Skip to content

Latest commit

 

History

History
300 lines (221 loc) · 11.4 KB

README.md

File metadata and controls

300 lines (221 loc) · 11.4 KB

PODMAN logo

Cirrus-CI

Similar to other integrated github CI/CD services, Cirrus utilizes a simple YAML-based configuration/description file: .cirrus.yml. Ref: https://cirrus-ci.org/

Workflow

All tasks execute in parallel, unless there are conditions or dependencies which alter this behavior. Within each task, each script executes in sequence, so long as any previous script exited successfully. The overall state of each task (pass or fail) is set based on the exit status of the last script to execute.

gating Task

N/B: Steps below are performed by automation

  1. Launch a purpose-built container in Cirrus's community cluster. For container image details, please see the contributors guide.

  2. validate: Perform standard make validate source verification, Should run for less than a minute or two.

  3. lint: Execute regular make lint to check for any code cruft. Should also run for less than a few minutes.

  4. vendor: runs make vendor-in-container followed by ./hack/tree_status.sh to check whether the git tree is clean. The reasoning for that is to make sure that the vendor.conf, the code and the vendored packages in ./vendor are in sync at all times.

meta Task

N/B: Steps below are performed by automation

  1. Launch a container built from definition in ./contrib/imgts.

  2. Update VM Image metadata to help track usage across all automation.

  3. Always exits successfully unless there's a major problem.

testing Task

N/B: Steps below are performed by automation

  1. After gating passes, spin up one VM per matrix: image_name item. Once accessible, ssh into each VM as the root user.

  2. setup_environment.sh: Configure root's .bash_profile for all subsequent scripts (each run in a new shell). Any distribution-specific environment variables are also defined here. For example, setting tags/flags to use compiling.

  3. integration_test.sh: Execute integration-testing. This is much more involved, and relies on access to external resources like container images and code from other repositories. Total execution time is capped at 2-hours (includes all the above) but this script normally completes in less than an hour.

special_testing_cross Task

Confirm that cross-compile of podman-remote functions for both windows and darwin targets.

special_testing_cgroupv2 Task

Use the latest Fedora release with the required kernel options pre-set for exercising cgroups v2 with Podman integration tests. Also depends on having SPECIALMODE set to 'cgroupv2`

test_build_cache_images_task Task

Modifying the contents of cache-images is tested by making changes to one or more of the ./contrib/cirrus/packer/*_setup.sh files. Then in the PR description, add the magic string: [CI:IMG]

N/B: Steps below are performed by automation

  1. setup_environment.sh: Same as for other tasks.

  2. build_vm_images.sh: Utilize the packer tool to produce new VM images. Create a new VM from each base-image, connect to them with ssh, and perform the steps as defined by the $PACKER_BASE/libpod_images.yml file:

    1. On a base-image VM, as root, copy the current state of the repository into /tmp/libpod.
    2. Execute distribution-specific scripts to prepare the image for use. For example, fedora_setup.sh.
    3. If successful, shut down each VM and record the names, and dates into a json manifest file.
    4. Move the manifest file, into a google storage bucket object. This is a retained as a secondary method for tracking/auditing creation of VM images, should it ever be needed.

verify_test_built_images Task

Only runs following successful test_build_cache_images_task task. Uses images following the standard naming format; however, only runs a limited sub-set of automated tests. Validating newly built images fully, requires updating .cirrus.yml.

N/B: Steps below are performed by automation

  1. Using the just build VM images, launch VMs and wait for them to boot.

  2. Execute the setup_environment.sh as in the testing task.

  3. Execute the integration_test.sh as in the testing task.

Manual Steps: Assuming the automated steps pass, then you'll find the new image names displayed at the end of the test_build_cache_images. For example:

...cut...

[+0747s] ==> Builds finished. The artifacts of successful builds are:
[+0747s] --> ubuntu-18: A disk image was created: ubuntu-18-libpod-5664838702858240
[+0747s] --> fedora-29: A disk image was created: fedora-29-libpod-5664838702858240
[+0747s] --> fedora-30: A disk image was created: fedora-30-libpod-5664838702858240
[+0747s] --> ubuntu-19: A disk image was created: ubuntu-19-libpod-5664838702858240

Notice the suffix on all the image names comes from the env. var. set in .cirrus.yml: BUILT_IMAGE_SUFFIX: "-${CIRRUS_REPO_NAME}-${CIRRUS_BUILD_ID}". Edit .cirrus.yml, in the top-level env section, update the suffix variable used at runtime to launch VMs for testing:

env:
    ...cut...
    ####
    #### Cache-image names to test with (double-quotes around names are critical)
    ###
    _BUILT_IMAGE_SUFFIX: "libpod-5664838702858240"
    FEDORA_CACHE_IMAGE_NAME: "fedora-30-${_BUILT_IMAGE_SUFFIX}"
    PRIOR_FEDORA_CACHE_IMAGE_NAME: "fedora-29-${_BUILT_IMAGE_SUFFIX}"
    ...cut...

