single: Messenger

Messenger: Sync & Queued Message Handling

Messenger provides a message bus with the ability to send messages and then handle them immediately in your application or send them through transports (e.g. queues) to be handled later. To learn more deeply about it, read the Messenger component docs </components/messenger>.

Installation

In applications using Symfony Flex <symfony-flex>, run this command to install messenger:

$ composer require symfony/messenger

Creating a Message & Handler

Messenger centers around two different classes that you'll create: (1) a message class that holds data and (2) a handler(s) class that will be called when that message is dispatched. The handler class will read the message class and perform some task.

There are no specific requirements for a message class, except that it can be serialized:

// src/Message/SmsNotification.php
namespace App\Message;

class SmsNotification
{
    private $content;

    public function __construct(string $content)
    {
        $this->content = $content;
    }

    public function getContent(): string
    {
        return $this->content;
    }
}

A message handler is a PHP callable, the recommended way to create it is to create a class that implements Symfony\\Component\\Messenger\\Handler\\MessageHandlerInterface and has an __invoke() method that's type-hinted with the message class (or a message interface):

// src/MessageHandler/SmsNotificationHandler.php
namespace App\MessageHandler;

use App\Message\SmsNotification;
use Symfony\Component\Messenger\Handler\MessageHandlerInterface;

class SmsNotificationHandler implements MessageHandlerInterface
{
    public function __invoke(SmsNotification $message)
    {
        // ... do some work - like sending an SMS message!
    }
}

Thanks to autoconfiguration <services-autoconfigure> and the SmsNotification type-hint, Symfony knows that this handler should be called when an SmsNotification message is dispatched. Most of the time, this is all you need to do. But you can also manually configure message handlers <messenger-handler-config>. To see all the configured handlers, run:

$ php bin/console debug:messenger

Dispatching the Message

You're ready! To dispatch the message (and call the handler), inject the messenger.default_bus service (via the MessageBusInterface), like in a controller:

// src/Controller/DefaultController.php
namespace App\Controller;

use App\Message\SmsNotification;
use Symfony\Bundle\FrameworkBundle\Controller\AbstractController;
use Symfony\Component\Messenger\MessageBusInterface;

class DefaultController extends AbstractController
{
    public function index(MessageBusInterface $bus)
    {
        // will cause the SmsNotificationHandler to be called
        $bus->dispatch(new SmsNotification('Look! I created a message!'));

        // or use the shortcut
        $this->dispatchMessage(new SmsNotification('Look! I created a message!'));

        // ...
    }
}

Transports: Async/Queued Messages

By default, messages are handled as soon as they are dispatched. If you want to handle a message asynchronously, you can configure a transport. A transport is capable of sending messages (e.g. to a queueing system) and then receiving them via a worker <messenger-worker>. Messenger supports multiple transports <messenger-transports-config>.

Note

If you want to use a transport that's not supported, check out the Enqueue's transport, which supports things like Kafka and Google Pub/Sub.

A transport is registered using a "DSN". Thanks to Messenger's Flex recipe, your .env file already has a few examples.

# MESSENGER_TRANSPORT_DSN=amqp://guest:guest@localhost:5672/%2f/messages
# MESSENGER_TRANSPORT_DSN=doctrine://default
# MESSENGER_TRANSPORT_DSN=redis://localhost:6379/messages

Uncomment whichever transport you want (or set it in .env.local). See messenger-transports-config for more details.

Next, in config/packages/messenger.yaml, let's define a transport called async that uses this configuration:

# config/packages/messenger.yaml
framework:
    messenger:
        transports:
            async: "%env(MESSENGER_TRANSPORT_DSN)%"

            # or expanded to configure more options
            #async:
            #    dsn: "%env(MESSENGER_TRANSPORT_DSN)%"
            #    options: []

<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:framework="http://symfony.com/schema/dic/symfony"
    xsi:schemaLocation="http://symfony.com/schema/dic/services
        https://symfony.com/schema/dic/services/services-1.0.xsd
        http://symfony.com/schema/dic/symfony
        https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">

    <framework:config>
        <framework:messenger>
            <framework:transport name="async">%env(MESSENGER_TRANSPORT_DSN)%</framework:transport>

            <!-- or expanded to configure more options -->
            <framework:transport name="async"
                dsn="%env(MESSENGER_TRANSPORT_DSN)%"
            >
                <option key="...">...</option>
            </framework:transport>
        </framework:messenger>
    </framework:config>
</container>

// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;

return static function (FrameworkConfig $framework) {
    $framework->messenger()
        ->transport('async')
            ->dsn('%env(MESSENGER_TRANSPORT_DSN)%')
    ;

    $framework->messenger()
        ->transport('async')
            ->dsn('%env(MESSENGER_TRANSPORT_DSN)%')
            ->options([])
    ;
};

Routing Messages to a Transport

Now that you have a transport configured, instead of handling a message immediately, you can configure them to be sent to a transport:

# config/packages/messenger.yaml
framework:
    messenger:
        transports:
            async: "%env(MESSENGER_TRANSPORT_DSN)%"

        routing:
            # async is whatever name you gave your transport above
            'App\Message\SmsNotification': async

<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:framework="http://symfony.com/schema/dic/symfony"
    xsi:schemaLocation="http://symfony.com/schema/dic/services
        https://symfony.com/schema/dic/services/services-1.0.xsd
        http://symfony.com/schema/dic/symfony
        https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">

    <framework:config>
        <framework:messenger>
            <framework:routing message-class="App\Message\SmsNotification">
                <!-- async is whatever name you gave your transport above -->
                <framework:sender service="async"/>
            </framework:routing>
        </framework:messenger>
    </framework:config>
</container>

// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;

return static function (FrameworkConfig $framework) {
    $framework->messenger()
        // async is whatever name you gave your transport above
        ->routing('App\Message\SmsNotification')->senders(['async'])
    ;
};

Thanks to this, the App\Message\SmsNotification will be sent to the async transport and its handler(s) will not be called immediately. Any messages not matched under routing will still be handled immediately.

You can also route classes by their parent class or interface. Or send messages to multiple transports:

# config/packages/messenger.yaml
framework:
    messenger:
        routing:
            # route all messages that extend this example base class or interface
            'App\Message\AbstractAsyncMessage': async
            'App\Message\AsyncMessageInterface': async

            'My\Message\ToBeSentToTwoSenders': [async, audit]

<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:framework="http://symfony.com/schema/dic/symfony"
    xsi:schemaLocation="http://symfony.com/schema/dic/services
        https://symfony.com/schema/dic/services/services-1.0.xsd
        http://symfony.com/schema/dic/symfony
        https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">

    <framework:config>
        <framework:messenger>
            <!-- route all messages that extend this example base class or interface -->
            <framework:routing message-class="App\Message\AbstractAsyncMessage">
                <framework:sender service="async"/>
            </framework:routing>
            <framework:routing message-class="App\Message\AsyncMessageInterface">
                <framework:sender service="async"/>
            </framework:routing>
            <framework:routing message-class="My\Message\ToBeSentToTwoSenders">
                <framework:sender service="async"/>
                <framework:sender service="audit"/>
            </framework:routing>
        </framework:messenger>
    </framework:config>
</container>

// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;

return static function (FrameworkConfig $framework) {
    $messenger = $framework->messenger();
    // route all messages that extend this example base class or interface
    $messenger->routing('App\Message\AbstractAsyncMessage')->senders(['async']);
    $messenger->routing('App\Message\AsyncMessageInterface')->senders(['async']);
    $messenger->routing('My\Message\ToBeSentToTwoSenders')->senders(['async', 'audit']);
};

Note

If you configure routing for both a child and parent class, both rules are used. E.g. if you have an SmsNotification object that extends from Notification, both the routing for Notification and SmsNotification will be used.

