Skip to content

Latest commit

 

History

History
227 lines (164 loc) · 9.15 KB

faq.md

File metadata and controls

227 lines (164 loc) · 9.15 KB

FAQ

Terminology

For nextpnr we are using the following terminology.

Design Database Terminology

  • Cell: an instantiation of a physical block inside the netlist. The packer may combine or otherwise modify cells; and the placer places them onto Bels.
  • Port: an input or output of a Cell, can be connected to a single net.
  • Net: a connection between cell ports inside the netlist. One net will be routed using one or more wires inside the chip. Nets are always one bit in size, multibit nets are always split.
  • Source: The cell output port driving a given net
  • Sink: A cell input port driven by a given net
  • Arc: A source-sink-pair on a net

Architecture Database Terminology

  • Bel: Basic Element, the functional blocks of an FPGA such as logic cells, IO cells, blockrams, etc. Up to one cell may be placed at each Bel.
  • Pin: an input or output of a Bel, permanently connected to a single wire.
  • Pip: Programmable Interconnect Point, a configurable connection in one direction between two wires
  • Wire: a fixed physical connection inside the FPGA between Pips and/or Bel pins.
  • Alias: a special automatic-on Pip to represent a permanent connection between two wires
  • Group: a collection of bels, pips, wires, and/or other groups
  • BelBucket: a collection of bels and cell types. All of the bel buckets form a set cover of bels and cell types.

Flow Terminology

  • Packing: The action of grouping cells in synthesis output into larger (logic) cells
  • Placing: The action of binding packed cells to Bels
  • Routing: The action of binding nets to wires

Other Terminology

  • Binding: Assigning nets to wires and cells to Bels
  • Path: All the arcs connecting a FF output (or primary input) to a FF input (or primary output)

Adding new architectures to nextpnr

Implementing new architectures

Each nextpnr architecture must implement the nextpnr architecture API. See archapi.md for a complete reference of the architecture API.

Delay Estimates

Each architecture must implement a estimateDelay() method that estimates the expected delay for a path from given src to dst wires. It is very important that this method slightly overestimates the expected delay. Furthermore, it should overestimate the expected delay by a slightly larger margin for longer paths than for shorter paths. Otherwise there will be performance issues with the router.

The delays estimates returned by that method should also be as fine-grain as possible. It definitely pays off to spend some time improving the estimateDelay() for your architecture once implementing small designs work.

Ripup Information

The getConflictingWireWire(), getConflictingWireNet(), getConflictingPipWire(), and getConflictingPipNet() methods are used by the router to determine which resources to rip up in order to make a given routing resource (wire or pip) available.

The architecture must guarantee that the following invariants hold.

Invariant 1:

    if (!ctx->checkWireAvail(wire)) {
        WireId w = getConflictingWireWire(wire);
        if (w != WireId()) {
            ctx->unbindWire(w);
            assert(ctx->checkWireAvail(wire));
        }
    }

Invariant 2:

    if (!ctx->checkWireAvail(wire)) {
        NetInfo *n = getConflictingWireNet(wire);
        if (n != nullptr) {
            for (auto &it : n->wires)
                ctx->unbindWire(it.first);
            assert(ctx->checkWireAvail(wire));
        }
    }

Invariant 3:

    if (!ctx->checkPipAvail(pip)) {
        WireId w = getConflictingPipWire(pip);
        if (w != WireId()) {
            ctx->unbindWire(w);
            assert(ctx->checkPipAvail(pip));
        }
    }

Invariant 4:

    if (!ctx->checkPipAvail(pip)) {
        NetInfo *n = getConflictingPipNet(pip);
        if (n != nullptr) {
            for (auto &it : n->wires)
                ctx->unbindWire(it.first);
            assert(ctx->checkPipAvail(pip));
        }
    }

Invariant 5:

    if (ctx->checkWireAvail(wire)) {
        // bind is guaranteed to succeed
        ctx->bindWire(wire, net, strength);
    }

Invariant 6:

    if (ctx->checkPipAvail(pip) && ctx->checkWireAvail(ctx->getPipDstWire(pip))) {
        // bind is guaranteed to succeed
        ctx->bindPip(pip, net, strength);
    }

Nextpnr and other tools

Which toolchain should I use and why?

  • If you wish to do new research into FPGA architectures, or other similar topics, we suggest you look at using Verilog to Routing. If you want to use nextpnr, you might also be able to use the Generic Arch.

  • If you are developing FPGA code in Verilog for a Lattice iCE40 and need an open source toolchain, we suggest you use Yosys and nextpnr.

  • If you are developing FPGA code in Verilog for a Lattice iCE40 with Yosys and the existing arachne-pnr toolchain, we suggest you start thinking about migrating to nextpnr.

  • If you are developing Verilog FPGA code targeted at the Lattice ECP5 and need an open source toolchain, there is also stable ECP5 support in Yosys and nextpnr.

  • If you are developing FPGA code in VHDL you may wish to look at the ghdlsynth-beta experimental VHDL frontend for Yosys.

Why didn't you just improve arachne-pnr?

arachne-pnr was originally developed as part of Project IceStorm to demonstrate it was possible to create an open source place and route tool for the iCE40 FPGAs that actually produced valid bitstreams.

For its original purpose, it has served the community extremely well. However, it was never designed to support multiple different FPGA families, nor more complicated timing driven placement and routing used by most commercial place and route tools.

It felt like extending arachne-pnr was not going to be the best path forward, so it was decided to build nextpnr as replacement.

arachne-pnr does X better!

If you have a use case which prevents you from switching to nextpnr from arachne, we want to hear about it! Please create an issue and we will do our best to solve the problem!

We want nextpnr to be a suitable replacement for anyone who is currently a user of arachne-pnr, and it is important to bear in mind that arachne-pnr is no longer in active development.

Why are you not just contributing to Verilog to Routing?

We believe that Verilog to Routing is a great toolchain and many of the nextpnr developers have made (and continue to make) contributions to the project.

VtR is an extremely flexible toolchain but focuses on research around FPGA architecture and algorithm development. If your goal is research, then we very much encourage you to look into VtR further!

nextpnr takes a different approach by focusing on users developing FPGA code for current FPGAs.

We also believe that support for real architectures will enable interesting new research. nextpnr (like all place and route tools) depends heavily on research groups like the VtR developers to investigate and push forward FPGA placement and routing algorithms in new and exciting ways.

What is VPR?

VPR is the "place and route" tool from Verilog To Routing. It has a similar role in an FPGA development flow as nextpnr.

What about SymbiFlow?

For the moment SymbiFlow is concentrating on extending VPR to work with real world architectures. nextpnr may or may not become a part of SymbiFlow in the future.

Project Trellis is the effort to document the bitstream format for the Lattice ECP5 series of FPGAs. It also includes tools for ECP5 bitstream generation.

Project Trellis is used by nextpnr to build the ECP5 chip database and enable support for creation of bitstreams for these parts.

What is Project X-Ray?

Project X-Ray is the effort to document the bitstream format for the Xilinx Series 7 series of FPGAs. It also includes tooling around bitstream generation for these parts.

While upstream nextpnr currently does not support these Xilinx parts, we expect it might soon be using Project X-Ray in a similar manner to Project Trellis.

Project IceStorm is both a project to document the bitstream for the Lattice iCE40 series of parts and a full flow including Yosys and arachne-pnr for converting Verilog into a bitstream for these parts.

As the open source community now has support for multiple different FPGA parts, in the nextpnr documentation we generally use Project IceStorm to mean the database and tools that fulfill the same role as Project Trellis or Project X-Ray.