NOTES:

  • If re-using the same PR with new images in .cirrus.yml, take care to also update the PR description to remove the magic [CI:IMG] string. Keeping it and --force pushing would needlessly cause Cirrus-CI to build and test images again.

  • In the future, if you need to review the log from the build that produced the referenced image:

    • Note the Build ID from the image name (for example 5664838702858240).
    • Go to that build in the Cirrus-CI WebUI, using the build ID in the URL. (For example https://cirrus-ci.com/build/5664838702858240.
    • Choose the test_build_cache_images task.
    • Open the build_vm_images script section.

docs Task

Builds swagger API documentation YAML and uploads to google storage for both PR's (for testing the process) and after a merge into any branch. For PR's the YAML is uploaded into a dedicated short-pruning cycle bucket. For branches, a separate bucket is used. In both cases the filename includes the source PR number or branch name.

Note: The online documentation is presented through javascript on the client-side. This requires CORS to be properly configured on the bucket, for the http://docs.podman.io origin. Please see Configuring CORS on a bucket for details. This may be performed by anybody with admin access to the google storage bucket, using the following JSON:

[
    {
      "origin": ["http://docs.podman.io"],
      "responseHeader": ["Content-Type"],
      "method": ["GET"],
      "maxAgeSeconds": 600
    }
]

Base-images

Base-images are VM disk-images specially prepared for executing as GCE VMs. In particular, they run services on startup similar in purpose/function as the standard 'cloud-init' services.

  • The google services are required for full support of ssh-key management and GCE OAuth capabilities. Google provides native images in GCE with services pre-installed, for many platforms. For example, RHEL, CentOS, and Ubuntu.

  • Google does not provide any images for Fedora (as of 5/2019), nor do they provide a base-image prepared to run packer for creating other images in the test_build_vm_images Task (above).

  • Base images do not need to be produced often, but doing so completely manually would be time-consuming and error-prone. Therefore a special semi-automatic Makefile target is provided to assist with producing all the base-images: libpod_base_images

To produce new base-images, including an image-builder-image (used by the cache_images Task) some input parameters are required:

  • GCP_PROJECT_ID: The complete GCP project ID string e.g. foobar-12345 identifying where the images will be stored.

  • GOOGLE_APPLICATION_CREDENTIALS: A JSON file containing credentials for a GCE service account. This can be a service account or end-user credentials

  • Optionally, CSV's may be specified to PACKER_BUILDS to limit the base-images produced. For example, PACKER_BUILDS=fedora,image-builder-image.

If there is no existing 'image-builder-image' within GCE, a new one may be bootstrapped by creating a CentOS 7 VM with support for nested-virtualization, and with elevated cloud privileges (to access GCE, from within the GCE VM). For example:

$ alias pgcloud='sudo podman run -it --rm -e AS_ID=$UID
    -e AS_USER=$USER -v $HOME:$HOME:z quay.io/cevich/gcloud_centos:latest'

$ URL=https://www.googleapis.com/auth
$ SCOPES=$URL/userinfo.email,$URL/compute,$URL/devstorage.full_control

# The --min-cpu-platform is critical for nested-virt.
$ pgcloud compute instances create $USER-image-builder \
    --image-family centos-7 \
    --boot-disk-size "200GB" \
    --min-cpu-platform "Intel Haswell" \
    --machine-type n1-standard-2 \
    --scopes $SCOPES

Then from that VM, execute the contrib/cirrus/packer/image-builder-image_base_setup.sh script. Shutdown the VM, and convert it into a new image-builder-image.

Building new base images is done by first creating a VM from an image-builder-image and copying the credentials json file to it.

$ hack/get_ci_vm.sh image-builder-image-1541772081
...in another terminal...
$ pgcloud compute scp /path/to/gac.json $USER-image-builder-image-1541772081:.

Then, on the VM, change to the packer sub-directory, and build the images:

$ cd libpod/contrib/cirrus/packer
$ make libpod_base_images GCP_PROJECT_ID=<VALUE> \
    GOOGLE_APPLICATION_CREDENTIALS=/path/to/gac.json \
    PACKER_BUILDS=<OPTIONAL>

Assuming this is successful (hence the semi-automatic part), packer will produce a packer-manifest.json output file. This contains the base-image names suitable for updating in .cirrus.yml, env keys *_BASE_IMAGE.

On failure, it should be possible to determine the problem from the packer output. Sometimes that means setting PACKER_LOG=1 and troubleshooting the nested virt calls. It's also possible to observe the (nested) qemu-kvm console output. Simply set the TTYDEV parameter, for example:

$ make libpod_base_images ... TTYDEV=$(tty)
  ...

$SPECIALMODE

Some tasks alter their behavior based on this value. A summary of supported values follows:

  • none: Operate as normal, this is the default value if unspecified.
  • rootless: Causes a random, ordinary user account to be created and utilized for testing.
  • in_podman: Causes testing to occur within a container executed by
  • windows: See darwin
  • darwin: Signals the special_testing_cross task to cross-compile the remote client.