Specifies the accessibility options for the replication instance. A value of true represents an instance with a public IP address. A value of false represents an instance with a private IP address. The default value is true.
An option to set to avoid returning information about settings. Use this to reduce overhead when setting information is too large. To use this option, choose true; otherwise, choose false (the default).
Specifies the document ID. Use this setting when NestingLevel is set to \"none\".
Default value is \"false\".
Set this option to true for DMS to migrate documentation using the documentation type _doc. OpenSearch and an Elasticsearch cluster only support the _doc documentation type in versions 7. x and later. The default value is false.
A value that marks this endpoint setting as sensitive.
", "GcpMySQLSettings$CleanSourceMetadataOnMismatch": "Adjusts the behavior of DMS when migrating from an SQL Server source database that is hosted as part of an Always On availability group cluster. If you need DMS to poll all the nodes in the Always On cluster for transaction backups, set this attribute to false.
Enables ongoing replication (CDC) as a BOOLEAN value. The default is true.
", @@ -180,6 +181,7 @@ "MicrosoftSQLServerSettings$ReadBackupOnly": "When this attribute is set to Y, DMS only reads changes from transaction log backups and doesn't read from the active transaction log file during ongoing replication. Setting this parameter to Y enables you to control active transaction log file growth during full load and ongoing replication tasks. However, it can add some source latency to ongoing replication.
Use this to attribute to transfer data for full-load operations using BCP. When the target table contains an identity column that does not exist in the source table, you must disable the use BCP for loading table option.
", "MicrosoftSQLServerSettings$UseThirdPartyBackupDevice": "When this attribute is set to Y, DMS processes third-party transaction log backups if they are created in native format.
Use the TrimSpaceInChar source endpoint setting to trim data on CHAR and NCHAR data types during migration. The default value is true.
If this attribute is Y, the current call to ModifyEndpoint replaces all existing endpoint settings with the exact settings that you specify in this call. If this attribute is N, the current call to ModifyEndpoint does two things:
It replaces any endpoint settings that already exist with new values, for settings with the same names.
It creates new endpoint settings that you specify in the call, for settings with different names.
For example, if you call create-endpoint ... --endpoint-settings '{\"a\":1}' ..., the endpoint has the following endpoint settings: '{\"a\":1}'. If you then call modify-endpoint ... --endpoint-settings '{\"b\":2}' ... for the same endpoint, the endpoint has the following settings: '{\"a\":1,\"b\":2}'.
However, suppose that you follow this with a call to modify-endpoint ... --endpoint-settings '{\"b\":2}' --exact-settings ... for that same endpoint again. Then the endpoint has the following settings: '{\"b\":2}'. All existing settings are replaced with the exact settings that you specify.
A Boolean value; set to true to activate the subscription.
", "ModifyReplicationInstanceMessage$MultiAZ": " Specifies whether the replication instance is a Multi-AZ deployment. You can't set the AvailabilityZone parameter if the Multi-AZ parameter is set to true.
Set this attribute to Y to capture change data using the Binary Reader utility. Set UseLogminerReader to N to set this attribute to Y. To use Binary Reader with Amazon RDS for Oracle as the source, you set additional attributes. For more information about using this setting with Oracle Automatic Storage Management (ASM), see Using Oracle LogMiner or DMS Binary Reader for CDC.
Set this attribute to Y to have DMS use a direct path full load. Specify this value to use the direct path protocol in the Oracle Call Interface (OCI). By using this OCI protocol, you can bulk-load Oracle target tables during a full load.
", "OracleSettings$UseLogminerReader": "Set this attribute to Y to capture change data using the Oracle LogMiner utility (the default). Set this attribute to N if you want to access the redo logs as a binary file. When you set UseLogminerReader to N, also set UseBfile to Y. For more information on this setting and using Oracle ASM, see Using Oracle LogMiner or DMS Binary Reader for CDC in the DMS User Guide.
Use the TrimSpaceInChar source endpoint setting to trim data on CHAR and NCHAR data types during migration. The default value is true.
To capture DDL events, DMS creates various artifacts in the PostgreSQL database when the task starts. You can later remove these artifacts.
If this value is set to N, you don't have to create tables or triggers on the source database.
When set to true, this value causes a task to fail if the actual size of a LOB column is greater than the specified LobMaxSize.
If task is set to Limited LOB mode and this option is set to true, the task fails instead of truncating the LOB data.
", "PostgreSQLSettings$HeartbeatEnable": "The write-ahead log (WAL) heartbeat feature mimics a dummy transaction. By doing this, it prevents idle logical replication slots from holding onto old WAL logs, which can result in storage full situations on the source. This heartbeat keeps restart_lsn moving and prevents storage full scenarios.
Use the TrimSpaceInChar source endpoint setting to trim data on CHAR and NCHAR data types during migration. The default value is true.
If this parameter is true, the reboot is conducted through a Multi-AZ failover. If the instance isn't configured for Multi-AZ, then you can't specify true. ( --force-planned-failover and --force-failover can't both be set to true.)
If this parameter is true, the reboot is conducted through a planned Multi-AZ failover where resources are released and cleaned up prior to conducting the failover. If the instance isn''t configured for Multi-AZ, then you can't specify true. ( --force-planned-failover and --force-failover can't both be set to true.)
A value that indicates to allow any date format, including invalid formats such as 00/00/00 00:00:00, to be loaded without generating an error. You can choose true or false (the default).
This parameter applies only to TIMESTAMP and DATE columns. Always use ACCEPTANYDATE with the DATEFORMAT parameter. If the date format for the data doesn't match the DATEFORMAT specification, Amazon Redshift inserts a NULL value into that field.
", @@ -225,6 +229,7 @@ "S3Settings$UseTaskStartTimeForFullLoadTimestamp": "When set to true, this parameter uses the task start time as the timestamp column value instead of the time data is written to target. For full load, when useTaskStartTimeForFullLoadTimestamp is set to true, each row of the timestamp column contains the task start time. For CDC loads, each row of the timestamp column contains the transaction commit time.
When useTaskStartTimeForFullLoadTimestamp is set to false, the full load timestamp in the timestamp column increments with the time data arrives at the target.
An optional parameter that, when set to true or y, you can use to add column name information to the .csv output file.
The default value is false. Valid values are true, false, y, and n.
For an S3 source, when this value is set to true or y, each leading double quotation mark has to be followed by an ending double quotation mark. This formatting complies with RFC 4180. When this value is set to false or n, string literals are copied to the target as is. In this case, a delimiter (row or column) signals the end of the field. Thus, you can't use a delimiter as part of the string, because it signals the end of the value.
For an S3 target, an optional parameter used to set behavior to comply with RFC 4180 for data migrated to Amazon S3 using .csv file format only. When this value is set to true or y using Amazon S3 as a target, if the data has quotation marks or newline characters in it, DMS encloses the entire column with an additional pair of double quotation marks (\"). Every quotation mark within the data is repeated twice.
The default value is true. Valid values include true, false, y, and n.
Use the S3 target endpoint setting AddTrailingPaddingCharacter to add padding on string data. The default value is false.
A value that indicates if the table was reloaded (true) or loaded as part of a new full load operation (false).
Filters applied to event subscriptions.
Valid filter names: event-subscription-arn | event-subscription-id
", "DescribeEventsMessage$Filters": "Filters applied to events. The only valid filter is replication-instance-id.
If you specify any of the following filters, the output includes information for only those collectors that meet the filter criteria:
collector-referenced-id – The ID of the collector agent, for example d4610ac5-e323-4ad9-bc50-eaf7249dfe9d.
collector-name – The name of the collector agent.
An example is: describe-fleet-advisor-collectors --filter Name=\"collector-referenced-id\",Values=\"d4610ac5-e323-4ad9-bc50-eaf7249dfe9d\"
If you specify any of the following filters, the output includes information for only those databases that meet the filter criteria:
database-id – The ID of the database, for example d4610ac5-e323-4ad9-bc50-eaf7249dfe9d.
database-name – The name of the database.
database-engine – The name of the database engine.
server-ip-address – The IP address of the database server.
database-ip-address – The IP address of the database.
collector-name – The name of the associated Fleet Advisor collector.
An example is: describe-fleet-advisor-databases --filter Name=\"database-id\",Values=\"d4610ac5-e323-4ad9-bc50-eaf7249dfe9d\"
If you specify any of the following filters, the output includes information for only those databases that meet the filter criteria:
database-id – The ID of the database.
database-name – The name of the database.
database-engine – The name of the database engine.
server-ip-address – The IP address of the database server.
database-ip-address – The IP address of the database.
collector-name – The name of the associated Fleet Advisor collector.
An example is: describe-fleet-advisor-databases --filter Name=\"database-id\",Values=\"45\"
If you specify any of the following filters, the output includes information for only those schema objects that meet the filter criteria:
schema-id – The ID of the schema, for example d4610ac5-e323-4ad9-bc50-eaf7249dfe9d.
Example: describe-fleet-advisor-schema-object-summary --filter Name=\"schema-id\",Values=\"50\"
If you specify any of the following filters, the output includes information for only those schemas that meet the filter criteria:
complexity – The schema's complexity, for example Simple.
database-id – The ID of the schema's database.
database-ip-address – The IP address of the schema's database.
database-name – The name of the schema's database.
database-engine – The name of the schema database's engine.
original-schema-name – The name of the schema's database's main schema.
schema-id – The ID of the schema, for example 15.
schema-name – The name of the schema.
server-ip-address – The IP address of the schema database's server.
An example is: describe-fleet-advisor-schemas --filter Name=\"schema-id\",Values=\"50\"
The settings for the replication task.
", "ReplicationTask$Status": "The status of the replication task. This response parameter can return one of the following values:
\"moving\" – The task is being moved in response to running the MoveReplicationTask operation.
\"creating\" – The task is being created in response to running the CreateReplicationTask operation.
\"deleting\" – The task is being deleted in response to running the DeleteReplicationTask operation.
\"failed\" – The task failed to successfully complete the database migration in response to running the StartReplicationTask operation.
\"failed-move\" – The task failed to move in response to running the MoveReplicationTask operation.
\"modifying\" – The task definition is being modified in response to running the ModifyReplicationTask operation.
\"ready\" – The task is in a ready state where it can respond to other task operations, such as StartReplicationTask or DeleteReplicationTask .
\"running\" – The task is performing a database migration in response to running the StartReplicationTask operation.
\"starting\" – The task is preparing to perform a database migration in response to running the StartReplicationTask operation.
\"stopped\" – The task has stopped in response to running the StopReplicationTask operation.
\"stopping\" – The task is preparing to stop in response to running the StopReplicationTask operation.
\"testing\" – The database migration specified for this task is being tested in response to running either the StartReplicationTaskAssessmentRun or the StartReplicationTaskAssessment operation.
StartReplicationTaskAssessmentRun is an improved premigration task assessment operation. The StartReplicationTaskAssessment operation assesses data type compatibility only between the source and target database of a given migration task. In contrast, StartReplicationTaskAssessmentRun enables you to specify a variety of premigration task assessments in addition to data type compatibility. These assessments include ones for the validity of primary key definitions and likely issues with database migration performance, among others.
The last error (failure) message generated for the replication task.
", - "ReplicationTask$StopReason": "The reason the replication task was stopped. This response parameter can return one of the following values:
\"STOP_REASON_FULL_LOAD_COMPLETED\" – Full-load migration completed.
\"STOP_REASON_CACHED_CHANGES_APPLIED\" – Change data capture (CDC) load completed.
\"STOP_REASON_CACHED_CHANGES_NOT_APPLIED\" – In a full-load and CDC migration, the full load stopped as specified before starting the CDC migration.
\"STOP_REASON_SERVER_TIME\" – The migration stopped at the specified server time.
The reason the replication task was stopped. This response parameter can return one of the following values:
\"Stop Reason NORMAL\"
\"Stop Reason RECOVERABLE_ERROR\"
\"Stop Reason FATAL_ERROR\"
\"Stop Reason FULL_LOAD_ONLY_FINISHED\"
\"Stop Reason STOPPED_AFTER_FULL_LOAD\" – Full load completed, with cached changes not applied
\"Stop Reason STOPPED_AFTER_CACHED_EVENTS\" – Full load completed, with cached changes applied
\"Stop Reason EXPRESS_LICENSE_LIMITS_REACHED\"
\"Stop Reason STOPPED_AFTER_DDL_APPLY\" – User-defined stop task after DDL applied
\"Stop Reason STOPPED_DUE_TO_LOW_MEMORY\"
\"Stop Reason STOPPED_DUE_TO_LOW_DISK\"
\"Stop Reason STOPPED_AT_SERVER_TIME\" – User-defined server time for stopping task
\"Stop Reason STOPPED_AT_COMMIT_TIME\" – User-defined commit time for stopping task
\"Stop Reason RECONFIGURATION_RESTART\"
\"Stop Reason RECYCLE_TASK\"
Indicates when you want a change data capture (CDC) operation to start. Use either CdcStartPosition or CdcStartTime to specify when you want the CDC operation to start. Specifying both values results in an error.
The value can be in date, checkpoint, or LSN/SCN format.
Date Example: --cdc-start-position “2018-03-08T12:12:12”
Checkpoint Example: --cdc-start-position \"checkpoint:V1#27#mysql-bin-changelog.157832:1975:-1:2002:677883278264080:mysql-bin-changelog.157832:1876#0#0#*#0#93\"
LSN Example: --cdc-start-position “mysql-bin-changelog.000024:373”
", "ReplicationTask$CdcStopPosition": "Indicates when you want a change data capture (CDC) operation to stop. The value can be either server time or commit time.
Server time example: --cdc-stop-position “server_time:2018-02-09T12:12:12”
Commit time example: --cdc-stop-position “commit_time: 2018-02-09T12:12:12 “
", "ReplicationTask$RecoveryCheckpoint": "Indicates the last checkpoint that occurred during a change data capture (CDC) operation. You can provide this value to the CdcStartPosition parameter to start a CDC operation that begins at that checkpoint.
Specifies the folder path of CDC files. For an S3 source, this setting is required if a task captures change data; otherwise, it's optional. If CdcPath is set, DMS reads CDC files from this path and replicates the data changes to the target endpoint. For an S3 target if you set PreserveTransactions to true, DMS verifies that you have set this parameter to a folder path on your S3 target where DMS can save the transaction order for the CDC load. DMS creates this CDC folder path in either your S3 target working directory or the S3 target location specified by BucketFolder and BucketName .
For example, if you specify CdcPath as MyChangedData, and you specify BucketName as MyTargetBucket but do not specify BucketFolder, DMS creates the CDC folder path following: MyTargetBucket/MyChangedData.
If you specify the same CdcPath, and you specify BucketName as MyTargetBucket and BucketFolder as MyTargetData, DMS creates the CDC folder path following: MyTargetBucket/MyTargetData/MyChangedData.
For more information on CDC including transaction order on an S3 target, see Capturing data changes (CDC) including transaction order on the S3 target.
This setting is supported in DMS versions 3.4.2 and later.
An optional parameter that specifies how DMS treats null values. While handling the null value, you can use this parameter to pass a user-defined string as null when writing to the target. For example, when target columns are not nullable, you can use this option to differentiate between the empty string value and the null value. So, if you set this parameter value to the empty string (\"\" or ''), DMS treats the empty string as the null value instead of NULL.
The default value is NULL. Valid values include any valid string.
When creating an S3 target endpoint, set DatePartitionTimezone to convert the current UTC time into a specified time zone. The conversion occurs when a date partition folder is created and a CDC filename is generated. The time zone format is Area/Location. Use this parameter when DatePartitionedEnabled is set to true, as shown in the following example.
s3-settings='{\"DatePartitionEnabled\": true, \"DatePartitionSequence\": \"YYYYMMDDHH\", \"DatePartitionDelimiter\": \"SLASH\", \"DatePartitionTimezone\":\"Asia/Seoul\", \"BucketName\": \"dms-nattarat-test\"}'
To specify a bucket owner and prevent sniping, you can use the ExpectedBucketOwner endpoint setting.
Example: --s3-settings='{\"ExpectedBucketOwner\": \"AWS_Account_ID\"}'
When you make a request to test a connection or perform a migration, S3 checks the account ID of the bucket owner against the specified parameter.
", "SchemaList$member": null, "SchemaResponse$Complexity": "The complexity level of the code in a schema in a Fleet Advisor collector inventory.
", "SchemaResponse$SchemaId": "The ID of a schema in a Fleet Advisor collector inventory.
", diff --git a/models/apis/rds/2014-10-31/docs-2.json b/models/apis/rds/2014-10-31/docs-2.json index b71f11e0f0..8114d84243 100644 --- a/models/apis/rds/2014-10-31/docs-2.json +++ b/models/apis/rds/2014-10-31/docs-2.json @@ -8,28 +8,28 @@ "AddTagsToResource": "Adds metadata tags to an Amazon RDS resource. These tags can also be used with cost allocation reporting to track cost associated with Amazon RDS resources, or used in a Condition statement in an IAM policy for Amazon RDS.
For an overview on tagging Amazon RDS resources, see Tagging Amazon RDS Resources.
", "ApplyPendingMaintenanceAction": "Applies a pending maintenance action to a resource (for example, to a DB instance).
", "AuthorizeDBSecurityGroupIngress": "Enables ingress to a DBSecurityGroup using one of two forms of authorization. First, EC2 or VPC security groups can be added to the DBSecurityGroup if the application using the database is running on EC2 or VPC instances. Second, IP ranges are available if the application accessing your database is running on the internet. Required parameters for this API are one of CIDR range, EC2SecurityGroupId for VPC, or (EC2SecurityGroupOwnerId and either EC2SecurityGroupName or EC2SecurityGroupId for non-VPC).
You can't authorize ingress from an EC2 security group in one Amazon Web Services Region to an Amazon RDS DB instance in another. You can't authorize ingress from a VPC security group in one VPC to an Amazon RDS DB instance in another.
For an overview of CIDR ranges, go to the Wikipedia Tutorial.
", - "BacktrackDBCluster": "Backtracks a DB cluster to a specific time, without creating a new DB cluster.
For more information on backtracking, see Backtracking an Aurora DB Cluster in the Amazon Aurora User Guide.
This action only applies to Aurora MySQL DB clusters.
Backtracks a DB cluster to a specific time, without creating a new DB cluster.
For more information on backtracking, see Backtracking an Aurora DB Cluster in the Amazon Aurora User Guide.
This action applies only to Aurora MySQL DB clusters.
Cancels an export task in progress that is exporting a snapshot to Amazon S3. Any data that has already been written to the S3 bucket isn't removed.
", "CopyDBClusterParameterGroup": "Copies the specified DB cluster parameter group.
", - "CopyDBClusterSnapshot": "Copies a snapshot of a DB cluster.
To copy a DB cluster snapshot from a shared manual DB cluster snapshot, SourceDBClusterSnapshotIdentifier must be the Amazon Resource Name (ARN) of the shared DB cluster snapshot.
You can copy an encrypted DB cluster snapshot from another Amazon Web Services Region. In that case, the Amazon Web Services Region where you call the CopyDBClusterSnapshot action is the destination Amazon Web Services Region for the encrypted DB cluster snapshot to be copied to. To copy an encrypted DB cluster snapshot from another Amazon Web Services Region, you must provide the following values:
KmsKeyId - The Amazon Web Services Key Management System (Amazon Web Services KMS) key identifier for the key to use to encrypt the copy of the DB cluster snapshot in the destination Amazon Web Services Region.
PreSignedUrl - A URL that contains a Signature Version 4 signed request for the CopyDBClusterSnapshot action to be called in the source Amazon Web Services Region where the DB cluster snapshot is copied from. The pre-signed URL must be a valid request for the CopyDBClusterSnapshot API action that can be executed in the source Amazon Web Services Region that contains the encrypted DB cluster snapshot to be copied.
The pre-signed URL request must contain the following parameter values:
KmsKeyId - The Amazon Web Services KMS key identifier for the KMS key to use to encrypt the copy of the DB cluster snapshot in the destination Amazon Web Services Region. This is the same identifier for both the CopyDBClusterSnapshot action that is called in the destination Amazon Web Services Region, and the action contained in the pre-signed URL.
DestinationRegion - The name of the Amazon Web Services Region that the DB cluster snapshot is to be created in.
SourceDBClusterSnapshotIdentifier - The DB cluster snapshot identifier for the encrypted DB cluster snapshot to be copied. This identifier must be in the Amazon Resource Name (ARN) format for the source Amazon Web Services Region. For example, if you are copying an encrypted DB cluster snapshot from the us-west-2 Amazon Web Services Region, then your SourceDBClusterSnapshotIdentifier looks like the following example: arn:aws:rds:us-west-2:123456789012:cluster-snapshot:aurora-cluster1-snapshot-20161115.
To learn how to generate a Signature Version 4 signed request, see Authenticating Requests: Using Query Parameters (Amazon Web Services Signature Version 4) and Signature Version 4 Signing Process.
If you are using an Amazon Web Services SDK tool or the CLI, you can specify SourceRegion (or --source-region for the CLI) instead of specifying PreSignedUrl manually. Specifying SourceRegion autogenerates a pre-signed URL that is a valid request for the operation that can be executed in the source Amazon Web Services Region.
