrl will cause the copy operation to fail asynchronously, and the snapshot will move to an error state.
The Amazon Resource Name (ARN) of the Outpost to which to copy the snapshot. Only specify this parameter when copying a snapshot from an Amazon Web Services Region to an Outpost. The snapshot must be in the Region for the destination Outpost. You cannot copy a snapshot from an Outpost to a Region, from one Outpost to another, or within the same Outpost.
For more information, see Copy snapshots from an Amazon Web Services Region to an Outpost in the Amazon Elastic Compute Cloud User Guide.
", + "CopySnapshotRequest$DestinationRegion": "The destination Region to use in the PresignedUrl parameter of a snapshot copy operation. This parameter is only valid for specifying the destination Region in a PresignedUrl parameter, where it is required.
The snapshot copy is sent to the regional endpoint that you sent the HTTP request to (for example, ec2.us-east-1.amazonaws.com). With the CLI, this is specified using the --region parameter or the default Region in your Amazon Web Services configuration file.
When you copy an encrypted source snapshot using the Amazon EC2 Query API, you must supply a pre-signed URL. This parameter is optional for unencrypted snapshots. For more information, see Query requests.
The PresignedUrl should use the snapshot source endpoint, the CopySnapshot action, and include the SourceRegion, SourceSnapshotId, and DestinationRegion parameters. The PresignedUrl must be signed using Amazon Web Services Signature Version 4. Because EBS snapshots are stored in Amazon S3, the signing algorithm for this parameter uses the same logic that is described in Authenticating Requests: Using Query Parameters (Amazon Web Services Signature Version 4) in the Amazon Simple Storage Service API Reference. An invalid or improperly signed PresignedUrl will cause the copy operation to fail asynchronously, and the snapshot will move to an error state.
The ID of the Region that contains the snapshot to be copied.
", "CopySnapshotRequest$SourceSnapshotId": "The ID of the EBS snapshot to copy.
", "CopySnapshotResult$SnapshotId": "The ID of the new snapshot.
", @@ -14190,7 +14190,7 @@ "CreateNetworkInterfaceRequest$ClientToken": "Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see Ensuring Idempotency.
", "CreateNetworkInterfaceResult$ClientToken": "The token to use to retrieve the next page of results. This value is null when there are no more results to return.
A name for the placement group. Must be unique within the scope of your account for the Region.
Constraints: Up to 255 ASCII characters
", - "CreateReplaceRootVolumeTaskRequest$ClientToken": "Unique, case-sensitive identifier you provide to ensure the idempotency of the request. If you do not specify a client token, a randomly generated token is used for the request to ensure idempotency. For more information, see Ensuring Idempotency.
", + "CreateReplaceRootVolumeTaskRequest$ClientToken": "Unique, case-sensitive identifier you provide to ensure the idempotency of the request. If you do not specify a client token, a randomly generated token is used for the request to ensure idempotency. For more information, see Ensuring idempotency.
", "CreateReservedInstancesListingRequest$ClientToken": "Unique, case-sensitive identifier you provide to ensure idempotency of your listings. This helps avoid duplicate listings. For more information, see Ensuring Idempotency.
", "CreateRestoreImageTaskRequest$Bucket": "The name of the S3 bucket that contains the stored AMI object.
", "CreateRestoreImageTaskRequest$ObjectKey": "The name of the stored AMI object in the bucket.
", @@ -14202,9 +14202,9 @@ "CreateSecurityGroupRequest$GroupName": "The name of the security group.
Constraints: Up to 255 characters in length. Cannot start with sg-.
Constraints for EC2-Classic: ASCII characters
Constraints for EC2-VPC: a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=&;{}!$*
", "CreateSecurityGroupResult$GroupId": "The ID of the security group.
", "CreateSnapshotRequest$Description": "A description for the snapshot.
", - "CreateSnapshotRequest$OutpostArn": "The Amazon Resource Name (ARN) of the AWS Outpost on which to create a local snapshot.
To create a snapshot of a volume in a Region, omit this parameter. The snapshot is created in the same Region as the volume.
To create a snapshot of a volume on an Outpost and store the snapshot in the Region, omit this parameter. The snapshot is created in the Region for the Outpost.
To create a snapshot of a volume on an Outpost and store the snapshot on an Outpost, specify the ARN of the destination Outpost. The snapshot must be created on the same Outpost as the volume.
For more information, see Creating local snapshots from volumes on an Outpost in the Amazon Elastic Compute Cloud User Guide.
", + "CreateSnapshotRequest$OutpostArn": "The Amazon Resource Name (ARN) of the Outpost on which to create a local snapshot.
To create a snapshot of a volume in a Region, omit this parameter. The snapshot is created in the same Region as the volume.
To create a snapshot of a volume on an Outpost and store the snapshot in the Region, omit this parameter. The snapshot is created in the Region for the Outpost.
To create a snapshot of a volume on an Outpost and store the snapshot on an Outpost, specify the ARN of the destination Outpost. The snapshot must be created on the same Outpost as the volume.
For more information, see Create local snapshots from volumes on an Outpost in the Amazon Elastic Compute Cloud User Guide.
", "CreateSnapshotsRequest$Description": "A description propagated to every snapshot specified by the instance.
", - "CreateSnapshotsRequest$OutpostArn": "The Amazon Resource Name (ARN) of the AWS Outpost on which to create the local snapshots.
To create snapshots from an instance in a Region, omit this parameter. The snapshots are created in the same Region as the instance.
To create snapshots from an instance on an Outpost and store the snapshots in the Region, omit this parameter. The snapshots are created in the Region for the Outpost.
To create snapshots from an instance on an Outpost and store the snapshots on an Outpost, specify the ARN of the destination Outpost. The snapshots must be created on the same Outpost as the instance.
For more information, see Creating multi-volume local snapshots from instances on an Outpost in the Amazon Elastic Compute Cloud User Guide.
", + "CreateSnapshotsRequest$OutpostArn": "The Amazon Resource Name (ARN) of the Outpost on which to create the local snapshots.
To create snapshots from an instance in a Region, omit this parameter. The snapshots are created in the same Region as the instance.
To create snapshots from an instance on an Outpost and store the snapshots in the Region, omit this parameter. The snapshots are created in the Region for the Outpost.
To create snapshots from an instance on an Outpost and store the snapshots on an Outpost, specify the ARN of the destination Outpost. The snapshots must be created on the same Outpost as the instance.
For more information, see Create multi-volume local snapshots from instances on an Outpost in the Amazon Elastic Compute Cloud User Guide.
", "CreateSpotDatafeedSubscriptionRequest$Bucket": "The name of the Amazon S3 bucket in which to store the Spot Instance data feed. For more information about bucket names, see Rules for bucket naming in the Amazon S3 Developer Guide.
", "CreateSpotDatafeedSubscriptionRequest$Prefix": "The prefix for the data feed file names.
", "CreateStoreImageTaskRequest$Bucket": "The name of the S3 bucket in which the AMI object will be stored. The bucket must be in the Region in which the request is being made. The AMI object appears in the bucket only after the upload task has completed.
", @@ -14235,9 +14235,10 @@ "CreateTransitGatewayPeeringAttachmentRequest$PeerRegion": "The Region where the peer transit gateway is located.
", "CreateTransitGatewayRequest$Description": "A description of the transit gateway.
", "CreateTransitGatewayRouteRequest$DestinationCidrBlock": "The CIDR range used for destination matches. Routing decisions are based on the most specific match.
", - "CreateVolumePermission$UserId": "The AWS account ID to be added or removed.
", + "CreateVolumePermission$UserId": "The ID of the account to be added or removed.
", "CreateVolumeRequest$AvailabilityZone": "The Availability Zone in which to create the volume.
", "CreateVolumeRequest$OutpostArn": "The Amazon Resource Name (ARN) of the Outpost.
", + "CreateVolumeRequest$ClientToken": "Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see Ensure Idempotency.
", "CreateVpcEndpointConnectionNotificationRequest$ConnectionNotificationArn": "The ARN of the SNS topic for the notifications.
", "CreateVpcEndpointConnectionNotificationRequest$ClientToken": "Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to Ensure Idempotency.
", "CreateVpcEndpointConnectionNotificationResult$ClientToken": "Unique, case-sensitive identifier that you provide to ensure the idempotency of the request.
", @@ -14304,8 +14305,8 @@ "DescribeFastSnapshotRestoreSuccessItem$SnapshotId": "The ID of the snapshot.
", "DescribeFastSnapshotRestoreSuccessItem$AvailabilityZone": "The Availability Zone.