Doctrine Entities in Messages

If you need to pass a Doctrine entity in a message, it's better to pass the entity's primary key (or whatever relevant information the handler actually needs, like email, etc) instead of the object:

// src/Message/NewUserWelcomeEmail.php
namespace App\Message;

class NewUserWelcomeEmail
{
    private $userId;

    public function __construct(int $userId)
    {
        $this->userId = $userId;
    }

    public function getUserId(): int
    {
        return $this->userId;
    }
}

Then, in your handler, you can query for a fresh object:

// src/MessageHandler/NewUserWelcomeEmailHandler.php
namespace App\MessageHandler;

use App\Message\NewUserWelcomeEmail;
use App\Repository\UserRepository;
use Symfony\Component\Messenger\Handler\MessageHandlerInterface;

class NewUserWelcomeEmailHandler implements MessageHandlerInterface
{
    private $userRepository;

    public function __construct(UserRepository $userRepository)
    {
        $this->userRepository = $userRepository;
    }

    public function __invoke(NewUserWelcomeEmail $welcomeEmail)
    {
        $user = $this->userRepository->find($welcomeEmail->getUserId());

        // ... send an email!
    }
}

This guarantees the entity contains fresh data.

Handling Messages Synchronously

If a message doesn't match any routing rules <messenger-routing>, it won't be sent to any transport and will be handled immediately. In some cases (like when binding handlers to different transports), it's easier or more flexible to handle this explicitly: by creating a sync transport and "sending" messages there to be handled immediately:

# config/packages/messenger.yaml
framework:
    messenger:
        transports:
            # ... other transports

            sync: 'sync://'

        routing:
            App\Message\SmsNotification: sync

<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:framework="http://symfony.com/schema/dic/symfony"
    xsi:schemaLocation="http://symfony.com/schema/dic/services
        https://symfony.com/schema/dic/services/services-1.0.xsd
        http://symfony.com/schema/dic/symfony
        https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">

    <framework:config>
        <framework:messenger>
            <!-- ... other transports -->

            <framework:transport name="sync" dsn="sync://"/>

            <framework:routing message-class="App\Message\SmsNotification">
                <framework:sender service="sync"/>
            </framework:routing>
        </framework:messenger>
    </framework:config>
</container>

// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;

return static function (FrameworkConfig $framework) {
    $messenger = $framework->messenger();

    // ... other transports

    $messenger->transport('sync')->dsn('sync://');
    $messenger->routing('App\Message\SmsNotification')->senders(['sync']);
};

Creating your Own Transport

You can also create your own transport if you need to send or receive messages from something that is not supported. See /messenger/custom-transport.

Consuming Messages (Running the Worker)

Once your messages have been routed, in most cases, you'll need to "consume" them. You can do this with the messenger:consume command:

$ php bin/console messenger:consume async

# use -vv to see details about what's happening
$ php bin/console messenger:consume async -vv

The first argument is the receiver's name (or service id if you routed to a custom service). By default, the command will run forever: looking for new messages on your transport and handling them. This command is called your "worker".

Deploying to Production

On production, there are a few important things to think about:

Use Supervisor to keep your worker(s) running: You'll want one or more "workers" running at all times. To do that, use a process control system like Supervisor <messenger-supervisor>.
Don't Let Workers Run Forever: Some services (like Doctrine's EntityManager) will consume more memory over time. So, instead of allowing your worker to run forever, use a flag like messenger:consume --limit=10 to tell your worker to only handle 10 messages before exiting (then Supervisor will create a new process). There are also other options like --memory-limit=128M and --time-limit=3600.
Restart Workers on Deploy: Each time you deploy, you'll need to restart all your worker processes so that they see the newly deployed code. To do this, run messenger:stop-workers on deploy. This will signal to each worker that it should finish the message it's currently handling and shut down gracefully. Then, Supervisor will create new worker processes. The command uses the app <cache-configuration-with-frameworkbundle> cache internally - so make sure this is configured to use an adapter you like.
Use the Same Cache Between Deploys: If your deploy strategy involves the creation of new target directories, you should set a value for the cache.prefix.seed <reference-cache-prefix-seed> configuration option in order to use the same cache namespace between deployments. Otherwise, the cache.app pool will use the value of the kernel.project_dir parameter as base for the namespace, which will lead to different namespaces each time a new deployment is made.

Prioritized Transports

Sometimes certain types of messages should have a higher priority and be handled before others. To make this possible, you can create multiple transports and route different messages to them. For example:

# config/packages/messenger.yaml
framework:
    messenger:
        transports:
            async_priority_high:
                dsn: '%env(MESSENGER_TRANSPORT_DSN)%'
                options:
                    # queue_name is specific to the doctrine transport
                    queue_name: high

                    # for AMQP send to a separate exchange then queue
                    #exchange:
                    #    name: high
                    #queues:
                    #    messages_high: ~
                    # or redis try "group"
            async_priority_low:
                dsn: '%env(MESSENGER_TRANSPORT_DSN)%'
                options:
                    queue_name: low

        routing:
            'App\Message\SmsNotification':  async_priority_low
            'App\Message\NewUserWelcomeEmail':  async_priority_high

<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:framework="http://symfony.com/schema/dic/symfony"
    xsi:schemaLocation="http://symfony.com/schema/dic/services
        https://symfony.com/schema/dic/services/services-1.0.xsd
        http://symfony.com/schema/dic/symfony
        https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">

    <framework:config>
        <framework:messenger>
            <framework:transport name="async_priority_high" dsn="%env(MESSENGER_TRANSPORT_DSN)%">
                <framework:options>
                    <framework:queue>
                        <framework:name>Queue</framework:name>
                    </framework:queue>
                </framework:options>
            </framework:transport>
            <framework:transport name="async_priority_low" dsn="%env(MESSENGER_TRANSPORT_DSN)%">
                <option key="queue_name">low</option>
            </framework:transport>

            <framework:routing message-class="App\Message\SmsNotification">
                <framework:sender service="async_priority_low"/>
            </framework:routing>
            <framework:routing message-class="App\Message\NewUserWelcomeEmail">
                <framework:sender service="async_priority_high"/>
            </framework:routing>
        </framework:messenger>
    </framework:config>
</container>

// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;

return static function (FrameworkConfig $framework) {
    $messenger = $framework->messenger();

    $messenger->transport('async_priority_high')
        ->dsn('%env(MESSENGER_TRANSPORT_DSN)%')
        ->options(['queue_name' => 'high']);

    $messenger->transport('async_priority_low')
        ->dsn('%env(MESSENGER_TRANSPORT_DSN)%')
        ->options(['queue_name' => 'low']);

    $messenger->routing('App\Message\SmsNotification')->senders(['async_priority_low']);
    $messenger->routing('App\Message\NewUserWelcomeEmail')->senders(['async_priority_high']);
};

You can then run individual workers for each transport or instruct one worker to handle messages in a priority order:

$ php bin/console messenger:consume async_priority_high async_priority_low

The worker will always first look for messages waiting on async_priority_high. If there are none, then it will consume messages from async_priority_low.