TargetDBClusterSnapshotIdentifier - The identifier for the new copy of the DB cluster snapshot in the destination Amazon Web Services Region.
SourceDBClusterSnapshotIdentifier - The DB cluster snapshot identifier for the encrypted DB cluster snapshot to be copied. This identifier must be in the ARN format for the source Amazon Web Services Region and is the same value as the SourceDBClusterSnapshotIdentifier in the pre-signed URL.
To cancel the copy operation once it is in progress, delete the target DB cluster snapshot identified by TargetDBClusterSnapshotIdentifier while that DB cluster snapshot is in \"copying\" status.
For more information on copying encrypted Amazon Aurora DB cluster snapshots from one Amazon Web Services Region to another, see Copying a Snapshot in the Amazon Aurora User Guide.
For more information on Amazon Aurora DB clusters, see What is Amazon Aurora? in the Amazon Aurora User Guide.
For more information on Multi-AZ DB clusters, see Multi-AZ deployments with two readable standby DB instances in the Amazon RDS User Guide.
", + "CopyDBClusterSnapshot": "Copies a snapshot of a DB cluster.
To copy a DB cluster snapshot from a shared manual DB cluster snapshot, SourceDBClusterSnapshotIdentifier must be the Amazon Resource Name (ARN) of the shared DB cluster snapshot.
You can copy an encrypted DB cluster snapshot from another Amazon Web Services Region. In that case, the Amazon Web Services Region where you call the CopyDBClusterSnapshot operation is the destination Amazon Web Services Region for the encrypted DB cluster snapshot to be copied to. To copy an encrypted DB cluster snapshot from another Amazon Web Services Region, you must provide the following values:
KmsKeyId - The Amazon Web Services Key Management System (Amazon Web Services KMS) key identifier for the key to use to encrypt the copy of the DB cluster snapshot in the destination Amazon Web Services Region.
TargetDBClusterSnapshotIdentifier - The identifier for the new copy of the DB cluster snapshot in the destination Amazon Web Services Region.
SourceDBClusterSnapshotIdentifier - The DB cluster snapshot identifier for the encrypted DB cluster snapshot to be copied. This identifier must be in the ARN format for the source Amazon Web Services Region and is the same value as the SourceDBClusterSnapshotIdentifier in the presigned URL.
To cancel the copy operation once it is in progress, delete the target DB cluster snapshot identified by TargetDBClusterSnapshotIdentifier while that DB cluster snapshot is in \"copying\" status.
For more information on copying encrypted Amazon Aurora DB cluster snapshots from one Amazon Web Services Region to another, see Copying a Snapshot in the Amazon Aurora User Guide.
For more information on Amazon Aurora DB clusters, see What is Amazon Aurora? in the Amazon Aurora User Guide.
For more information on Multi-AZ DB clusters, see Multi-AZ deployments with two readable standby DB instances in the Amazon RDS User Guide.
", "CopyDBParameterGroup": "Copies the specified DB parameter group.
", - "CopyDBSnapshot": "Copies the specified DB snapshot. The source DB snapshot must be in the available state.
You can copy a snapshot from one Amazon Web Services Region to another. In that case, the Amazon Web Services Region where you call the CopyDBSnapshot action is the destination Amazon Web Services Region for the DB snapshot copy.
This command doesn't apply to RDS Custom.
For more information about copying snapshots, see Copying a DB Snapshot in the Amazon RDS User Guide.
", + "CopyDBSnapshot": "Copies the specified DB snapshot. The source DB snapshot must be in the available state.
You can copy a snapshot from one Amazon Web Services Region to another. In that case, the Amazon Web Services Region where you call the CopyDBSnapshot operation is the destination Amazon Web Services Region for the DB snapshot copy.
This command doesn't apply to RDS Custom.
For more information about copying snapshots, see Copying a DB Snapshot in the Amazon RDS User Guide.
", "CopyOptionGroup": "Copies the specified option group.
", "CreateCustomDBEngineVersion": "Creates a custom DB engine version (CEV). A CEV is a binary volume snapshot of a database engine and specific AMI. The supported engines are the following:
Oracle Database 12.1 Enterprise Edition with the January 2021 or later RU/RUR
Oracle Database 19c Enterprise Edition with the January 2021 or later RU/RUR
Amazon RDS, which is a fully managed service, supplies the Amazon Machine Image (AMI) and database software. The Amazon RDS database software is preinstalled, so you need only select a DB engine and version, and create your database. With Amazon RDS Custom for Oracle, you upload your database installation files in Amazon S3.
When you create a custom engine version, you specify the files in a JSON document called a CEV manifest. This document describes installation .zip files stored in Amazon S3. RDS Custom creates your CEV from the installation files that you provided. This service model is called Bring Your Own Media (BYOM).
Creation takes approximately two hours. If creation fails, RDS Custom issues RDS-EVENT-0196 with the message Creation failed for custom engine version, and includes details about the failure. For example, the event prints missing files.
After you create the CEV, it is available for use. You can create multiple CEVs, and create multiple RDS Custom instances from any CEV. You can also change the status of a CEV to make it available or inactive.
The MediaImport service that imports files from Amazon S3 to create CEVs isn't integrated with Amazon Web Services CloudTrail. If you turn on data logging for Amazon RDS in CloudTrail, calls to the CreateCustomDbEngineVersion event aren't logged. However, you might see calls from the API gateway that accesses your Amazon S3 bucket. These calls originate from the MediaImport service for the CreateCustomDbEngineVersion event.
For more information, see Creating a CEV in the Amazon RDS User Guide.
", - "CreateDBCluster": "Creates a new Amazon Aurora DB cluster or Multi-AZ DB cluster.
You can use the ReplicationSourceIdentifier parameter to create an Amazon Aurora DB cluster as a read replica of another DB cluster or Amazon RDS MySQL or PostgreSQL DB instance. For cross-Region replication where the DB cluster identified by ReplicationSourceIdentifier is encrypted, also specify the PreSignedUrl parameter.
For more information on Amazon Aurora, see What is Amazon Aurora? in the Amazon Aurora User Guide.
For more information on Multi-AZ DB clusters, see Multi-AZ deployments with two readable standby DB instances in the Amazon RDS User Guide.
", - "CreateDBClusterEndpoint": "Creates a new custom endpoint and associates it with an Amazon Aurora DB cluster.
This action only applies to Aurora DB clusters.
Creates a new DB cluster parameter group.
Parameters in a DB cluster parameter group apply to all of the instances in a DB cluster.
A DB cluster parameter group is initially created with the default parameters for the database engine used by instances in the DB cluster. To provide custom values for any of the parameters, you must modify the group after creating it using ModifyDBClusterParameterGroup. Once you've created a DB cluster parameter group, you need to associate it with your DB cluster using ModifyDBCluster.
When you associate a new DB cluster parameter group with a running Aurora DB cluster, reboot the DB instances in the DB cluster without failover for the new DB cluster parameter group and associated settings to take effect.
When you associate a new DB cluster parameter group with a running Multi-AZ DB cluster, reboot the DB cluster without failover for the new DB cluster parameter group and associated settings to take effect.
After you create a DB cluster parameter group, you should wait at least 5 minutes before creating your first DB cluster that uses that DB cluster parameter group as the default parameter group. This allows Amazon RDS to fully complete the create action before the DB cluster parameter group is used as the default for a new DB cluster. This is especially important for parameters that are critical when creating the default database for a DB cluster, such as the character set for the default database defined by the character_set_database parameter. You can use the Parameter Groups option of the Amazon RDS console or the DescribeDBClusterParameters action to verify that your DB cluster parameter group has been created or modified.
For more information on Amazon Aurora, see What is Amazon Aurora? in the Amazon Aurora User Guide.
For more information on Multi-AZ DB clusters, see Multi-AZ deployments with two readable standby DB instances in the Amazon RDS User Guide.
", + "CreateDBCluster": "Creates a new Amazon Aurora DB cluster or Multi-AZ DB cluster.
You can use the ReplicationSourceIdentifier parameter to create an Amazon Aurora DB cluster as a read replica of another DB cluster or Amazon RDS MySQL or PostgreSQL DB instance.
For more information on Amazon Aurora, see What is Amazon Aurora? in the Amazon Aurora User Guide.
For more information on Multi-AZ DB clusters, see Multi-AZ deployments with two readable standby DB instances in the Amazon RDS User Guide.
", + "CreateDBClusterEndpoint": "Creates a new custom endpoint and associates it with an Amazon Aurora DB cluster.
This action applies only to Aurora DB clusters.
Creates a new DB cluster parameter group.
Parameters in a DB cluster parameter group apply to all of the instances in a DB cluster.
A DB cluster parameter group is initially created with the default parameters for the database engine used by instances in the DB cluster. To provide custom values for any of the parameters, you must modify the group after creating it using ModifyDBClusterParameterGroup. Once you've created a DB cluster parameter group, you need to associate it with your DB cluster using ModifyDBCluster.
When you associate a new DB cluster parameter group with a running Aurora DB cluster, reboot the DB instances in the DB cluster without failover for the new DB cluster parameter group and associated settings to take effect.
When you associate a new DB cluster parameter group with a running Multi-AZ DB cluster, reboot the DB cluster without failover for the new DB cluster parameter group and associated settings to take effect.
After you create a DB cluster parameter group, you should wait at least 5 minutes before creating your first DB cluster that uses that DB cluster parameter group as the default parameter group. This allows Amazon RDS to fully complete the create action before the DB cluster parameter group is used as the default for a new DB cluster. This is especially important for parameters that are critical when creating the default database for a DB cluster, such as the character set for the default database defined by the character_set_database parameter. You can use the Parameter Groups option of the Amazon RDS console or the DescribeDBClusterParameters operation to verify that your DB cluster parameter group has been created or modified.
For more information on Amazon Aurora, see What is Amazon Aurora? in the Amazon Aurora User Guide.
For more information on Multi-AZ DB clusters, see Multi-AZ deployments with two readable standby DB instances in the Amazon RDS User Guide.
", "CreateDBClusterSnapshot": "Creates a snapshot of a DB cluster.
For more information on Amazon Aurora, see What is Amazon Aurora? in the Amazon Aurora User Guide.
For more information on Multi-AZ DB clusters, see Multi-AZ deployments with two readable standby DB instances in the Amazon RDS User Guide.
", - "CreateDBInstance": "Creates a new DB instance.
", - "CreateDBInstanceReadReplica": "Creates a new DB instance that acts as a read replica for an existing source DB instance. You can create a read replica for a DB instance running MySQL, MariaDB, Oracle, PostgreSQL, or SQL Server. For more information, see Working with Read Replicas in the Amazon RDS User Guide.
Amazon Aurora doesn't support this action. Call the CreateDBInstance action to create a DB instance for an Aurora DB cluster.
All read replica DB instances are created with backups disabled. All other DB instance attributes (including DB security groups and DB parameter groups) are inherited from the source DB instance, except as specified.
Your source DB instance must have backup retention enabled.
Creates a new DB instance.
The new DB instance can be an RDS DB instance, or it can be a DB instance in an Aurora DB cluster. For an Aurora DB cluster, you can call this operation multiple times to add more than one DB instance to the cluster.
For more information about creating an RDS DB instance, see Creating an Amazon RDS DB instance in the Amazon RDS User Guide.
For more information about creating a DB instance in an Aurora DB cluster, see Creating an Amazon Aurora DB cluster in the Amazon Aurora User Guide.
", + "CreateDBInstanceReadReplica": "Creates a new DB instance that acts as a read replica for an existing source DB instance. You can create a read replica for a DB instance running MySQL, MariaDB, Oracle, PostgreSQL, or SQL Server. For more information, see Working with Read Replicas in the Amazon RDS User Guide.
Amazon Aurora doesn't support this operation. Call the CreateDBInstance operation to create a DB instance for an Aurora DB cluster.
All read replica DB instances are created with backups disabled. All other DB instance attributes (including DB security groups and DB parameter groups) are inherited from the source DB instance, except as specified.
Your source DB instance must have backup retention enabled.
Creates a new DB parameter group.
A DB parameter group is initially created with the default parameters for the database engine used by the DB instance. To provide custom values for any of the parameters, you must modify the group after creating it using ModifyDBParameterGroup. Once you've created a DB parameter group, you need to associate it with your DB instance using ModifyDBInstance. When you associate a new DB parameter group with a running DB instance, you need to reboot the DB instance without failover for the new DB parameter group and associated settings to take effect.
This command doesn't apply to RDS Custom.
After you create a DB parameter group, you should wait at least 5 minutes before creating your first DB instance that uses that DB parameter group as the default parameter group. This allows Amazon RDS to fully complete the create action before the parameter group is used as the default for a new DB instance. This is especially important for parameters that are critical when creating the default database for a DB instance, such as the character set for the default database defined by the character_set_database parameter. You can use the Parameter Groups option of the Amazon RDS console or the DescribeDBParameters command to verify that your DB parameter group has been created or modified.
Creates a new DB proxy.
", "CreateDBProxyEndpoint": "Creates a DBProxyEndpoint. Only applies to proxies that are associated with Aurora DB clusters. You can use DB proxy endpoints to specify read/write or read-only access to the DB cluster. You can also use DB proxy endpoints to access a DB proxy through a different VPC than the proxy's default VPC.
Creates a new DB security group. DB security groups control access to a DB instance.
A DB security group controls access to EC2-Classic DB instances that are not in a VPC.
Creates a snapshot of a DB instance. The source DB instance must be in the available or storage-optimization state.
Creates a new DB subnet group. DB subnet groups must contain at least one subnet in at least two AZs in the Amazon Web Services Region.
", - "CreateEventSubscription": "Creates an RDS event notification subscription. This action requires a topic Amazon Resource Name (ARN) created by either the RDS console, the SNS console, or the SNS API. To obtain an ARN with SNS, you must create a topic in Amazon SNS and subscribe to the topic. The ARN is displayed in the SNS console.
You can specify the type of source (SourceType) that you want to be notified of and provide a list of RDS sources (SourceIds) that triggers the events. You can also provide a list of event categories (EventCategories) for events that you want to be notified of. For example, you can specify SourceType = db-instance, SourceIds = mydbinstance1, mydbinstance2 and EventCategories = Availability, Backup.
If you specify both the SourceType and SourceIds, such as SourceType = db-instance and SourceIds = myDBInstance1, you are notified of all the db-instance events for the specified source. If you specify a SourceType but do not specify SourceIds, you receive notice of the events for that source type for all your RDS sources. If you don't specify either the SourceType or the SourceIds, you are notified of events generated from all RDS sources belonging to your customer account.
RDS event notification is only available for unencrypted SNS topics. If you specify an encrypted SNS topic, event notifications aren't sent for the topic.
Creates an Aurora global database spread across multiple Amazon Web Services Regions. The global database contains a single primary cluster with read-write capability, and a read-only secondary cluster that receives data from the primary cluster through high-speed replication performed by the Aurora storage subsystem.
You can create a global database that is initially empty, and then add a primary cluster and a secondary cluster to it. Or you can specify an existing Aurora cluster during the create operation, and this cluster becomes the primary cluster of the global database.
This action only applies to Aurora DB clusters.
Creates an RDS event notification subscription. This operation requires a topic Amazon Resource Name (ARN) created by either the RDS console, the SNS console, or the SNS API. To obtain an ARN with SNS, you must create a topic in Amazon SNS and subscribe to the topic. The ARN is displayed in the SNS console.
You can specify the type of source (SourceType) that you want to be notified of and provide a list of RDS sources (SourceIds) that triggers the events. You can also provide a list of event categories (EventCategories) for events that you want to be notified of. For example, you can specify SourceType = db-instance, SourceIds = mydbinstance1, mydbinstance2 and EventCategories = Availability, Backup.
If you specify both the SourceType and SourceIds, such as SourceType = db-instance and SourceIds = myDBInstance1, you are notified of all the db-instance events for the specified source. If you specify a SourceType but do not specify SourceIds, you receive notice of the events for that source type for all your RDS sources. If you don't specify either the SourceType or the SourceIds, you are notified of events generated from all RDS sources belonging to your customer account.
RDS event notification is only available for unencrypted SNS topics. If you specify an encrypted SNS topic, event notifications aren't sent for the topic.
Creates an Aurora global database spread across multiple Amazon Web Services Regions. The global database contains a single primary cluster with read-write capability, and a read-only secondary cluster that receives data from the primary cluster through high-speed replication performed by the Aurora storage subsystem.
You can create a global database that is initially empty, and then add a primary cluster and a secondary cluster to it. Or you can specify an existing Aurora cluster during the create operation, and this cluster becomes the primary cluster of the global database.
This action applies only to Aurora DB clusters.
Creates a new option group. You can create up to 20 option groups.
This command doesn't apply to RDS Custom.
", "DeleteCustomDBEngineVersion": "Deletes a custom engine version. To run this command, make sure you meet the following prerequisites:
The CEV must not be the default for RDS Custom. If it is, change the default before running this command.
The CEV must not be associated with an RDS Custom DB instance, RDS Custom instance snapshot, or automated backup of your RDS Custom instance.
Typically, deletion takes a few minutes.
The MediaImport service that imports files from Amazon S3 to create CEVs isn't integrated with Amazon Web Services CloudTrail. If you turn on data logging for Amazon RDS in CloudTrail, calls to the DeleteCustomDbEngineVersion event aren't logged. However, you might see calls from the API gateway that accesses your Amazon S3 bucket. These calls originate from the MediaImport service for the DeleteCustomDbEngineVersion event.
For more information, see Deleting a CEV in the Amazon RDS User Guide.
", "DeleteDBCluster": "The DeleteDBCluster action deletes a previously provisioned DB cluster. When you delete a DB cluster, all automated backups for that DB cluster are deleted and can't be recovered. Manual DB cluster snapshots of the specified DB cluster are not deleted.
For more information on Amazon Aurora, see What is Amazon Aurora? in the Amazon Aurora User Guide.
For more information on Multi-AZ DB clusters, see Multi-AZ deployments with two readable standby DB instances in the Amazon RDS User Guide.
", @@ -75,7 +75,7 @@ "DescribeEngineDefaultParameters": "Returns the default engine and system parameter information for the specified database engine.
", "DescribeEventCategories": "Displays a list of categories for all event source types, or, if specified, for a specified source type. You can also see this list in the \"Amazon RDS event categories and event messages\" section of the Amazon RDS User Guide or the Amazon Aurora User Guide .
", "DescribeEventSubscriptions": "Lists all the subscription descriptions for a customer account. The description for a subscription includes SubscriptionName, SNSTopicARN, CustomerID, SourceType, SourceID, CreationTime, and Status.
If you specify a SubscriptionName, lists the description for that subscription.
Returns events related to DB instances, DB clusters, DB parameter groups, DB security groups, DB snapshots, DB cluster snapshots, and RDS Proxies for the past 14 days. Events specific to a particular DB instance, DB cluster, DB parameter group, DB security group, DB snapshot, DB cluster snapshot group, or RDS Proxy can be obtained by providing the name as a parameter.
By default, RDS returns events that were generated in the past hour.
Returns events related to DB instances, DB clusters, DB parameter groups, DB security groups, DB snapshots, DB cluster snapshots, and RDS Proxies for the past 14 days. Events specific to a particular DB instance, DB cluster, DB parameter group, DB security group, DB snapshot, DB cluster snapshot group, or RDS Proxy can be obtained by providing the name as a parameter.
For more information on working with events, see Monitoring Amazon RDS events in the Amazon RDS User Guide and Monitoring Amazon Aurora events in the Amazon Aurora User Guide.
By default, RDS returns events that were generated in the past hour.
Returns information about a snapshot export to Amazon S3. This API operation supports pagination.
", "DescribeGlobalClusters": "Returns information about Aurora global database clusters. This API supports pagination.
For more information on Amazon Aurora, see What is Amazon Aurora? in the Amazon Aurora User Guide.
This action only applies to Aurora DB clusters.
Describes all available options.
", @@ -87,7 +87,7 @@ "DescribeSourceRegions": "Returns a list of the source Amazon Web Services Regions where the current Amazon Web Services Region can create a read replica, copy a DB snapshot from, or replicate automated backups from. This API action supports pagination.
", "DescribeValidDBInstanceModifications": "You can call DescribeValidDBInstanceModifications to learn what modifications you can make to your DB instance. You can use this information when you call ModifyDBInstance.
This command doesn't apply to RDS Custom.
", "DownloadDBLogFilePortion": "Downloads all or a portion of the specified log file, up to 1 MB in size.
This command doesn't apply to RDS Custom.
", - "FailoverDBCluster": "Forces a failover for a DB cluster.
For an Aurora DB cluster, failover for a DB cluster promotes one of the Aurora Replicas (read-only instances) in the DB cluster to be the primary DB instance (the cluster writer).
For a Multi-AZ DB cluster, failover for a DB cluster promotes one of the readable standby DB instances (read-only instances) in the DB cluster to be the primary DB instance (the cluster writer).
An Amazon Aurora DB cluster automatically fails over to an Aurora Replica, if one exists, when the primary DB instance fails. A Multi-AZ DB cluster automatically fails over to a readbable standby DB instance when the primary DB instance fails.