", "DescribeFastSnapshotRestoreSuccessItem$StateTransitionReason": "The reason for the state transition. The possible values are as follows:
Client.UserInitiated - The state successfully transitioned to enabling or disabling.
Client.UserInitiated - Lifecycle state transition - The state successfully transitioned to optimizing, enabled, or disabled.
The ID of the AWS account that enabled fast snapshot restores on the snapshot.
", - "DescribeFastSnapshotRestoreSuccessItem$OwnerAlias": "The AWS owner alias that enabled fast snapshot restores on the snapshot. This is intended for future use.
", + "DescribeFastSnapshotRestoreSuccessItem$OwnerId": "The ID of the account that enabled fast snapshot restores on the snapshot.
", + "DescribeFastSnapshotRestoreSuccessItem$OwnerAlias": "The Amazon Web Services owner alias that enabled fast snapshot restores on the snapshot. This is intended for future use.
", "DescribeFleetError$ErrorCode": "The error code that indicates why the instance could not be launched. For more information about error codes, see Error Codes.
", "DescribeFleetError$ErrorMessage": "The error message that describes why the instance could not be launched. For more information about error messages, see Error Codes.
", "DescribeFleetHistoryRequest$NextToken": "The token for the next set of results.
", @@ -14472,8 +14473,8 @@ "DisableFastSnapshotRestoreSuccessItem$SnapshotId": "The ID of the snapshot.
", "DisableFastSnapshotRestoreSuccessItem$AvailabilityZone": "The Availability Zone.
", "DisableFastSnapshotRestoreSuccessItem$StateTransitionReason": "The reason for the state transition. The possible values are as follows:
Client.UserInitiated - The state successfully transitioned to enabling or disabling.
Client.UserInitiated - Lifecycle state transition - The state successfully transitioned to optimizing, enabled, or disabled.
The ID of the AWS account that enabled fast snapshot restores on the snapshot.
", - "DisableFastSnapshotRestoreSuccessItem$OwnerAlias": "The AWS owner alias that enabled fast snapshot restores on the snapshot. This is intended for future use.
", + "DisableFastSnapshotRestoreSuccessItem$OwnerId": "The ID of the account that enabled fast snapshot restores on the snapshot.
", + "DisableFastSnapshotRestoreSuccessItem$OwnerAlias": "The Amazon Web Services owner alias that enabled fast snapshot restores on the snapshot. This is intended for future use.
", "DisassociateAddressRequest$PublicIp": "[EC2-Classic] The Elastic IP address. Required for EC2-Classic.
", "DisassociateClientVpnTargetNetworkResult$AssociationId": "The ID of the target network association.
", "DisassociateSubnetCidrBlockResult$SubnetId": "The ID of the subnet.
", @@ -14512,8 +14513,8 @@ "EnableFastSnapshotRestoreSuccessItem$SnapshotId": "The ID of the snapshot.
", "EnableFastSnapshotRestoreSuccessItem$AvailabilityZone": "The Availability Zone.
", "EnableFastSnapshotRestoreSuccessItem$StateTransitionReason": "The reason for the state transition. The possible values are as follows:
Client.UserInitiated - The state successfully transitioned to enabling or disabling.
Client.UserInitiated - Lifecycle state transition - The state successfully transitioned to optimizing, enabled, or disabled.
The ID of the AWS account that enabled fast snapshot restores on the snapshot.
", - "EnableFastSnapshotRestoreSuccessItem$OwnerAlias": "The AWS owner alias that enabled fast snapshot restores on the snapshot. This is intended for future use.
", + "EnableFastSnapshotRestoreSuccessItem$OwnerId": "The ID of the account that enabled fast snapshot restores on the snapshot.
", + "EnableFastSnapshotRestoreSuccessItem$OwnerAlias": "The Amazon Web Services owner alias that enabled fast snapshot restores on the snapshot. This is intended for future use.
", "EventInformation$EventDescription": "The description of the event.
", "EventInformation$EventSubType": "The event.
The following are the error events:
iamFleetRoleInvalid - The EC2 Fleet or Spot Fleet did not have the required permissions either to launch or terminate an instance.
spotFleetRequestConfigurationInvalid - The configuration is not valid. For more information, see the description of the event.
spotInstanceCountLimitExceeded - You've reached the limit on the number of Spot Instances that you can launch.
The following are the fleetRequestChange events:
active - The EC2 Fleet or Spot Fleet request has been validated and Amazon EC2 is attempting to maintain the target number of running Spot Instances.
cancelled - The EC2 Fleet or Spot Fleet request is canceled and has no running Spot Instances. The EC2 Fleet or Spot Fleet will be deleted two days after its instances were terminated.
cancelled_running - The EC2 Fleet or Spot Fleet request is canceled and does not launch additional Spot Instances. Existing Spot Instances continue to run until they are interrupted or terminated.
cancelled_terminating - The EC2 Fleet or Spot Fleet request is canceled and its Spot Instances are terminating.
expired - The EC2 Fleet or Spot Fleet request has expired. A subsequent event indicates that the instances were terminated, if the request was created with TerminateInstancesWithExpiration set.
modify_in_progress - A request to modify the EC2 Fleet or Spot Fleet request was accepted and is in progress.
modify_successful - The EC2 Fleet or Spot Fleet request was modified.
price_update - The price for a launch configuration was adjusted because it was too high. This change is permanent.
submitted - The EC2 Fleet or Spot Fleet request is being evaluated and Amazon EC2 is preparing to launch the target number of Spot Instances.
The following are the instanceChange events:
launched - A request was fulfilled and a new instance was launched.
terminated - An instance was terminated by the user.
The following are the Information events:
launchSpecTemporarilyBlacklisted - The configuration is not valid and several attempts to launch instances have failed. For more information, see the description of the event.
launchSpecUnusable - The price in a launch specification is not valid because it is below the Spot price or the Spot price is above the On-Demand price.
fleetProgressHalted - The price in every launch specification is not valid. A launch specification might become valid if the Spot price changes.
The ID of the instance. This information is available only for instanceChange events.
The console output, base64-encoded. If you are using a command line tool, the tool decodes the output for you.
", "GetConsoleScreenshotResult$ImageData": "The data that comprises the image.
", "GetConsoleScreenshotResult$InstanceId": "The ID of the instance.
", - "GetEbsDefaultKmsKeyIdResult$KmsKeyId": "The Amazon Resource Name (ARN) of the default CMK for encryption by default.
", + "GetEbsDefaultKmsKeyIdResult$KmsKeyId": "The Amazon Resource Name (ARN) of the default KMS key for encryption by default.
", "GetFlowLogsIntegrationTemplateRequest$ConfigDeliveryS3DestinationArn": "To store the CloudFormation template in Amazon S3, specify the location in Amazon S3.
", "GetFlowLogsIntegrationTemplateResult$Result": "The generated CloudFormation template.
", "GetGroupsForCapacityReservationRequest$NextToken": "The token to use to retrieve the next page of results.
", @@ -14900,7 +14901,7 @@ "ModifyClientVpnEndpointRequest$ServerCertificateArn": "The ARN of the server certificate to be used. The server certificate must be provisioned in AWS Certificate Manager (ACM).
", "ModifyClientVpnEndpointRequest$Description": "A brief description of the Client VPN endpoint.
", "ModifyDefaultCreditSpecificationRequest$CpuCredits": "The credit option for CPU usage of the instance family.
Valid Values: standard | unlimited
The Amazon Resource Name (ARN) of the default CMK for encryption by default.
", + "ModifyEbsDefaultKmsKeyIdResult$KmsKeyId": "The Amazon Resource Name (ARN) of the default KMS key for encryption by default.
", "ModifyFleetRequest$Context": "Reserved.
", "ModifyFpgaImageAttributeRequest$Description": "A description for the AFI.
", "ModifyFpgaImageAttributeRequest$Name": "A name for the AFI.
", @@ -15137,7 +15138,7 @@ "ReservedInstancesModificationResult$ReservedInstancesId": "The ID for the Reserved Instances that were created as part of the modification request. This field is only available when the modification is fulfilled.
", "ReservedInstancesOffering$AvailabilityZone": "The Availability Zone in which the Reserved Instance can be used.
", "ReservedInstancesOffering$ReservedInstancesOfferingId": "The ID of the Reserved Instance offering. This is the offering ID used in GetReservedInstancesExchangeQuote to confirm that an exchange can be made.
", - "ResetEbsDefaultKmsKeyIdResult$KmsKeyId": "The Amazon Resource Name (ARN) of the default CMK for EBS encryption by default.
", + "ResetEbsDefaultKmsKeyIdResult$KmsKeyId": "The Amazon Resource Name (ARN) of the default KMS key for EBS encryption by default.