Limit Consuming to Specific Queues

Some transports (notably AMQP) have the concept of exchanges and queues. A Symfony transport is always bound to an exchange. By default, the worker consumes from all queues attached to the exchange of the specified transport. However, there are use cases to want a worker to only consume from specific queues.

You can limit the worker to only process messages from specific queues:

$ php bin/console messenger:consume my_transport --queues=fasttrack

To allow using the queues option, the receiver must implement the Symfony\\Component\\Messenger\\Transport\\Receiver\\QueueReceiverInterface.

5.3

Limiting the worker to specific queues was introduced in Symfony 5.3.

Supervisor Configuration

Supervisor is a great tool to guarantee that your worker process(es) is always running (even if it closes due to failure, hitting a message limit or thanks to messenger:stop-workers). You can install it on Ubuntu, for example, via:

$ sudo apt-get install supervisor

Supervisor configuration files typically live in a /etc/supervisor/conf.d directory. For example, you can create a new messenger-worker.conf file there to make sure that 2 instances of messenger:consume are running at all times:

;/etc/supervisor/conf.d/messenger-worker.conf
[program:messenger-consume]
command=php /path/to/your/app/bin/console messenger:consume async --time-limit=3600
user=ubuntu
numprocs=2
startsecs=0
autostart=true
autorestart=true
process_name=%(program_name)s_%(process_num)02d

Change the async argument to use the name of your transport (or transports) and user to the Unix user on your server.

If you use the Redis Transport, note that each worker needs a unique consumer name to avoid the same message being handled by multiple workers. One way to achieve this is to set an environment variable in the Supervisor configuration file, which you can then refer to in messenger.yaml (see Redis section above):

environment=MESSENGER_CONSUMER_NAME=%(program_name)s_%(process_num)02d

Next, tell Supervisor to read your config and start your workers:

$ sudo supervisorctl reread

$ sudo supervisorctl update

$ sudo supervisorctl start messenger-consume:*

See the Supervisor docs for more details.

Retries & Failures

If an exception is thrown while consuming a message from a transport it will automatically be re-sent to the transport to be tried again. By default, a message will be retried 3 times before being discarded or sent to the failure transport <messenger-failure-transport>. Each retry will also be delayed, in case the failure was due to a temporary issue. All of this is configurable for each transport:

# config/packages/messenger.yaml
framework:
    messenger:
        transports:
            async_priority_high:
                dsn: '%env(MESSENGER_TRANSPORT_DSN)%'

                # default configuration
                retry_strategy:
                    max_retries: 3
                    # milliseconds delay
                    delay: 1000
                    # causes the delay to be higher before each retry
                    # e.g. 1 second delay, 2 seconds, 4 seconds
                    multiplier: 2
                    max_delay: 0
                    # override all of this with a service that
                    # implements Symfony\Component\Messenger\Retry\RetryStrategyInterface
                    # service: null

<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:framework="http://symfony.com/schema/dic/symfony"
    xsi:schemaLocation="http://symfony.com/schema/dic/services
        https://symfony.com/schema/dic/services/services-1.0.xsd
        http://symfony.com/schema/dic/symfony
        https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">

    <framework:config>
        <framework:messenger>
            <framework:transport name="async_priority_high" dsn="%env(MESSENGER_TRANSPORT_DSN)%?queue_name=high_priority">
                <framework:retry-strategy max-retries="3" delay="1000" multiplier="2" max-delay="0"/>
            </framework:transport>
        </framework:messenger>
    </framework:config>
</container>

// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;

return static function (FrameworkConfig $framework) {
    $messenger = $framework->messenger();

    $messenger->transport('async_priority_high')
        ->dsn('%env(MESSENGER_TRANSPORT_DSN)%')
        // default configuration
        ->retryStrategy()
            ->maxRetries(3)
            // milliseconds delay
            ->delay(1000)
            // causes the delay to be higher before each retry
            // e.g. 1 second delay, 2 seconds, 4 seconds
            ->multiplier(2)
            ->maxDelay(0)
            // override all of this with a service that
            // implements Symfony\Component\Messenger\Retry\RetryStrategyInterface
            ->service(null)
    ;
};

Tip

Symfony triggers a Symfony\\Component\\Messenger\\Event\\WorkerMessageRetriedEvent when a message is retried so you can run your own logic.

5.2

The WorkerMessageRetriedEvent class was introduced in Symfony 5.2.

Avoiding Retrying

Sometimes handling a message might fail in a way that you know is permanent and should not be retried. If you throw Symfony\\Component\\Messenger\\Exception\\UnrecoverableMessageHandlingException, the message will not be retried.

Forcing Retrying

5.1

The RecoverableMessageHandlingException was introduced in Symfony 5.1.

Sometimes handling a message must fail in a way that you know is temporary and must be retried. If you throw Symfony\\Component\\Messenger\\Exception\\RecoverableMessageHandlingException, the message will always be retried.

Saving & Retrying Failed Messages

If a message fails it is retried multiple times (max_retries) and then will be discarded. To avoid this happening, you can instead configure a failure_transport:

# config/packages/messenger.yaml
framework:
    messenger:
        # after retrying, messages will be sent to the "failed" transport
        failure_transport: failed

        transports:
            # ... other transports

            failed: 'doctrine://default?queue_name=failed'

<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:framework="http://symfony.com/schema/dic/symfony"
    xsi:schemaLocation="http://symfony.com/schema/dic/services
        https://symfony.com/schema/dic/services/services-1.0.xsd
        http://symfony.com/schema/dic/symfony
        https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">

    <framework:config>
        <!-- after retrying, messages will be sent to the "failed" transport -->
        <framework:messenger failure-transport="failed">
            <!-- ... other transports -->

            <framework:transport name="failed" dsn="doctrine://default?queue_name=failed"/>
        </framework:messenger>
    </framework:config>
</container>

// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;

return static function (FrameworkConfig $framework) {
    $messenger = $framework->messenger();

    // after retrying, messages will be sent to the "failed" transport
    $messenger->failureTransport('failed');

    // ... other transports

    $messenger->transport('failed')
        ->dsn('doctrine://default?queue_name=failed');
};

In this example, if handling a message fails 3 times (default max_retries), it will then be sent to the failed transport. While you can use messenger:consume failed to consume this like a normal transport, you'll usually want to manually view the messages in the failure transport and choose to retry them:

# see all messages in the failure transport
$ php bin/console messenger:failed:show

# see details about a specific failure
$ php bin/console messenger:failed:show 20 -vv

# view and retry messages one-by-one
$ php bin/console messenger:failed:retry -vv

# retry specific messages
$ php bin/console messenger:failed:retry 20 30 --force

# remove a message without retrying it
$ php bin/console messenger:failed:remove 20

# remove messages without retrying them and show each message before removing it
$ php bin/console messenger:failed:remove 20 30 --show-messages

5.1

The --show-messages option was introduced in Symfony 5.1.