To simulate a failure of a primary instance for testing, you can force a failover. Because each instance in a DB cluster has its own endpoint address, make sure to clean up and re-establish any existing connections that use those endpoint addresses when the failover is complete.
For more information on Amazon Aurora DB clusters, see What is Amazon Aurora? in the Amazon Aurora User Guide.
For more information on Multi-AZ DB clusters, see Multi-AZ deployments with two readable standby DB instances in the Amazon RDS User Guide.
", + "FailoverDBCluster": "Forces a failover for a DB cluster.
For an Aurora DB cluster, failover for a DB cluster promotes one of the Aurora Replicas (read-only instances) in the DB cluster to be the primary DB instance (the cluster writer).
For a Multi-AZ DB cluster, failover for a DB cluster promotes one of the readable standby DB instances (read-only instances) in the DB cluster to be the primary DB instance (the cluster writer).
An Amazon Aurora DB cluster automatically fails over to an Aurora Replica, if one exists, when the primary DB instance fails. A Multi-AZ DB cluster automatically fails over to a readable standby DB instance when the primary DB instance fails.
To simulate a failure of a primary instance for testing, you can force a failover. Because each instance in a DB cluster has its own endpoint address, make sure to clean up and re-establish any existing connections that use those endpoint addresses when the failover is complete.
For more information on Amazon Aurora DB clusters, see What is Amazon Aurora? in the Amazon Aurora User Guide.
For more information on Multi-AZ DB clusters, see Multi-AZ deployments with two readable standby DB instances in the Amazon RDS User Guide.
", "FailoverGlobalCluster": "Initiates the failover process for an Aurora global database (GlobalCluster).
A failover for an Aurora global database promotes one of secondary read-only DB clusters to be the primary DB cluster and demotes the primary DB cluster to being a secondary (read-only) DB cluster. In other words, the role of the current primary DB cluster and the selected (target) DB cluster are switched. The selected secondary DB cluster assumes full read/write capabilities for the Aurora global database.
For more information about failing over an Amazon Aurora global database, see Managed planned failover for Amazon Aurora global databases in the Amazon Aurora User Guide.
This action applies to GlobalCluster (Aurora global databases) only. Use this action only on healthy Aurora global databases with running Aurora DB clusters and no Region-wide outages, to test disaster recovery scenarios or to reconfigure your Aurora global database topology.
Lists all tags on an Amazon RDS resource.
For an overview on tagging an Amazon RDS resource, see Tagging Amazon RDS Resources in the Amazon RDS User Guide.
", "ModifyCertificates": "Override the system-default Secure Sockets Layer/Transport Layer Security (SSL/TLS) certificate for Amazon RDS for new DB instances, or remove the override.
By using this operation, you can specify an RDS-approved SSL/TLS certificate for new DB instances that is different from the default certificate provided by RDS. You can also use this operation to remove the override, so that new DB instances use the default certificate provided by RDS.
You might need to override the default certificate in the following situations:
You already migrated your applications to support the latest certificate authority (CA) certificate, but the new CA certificate is not yet the RDS default CA certificate for the specified Amazon Web Services Region.
RDS has already moved to a new default CA certificate for the specified Amazon Web Services Region, but you are still in the process of supporting the new CA certificate. In this case, you temporarily need additional time to finish your application changes.
For more information about rotating your SSL/TLS certificate for RDS DB engines, see Rotating Your SSL/TLS Certificate in the Amazon RDS User Guide.
For more information about rotating your SSL/TLS certificate for Aurora DB engines, see Rotating Your SSL/TLS Certificate in the Amazon Aurora User Guide.
", @@ -95,15 +95,15 @@ "ModifyCustomDBEngineVersion": "Modifies the status of a custom engine version (CEV). You can find CEVs to modify by calling DescribeDBEngineVersions.
The MediaImport service that imports files from Amazon S3 to create CEVs isn't integrated with Amazon Web Services CloudTrail. If you turn on data logging for Amazon RDS in CloudTrail, calls to the ModifyCustomDbEngineVersion event aren't logged. However, you might see calls from the API gateway that accesses your Amazon S3 bucket. These calls originate from the MediaImport service for the ModifyCustomDbEngineVersion event.
For more information, see Modifying CEV status in the Amazon RDS User Guide.
", "ModifyDBCluster": "Modify the settings for an Amazon Aurora DB cluster or a Multi-AZ DB cluster. You can change one or more settings by specifying these parameters and the new values in the request.
For more information on Amazon Aurora DB clusters, see What is Amazon Aurora? in the Amazon Aurora User Guide.
For more information on Multi-AZ DB clusters, see Multi-AZ deployments with two readable standby DB instances in the Amazon RDS User Guide.
", "ModifyDBClusterEndpoint": "Modifies the properties of an endpoint in an Amazon Aurora DB cluster.
This action only applies to Aurora DB clusters.
Modifies the parameters of a DB cluster parameter group. To modify more than one parameter, submit a list of the following: ParameterName, ParameterValue, and ApplyMethod. A maximum of 20 parameters can be modified in a single request.
After you create a DB cluster parameter group, you should wait at least 5 minutes before creating your first DB cluster that uses that DB cluster parameter group as the default parameter group. This allows Amazon RDS to fully complete the create action before the parameter group is used as the default for a new DB cluster. This is especially important for parameters that are critical when creating the default database for a DB cluster, such as the character set for the default database defined by the character_set_database parameter. You can use the Parameter Groups option of the Amazon RDS console or the DescribeDBClusterParameters action to verify that your DB cluster parameter group has been created or modified.
If the modified DB cluster parameter group is used by an Aurora Serverless v1 cluster, Aurora applies the update immediately. The cluster restart might interrupt your workload. In that case, your application must reopen any connections and retry any transactions that were active when the parameter changes took effect.
For more information on Amazon Aurora DB clusters, see What is Amazon Aurora? in the Amazon Aurora User Guide.
For more information on Multi-AZ DB clusters, see Multi-AZ deployments with two readable standby DB instances in the Amazon RDS User Guide.
", - "ModifyDBClusterSnapshotAttribute": "Adds an attribute and values to, or removes an attribute and values from, a manual DB cluster snapshot.
To share a manual DB cluster snapshot with other Amazon Web Services accounts, specify restore as the AttributeName and use the ValuesToAdd parameter to add a list of IDs of the Amazon Web Services accounts that are authorized to restore the manual DB cluster snapshot. Use the value all to make the manual DB cluster snapshot public, which means that it can be copied or restored by all Amazon Web Services accounts.
Don't add the all value for any manual DB cluster snapshots that contain private information that you don't want available to all Amazon Web Services accounts.
If a manual DB cluster snapshot is encrypted, it can be shared, but only by specifying a list of authorized Amazon Web Services account IDs for the ValuesToAdd parameter. You can't use all as a value for that parameter in this case.
To view which Amazon Web Services accounts have access to copy or restore a manual DB cluster snapshot, or whether a manual DB cluster snapshot is public or private, use the DescribeDBClusterSnapshotAttributes API action. The accounts are returned as values for the restore attribute.
Modifies the parameters of a DB cluster parameter group. To modify more than one parameter, submit a list of the following: ParameterName, ParameterValue, and ApplyMethod. A maximum of 20 parameters can be modified in a single request.
After you create a DB cluster parameter group, you should wait at least 5 minutes before creating your first DB cluster that uses that DB cluster parameter group as the default parameter group. This allows Amazon RDS to fully complete the create action before the parameter group is used as the default for a new DB cluster. This is especially important for parameters that are critical when creating the default database for a DB cluster, such as the character set for the default database defined by the character_set_database parameter. You can use the Parameter Groups option of the Amazon RDS console or the DescribeDBClusterParameters operation to verify that your DB cluster parameter group has been created or modified.
If the modified DB cluster parameter group is used by an Aurora Serverless v1 cluster, Aurora applies the update immediately. The cluster restart might interrupt your workload. In that case, your application must reopen any connections and retry any transactions that were active when the parameter changes took effect.
For more information on Amazon Aurora DB clusters, see What is Amazon Aurora? in the Amazon Aurora User Guide.
For more information on Multi-AZ DB clusters, see Multi-AZ deployments with two readable standby DB instances in the Amazon RDS User Guide.
", + "ModifyDBClusterSnapshotAttribute": "Adds an attribute and values to, or removes an attribute and values from, a manual DB cluster snapshot.
To share a manual DB cluster snapshot with other Amazon Web Services accounts, specify restore as the AttributeName and use the ValuesToAdd parameter to add a list of IDs of the Amazon Web Services accounts that are authorized to restore the manual DB cluster snapshot. Use the value all to make the manual DB cluster snapshot public, which means that it can be copied or restored by all Amazon Web Services accounts.
Don't add the all value for any manual DB cluster snapshots that contain private information that you don't want available to all Amazon Web Services accounts.
If a manual DB cluster snapshot is encrypted, it can be shared, but only by specifying a list of authorized Amazon Web Services account IDs for the ValuesToAdd parameter. You can't use all as a value for that parameter in this case.
To view which Amazon Web Services accounts have access to copy or restore a manual DB cluster snapshot, or whether a manual DB cluster snapshot is public or private, use the DescribeDBClusterSnapshotAttributes API operation. The accounts are returned as values for the restore attribute.
Modifies settings for a DB instance. You can change one or more database configuration parameters by specifying these parameters and the new values in the request. To learn what modifications you can make to your DB instance, call DescribeValidDBInstanceModifications before you call ModifyDBInstance.
Modifies the parameters of a DB parameter group. To modify more than one parameter, submit a list of the following: ParameterName, ParameterValue, and ApplyMethod. A maximum of 20 parameters can be modified in a single request.
After you modify a DB parameter group, you should wait at least 5 minutes before creating your first DB instance that uses that DB parameter group as the default parameter group. This allows Amazon RDS to fully complete the modify action before the parameter group is used as the default for a new DB instance. This is especially important for parameters that are critical when creating the default database for a DB instance, such as the character set for the default database defined by the character_set_database parameter. You can use the Parameter Groups option of the Amazon RDS console or the DescribeDBParameters command to verify that your DB parameter group has been created or modified.
Changes the settings for an existing DB proxy.
", "ModifyDBProxyEndpoint": "Changes the settings for an existing DB proxy endpoint.
", "ModifyDBProxyTargetGroup": "Modifies the properties of a DBProxyTargetGroup.
Updates a manual DB snapshot with a new engine version. The snapshot can be encrypted or unencrypted, but not shared or public.
Amazon RDS supports upgrading DB snapshots for MySQL, PostgreSQL, and Oracle. This command doesn't apply to RDS Custom.
", - "ModifyDBSnapshotAttribute": "Adds an attribute and values to, or removes an attribute and values from, a manual DB snapshot.
To share a manual DB snapshot with other Amazon Web Services accounts, specify restore as the AttributeName and use the ValuesToAdd parameter to add a list of IDs of the Amazon Web Services accounts that are authorized to restore the manual DB snapshot. Uses the value all to make the manual DB snapshot public, which means it can be copied or restored by all Amazon Web Services accounts.
Don't add the all value for any manual DB snapshots that contain private information that you don't want available to all Amazon Web Services accounts.
If the manual DB snapshot is encrypted, it can be shared, but only by specifying a list of authorized Amazon Web Services account IDs for the ValuesToAdd parameter. You can't use all as a value for that parameter in this case.
To view which Amazon Web Services accounts have access to copy or restore a manual DB snapshot, or whether a manual DB snapshot public or private, use the DescribeDBSnapshotAttributes API action. The accounts are returned as values for the restore attribute.
Adds an attribute and values to, or removes an attribute and values from, a manual DB snapshot.
To share a manual DB snapshot with other Amazon Web Services accounts, specify restore as the AttributeName and use the ValuesToAdd parameter to add a list of IDs of the Amazon Web Services accounts that are authorized to restore the manual DB snapshot. Uses the value all to make the manual DB snapshot public, which means it can be copied or restored by all Amazon Web Services accounts.
Don't add the all value for any manual DB snapshots that contain private information that you don't want available to all Amazon Web Services accounts.
If the manual DB snapshot is encrypted, it can be shared, but only by specifying a list of authorized Amazon Web Services account IDs for the ValuesToAdd parameter. You can't use all as a value for that parameter in this case.
To view which Amazon Web Services accounts have access to copy or restore a manual DB snapshot, or whether a manual DB snapshot public or private, use the DescribeDBSnapshotAttributes API operation. The accounts are returned as values for the restore attribute.
Modifies an existing DB subnet group. DB subnet groups must contain at least one subnet in at least two AZs in the Amazon Web Services Region.
", "ModifyEventSubscription": "Modifies an existing RDS event notification subscription. You can't modify the source identifiers using this call. To change source identifiers for a subscription, use the AddSourceIdentifierToSubscription and RemoveSourceIdentifierFromSubscription calls.
You can see a list of the event categories for a given source type (SourceType) in Events in the Amazon RDS User Guide or by using the DescribeEventCategories operation.
Modify a setting for an Amazon Aurora global cluster. You can change one or more database configuration parameters by specifying these parameters and the new values in the request. For more information on Amazon Aurora, see What is Amazon Aurora? in the Amazon Aurora User Guide.
This action only applies to Aurora DB clusters.
Stops a database activity stream that was started using the Amazon Web Services console, the start-activity-stream CLI command, or the StartActivityStream action.
For more information, see Database Activity Streams in the Amazon Aurora User Guide.
", "StopDBCluster": "Stops an Amazon Aurora DB cluster. When you stop a DB cluster, Aurora retains the DB cluster's metadata, including its endpoints and DB parameter groups. Aurora also retains the transaction logs so you can do a point-in-time restore if necessary.
For more information, see Stopping and Starting an Aurora Cluster in the Amazon Aurora User Guide.
This action only applies to Aurora DB clusters.
Stops an Amazon RDS DB instance. When you stop a DB instance, Amazon RDS retains the DB instance's metadata, including its endpoint, DB parameter group, and option group membership. Amazon RDS also retains the transaction logs so you can do a point-in-time restore if necessary.
For more information, see Stopping an Amazon RDS DB Instance Temporarily in the Amazon RDS User Guide.
This command doesn't apply to RDS Custom, Aurora MySQL, and Aurora PostgreSQL. For Aurora clusters, use StopDBCluster instead.
Stops automated backup replication for a DB instance.
This command doesn't apply to RDS Custom.
For more information, see Replicating Automated Backups to Another Amazon Web Services Region in the Amazon RDS User Guide.
" + "StopDBInstanceAutomatedBackupsReplication": "Stops automated backup replication for a DB instance.
This command doesn't apply to RDS Custom, Aurora MySQL, and Aurora PostgreSQL.
For more information, see Replicating Automated Backups to Another Amazon Web Services Region in the Amazon RDS User Guide.
" }, "shapes": { "AccountAttributesMessage": { @@ -419,7 +419,7 @@ "CopyDBClusterSnapshotMessage$CopyTags": "A value that indicates whether to copy all tags from the source DB cluster snapshot to the target DB cluster snapshot. By default, tags are not copied.
", "CopyDBSnapshotMessage$CopyTags": "A value that indicates whether to copy all tags from the source DB snapshot to the target DB snapshot. By default, tags are not copied.
", "CreateDBClusterMessage$StorageEncrypted": "A value that indicates whether the DB cluster is encrypted.
Valid for: Aurora DB clusters and Multi-AZ DB clusters
", - "CreateDBClusterMessage$EnableIAMDatabaseAuthentication": "A value that indicates whether to enable mapping of Amazon Web Services Identity and Access Management (IAM) accounts to database accounts. By default, mapping isn't enabled.
For more information, see IAM Database Authentication in the Amazon Aurora User Guide..
Valid for: Aurora DB clusters only
", + "CreateDBClusterMessage$EnableIAMDatabaseAuthentication": "A value that indicates whether to enable mapping of Amazon Web Services Identity and Access Management (IAM) accounts to database accounts. By default, mapping isn't enabled.
For more information, see IAM Database Authentication in the Amazon Aurora User Guide.
Valid for: Aurora DB clusters only
", "CreateDBClusterMessage$DeletionProtection": "A value that indicates whether the DB cluster has deletion protection enabled. The database can't be deleted when deletion protection is enabled. By default, deletion protection isn't enabled.
Valid for: Aurora DB clusters and Multi-AZ DB clusters
", "CreateDBClusterMessage$EnableHttpEndpoint": "A value that indicates whether to enable the HTTP endpoint for an Aurora Serverless v1 DB cluster. By default, the HTTP endpoint is disabled.
When enabled, the HTTP endpoint provides a connectionless web service API for running SQL queries on the Aurora Serverless v1 DB cluster. You can also query your database from inside the RDS console with the query editor.
For more information, see Using the Data API for Aurora Serverless v1 in the Amazon Aurora User Guide.
Valid for: Aurora DB clusters only
", "CreateDBClusterMessage$CopyTagsToSnapshot": "A value that indicates whether to copy all tags from the DB cluster to snapshots of the DB cluster. The default is not to copy them.
Valid for: Aurora DB clusters and Multi-AZ DB clusters
", @@ -427,12 +427,12 @@ "CreateDBClusterMessage$PubliclyAccessible": "A value that indicates whether the DB cluster is publicly accessible.
When the DB cluster is publicly accessible, its Domain Name System (DNS) endpoint resolves to the private IP address from within the DB cluster's virtual private cloud (VPC). It resolves to the public IP address from outside of the DB cluster's VPC. Access to the DB cluster is ultimately controlled by the security group it uses. That public access isn't permitted if the security group assigned to the DB cluster doesn't permit it.
When the DB cluster isn't publicly accessible, it is an internal DB cluster with a DNS name that resolves to a private IP address.
Default: The default behavior varies depending on whether DBSubnetGroupName is specified.
If DBSubnetGroupName isn't specified, and PubliclyAccessible isn't specified, the following applies:
If the default VPC in the target Region doesn’t have an internet gateway attached to it, the DB cluster is private.
If the default VPC in the target Region has an internet gateway attached to it, the DB cluster is public.
If DBSubnetGroupName is specified, and PubliclyAccessible isn't specified, the following applies:
If the subnets are part of a VPC that doesn’t have an internet gateway attached to it, the DB cluster is private.
If the subnets are part of a VPC that has an internet gateway attached to it, the DB cluster is public.
Valid for: Multi-AZ DB clusters only
", "CreateDBClusterMessage$AutoMinorVersionUpgrade": "A value that indicates whether minor engine upgrades are applied automatically to the DB cluster during the maintenance window. By default, minor engine upgrades are applied automatically.
Valid for: Multi-AZ DB clusters only
", "CreateDBClusterMessage$EnablePerformanceInsights": "A value that indicates whether to turn on Performance Insights for the DB cluster.
For more information, see Using Amazon Performance Insights in the Amazon RDS User Guide.
Valid for: Multi-AZ DB clusters only
", - "CreateDBInstanceMessage$MultiAZ": "A value that indicates whether the DB instance is a Multi-AZ deployment. You can't set the AvailabilityZone parameter if the DB instance is a Multi-AZ deployment.
This setting doesn't apply to RDS Custom.
", + "CreateDBInstanceMessage$MultiAZ": "A value that indicates whether the DB instance is a Multi-AZ deployment. You can't set the AvailabilityZone parameter if the DB instance is a Multi-AZ deployment.
This setting doesn't apply to RDS Custom.
Amazon Aurora
Not applicable. DB instance Availability Zones (AZs) are managed by the DB cluster.
", "CreateDBInstanceMessage$AutoMinorVersionUpgrade": "A value that indicates whether minor engine upgrades are applied automatically to the DB instance during the maintenance window. By default, minor engine upgrades are applied automatically.
If you create an RDS Custom DB instance, you must set AutoMinorVersionUpgrade to false.
A value that indicates whether the DB instance is publicly accessible.
When the DB instance is publicly accessible, its Domain Name System (DNS) endpoint resolves to the private IP address from within the DB instance's virtual private cloud (VPC). It resolves to the public IP address from outside of the DB instance's VPC. Access to the DB instance is ultimately controlled by the security group it uses. That public access is not permitted if the security group assigned to the DB instance doesn't permit it.
When the DB instance isn't publicly accessible, it is an internal DB instance with a DNS name that resolves to a private IP address.
Default: The default behavior varies depending on whether DBSubnetGroupName is specified.
If DBSubnetGroupName isn't specified, and PubliclyAccessible isn't specified, the following applies:
If the default VPC in the target Region doesn’t have an internet gateway attached to it, the DB instance is private.
If the default VPC in the target Region has an internet gateway attached to it, the DB instance is public.
If DBSubnetGroupName is specified, and PubliclyAccessible isn't specified, the following applies:
If the subnets are part of a VPC that doesn’t have an internet gateway attached to it, the DB instance is private.
If the subnets are part of a VPC that has an internet gateway attached to it, the DB instance is public.
A value that indicates whether the DB instance is encrypted. By default, it isn't encrypted.
For RDS Custom instances, either set this parameter to true or leave it unset. If you set this parameter to false, RDS reports an error.
Amazon Aurora
Not applicable. The encryption for DB instances is managed by the DB cluster.