", "ResetNetworkInterfaceAttributeRequest$SourceDestCheck": "The source/destination checking attribute. Resets the value to true.
The error message, if applicable.
", @@ -15255,14 +15256,14 @@ "ServiceDetail$PrivateDnsName": "The private DNS name for the service.
", "Snapshot$DataEncryptionKeyId": "The data encryption key identifier for the snapshot. This value is a unique identifier that corresponds to the data encryption key that was used to encrypt the original volume or snapshot copy. Because data encryption keys are inherited by volumes created from snapshots, and vice versa, if snapshots share the same data encryption key identifier, then they belong to the same volume/snapshot lineage. This parameter is only returned by DescribeSnapshots.
", "Snapshot$Description": "The description for the snapshot.
", - "Snapshot$KmsKeyId": "The Amazon Resource Name (ARN) of the AWS Key Management Service (AWS KMS) customer master key (CMK) that was used to protect the volume encryption key for the parent volume.
", - "Snapshot$OwnerId": "The AWS account ID of the EBS snapshot owner.
", + "Snapshot$KmsKeyId": "The Amazon Resource Name (ARN) of the Key Management Service (KMS) KMS key that was used to protect the volume encryption key for the parent volume.
", + "Snapshot$OwnerId": "The ID of the account that owns the EBS snapshot.
", "Snapshot$Progress": "The progress of the snapshot, as a percentage.
", "Snapshot$SnapshotId": "The ID of the snapshot. Each snapshot receives a unique identifier when it is created.
", - "Snapshot$StateMessage": "Encrypted Amazon EBS snapshots are copied asynchronously. If a snapshot copy operation fails (for example, if the proper AWS Key Management Service (AWS KMS) permissions are not obtained) this field displays error state details to help you diagnose why the error occurred. This parameter is only returned by DescribeSnapshots.
", + "Snapshot$StateMessage": "Encrypted Amazon EBS snapshots are copied asynchronously. If a snapshot copy operation fails (for example, if the proper Key Management Service (KMS) permissions are not obtained) this field displays error state details to help you diagnose why the error occurred. This parameter is only returned by DescribeSnapshots.
", "Snapshot$VolumeId": "The ID of the volume that was used to create the snapshot. Snapshots created by the CopySnapshot action have an arbitrary volume ID that should not be used for any purpose.
", - "Snapshot$OwnerAlias": "The AWS owner alias, from an Amazon-maintained list (amazon). This is not the user-configured AWS account alias set using the IAM console.
The ARN of the AWS Outpost on which the snapshot is stored. For more information, see EBS Local Snapshot on Outposts in the Amazon Elastic Compute Cloud User Guide.
", + "Snapshot$OwnerAlias": "The Amazon Web Services owner alias, from an Amazon-maintained list (amazon). This is not the user-configured account alias set using the IAM console.
The ARN of the Outpost on which the snapshot is stored. For more information, see Amazon EBS local snapshots on Outposts in the Amazon Elastic Compute Cloud User Guide.
", "SnapshotDetail$Description": "A description for the snapshot.
", "SnapshotDetail$DeviceName": "The block device mapping for the snapshot.
", "SnapshotDetail$Format": "The format of the disk image from which the snapshot is created.
", @@ -15279,7 +15280,7 @@ "SnapshotInfo$Progress": "Progress this snapshot has made towards completing.
", "SnapshotInfo$OwnerId": "Account id used when creating this snapshot.
", "SnapshotInfo$SnapshotId": "Snapshot id that can be used to describe this snapshot.
", - "SnapshotInfo$OutpostArn": "The ARN of the AWS Outpost on which the snapshot is stored. For more information, see EBS Local Snapshot on Outposts in the Amazon Elastic Compute Cloud User Guide.
", + "SnapshotInfo$OutpostArn": "The ARN of the Outpost on which the snapshot is stored. For more information, see Amazon EBS local snapshots on Outposts in the Amazon Elastic Compute Cloud User Guide.
", "SnapshotTaskDetail$Description": "The description of the snapshot.
", "SnapshotTaskDetail$Format": "The format of the disk image from which the snapshot is created.
", "SnapshotTaskDetail$KmsKeyId": "The identifier for the AWS Key Management Service (AWS KMS) customer master key (CMK) that was used to create the encrypted snapshot.
", @@ -15484,7 +15485,7 @@ "VgwTelemetry$StatusMessage": "If an error occurs, a description of the error.
", "VgwTelemetry$CertificateArn": "The Amazon Resource Name (ARN) of the VPN tunnel endpoint certificate.
", "Volume$AvailabilityZone": "The Availability Zone for the volume.
", - "Volume$KmsKeyId": "The Amazon Resource Name (ARN) of the AWS Key Management Service (AWS KMS) customer master key (CMK) that was used to protect the volume encryption key for the volume.
", + "Volume$KmsKeyId": "The Amazon Resource Name (ARN) of the Key Management Service (KMS) KMS key that was used to protect the volume encryption key for the volume.
", "Volume$OutpostArn": "The Amazon Resource Name (ARN) of the Outpost.
", "Volume$SnapshotId": "The snapshot from which the volume was created, if applicable.
", "Volume$VolumeId": "The ID of the volume.
", @@ -17220,7 +17221,7 @@ "base": null, "refs": { "AttachVolumeRequest$VolumeId": "The ID of the EBS volume. The volume and instance must be within the same Availability Zone.
", - "CreateSnapshotRequest$VolumeId": "The ID of the EBS volume.
", + "CreateSnapshotRequest$VolumeId": "The ID of the Amazon EBS volume.
", "DeleteVolumeRequest$VolumeId": "The ID of the volume.
", "DescribeVolumeAttributeRequest$VolumeId": "The ID of the volume.
", "DetachVolumeRequest$VolumeId": "The ID of the volume.
", @@ -17355,7 +17356,7 @@ "EbsBlockDevice$VolumeType": "The volume type. For more information, see Amazon EBS volume types in the Amazon EC2 User Guide. If the volume type is io1 or io2, you must specify the IOPS that the volume supports.
The volume type.
", "LaunchTemplateEbsBlockDeviceRequest$VolumeType": "The volume type. For more information, see Amazon EBS volume types in the Amazon Elastic Compute Cloud User Guide.
", - "ModifyVolumeRequest$VolumeType": "The target EBS volume type of the volume. For more information, see Amazon EBS volume types in the Amazon Elastic Compute Cloud User Guide.
Default: If no type is specified, the existing type is retained.
", + "ModifyVolumeRequest$VolumeType": "The target EBS volume type of the volume. For more information, see Amazon EBS volume types in the Amazon Elastic Compute Cloud User Guide.
Default: The existing type is retained.
", "Volume$VolumeType": "The volume type.
", "VolumeModification$TargetVolumeType": "The target EBS volume type of the volume.
", "VolumeModification$OriginalVolumeType": "The original EBS volume type of the volume.