If the message fails again, it will be re-sent back to the failure transport due to the normal retry rules <messenger-retries-failures>. Once the max retry has been hit, the message will be discarded permanently.

Multiple Failed Transports

5.3

The possibility to use multiple failed transports was introduced in Symfony 5.3.

Sometimes it is not enough to have a single, global failed transport configured because some messages are more important than others. In those cases, you can override the failure transport for only specific transports:

# config/packages/messenger.yaml
framework:
    messenger:
        # after retrying, messages will be sent to the "failed" transport
        # by default if no "failed_transport" is configured inside a transport
        failure_transport: failed_default

        transports:
            async_priority_high:
                dsn: '%env(MESSENGER_TRANSPORT_DSN)%'
                failure_transport: failed_high_priority

            # since no failed transport is configured, the one used will be
            # the global "failure_transport" set
            async_priority_low:
                dsn: 'doctrine://default?queue_name=async_priority_low'

            failed_default: 'doctrine://default?queue_name=failed_default'
            failed_high_priority: 'doctrine://default?queue_name=failed_high_priority'

<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:framework="http://symfony.com/schema/dic/symfony"
    xsi:schemaLocation="http://symfony.com/schema/dic/services
        https://symfony.com/schema/dic/services/services-1.0.xsd
        http://symfony.com/schema/dic/symfony
        https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">

    <framework:config>
        <!-- after retrying, messages will be sent to the "failed" transport
        by default if no "failed-transport" is configured inside a transport -->
        <framework:messenger failure-transport="failed_default">
            <framework:transport name="async_priority_high" dsn="%env(MESSENGER_TRANSPORT_DSN)%" failure-transport="failed_high_priority"/>
            <!-- since no "failed_transport" is configured, the one used will be
            the global "failed_transport" set -->
            <framework:transport name="async_priority_low" dsn="doctrine://default?queue_name=async_priority_low"/>

            <framework:transport name="failed_default" dsn="doctrine://default?queue_name=failed_default"/>
            <framework:transport name="failed_high_priority" dsn="doctrine://default?queue_name=failed_high_priority"/>
        </framework:messenger>
    </framework:config>
</container>

// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;

return static function (FrameworkConfig $framework) {
    $messenger = $framework->messenger();

    // after retrying, messages will be sent to the "failed" transport
    // by default if no "failure_transport" is configured inside a transport
    $messenger->failureTransport('failed_default');

    $messenger->transport('async_priority_high')
        ->dsn('%env(MESSENGER_TRANSPORT_DSN)%')
        ->failureTransport('failed_high_priority');

    // since no failed transport is configured, the one used will be
    // the global failure_transport set
   $messenger->transport('async_priority_low')
        ->dsn('doctrine://default?queue_name=async_priority_low');

   $messenger->transport('failed_default')
        ->dsn('doctrine://default?queue_name=failed_default');

   $messenger->transport('failed_high_priority')
        ->dsn('doctrine://default?queue_name=failed_high_priority');
};

If there is no failure_transport defined globally or on the transport level, the messages will be discarded after the number of retries.

The failed commands have an optional option --transport to specify the failure_transport configured at the transport level.

# see all messages in "failure_transport" transport
$ php bin/console messenger:failed:show --transport=failure_transport

# retry specific messages from "failure_transport"
$ php bin/console messenger:failed:retry 20 30 --transport=failure_transport --force

# remove a message without retrying it from "failure_transport"
$ php bin/console messenger:failed:remove 20 --transport=failure_transport

Transport Configuration

Messenger supports a number of different transport types, each with their own options. Options can be passed to the transport via a DSN string or configuration.

# .env
MESSENGER_TRANSPORT_DSN=amqp://localhost/%2f/messages?auto_setup=false

# config/packages/messenger.yaml
framework:
    messenger:
        transports:
            my_transport:
                dsn: "%env(MESSENGER_TRANSPORT_DSN)%"
                options:
                    auto_setup: false

<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:framework="http://symfony.com/schema/dic/symfony"
    xsi:schemaLocation="http://symfony.com/schema/dic/services
        https://symfony.com/schema/dic/services/services-1.0.xsd
        http://symfony.com/schema/dic/symfony
        https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">

    <framework:config>
        <framework:messenger>
            <framework:transport name="my_transport" dsn="%env(MESSENGER_TRANSPORT_DSN)%">
                <framework:options auto-setup="false"/>
            </framework:transport>
        </framework:messenger>
    </framework:config>
</container>

// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;

return static function (FrameworkConfig $framework) {
    $messenger = $framework->messenger();

    $messenger->transport('my_transport')
        ->dsn('%env(MESSENGER_TRANSPORT_DSN)%')
        ->options(['auto_setup' => false]);
};

Options defined under options take precedence over ones defined in the DSN.

AMQP Transport

The AMQP transport uses the AMQP PHP extension to send messages to queues like RabbitMQ.

5.1

Starting from Symfony 5.1, the AMQP transport has moved to a separate package. Install it by running:

$ composer require symfony/amqp-messenger

The AMQP transport DSN may looks like this:

# .env
MESSENGER_TRANSPORT_DSN=amqp://guest:guest@localhost:5672/%2f/messages

# or use the AMQPS protocol
MESSENGER_TRANSPORT_DSN=amqps://guest:guest@localhost/%2f/messages

5.2

The AMQPS protocol support was introduced in Symfony 5.2.

If you want to use TLS/SSL encrypted AMQP, you must also provide a CA certificate. Define the certificate path in the amqp.cacert PHP.ini setting (e.g. amqp.cacert = /etc/ssl/certs) or in the cacert parameter of the DSN (e.g amqps://localhost?cacert=/etc/ssl/certs/).

The default port used by TLS/SSL encrypted AMQP is 5671, but you can overwrite it in the port parameter of the DSN (e.g. amqps://localhost?cacert=/etc/ssl/certs/&port=12345).

Note

By default, the transport will automatically create any exchanges, queues and binding keys that are needed. That can be disabled, but some functionality may not work correctly (like delayed queues).

Note

With Symfony 5.3 or newer, you can limit the consumer of an AMQP transport to only process messages from some queues of an exchange. See messenger-limit-queues.

The transport has a number of other options, including ways to configure the exchange, queues binding keys and more. See the documentation on Symfony\\Component\\Messenger\\Bridge\\Amqp\\Transport\\Connection.

