Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Kdenlive Compilation Error #136

Open
VehementHam opened this issue Apr 9, 2024 · 0 comments
Open

Kdenlive Compilation Error #136

VehementHam opened this issue Apr 9, 2024 · 0 comments

Comments

@VehementHam
Copy link

VehementHam commented Apr 9, 2024 •
edited

When I compile Kdenlive on Alpine Linux, I get the following error:

Illegal option --
Illegal option -e
Illegal option --
Illegal option -e
=> Bootstrap dependency digest>=20211023: found digest-20220214
=> Checksum BLAKE2s OK for kdenlive-23.08.4.tar.xz
=> Checksum SHA512 OK for kdenlive-23.08.4.tar.xz
===> Installing dependencies for kdenlive-23.08.4
==========================================================================
The following variables will affect the build process of this package,
kdenlive-23.08.4.  Their current value is shown below:

        * JPEG_DEFAULT = jpeg
        * SSLBASE (defined)
        * SSLCERTBUNDLE (not defined)
        * SSLCERTS = /usr/pkg/etc/openssl/certs
        * SSLDIR = /usr/pkg/etc/openssl
        * SSLKEYS = /usr/pkg/etc/openssl/private

Based on these variables, the following variables have been set:

        * JPEGBASE (defined, but empty)
        * JPEG_TYPE = jpeg

You may want to abort the process now with CTRL-C and change the value
of variables in the first group before continuing.  Be sure to run
`/usr/pkg/bin/bmake clean' after the changes.
==========================================================================
=> Tool dependency extra-cmake-modules>=5.19.0: found extra-cmake-modules-6.0.0
=> Tool dependency cmake>=0: found cmake-3.28.4
=> Tool dependency kdoctools>=5.19.0: NOT found
=> Verifying package-install for ../../devel/kdoctools
=> Bootstrap dependency digest>=20211023: found digest-20220214
=> Checksum BLAKE2s OK for kdoctools-5.114.0.tar.xz
=> Checksum SHA512 OK for kdoctools-5.114.0.tar.xz
===> Installing dependencies for kdoctools-5.114.0
==========================================================================
The following variables will affect the build process of this package,
kdoctools-5.114.0.  Their current value is shown below:

        * JPEG_DEFAULT = jpeg
        * SSLBASE (defined)
        * SSLCERTBUNDLE (not defined)
        * SSLCERTS = /usr/pkg/etc/openssl/certs
        * SSLDIR = /usr/pkg/etc/openssl
        * SSLKEYS = /usr/pkg/etc/openssl/private

Based on these variables, the following variables have been set:

        * JPEGBASE (defined, but empty)
        * JPEG_TYPE = jpeg

You may want to abort the process now with CTRL-C and change the value
of variables in the first group before continuing.  Be sure to run
`/usr/pkg/bin/bmake clean' after the changes.
==========================================================================
=> Tool dependency extra-cmake-modules>=5.114.0: found extra-cmake-modules-6.0.0
=> Tool dependency cmake>=0: found cmake-3.28.4
=> Tool dependency p5-URI-[0-9]*: found p5-URI-5.27
=> Tool dependency glib2-tools-[0-9]*: found glib2-tools-2.78.4
=> Tool dependency mktools-[0-9]*: found mktools-20220614
=> Tool dependency gettext-tools>=0.15: found gettext-tools-0.22.5
=> Tool dependency perl>=5.0: found perl-5.38.2
=> Tool dependency cwrappers>=20150314: found cwrappers-20220403
=> Build dependency xorgproto>=2016.1: found xorgproto-2023.2
=> Build dependency xcb-proto>=1.15.2nb3: found xcb-proto-1.16.0nb1
=> Full dependency docbook-xsl-[0-9]*: found docbook-xsl-1.79.2nb7
=> Full dependency karchive>=5.108.0nb4: NOT found
=> Verifying package-install for ../../archivers/karchive
=> Bootstrap dependency digest>=20211023: found digest-20220214
=> Checksum BLAKE2s OK for karchive-5.114.0.tar.xz
=> Checksum SHA512 OK for karchive-5.114.0.tar.xz
===> Installing dependencies for karchive-5.114.0
==========================================================================
The following variables will affect the build process of this package,
karchive-5.114.0.  Their current value is shown below:

        * JPEG_DEFAULT = jpeg
        * SSLBASE (defined)
        * SSLCERTBUNDLE (not defined)
        * SSLCERTS = /usr/pkg/etc/openssl/certs
        * SSLDIR = /usr/pkg/etc/openssl
        * SSLKEYS = /usr/pkg/etc/openssl/private