", "CreateDBInstanceMessage$CopyTagsToSnapshot": "A value that indicates whether to copy tags from the DB instance to snapshots of the DB instance. By default, tags are not copied.
Amazon Aurora
Not applicable. Copying tags to snapshots is managed by the DB cluster. Setting this value for an Aurora DB instance has no effect on the DB cluster setting.
", - "CreateDBInstanceMessage$EnableIAMDatabaseAuthentication": "A value that indicates whether to enable mapping of Amazon Web Services Identity and Access Management (IAM) accounts to database accounts. By default, mapping isn't enabled.
This setting doesn't apply to RDS Custom or Amazon Aurora. In Aurora, mapping Amazon Web Services IAM accounts to database accounts is managed by the DB cluster.
For more information, see IAM Database Authentication for MySQL and PostgreSQL in the Amazon RDS User Guide.
", + "CreateDBInstanceMessage$EnableIAMDatabaseAuthentication": "A value that indicates whether to enable mapping of Amazon Web Services Identity and Access Management (IAM) accounts to database accounts. By default, mapping isn't enabled.
For more information, see IAM Database Authentication for MySQL and PostgreSQL in the Amazon RDS User Guide.
This setting doesn't apply to RDS Custom.
Amazon Aurora
Not applicable. Mapping Amazon Web Services IAM accounts to database accounts is managed by the DB cluster.
", "CreateDBInstanceMessage$EnablePerformanceInsights": "A value that indicates whether to enable Performance Insights for the DB instance. For more information, see Using Amazon Performance Insights in the Amazon RDS User Guide.
This setting doesn't apply to RDS Custom.
", "CreateDBInstanceMessage$DeletionProtection": "A value that indicates whether the DB instance has deletion protection enabled. The database can't be deleted when deletion protection is enabled. By default, deletion protection isn't enabled. For more information, see Deleting a DB Instance.
Amazon Aurora
Not applicable. You can enable or disable deletion protection for the DB cluster. For more information, see CreateDBCluster. DB instances in a DB cluster can be deleted even when deletion protection is enabled for the DB cluster.
A value that indicates whether to enable a customer-owned IP address (CoIP) for an RDS on Outposts DB instance.
A CoIP provides local or external connectivity to resources in your Outpost subnets through your on-premises network. For some use cases, a CoIP can provide lower latency for connections to the DB instance from outside of its virtual private cloud (VPC) on your local network.
For more information about RDS on Outposts, see Working with Amazon RDS on Amazon Web Services Outposts in the Amazon RDS User Guide.
For more information about CoIPs, see Customer-owned IP addresses in the Amazon Web Services Outposts User Guide.
", @@ -481,7 +481,7 @@ "ModifyDBInstanceMessage$CopyTagsToSnapshot": "A value that indicates whether to copy all tags from the DB instance to snapshots of the DB instance. By default, tags are not copied.
Amazon Aurora
Not applicable. Copying tags to snapshots is managed by the DB cluster. Setting this value for an Aurora DB instance has no effect on the DB cluster setting. For more information, see ModifyDBCluster.
A value that indicates whether the DB instance is publicly accessible.
When the DB cluster is publicly accessible, its Domain Name System (DNS) endpoint resolves to the private IP address from within the DB cluster's virtual private cloud (VPC). It resolves to the public IP address from outside of the DB cluster's VPC. Access to the DB cluster is ultimately controlled by the security group it uses. That public access isn't permitted if the security group assigned to the DB cluster doesn't permit it.
When the DB instance isn't publicly accessible, it is an internal DB instance with a DNS name that resolves to a private IP address.
PubliclyAccessible only applies to DB instances in a VPC. The DB instance must be part of a public subnet and PubliclyAccessible must be enabled for it to be publicly accessible.
Changes to the PubliclyAccessible parameter are applied immediately regardless of the value of the ApplyImmediately parameter.
A value that indicates whether to enable mapping of Amazon Web Services Identity and Access Management (IAM) accounts to database accounts. By default, mapping isn't enabled.
This setting doesn't apply to Amazon Aurora. Mapping Amazon Web Services IAM accounts to database accounts is managed by the DB cluster.
For more information about IAM database authentication, see IAM Database Authentication for MySQL and PostgreSQL in the Amazon RDS User Guide.
This setting doesn't apply to RDS Custom.
", - "ModifyDBInstanceMessage$EnablePerformanceInsights": "A value that indicates whether to enable Performance Insights for the DB instance.
For more information, see Using Amazon Performance Insights in the Amazon RDS User Guide..
This setting doesn't apply to RDS Custom.
", + "ModifyDBInstanceMessage$EnablePerformanceInsights": "A value that indicates whether to enable Performance Insights for the DB instance.
For more information, see Using Amazon Performance Insights in the Amazon RDS User Guide.
This setting doesn't apply to RDS Custom.
", "ModifyDBInstanceMessage$UseDefaultProcessorFeatures": "A value that indicates whether the DB instance class of the DB instance uses its default processor features.
This setting doesn't apply to RDS Custom.
", "ModifyDBInstanceMessage$DeletionProtection": "A value that indicates whether the DB instance has deletion protection enabled. The database can't be deleted when deletion protection is enabled. By default, deletion protection isn't enabled. For more information, see Deleting a DB Instance.
", "ModifyDBInstanceMessage$CertificateRotationRestart": "A value that indicates whether the DB instance is restarted when you rotate your SSL/TLS certificate.
By default, the DB instance is restarted when you rotate your SSL/TLS certificate. The certificate is not updated until the DB instance is restarted.
Set this parameter only if you are not using SSL/TLS to connect to the DB instance.
If you are using SSL/TLS to connect to the DB instance, follow the appropriate instructions for your DB engine to rotate your SSL/TLS certificate:
For more information about rotating your SSL/TLS certificate for RDS DB engines, see Rotating Your SSL/TLS Certificate. in the Amazon RDS User Guide.
For more information about rotating your SSL/TLS certificate for Aurora DB engines, see Rotating Your SSL/TLS Certificate in the Amazon Aurora User Guide.
This setting doesn't apply to RDS Custom.
", @@ -523,7 +523,7 @@ "RestoreDBInstanceFromS3Message$StorageEncrypted": "A value that indicates whether the new DB instance is encrypted or not.
", "RestoreDBInstanceFromS3Message$CopyTagsToSnapshot": "A value that indicates whether to copy all tags from the DB instance to snapshots of the DB instance. By default, tags are not copied.
", "RestoreDBInstanceFromS3Message$EnableIAMDatabaseAuthentication": "A value that indicates whether to enable mapping of Amazon Web Services Identity and Access Management (IAM) accounts to database accounts. By default, mapping isn't enabled.
For more information about IAM database authentication, see IAM Database Authentication for MySQL and PostgreSQL in the Amazon RDS User Guide.
", - "RestoreDBInstanceFromS3Message$EnablePerformanceInsights": "A value that indicates whether to enable Performance Insights for the DB instance.
For more information, see Using Amazon Performance Insights in the Amazon RDS User Guide..
", + "RestoreDBInstanceFromS3Message$EnablePerformanceInsights": "A value that indicates whether to enable Performance Insights for the DB instance.
For more information, see Using Amazon Performance Insights in the Amazon RDS User Guide.
", "RestoreDBInstanceFromS3Message$UseDefaultProcessorFeatures": "A value that indicates whether the DB instance class of the DB instance uses its default processor features.
", "RestoreDBInstanceFromS3Message$DeletionProtection": "A value that indicates whether the DB instance has deletion protection enabled. The database can't be deleted when deletion protection is enabled. By default, deletion protection isn't enabled. For more information, see Deleting a DB Instance.
", "RestoreDBInstanceToPointInTimeMessage$MultiAZ": "A value that indicates whether the DB instance is a Multi-AZ deployment.
This setting doesn't apply to RDS Custom.
Constraint: You can't specify the AvailabilityZone parameter if the DB instance is a Multi-AZ deployment.
A list of DB security groups to associate with this DB instance.
Default: The default DB security group for the database engine.
", + "CreateDBInstanceMessage$DBSecurityGroups": "A list of DB security groups to associate with this DB instance.
This setting applies to the legacy EC2-Classic platform, which is no longer used to create new DB instances. Use the VpcSecurityGroupIds setting instead.
A list of DB security groups to authorize on this DB instance. Changing this setting doesn't result in an outage and the change is asynchronously applied as soon as possible.
This setting doesn't apply to RDS Custom.
Constraints:
If supplied, must match existing DBSecurityGroups.
A list of DBSecurityGroupMembership name strings used for this option.
", "RestoreDBInstanceFromS3Message$DBSecurityGroups": "A list of DB security groups to associate with this DB instance.
Default: The default DB security group for the database engine.
" @@ -2089,7 +2089,7 @@ } }, "Event": { - "base": "This data type is used as a response element in the DescribeEvents action.
This data type is used as a response element in the DescribeEvents action.
", "refs": { "EventList$member": null } @@ -2106,7 +2106,7 @@ } }, "EventCategoriesMap": { - "base": "Contains the results of a successful invocation of the DescribeEventCategories operation.
Contains the results of a successful invocation of the DescribeEventCategories operation.
", "refs": { "EventCategoriesMapList$member": null } @@ -2427,19 +2427,19 @@ "CreateDBClusterMessage$AllocatedStorage": "The amount of storage in gibibytes (GiB) to allocate to each DB instance in the Multi-AZ DB cluster.
This setting is required to create a Multi-AZ DB cluster.
Valid for: Multi-AZ DB clusters only
", "CreateDBClusterMessage$Iops": "The amount of Provisioned IOPS (input/output operations per second) to be initially allocated for each DB instance in the Multi-AZ DB cluster.
For information about valid Iops values, see Amazon RDS Provisioned IOPS storage to improve performance in the Amazon RDS User Guide.
This setting is required to create a Multi-AZ DB cluster.
Constraints: Must be a multiple between .5 and 50 of the storage amount for the DB cluster.
Valid for: Multi-AZ DB clusters only
", "CreateDBClusterMessage$MonitoringInterval": "The interval, in seconds, between points when Enhanced Monitoring metrics are collected for the DB cluster. To turn off collecting Enhanced Monitoring metrics, specify 0. The default is 0.
If MonitoringRoleArn is specified, also set MonitoringInterval to a value other than 0.
Valid Values: 0, 1, 5, 10, 15, 30, 60
Valid for: Multi-AZ DB clusters only
", - "CreateDBClusterMessage$PerformanceInsightsRetentionPeriod": "The amount of time, in days, to retain Performance Insights data. Valid values are 7 or 731 (2 years).
Valid for: Multi-AZ DB clusters only
", + "CreateDBClusterMessage$PerformanceInsightsRetentionPeriod": "The number of days to retain Performance Insights data. The default is 7 days. The following values are valid:
7
month * 31, where month is a number of months from 1-23
731
For example, the following values are valid:
93 (3 months * 31)
341 (11 months * 31)
589 (19 months * 31)
731
If you specify a retention period such as 94, which isn't a valid value, RDS issues an error.
Valid for: Multi-AZ DB clusters only
", "CreateDBInstanceMessage$AllocatedStorage": "The amount of storage in gibibytes (GiB) to allocate for the DB instance.
Type: Integer
Amazon Aurora
Not applicable. Aurora cluster volumes automatically grow as the amount of data in your database increases, though you are only charged for the space that you use in an Aurora cluster volume.
Amazon RDS Custom
Constraints to the amount of storage for each storage type are the following:
General Purpose (SSD) storage (gp2): Must be an integer from 40 to 65536 for RDS Custom for Oracle, 16384 for RDS Custom for SQL Server.
Provisioned IOPS storage (io1): Must be an integer from 40 to 65536 for RDS Custom for Oracle, 16384 for RDS Custom for SQL Server.
MySQL
Constraints to the amount of storage for each storage type are the following:
General Purpose (SSD) storage (gp2): Must be an integer from 20 to 65536.
Provisioned IOPS storage (io1): Must be an integer from 100 to 65536.
Magnetic storage (standard): Must be an integer from 5 to 3072.
MariaDB
Constraints to the amount of storage for each storage type are the following:
General Purpose (SSD) storage (gp2): Must be an integer from 20 to 65536.
Provisioned IOPS storage (io1): Must be an integer from 100 to 65536.
Magnetic storage (standard): Must be an integer from 5 to 3072.
PostgreSQL
Constraints to the amount of storage for each storage type are the following:
General Purpose (SSD) storage (gp2): Must be an integer from 20 to 65536.
Provisioned IOPS storage (io1): Must be an integer from 100 to 65536.
Magnetic storage (standard): Must be an integer from 5 to 3072.
Oracle
Constraints to the amount of storage for each storage type are the following:
General Purpose (SSD) storage (gp2): Must be an integer from 20 to 65536.
Provisioned IOPS storage (io1): Must be an integer from 100 to 65536.
Magnetic storage (standard): Must be an integer from 10 to 3072.
SQL Server
Constraints to the amount of storage for each storage type are the following:
General Purpose (SSD) storage (gp2):
Enterprise and Standard editions: Must be an integer from 20 to 16384.
Web and Express editions: Must be an integer from 20 to 16384.
Provisioned IOPS storage (io1):
Enterprise and Standard editions: Must be an integer from 100 to 16384.
Web and Express editions: Must be an integer from 100 to 16384.
Magnetic storage (standard):
Enterprise and Standard editions: Must be an integer from 20 to 1024.
Web and Express editions: Must be an integer from 20 to 1024.
The number of days for which automated backups are retained. Setting this parameter to a positive number enables backups. Setting this parameter to 0 disables automated backups.
Amazon Aurora
Not applicable. The retention period for automated backups is managed by the DB cluster.
Default: 1
Constraints:
Must be a value from 0 to 35
Can't be set to 0 if the DB instance is a source to read replicas
Can't be set to 0 or 35 for an RDS Custom for Oracle DB instance
The number of days for which automated backups are retained. Setting this parameter to a positive number enables backups. Setting this parameter to 0 disables automated backups.
Amazon Aurora
Not applicable. The retention period for automated backups is managed by the DB cluster.
Default: 1
Constraints:
Must be a value from 0 to 35
Can't be set to 0 if the DB instance is a source to read replicas
Can't be set to 0 for an RDS Custom for Oracle DB instance
The port number on which the database accepts connections.
MySQL
Default: 3306
Valid values: 1150-65535
Type: Integer
MariaDB
Default: 3306
Valid values: 1150-65535
Type: Integer
PostgreSQL
Default: 5432
Valid values: 1150-65535
Type: Integer
Oracle
Default: 1521
Valid values: 1150-65535
SQL Server
Default: 1433
Valid values: 1150-65535 except 1234, 1434, 3260, 3343, 3389, 47001, and 49152-49156.
Amazon Aurora
Default: 3306
Valid values: 1150-65535
Type: Integer
", - "CreateDBInstanceMessage$Iops": "The amount of Provisioned IOPS (input/output operations per second) to be initially allocated for the DB instance. For information about valid Iops values, see Amazon RDS Provisioned IOPS storage to improve performance in the Amazon RDS User Guide.
Constraints: For MariaDB, MySQL, Oracle, and PostgreSQL DB instances, must be a multiple between .5 and 50 of the storage amount for the DB instance. For SQL Server DB instances, must be a multiple between 1 and 50 of the storage amount for the DB instance.
", + "CreateDBInstanceMessage$Iops": "The amount of Provisioned IOPS (input/output operations per second) to be initially allocated for the DB instance. For information about valid Iops values, see Amazon RDS Provisioned IOPS storage to improve performance in the Amazon RDS User Guide.
Constraints: For MariaDB, MySQL, Oracle, and PostgreSQL DB instances, must be a multiple between .5 and 50 of the storage amount for the DB instance. For SQL Server DB instances, must be a multiple between 1 and 50 of the storage amount for the DB instance.
Amazon Aurora
Not applicable. Storage is managed by the DB cluster.
", "CreateDBInstanceMessage$MonitoringInterval": "The interval, in seconds, between points when Enhanced Monitoring metrics are collected for the DB instance. To disable collection of Enhanced Monitoring metrics, specify 0. The default is 0.
If MonitoringRoleArn is specified, then you must set MonitoringInterval to a value other than 0.
This setting doesn't apply to RDS Custom.
Valid Values: 0, 1, 5, 10, 15, 30, 60
A value that specifies the order in which an Aurora Replica is promoted to the primary instance after a failure of the existing primary instance. For more information, see Fault Tolerance for an Aurora DB Cluster in the Amazon Aurora User Guide.
This setting doesn't apply to RDS Custom.
Default: 1
Valid Values: 0 - 15
", - "CreateDBInstanceMessage$PerformanceInsightsRetentionPeriod": "The amount of time, in days, to retain Performance Insights data. Valid values are 7 or 731 (2 years).
This setting doesn't apply to RDS Custom.
", - "CreateDBInstanceMessage$MaxAllocatedStorage": "The upper limit in gibibytes (GiB) to which Amazon RDS can automatically scale the storage of the DB instance.
For more information about this setting, including limitations that apply to it, see Managing capacity automatically with Amazon RDS storage autoscaling in the Amazon RDS User Guide.
This setting doesn't apply to RDS Custom.
", + "CreateDBInstanceMessage$PerformanceInsightsRetentionPeriod": "The number of days to retain Performance Insights data. The default is 7 days. The following values are valid:
7
month * 31, where month is a number of months from 1-23
731
For example, the following values are valid:
93 (3 months * 31)
341 (11 months * 31)
589 (19 months * 31)
731
If you specify a retention period such as 94, which isn't a valid value, RDS issues an error.
This setting doesn't apply to RDS Custom.
", + "CreateDBInstanceMessage$MaxAllocatedStorage": "The upper limit in gibibytes (GiB) to which Amazon RDS can automatically scale the storage of the DB instance.
For more information about this setting, including limitations that apply to it, see Managing capacity automatically with Amazon RDS storage autoscaling in the Amazon RDS User Guide.
This setting doesn't apply to RDS Custom.
Amazon Aurora
Not applicable. Storage is managed by the DB cluster.
", "CreateDBInstanceReadReplicaMessage$Port": "The port number that the DB instance uses for connections.
Default: Inherits from the source DB instance
Valid Values: 1150-65535
The amount of Provisioned IOPS (input/output operations per second) to be initially allocated for the DB instance.
", "CreateDBInstanceReadReplicaMessage$MonitoringInterval": "The interval, in seconds, between points when Enhanced Monitoring metrics are collected for the read replica. To disable collecting Enhanced Monitoring metrics, specify 0. The default is 0.
If MonitoringRoleArn is specified, then you must also set MonitoringInterval to a value other than 0.
This setting doesn't apply to RDS Custom.
Valid Values: 0, 1, 5, 10, 15, 30, 60
The amount of time, in days, to retain Performance Insights data. Valid values are 7 or 731 (2 years).
This setting doesn't apply to RDS Custom.
", + "CreateDBInstanceReadReplicaMessage$PerformanceInsightsRetentionPeriod": "The number of days to retain Performance Insights data. The default is 7 days. The following values are valid:
7
month * 31, where month is a number of months from 1-23
731
For example, the following values are valid:
93 (3 months * 31)
341 (11 months * 31)
589 (19 months * 31)
731
If you specify a retention period such as 94, which isn't a valid value, RDS issues an error.
This setting doesn't apply to RDS Custom.
", "CreateDBInstanceReadReplicaMessage$MaxAllocatedStorage": "The upper limit in gibibytes (GiB) to which Amazon RDS can automatically scale the storage of the DB instance.
For more information about this setting, including limitations that apply to it, see Managing capacity automatically with Amazon RDS storage autoscaling in the Amazon RDS User Guide.
", "CreateDBProxyRequest$IdleClientTimeout": "The number of seconds that a connection to the proxy can be inactive before the proxy disconnects it. You can set this value higher or lower than the connection timeout limit for the associated database.
", "DBCluster$AllocatedStorage": "For all database engines except Amazon Aurora, AllocatedStorage specifies the allocated storage size in gibibytes (GiB). For Aurora, AllocatedStorage always returns 1, because Aurora DB cluster storage size isn't fixed, but instead automatically adjusts as needed.
The current capacity of an Aurora Serverless v1 DB cluster. The capacity is 0 (zero) when the cluster is paused.
For more information about Aurora Serverless v1, see Using Amazon Aurora Serverless v1 in the Amazon Aurora User Guide.
", "DBCluster$Iops": "The Provisioned IOPS (I/O operations per second) value.
This setting is only for non-Aurora Multi-AZ DB clusters.
", "DBCluster$MonitoringInterval": "The interval, in seconds, between points when Enhanced Monitoring metrics are collected for the DB cluster.
This setting is only for non-Aurora Multi-AZ DB clusters.
", - "DBCluster$PerformanceInsightsRetentionPeriod": "The amount of time, in days, to retain Performance Insights data. Valid values are 7 or 731 (2 years).
This setting is only for non-Aurora Multi-AZ DB clusters.
", + "DBCluster$PerformanceInsightsRetentionPeriod": "The number of days to retain Performance Insights data. The default is 7 days. The following values are valid:
7
month * 31, where month is a number of months from 1-23
731
For example, the following values are valid:
93 (3 months * 31)
341 (11 months * 31)
589 (19 months * 31)
731
This setting is only for non-Aurora Multi-AZ DB clusters.