The transport has a number of options:

Option	Description	Default
`auto_setup` `cacert` `cert` `channel_max` `confirm_timeout` `connect_timeout` `frame_max` `heartbeat` `host` `key` `password` `persistent` `port` `prefetch_count` `read_timeout` `retry` `sasl_method` `user` `verify` `vhost` `write_timeout`	Whether the table should be created automatically during send / get. Path to the CA cert file in PEM format. Path to the client certificate in PEM format. Specifies highest channel number that the server permits. 0 means standard extension limit Timeout in seconds for confirmation; if none specified, transport will not wait for message confirmation. Note: 0 or greater seconds. May be fractional. Connection timeout. Note: 0 or greater seconds. May be fractional. The largest frame size that the server proposes for the connection, including frame header and end-byte. 0 means standard extension limit (depends on librabbimq default frame size limit) The delay, in seconds, of the connection heartbeat that the server wants. 0 means the server does not want a heartbeat. Note, librabbitmq has limited heartbeat support, which means heartbeats checked only during blocking calls. Hostname of the AMQP service Path to the client key in PEM format. Password to use to connect to the AMQP service Port of the AMQP service Timeout in for income activity. Note: 0 or greater seconds. May be fractional. Username to use to connect the AMQP service Enable or disable peer verification. If peer verification is enabled then the common name in the server certificate must match the server name. Peer verification is enabled by default. Virtual Host to use with the AMQP service Timeout in for outcome activity. Note: 0 or greater seconds. May be fractional.	`true` `'false'`
`delay[queue_name_pattern]`	Pattern to use to create the queues	`delay_%exchange_name%_%routing_key%_%delay%`
`delay[exchange_name]` `queues[name][arguments]` `queues[name][binding_arguments]` `queues[name][binding_keys]`	Name of the exchange to be used for the delayed/retried messages Extra arguments Arguments to be used while binding the queue. The binding keys (if any) to bind to this queue	`delays`
`queues[name][flags]` `exchange[arguments]` `exchange[default_publish_routing_key]`	Queue flags Extra arguments for the exchange (e.g. `alternate-exchange`) Routing key to use when publishing, if none is specified on the message	`AMQP_DURABLE`
`exchange[flags]` `exchange[name]`	Exchange flags Name of the exchange	`AMQP_DURABLE`
`exchange[type]`	Type of exchange	`fanout`

5.2

The confirm_timeout option was introduced in Symfony 5.2.

5.3

The prefetch_count option was deprecated in Symfony 5.3 because it has no effect on the AMQP Messenger transport.

You can also configure AMQP-specific settings on your message by adding Symfony\\Component\\Messenger\\Bridge\\Amqp\\Transport\\AmqpStamp to your Envelope:

use Symfony\Component\Messenger\Bridge\Amqp\Transport\AmqpStamp;
// ...

$attributes = [];
$bus->dispatch(new SmsNotification(), [
    new AmqpStamp('custom-routing-key', AMQP_NOPARAM, $attributes),
]);

Caution

The consumers do not show up in an admin panel as this transport does not rely on \AmqpQueue::consume() which is blocking. Having a blocking receiver makes the --time-limit/--memory-limit options of the messenger:consume command as well as the messenger:stop-workers command inefficient, as they all rely on the fact that the receiver returns immediately no matter if it finds a message or not. The consume worker is responsible for iterating until it receives a message to handle and/or until one of the stop conditions is reached. Thus, the worker's stop logic cannot be reached if it is stuck in a blocking call.

Doctrine Transport

The Doctrine transport can be used to store messages in a database table.

5.1

Starting from Symfony 5.1, the Doctrine transport has moved to a separate package. Install it by running:

$ composer require symfony/doctrine-messenger

The Doctrine transport DSN may looks like this:

# .env
MESSENGER_TRANSPORT_DSN=doctrine://default

The format is doctrine://<connection_name>, in case you have multiple connections and want to use one other than the "default". The transport will automatically create a table named messenger_messages.

5.1

The ability to automatically generate a migration for the messenger_messages table was introduced in Symfony 5.1 and DoctrineBundle 2.1.

Or, to create the table yourself, set the auto_setup option to false and generate a migration <doctrine-creating-the-database-tables-schema>.

Caution

The datetime property of the messages stored in the database uses the timezone of the current system. This may cause issues if multiple machines with different timezone configuration use the same storage.

The transport has a number of options:

Option

Description

Default

table_name

Name of the table

messenger_messages

queue_name

Name of the queue (a column in the table, to use one table for multiple transports)

default

redeliver_timeout

auto_setup

Timeout before retrying a message that's in the queue but in the "handling" state (if a worker stopped for some reason, this will occur, eventually you should retry the message) - in seconds. Whether the table should be created automatically during send / get.

3600

true

5.1

The ability to leverage PostgreSQL's LISTEN/NOTIFY was introduced in Symfony 5.1.

When using PostgreSQL, you have access to the following options to leverage the LISTEN/NOTIFY feature. This allow for a more performant approach than the default polling behavior of the Doctrine transport because PostgreSQL will directly notify the workers when a new message is inserted in the table.

Option	Description	Default
use_notify	Whether to use LISTEN/NOTIFY.	true
check_delayed_interval	The interval to check for delayed messages, in milliseconds. Set to 0 to disable checks.	1000
get_notify_timeout	The length of time to wait for a response when calling `PDO::pgsqlGetNotify``, in milliseconds.	0

Beanstalkd Transport

5.2

The Beanstalkd transport was introduced in Symfony 5.2.

The Beanstalkd transport sends messages directly to a Beanstalkd work queue. Install it by running:

$ composer require symfony/beanstalkd-messenger

The Beanstalkd transport DSN may looks like this:

# .env
MESSENGER_TRANSPORT_DSN=beanstalkd://localhost:11300?tube_name=foo&timeout=4&ttr=120

# If no port, it will default to 11300
MESSENGER_TRANSPORT_DSN=beanstalkd://localhost

The transport has a number of options:

Option

Description

Default

tube_name

Name of the queue

default

timeout

ttr

Message reservation timeout - in seconds.

The message time to run before it is put back in the ready queue - in seconds.

0 (will cause the server to immediately return either a response or a TransportException will be thrown)

90

Redis Transport

The Redis transport uses streams to queue messages. This transport requires the Redis PHP extension (>=4.3) and a running Redis server (^5.0).

5.1

Starting from Symfony 5.1, the Redis transport has moved to a separate package. Install it by running:

$ composer require symfony/redis-messenger

The Redis transport DSN may looks like this:

# .env
MESSENGER_TRANSPORT_DSN=redis://localhost:6379/messages
# Full DSN Example
MESSENGER_TRANSPORT_DSN=redis://password@localhost:6379/messages/symfony/consumer?auto_setup=true&serializer=1&stream_max_entries=0&dbindex=0
# Redis Cluster Example
MESSENGER_TRANSPORT_DSN=redis://host-01:6379,redis://host-02:6379,redis://host-03:6379,redis://host-04:6379
# Unix Socket Example
MESSENGER_TRANSPORT_DSN=redis:///var/run/redis.sock

5.1

The Unix socket DSN was introduced in Symfony 5.1.

A number of options can be configured via the DSN or via the options key under the transport in messenger.yaml:

Option	Description	Default
stream	The Redis stream name	messages
group	The Redis consumer group name	symfony
consumer	Consumer name used in Redis	consumer
auto_setup auth	Create the Redis group automatically? The Redis password	true
delete_after_ack	If `true`, messages are deleted automatically after processing them	false
delete_after_reject	If `true`, messages are deleted automatically if they are rejected	true
lazy	Connect only when a connection is really needed	false
serializer	How to serialize the final payload in Redis (the `Redis::OPT_SERIALIZER` option)	`Redis::SERIALIZER_PHP`
stream_max_entries	The maximum number of entries which the stream will be trimmed to. Set it to a large enough number to avoid losing pending messages	`0` (which means "no trimming")
tls	Enable TLS support for the connection	false
redeliver_timeout	Timeout before retrying a pending message which is owned by an abandoned consumer (if a worker died for some reason, this will occur, eventually you should retry the message) - in seconds.	`3600`
claim_interval	Interval on which pending/abandoned messages should be checked for to claim - in milliseconds	`60000` (1 Minute)

Caution

There should never be more than one messenger:consume command running with the same combination of stream, group and consumer, or messages could end up being handled more than once. If you run multiple queue workers, consumer can be set to an environment variable (like %env(MESSENGER_CONSUMER_NAME)%) set by Supervisor (example below) or any other service used to manage the worker processes. In a container environment, the HOSTNAME can be used as the consumer name, since there is only one worker per container/host. If using Kubernetes to orchestrate the containers, consider using a StatefulSet to have stable names.

