TROUBLESHOOTING.md

Troubleshooting guide

Enable debug logs

This section describes how to increase log verbosity to enable debug logs of various GoVPP components.

core

Set the environment variable DEBUG_GOVPP to any non-empty value.

Example:

DEBUG_GOVPP=y ./bin/rpc-service

To verify that it works, check for the following line in the console output:

DEBU[0000] govpp: debug level enabled

msgid

Assign value msgid to the variable DEBUG_GOVPP.

NOTE: To make msgid debugging work, you must also enable core debugging (in this case, it is enabled automatically, because msgid is a non-emtpy value).

Example:

DEBUG_GOVPP=msgid ./bin/rpc-service

It should output lines similar to this:

DEBU[0000] message "show_version" (show_version_51077d14) has ID: 1380

socketclient

Assign value socketclient to the variable DEBUG_GOVPP.

Example:

DEBUG_GOVPP=socketclient ./bin/rpc-service

To verify that it works, check for the following line in the console output:

DEBU[0000] govpp: debug level enabled for socketclient

msgtable

Assign value msgtable to the variable DEBUG_GOVPP.

NOTE: To make msgtable debugging work, you must also enable socketclient debugging.

NOTE: To assign multiple values to a variable, you can separate the values with a colon.

Example:

DEBUG_GOVPP=socketclient:msgtable ./bin/rpc-service

It should output lines similar to this:

DEBU[0000]  - 1380: "show_version_51077d14"              logger=govpp/socketclient

statsclient

Set the environment variable DEBUG_GOVPP_STATS to any non-empty value.

NOTE: statsclient debugging only works if package go.fd.io/govpp/adapter/statsclient is imported.

Example:

DEBUG_GOVPP_STATS=y ./bin/vpp-proxy server

To verify that it works, check for the following line in the console output:

DEBU[0000] govpp/statsclient: enabled debug mode

proxy

Set the environment variable DEBUG_GOVPP_PROXY to any non-empty value.

NOTE: proxy debugging only works if package go.fd.io/govpp/proxy is imported.

Example:

DEBUG_GOVPP_PROXY=y ./bin/vpp-proxy server

To verify that it works, check for the following line in the console output:

DEBU[0000] govpp/proxy: debug mode enabled

Binapi generator debug logs

You can enable logs separately for vppapi parser and for binapi generator. The binapi generator has two verbosity levels.

To enable parser logs, assign value parser to the variable DEBUG_GOVPP.

To enable the first verbosity level for generator, pass the flag -debug when invoking the generator binary.

To enable the second verbosity level for generator, assign value binapigen to the variable DEBUG_GOVPP.

Examples:

# first verbosity level for generator
./bin/binapi-generator -debug
# maximum logs for all components
DEBUG_GOVPP=parser:binapigen ./bin/binapi-generator

Unknown message error

Symptoms: When you try to send/receive a message, you see unknown message: ... error.

Cause: Incompatibility of messages between VPP binary API and GoVPP's generated Go bindings for binary API (binapi).

Solution 1: Regenerate binapi. Use make target generate-binapi (for VPP installed via package manager) or gen-binapi-local (for locally built VPP) or gen-binapi-docker (independent of local VPP). For more information about the generator, see the generator documentation. After generating binapi, rebuild GoVPP.

Solution 2: Use VPP version that is compatible with GoVPP's binapi. To see for which VPP version the binapi was generated, look at the beginning of any .ba.go file (not _rpc.ba.go).

Connection problems

This section describes various problems when GoVPP tries to connect to VPP.

Socket file does not exist

Symptoms: You see the following error:

ERROR: connecting to VPP failed: VPP API socket file /run/vpp/api.sock does not exist

Probable cause: VPP is not running or it is configured to have the socket at non-default path.

Possible solutions:

• Check if the VPP is running. It may have exited unexpectedly.

• Run the VPP with sudo. It may need root permissions to create the socket.

• Configure the socket path in VPP configuration. Find the file startup.conf (default location: /etc/vpp/startup.conf) or create it if it does not exist and add there the following:

  socksvr {
      socket-name /path/to/api.sock
  }
  

  (change the path to the actual path, the default is /run/vpp/api.sock). Then run the VPP with the -c flag and specify the path to the configuration file. For example, with default locations: /usr/bin/vpp -c /etc/vpp/startup.conf.

  • If you built VPP from source, you can apply the configuration using make with STARTUP_CONF environment variable. For example: STARTUP_CONF=/etc/vpp/startup.conf make run.