" diff --git a/service/computeoptimizer/api.go b/service/computeoptimizer/api.go index 4d9f480804..b987d6aec3 100644 --- a/service/computeoptimizer/api.go +++ b/service/computeoptimizer/api.go @@ -1637,10 +1637,10 @@ type AutoScalingGroupRecommendationOption struct { // recommended instance is calculated as the maximum performance risk score // across the analyzed resource specifications. // - // The value ranges from 0 to 5, with 0 meaning that the recommended resource + // The value ranges from 0 - 4, with 0 meaning that the recommended resource // is predicted to always provide enough hardware capability. The higher the - // performance risk is, the more likely you should validate whether the recommended - // resource meets the performance requirements of your workload before migrating + // performance risk is, the more likely you should validate whether the recommendation + // will meet the performance requirements of your workload before migrating // your resource. PerformanceRisk *float64 `locationName:"performanceRisk" type:"double"` @@ -3714,7 +3714,7 @@ type InstanceRecommendationOption struct { // recommended instance is calculated as the maximum performance risk score // across the analyzed resource specifications. // - // The value ranges from 0 to 5, with 0 meaning that the recommended resource + // The value ranges from 0 - 4, with 0 meaning that the recommended resource // is predicted to always provide enough hardware capability. The higher the // performance risk is, the more likely you should validate whether the recommendation // will meet the performance requirements of your workload before migrating @@ -5579,7 +5579,7 @@ type VolumeRecommendationOption struct { // Performance risk is the likelihood of the recommended volume type meeting // the performance requirement of your workload. // - // The value ranges from 0 to 5, with 0 meaning that the recommended resource + // The value ranges from 0 - 4, with 0 meaning that the recommended resource // is predicted to always provide enough hardware capability. The higher the // performance risk is, the more likely you should validate whether the recommendation // will meet the performance requirements of your workload before migrating diff --git a/service/ec2/api.go b/service/ec2/api.go index a6e0f4dcea..45fe3a63bf 100644 --- a/service/ec2/api.go +++ b/service/ec2/api.go @@ -2279,13 +2279,13 @@ func (c *EC2) AttachVolumeRequest(input *AttachVolumeInput) (req *request.Reques // in the Amazon Elastic Compute Cloud User Guide. // // After you attach an EBS volume, you must make it available. For more information, -// see Making an EBS volume available for use (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-using-volumes.html). +// see Make an EBS volume available for use (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-using-volumes.html). // -// If a volume has an AWS Marketplace product code: +// If a volume has an Marketplace product code: // // * The volume can be attached only to a stopped instance. // -// * AWS Marketplace product codes are copied from the volume to the instance. +// * Marketplace product codes are copied from the volume to the instance. // // * You must be subscribed to the product. // @@ -2293,7 +2293,7 @@ func (c *EC2) AttachVolumeRequest(input *AttachVolumeInput) (req *request.Reques // the product. For example, you can't detach a volume from a Windows instance // and attach it to a Linux instance. // -// For more information, see Attaching Amazon EBS volumes (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-attaching-volume.html) +// For more information, see Attach an Amazon EBS volume to an instance (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-attaching-volume.html) // in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -3663,10 +3663,10 @@ func (c *EC2) CopySnapshotRequest(input *CopySnapshotInput) (req *request.Reques // When copying snapshots to a Region, copies of encrypted EBS snapshots remain // encrypted. Copies of unencrypted snapshots remain unencrypted, unless you // enable encryption for the snapshot copy operation. By default, encrypted -// snapshot copies use the default AWS Key Management Service (AWS KMS) customer -// master key (CMK); however, you can specify a different CMK. To copy an encrypted -// snapshot that has been shared from another account, you must have permissions -// for the CMK used to encrypt the snapshot. +// snapshot copies use the default Key Management Service (KMS) KMS key; however, +// you can specify a different KMS key. To copy an encrypted snapshot that has +// been shared from another account, you must have permissions for the KMS key +// used to encrypt the snapshot. // // Snapshots copied to an Outpost are encrypted by default using the default // encryption key for the Region, or a different key that you specify in the @@ -3677,7 +3677,7 @@ func (c *EC2) CopySnapshotRequest(input *CopySnapshotInput) (req *request.Reques // Snapshots created by copying another snapshot have an arbitrary volume ID // that should not be used for any purpose. // -// For more information, see Copying an Amazon EBS snapshot (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-copy-snapshot.html) +// For more information, see Copy an Amazon EBS snapshot (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-copy-snapshot.html) // in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -6174,7 +6174,7 @@ func (c *EC2) CreateReplaceRootVolumeTaskRequest(input *CreateReplaceRootVolumeT // volume can either be restored to its initial launch state, or it can be restored // using a specific snapshot. // -// For more information, see Replace a root volume (https://docs.aws.amazon.com/) +// For more information, see Replace a root volume (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-restoring-volume.html#replace-root) // in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -6707,28 +6707,29 @@ func (c *EC2) CreateSnapshotRequest(input *CreateSnapshotInput) (req *request.Re // an Outpost, the snapshot can be stored on the same Outpost as the volume, // or in the Region for that Outpost. // -// When a snapshot is created, any AWS Marketplace product codes that are associated +// When a snapshot is created, any Marketplace product codes that are associated // with the source volume are propagated to the snapshot. // // You can take a snapshot of an attached volume that is in use. However, snapshots -// only capture data that has been written to your EBS volume at the time the -// snapshot command is issued; this might exclude any data that has been cached -// by any applications or the operating system. If you can pause any file systems -// on the volume long enough to take a snapshot, your snapshot should be complete. -// However, if you cannot pause all file writes to the volume, you should unmount -// the volume from within the instance, issue the snapshot command, and then -// remount the volume to ensure a consistent and complete snapshot. You may -// remount and use your volume while the snapshot status is pending. -// -// To create a snapshot for EBS volumes that serve as root devices, you should -// stop the instance before taking the snapshot. +// only capture data that has been written to your Amazon EBS volume at the +// time the snapshot command is issued; this might exclude any data that has +// been cached by any applications or the operating system. If you can pause +// any file systems on the volume long enough to take a snapshot, your snapshot +// should be complete. However, if you cannot pause all file writes to the volume, +// you should unmount the volume from within the instance, issue the snapshot +// command, and then remount the volume to ensure a consistent and complete +// snapshot. You may remount and use your volume while the snapshot status is +// pending. +// +// To create a snapshot for Amazon EBS volumes that serve as root devices, you +// should stop the instance before taking the snapshot. // // Snapshots that are taken from encrypted volumes are automatically encrypted. // Volumes that are created from encrypted snapshots are also automatically // encrypted. Your encrypted volumes and any associated snapshots always remain // protected. // -// You can tag your snapshots during creation. For more information, see Tagging +// You can tag your snapshots during creation. For more information, see Tag // your Amazon EC2 resources (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html) // in the Amazon Elastic Compute Cloud User Guide. // @@ -8277,8 +8278,7 @@ func (c *EC2) CreateVolumeRequest(input *CreateVolumeInput) (req *request.Reques // Zone. // // You can create a new empty volume or restore a volume from an EBS snapshot. -// Any AWS Marketplace product codes from the snapshot are propagated to the -// volume. +// Any Marketplace product codes from the snapshot are propagated to the volume. // // You can create encrypted volumes. Encrypted volumes must be attached to instances // that support Amazon EBS encryption. Volumes that are created from encrypted @@ -8286,11 +8286,11 @@ func (c *EC2) CreateVolumeRequest(input *CreateVolumeInput) (req *request.Reques // EBS encryption (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) // in the Amazon Elastic Compute Cloud User Guide. // -// You can tag your volumes during creation. For more information, see Tagging -// your Amazon EC2 resources (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html) +// You can tag your volumes during creation. For more information, see Tag your +// Amazon EC2 resources (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html) // in the Amazon Elastic Compute Cloud User Guide. // -// For more information, see Creating an Amazon EBS volume (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-creating-volume.html) +// For more information, see Create an Amazon EBS volume (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-creating-volume.html) // in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -11301,7 +11301,7 @@ func (c *EC2) DeleteSnapshotRequest(input *DeleteSnapshotInput) (req *request.Re // a registered AMI. You must first de-register the AMI before you can delete // the snapshot. // -// For more information, see Deleting an Amazon