", "DBClusterCapacityInfo$PendingCapacity": "A value that specifies the capacity that the DB cluster scales to next.
", "DBClusterCapacityInfo$CurrentCapacity": "The current capacity of the DB cluster.
", "DBClusterCapacityInfo$SecondsBeforeTimeout": "The number of seconds before a call to ModifyCurrentDBClusterCapacity times out.
Specifies the Provisioned IOPS (I/O operations per second) value.
", "DBInstance$MonitoringInterval": "The interval, in seconds, between points when Enhanced Monitoring metrics are collected for the DB instance.
", "DBInstance$PromotionTier": "A value that specifies the order in which an Aurora Replica is promoted to the primary instance after a failure of the existing primary instance. For more information, see Fault Tolerance for an Aurora DB Cluster in the Amazon Aurora User Guide.
", - "DBInstance$PerformanceInsightsRetentionPeriod": "The amount of time, in days, to retain Performance Insights data. Valid values are 7 or 731 (2 years).
", + "DBInstance$PerformanceInsightsRetentionPeriod": "The number of days to retain Performance Insights data. The default is 7 days. The following values are valid:
7
month * 31, where month is a number of months from 1-23
731
For example, the following values are valid:
93 (3 months * 31)
341 (11 months * 31)
589 (19 months * 31)
731
The upper limit in gibibytes (GiB) to which Amazon RDS can automatically scale the storage of the DB instance.
", "DBInstanceAutomatedBackup$Iops": "The IOPS (I/O operations per second) value for the automated backup.
", "DBInstanceAutomatedBackup$BackupRetentionPeriod": "The retention period for the automated backups.
", @@ -2497,14 +2497,14 @@ "ModifyDBClusterMessage$AllocatedStorage": "The amount of storage in gibibytes (GiB) to allocate to each DB instance in the Multi-AZ DB cluster.
Type: Integer
Valid for: Multi-AZ DB clusters only
", "ModifyDBClusterMessage$Iops": "The amount of Provisioned IOPS (input/output operations per second) to be initially allocated for each DB instance in the Multi-AZ DB cluster.
For information about valid Iops values, see Amazon RDS Provisioned IOPS Storage to Improve Performance in the Amazon RDS User Guide.
Constraints: Must be a multiple between .5 and 50 of the storage amount for the DB cluster.
Valid for: Multi-AZ DB clusters only
", "ModifyDBClusterMessage$MonitoringInterval": "The interval, in seconds, between points when Enhanced Monitoring metrics are collected for the DB cluster. To turn off collecting Enhanced Monitoring metrics, specify 0. The default is 0.
If MonitoringRoleArn is specified, also set MonitoringInterval to a value other than 0.
Valid Values: 0, 1, 5, 10, 15, 30, 60
Valid for: Multi-AZ DB clusters only
", - "ModifyDBClusterMessage$PerformanceInsightsRetentionPeriod": "The amount of time, in days, to retain Performance Insights data. Valid values are 7 or 731 (2 years).
Valid for: Multi-AZ DB clusters only
", + "ModifyDBClusterMessage$PerformanceInsightsRetentionPeriod": "The number of days to retain Performance Insights data. The default is 7 days. The following values are valid:
7
month * 31, where month is a number of months from 1-23
731
For example, the following values are valid:
93 (3 months * 31)
341 (11 months * 31)
589 (19 months * 31)
731
If you specify a retention period such as 94, which isn't a valid value, RDS issues an error.
Valid for: Multi-AZ DB clusters only
", "ModifyDBInstanceMessage$AllocatedStorage": "The new amount of storage in gibibytes (GiB) to allocate for the DB instance.
For MariaDB, MySQL, Oracle, and PostgreSQL, the value supplied must be at least 10% greater than the current value. Values that are not at least 10% greater than the existing value are rounded up so that they are 10% greater than the current value.
For the valid values for allocated storage for each engine, see CreateDBInstance.
The number of days to retain automated backups. Setting this parameter to a positive number enables backups. Setting this parameter to 0 disables automated backups.
Enabling and disabling backups can result in a brief I/O suspension that lasts from a few seconds to a few minutes, depending on the size and class of your DB instance.
These changes are applied during the next maintenance window unless the ApplyImmediately parameter is enabled for this request. If you change the parameter from one non-zero value to another non-zero value, the change is asynchronously applied as soon as possible.
Amazon Aurora
Not applicable. The retention period for automated backups is managed by the DB cluster. For more information, see ModifyDBCluster.
Default: Uses existing setting
Constraints:
It must be a value from 0 to 35. It can't be set to 0 if the DB instance is a source to read replicas. It can't be set to 0 or 35 for an RDS Custom for Oracle DB instance.
It can be specified for a MySQL read replica only if the source is running MySQL 5.6 or later.
It can be specified for a PostgreSQL read replica only if the source is running PostgreSQL 9.3.5.
The number of days to retain automated backups. Setting this parameter to a positive number enables backups. Setting this parameter to 0 disables automated backups.
Enabling and disabling backups can result in a brief I/O suspension that lasts from a few seconds to a few minutes, depending on the size and class of your DB instance.
These changes are applied during the next maintenance window unless the ApplyImmediately parameter is enabled for this request. If you change the parameter from one non-zero value to another non-zero value, the change is asynchronously applied as soon as possible.
Amazon Aurora
Not applicable. The retention period for automated backups is managed by the DB cluster. For more information, see ModifyDBCluster.
Default: Uses existing setting
Constraints:
It must be a value from 0 to 35. It can't be set to 0 if the DB instance is a source to read replicas. It can't be set to 0 for an RDS Custom for Oracle DB instance.
It can be specified for a MySQL read replica only if the source is running MySQL 5.6 or later.
It can be specified for a PostgreSQL read replica only if the source is running PostgreSQL 9.3.5.
The new Provisioned IOPS (I/O operations per second) value for the RDS instance.
Changing this setting doesn't result in an outage and the change is applied during the next maintenance window unless the ApplyImmediately parameter is enabled for this request. If you are migrating from Provisioned IOPS to standard storage, set this value to 0. The DB instance will require a reboot for the change in storage type to take effect.
If you choose to migrate your DB instance from using standard storage to using Provisioned IOPS, or from using Provisioned IOPS to using standard storage, the process can take time. The duration of the migration depends on several factors such as database load, storage size, storage type (standard or Provisioned IOPS), amount of IOPS provisioned (if any), and the number of prior scale storage operations. Typical migration times are under 24 hours, but the process can take up to several days in some cases. During the migration, the DB instance is available for use, but might experience performance degradation. While the migration takes place, nightly backups for the instance are suspended. No other Amazon RDS operations can take place for the instance, including modifying the instance, rebooting the instance, deleting the instance, creating a read replica for the instance, and creating a DB snapshot of the instance.
Constraints: For MariaDB, MySQL, Oracle, and PostgreSQL, the value supplied must be at least 10% greater than the current value. Values that are not at least 10% greater than the existing value are rounded up so that they are 10% greater than the current value.
Default: Uses existing setting
", "ModifyDBInstanceMessage$MonitoringInterval": "The interval, in seconds, between points when Enhanced Monitoring metrics are collected for the DB instance. To disable collecting Enhanced Monitoring metrics, specify 0, which is the default.
If MonitoringRoleArn is specified, set MonitoringInterval to a value other than 0.
This setting doesn't apply to RDS Custom.
Valid Values: 0, 1, 5, 10, 15, 30, 60
The port number on which the database accepts connections.
The value of the DBPortNumber parameter must not match any of the port values specified for options in the option group for the DB instance.
If you change the DBPortNumber value, your database restarts regardless of the value of the ApplyImmediately parameter.
This setting doesn't apply to RDS Custom.
MySQL
Default: 3306
Valid values: 1150-65535
MariaDB
Default: 3306
Valid values: 1150-65535
PostgreSQL
Default: 5432
Valid values: 1150-65535
Type: Integer
Oracle
Default: 1521
Valid values: 1150-65535
SQL Server
Default: 1433
Valid values: 1150-65535 except 1234, 1434, 3260, 3343, 3389, 47001, and 49152-49156.
Amazon Aurora
Default: 3306
Valid values: 1150-65535
A value that specifies the order in which an Aurora Replica is promoted to the primary instance after a failure of the existing primary instance. For more information, see Fault Tolerance for an Aurora DB Cluster in the Amazon Aurora User Guide.
This setting doesn't apply to RDS Custom.
Default: 1
Valid Values: 0 - 15
", - "ModifyDBInstanceMessage$PerformanceInsightsRetentionPeriod": "The amount of time, in days, to retain Performance Insights data. Valid values are 7 or 731 (2 years).
This setting doesn't apply to RDS Custom.
", + "ModifyDBInstanceMessage$PerformanceInsightsRetentionPeriod": "The number of days to retain Performance Insights data. The default is 7 days. The following values are valid:
7
month * 31, where month is a number of months from 1-23
731
For example, the following values are valid:
93 (3 months * 31)
341 (11 months * 31)
589 (19 months * 31)
731
If you specify a retention period such as 94, which isn't a valid value, RDS issues an error.
This setting doesn't apply to RDS Custom.
", "ModifyDBInstanceMessage$MaxAllocatedStorage": "The upper limit in gibibytes (GiB) to which Amazon RDS can automatically scale the storage of the DB instance.
For more information about this setting, including limitations that apply to it, see Managing capacity automatically with Amazon RDS storage autoscaling in the Amazon RDS User Guide.
This setting doesn't apply to RDS Custom.
", "ModifyDBInstanceMessage$ResumeFullAutomationModeMinutes": "The number of minutes to pause the automation. When the time period ends, RDS Custom resumes full automation. The minimum value is 60 (default). The maximum value is 1,440.
The number of seconds that a connection to the proxy can be inactive before the proxy disconnects it. You can set this value higher or lower than the connection timeout limit for the associated database.
", @@ -2535,7 +2535,7 @@ "RestoreDBInstanceFromS3Message$Port": "The port number on which the database accepts connections.
Type: Integer
Valid Values: 1150-65535
Default: 3306
The amount of Provisioned IOPS (input/output operations per second) to allocate initially for the DB instance. For information about valid Iops values, see Amazon RDS Provisioned IOPS Storage to Improve Performance in the Amazon RDS User Guide.
", "RestoreDBInstanceFromS3Message$MonitoringInterval": "The interval, in seconds, between points when Enhanced Monitoring metrics are collected for the DB instance. To disable collecting Enhanced Monitoring metrics, specify 0.
If MonitoringRoleArn is specified, then you must also set MonitoringInterval to a value other than 0.
Valid Values: 0, 1, 5, 10, 15, 30, 60
Default: 0
The amount of time, in days, to retain Performance Insights data. Valid values are 7 or 731 (2 years).
", + "RestoreDBInstanceFromS3Message$PerformanceInsightsRetentionPeriod": "The number of days to retain Performance Insights data. The default is 7 days. The following values are valid:
7
month * 31, where month is a number of months from 1-23
731
For example, the following values are valid:
93 (3 months * 31)
341 (11 months * 31)
589 (19 months * 31)
731
If you specify a retention period such as 94, which isn't a valid value, RDS issues an error.
", "RestoreDBInstanceFromS3Message$MaxAllocatedStorage": "The upper limit in gibibytes (GiB) to which Amazon RDS can automatically scale the storage of the DB instance.
For more information about this setting, including limitations that apply to it, see Managing capacity automatically with Amazon RDS storage autoscaling in the Amazon RDS User Guide.
", "RestoreDBInstanceToPointInTimeMessage$Port": "The port number on which the database accepts connections.
Constraints: Value must be 1150-65535
Default: The same port as the original DB instance.
", "RestoreDBInstanceToPointInTimeMessage$Iops": "The amount of Provisioned IOPS (input/output operations per second) to be initially allocated for the DB instance.
Constraints: Must be an integer greater than 1000.
SQL Server
Setting the IOPS value for the SQL Server database engine isn't supported.
", @@ -2712,8 +2712,8 @@ "PendingCloudwatchLogsExports$LogTypesToEnable": "Log types that are in the process of being deactivated. After they are deactivated, these log types aren't exported to CloudWatch Logs.
", "PendingCloudwatchLogsExports$LogTypesToDisable": "Log types that are in the process of being enabled. After they are enabled, these log types are exported to CloudWatch Logs.
", "RestoreDBClusterFromS3Message$EnableCloudwatchLogsExports": "The list of logs that the restored DB cluster is to export to CloudWatch Logs. The values in the list depend on the DB engine being used.
Aurora MySQL
Possible values are audit, error, general, and slowquery.
Aurora PostgreSQL
Possible value is postgresql.
For more information about exporting CloudWatch Logs for Amazon Aurora, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon Aurora User Guide.
", - "RestoreDBClusterFromSnapshotMessage$EnableCloudwatchLogsExports": "The list of logs that the restored DB cluster is to export to Amazon CloudWatch Logs. The values in the list depend on the DB engine being used.
RDS for MySQL
Possible values are error, general, and slowquery.
RDS for PostgreSQL
Possible values are postgresql and upgrade.
Aurora MySQL
Possible values are audit, error, general, and slowquery.
Aurora PostgreSQL
Possible value is postgresql.
For more information about exporting CloudWatch Logs for Amazon RDS, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon RDS User Guide..
For more information about exporting CloudWatch Logs for Amazon Aurora, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon Aurora User Guide.
Valid for: Aurora DB clusters and Multi-AZ DB clusters
", - "RestoreDBClusterToPointInTimeMessage$EnableCloudwatchLogsExports": "The list of logs that the restored DB cluster is to export to CloudWatch Logs. The values in the list depend on the DB engine being used.
RDS for MySQL
Possible values are error, general, and slowquery.
RDS for PostgreSQL
Possible values are postgresql and upgrade.
Aurora MySQL
Possible values are audit, error, general, and slowquery.
Aurora PostgreSQL
Possible value is postgresql.
For more information about exporting CloudWatch Logs for Amazon RDS, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon RDS User Guide..
For more information about exporting CloudWatch Logs for Amazon Aurora, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon Aurora User Guide.
Valid for: Aurora DB clusters and Multi-AZ DB clusters
", + "RestoreDBClusterFromSnapshotMessage$EnableCloudwatchLogsExports": "The list of logs that the restored DB cluster is to export to Amazon CloudWatch Logs. The values in the list depend on the DB engine being used.
RDS for MySQL
Possible values are error, general, and slowquery.
RDS for PostgreSQL
Possible values are postgresql and upgrade.
Aurora MySQL
Possible values are audit, error, general, and slowquery.
Aurora PostgreSQL
Possible value is postgresql.
For more information about exporting CloudWatch Logs for Amazon RDS, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon RDS User Guide.
For more information about exporting CloudWatch Logs for Amazon Aurora, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon Aurora User Guide.
Valid for: Aurora DB clusters and Multi-AZ DB clusters
", + "RestoreDBClusterToPointInTimeMessage$EnableCloudwatchLogsExports": "The list of logs that the restored DB cluster is to export to CloudWatch Logs. The values in the list depend on the DB engine being used.
RDS for MySQL
Possible values are error, general, and slowquery.
RDS for PostgreSQL
Possible values are postgresql and upgrade.
Aurora MySQL
Possible values are audit, error, general, and slowquery.
Aurora PostgreSQL
Possible value is postgresql.
For more information about exporting CloudWatch Logs for Amazon RDS, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon RDS User Guide.
For more information about exporting CloudWatch Logs for Amazon Aurora, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon Aurora User Guide.
Valid for: Aurora DB clusters and Multi-AZ DB clusters
", "RestoreDBInstanceFromDBSnapshotMessage$EnableCloudwatchLogsExports": "The list of logs that the restored DB instance is to export to CloudWatch Logs. The values in the list depend on the DB engine being used. For more information, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon RDS User Guide.
This setting doesn't apply to RDS Custom.
", "RestoreDBInstanceFromS3Message$EnableCloudwatchLogsExports": "The list of logs that the restored DB instance is to export to CloudWatch Logs. The values in the list depend on the DB engine being used. For more information, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon RDS User Guide.
", "RestoreDBInstanceToPointInTimeMessage$EnableCloudwatchLogsExports": "The list of logs that the restored DB instance is to export to CloudWatch Logs. The values in the list depend on the DB engine being used. For more information, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon RDS User Guide.
This setting doesn't apply to RDS Custom.
" @@ -3164,7 +3164,7 @@ "ProcessorFeatureList": { "base": null, "refs": { - "CreateDBInstanceMessage$ProcessorFeatures": "The number of CPU cores and the number of threads per core for the DB instance class of the DB instance.
This setting doesn't apply to RDS Custom.
", + "CreateDBInstanceMessage$ProcessorFeatures": "The number of CPU cores and the number of threads per core for the DB instance class of the DB instance.
This setting doesn't apply to RDS Custom.
Amazon Aurora
Not applicable.
", "CreateDBInstanceReadReplicaMessage$ProcessorFeatures": "The number of CPU cores and the number of threads per core for the DB instance class of the DB instance.
This setting doesn't apply to RDS Custom.
", "DBInstance$ProcessorFeatures": "The number of CPU cores and the number of threads per core for the DB instance class of the DB instance.
", "DBSnapshot$ProcessorFeatures": "The number of CPU cores and the number of threads per core for the DB instance class of the DB instance when the DB snapshot was created.
", @@ -3721,14 +3721,14 @@ "CopyDBClusterSnapshotMessage$SourceDBClusterSnapshotIdentifier": "The identifier of the DB cluster snapshot to copy. This parameter isn't case-sensitive.
You can't copy an encrypted, shared DB cluster snapshot from one Amazon Web Services Region to another.
Constraints:
Must specify a valid system snapshot in the \"available\" state.
If the source snapshot is in the same Amazon Web Services Region as the copy, specify a valid DB snapshot identifier.
If the source snapshot is in a different Amazon Web Services Region than the copy, specify a valid DB cluster snapshot ARN. For more information, go to Copying Snapshots Across Amazon Web Services Regions in the Amazon Aurora User Guide.
Example: my-cluster-snapshot1
The identifier of the new DB cluster snapshot to create from the source DB cluster snapshot. This parameter isn't case-sensitive.
Constraints:
Must contain from 1 to 63 letters, numbers, or hyphens.
First character must be a letter.
Can't end with a hyphen or contain two consecutive hyphens.
Example: my-cluster-snapshot2
The Amazon Web Services KMS key identifier for an encrypted DB cluster snapshot. The Amazon Web Services KMS key identifier is the key ARN, key ID, alias ARN, or alias name for the Amazon Web Services KMS key.
If you copy an encrypted DB cluster snapshot from your Amazon Web Services account, you can specify a value for KmsKeyId to encrypt the copy with a new KMS key. If you don't specify a value for KmsKeyId, then the copy of the DB cluster snapshot is encrypted with the same KMS key as the source DB cluster snapshot.
If you copy an encrypted DB cluster snapshot that is shared from another Amazon Web Services account, then you must specify a value for KmsKeyId.
To copy an encrypted DB cluster snapshot to another Amazon Web Services Region, you must set KmsKeyId to the Amazon Web Services KMS key identifier you want to use to encrypt the copy of the DB cluster snapshot in the destination Amazon Web Services Region. KMS keys are specific to the Amazon Web Services Region that they are created in, and you can't use KMS keys from one Amazon Web Services Region in another Amazon Web Services Region.
If you copy an unencrypted DB cluster snapshot and specify a value for the KmsKeyId parameter, an error is returned.
The URL that contains a Signature Version 4 signed request for the CopyDBClusterSnapshot API action in the Amazon Web Services Region that contains the source DB cluster snapshot to copy. The PreSignedUrl parameter must be used when copying an encrypted DB cluster snapshot from another Amazon Web Services Region. Don't specify PreSignedUrl when you are copying an encrypted DB cluster snapshot in the same Amazon Web Services Region.
The pre-signed URL must be a valid request for the CopyDBClusterSnapshot API action that can be executed in the source Amazon Web Services Region that contains the encrypted DB cluster snapshot to be copied. The pre-signed URL request must contain the following parameter values:
KmsKeyId - The Amazon Web Services KMS key identifier for the KMS key to use to encrypt the copy of the DB cluster snapshot in the destination Amazon Web Services Region. This is the same identifier for both the CopyDBClusterSnapshot action that is called in the destination Amazon Web Services Region, and the action contained in the pre-signed URL.
DestinationRegion - The name of the Amazon Web Services Region that the DB cluster snapshot is to be created in.
SourceDBClusterSnapshotIdentifier - The DB cluster snapshot identifier for the encrypted DB cluster snapshot to be copied. This identifier must be in the Amazon Resource Name (ARN) format for the source Amazon Web Services Region. For example, if you are copying an encrypted DB cluster snapshot from the us-west-2 Amazon Web Services Region, then your SourceDBClusterSnapshotIdentifier looks like the following example: arn:aws:rds:us-west-2:123456789012:cluster-snapshot:aurora-cluster1-snapshot-20161115.
