diff --git a/CHANGELOG.md b/CHANGELOG.md index 89652790..ec570366 100644 --- a/CHANGELOG.md +++ b/CHANGELOG.md @@ -1,140 +1,140 @@ ## v0.12.0 - - Replaces the semingly unmainted chrono library with the time crate. - - Addresses through this update - - RUSTSEC-2020-0159 (chrono) - - RUSTSEC-2020-0071 (time) - - `ConfigBuilder::set_time_to_local` is replaced by `ConfigBuilder::set_time_offset_to_local`. - - This function requires the new (and by default activated) `local-offset` feature. - - This function may fail, for more information read the docs. - - simplelog will not determine the local offset dynamically anymore, but only once, when this config option is set. - - Due to safety reasons there is no way to provide this property currently. - - `ConfigBuilder::set_time_offset` now takes a `time::UtcOffset` instead of a `chrono::FixedOffset`. - - `ConfigBuilder::set_time_format` has been replaced by three new variants - - `ConfigBuilder::set_time_format_rfc2822` sets the time format to use the format described by rfc2822. - - `ConfigBuilder::set_time_format_rfc3339` sets the time format to use the format described by rfc3339. - - `ConfigBuilder::set_time_format_custom` sets the time format to a custom time format best created using `time::macros::format_description`. - - Runtime provided time format configuration is possible, but difficult due to lifetime constraints. - - Fixing this will require a solution to https://github.com/time-rs/time/issues/429 - - *Note*: The default format is unchanged "[hour]:[minute]:[second]" + - Replaces the semingly unmainted chrono library with the time crate. + - Addresses through this update + - RUSTSEC-2020-0159 (chrono) + - RUSTSEC-2020-0071 (time) + - `ConfigBuilder::set_time_to_local` is replaced by `ConfigBuilder::set_time_offset_to_local`. + - This function requires the new (and by default activated) `local-offset` feature. + - This function may fail, for more information read the docs. + - simplelog will not determine the local offset dynamically anymore, but only once, when this config option is set. + - Due to safety reasons there is no way to provide this property currently. + - `ConfigBuilder::set_time_offset` now takes a `time::UtcOffset` instead of a `chrono::FixedOffset`. + - `ConfigBuilder::set_time_format` has been replaced by three new variants + - `ConfigBuilder::set_time_format_rfc2822` sets the time format to use the format described by rfc2822. + - `ConfigBuilder::set_time_format_rfc3339` sets the time format to use the format described by rfc3339. + - `ConfigBuilder::set_time_format_custom` sets the time format to a custom time format best created using `time::macros::format_description`. + - Runtime provided time format configuration is possible, but difficult due to lifetime constraints. + - Fixing this will require a solution to https://github.com/time-rs/time/issues/429 + - *Note*: The default format is unchanged "[hour]:[minute]:[second]" ## v0.11.0 - - Add colored log levels using `ansi_term` (PR #88, credits to @manio) - - Add target padding (PR #85, credits to @bytebeamio) - - Add optional color and style support using `paris` crate (PR #84, credits to @manio) + - Add colored log levels using `ansi_term` (PR #88, credits to @manio) + - Add target padding (PR #85, credits to @bytebeamio) + - Add optional color and style support using `paris` crate (PR #84, credits to @manio) ## v0.10.2 - - Fix flushing with `BufferedStandardStreams` (PR #82, credits to @mrkline) + - Fix flushing with `BufferedStandardStreams` (PR #82, credits to @mrkline) ## v0.10.1 - - Fix TermLogger performance using `termcolor::BufferedStandardStream` (PR #80, credits to @mrkline) - - Add write thread name support for `termlog` (PR #76, credits to @zeroflaw) + - Fix TermLogger performance using `termcolor::BufferedStandardStream` (PR #80, credits to @mrkline) + - Add write thread name support for `termlog` (PR #76, credits to @zeroflaw) ## v0.10.0 - - Fix wrong argument naming (PR #70, credits to @scvalex) - - *Breaking*: More color customization options (PR #72, credits to @mrkline) - - Clarify docs on config levels + - Fix wrong argument naming (PR #70, credits to @scvalex) + - *Breaking*: More color customization options (PR #72, credits to @mrkline) + - Clarify docs on config levels ## v0.9.0 - - Add customizable level label colors (PR #69. credits to @JarrettBillingsley) - - Remove unneeded TermLogError - - Future-proof config by adding `#[non_exhaustive]` - - Fix compiling with minimal-versions + - Add customizable level label colors (PR #69. credits to @JarrettBillingsley) + - Remove unneeded TermLogError + - Future-proof config by adding `#[non_exhaustive]` + - Fix compiling with minimal-versions ## v0.8.0 - - Switch from `term` to `termcolor` (PR #59. credits to @raybritton) - - Fix typo in docs (PR #58, credits to @anthonyjmartinez) - - Switch default padding to `Off`. Padding is annoyingly controversal, just set it to whatever you prefer, if you want it. + - Switch from `term` to `termcolor` (PR #59. credits to @raybritton) + - Fix typo in docs (PR #58, credits to @anthonyjmartinez) + - Switch default padding to `Off`. Padding is annoyingly controversal, just set it to whatever you prefer, if you want it. ## v0.7.6 - - Derive `Clone`,`Copy`,`PartialEq`,`Eq`,`Debug` and `Hash` for `TerminalMode`. (PR #56, credits to @panhania) + - Derive `Clone`,`Copy`,`PartialEq`,`Eq`,`Debug` and `Hash` for `TerminalMode`. (PR #56, credits to @panhania) ## v0.7.5 - - Use `target()` instead of `module_path()` for filtering as suggested by `log`s docs. (PR #52, credits to @tsidea) - - Allow logging thread names and pad thread ids (defaults match the old behaviour). (PR #53, credits to @mulark) + - Use `target()` instead of `module_path()` for filtering as suggested by `log`s docs. (PR #52, credits to @tsidea) + - Allow logging thread names and pad thread ids (defaults match the old behaviour). (PR #53, credits to @mulark) ## v0.7.4 - - Fixed time formats with + - Fixed time formats with ## v0.7.3 - - Fixed `test` feature + - Fixed `test` feature ## v0.7.2 - - Allow Level Padding to be configured + - Allow Level Padding to be configured ## v0.7.1 - - Fix `LevelFilter:Off` not turning off parts of the log messages + - Fix `LevelFilter:Off` not turning off parts of the log messages ## v0.7.0 - - Add local time zone option - - Change config to builder pattern avoiding future major version bumps - - Add further documentation about dealing with `TermLogger` failing - - `term` 0.6.* is now also supported + - Add local time zone option + - Change config to builder pattern avoiding future major version bumps + - Add further documentation about dealing with `TermLogger` failing + - `term` 0.6.* is now also supported ## v0.6.0 - - Add time offset parameter (defaults to UTC) - - Add thread_id output (credits to @kurtlawrence) - - Pad log level - - Add TestLogger (credits to @AlexW-GH) - - Add stream configuration to TermLogger - - Implement allow- and ignore-filtering (credits to @ryankurte) + - Add time offset parameter (defaults to UTC) + - Add thread_id output (credits to @kurtlawrence) + - Pad log level + - Add TestLogger (credits to @AlexW-GH) + - Add stream configuration to TermLogger + - Implement allow- and ignore-filtering (credits to @ryankurte) ## v0.5.3 - - Fix minimal chrono version / update to chrono v0.4.1 (PR #27, credits to @samueltardieu) + - Fix minimal chrono version / update to chrono v0.4.1 (PR #27, credits to @samueltardieu) ## v0.5.2 - - Don't interleave stdout and stderr (PR #23, credits to @hansjorg) + - Don't interleave stdout and stderr (PR #23, credits to @hansjorg) ## v0.5.1 - - Updated `simplelog` to `log` 0.4.1 - - Updated `simplelog` to `term` 0.5.1 - - Fixed compiler warning about unused `#[macro_use]` + - Updated `simplelog` to `log` 0.4.1 + - Updated `simplelog` to `term` 0.5.1 + - Fixed compiler