EBS snapshot (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-deleting-snapshot.html) +// For more information, see Delete an Amazon EBS snapshot (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-deleting-snapshot.html) // in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -12584,7 +12584,7 @@ func (c *EC2) DeleteVolumeRequest(input *DeleteVolumeInput) (req *request.Reques // // The volume can remain in the deleting state for several minutes. // -// For more information, see Deleting an Amazon EBS volume (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-deleting-volume.html) +// For more information, see Delete an Amazon EBS volume (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-deleting-volume.html) // in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -22335,8 +22335,8 @@ func (c *EC2) DescribeReplaceRootVolumeTasksRequest(input *DescribeReplaceRootVo // DescribeReplaceRootVolumeTasks API operation for Amazon Elastic Compute Cloud. // // Describes a root volume replacement task. For more information, see Replace -// a root volume (https://docs.aws.amazon.com/) in the Amazon Elastic Compute -// Cloud User Guide. +// a root volume (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-restoring-volume.html#replace-root) +// in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about @@ -23761,23 +23761,23 @@ func (c *EC2) DescribeSnapshotsRequest(input *DescribeSnapshotsInput) (req *requ // snapshots available to you. // // The snapshots available to you include public snapshots, private snapshots -// that you own, and private snapshots owned by other AWS accounts for which -// you have explicit create volume permissions. +// that you own, and private snapshots owned by other accounts for which you +// have explicit create volume permissions. // // The create volume permissions fall into the following categories: // // * public: The owner of the snapshot granted create volume permissions -// for the snapshot to the all group. All AWS accounts have create volume -// permissions for these snapshots. +// for the snapshot to the all group. All accounts have create volume permissions +// for these snapshots. // // * explicit: The owner of the snapshot granted create volume permissions -// to a specific AWS account. +// to a specific account. // -// * implicit: An AWS account has implicit create volume permissions for -// all snapshots it owns. +// * implicit: An account has implicit create volume permissions for all +// snapshots it owns. // // The list of snapshots returned can be filtered by specifying snapshot IDs, -// snapshot owners, or AWS accounts with create volume permissions. If no options +// snapshot owners, or accounts with create volume permissions. If no options // are specified, Amazon EC2 returns all snapshots for which you have create // volume permissions. // @@ -23788,13 +23788,13 @@ func (c *EC2) DescribeSnapshotsRequest(input *DescribeSnapshotsInput) (req *requ // // If you specify one or more snapshot owners using the OwnerIds option, only // snapshots from the specified owners and for which you have access are returned. -// The results can include the AWS account IDs of the specified owners, amazon -// for snapshots owned by Amazon, or self for snapshots that you own. +// The results can include the account IDs of the specified owners, amazon for +// snapshots owned by Amazon, or self for snapshots that you own. // // If you specify a list of restorable users, only snapshots with create snapshot -// permissions for those users are returned. You can specify AWS account IDs -// (if you own the snapshots), self for snapshots for which you own or have -// explicit permissions, or all for public snapshots. +// permissions for those users are returned. You can specify account IDs (if +// you own the snapshots), self for snapshots for which you own or have explicit +// permissions, or all for public snapshots. // // If you are describing a long list of snapshots, we recommend that you paginate // the output to make the list more manageable. The MaxResults parameter sets @@ -26770,7 +26770,7 @@ func (c *EC2) DescribeVolumeStatusRequest(input *DescribeVolumeStatusInput) (req // status of the volume is ok. If the check fails, the overall status is impaired. // If the status is insufficient-data, then the checks might still be taking // place on your volume at the time. We recommend that you retry the request. -// For more information about volume status, see Monitoring the status of your +// For more information about volume status, see Monitor the status of your // volumes (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/monitoring-volume-status.html) // in the Amazon Elastic Compute Cloud User Guide. // @@ -27072,7 +27072,7 @@ func (c *EC2) DescribeVolumesModificationsRequest(input *DescribeVolumesModifica // You can also use CloudWatch Events to check the status of a modification // to an EBS volume. For information about CloudWatch Events, see the Amazon // CloudWatch Events User Guide (https://docs.aws.amazon.com/AmazonCloudWatch/latest/events/). -// For more information, see Monitoring volume modifications (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-expand-volume.html#monitoring_mods) +// For more information, see Monitor the progress of volume modifications (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/monitoring-volume-modifications.html) // in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -28885,10 +28885,10 @@ func (c *EC2) DetachVolumeRequest(input *DetachVolumeInput) (req *request.Reques // while the instance is running. To detach the root volume, stop the instance // first. // -// When a volume with an AWS Marketplace product code is detached from an instance, +// When a volume with an Marketplace product code is detached from an instance, // the product code is no longer associated with the instance. // -// For more information, see Detaching an Amazon EBS volume (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-detaching-volume.html) +// For more information, see Detach an Amazon EBS volume (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-detaching-volume.html) // in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -30525,12 +30525,12 @@ func (c *EC2) EnableEbsEncryptionByDefaultRequest(input *EnableEbsEncryptionByDe // Enables EBS encryption by default for your account in the current Region. // // After you enable encryption by default, the EBS volumes that you create are -// always encrypted, either using the default CMK or the CMK that you specified -// when you created each volume. For more information, see Amazon EBS encryption -// (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) +// always encrypted, either using the default KMS key or the KMS key that you +// specified when you created each volume. For more information, see Amazon +// EBS encryption (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) // in the Amazon Elastic Compute Cloud User Guide. // -// You can specify the default CMK for encryption by default using ModifyEbsDefaultKmsKeyId +// You can specify the default KMS key for encryption by default using ModifyEbsDefaultKmsKeyId // or ResetEbsDefaultKmsKeyId. // // Enabling encryption by default has no effect on the encryption status of @@ -32153,9 +32153,9 @@ func (c *EC2) GetEbsDefaultKmsKeyIdRequest(input *GetEbsDefaultKmsKeyIdInput) (r // GetEbsDefaultKmsKeyId API operation for Amazon Elastic Compute Cloud. // -// Describes the default customer master key (CMK) for EBS encryption by default -// for your account in this Region. You can change the default CMK for encryption -// by default using ModifyEbsDefaultKmsKeyId or ResetEbsDefaultKmsKeyId. +// Describes the default KMS key for EBS encryption by default for your account +// in this Region. You can change the default KMS key for encryption by default +// using ModifyEbsDefaultKmsKeyId or ResetEbsDefaultKmsKeyId. // // For more information, see Amazon EBS encryption (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) // in the Amazon Elastic Compute Cloud User Guide. @@ -34748,17 +34748,18 @@ func (c *EC2) ModifyEbsDefaultKmsKeyIdRequest(input *ModifyEbsDefaultKmsKeyIdInp // ModifyEbsDefaultKmsKeyId API operation for Amazon Elastic Compute Cloud. // -// Changes the default customer master key (CMK) for EBS encryption by default -// for your account in this Region. +// Changes the default KMS key for EBS encryption by default for your account +// in this Region. // -// AWS creates a unique AWS managed CMK in each Region for use with encryption -// by default. If you change the default CMK to a symmetric customer managed -// CMK, it is used instead of the AWS managed CMK. To reset the default CMK -// to the AWS managed CMK for EBS, use ResetEbsDefaultKmsKeyId. Amazon EBS does -// not support asymmetric CMKs. +// Amazon Web Services creates a unique Amazon Web Services managed KMS key +// in each Region for use with encryption by default. If you change the default +// KMS key to a symmetric customer managed KMS key, it is used instead of the +// Amazon Web Services managed KMS key. To reset the default KMS key to the +// Amazon Web Services managed KMS key for EBS, use ResetEbsDefaultKmsKeyId. +// Amazon EBS does not support asymmetric KMS keys. // -// If you delete or disable the customer managed CMK that you specified for -// use with encryption by default, your instances will fail to launch. +// If you delete or disable the customer managed KMS key that you specified +// for use with encryption by default, your instances will fail to launch. // // For more information, see Amazon EBS encryption (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) // in the Amazon Elastic Compute Cloud User Guide. @@ -36340,16 +36341,16 @@ func (c *EC2) ModifySnapshotAttributeRequest(input *ModifySnapshotAttributeInput // ModifySnapshotAttribute API operation for Amazon Elastic Compute Cloud. // // Adds or removes permission settings for the specified snapshot. You may add -// or remove specified AWS account IDs from a snapshot's list of create volume -// permissions, but you cannot do both in a single operation. If you need to -// both add and remove account IDs for a snapshot, you must use multiple operations. -// You can make up to 500 