  • If VPP outputs a line similar to this: clib_socket_init: bind (fd 9, '/home/user/vpp/api.sock'): No such file or directory, it likely means that the directory for the socket does not exist. If this happens, create the directory manually and restart VPP.

• In GoVPP code that connects to the VPP, use the actual socket path configured by VPP:

  govpp.Connect("/path/to/api.sock")

  (change the path to the actual path).

  • In GoVPP examples, you can usually set the path with the flag -socket or similar (use --help to see the actual flag). For example: ./bin/rpc-service -sock /run/vpp/api.sock.

• If you are running VPP inside Docker container, mount the socket directory as a Docker volume so it can be used from the host. If you use configuration file, also mount the file. For example: docker run -it -v /run/vpp:/run/vpp -v /home/user/vpp/startup.conf:/etc/vpp/startup.conf ligato/vpp-base:22.10

Connection refused

Symptoms: You see the following error:

ERROR: connecting to VPP failed: dial unix /run/vpp/api.sock: connect: connection refused

Probable cause: VPP exited or its configuration changed and you are trying to connect to the now obsolete socket.

Possible solutions: See the solutions in the previous subsection.

Permission denied

Symptoms: You see the following error:

ERROR: connecting to VPP failed: dial unix /run/vpp/api.sock: connect: permission denied

Probable cause: The socket is owned by the root group.

Possible solutions:

• Configure the VPP to create the socket as current user's group. Add the following to the file startup.conf:

  unix {
  	gid <ID>
  }
  

  (replace the <ID> with actual group ID; you can see the ID with id -g).

  • If you are running VPP inside Docker container, run the container as current user's group (but keep the user as root), for example docker run -it -v /run/vpp:/run/vpp -u 0:$(id -g) ligato/vpp-base:22.10. In this case, do NOT use the unix { gid ... } in startup.conf.

• Run GoVPP with sudo.

• Manually change permissions or ownership of the socket file.

Message versioning, deprecated and in-progesss messages

When a GoVPP's message is updated, the message itself is not changed. Instead, a new version of the message is added that has a v2 (or v3, v4, ...) suffix to its name. The old version of the message is then marked as deprecated.

Deprecated messages

If a message is marked as deprecated, it should no longer be used. The message works fine for now, but it may be removed in the future. When a message is deprecated, there is likely available a new version of the message or an another message with a similar behaviour which should be used instead. Also, if some message is not deprecated, but there already exists a new version of the message, the new version should be used, as the older version may soon become deprecated.

For example, here is an excerpt from the file binapi/vhost_user/vhost_user.ba.go (as of 31-Oct-2022):

// CreateVhostUserIf defines message 'create_vhost_user_if'.
// Deprecated: the message will be removed in the future versions
type CreateVhostUserIf struct {
	// ...
}

// ...

// CreateVhostUserIfReply defines message 'create_vhost_user_if_reply'.
// Deprecated: the message will be removed in the future versions
type CreateVhostUserIfReply struct {
	// ...
}

// ...

// CreateVhostUserIfV2 defines message 'create_vhost_user_if_v2'.
type CreateVhostUserIfV2 struct {
	// ...
}

// ...

// CreateVhostUserIfV2Reply defines message 'create_vhost_user_if_v2_reply'.
type CreateVhostUserIfV2Reply struct {
	// ...
}

The messages CreateVhostUserIf and CreateVhostUserIfReply are deprecated and should not be used. Instead, there are new versions of the messages: CreateVhostUserIfV2 and CreateVhostUserIfV2Reply, which should be used.

In-progress messages

When a new message is added, usually it is initially experimental and is marked as in-progress. In this case, an older message should be preferrably used. Later, when the message will be considered stable, the in-progress label will be removed, the message will become recommended to use and the old message may become deprecated.

For example, here is an excerpt from the file binapi/ip/ip.ba.go (as of 31-Oct-2022):

// IPRouteAddDel defines message 'ip_route_add_del'.
type IPRouteAddDel struct {
	// ...
}

// ...

// IPRouteAddDelReply defines message 'ip_route_add_del_reply'.
type IPRouteAddDelReply struct {
	// ...
}

// ...

// IPRouteAddDelV2 defines message 'ip_route_add_del_v2'.
// InProgress: the message form may change in the future versions
type IPRouteAddDelV2 struct {
	// ...
}

// ...

// IPRouteAddDelV2Reply defines message 'ip_route_add_del_v2_reply'.
// InProgress: the message form may change in the future versions
type IPRouteAddDelV2Reply struct {
	// ...
}

In this case, the messages IPRouteAddDel and IPRouteAddDelReply should be used; the messages IPRouteAddDelV2 and IPRouteAddDelV2Reply are in-progress.