Tip

Set delete_after_ack to true (if you use a single group) or define stream_max_entries (if you can estimate how many max entries is acceptable in your case) to avoid memory leaks. Otherwise, all messages will remain forever in Redis.

5.1

The delete_after_ack, redeliver_timeout and claim_interval options were introduced in Symfony 5.1.

5.2

The delete_after_reject and lazy options were introduced in Symfony 5.2.

In Memory Transport

The in-memory transport does not actually deliver messages. Instead, it holds them in memory during the request, which can be useful for testing. For example, if you have an async_priority_normal transport, you could override it in the test environment to use this transport:

# config/packages/test/messenger.yaml
framework:
    messenger:
        transports:
            async_priority_normal: 'in-memory://'

<!-- config/packages/test/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:framework="http://symfony.com/schema/dic/symfony"
    xsi:schemaLocation="http://symfony.com/schema/dic/services
        https://symfony.com/schema/dic/services/services-1.0.xsd
        http://symfony.com/schema/dic/symfony
        https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">

    <framework:config>
        <framework:messenger>
            <framework:transport name="async_priority_normal" dsn="in-memory://"/>
        </framework:messenger>
    </framework:config>
</container>

// config/packages/test/messenger.php
use Symfony\Config\FrameworkConfig;

return static function (FrameworkConfig $framework) {
    $messenger = $framework->messenger();

    $messenger->transport('async_priority_normal')
        ->dsn('in-memory://');
};

Then, while testing, messages will not be delivered to the real transport. Even better, in a test, you can check that exactly one message was sent during a request:

// tests/Controller/DefaultControllerTest.php
namespace App\Tests\Controller;

use Symfony\Bundle\FrameworkBundle\Test\WebTestCase;
use Symfony\Component\Messenger\Transport\InMemoryTransport;

class DefaultControllerTest extends WebTestCase
{
    public function testSomething()
    {
        $client = static::createClient();
        // ...

        $this->assertSame(200, $client->getResponse()->getStatusCode());

        /* @var InMemoryTransport $transport */
        $transport = self::$container->get('messenger.transport.async_priority_normal');
        $this->assertCount(1, $transport->getSent());
    }
}

The transport has a number of options:

serialize (boolean, default: false): Whether to serialize messages or not. This is useful to test an additional layer, especially when you use your own message serializer.

5.3

The serialize option was introduced in Symfony 5.3.

Note

All in-memory transports will be reset automatically after each test in test classes extending Symfony\\Bundle\\FrameworkBundle\\Test\\KernelTestCase or Symfony\\Bundle\\FrameworkBundle\\Test\\WebTestCase.

Amazon SQS

5.1

The Amazon SQS transport was introduced in Symfony 5.1.

The Amazon SQS transport is perfect for application hosted on AWS. Install it by running:

$ composer require symfony/amazon-sqs-messenger

The SQS transport DSN may looks like this:

# .env
MESSENGER_TRANSPORT_DSN=https://sqs.eu-west-3.amazonaws.com/123456789012/messages?access_key=AKIAIOSFODNN7EXAMPLE&secret_key=j17M97ffSVoKI0briFoo9a
MESSENGER_TRANSPORT_DSN=sqs://localhost:9494/messages?sslmode=disable

Note

The transport will automatically create queues that are needed. This can be disabled setting the auto_setup option to false.

Tip

Before sending or receiving a message, Symfony needs to convert the queue name into an AWS queue URL by calling the GetQueueUrl API in AWS. This extra API call can be avoided by providing a DSN which is the queue URL.

5.2

The feature to provide the queue URL in the DSN was introduced in Symfony 5.2.

The transport has a number of options:

Option	Description	Default
`access_key`	AWS access key
`account`	Identifier of the AWS account	The owner of the credentials
`auto_setup`	Whether the queue should be created automatically during send / get.	`true`
`buffer_size`	Number of messages to prefetch	9
`debug`	If `true` it logs all HTTP requests and responses (it impacts performance)	`false`
`endpoint`	Absolute URL to the SQS service	https://sqs.eu-west-1.amazonaws.com
`poll_timeout`	Wait for new message duration in seconds	0.1
`queue_name`	Name of the queue	messages
`region` `secret_key`	Name of the AWS region AWS secret key	eu-west-1
`visibility_timeout`	Amount of seconds the message will not be visible (Visibility Timeout)	Queue's configuration
`wait_time`	Long polling duration in seconds	20

5.3

The debug option was introduced in Symfony 5.3.

Note

The wait_time parameter defines the maximum duration Amazon SQS should wait until a message is available in a queue before sending a response. It helps reducing the cost of using Amazon SQS by eliminating the number of empty responses.

The poll_timeout parameter defines the duration the receiver should wait before returning null. It avoids blocking other receivers from being called.

Note

If the queue name is suffixed by .fifo, AWS will create a FIFO queue. Use the stamp Symfony\\Component\\Messenger\\Bridge\\AmazonSqs\\Transport\\AmazonSqsFifoStamp to define the Message group ID and the Message deduplication ID.

FIFO queues don't support setting a delay per message, a value of delay: 0 is required in the retry strategy settings.

Serializing Messages

When messages are sent to (and received from) a transport, they're serialized using PHP's native serialize() & unserialize() functions. You can change this globally (or for each transport) to a service that implements Symfony\\Component\\Messenger\\Transport\\Serialization\\SerializerInterface:

# config/packages/messenger.yaml
framework:
    messenger:
        serializer:
            default_serializer: messenger.transport.symfony_serializer
            symfony_serializer:
                format: json
                context: { }

        transports:
            async_priority_normal:
                dsn: # ...
                serializer: messenger.transport.symfony_serializer

<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:framework="http://symfony.com/schema/dic/symfony"
    xsi:schemaLocation="http://symfony.com/schema/dic/services
        https://symfony.com/schema/dic/services/services-1.0.xsd
        http://symfony.com/schema/dic/symfony
        https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">

    <framework:config>
        <framework:messenger>
            <framework:serializer default-serializer="messenger.transport.symfony_serializer">
                <framework:symfony-serializer format="json">
                    <framework:context/>
                </framework:symfony-serializer>
            </framework:serializer>

            <framework:transport name="async_priority_normal" dsn="..." serializer="messenger.transport.symfony_serializer"/>
        </framework:messenger>
    </framework:config>
</container>

// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;

return static function (FrameworkConfig $framework) {
    $messenger = $framework->messenger();

    $messenger->serializer()
        ->defaultSerializer('messenger.transport.symfony_serializer')
        ->symfonySerializer()
            ->format('json')
            ->context('foo', 'bar');

    $messenger->transport('async_priority_normal')
        ->dsn(...)
        ->serializer('messenger.transport.symfony_serializer');
};

The messenger.transport.symfony_serializer is a built-in service that uses the Serializer component </serializer> and can be configured in a few ways. If you do choose to use the Symfony serializer, you can control the context on a case-by-case basis via the Symfony\\Component\\Messenger\\Stamp\\SerializerStamp (see Envelopes & Stamps).