modifications to a snapshot in a single operation. +// or remove specified account IDs from a snapshot's list of create volume permissions, +// but you cannot do both in a single operation. If you need to both add and +// remove account IDs for a snapshot, you must use multiple operations. You +// can make up to 500 modifications to a snapshot in a single operation. // -// Encrypted snapshots and snapshots with AWS Marketplace product codes cannot -// be made public. Snapshots encrypted with your default CMK cannot be shared +// Encrypted snapshots and snapshots with Marketplace product codes cannot be +// made public. Snapshots encrypted with your default KMS key cannot be shared // with other accounts. // -// For more information about modifying snapshot permissions, see Sharing snapshots +// For more information about modifying snapshot permissions, see Share a snapshot // (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-modifying-snapshot-permissions.html) // in the Amazon Elastic Compute Cloud User Guide. // @@ -37067,34 +37068,28 @@ func (c *EC2) ModifyVolumeRequest(input *ModifyVolumeInput) (req *request.Reques // size, volume type, and IOPS capacity. If your EBS volume is attached to a // current-generation EC2 instance type, you might be able to apply these changes // without stopping the instance or detaching the volume from it. For more information -// about modifying an EBS volume running Linux, see Modifying the size, IOPS, -// or type of an EBS volume on Linux (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-expand-volume.html). -// For more information about modifying an EBS volume running Windows, see Modifying -// the size, IOPS, or type of an EBS volume on Windows (https://docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/ebs-expand-volume.html). +// about modifying EBS volumes, see Amazon EBS Elastic Volumes (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-modify-volume.html) +// (Linux instances) or Amazon EBS Elastic Volumes (https://docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/ebs-modify-volume.html) +// (Windows instances). // // When you complete a resize operation on your volume, you need to extend the // volume's file-system size to take advantage of the new storage capacity. -// For information about extending a Linux file system, see Extending a Linux -// file system (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-expand-volume.html#recognize-expanded-volume-linux). -// For information about extending a Windows file system, see Extending a Windows -// file system (https://docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/ebs-expand-volume.html#recognize-expanded-volume-windows). +// For more information, see Extend a Linux file system (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-expand-volume.html#recognize-expanded-volume-linux) +// or Extend a Windows file system (https://docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/ebs-expand-volume.html#recognize-expanded-volume-windows). // // You can use CloudWatch Events to check the status of a modification to an // EBS volume. For information about CloudWatch Events, see the Amazon CloudWatch // Events User Guide (https://docs.aws.amazon.com/AmazonCloudWatch/latest/events/). // You can also track the status of a modification using DescribeVolumesModifications. -// For information about tracking status changes using either method, see Monitoring -// volume modifications (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-expand-volume.html#monitoring_mods). +// For information about tracking status changes using either method, see Monitor +// the progress of volume modifications (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/monitoring-volume-modifications.html). // // With previous-generation instance types, resizing an EBS volume might require // detaching and reattaching the volume or stopping and restarting the instance. -// For more information, see Amazon EBS Elastic Volumes (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-modify-volume.html) -// (Linux) or Amazon EBS Elastic Volumes (https://docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/ebs-modify-volume.html) -// (Windows). // -// If you reach the maximum volume modification rate per volume limit, you will -// need to wait at least six hours before applying further modifications to -// the affected EBS volume. +// If you reach the maximum volume modification rate per volume limit, you must +// wait at least six hours before applying further modifications to the affected +// EBS volume. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions // with awserr.Error's Code and Message methods to get detailed information about @@ -40473,12 +40468,13 @@ func (c *EC2) ResetEbsDefaultKmsKeyIdRequest(input *ResetEbsDefaultKmsKeyIdInput // ResetEbsDefaultKmsKeyId API operation for Amazon Elastic Compute Cloud. // -// Resets the default customer master key (CMK) for EBS encryption for your -// account in this Region to the AWS managed CMK for EBS. +// Resets the default KMS key for EBS encryption for your account in this Region +// to the Amazon Web Services managed KMS key for EBS. // -// After resetting the default CMK to the AWS managed CMK, you can continue -// to encrypt by a customer managed CMK by specifying it when you create the -// volume. For more information, see Amazon EBS encryption (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) +// After resetting the default KMS key to the Amazon Web Services managed KMS +// key, you can continue to encrypt by a customer managed KMS key by specifying +// it when you create the volume. For more information, see Amazon EBS encryption +// (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) // in the Amazon Elastic Compute Cloud User Guide. // // Returns awserr.Error for service API and SDK errors. Use runtime type assertions @@ -40867,7 +40863,7 @@ func (c *EC2) ResetSnapshotAttributeRequest(input *ResetSnapshotAttributeInput) // // Resets permission settings for the specified snapshot. // -// For more information about modifying snapshot permissions, see Sharing snapshots +// For more information about modifying snapshot permissions, see Share a snapshot // (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-modifying-snapshot-permissions.html) // in the Amazon Elastic Compute Cloud User Guide. // @@ -51276,13 +51272,13 @@ type CopySnapshotInput struct { Description *string `type:"string"` // The Amazon Resource Name (ARN) of the Outpost to which to copy the snapshot. - // Only specify this parameter when copying a snapshot from an AWS Region to - // an Outpost. The snapshot must be in the Region for the destination Outpost. - // You cannot copy a snapshot from an Outpost to a Region, from one Outpost - // to another, or within the same Outpost. + // Only specify this parameter when copying a snapshot from an Amazon Web Services + // Region to an Outpost. The snapshot must be in the Region for the destination + // Outpost. You cannot copy a snapshot from an Outpost to a Region, from one + // Outpost to another, or within the same Outpost. // - // For more information, see Copying snapshots from an AWS Region to an Outpost - // (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/snapshots-outposts.html#copy-snapshots) + // For more information, see Copy snapshots from an Amazon Web Services Region + // to an Outpost (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/snapshots-outposts.html#copy-snapshots) // in the Amazon Elastic Compute Cloud User Guide. DestinationOutpostArn *string `type:"string"` @@ -51291,9 +51287,9 @@ type CopySnapshotInput struct { // Region in a PresignedUrl parameter, where it is required. // // The snapshot copy is sent to the regional endpoint that you sent the HTTP - // request to (for example, ec2.us-east-1.amazonaws.com). With the AWS CLI, - // this is specified using the --region parameter or the default Region in your - // AWS configuration file. + // request to (for example, ec2.us-east-1.amazonaws.com). With the CLI, this + // is specified using the --region parameter or the default Region in your Amazon + // Web Services configuration file. DestinationRegion *string `locationName:"destinationRegion" type:"string"` // Checks whether you have the required permissions for the action, without @@ -51310,12 +51306,11 @@ type CopySnapshotInput struct { // in the Amazon Elastic Compute Cloud User Guide. Encrypted *bool `locationName:"encrypted" type:"boolean"` - // The identifier of the AWS Key Management Service (AWS KMS) customer master - // key (CMK) to use for Amazon EBS encryption. If this parameter is not specified, - // your AWS managed CMK for EBS is used. If KmsKeyId is specified, the encrypted - // state must be true. + // The identifier of the Key Management Service (KMS) KMS key to use for Amazon + // EBS encryption. If this parameter is not specified, your KMS key for Amazon + // EBS is used. If KmsKeyId is specified, the encrypted state must be true. // - // You can specify the CMK using any of the following: + // You can specify the KMS key using any of the following: // // * Key ID. For example, 1234abcd-12ab-34cd-56ef-1234567890ab. // @@ -51325,9 +51320,9 @@ type CopySnapshotInput struct { // // * Alias ARN. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias. // - // AWS authenticates the CMK asynchronously. Therefore, if you specify an ID, - // alias, or ARN that is not valid, the action can appear to complete, but eventually - // fails. + // Amazon Web Services authenticates the KMS key asynchronously. Therefore, + // if you specify an ID, alias, or ARN that is not valid, the action can appear + // to complete, but eventually fails. KmsKeyId *string `locationName:"kmsKeyId" type:"string"` // When you copy an encrypted source snapshot using the Amazon EC2 Query API, @@ -51336,10 +51331,11 @@ type CopySnapshotInput struct { // // The PresignedUrl should use the snapshot source endpoint, the CopySnapshot // action, and include the SourceRegion, SourceSnapshotId, and DestinationRegion - // parameters. The PresignedUrl must be signed using AWS Signature Version 4. - // Because EBS snapshots are stored in Amazon S3, the signing algorithm for - // this parameter uses the same logic that is described in Authenticating Requests: - // Using Query Parameters (AWS Signature Version 4) (https://docs.aws.amazon.com/AmazonS3/latest/API/sigv4-query-string-auth.html) + // parameters. The PresignedUrl must be signed using Amazon Web Services Signature + // Version 4. Because EBS snapshots are stored in Amazon S3, the signing algorithm + // for this parameter uses the same logic that is described in Authenticating + // Requests: Using Query Parameters (Amazon Web Services Signature Version 4) + // (https://docs.aws.amazon.com/AmazonS3/latest/API/sigv4-query-string-auth.html) // in the Amazon Simple Storage Service API Reference. An invalid or improperly // signed PresignedUrl will cause the copy operation to fail asynchronously, // and the snapshot will move to an error state. @@ -55558,7 +55554,7 @@ type CreateReplaceRootVolumeTaskInput struct { // Unique, case-sensitive identifier you provide to ensure the idempotency of // the request. If you do not specify a client token, a randomly generated token // is used for the request to ensure idempotency. For more information, see - // Ensuring Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + // Ensuring idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). ClientToken *string `type:"string" idempotencyToken:"true"` // Checks whether you have the required permissions for the action, without @@ -56300,7 +56296,7 @@ type CreateSnapshotInput struct { // it is UnauthorizedOperation. DryRun *bool `locationName:"dryRun" type:"boolean"` - // The Amazon Resource Name (ARN) of the AWS Outpost on which to create a local + // The Amazon Resource Name (ARN) of the Outpost on which to create a local // snapshot. // // * To create a snapshot of a volume in a Region, omit this parameter. The @@ -56314,7 +56310,7 @@ type CreateSnapshotInput struct { // on an Outpost, specify the ARN of the destination Outpost. The snapshot // must be created on the same Outpost as the volume. // - // For more information, see Creating local snapshots from volumes on an Outpost + // For more information, see Create local snapshots from volumes on an Outpost // (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/snapshots-outposts.html#create-snapshot) // in the Amazon Elastic Compute Cloud User Guide. OutpostArn *string `type:"string"` @@ -56322,7 +56318,7 @@ type CreateSnapshotInput struct { // The tags to apply to the snapshot during creation. TagSpecifications []*TagSpecification `locationName:"TagSpecification" locationNameList:"item" type:"list"` - // The ID of the EBS volume. + // The ID of the Amazon EBS volume. // // VolumeId is a required field VolumeId *string `type:"string" required:"true"` @@ -56401,8 +56397,8 @@ type CreateSnapshotsInput struct { // InstanceSpecification is a required field InstanceSpecification *InstanceSpecification `type:"structure" required:"true"` - // The Amazon Resource Name (ARN) of the AWS Outpost on which to create the - // local snapshots. + // The Amazon Resource Name (ARN) of the Outpost on which to create the local + // snapshots. // // * To create snapshots from an instance in a Region, omit this parameter. // The snapshots are created in the same Region as the instance. @@ -56415,7 +56411,7 @@ type CreateSnapshotsInput struct { // on an Outpost, specify the ARN of the destination Outpost. The snapshots // must be created on the same Outpost as the instance. // - // For more information, see Creating multi-volume local snapshots from instances + // For more information, see Create multi-volume local snapshots from instances // on an Outpost (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/snapshots-outposts.html#create-multivol-snapshot) // in the Amazon Elastic Compute Cloud User Guide. OutpostArn *string `type:"string"` @@ -58583,6 +58579,10 @@ type CreateVolumeInput struct { // AvailabilityZone is a required field AvailabilityZone *string `type:"string" required:"true"` + // Unique, case-sensitive identifier that you provide to ensure the idempotency + // of the request. For more information, see Ensure Idempotency (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html). + ClientToken *string `type:"string" idempotencyToken:"true"` + // Checks whether you have the required permissions for the action, without // actually making the request, and provides an error response. If you have // the required permissions, the error response is DryRunOperation. Otherwise, @@ -58612,21 +58612,20 @@ type CreateVolumeInput struct { // // * io2: 100-64,000 IOPS // - // For io1 and io2 volumes, we guarantee 64,000 IOPS only for Instances built - // on the Nitro System (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html#ec2-nitro-instances). - // Other instance families guarantee performance up to 32,000 IOPS. + // io1 and io2 volumes support up to 64,000 IOPS only on Instances built on + // the Nitro System (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html#ec2-nitro-instances). + // Other instance families support performance up to 32,000 IOPS. // // This parameter is required for io1 and io2 volumes. The default for gp3 volumes // is 3,000 IOPS. This parameter is not supported for gp2, st1, sc1, or standard // volumes. Iops *int64 `type:"integer"` - // The identifier of the AWS Key Management Service (AWS KMS) customer master - // key (CMK) to use for Amazon EBS encryption. If this parameter is not specified, - // your AWS managed CMK for EBS is used. If KmsKeyId is specified, the encrypted - // state must be true. + // The identifier of the Key Management Service (KMS) KMS key to use for Amazon + // EBS encryption. If this parameter is not specified, your KMS key for Amazon + // EBS is used. If KmsKeyId is specified, the encrypted state must be true. // - // You can specify the CMK using any of the following: + // You can specify the KMS key using any of the following: // // * Key ID. For example, 1234abcd-12ab-34cd-56ef-1234567890ab. // @@ -58636,9 +58635,9 @@ type CreateVolumeInput struct { // // * Alias ARN. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias. // - // AWS authenticates the CMK asynchronously. Therefore, if you specify an ID, - // alias, or ARN that is not valid, the action can appear to complete, but eventually - // fails. + // Amazon Web Services authenticates the KMS key asynchronously. Therefore, + // if you specify an ID, alias, or ARN that is not valid, the action can appear + // to complete, but eventually fails. KmsKeyId *string `type:"string"` // Indicates whether to enable Amazon EBS Multi-Attach. If you enable Multi-Attach, @@ -58730,6 +58729,12 @@ func (s *CreateVolumeInput) SetAvailabilityZone(v string) *CreateVolumeInput { return s } +// SetClientToken sets the ClientToken field's value. +func (s *CreateVolumeInput) SetClientToken(v string) *CreateVolumeInput { + s.ClientToken = &v + return s +} + // SetDryRun sets the DryRun field's value. func (s *CreateVolumeInput) SetDryRun(v bool) *CreateVolumeInput { s.DryRun = &v @@ -58804,7 +58809,7 @@ type CreateVolumePermission struct { // The group to be added or removed. The possible value is all. Group *string `locationName:"group" type:"string" enum:"PermissionGroup"` - // The AWS account ID to be added or removed. + // The ID of the account to be added or removed. UserId *string `locationName:"userId" type:"string"` } @@ -58834,10 +58839,10 @@ func (s *CreateVolumePermission) SetUserId(v string) *CreateVolumePermission { type CreateVolumePermissionModifications struct { _ struct{} `type:"structure"` - // Adds the specified AWS account ID or group to the list. + // Adds the specified account ID or group to the list. Add []*CreateVolumePermission `locationNameList:"item" type:"list"` - // Removes the specified AWS account ID or group from the list. + // Removes the specified account ID or group from the list. Remove []*CreateVolumePermission `locationNameList:"item" type:"list"` } @@ -67194,11 +67199,11 @@ type DescribeFastSnapshotRestoreSuccessItem struct { // The time at which fast snapshot restores entered the optimizing state. OptimizingTime *time.Time `locationName:"optimizingTime" type:"timestamp"` - // The AWS owner alias that enabled fast snapshot restores on the snapshot. - // This is intended for future use. + // The Amazon Web Services owner alias that enabled fast snapshot restores on + // the snapshot. This is intended for future use. OwnerAlias *string `locationName:"ownerAlias" type:"string"` - // The ID of the AWS account that enabled fast snapshot restores on the snapshot. + // The ID of the account that enabled fast snapshot restores on the snapshot. OwnerId *string `locationName:"ownerId" type:"string"` // The ID of the snapshot. @@ -67306,8 +67311,8 @@ type DescribeFastSnapshotRestoresInput struct { // // * availability-zone: The Availability Zone of the snapshot. // - // * owner-id: The ID of the AWS account that enabled fast snapshot restore - // on the snapshot. + // * owner-id: The ID of the account that enabled fast snapshot restore on + // the snapshot. // // * snapshot-id: The ID of the snapshot. // @@ -75504,11 +75509,11 @@ type DescribeSnapshotsInput struct { // * encrypted - Indicates whether the snapshot is encrypted (true | false) // // * owner-alias - The owner alias, from an Amazon-maintained list (amazon). - // This is not the user-configured AWS account alias set using the IAM console. + // This is not the user-configured account alias set using the IAM console. // We recommend that you use the related parameter instead of this filter. // - // * owner-id - The AWS account ID of the owner. We recommend that you use - // the related parameter instead of this filter. + // * owner-id - The account ID of the owner. We recommend that you use the + // related parameter instead of this filter. // // * progress - The progress of the snapshot, as a percentage (for example, // 80%). @@ -75553,10 +75558,10 @@ type DescribeSnapshotsInput struct { NextToken *string `type:"string"` // Scopes the results to snapshots with the specified owners. You can specify - // a combination of AWS account IDs, self, and amazon. + // a combination of account IDs, self, and amazon. OwnerIds []*string `locationName:"Owner" locationNameList:"Owner" type:"list"` - // The IDs of the AWS accounts that can create volumes from the snapshot. + // The