Based on these variables, the following variables have been set:

        * JPEGBASE (defined, but empty)
        * JPEG_TYPE = jpeg

You may want to abort the process now with CTRL-C and change the value
of variables in the first group before continuing.  Be sure to run
`/usr/pkg/bin/bmake clean' after the changes.
==========================================================================
=> Tool dependency extra-cmake-modules>=5.114.0: found extra-cmake-modules-6.0.0
=> Tool dependency cmake>=0: found cmake-3.28.4
=> Tool dependency glib2-tools-[0-9]*: found glib2-tools-2.78.4
=> Tool dependency mktools-[0-9]*: found mktools-20220614
=> Tool dependency pkgconf-[0-9]*: found pkgconf-2.1.1
=> Tool dependency cwrappers>=20150314: found cwrappers-20220403
=> Build dependency xorgproto>=2016.1: found xorgproto-2023.2
=> Build dependency xcb-proto>=1.15.2nb3: found xcb-proto-1.16.0nb1
=> Full dependency bzip2>=1.0.3: found bzip2-1.0.8
=> Full dependency xz>=5.0.0: found xz-5.6.1
=> Full dependency zstd>=1.3.6: found zstd-1.5.5
=> Full dependency zlib>=1.2.3: found zlib-1.3.1
=> Full dependency qt5-qtbase>=5.15.11nb4: NOT found
=> Verifying package-install for ../../x11/qt5-qtbase
=> Bootstrap dependency digest>=20211023: found digest-20220214
=> Checksum BLAKE2s OK for qtbase-everywhere-opensource-src-5.15.13.tar.xz
=> Checksum SHA512 OK for qtbase-everywhere-opensource-src-5.15.13.tar.xz
===> Installing dependencies for qt5-qtbase-5.15.13
==========================================================================
The supported build options for qt5-qtbase are:

	cups dbus gtk3

The currently selected options are:

	cups dbus

You can select which build options to use by setting PKG_DEFAULT_OPTIONS
or the following variable.  Its current value is shown:

	PKG_OPTIONS.qt5 (not defined)

==========================================================================
==========================================================================
The following variables will affect the build process of this package,
qt5-qtbase-5.15.13.  Their current value is shown below:

        * BDB185_DEFAULT = db4
        * BDB_DEFAULT = db4
        * JPEG_DEFAULT = jpeg
        * KRB5_DEFAULT = heimdal
        * SSLBASE (defined)
        * SSLCERTBUNDLE (not defined)
        * SSLCERTS = /usr/pkg/etc/openssl/certs
        * SSLDIR = /usr/pkg/etc/openssl
        * SSLKEYS = /usr/pkg/etc/openssl/private

Based on these variables, the following variables have been set:

        * BDBBASE (defined, but empty)
        * BDB_LIBS = -ldb4
        * BDB_TYPE = db4
        * JPEGBASE (defined, but empty)
        * JPEG_TYPE = jpeg
        * KRB5BASE (defined, but empty)
        * KRB5_TYPE = heimdal

You may want to abort the process now with CTRL-C and change the value
of variables in the first group before continuing.  Be sure to run
`/usr/pkg/bin/bmake clean' after the changes.
==========================================================================
=> Tool dependency glib2-tools-[0-9]*: found glib2-tools-2.78.4
=> Tool dependency mktools-[0-9]*: found mktools-20220614
=> Tool dependency bsdtar-[0-9]*: found bsdtar-3.7.2
=> Tool dependency nbpatch-[0-9]*: found nbpatch-20151107
=> Tool dependency perl>=5.0: found perl-5.38.2
=> Tool dependency pkgconf-[0-9]*: found pkgconf-2.1.1
=> Tool dependency cwrappers>=20150314: found cwrappers-20220403
=> Build dependency xorgproto>=2016.1: found xorgproto-2023.2
=> Build dependency xcb-proto>=1.15.2nb3: found xcb-proto-1.16.0nb1
=> Full dependency libcups>=2.4.6nb4: NOT found
=> Verifying package-install for ../../print/libcups
=> Bootstrap dependency digest>=20211023: found digest-20220214
=> Checksum BLAKE2s OK for cups-2.4.6-source.tar.gz
=> Checksum SHA512 OK for cups-2.4.6-source.tar.gz
===> Installing dependencies for libcups-2.4.6nb4
==========================================================================
The supported build options for libcups are:

	acl avahi dbus dnssd kerberos tcpwrappers

The currently selected options are:

	dbus dnssd kerberos

You can select which build options to use by setting PKG_DEFAULT_OPTIONS
or the following variable.  Its current value is shown:

	PKG_OPTIONS.libcups (not defined)

==========================================================================
==========================================================================
The following variables will affect the build process of this package,
libcups-2.4.6nb4.  Their current value is shown below:

        * BDB185_DEFAULT = db4
        * BDB_DEFAULT = db4
        * CURSES_DEFAULT = ncurses
        * JPEG_DEFAULT = jpeg
        * KRB5_DEFAULT = heimdal
        * SSLBASE (defined)
        * SSLCERTBUNDLE (not defined)
        * SSLCERTS = /usr/pkg/etc/openssl/certs
        * SSLDIR = /usr/pkg/etc/openssl
        * SSLKEYS = /usr/pkg/etc/openssl/private
        * VARBASE = /var

Based on these variables, the following variables have been set:

        * BDBBASE (defined, but empty)
        * BDB_LIBS = -ldb4
        * BDB_TYPE = db4
        * CURSES_TYPE = ncurses
        * JPEGBASE (defined, but empty)
        * JPEG_TYPE = jpeg
        * KRB5BASE (defined, but empty)
        * KRB5_TYPE = heimdal

You may want to abort the process now with CTRL-C and change the value
of variables in the first group before continuing.  Be sure to run
`/usr/pkg/bin/bmake clean' after the changes.
==========================================================================
=> Tool dependency mktools-[0-9]*: found mktools-20220614
=> Tool dependency automake>=1.9: found automake-1.16.5nb3
=> Tool dependency autoconf>=2.71: found autoconf-2.72
=> Tool dependency nbpatch-[0-9]*: found nbpatch-20151107
=> Tool dependency pkgconf-[0-9]*: found pkgconf-2.1.1
=> Tool dependency cwrappers>=20150314: found cwrappers-20220403
=> Full dependency dbus>=0.91: found dbus-1.14.10
=> Full dependency mDNSResponder>=214.3.2: NOT found
=> Verifying package-install for ../../net/mDNSResponder
=> Bootstrap dependency digest>=20211023: found digest-20220214
===> Checking for vulnerabilities in mDNSResponder-258.14nb3
Package mDNSResponder-258.14nb3 has a denial-of-service vulnerability, see https://www.kb.cert.org/vuls/id/143335
===> Building for mDNSResponder-258.14nb3
Responder daemon done
Client library done
Clients done
Embedded Standalone Client done
Embedded Standalone Responder done
Embedded Standalone ProxyResponder done
Identify done
NetMonitor done
dnsextd done
cc -O2 -I/usr/include -I/usr/pkg/include -I../mDNSCore -I../mDNSShared -Iobjects/prod -fwrapv -W -Wall -DPID_FILE=\"/var/run/mdnsd.pid\" -DMDNS_UDS_SERVERPATH=\"/var/run/mdnsd\" -DNOT_HAVE_SA_LEN -DUSES_NETLINK -DHAVE_LINUX -DTARGET_OS_LINUX -D_GNU_SOURCE -DHAVE_IPV6=1 -DMDNS_DEBUGMSGS=0 -c -fPIC -o objects/prod/nss_mdns.c.so.o nss_mdns.c
nss_mdns.c:382:10: fatal error: nss.h: No such file or directory
  382 | #include <nss.h>
      |          ^~~~~~~
compilation terminated.
make: *** [Makefile:504: objects/prod/nss_mdns.c.so.o] Error 1
*** Error code 2

Stop.
bmake[6]: stopped in /home/vehementham/.Git/pkgsrc/net/mDNSResponder
*** Error code 1

Stop.
bmake[5]: stopped in /home/vehementham/.Git/pkgsrc/net/mDNSResponder
*** Error code 1

Stop.
bmake[4]: stopped in /home/vehementham/.Git/pkgsrc/print/libcups
*** Error code 1

Stop.
bmake[3]: stopped in /home/vehementham/.Git/pkgsrc/x11/qt5-qtbase
*** Error code 1

Stop.
bmake[2]: stopped in /home/vehementham/.Git/pkgsrc/archivers/karchive
*** Error code 1

Stop.
bmake[1]: stopped in /home/vehementham/.Git/pkgsrc/devel/kdoctools
*** Error code 1