To learn how to generate a Signature Version 4 signed request, see Authenticating Requests: Using Query Parameters (Amazon Web Services Signature Version 4) and Signature Version 4 Signing Process.
If you are using an Amazon Web Services SDK tool or the CLI, you can specify SourceRegion (or --source-region for the CLI) instead of specifying PreSignedUrl manually. Specifying SourceRegion autogenerates a pre-signed URL that is a valid request for the operation that can be executed in the source Amazon Web Services Region.
When you are copying a DB cluster snapshot from one Amazon Web Services GovCloud (US) Region to another, the URL that contains a Signature Version 4 signed request for the CopyDBClusterSnapshot API operation in the Amazon Web Services Region that contains the source DB cluster snapshot to copy. Use the PreSignedUrl parameter when copying an encrypted DB cluster snapshot from another Amazon Web Services Region. Don't specify PreSignedUrl when copying an encrypted DB cluster snapshot in the same Amazon Web Services Region.
This setting applies only to Amazon Web Services GovCloud (US) Regions. It's ignored in other Amazon Web Services Regions.
The presigned URL must be a valid request for the CopyDBClusterSnapshot API operation that can run in the source Amazon Web Services Region that contains the encrypted DB cluster snapshot to copy. The presigned URL request must contain the following parameter values:
KmsKeyId - The KMS key identifier for the KMS key to use to encrypt the copy of the DB cluster snapshot in the destination Amazon Web Services Region. This is the same identifier for both the CopyDBClusterSnapshot operation that is called in the destination Amazon Web Services Region, and the operation contained in the presigned URL.
DestinationRegion - The name of the Amazon Web Services Region that the DB cluster snapshot is to be created in.
SourceDBClusterSnapshotIdentifier - The DB cluster snapshot identifier for the encrypted DB cluster snapshot to be copied. This identifier must be in the Amazon Resource Name (ARN) format for the source Amazon Web Services Region. For example, if you are copying an encrypted DB cluster snapshot from the us-west-2 Amazon Web Services Region, then your SourceDBClusterSnapshotIdentifier looks like the following example: arn:aws:rds:us-west-2:123456789012:cluster-snapshot:aurora-cluster1-snapshot-20161115.
To learn how to generate a Signature Version 4 signed request, see Authenticating Requests: Using Query Parameters (Amazon Web Services Signature Version 4) and Signature Version 4 Signing Process.
If you are using an Amazon Web Services SDK tool or the CLI, you can specify SourceRegion (or --source-region for the CLI) instead of specifying PreSignedUrl manually. Specifying SourceRegion autogenerates a presigned URL that is a valid request for the operation that can run in the source Amazon Web Services Region.
The identifier or ARN for the source DB parameter group. For information about creating an ARN, see Constructing an ARN for Amazon RDS in the Amazon RDS User Guide.
Constraints:
Must specify a valid DB parameter group.
The identifier for the copied DB parameter group.
Constraints:
Can't be null, empty, or blank
Must contain from 1 to 255 letters, numbers, or hyphens
First character must be a letter
Can't end with a hyphen or contain two consecutive hyphens
Example: my-db-parameter-group
A description for the copied DB parameter group.
", - "CopyDBSnapshotMessage$SourceDBSnapshotIdentifier": "The identifier for the source DB snapshot.
If the source snapshot is in the same Amazon Web Services Region as the copy, specify a valid DB snapshot identifier. For example, you might specify rds:mysql-instance1-snapshot-20130805.
If the source snapshot is in a different Amazon Web Services Region than the copy, specify a valid DB snapshot ARN. For example, you might specify arn:aws:rds:us-west-2:123456789012:snapshot:mysql-instance1-snapshot-20130805.
If you are copying from a shared manual DB snapshot, this parameter must be the Amazon Resource Name (ARN) of the shared DB snapshot.
If you are copying an encrypted snapshot this parameter must be in the ARN format for the source Amazon Web Services Region, and must match the SourceDBSnapshotIdentifier in the PreSignedUrl parameter.
Constraints:
Must specify a valid system snapshot in the \"available\" state.
Example: rds:mydb-2012-04-02-00-01
Example: arn:aws:rds:us-west-2:123456789012:snapshot:mysql-instance1-snapshot-20130805
The identifier for the source DB snapshot.
If the source snapshot is in the same Amazon Web Services Region as the copy, specify a valid DB snapshot identifier. For example, you might specify rds:mysql-instance1-snapshot-20130805.
If the source snapshot is in a different Amazon Web Services Region than the copy, specify a valid DB snapshot ARN. For example, you might specify arn:aws:rds:us-west-2:123456789012:snapshot:mysql-instance1-snapshot-20130805.
If you are copying from a shared manual DB snapshot, this parameter must be the Amazon Resource Name (ARN) of the shared DB snapshot.
If you are copying an encrypted snapshot this parameter must be in the ARN format for the source Amazon Web Services Region.
Constraints:
Must specify a valid system snapshot in the \"available\" state.
Example: rds:mydb-2012-04-02-00-01
Example: arn:aws:rds:us-west-2:123456789012:snapshot:mysql-instance1-snapshot-20130805
The identifier for the copy of the snapshot.
Constraints:
Can't be null, empty, or blank
Must contain from 1 to 255 letters, numbers, or hyphens
First character must be a letter
Can't end with a hyphen or contain two consecutive hyphens
Example: my-db-snapshot
The Amazon Web Services KMS key identifier for an encrypted DB snapshot. The Amazon Web Services KMS key identifier is the key ARN, key ID, alias ARN, or alias name for the KMS key.
If you copy an encrypted DB snapshot from your Amazon Web Services account, you can specify a value for this parameter to encrypt the copy with a new KMS key. If you don't specify a value for this parameter, then the copy of the DB snapshot is encrypted with the same Amazon Web Services KMS key as the source DB snapshot.
If you copy an encrypted DB snapshot that is shared from another Amazon Web Services account, then you must specify a value for this parameter.
If you specify this parameter when you copy an unencrypted snapshot, the copy is encrypted.
If you copy an encrypted snapshot to a different Amazon Web Services Region, then you must specify an Amazon Web Services KMS key identifier for the destination Amazon Web Services Region. KMS keys are specific to the Amazon Web Services Region that they are created in, and you can't use KMS keys from one Amazon Web Services Region in another Amazon Web Services Region.
", - "CopyDBSnapshotMessage$PreSignedUrl": "The URL that contains a Signature Version 4 signed request for the CopyDBSnapshot API action in the source Amazon Web Services Region that contains the source DB snapshot to copy.
You must specify this parameter when you copy an encrypted DB snapshot from another Amazon Web Services Region by using the Amazon RDS API. Don't specify PreSignedUrl when you are copying an encrypted DB snapshot in the same Amazon Web Services Region.
The presigned URL must be a valid request for the CopyDBSnapshot API action that can be executed in the source Amazon Web Services Region that contains the encrypted DB snapshot to be copied. The presigned URL request must contain the following parameter values:
DestinationRegion - The Amazon Web Services Region that the encrypted DB snapshot is copied to. This Amazon Web Services Region is the same one where the CopyDBSnapshot action is called that contains this presigned URL.
For example, if you copy an encrypted DB snapshot from the us-west-2 Amazon Web Services Region to the us-east-1 Amazon Web Services Region, then you call the CopyDBSnapshot action in the us-east-1 Amazon Web Services Region and provide a presigned URL that contains a call to the CopyDBSnapshot action in the us-west-2 Amazon Web Services Region. For this example, the DestinationRegion in the presigned URL must be set to the us-east-1 Amazon Web Services Region.
KmsKeyId - The Amazon Web Services KMS key identifier for the KMS key to use to encrypt the copy of the DB snapshot in the destination Amazon Web Services Region. This is the same identifier for both the CopyDBSnapshot action that is called in the destination Amazon Web Services Region, and the action contained in the presigned URL.
SourceDBSnapshotIdentifier - The DB snapshot identifier for the encrypted snapshot to be copied. This identifier must be in the Amazon Resource Name (ARN) format for the source Amazon Web Services Region. For example, if you are copying an encrypted DB snapshot from the us-west-2 Amazon Web Services Region, then your SourceDBSnapshotIdentifier looks like the following example: arn:aws:rds:us-west-2:123456789012:snapshot:mysql-instance1-snapshot-20161115.
To learn how to generate a Signature Version 4 signed request, see Authenticating Requests: Using Query Parameters (Amazon Web Services Signature Version 4) and Signature Version 4 Signing Process.
If you are using an Amazon Web Services SDK tool or the CLI, you can specify SourceRegion (or --source-region for the CLI) instead of specifying PreSignedUrl manually. Specifying SourceRegion autogenerates a pre-signed URL that is a valid request for the operation that can be executed in the source Amazon Web Services Region.
When you are copying a snapshot from one Amazon Web Services GovCloud (US) Region to another, the URL that contains a Signature Version 4 signed request for the CopyDBSnapshot API operation in the source Amazon Web Services Region that contains the source DB snapshot to copy.
This setting applies only to Amazon Web Services GovCloud (US) Regions. It's ignored in other Amazon Web Services Regions.
You must specify this parameter when you copy an encrypted DB snapshot from another Amazon Web Services Region by using the Amazon RDS API. Don't specify PreSignedUrl when you are copying an encrypted DB snapshot in the same Amazon Web Services Region.
The presigned URL must be a valid request for the CopyDBClusterSnapshot API operation that can run in the source Amazon Web Services Region that contains the encrypted DB cluster snapshot to copy. The presigned URL request must contain the following parameter values:
DestinationRegion - The Amazon Web Services Region that the encrypted DB snapshot is copied to. This Amazon Web Services Region is the same one where the CopyDBSnapshot operation is called that contains this presigned URL.
For example, if you copy an encrypted DB snapshot from the us-west-2 Amazon Web Services Region to the us-east-1 Amazon Web Services Region, then you call the CopyDBSnapshot operation in the us-east-1 Amazon Web Services Region and provide a presigned URL that contains a call to the CopyDBSnapshot operation in the us-west-2 Amazon Web Services Region. For this example, the DestinationRegion in the presigned URL must be set to the us-east-1 Amazon Web Services Region.
KmsKeyId - The KMS key identifier for the KMS key to use to encrypt the copy of the DB snapshot in the destination Amazon Web Services Region. This is the same identifier for both the CopyDBSnapshot operation that is called in the destination Amazon Web Services Region, and the operation contained in the presigned URL.
SourceDBSnapshotIdentifier - The DB snapshot identifier for the encrypted snapshot to be copied. This identifier must be in the Amazon Resource Name (ARN) format for the source Amazon Web Services Region. For example, if you are copying an encrypted DB snapshot from the us-west-2 Amazon Web Services Region, then your SourceDBSnapshotIdentifier looks like the following example: arn:aws:rds:us-west-2:123456789012:snapshot:mysql-instance1-snapshot-20161115.
To learn how to generate a Signature Version 4 signed request, see Authenticating Requests: Using Query Parameters (Amazon Web Services Signature Version 4) and Signature Version 4 Signing Process.
If you are using an Amazon Web Services SDK tool or the CLI, you can specify SourceRegion (or --source-region for the CLI) instead of specifying PreSignedUrl manually. Specifying SourceRegion autogenerates a presigned URL that is a valid request for the operation that can run in the source Amazon Web Services Region.
The name of an option group to associate with the copy of the snapshot.
Specify this option if you are copying a snapshot from one Amazon Web Services Region to another, and your DB instance uses a nondefault option group. If your source DB instance uses Transparent Data Encryption for Oracle or Microsoft SQL Server, you must specify this option when copying across Amazon Web Services Regions. For more information, see Option group considerations in the Amazon RDS User Guide.
", "CopyDBSnapshotMessage$TargetCustomAvailabilityZone": "The external custom Availability Zone (CAZ) identifier for the target CAZ.
Example: rds-caz-aiqhTgQv.
The identifier for the source option group.
Constraints:
Must specify a valid option group.
The weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).
Format: ddd:hh24:mi-ddd:hh24:mi
The default is a 30-minute window selected at random from an 8-hour block of time for each Amazon Web Services Region, occurring on a random day of the week. To see the time blocks available, see Adjusting the Preferred DB Cluster Maintenance Window in the Amazon Aurora User Guide.
Valid Days: Mon, Tue, Wed, Thu, Fri, Sat, Sun.
Constraints: Minimum 30-minute window.
Valid for: Aurora DB clusters and Multi-AZ DB clusters
", "CreateDBClusterMessage$ReplicationSourceIdentifier": "The Amazon Resource Name (ARN) of the source DB instance or DB cluster if this DB cluster is created as a read replica.
Valid for: Aurora DB clusters only
", "CreateDBClusterMessage$KmsKeyId": "The Amazon Web Services KMS key identifier for an encrypted DB cluster.
The Amazon Web Services KMS key identifier is the key ARN, key ID, alias ARN, or alias name for the KMS key. To use a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN.
When a KMS key isn't specified in KmsKeyId:
If ReplicationSourceIdentifier identifies an encrypted source, then Amazon RDS will use the KMS key used to encrypt the source. Otherwise, Amazon RDS will use your default KMS key.
If the StorageEncrypted parameter is enabled and ReplicationSourceIdentifier isn't specified, then Amazon RDS will use your default KMS key.
There is a default KMS key for your Amazon Web Services account. Your Amazon Web Services account has a different default KMS key for each Amazon Web Services Region.
If you create a read replica of an encrypted DB cluster in another Amazon Web Services Region, you must set KmsKeyId to a KMS key identifier that is valid in the destination Amazon Web Services Region. This KMS key is used to encrypt the read replica in that Amazon Web Services Region.
Valid for: Aurora DB clusters and Multi-AZ DB clusters
", - "CreateDBClusterMessage$PreSignedUrl": "A URL that contains a Signature Version 4 signed request for the CreateDBCluster action to be called in the source Amazon Web Services Region where the DB cluster is replicated from. Specify PreSignedUrl only when you are performing cross-Region replication from an encrypted DB cluster.
The pre-signed URL must be a valid request for the CreateDBCluster API action that can be executed in the source Amazon Web Services Region that contains the encrypted DB cluster to be copied.
The pre-signed URL request must contain the following parameter values:
KmsKeyId - The Amazon Web Services KMS key identifier for the KMS key to use to encrypt the copy of the DB cluster in the destination Amazon Web Services Region. This should refer to the same KMS key for both the CreateDBCluster action that is called in the destination Amazon Web Services Region, and the action contained in the pre-signed URL.
DestinationRegion - The name of the Amazon Web Services Region that Aurora read replica will be created in.
ReplicationSourceIdentifier - The DB cluster identifier for the encrypted DB cluster to be copied. This identifier must be in the Amazon Resource Name (ARN) format for the source Amazon Web Services Region. For example, if you are copying an encrypted DB cluster from the us-west-2 Amazon Web Services Region, then your ReplicationSourceIdentifier would look like Example: arn:aws:rds:us-west-2:123456789012:cluster:aurora-cluster1.
To learn how to generate a Signature Version 4 signed request, see Authenticating Requests: Using Query Parameters (Amazon Web Services Signature Version 4) and Signature Version 4 Signing Process.
If you are using an Amazon Web Services SDK tool or the CLI, you can specify SourceRegion (or --source-region for the CLI) instead of specifying PreSignedUrl manually. Specifying SourceRegion autogenerates a pre-signed URL that is a valid request for the operation that can be executed in the source Amazon Web Services Region.
Valid for: Aurora DB clusters only
", - "CreateDBClusterMessage$EngineMode": "The DB engine mode of the DB cluster, either provisioned, serverless, parallelquery, global, or multimaster.
The parallelquery engine mode isn't required for Aurora MySQL version 1.23 and higher 1.x versions, and version 2.09 and higher 2.x versions.
The global engine mode isn't required for Aurora MySQL version 1.22 and higher 1.x versions, and global engine mode isn't required for any 2.x versions.
The multimaster engine mode only applies for DB clusters created with Aurora MySQL version 5.6.10a.
For Aurora PostgreSQL, the global engine mode isn't required, and both the parallelquery and the multimaster engine modes currently aren't supported.
Limitations and requirements apply to some DB engine modes. For more information, see the following sections in the Amazon Aurora User Guide:
Valid for: Aurora DB clusters only
", + "CreateDBClusterMessage$PreSignedUrl": "When you are replicating a DB cluster from one Amazon Web Services GovCloud (US) Region to another, an URL that contains a Signature Version 4 signed request for the CreateDBCluster operation to be called in the source Amazon Web Services Region where the DB cluster is replicated from. Specify PreSignedUrl only when you are performing cross-Region replication from an encrypted DB cluster.
The presigned URL must be a valid request for the CreateDBCluster API operation that can run in the source Amazon Web Services Region that contains the encrypted DB cluster to copy.
The presigned URL request must contain the following parameter values:
KmsKeyId - The KMS key identifier for the KMS key to use to encrypt the copy of the DB cluster in the destination Amazon Web Services Region. This should refer to the same KMS key for both the CreateDBCluster operation that is called in the destination Amazon Web Services Region, and the operation contained in the presigned URL.
DestinationRegion - The name of the Amazon Web Services Region that Aurora read replica will be created in.
ReplicationSourceIdentifier - The DB cluster identifier for the encrypted DB cluster to be copied. This identifier must be in the Amazon Resource Name (ARN) format for the source Amazon Web Services Region. For example, if you are copying an encrypted DB cluster from the us-west-2 Amazon Web Services Region, then your ReplicationSourceIdentifier would look like Example: arn:aws:rds:us-west-2:123456789012:cluster:aurora-cluster1.
To learn how to generate a Signature Version 4 signed request, see Authenticating Requests: Using Query Parameters (Amazon Web Services Signature Version 4) and Signature Version 4 Signing Process.
If you are using an Amazon Web Services SDK tool or the CLI, you can specify SourceRegion (or --source-region for the CLI) instead of specifying PreSignedUrl manually. Specifying SourceRegion autogenerates a presigned URL that is a valid request for the operation that can run in the source Amazon Web Services Region.
Valid for: Aurora DB clusters only
", + "CreateDBClusterMessage$EngineMode": "The DB engine mode of the DB cluster, either provisioned, serverless, parallelquery, global, or multimaster.
The parallelquery engine mode isn't required for Aurora MySQL version 1.23 and higher 1.x versions, and version 2.09 and higher 2.x versions.
The global engine mode isn't required for Aurora MySQL version 1.22 and higher 1.x versions, and global engine mode isn't required for any 2.x versions.
The multimaster engine mode only applies for DB clusters created with Aurora MySQL version 5.6.10a.
The serverless engine mode only applies for Aurora Serverless v1 DB clusters.
For Aurora PostgreSQL, the global engine mode isn't required, and both the parallelquery and the multimaster engine modes currently aren't supported.
Limitations and requirements apply to some DB engine modes. For more information, see the following sections in the Amazon Aurora User Guide:
Valid for: Aurora DB clusters only
", "CreateDBClusterMessage$GlobalClusterIdentifier": "The global cluster ID of an Aurora cluster that becomes the primary cluster in the new global database cluster.
Valid for: Aurora DB clusters only
", "CreateDBClusterMessage$Domain": "The Active Directory directory ID to create the DB cluster in.
For Amazon Aurora DB clusters, Amazon RDS can use Kerberos authentication to authenticate users that connect to the DB cluster.
For more information, see Kerberos authentication in the Amazon Aurora User Guide.
Valid for: Aurora DB clusters only
", "CreateDBClusterMessage$DomainIAMRoleName": "Specify the name of the IAM role to be used when making API calls to the Directory Service.
Valid for: Aurora DB clusters only
", @@ -3767,7 +3767,7 @@ "CreateDBClusterSnapshotMessage$DBClusterIdentifier": "The identifier of the DB cluster to create a snapshot for. This parameter isn't case-sensitive.
Constraints:
Must match the identifier of an existing DBCluster.
Example: my-cluster1
The meaning of this parameter differs according to the database engine you use.
MySQL
The name of the database to create when the DB instance is created. If this parameter isn't specified, no database is created in the DB instance.
Constraints:
Must contain 1 to 64 letters or numbers.
Must begin with a letter. Subsequent characters can be letters, underscores, or digits (0-9).
Can't be a word reserved by the specified database engine
MariaDB
The name of the database to create when the DB instance is created. If this parameter isn't specified, no database is created in the DB instance.
Constraints:
Must contain 1 to 64 letters or numbers.
Must begin with a letter. Subsequent characters can be letters, underscores, or digits (0-9).
Can't be a word reserved by the specified database engine
PostgreSQL
The name of the database to create when the DB instance is created. If this parameter isn't specified, a database named postgres is created in the DB instance.
Constraints:
Must contain 1 to 63 letters, numbers, or underscores.
Must begin with a letter. Subsequent characters can be letters, underscores, or digits (0-9).
Can't be a word reserved by the specified database engine
Oracle
The Oracle System ID (SID) of the created DB instance. If you specify null, the default value ORCL is used. You can't specify the string NULL, or any other reserved word, for DBName.
Default: ORCL
Constraints:
Can't be longer than 8 characters
Amazon RDS Custom for Oracle
The Oracle System ID (SID) of the created RDS Custom DB instance. If you don't specify a value, the default value is ORCL.