warning about unused `#[macro_use]` ## v0.5.0 - - Update `simplelog` to `log` 0.4 + - Update `simplelog` to `log` 0.4 ## v0.4.4 - - Fixed building non-default feature sets + - Fixed building non-default feature sets ## v0.4.3 - - Publically export TermLogger Error type + - Publically export TermLogger Error type ## v0.4.2 - - Removed a debug println! statement + - Removed a debug println! statement ## v0.4.1 - - Fix `None` config value + - Fix `None` config value ## v0.4.0 - - `Config` is not using `LogLevelFilter` anymore but `Option` - - `None` represents no logging of the `Config` parameter at all - - `LogLevelFilter::Off` was supposed to provide this feature, but is actually - ordered higher then `LogLevelFilter::Error`, and presents *no filtering* instead - of the incorrectly assumed *filter everything*. + - `Config` is not using `LogLevelFilter` anymore but `Option` + - `None` represents no logging of the `Config` parameter at all + - `LogLevelFilter::Off` was supposed to provide this feature, but is actually + ordered higher then `LogLevelFilter::Error`, and presents *no filtering* instead + of the incorrectly assumed *filter everything*. ## v0.3.0 - - Merged PullRequest by *Antoni Boucher* - Avoid unwrapping in `TermLogger`: - - `TermLogger::new` now returns an Option - - `TermLogger::init` now has its own ErrorType - - Move FileLogger to WriteLogger - - More generic, accepts not only `File`, but everything that implements `Write` - - Loggers now initialize with a `Config` struct, that list, what parts of the typical log message shall be printed, at which levels - - Migrate from `::init(level, ...)` to `::init(level, Config::default(), ...)` - - Migrate from `::new(level, ...)` or `::new(level, Config::default(), ...)` - - Exception: `CombinedLogger` has no use for its own `Config` and does not take the new argument - - Optionally use rust's `Default` syntax to override some settings - - E.g. always print location: `Config { location: LogLevelFilter::Error, ..Default::default() }` - - E.g. never print the target: `Config { target: LogLevelFilter::Off, ..Default::default() }` - - Target does now by default only log for Debug and lower - - Added CHANGELOG - - Removed some internal code duplication + - Merged PullRequest by *Antoni Boucher* - Avoid unwrapping in `TermLogger`: + - `TermLogger::new` now returns an Option + - `TermLogger::init` now has its own ErrorType + - Move FileLogger to WriteLogger + - More generic, accepts not only `File`, but everything that implements `Write` + - Loggers now initialize with a `Config` struct, that list, what parts of the typical log message shall be printed, at which levels + - Migrate from `::init(level, ...)` to `::init(level, Config::default(), ...)` + - Migrate from `::new(level, ...)` or `::new(level, Config::default(), ...)` + - Exception: `CombinedLogger` has no use for its own `Config` and does not take the new argument + - Optionally use rust's `Default` syntax to override some settings + - E.g. always print location: `Config { location: LogLevelFilter::Error, ..Default::default() }` + - E.g. never print the target: `Config { target: LogLevelFilter::Off, ..Default::default() }` + - Target does now by default only log for Debug and lower + - Added CHANGELOG + - Removed some internal code duplication ## v0.2.0 - - Local changes that (accidentially) made it to crates.io, but not git - - Basically a worse version of *Antoni Boucher* 0.3.0 changes - - Got noticed, when he made a Pull Request + - Local changes that (accidentially) made it to crates.io, but not git + - Basically a worse version of *Antoni Boucher* 0.3.0 changes + - Got noticed, when he made a Pull Request - Sorry, what a mess. If you still have that version, here are the docs: - https://docs.rs/simplelog/0.2.0/ + Sorry, what a mess. If you still have that version, here are the docs: + https://docs.rs/simplelog/0.2.0/ ## v0.1.0 - - Initial Release + - Initial Release