Tip

When sending/receiving messages to/from another application, you may need more control over the serialization process. Using a custom serializer provides that control. See SymfonyCasts' message serializer tutorial for details.

Customizing Handlers

Manually Configuring Handlers

Symfony will normally find and register your handler automatically <messenger-handler>. But, you can also configure a handler manually - and pass it some extra config -by tagging the handler service with messenger.message_handler

# config/services.yaml
services:
    App\MessageHandler\SmsNotificationHandler:
        tags: [messenger.message_handler]

        # or configure with options
        tags:
            -
                name: messenger.message_handler
                # only needed if can't be guessed by type-hint
                handles: App\Message\SmsNotification

<!-- config/services.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://symfony.com/schema/dic/services
        https://symfony.com/schema/dic/services/services-1.0.xsd">

    <services>
        <service id="App\MessageHandler\SmsNotificationHandler">
             <!-- handles is only needed if it can't be guessed by type-hint -->
             <tag name="messenger.message_handler"
                  handles="App\Message\SmsNotification"/>
        </service>
    </services>
</container>

// config/services.php
use App\Message\SmsNotification;
use App\MessageHandler\SmsNotificationHandler;

$container->register(SmsNotificationHandler::class)
    ->addTag('messenger.message_handler', [
        // only needed if can't be guessed by type-hint
        'handles' => SmsNotification::class,
    ]);

Possible options to configure with tags are:

bus
from_transport
handles
method
priority

Handler Subscriber & Options

A handler class can handle multiple messages or configure itself by implementing Symfony\\Component\\Messenger\\Handler\\MessageSubscriberInterface:

// src/MessageHandler/SmsNotificationHandler.php
namespace App\MessageHandler;

use App\Message\OtherSmsNotification;
use App\Message\SmsNotification;
use Symfony\Component\Messenger\Handler\MessageSubscriberInterface;

class SmsNotificationHandler implements MessageSubscriberInterface
{
    public function __invoke(SmsNotification $message)
    {
        // ...
    }

    public function handleOtherSmsNotification(OtherSmsNotification $message)
    {
        // ...
    }

    public static function getHandledMessages(): iterable
    {
        // handle this message on __invoke
        yield SmsNotification::class;

        // also handle this message on handleOtherSmsNotification
        yield OtherSmsNotification::class => [
            'method' => 'handleOtherSmsNotification',
            //'priority' => 0,
            //'bus' => 'messenger.bus.default',
        ];
    }
}

Binding Handlers to Different Transports

Each message can have multiple handlers, and when a message is consumed all of its handlers are called. But you can also configure a handler to only be called when it's received from a specific transport. This allows you to have a single message where each handler is called by a different "worker" that's consuming a different transport.

Suppose you have an UploadedImage message with two handlers:

ThumbnailUploadedImageHandler: you want this to be handled by a transport called image_transport
NotifyAboutNewUploadedImageHandler: you want this to be handled by a transport called async_priority_normal

To do this, add the from_transport option to each handler. For example:

// src/MessageHandler/ThumbnailUploadedImageHandler.php
namespace App\MessageHandler;

use App\Message\UploadedImage;
use Symfony\Component\Messenger\Handler\MessageSubscriberInterface;

class ThumbnailUploadedImageHandler implements MessageSubscriberInterface
{
    public function __invoke(UploadedImage $uploadedImage)
    {
        // do some thumbnailing
    }

    public static function getHandledMessages(): iterable
    {
        yield UploadedImage::class => [
            'from_transport' => 'image_transport',
        ];
    }
}

And similarly:

// src/MessageHandler/NotifyAboutNewUploadedImageHandler.php
// ...

class NotifyAboutNewUploadedImageHandler implements MessageSubscriberInterface
{
    // ...

    public static function getHandledMessages(): iterable
    {
        yield UploadedImage::class => [
            'from_transport' => 'async_priority_normal',
        ];
    }
}

Then, make sure to "route" your message to both transports:

# config/packages/messenger.yaml
framework:
    messenger:
        transports:
            async_priority_normal: # ...
            image_transport: # ...

        routing:
            # ...
            'App\Message\UploadedImage': [image_transport, async_priority_normal]

<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:framework="http://symfony.com/schema/dic/symfony"
    xsi:schemaLocation="http://symfony.com/schema/dic/services
        https://symfony.com/schema/dic/services/services-1.0.xsd
        http://symfony.com/schema/dic/symfony
        https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">

    <framework:config>
        <framework:messenger>
            <framework:transport name="async_priority_normal" dsn="..."/>
            <framework:transport name="image_transport" dsn="..."/>

            <framework:routing message-class="App\Message\UploadedImage">
                <framework:sender service="image_transport"/>
                <framework:sender service="async_priority_normal"/>
            </framework:routing>
        </framework:messenger>
    </framework:config>
</container>

// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;

return static function (FrameworkConfig $framework) {
    $messenger = $framework->messenger();

    $messenger->transport('async_priority_normal')->dsn(...);
    $messenger->transport('image_transport')->dsn(...);

    $messenger->routing('App\Message\UploadedImage')
        ->senders(['image_transport', 'async_priority_normal']);
};

That's it! You can now consume each transport:

# will only call ThumbnailUploadedImageHandler when handling the message
$ php bin/console messenger:consume image_transport -vv

$ php bin/console messenger:consume async_priority_normal -vv

Caution

If a handler does not have from_transport config, it will be executed on every transport that the message is received from.

Extending Messenger

Envelopes & Stamps

A message can be any PHP object. Sometimes, you may need to configure something extra about the message - like the way it should be handled inside AMQP or adding a delay before the message should be handled. You can do that by adding a "stamp" to your message:

use Symfony\Component\Messenger\Envelope;
use Symfony\Component\Messenger\MessageBusInterface;
use Symfony\Component\Messenger\Stamp\DelayStamp;

public function index(MessageBusInterface $bus)
{
    $bus->dispatch(new SmsNotification('...'), [
        // wait 5 seconds before processing
        new DelayStamp(5000),
    ]);

    // or explicitly create an Envelope
    $bus->dispatch(new Envelope(new SmsNotification('...'), [
        new DelayStamp(5000),
    ]));

    // ...
}

Internally, each message is wrapped in an Envelope, which holds the message and stamps. You can create this manually or allow the message bus to do it. There are a variety of different stamps for different purposes and they're used internally to track information about a message - like the message bus that's handling it or if it's being retried after failure.

Middleware

What happens when you dispatch a message to a message bus depends on its collection of middleware and their order. By default, the middleware configured for each bus looks like this:

add_bus_name_stamp_middleware - adds a stamp to record which bus this message was dispatched into;
dispatch_after_current_bus- see /messenger/dispatch_after_current_bus;
failed_message_processing_middleware - processes messages that are being retried via the failure transport <messenger-failure-transport> to make them properly function as if they were being received from their original transport;
Your own collection of middleware;
send_message - if routing is configured for the transport, this sends messages to that transport and stops the middleware chain;
handle_message - calls the message handler(s) for the given message.