Default: ORCL
Constraints:
It must contain 1 to 8 alphanumeric characters.
It must contain a letter.
It can't be a word reserved by the database engine.
Amazon RDS Custom for SQL Server
Not applicable. Must be null.
SQL Server
Not applicable. Must be null.
Amazon Aurora MySQL
The name of the database to create when the primary DB instance of the Aurora MySQL DB cluster is created. If this parameter isn't specified for an Aurora MySQL DB cluster, no database is created in the DB cluster.
Constraints:
It must contain 1 to 64 alphanumeric characters.
It can't be a word reserved by the database engine.
Amazon Aurora PostgreSQL
The name of the database to create when the primary DB instance of the Aurora PostgreSQL DB cluster is created. If this parameter isn't specified for an Aurora PostgreSQL DB cluster, a database named postgres is created in the DB cluster.
Constraints:
It must contain 1 to 63 alphanumeric characters.
It must begin with a letter or an underscore. Subsequent characters can be letters, underscores, or digits (0 to 9).
It can't be a word reserved by the database engine.
The DB instance identifier. This parameter is stored as a lowercase string.
Constraints:
Must contain from 1 to 63 letters, numbers, or hyphens.
First character must be a letter.
Can't end with a hyphen or contain two consecutive hyphens.
Example: mydbinstance
The compute and memory capacity of the DB instance, for example db.m4.large. Not all DB instance classes are available in all Amazon Web Services Regions, or for all database engines. For the full list of DB instance classes, and availability for your engine, see DB Instance Class in the Amazon RDS User Guide.
", + "CreateDBInstanceMessage$DBInstanceClass": "The compute and memory capacity of the DB instance, for example db.m5.large. Not all DB instance classes are available in all Amazon Web Services Regions, or for all database engines. For the full list of DB instance classes, and availability for your engine, see DB instance classes in the Amazon RDS User Guide or Aurora DB instance classes in the Amazon Aurora User Guide.
", "CreateDBInstanceMessage$Engine": "The name of the database engine to be used for this instance.
Not every database engine is available for every Amazon Web Services Region.
Valid Values:
aurora (for MySQL 5.6-compatible Aurora)
aurora-mysql (for MySQL 5.7-compatible and MySQL 8.0-compatible Aurora)
aurora-postgresql
custom-oracle-ee (for RDS Custom for Oracle instances)
custom-sqlserver-ee (for RDS Custom for SQL Server instances)
custom-sqlserver-se (for RDS Custom for SQL Server instances)
custom-sqlserver-web (for RDS Custom for SQL Server instances)
mariadb
mysql
oracle-ee
oracle-ee-cdb
oracle-se2
oracle-se2-cdb
postgres
sqlserver-ee
sqlserver-se
sqlserver-ex
sqlserver-web
The name for the master user.
Amazon Aurora
Not applicable. The name for the master user is managed by the DB cluster.
Amazon RDS
Constraints:
Required.
Must be 1 to 16 letters, numbers, or underscores.
First character must be a letter.
Can't be a reserved word for the chosen database engine.
The password for the master user. The password can include any printable ASCII character except \"/\", \"\"\", or \"@\".
Amazon Aurora
Not applicable. The password for the master user is managed by the DB cluster.
MariaDB
Constraints: Must contain from 8 to 41 characters.
Microsoft SQL Server
Constraints: Must contain from 8 to 128 characters.
MySQL
Constraints: Must contain from 8 to 41 characters.
Oracle
Constraints: Must contain from 8 to 30 characters.
PostgreSQL
Constraints: Must contain from 8 to 128 characters.
", @@ -3776,19 +3776,19 @@ "CreateDBInstanceMessage$PreferredMaintenanceWindow": "The time range each week during which system maintenance can occur, in Universal Coordinated Time (UTC). For more information, see Amazon RDS Maintenance Window.
Format: ddd:hh24:mi-ddd:hh24:mi
The default is a 30-minute window selected at random from an 8-hour block of time for each Amazon Web Services Region, occurring on a random day of the week.
Valid Days: Mon, Tue, Wed, Thu, Fri, Sat, Sun.
Constraints: Minimum 30-minute window.
", "CreateDBInstanceMessage$DBParameterGroupName": "The name of the DB parameter group to associate with this DB instance. If you do not specify a value, then the default DB parameter group for the specified DB engine and version is used.
This setting doesn't apply to RDS Custom.
Constraints:
Must be 1 to 255 letters, numbers, or hyphens.
First character must be a letter
Can't end with a hyphen or contain two consecutive hyphens
The daily time range during which automated backups are created if automated backups are enabled, using the BackupRetentionPeriod parameter. The default is a 30-minute window selected at random from an 8-hour block of time for each Amazon Web Services Region. For more information, see Backup window in the Amazon RDS User Guide.
Amazon Aurora
Not applicable. The daily time range for creating automated backups is managed by the DB cluster.
Constraints:
Must be in the format hh24:mi-hh24:mi.
Must be in Universal Coordinated Time (UTC).
Must not conflict with the preferred maintenance window.
Must be at least 30 minutes.
The version number of the database engine to use.
For a list of valid engine versions, use the DescribeDBEngineVersions action.
The following are the database engines and links to information about the major and minor versions that are available with Amazon RDS. Not every database engine is available for every Amazon Web Services Region.
Amazon Aurora
Not applicable. The version number of the database engine to be used by the DB instance is managed by the DB cluster.
Amazon RDS Custom for Oracle
A custom engine version (CEV) that you have previously created. This setting is required for RDS Custom for Oracle. The CEV name has the following format: 19.customized_string . An example identifier is 19.my_cev1. For more information, see Creating an RDS Custom for Oracle DB instance in the Amazon RDS User Guide.
Amazon RDS Custom for SQL Server
See RDS Custom for SQL Server general requirements in the Amazon RDS User Guide.
MariaDB
For information, see MariaDB on Amazon RDS Versions in the Amazon RDS User Guide.
Microsoft SQL Server
For information, see Microsoft SQL Server Versions on Amazon RDS in the Amazon RDS User Guide.
MySQL
For information, see MySQL on Amazon RDS Versions in the Amazon RDS User Guide.
Oracle
For information, see Oracle Database Engine Release Notes in the Amazon RDS User Guide.
PostgreSQL
For information, see Amazon RDS for PostgreSQL versions and extensions in the Amazon RDS User Guide.
", - "CreateDBInstanceMessage$LicenseModel": "License model information for this DB instance.
Valid values: license-included | bring-your-own-license | general-public-license
This setting doesn't apply to RDS Custom.
", - "CreateDBInstanceMessage$OptionGroupName": "A value that indicates that the DB instance should be associated with the specified option group.
Permanent options, such as the TDE option for Oracle Advanced Security TDE, can't be removed from an option group. Also, that option group can't be removed from a DB instance after it is associated with a DB instance.
This setting doesn't apply to RDS Custom.
", + "CreateDBInstanceMessage$EngineVersion": "The version number of the database engine to use.
For a list of valid engine versions, use the DescribeDBEngineVersions operation.
The following are the database engines and links to information about the major and minor versions that are available with Amazon RDS. Not every database engine is available for every Amazon Web Services Region.
Amazon Aurora
Not applicable. The version number of the database engine to be used by the DB instance is managed by the DB cluster.
Amazon RDS Custom for Oracle
A custom engine version (CEV) that you have previously created. This setting is required for RDS Custom for Oracle. The CEV name has the following format: 19.customized_string . An example identifier is 19.my_cev1. For more information, see Creating an RDS Custom for Oracle DB instance in the Amazon RDS User Guide.
Amazon RDS Custom for SQL Server
See RDS Custom for SQL Server general requirements in the Amazon RDS User Guide.
MariaDB
For information, see MariaDB on Amazon RDS Versions in the Amazon RDS User Guide.
Microsoft SQL Server
For information, see Microsoft SQL Server Versions on Amazon RDS in the Amazon RDS User Guide.
MySQL
For information, see MySQL on Amazon RDS Versions in the Amazon RDS User Guide.
Oracle
For information, see Oracle Database Engine Release Notes in the Amazon RDS User Guide.
PostgreSQL
For information, see Amazon RDS for PostgreSQL versions and extensions in the Amazon RDS User Guide.
", + "CreateDBInstanceMessage$LicenseModel": "License model information for this DB instance.
Valid values: license-included | bring-your-own-license | general-public-license
This setting doesn't apply to RDS Custom.
Amazon Aurora
Not applicable.
", + "CreateDBInstanceMessage$OptionGroupName": "A value that indicates that the DB instance should be associated with the specified option group.
Permanent options, such as the TDE option for Oracle Advanced Security TDE, can't be removed from an option group. Also, that option group can't be removed from a DB instance after it is associated with a DB instance.
This setting doesn't apply to RDS Custom.
Amazon Aurora
Not applicable.
", "CreateDBInstanceMessage$CharacterSetName": "For supported engines, this value indicates that the DB instance should be associated with the specified CharacterSet.
This setting doesn't apply to RDS Custom. However, if you need to change the character set, you can change it on the database itself.
Amazon Aurora
Not applicable. The character set is managed by the DB cluster. For more information, see CreateDBCluster.
The name of the NCHAR character set for the Oracle DB instance.
This parameter doesn't apply to RDS Custom.
", "CreateDBInstanceMessage$DBClusterIdentifier": "The identifier of the DB cluster that the instance will belong to.
This setting doesn't apply to RDS Custom.
", - "CreateDBInstanceMessage$StorageType": "Specifies the storage type to be associated with the DB instance.
Valid values: standard | gp2 | io1
If you specify io1, you must also include a value for the Iops parameter.
Default: io1 if the Iops parameter is specified, otherwise gp2
The ARN from the key store with which to associate the instance for TDE encryption.
This setting doesn't apply to RDS Custom.
", + "CreateDBInstanceMessage$StorageType": "Specifies the storage type to be associated with the DB instance.
Valid values: standard | gp2 | io1
If you specify io1, you must also include a value for the Iops parameter.
Default: io1 if the Iops parameter is specified, otherwise gp2
Amazon Aurora
Not applicable. Storage is managed by the DB cluster.
", + "CreateDBInstanceMessage$TdeCredentialArn": "The ARN from the key store with which to associate the instance for TDE encryption.
This setting doesn't apply to RDS Custom.
Amazon Aurora
Not applicable.
", "CreateDBInstanceMessage$TdeCredentialPassword": "The password for the given ARN from the key store in order to access the device.
This setting doesn't apply to RDS Custom.
", "CreateDBInstanceMessage$KmsKeyId": "The Amazon Web Services KMS key identifier for an encrypted DB instance.
The Amazon Web Services KMS key identifier is the key ARN, key ID, alias ARN, or alias name for the KMS key. To use a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN.
Amazon Aurora
Not applicable. The Amazon Web Services KMS key identifier is managed by the DB cluster. For more information, see CreateDBCluster.
If StorageEncrypted is enabled, and you do not specify a value for the KmsKeyId parameter, then Amazon RDS uses your default KMS key. There is a default KMS key for your Amazon Web Services account. Your Amazon Web Services account has a different default KMS key for each Amazon Web Services Region.
Amazon RDS Custom
A KMS key is required for RDS Custom instances. For most RDS engines, if you leave this parameter empty while enabling StorageEncrypted, the engine uses the default KMS key. However, RDS Custom doesn't use the default key when this parameter is empty. You must explicitly specify a key.
The Active Directory directory ID to create the DB instance in. Currently, only MySQL, Microsoft SQL Server, Oracle, and PostgreSQL DB instances can be created in an Active Directory Domain.
For more information, see Kerberos Authentication in the Amazon RDS User Guide.
This setting doesn't apply to RDS Custom.
", + "CreateDBInstanceMessage$Domain": "The Active Directory directory ID to create the DB instance in. Currently, only MySQL, Microsoft SQL Server, Oracle, and PostgreSQL DB instances can be created in an Active Directory Domain.
For more information, see Kerberos Authentication in the Amazon RDS User Guide.
This setting doesn't apply to RDS Custom.
Amazon Aurora
Not applicable. The domain is managed by the DB cluster.
", "CreateDBInstanceMessage$MonitoringRoleArn": "The ARN for the IAM role that permits RDS to send enhanced monitoring metrics to Amazon CloudWatch Logs. For example, arn:aws:iam:123456789012:role/emaccess. For information on creating a monitoring role, see Setting Up and Enabling Enhanced Monitoring in the Amazon RDS User Guide.
If MonitoringInterval is set to a value other than 0, then you must supply a MonitoringRoleArn value.
This setting doesn't apply to RDS Custom.
", - "CreateDBInstanceMessage$DomainIAMRoleName": "Specify the name of the IAM role to be used when making API calls to the Directory Service.
This setting doesn't apply to RDS Custom.
", + "CreateDBInstanceMessage$DomainIAMRoleName": "Specify the name of the IAM role to be used when making API calls to the Directory Service.
This setting doesn't apply to RDS Custom.
Amazon Aurora
Not applicable. The domain is managed by the DB cluster.
", "CreateDBInstanceMessage$Timezone": "The time zone of the DB instance. The time zone parameter is currently supported only by Microsoft SQL Server.
", "CreateDBInstanceMessage$PerformanceInsightsKMSKeyId": "The Amazon Web Services KMS key identifier for encryption of Performance Insights data.
The Amazon Web Services KMS key identifier is the key ARN, key ID, alias ARN, or alias name for the KMS key.
If you do not specify a value for PerformanceInsightsKMSKeyId, then Amazon RDS uses your default KMS key. There is a default KMS key for your Amazon Web Services account. Your Amazon Web Services account has a different default KMS key for each Amazon Web Services Region.
This setting doesn't apply to RDS Custom.
", "CreateDBInstanceMessage$CustomIamInstanceProfile": "The instance profile associated with the underlying Amazon EC2 instance of an RDS Custom DB instance. The instance profile must meet the following requirements:
The profile must exist in your account.
The profile must have an IAM role that Amazon EC2 has permissions to assume.
The instance profile name and the associated IAM role name must start with the prefix AWSRDSCustom.
For the list of permissions required for the IAM role, see Configure IAM and your VPC in the Amazon RDS User Guide.
This setting is required for RDS Custom.
", @@ -3799,12 +3799,12 @@ "CreateDBInstanceReadReplicaMessage$DBInstanceClass": "The compute and memory capacity of the read replica, for example db.m4.large. Not all DB instance classes are available in all Amazon Web Services Regions, or for all database engines. For the full list of DB instance classes, and availability for your engine, see DB Instance Class in the Amazon RDS User Guide.
Default: Inherits from the source DB instance.
", "CreateDBInstanceReadReplicaMessage$AvailabilityZone": "The Availability Zone (AZ) where the read replica will be created.
Default: A random, system-chosen Availability Zone in the endpoint's Amazon Web Services Region.
Example: us-east-1d
The option group the DB instance is associated with. If omitted, the option group associated with the source instance is used.
For SQL Server, you must use the option group associated with the source instance.
This setting doesn't apply to RDS Custom.
", - "CreateDBInstanceReadReplicaMessage$DBParameterGroupName": "The name of the DB parameter group to associate with this DB instance.
If you do not specify a value for DBParameterGroupName, then Amazon RDS uses the DBParameterGroup of source DB instance for a same Region read replica, or the default DBParameterGroup for the specified DB engine for a cross-Region read replica.
Specifying a parameter group for this operation is only supported for Oracle DB instances. It isn't supported for RDS Custom.
Constraints:
Must be 1 to 255 letters, numbers, or hyphens.
First character must be a letter
Can't end with a hyphen or contain two consecutive hyphens
The name of the DB parameter group to associate with this DB instance.
If you do not specify a value for DBParameterGroupName, then Amazon RDS uses the DBParameterGroup of source DB instance for a same Region read replica, or the default DBParameterGroup for the specified DB engine for a cross-Region read replica.
Specifying a parameter group for this operation is only supported for MySQL and Oracle DB instances. It isn't supported for RDS Custom.
Constraints:
Must be 1 to 255 letters, numbers, or hyphens.
First character must be a letter
Can't end with a hyphen or contain two consecutive hyphens
Specifies a DB subnet group for the DB instance. The new DB instance is created in the VPC associated with the DB subnet group. If no DB subnet group is specified, then the new DB instance isn't created in a VPC.
Constraints:
Can only be specified if the source DB instance identifier specifies a DB instance in another Amazon Web Services Region.
If supplied, must match the name of an existing DBSubnetGroup.
The specified DB subnet group must be in the same Amazon Web Services Region in which the operation is running.
All read replicas in one Amazon Web Services Region that are created from the same source DB instance must either:>
Specify DB subnet groups from the same VPC. All these read replicas are created in the same VPC.
Not specify a DB subnet group. All these read replicas are created outside of any VPC.
Example: mydbsubnetgroup
Specifies the storage type to be associated with the read replica.
Valid values: standard | gp2 | io1
If you specify io1, you must also include a value for the Iops parameter.
Default: io1 if the Iops parameter is specified, otherwise gp2
The ARN for the IAM role that permits RDS to send enhanced monitoring metrics to Amazon CloudWatch Logs. For example, arn:aws:iam:123456789012:role/emaccess. For information on creating a monitoring role, go to To create an IAM role for Amazon RDS Enhanced Monitoring in the Amazon RDS User Guide.
If MonitoringInterval is set to a value other than 0, then you must supply a MonitoringRoleArn value.
This setting doesn't apply to RDS Custom.
", "CreateDBInstanceReadReplicaMessage$KmsKeyId": "The Amazon Web Services KMS key identifier for an encrypted read replica.
The Amazon Web Services KMS key identifier is the key ARN, key ID, alias ARN, or alias name for the KMS key.
If you create an encrypted read replica in the same Amazon Web Services Region as the source DB instance, then do not specify a value for this parameter. A read replica in the same Amazon Web Services Region is always encrypted with the same KMS key as the source DB instance.
If you create an encrypted read replica in a different Amazon Web Services Region, then you must specify a KMS key identifier for the destination Amazon Web Services Region. KMS keys are specific to the Amazon Web Services Region that they are created in, and you can't use KMS keys from one Amazon Web Services Region in another Amazon Web Services Region.
You can't create an encrypted read replica from an unencrypted DB instance.
This setting doesn't apply to RDS Custom, which uses the same KMS key as the primary replica.
", - "CreateDBInstanceReadReplicaMessage$PreSignedUrl": "The URL that contains a Signature Version 4 signed request for the CreateDBInstanceReadReplica API action in the source Amazon Web Services Region that contains the source DB instance.
You must specify this parameter when you create an encrypted read replica from another Amazon Web Services Region by using the Amazon RDS API. Don't specify PreSignedUrl when you are creating an encrypted read replica in the same Amazon Web Services Region.
The presigned URL must be a valid request for the CreateDBInstanceReadReplica API action that can be executed in the source Amazon Web Services Region that contains the encrypted source DB instance. The presigned URL request must contain the following parameter values:
DestinationRegion - The Amazon Web Services Region that the encrypted read replica is created in. This Amazon Web Services Region is the same one where the CreateDBInstanceReadReplica action is called that contains this presigned URL.
For example, if you create an encrypted DB instance in the us-west-1 Amazon Web Services Region, from a source DB instance in the us-east-2 Amazon Web Services Region, then you call the CreateDBInstanceReadReplica action in the us-east-1 Amazon Web Services Region and provide a presigned URL that contains a call to the CreateDBInstanceReadReplica action in the us-west-2 Amazon Web Services Region. For this example, the DestinationRegion in the presigned URL must be set to the us-east-1 Amazon Web Services Region.
KmsKeyId - The Amazon Web Services KMS key identifier for the key to use to encrypt the read replica in the destination Amazon Web Services Region. This is the same identifier for both the CreateDBInstanceReadReplica action that is called in the destination Amazon Web Services Region, and the action contained in the presigned URL.
SourceDBInstanceIdentifier - The DB instance identifier for the encrypted DB instance to be replicated. This identifier must be in the Amazon Resource Name (ARN) format for the source Amazon Web Services Region. For example, if you are creating an encrypted read replica from a DB instance in the us-west-2 Amazon Web Services Region, then your SourceDBInstanceIdentifier looks like the following example: arn:aws:rds:us-west-2:123456789012:instance:mysql-instance1-20161115.
To learn how to generate a Signature Version 4 signed request, see Authenticating Requests: Using Query Parameters (Amazon Web Services Signature Version 4) and Signature Version 4 Signing Process.
If you are using an Amazon Web Services SDK tool or the CLI, you can specify SourceRegion (or --source-region for the CLI) instead of specifying PreSignedUrl manually. Specifying SourceRegion autogenerates a presigned URL that is a valid request for the operation that can be executed in the source Amazon Web Services Region.
SourceRegion isn't supported for SQL Server, because SQL Server on Amazon RDS doesn't support cross-Region read replicas.
This setting doesn't apply to RDS Custom.
", + "CreateDBInstanceReadReplicaMessage$PreSignedUrl": "When you are creating a read replica from one Amazon Web Services GovCloud (US) Region to another or from one China Amazon Web Services Region to another, the URL that contains a Signature Version 4 signed request for the CreateDBInstanceReadReplica API operation in the source Amazon Web Services Region that contains the source DB instance.