IDs of the accounts that can create volumes from the snapshot. RestorableByUserIds []*string `locationName:"RestorableBy" type:"list"` // The snapshot IDs. @@ -81126,11 +81131,11 @@ type DisableFastSnapshotRestoreSuccessItem struct { // The time at which fast snapshot restores entered the optimizing state. OptimizingTime *time.Time `locationName:"optimizingTime" type:"timestamp"` - // The AWS owner alias that enabled fast snapshot restores on the snapshot. - // This is intended for future use. + // The Amazon Web Services owner alias that enabled fast snapshot restores on + // the snapshot. This is intended for future use. OwnerAlias *string `locationName:"ownerAlias" type:"string"` - // The ID of the AWS account that enabled fast snapshot restores on the snapshot. + // The ID of the account that enabled fast snapshot restores on the snapshot. OwnerId *string `locationName:"ownerId" type:"string"` // The ID of the snapshot. @@ -83857,11 +83862,11 @@ type EnableFastSnapshotRestoreSuccessItem struct { // The time at which fast snapshot restores entered the optimizing state. OptimizingTime *time.Time `locationName:"optimizingTime" type:"timestamp"` - // The AWS owner alias that enabled fast snapshot restores on the snapshot. - // This is intended for future use. + // The Amazon Web Services owner alias that enabled fast snapshot restores on + // the snapshot. This is intended for future use. OwnerAlias *string `locationName:"ownerAlias" type:"string"` - // The ID of the AWS account that enabled fast snapshot restores on the snapshot. + // The ID of the account that enabled fast snapshot restores on the snapshot. OwnerId *string `locationName:"ownerId" type:"string"` // The ID of the snapshot. @@ -83971,7 +83976,7 @@ type EnableFastSnapshotRestoresInput struct { DryRun *bool `type:"boolean"` // The IDs of one or more snapshots. For example, snap-1234567890abcdef0. You - // can specify a snapshot that was shared with you from another AWS account. + // can specify a snapshot that was shared with you from another account. // // SourceSnapshotIds is a required field SourceSnapshotIds []*string `locationName:"SourceSnapshotId" locationNameList:"SnapshotId" type:"list" required:"true"` @@ -88183,7 +88188,7 @@ func (s *GetEbsDefaultKmsKeyIdInput) SetDryRun(v bool) *GetEbsDefaultKmsKeyIdInp type GetEbsDefaultKmsKeyIdOutput struct { _ struct{} `type:"structure"` - // The Amazon Resource Name (ARN) of the default CMK for encryption by default. + // The Amazon Resource Name (ARN) of the default KMS key for encryption by default. KmsKeyId *string `locationName:"kmsKeyId" type:"string"` } @@ -99740,12 +99745,11 @@ type ModifyEbsDefaultKmsKeyIdInput struct { // it is UnauthorizedOperation. DryRun *bool `type:"boolean"` - // The identifier of the AWS Key Management Service (AWS KMS) customer master - // key (CMK) to use for Amazon EBS encryption. If this parameter is not specified, - // your AWS managed CMK for EBS is used. If KmsKeyId is specified, the encrypted - // state must be true. + // The identifier of the Key Management Service (KMS) KMS key to use for Amazon + // EBS encryption. If this parameter is not specified, your KMS key for Amazon + // EBS is used. If KmsKeyId is specified, the encrypted state must be true. // - // You can specify the CMK using any of the following: + // You can specify the KMS key using any of the following: // // * Key ID. For example, 1234abcd-12ab-34cd-56ef-1234567890ab. // @@ -99755,11 +99759,11 @@ type ModifyEbsDefaultKmsKeyIdInput struct { // // * Alias ARN. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias. // - // AWS authenticates the CMK asynchronously. Therefore, if you specify an ID, - // alias, or ARN that is not valid, the action can appear to complete, but eventually - // fails. + // Amazon Web Services authenticates the KMS key asynchronously. Therefore, + // if you specify an ID, alias, or ARN that is not valid, the action can appear + // to complete, but eventually fails. // - // Amazon EBS does not support asymmetric CMKs. + // Amazon EBS does not support asymmetric KMS keys. // // KmsKeyId is a required field KmsKeyId *string `type:"string" required:"true"` @@ -99803,7 +99807,7 @@ func (s *ModifyEbsDefaultKmsKeyIdInput) SetKmsKeyId(v string) *ModifyEbsDefaultK type ModifyEbsDefaultKmsKeyIdOutput struct { _ struct{} `type:"structure"` - // The Amazon Resource Name (ARN) of the default CMK for encryption by default. + // The Amazon Resource Name (ARN) of the default KMS key for encryption by default. KmsKeyId *string `locationName:"kmsKeyId" type:"string"` } @@ -103206,8 +103210,8 @@ type ModifyVolumeInput struct { // // * io2: 100-64,000 IOPS // - // Default: If no IOPS value is specified, the existing value is retained, unless - // a volume type is modified that supports different values. + // Default: The existing value is retained if you keep the same volume type. + // If you change the volume type to io1, io2, or gp3, the default is 3,000. Iops *int64 `type:"integer"` // Specifies whether to enable Amazon EBS Multi-Attach. If you enable Multi-Attach, @@ -103230,13 +103234,14 @@ type ModifyVolumeInput struct { // // * standard: 1-1,024 // - // Default: If no size is specified, the existing size is retained. + // Default: The existing size is retained. Size *int64 `type:"integer"` // The target throughput of the volume, in MiB/s. This parameter is valid only // for gp3 volumes. The maximum value is 1,000. // - // Default: If no throughput value is specified, the existing value is retained. + // Default: The existing value is retained if the source and target volume type + // is gp3. Otherwise, the default value is 125. // // Valid Range: Minimum value of 125. Maximum value of 1000. Throughput *int64 `type:"integer"` @@ -103250,7 +103255,7 @@ type ModifyVolumeInput struct { // EBS volume types (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSVolumeTypes.html) // in the Amazon Elastic Compute Cloud User Guide. // - // Default: If no type is specified, the existing type is retained. + // Default: The existing type is retained. VolumeType *string `type:"string" enum:"VolumeType"` } @@ -112871,7 +112876,8 @@ func (s *ResetEbsDefaultKmsKeyIdInput) SetDryRun(v bool) *ResetEbsDefaultKmsKeyI type ResetEbsDefaultKmsKeyIdOutput struct { _ struct{} `type:"structure"` - // The Amazon Resource Name (ARN) of the default CMK for EBS encryption by default. + // The Amazon Resource Name (ARN) of the default KMS key for EBS encryption + // by default. KmsKeyId *string `locationName:"kmsKeyId" type:"string"` } @@ -117674,21 +117680,20 @@ type Snapshot struct { // Indicates whether the snapshot is encrypted. Encrypted *bool `locationName:"encrypted" type:"boolean"` - // The Amazon Resource Name (ARN) of the AWS Key Management Service (AWS KMS) - // customer master key (CMK) that was used to protect the volume encryption - // key for the parent volume. + // The Amazon Resource Name (ARN) of the Key Management Service (KMS) KMS key + // that was used to protect the volume encryption key for the parent volume. KmsKeyId *string `locationName:"kmsKeyId" type:"string"` - // The ARN of the AWS Outpost on which the snapshot is stored. For more information, - // see EBS Local Snapshot on Outposts (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/snapshots-outposts.html) + // The ARN of the Outpost on which the snapshot is stored. For more information, + // see Amazon EBS local snapshots on Outposts (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/snapshots-outposts.html) // in the Amazon Elastic Compute Cloud User Guide. OutpostArn *string `locationName:"outpostArn" type:"string"` - // The AWS owner alias, from an Amazon-maintained list (amazon). This is not - // the user-configured AWS account alias set using the IAM console. + // The Amazon Web Services owner alias, from an Amazon-maintained list (amazon). + // This is not the user-configured account alias set using the IAM console. OwnerAlias *string `locationName:"ownerAlias" type:"string"` - // The AWS account ID of the EBS snapshot owner. + // The ID of the account that owns the EBS snapshot. OwnerId *string `locationName:"ownerId" type:"string"` // The progress of the snapshot, as a percentage. @@ -117705,9 +117710,9 @@ type Snapshot struct { State *string `locationName:"status" type:"string" enum:"SnapshotState"` // Encrypted Amazon EBS snapshots are copied asynchronously. If a snapshot copy - // operation fails (for example, if the proper AWS Key Management Service (AWS - // KMS) permissions are not obtained) this field displays error state details - // to help you diagnose why the error occurred. This parameter is only returned + // operation fails (for example, if the proper Key Management Service (KMS) + // permissions are not obtained) this field displays error state details to + // help you diagnose why the error occurred. This parameter is only returned // by DescribeSnapshots. StateMessage *string `locationName:"statusMessage" type:"string"` @@ -117993,8 +117998,8 @@ type SnapshotInfo struct { // Indicates whether the snapshot is encrypted. Encrypted *bool `locationName:"encrypted" type:"boolean"` - // The ARN of the AWS Outpost on which the snapshot is stored. For more information, - // see EBS Local Snapshot on Outposts (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/snapshots-outposts.html) + // The ARN of the Outpost on which the snapshot is stored. For more information, + // see Amazon EBS local snapshots on Outposts (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/snapshots-outposts.html) // in the Amazon Elastic Compute Cloud User Guide. OutpostArn *string `locationName:"outpostArn" type:"string"` @@ -125281,9 +125286,8 @@ type Volume struct { // rate at which the volume accumulates I/O credits for bursting. Iops *int64 `locationName:"iops" type:"integer"` - // The Amazon Resource Name (ARN) of the AWS Key Management Service (AWS KMS) - // customer master key (CMK) that was used to protect the volume encryption - // key for the volume. + // The Amazon Resource Name (ARN) of the Key Management Service (KMS) KMS key + // that was used to protect the volume encryption key for the volume. KmsKeyId *string `locationName:"kmsKeyId" type:"string"` // Indicates whether Amazon EBS Multi-Attach is enabled.