Note

These middleware names are actually shortcut names. The real service ids are prefixed with messenger.middleware. (e.g. messenger.middleware.handle_message).

The middleware are executed when the message is dispatched but also again when a message is received via the worker (for messages that were sent to a transport to be handled asynchronously). Keep this in mind if you create your own middleware.

You can add your own middleware to this list, or completely disable the default middleware and only include your own:

# config/packages/messenger.yaml
framework:
    messenger:
        buses:
            messenger.bus.default:
                # disable the default middleware
                default_middleware: false

                # and/or add your own
                middleware:
                    # service ids that implement Symfony\Component\Messenger\Middleware\MiddlewareInterface
                    - 'App\Middleware\MyMiddleware'
                    - 'App\Middleware\AnotherMiddleware'

<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:framework="http://symfony.com/schema/dic/symfony"
    xsi:schemaLocation="http://symfony.com/schema/dic/services
        https://symfony.com/schema/dic/services/services-1.0.xsd
        http://symfony.com/schema/dic/symfony
        https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">

    <framework:config>
        <framework:messenger>
            <!-- default-middleware: disable the default middleware -->
            <framework:bus name="messenger.bus.default" default-middleware="false"/>

            <!-- and/or add your own -->
            <framework:middleware id="App\Middleware\MyMiddleware"/>
            <framework:middleware id="App\Middleware\AnotherMiddleware"/>
        </framework:messenger>
    </framework:config>
</container>

// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;

return static function (FrameworkConfig $framework) {
    $messenger = $framework->messenger();

    $bus = $messenger->bus('messenger.bus.default')
        ->defaultMiddleware(false);
    $bus->middleware()->id('App\Middleware\MyMiddleware');
    $bus->middleware()->id('App\Middleware\AnotherMiddleware');
};

Note

If a middleware service is abstract, a different instance of the service will be created per bus.

Middleware for Doctrine

1.11

The following Doctrine middleware were introduced in DoctrineBundle 1.11.

If you use Doctrine in your app, a number of optional middleware exist that you may want to use:

# config/packages/messenger.yaml
framework:
    messenger:
        buses:
            command_bus:
                middleware:
                    # each time a message is handled, the Doctrine connection
                    # is "pinged" and reconnected if it's closed. Useful
                    # if your workers run for a long time and the database
                    # connection is sometimes lost
                    - doctrine_ping_connection

                    # After handling, the Doctrine connection is closed,
                    # which can free up database connections in a worker,
                    # instead of keeping them open forever
                    - doctrine_close_connection

                    # wraps all handlers in a single Doctrine transaction
                    # handlers do not need to call flush() and an error
                    # in any handler will cause a rollback
                    - doctrine_transaction

                    # or pass a different entity manager to any
                    #- doctrine_transaction: ['custom']

<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:framework="http://symfony.com/schema/dic/symfony"
    xsi:schemaLocation="http://symfony.com/schema/dic/services
        https://symfony.com/schema/dic/services/services-1.0.xsd
        http://symfony.com/schema/dic/symfony
        https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">

    <framework:config>
        <framework:messenger>
            <framework:bus name="command_bus">
                <framework:middleware id="doctrine_transaction"/>
                <framework:middleware id="doctrine_ping_connection"/>
                <framework:middleware id="doctrine_close_connection"/>

                <!-- or pass a different entity manager to any -->
                <!--
                <framework:middleware id="doctrine_transaction">
                    <framework:argument>custom</framework:argument>
                </framework:middleware>
                -->
            </framework:bus>
        </framework:messenger>
    </framework:config>
</container>

// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;

return static function (FrameworkConfig $framework) {
    $messenger = $framework->messenger();

    $bus = $messenger->bus('command_bus');
    $bus->middleware()->id('doctrine_transaction');
    $bus->middleware()->id('doctrine_ping_connection');
    $bus->middleware()->id('doctrine_close_connection');
    // Using another entity manager
    $bus->middleware()->id('doctrine_transaction')
        ->arguments(['custom']);
};

Other Middlewares

5.3

The router_context middleware was introduced in Symfony 5.3.

Add the router_context middleware if you need to generate absolute URLs in the consumer (e.g. render a template with links). This middleware stores the original request context (i.e. the host, the HTTP port, etc.) which is needed when building absolute URLs.

# config/packages/messenger.yaml
framework:
    messenger:
        buses:
            command_bus:
                middleware:
                    - router_context

<!-- config/packages/messenger.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:framework="http://symfony.com/schema/dic/symfony"
    xsi:schemaLocation="http://symfony.com/schema/dic/services
        https://symfony.com/schema/dic/services/services-1.0.xsd
        http://symfony.com/schema/dic/symfony
        https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">

    <framework:config>
        <framework:messenger>
            <framework:bus name="command_bus">
                <framework:middleware id="router_context"/>
            </framework:bus>
        </framework:messenger>
    </framework:config>
</container>

// config/packages/messenger.php
use Symfony\Config\FrameworkConfig;

return static function (FrameworkConfig $framework) {
    $messenger = $framework->messenger();

    $bus = $messenger->bus('command_bus');
    $bus->middleware()->id('router_context');
};

Messenger Events

In addition to middleware, Messenger also dispatches several events. You can create an event listener </event_dispatcher> to hook into various parts of the process. For each, the event class is the event name:

Symfony\\Component\\Messenger\\Event\\WorkerStartedEvent
Symfony\\Component\\Messenger\\Event\\WorkerMessageReceivedEvent
Symfony\\Component\\Messenger\\Event\\SendMessageToTransportsEvent
Symfony\\Component\\Messenger\\Event\\WorkerMessageFailedEvent
Symfony\\Component\\Messenger\\Event\\WorkerMessageHandledEvent
Symfony\\Component\\Messenger\\Event\\WorkerRunningEvent
Symfony\\Component\\Messenger\\Event\\WorkerStoppedEvent

Multiple Buses, Command & Event Buses

Messenger gives you a single message bus service by default. But, you can configure as many as you want, creating "command", "query" or "event" buses and controlling their middleware. See /messenger/multiple_buses.

Learn more

/messenger/*

Files

messenger.rst

Latest commit

History

messenger.rst

File metadata and controls

Messenger: Sync & Queued Message Handling

Installation

Creating a Message & Handler

Dispatching the Message

Transports: Async/Queued Messages

Routing Messages to a Transport

Doctrine Entities in Messages

Handling Messages Synchronously

Creating your Own Transport

Consuming Messages (Running the Worker)

Deploying to Production

Prioritized Transports

Limit Consuming to Specific Queues

Supervisor Configuration

Retries & Failures

Avoiding Retrying

Forcing Retrying

Saving & Retrying Failed Messages

Multiple Failed Transports

Transport Configuration

AMQP Transport

Doctrine Transport

Beanstalkd Transport

Redis Transport

In Memory Transport

Amazon SQS

Serializing Messages

Customizing Handlers

Manually Configuring Handlers

Handler Subscriber & Options

Binding Handlers to Different Transports

Extending Messenger

Envelopes & Stamps

Middleware

Middleware for Doctrine

Other Middlewares

Messenger Events

Multiple Buses, Command & Event Buses

Learn more