Stop.
bmake: stopped in /home/vehementham/.Git/pkgsrc/multimedia/kdenlive
netbsd-srcmastr pushed a commit that referenced this issue May 6, 2024
net/slumber: update to 1.1.0
de16950 
[1.1.0] - 2024-05-05

Added
- Add `section` field to `!request` chain values, to allow chaining response headers rather than body ([#184](LucasPickering/slumber#184))
- Add action to save response body to file ([#183](LucasPickering/slumber#183))
- Add `theme` field to the config, to configure colors ([#193](LucasPickering/slumber#193))
  - [See docs](https://slumber.lucaspickering.me/book/api/configuration/theme.html) for more info
- Add `stdin` option to command chains ([#190](LucasPickering/slumber#190))

Changed
- Reduce UI latency under certain scenarios
  - Previously some actions would feel laggy because of an inherent 250ms delay in processing some events
- Search parent directories for collection file ([#194](LucasPickering/slumber#194))
- Use thicker borders for selected pane and modals
- Change default TUI colors to blue and yellow

Fixed
- Fix Slumber going into zombie mode and CPU spiking to 100% under certain closure scenarios ([#136](LucasPickering/slumber#136))
- Fix historical request/response no loading on first render ([#199](LucasPickering/slumber#199))
netbsd-srcmastr pushed a commit that referenced this issue May 6, 2024
uriparser: update to 0.9.8.
1a034e2 
2024-05-05 -- 0.9.8

>>>>>>>>>>>>> SECURITY >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
  * Fixed: [CVE-2024-34402]
      Protect against integer overflow in ComposeQueryEngine
      (GitHub #183, GitHub #185)
  * Fixed: [CVE-2024-34403]
      Protect against integer overflow in ComposeQueryMallocExMm
      (GitHub #183, GitHub #186)
>>>>>>>>>>>>> SECURITY >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
  * Changed: Require CMake >=3.5.0 (GitHub #172)
  * Added: CMake option URIPARSER_SHARED_LIBS=(ON|OFF) to control,
      whether to produce a shared or static library for uriparser
      and that alone, falls back to standard BUILD_SHARED_LIBS
      if available, else defaults to "ON" (GitHub #169, GitHub #170)
  * Improved: Document that scheme-based normalization a la
      section 6.2.3 of RFC 3986 is a responsibility of the application
      using uriparser (GitHub #173, GitHub #174)
  * Improved: Document supported code points for functions uriEscape(Ex)W
      (GitHub #171, GitHub #175)
  * Infrastructure: Update Clang from 15 to 18 (GitHub #161, GitHub #187)
  * Infrastructure: Adapt to breaking changes in Clang packaging (GitHub #160)
  * Infrastructure: Get sanitizer CFLAGS and LDFLAGS back in sync (GitHub #161)
  * Infrastructure: Pin GitHub Actions to specific commits for security
      (GitHub #165)
  * Soname: 1:31:0 — see https://verbump.de/ for what these numbers do

2022-10-05 -- 0.9.7

  * Fixed: Multiple issues with IPv6 and IPvFuture literal parsing
      (GitHub #146, GitHub #150)
      Thanks to Scallop Ye for the report and the pull request!
  * Fixed: Fix symbol visibility for -DBUILD_SHARED_LIBS=OFF (GitHub #139,
      GitHub #141); thanks to Mariusz Zaborski for the report!
  * Fixed: For MinGW, use size_t for inet_ntop declaration and fix macro
      checks for both MinGW and mingw-w64 (GitHub #131)
  * Fixed: Compiler warnings (GitHub #132, GitHub #152)
  * Improved: Use name UriConfig.h rather than generic config.h for the
      config header file to avoid name clashes and also include it through
      "UriConfig.h" with quotes rather than <UriConfig.h> so that it is found
      in quote path locations (GitHub #149)
      Thanks to Gaspard Petit for bringing this up!
  * Improved: Document need for UriConfig.h in UriMemory.c (GitHub #136)
  * Infrastructure: Add (support for) Visual Studio 17/2022 (GitHub #152)
  * Infrastructure: Drop (support for) Visual Studio <=14/2015 (GitHub #152)
  * Infrastructure: Update Clang from 13 to 15 (GitHub #143, GitHub #151)
  * Infrastructure: Make MinGW with 32bit Wine on Ubuntu 20.04 possible
      (GitHub #142, GitHub #144, GitHub #145)
  * Soname: 1:30:0 — see https://verbump.de/ for what these numbers do
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
1 participant
@VehementHam