This setting applies only to Amazon Web Services GovCloud (US) Regions and China Amazon Web Services Regions. It's ignored in other Amazon Web Services Regions.
You must specify this parameter when you create an encrypted read replica from another Amazon Web Services Region by using the Amazon RDS API. Don't specify PreSignedUrl when you are creating an encrypted read replica in the same Amazon Web Services Region.
The presigned URL must be a valid request for the CreateDBInstanceReadReplica API operation that can run in the source Amazon Web Services Region that contains the encrypted source DB instance. The presigned URL request must contain the following parameter values:
DestinationRegion - The Amazon Web Services Region that the encrypted read replica is created in. This Amazon Web Services Region is the same one where the CreateDBInstanceReadReplica operation is called that contains this presigned URL.
For example, if you create an encrypted DB instance in the us-west-1 Amazon Web Services Region, from a source DB instance in the us-east-2 Amazon Web Services Region, then you call the CreateDBInstanceReadReplica operation in the us-east-1 Amazon Web Services Region and provide a presigned URL that contains a call to the CreateDBInstanceReadReplica operation in the us-west-2 Amazon Web Services Region. For this example, the DestinationRegion in the presigned URL must be set to the us-east-1 Amazon Web Services Region.
KmsKeyId - The KMS key identifier for the key to use to encrypt the read replica in the destination Amazon Web Services Region. This is the same identifier for both the CreateDBInstanceReadReplica operation that is called in the destination Amazon Web Services Region, and the operation contained in the presigned URL.
SourceDBInstanceIdentifier - The DB instance identifier for the encrypted DB instance to be replicated. This identifier must be in the Amazon Resource Name (ARN) format for the source Amazon Web Services Region. For example, if you are creating an encrypted read replica from a DB instance in the us-west-2 Amazon Web Services Region, then your SourceDBInstanceIdentifier looks like the following example: arn:aws:rds:us-west-2:123456789012:instance:mysql-instance1-20161115.
To learn how to generate a Signature Version 4 signed request, see Authenticating Requests: Using Query Parameters (Amazon Web Services Signature Version 4) and Signature Version 4 Signing Process.
If you are using an Amazon Web Services SDK tool or the CLI, you can specify SourceRegion (or --source-region for the CLI) instead of specifying PreSignedUrl manually. Specifying SourceRegion autogenerates a presigned URL that is a valid request for the operation that can run in the source Amazon Web Services Region.
SourceRegion isn't supported for SQL Server, because Amazon RDS for SQL Server doesn't support cross-Region read replicas.
This setting doesn't apply to RDS Custom.
", "CreateDBInstanceReadReplicaMessage$PerformanceInsightsKMSKeyId": "The Amazon Web Services KMS key identifier for encryption of Performance Insights data.
The Amazon Web Services KMS key identifier is the key ARN, key ID, alias ARN, or alias name for the KMS key.
If you do not specify a value for PerformanceInsightsKMSKeyId, then Amazon RDS uses your default KMS key. There is a default KMS key for your Amazon Web Services account. Your Amazon Web Services account has a different default KMS key for each Amazon Web Services Region.
This setting doesn't apply to RDS Custom.
", "CreateDBInstanceReadReplicaMessage$Domain": "The Active Directory directory ID to create the DB instance in. Currently, only MySQL, Microsoft SQL Server, Oracle, and PostgreSQL DB instances can be created in an Active Directory Domain.
For more information, see Kerberos Authentication in the Amazon RDS User Guide.
This setting doesn't apply to RDS Custom.
", "CreateDBInstanceReadReplicaMessage$DomainIAMRoleName": "Specify the name of the IAM role to be used when making API calls to the Directory Service.
This setting doesn't apply to RDS Custom.
", @@ -3828,7 +3828,7 @@ "CreateGlobalClusterMessage$SourceDBClusterIdentifier": "The Amazon Resource Name (ARN) to use as the primary cluster of the global database. This parameter is optional.
", "CreateGlobalClusterMessage$Engine": "The name of the database engine to be used for this DB cluster.
", "CreateGlobalClusterMessage$EngineVersion": "The engine version of the Aurora global database.
", - "CreateGlobalClusterMessage$DatabaseName": "The name for your database of up to 64 alpha-numeric characters. If you do not provide a name, Amazon Aurora will not create a database in the global database cluster you are creating.
", + "CreateGlobalClusterMessage$DatabaseName": "The name for your database of up to 64 alphanumeric characters. If you do not provide a name, Amazon Aurora will not create a database in the global database cluster you are creating.
", "CreateOptionGroupMessage$OptionGroupName": "Specifies the name of the option group to be created.
Constraints:
Must be 1 to 255 letters, numbers, or hyphens
First character must be a letter
Can't end with a hyphen or contain two consecutive hyphens
Example: myoptiongroup
Specifies the name of the engine that this option group should be associated with.
Valid Values:
mariadb
mysql
oracle-ee
oracle-ee-cdb
oracle-se2
oracle-se2-cdb
postgres
sqlserver-ee
sqlserver-se
sqlserver-ex
sqlserver-web
Specifies the major version of the engine that this option group should be associated with.
", @@ -4258,11 +4258,11 @@ "ModifyDBClusterMessage$PerformanceInsightsKMSKeyId": "The Amazon Web Services KMS key identifier for encryption of Performance Insights data.
The Amazon Web Services KMS key identifier is the key ARN, key ID, alias ARN, or alias name for the KMS key.
If you don't specify a value for PerformanceInsightsKMSKeyId, then Amazon RDS uses your default KMS key. There is a default KMS key for your Amazon Web Services account. Your Amazon Web Services account has a different default KMS key for each Amazon Web Services Region.
Valid for: Multi-AZ DB clusters only
", "ModifyDBClusterParameterGroupMessage$DBClusterParameterGroupName": "The name of the DB cluster parameter group to modify.
", "ModifyDBClusterSnapshotAttributeMessage$DBClusterSnapshotIdentifier": "The identifier for the DB cluster snapshot to modify the attributes for.
", - "ModifyDBClusterSnapshotAttributeMessage$AttributeName": "The name of the DB cluster snapshot attribute to modify.
To manage authorization for other Amazon Web Services accounts to copy or restore a manual DB cluster snapshot, set this value to restore.
To view the list of attributes available to modify, use the DescribeDBClusterSnapshotAttributes API action.
The name of the DB cluster snapshot attribute to modify.
To manage authorization for other Amazon Web Services accounts to copy or restore a manual DB cluster snapshot, set this value to restore.
To view the list of attributes available to modify, use the DescribeDBClusterSnapshotAttributes API operation.
The DB instance identifier. This value is stored as a lowercase string.
Constraints:
Must match the identifier of an existing DBInstance.
The new compute and memory capacity of the DB instance, for example db.m4.large. Not all DB instance classes are available in all Amazon Web Services Regions, or for all database engines. For the full list of DB instance classes, and availability for your engine, see DB Instance Class in the Amazon RDS User Guide.
If you modify the DB instance class, an outage occurs during the change. The change is applied during the next maintenance window, unless ApplyImmediately is enabled for this request.
This setting doesn't apply to RDS Custom for Oracle.
Default: Uses existing setting
", + "ModifyDBInstanceMessage$DBInstanceClass": "The new compute and memory capacity of the DB instance, for example db.m5.large. Not all DB instance classes are available in all Amazon Web Services Regions, or for all database engines. For the full list of DB instance classes, and availability for your engine, see DB instance classes in the Amazon RDS User Guide or Aurora DB instance classes in the Amazon Aurora User Guide.
If you modify the DB instance class, an outage occurs during the change. The change is applied during the next maintenance window, unless ApplyImmediately is enabled for this request.
This setting doesn't apply to RDS Custom for Oracle.
Default: Uses existing setting
", "ModifyDBInstanceMessage$DBSubnetGroupName": "The new DB subnet group for the DB instance. You can use this parameter to move your DB instance to a different VPC. If your DB instance isn't in a VPC, you can also use this parameter to move your DB instance into a VPC. For more information, see Working with a DB instance in a VPC in the Amazon RDS User Guide.
Changing the subnet group causes an outage during the change. The change is applied during the next maintenance window, unless you enable ApplyImmediately.
This parameter doesn't apply to RDS Custom.
Constraints: If supplied, must match the name of an existing DBSubnetGroup.
Example: mydbsubnetgroup
The new password for the master user. The password can include any printable ASCII character except \"/\", \"\"\", or \"@\".
Changing this parameter doesn't result in an outage and the change is asynchronously applied as soon as possible. Between the time of the request and the completion of the request, the MasterUserPassword element exists in the PendingModifiedValues element of the operation response.
This setting doesn't apply to RDS Custom.
Amazon Aurora
Not applicable. The password for the master user is managed by the DB cluster. For more information, see ModifyDBCluster.
Default: Uses existing setting
MariaDB
Constraints: Must contain from 8 to 41 characters.
Microsoft SQL Server
Constraints: Must contain from 8 to 128 characters.
MySQL
Constraints: Must contain from 8 to 41 characters.
Oracle
Constraints: Must contain from 8 to 30 characters.
PostgreSQL
Constraints: Must contain from 8 to 128 characters.
Amazon RDS API actions never return the password, so this action provides a way to regain access to a primary instance user if the password is lost. This includes restoring privileges that might have been accidentally revoked.
The new password for the master user. The password can include any printable ASCII character except \"/\", \"\"\", or \"@\".
Changing this parameter doesn't result in an outage and the change is asynchronously applied as soon as possible. Between the time of the request and the completion of the request, the MasterUserPassword element exists in the PendingModifiedValues element of the operation response.
This setting doesn't apply to RDS Custom.
Amazon Aurora
Not applicable. The password for the master user is managed by the DB cluster. For more information, see ModifyDBCluster.
Default: Uses existing setting
MariaDB
Constraints: Must contain from 8 to 41 characters.
Microsoft SQL Server
Constraints: Must contain from 8 to 128 characters.
MySQL
Constraints: Must contain from 8 to 41 characters.
Oracle
Constraints: Must contain from 8 to 30 characters.
PostgreSQL
Constraints: Must contain from 8 to 128 characters.
Amazon RDS API operations never return the password, so this action provides a way to regain access to a primary instance user if the password is lost. This includes restoring privileges that might have been accidentally revoked.
The name of the DB parameter group to apply to the DB instance.
Changing this setting doesn't result in an outage. The parameter group name itself is changed immediately, but the actual parameter changes are not applied until you reboot the instance without failover. In this case, the DB instance isn't rebooted automatically, and the parameter changes aren't applied during the next maintenance window. However, if you modify dynamic parameters in the newly associated DB parameter group, these changes are applied immediately without a reboot.
This setting doesn't apply to RDS Custom.
Default: Uses existing setting
Constraints: The DB parameter group must be in the same DB parameter group family as the DB instance.
", "ModifyDBInstanceMessage$PreferredBackupWindow": "The daily time range during which automated backups are created if automated backups are enabled, as determined by the BackupRetentionPeriod parameter. Changing this parameter doesn't result in an outage and the change is asynchronously applied as soon as possible. The default is a 30-minute window selected at random from an 8-hour block of time for each Amazon Web Services Region. For more information, see Backup window in the Amazon RDS User Guide.
Amazon Aurora
Not applicable. The daily time range for creating automated backups is managed by the DB cluster. For more information, see ModifyDBCluster.
Constraints:
Must be in the format hh24:mi-hh24:mi
Must be in Universal Time Coordinated (UTC)
Must not conflict with the preferred maintenance window
Must be at least 30 minutes
The weekly time range (in UTC) during which system maintenance can occur, which might result in an outage. Changing this parameter doesn't result in an outage, except in the following situation, and the change is asynchronously applied as soon as possible. If there are pending actions that cause a reboot, and the maintenance window is changed to include the current time, then changing this parameter will cause a reboot of the DB instance. If moving this window to the current time, there must be at least 30 minutes between the current time and end of the window to ensure pending changes are applied.
For more information, see Amazon RDS Maintenance Window in the Amazon RDS User Guide.
Default: Uses existing setting
Format: ddd:hh24:mi-ddd:hh24:mi
Valid Days: Mon | Tue | Wed | Thu | Fri | Sat | Sun
Constraints: Must be at least 30 minutes
", @@ -4283,11 +4283,11 @@ "ModifyDBProxyRequest$DBProxyName": "The identifier for the DBProxy to modify.
The new identifier for the DBProxy. An identifier must begin with a letter and must contain only ASCII letters, digits, and hyphens; it can't end with a hyphen or contain two consecutive hyphens.
The Amazon Resource Name (ARN) of the IAM role that the proxy uses to access secrets in Amazon Web Services Secrets Manager.
", - "ModifyDBProxyTargetGroupRequest$TargetGroupName": "The name of the new target group to assign to the proxy.
", - "ModifyDBProxyTargetGroupRequest$DBProxyName": "The name of the new proxy to which to assign the target group.
", + "ModifyDBProxyTargetGroupRequest$TargetGroupName": "The name of the target group to modify.
", + "ModifyDBProxyTargetGroupRequest$DBProxyName": "The name of the proxy.
", "ModifyDBProxyTargetGroupRequest$NewName": "The new name for the modified DBProxyTarget. An identifier must begin with a letter and must contain only ASCII letters, digits, and hyphens; it can't end with a hyphen or contain two consecutive hyphens.
The identifier for the DB snapshot to modify the attributes for.
", - "ModifyDBSnapshotAttributeMessage$AttributeName": "The name of the DB snapshot attribute to modify.
To manage authorization for other Amazon Web Services accounts to copy or restore a manual DB snapshot, set this value to restore.
To view the list of attributes available to modify, use the DescribeDBSnapshotAttributes API action.
The name of the DB snapshot attribute to modify.
To manage authorization for other Amazon Web Services accounts to copy or restore a manual DB snapshot, set this value to restore.
To view the list of attributes available to modify, use the DescribeDBSnapshotAttributes API operation.
The identifier of the DB snapshot to modify.
", "ModifyDBSnapshotMessage$EngineVersion": "The engine version to upgrade the DB snapshot to.
The following are the database engines and engine versions that are available when you upgrade a DB snapshot.
MySQL
5.5.46 (supported for 5.1 DB snapshots)
Oracle
12.1.0.2.v8 (supported for 12.1.0.1 DB snapshots)
11.2.0.4.v12 (supported for 11.2.0.2 DB snapshots)
11.2.0.4.v11 (supported for 11.2.0.3 DB snapshots)
PostgreSQL
For the list of engine versions that are available for upgrading a DB snapshot, see Upgrading the PostgreSQL DB Engine for Amazon RDS.
", "ModifyDBSnapshotMessage$OptionGroupName": "The option group to identify with the upgraded DB snapshot.
You can specify this parameter when you upgrade an Oracle DB snapshot. The same option group considerations apply when upgrading a DB snapshot as when upgrading a DB instance. For more information, see Option group considerations in the Amazon RDS User Guide.
", @@ -4415,8 +4415,8 @@ "RestoreDBClusterFromS3Message$DBClusterIdentifier": "The name of the DB cluster to create from the source data in the Amazon S3 bucket. This parameter isn't case-sensitive.
Constraints:
Must contain from 1 to 63 letters, numbers, or hyphens.
First character must be a letter.
Can't end with a hyphen or contain two consecutive hyphens.
Example: my-cluster1
The name of the DB cluster parameter group to associate with the restored DB cluster. If this argument is omitted, default.aurora5.6 is used.
Constraints:
If supplied, must match the name of an existing DBClusterParameterGroup.
A DB subnet group to associate with the restored DB cluster.
Constraints: If supplied, must match the name of an existing DBSubnetGroup.
Example: mydbsubnetgroup
The name of the database engine to be used for this DB cluster.
Valid Values: aurora (for MySQL 5.6-compatible Aurora), aurora-mysql (for MySQL 5.7-compatible and MySQL 8.0-compatible Aurora), and aurora-postgresql
The version number of the database engine to use.
To list all of the available engine versions for aurora (for MySQL 5.6-compatible Aurora), use the following command:
aws rds describe-db-engine-versions --engine aurora --query \"DBEngineVersions[].EngineVersion\"
To list all of the available engine versions for aurora-mysql (for MySQL 5.7-compatible and MySQL 8.0-compatible Aurora), use the following command:
aws rds describe-db-engine-versions --engine aurora-mysql --query \"DBEngineVersions[].EngineVersion\"
To list all of the available engine versions for aurora-postgresql, use the following command:
aws rds describe-db-engine-versions --engine aurora-postgresql --query \"DBEngineVersions[].EngineVersion\"
Aurora MySQL
Example: 5.6.10a, 5.6.mysql_aurora.1.19.2, 5.7.12, 5.7.mysql_aurora.2.04.5, 8.0.mysql_aurora.3.01.0
Aurora PostgreSQL
Example: 9.6.3, 10.7
The name of the database engine to be used for this DB cluster.
Valid Values: aurora (for MySQL 5.6-compatible Aurora) and aurora-mysql (for MySQL 5.7-compatible and MySQL 8.0-compatible Aurora)
The version number of the database engine to use.
To list all of the available engine versions for aurora (for MySQL 5.6-compatible Aurora), use the following command:
aws rds describe-db-engine-versions --engine aurora --query \"DBEngineVersions[].EngineVersion\"
To list all of the available engine versions for aurora-mysql (for MySQL 5.7-compatible and MySQL 8.0-compatible Aurora), use the following command:
aws rds describe-db-engine-versions --engine aurora-mysql --query \"DBEngineVersions[].EngineVersion\"
Aurora MySQL
Example: 5.6.10a, 5.6.mysql_aurora.1.19.2, 5.7.mysql_aurora.2.07.1, 8.0.mysql_aurora.3.02.0
The name of the master user for the restored DB cluster.
Constraints:
Must be 1 to 16 letters or numbers.
First character must be a letter.
Can't be a reserved word for the chosen database engine.
The password for the master database user. This password can contain any printable ASCII character except \"/\", \"\"\", or \"@\".
Constraints: Must contain from 8 to 41 characters.
", "RestoreDBClusterFromS3Message$OptionGroupName": "A value that indicates that the restored DB cluster should be associated with the specified option group.
Permanent options can't be removed from an option group. An option group can't be removed from a DB cluster once it is associated with a DB cluster.
", @@ -4537,7 +4537,7 @@ "StartDBClusterMessage$DBClusterIdentifier": "The DB cluster identifier of the Amazon Aurora DB cluster to be started. This parameter is stored as a lowercase string.
", "StartDBInstanceAutomatedBackupsReplicationMessage$SourceDBInstanceArn": "The Amazon Resource Name (ARN) of the source DB instance for the replicated automated backups, for example, arn:aws:rds:us-west-2:123456789012:db:mydatabase.
The Amazon Web Services KMS key identifier for encryption of the replicated automated backups. The KMS key ID is the Amazon Resource Name (ARN) for the KMS encryption key in the destination Amazon Web Services Region, for example, arn:aws:kms:us-east-1:123456789012:key/AKIAIOSFODNN7EXAMPLE.
A URL that contains a Signature Version 4 signed request for the StartDBInstanceAutomatedBackupsReplication action to be called in the Amazon Web Services Region of the source DB instance. The presigned URL must be a valid request for the StartDBInstanceAutomatedBackupsReplication API action that can be executed in the Amazon Web Services Region that contains the source DB instance.
", + "StartDBInstanceAutomatedBackupsReplicationMessage$PreSignedUrl": "In an Amazon Web Services GovCloud (US) Region, an URL that contains a Signature Version 4 signed request for the StartDBInstanceAutomatedBackupsReplication operation to call in the Amazon Web Services Region of the source DB instance. The presigned URL must be a valid request for the StartDBInstanceAutomatedBackupsReplication API operation that can run in the Amazon Web Services Region that contains the source DB instance.
This setting applies only to Amazon Web Services GovCloud (US) Regions. It's ignored in other Amazon Web Services Regions.
To learn how to generate a Signature Version 4 signed request, see Authenticating Requests: Using Query Parameters (Amazon Web Services Signature Version 4) and Signature Version 4 Signing Process.
If you are using an Amazon Web Services SDK tool or the CLI, you can specify SourceRegion (or --source-region for the CLI) instead of specifying PreSignedUrl manually. Specifying SourceRegion autogenerates a presigned URL that is a valid request for the operation that can run in the source Amazon Web Services Region.
The user-supplied instance identifier.
", "StartExportTaskMessage$ExportTaskIdentifier": "A unique identifier for the snapshot export task. This ID isn't an identifier for the Amazon S3 bucket where the snapshot is to be exported to.
", "StartExportTaskMessage$SourceArn": "The Amazon Resource Name (ARN) of the snapshot to export to Amazon S3.
", @@ -4572,7 +4572,7 @@ "ValidStorageOptions$StorageType": "The valid storage types for your DB instance. For example, gp2, io1.
", "VpcSecurityGroupIdList$member": null, "VpcSecurityGroupMembership$VpcSecurityGroupId": "The name of the VPC security group.
", - "VpcSecurityGroupMembership$Status": "The status of the VPC security group.
" + "VpcSecurityGroupMembership$Status": "The membership status of the VPC security group.
Currently, the only valid status is active.